S pump ranges 54 – 70, - · PDF fileLarge, powerful pumps for handling unscreened raw sewage Grundfos offers a full range of extremely depend-able, powerful sewage pumps, designed

S pump ranges 54 – 70,15 – 155 kW

GRUNDFOS WASTEWATER

Large, powerful pumps forhandling unscreened raw sewageGrundfos offers a full range of extremely depend-able, powerful sewage pumps, designed for handling unscreened raw sewage. Our more than forty years experience in providing specialised pumps and pumping equipment for all kinds of wastewater and sewage has taught us what our customers demand from a sewage pump:

Grundfos

> 2

Powerful advantages

> Higher pump efficiency over timeState-of-the-art technology makes the Grundfos pumps extremely efficient and highly dependable. Innovative features such as the unique SmartTrim adjustment of impeller clearance provide low Cost of Ownership.

> Less downtimeThe excellent solids handling capability of our channel-impeller pumps guarantees maximum operating time and substantial reductions in main-tenance costs caused by pump jamming or clogging.

> Lifelong reliabilityThe sturdy sewage pumps are designed for continuous pumping under the most difficult operating conditions. The well-proven design is based on our long experience in the waste-water business.

At Grundfos we maintain a close dialogue with our customers to constantly improve pump design and performance. Only this way can we build the long-lasting partnerships on which our business is founded.

Installation options

> 3

Submerged installation on auto-coupling, types 1 and 2Submerged installation on auto-coupling system requires a base plate with a 90° bend, fixed to the bottom of the pit. When lowered into the pit along the guide rails, the pump automatically connects to the base plate. The flexible neoprene SmartSeal ensures a leak-proof connection between the pump and the auto-coupling.

Type 1: To prevent sedimentation of sludge in connection with intermittent operation, we recommend a stop level corresponding to the top of the pump housing. For sufficient cooling in connection with continuous operation, the liquid level must always be above the middle of the motor.

Type 2: Motor cooling is independent of the pumped liquid level, thanks to separate motor cooling.

Vertical dry installation, type 3The Grundfos sewage pumps can be installed either vertically or horizontally to suit specific application arrangements. All pumps are 100% watertight, allowing for dry installation with the workspace around the pump remaining clean and dry. The pumps are fully flood-proof if an unexpected flooding should occur.

Motor cooling takes place by means of a cooling jacket.

Submerged installation, portable, types 4 and 5Certain applications, such as construction sites, require portable submersibles. Where a portable submersible is required, hoses of varying lengths and materials can be supplied.

Type 4: To prevent sedimentation of sludge in connection with intermittent operation, we recommend a stop level corresponding to the top of the pump housing. For sufficient cooling in connection with continuous operation, the liquid level must always be above the middle of the motor.

Type 5: Motor cooling is independent of the pumped liquid level, thanks to separate motor cooling.

Horizontal dry installation, type 6Horizontal dry installation improves the overall efficiency of the system as unneces-sary components and bends are avoided. The feasibility of horizontal dry installation depends on the floor space available as the system takes up slightly more space than a vertically installed pump.

Motor cooling takes place by means of a cooling jacket.

Powerful pumps

4

The Grundfos submersible sewage pumps are designed to reduce energy consumption and to keep downtime costs at a minimum. Maintaining peak efficiency throughout the entire lifetime of the system is a key issue:

Watertight encapsulated motor,insulation class F (155°C), enclosureclass IP 68, with three thermalsensors in the stator windings.

Lower bearings comprise a doublebearing. Certain models feature anadditional radial bearing.

Shaft seal condition monitoring.The WIO, Water-in-Oil sensorplaced in the oil housing gives early warning of seal leakage (optional).

The Grundfos SmartSeal gasket system provides a completely leak-proof connection.

Double mechanical shaft seal system in intermediate oil chamber for reliable sealing between the pumped liquid and themotor. Primary seal with SiC/SiC rings, and SiC/carbon rings in the secondary seal.

− with unique technology

5 Details >

Watertight cable entry of corrosion-resistant polya-

mide, or cast iron with soft shapes to prevent damage

to the power cable.

In horizontal or vertical dry installations, Grundfos pumps are

equipped with a cooling jacket. (See page 7 for more details).

Dynamically balanced pump shaft of stainless steel or fully

protected against contact with pumped liquid. Conical

shaft end for safe securing of impeller.

SmartTrim systemallows easy adjustment

of factory-set impellerclearance, maintaining

maximum pump efficiency.

Moisture detector continuously monitors the motor enclosure, and automatically cuts off thepower in the event of leakage.

�

�

�

�

�

��

��

� � � �

��

��

��

��

��

�

�

�

�

6

Position of SmartTrim system for horizontally dry installed pumps. Position of SmartTrim system on vertically submerged pumps.

SmartTrim impeller clearance adjustment

The Grundfos heavy-duty sewage pumps are de-signed to reduce energy consumption and to keep down operating costs at a minimum. Therefore, maintaining peak pumping efficiency throughout the entire lifetime of the system is a key issue.

Sand, grit and other abrasives cause impeller wear in any pump. As a result, impeller clearance increases, reducing pump efficiency. Increased impeller clear-ance means more back-flow leakage and a higher risk of jamming.

SmartTrim system– fast, easy and efficientOn conventional pumps, maintaining factory-set impeller clearance is a time-consuming and costly task. The pumps need to be disconnected from the pipework and to be totally dismantled, and new parts need to be mounted in order to maintain full pumping efficiency. Not so with Grundfos SmartTrim!

All Grundfos heavy-duty channel-impeller pumps, whether for submerged or dry installation, are equipped with the unique SmartTrim impeller clearance adjustment system. This enables you to

easily restore factory-set impeller clearance and maintain peak pumping efficiency. All you need to do is to tighten the adjustment screws on the exterior of the impeller housing. This can be done on site, quickly and easily, without dismantling the pump and without using special tools.

SmartTrim impellers >

Grundfos SmartTrim impellers

Grundfos channel impellers

7 Channel impellers >

Large free passage for superior solids handlingCompromising on the ability to handle solids in order to obtain higher pumping efficiency substantially increases the risk of clogging. More clogging means more downtime and increased operating costs.

The Grundfos channel-impeller pumps are capable of handling solids up to Ø 145 mm. The full free passage, however, is much larger. The result is less clogging and less downtime.

Non-clogging impeller vane designConventional double-channel impellers are suscept-ible to clogging, as fibrous material tends to enter both channels and get caught on the leading edge. But thanks to the recessed leading edge design of the Grundfos double-channel impeller, the problem of clogging is virtually eliminated.

Tested under real conditions, this special double-channel impeller design combined with a free passage of minimum 100 mm enable the Grundfos double-channel impellers to handle unscreened sewage in heavy-duty applications. Maximum efficiency is 80-85%.

Semi-axial impeller design with long vaneThe length of an impeller vane is a key factor in determining the length of fibres that can pass through a pump without getting caught. The Grundfos channel impellers are of a semi-axial design with extra long vanes. This provides maximum performance and eliminates problems with fibres or rags getting caught in the impeller.

Material specification

8 Technical data >

Advanced shaft seal designOn the heavy-duty Grundfos pumps, the shaft seals are kept in place by means of springs protected from contact with the pumped liquid. Automatic removal of air and grit from the seal area, in combination with silicon carbide primary seal faces guarantee trouble-free operation and extended pump life.

Motor cooling in dry installationsIn dry installations, efficient motor cooling is essential. On the Grundfos heavy-duty sewage pumps this is achieved by a cooling jacket that fully encases the stator housing. During pump operation, some of the pumped liquid is led into the cooling jacket via a cutting clearance behind the impeller. A screening system prevents solids from entering the cooling jacket.

Material specification

Operating conditions

• Maximum ambient temperature and pumped liquid temperature: +40°C

• Storage temperature range: –30°C to +60°C

• Maximum submergence: 20 m

• Voltage tolerance for 50 Hz motors: ± 10%

Maximum starting frequencyThe starting frequency should not exceed 15 starts per hour.

The shaft seals are capable of rotating in either direction. This means that sludge sedimentation can be avoided by back flushing the system at regular intervals, provided that the pumps are installed with separate pipe work, and without non-return valves.

Part Material DIN/EN AISI

Stator housing Cast iron EN-JL1040 -

Pump housing Cast iron EN-JL1040 -

Impeller Impeller cast iron/ductile iron EN-JL1040 -

Pump shaft, pump ranges 58 and 62 Stainless steel 1.4460 329

Pump shaft, pump ranges 66 and 70* Steel 1.7225 -

Bolts and nuts Stainless steel 1.4436 316

Cooling jacket, pump ranges 58 and 62 Ductile iron EN-JS1050 80-55-06

Cooling jacket, pump ranges 66 and 70 Hot dip galvanized steel Rst 37-2 -

O-rings NBR - -

O-rings, mechanical shaft seal FKM - -

Bearings Heavy-duty prelubricated ball or roller bearings - -

Primary shaft seal SiC/SiC - -

Secondary shaft seal SiC/carbon - -

Lifting bracket Hot dip galvanized steel Rst 37-2 -

Cables EPDM - -

Cable entry PA/cast iron - -

Surface protection 150 my two-component epoxy coating - -

Oil SAE 10 W 30 - -

*Shaft is not in contact with pumped liquid.

Grundfos Sensors

Technical data > 9

WIO sensor signals:

WarningA signal is given but the pump continues to run

Alarm An alarm is given and the pump is stopped

3.5 mA Alarm: air in oil chamber

4-20 mA 0-20% water in oil

22 mAWarning: amount of water in oil exceeds 20%

Unique analogue water-in-oil sensor (optional)The analogue water-in-oil (WIO) sensor is unique to Grundfos pumps. The WIO sensor constantly monitors the contents of water in the intermediate oil chamber of the sewage pumps.

One of the most common problems in sewage pumps − and the most common reason for pump breakdowns − is water entering the motor through a leaking shaft seal. A sure sign of a leaking shaft seal is the presence of water in the intermediate oil chamber.

With a common digital sensor there are no “in-betweens”. If a digital sensor detects water in the oil, it will signal the pump to stop whether the situation is critical or not.

The new Grundfos analogue WIO sensor constantly measures the amount of water in the oil. Within 0-20%, a warning limit can be set to 4, 8, 12, 16 or 20% water in oil content. In this case the Grundfos WIO sensor will activate a warning signal so that the pump can be serviced in due time.

If the amount of water rises to more than 20% this is critical to the pump, and the sensor will activate a warning, but the pump will keep operating.

As another unique feature, the Grundfos WIO sensor is also able to detect if the oil chamber is leaking oil. If the amount of oil in the chamber falls below a criti-cal level, the sensor will activate an alarm and stop.

The Grundfos water-in-oil sensor is connected to the Grundfos IO 111 module.

These sensor data are shown on the front of the module:

Pos. Symbol Description

6 Stator temperature

7 Stator insulation resistance

8 Water in oil indication

12 Pump running

13 Moisture in pump

15 Pump fault

Grundfos IO 111 moduleThe Grundfos IO 111 module is a part of the Grundfos Modular Controls system. The IO 111 module forms an interface between the Grundfos sewage pump with built-in analogue and digital sensors and the pump control system.

10 Technical data >

Grundfos Modular Controls

Grundfos Modular ControlsThe Modular Controls system is the first fully inte-grated multi-function control system from Grundfos. The Modular Controls have been developed specific-ally for use in pumping systems in sewage and wastewater applications.

The Grundfos Modular Controls are equally suitable for new or existing systems – regardless of type or make of the pumps. The Modular Controls system unites state-of-the-art technology with a modular construction and an extremely user-friendly interface.

The modular construction of the system ensures a high level of interactive control of all types of pumps. The system has been designed for continuous ex-pansion and add-ons as the need changes. Additional modules can be clicked in place in a matter of seconds, and software that matches the new requirements can easily be installed.

Contact Grundfos for further information on the revolutionary new Modular Controls system.

�

�

�

��

�

�

�

�

� ��

�

�

�

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

11 Technical data >

Performance overview and type key

Performance overview – Grundfos range of submersible sewage pumps

Note!The technical data and curves on pages 11, 12, 13, and 14 apply to pumps in installation type 1 (submerged installation with baseplate and bend) only. Data and curves for other installation types, as well as for explosion-proof pumps, may vary. Consult Grundfos for details or visit our site on www.grundfos.com.

Type key

� ��

�

�

�

�

��

��

��

��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

�

�

�

�

�

�

�

�

� ��

�

�

�

�

��

��

��

��

��

��

� ��

��

��

��

��

��

��

Pump curveSubmerged instalation

Dry instalationSubmerged instalation,

portableMotor

No.Pump type

Pumprange

Max. solids size [mm]

Outlet [mm]

Weight[kg]

InletDN

OutletDN

Weight[kg]

Hose[mm]

Weight[kg]

PN

[kW]N

N[min-1]

IN

400 V[A]

IS/I

N

1 S3 1512 62 Ø 120 Ø 300 860 400 Ø 300 860 - - 15.0 490 37.0 4.0

2 S2 208 62 Ø 145 Ø 300 780 400 Ø 300 780 - - 20.0 740 41.0 6.6

3 S2 288 62 Ø 145 Ø 300 900 400 Ø 300 900 - - 28.0 730 55.0 4.9

4 S2 224 AL 58 Ø 100 Ø 200 510 250 Ø 200 510 Ø 200 510 22.0 1460 44.0 6.1

5 S2 304 AL 62 Ø 100 Ø 200 650 250 Ø 200 650 - - 30.0 1480 67.0 6.9

6 S2 264 AL 58 Ø 100 Ø 200 510 250 Ø 200 510 Ø 200 510 26.0(28.0) 1450 50.2(55.6) 5.2(4.7)

7 S2 404 AL 62 Ø 100 Ø 200 695 250 Ø 200 695 - - 41.0(43.0) 1460 84.7(87.0) 5.8(5.6)

8 S2 504 AL 62 Ø 100 Ø 200 720 250 Ø 200 720 - - 50.0 1470 101.4 5.2

9 S2 156 E 58 Ø 100 Ø 300 600 250 Ø 300 600 Ø 300 600 16.0 970 38.2 5.5

10 S2 226 E 58 Ø 100 Ø 300 590 250 Ø 300 590 Ø 300 590 22.5 960 48.6 4.3

11 S2 304 E 62 Ø 100 Ø 300 660 250 Ø 300 660 - - 30.0 1480 67.0 6.9

12 S2 404 E 62 Ø 100 Ø 300 725 250 Ø 300 725 - - 41.0(43.0) 1460 84.7(87.0) 5.8(5.6)

13 S2 504 E 62 Ø 100 Ø 300 780 250 Ø 300 780 - - 50.0 1470 101.4 5.2

(): Motor data in brackets apply to installations 2, 3, 5 and 6.

Low head, ranges 58 and 62 Low head, E hydraulic, ranges 58 and 62

Electrical and technical data

S pump range, modular conceptThe Grundfos heavy-duty sewage pumps are of a modular design, meaning that pumps belonging to the samerange share many common spare parts. This allows for interchangeability of impellers and other hydraulics.


Technical data > 12

� ��

�

�

�

�

��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

� �

��

��

� ��

� ��

�

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��



portableMotor

No.Pump type

Pumprange


Outlet [mm]

Weight[kg]

InletDN

OutletDN

Weight[kg]

Hose[mm]

Weight[kg]

PN

[kW]N

N[min-1]

IN

400 V[A]

IS/I

N

1 S3 2210 L 66 115x140 Ø 500 830 500 Ø 500 830 - - 22.0 590 55.0 5.1

2 S3 3510 E 66 125x163 Ø 600 1000 500 Ø 600 1000 - - 35.0 590 79.5 4.7

3 S3 3510 L 66 115x140 Ø 500 1000 500 Ø 500 1000 - - 35.0 580 79.5 4.7

4 S3 508 L 66 115x140 Ø 500 1300 500 Ø 500 1300 - - 50.0 730 101.2 5.4

5 S3 508 E 66 125x163 Ø 600 1400 500 Ø 600 1400 - - 50.0 730 101.2 5.4

6 S3 658 E 70 125x163 Ø 600 1700 500 Ø 600 1700 - - 65.0 730 129.0 5.2

7 S3 658 L 70 115x140 Ø 500 1590 500 Ø 500 1590 - - 65.0 730 121.0 6.1

8 S3 1006 L 70 115x140 Ø 500 1870 500 Ø 500 1870 - - 100.0 980 121.0 6.1

9 S3 1306 E 70 125x163 Ø 600 2000 500 Ø 600 2000 - - 130.0 980 249.3 7.9

10 S3 1306 L 70 115x140 Ø 500 1830 500 Ø 500 1830 - - 130.0 980 249.3 7.9

11 S2 554 BM 66 Ø 100 Ø 200 760 250 Ø 200 760 - - 58.0 1480 116.4 7.2

12 S2 654 BM 66 Ø 100 Ø 200 840 250 Ø 200 840 - - 68.0 1480 134.9 6.3

13 S2 654 AL 66 110x130 Ø 250 840 300 Ø 250 840 - - 68.0 1480 134.9 6.3

14 S2 854 AM 70 Ø 100 Ø 200 1090 250 Ø 200 1090 - - 85.0 1480 152.9 6.8

15 S2 1154 M 70 100x110 Ø 200 1480 250 Ø 200 1480 - - 115.0 1480 210.0 6.8

16 S2 1604 M 70 100x110 Ø 200 1350 250 Ø 200 1350 - - 155.0 1480 278.0 7.5

17 S2 1604 L 70 Ø 110 Ø 250 1430 300 Ø 250 1430 - - 155.0 1480 278.0 7.5

Technical data > 13


Low head, ranges 66 and 70 Low and medium head, ranges 66 and 70

� ��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

� ��

��

��

��

�

� � � ��

��

��

��

� ��

�

�

��

��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

��

��



portableMotor

No.Pump type

Pumprange


Outlet [mm]

Weight[kg]

InletDN

OutletDN

Weight[kg]

Hose[mm]

Weight[kg]

PN

[kW]N

N[min-1]

IN

400 V[A]

IS/I

N

1 S1 224 M 58 Ø 110 Ø 150 475 200 Ø 125 475 Ø 150 475 22.0 1458 43.0 6.1

2 S1 264 M 58 Ø 110 Ø 150 460 200 Ø 125 460 Ø 150 460 26.0(28.0) 1446 50.2(56) 5.2(4.7)

3 S1 304 M 62 100x120 Ø 150 650 200 Ø 125 650 - - 30.0 1482 67.0 6.9

4 S1 224 H 58 Ø 80 Ø 150 470 150 Ø 125 470 Ø 150 470 22.0 1458 43.0 6.1

5 S1 264 H 58 Ø 80 Ø 150 460 150 Ø 125 490 Ø 150 460 26.0(28.0) 1446 50.2(55.6) 5.2(4.7)

6 S1 304 H 62 Ø 80 Ø 150 670 150 Ø 125 670 - - 30.0 1482 67.0 6.9

7 S1 404 M 62 100x120 Ø 150 635 200 Ø 125 635 - - 41.0(43.0) 1464 84.7(87.0) 5.8(5.6)

8 S1 504 M 62 100x120 Ø 150 640 200 Ø 125 650 - - 50.0 1470 101.0 5.2

9 S1 404 H 62 Ø 80 Ø 150 650 150 Ø 125 650 - - 41.0(43.0) 1464 84.7(87.0) 5.8(5.6)

10 S1 504 H 62 Ø 80 Ø 150 650 150 Ø 125 650 - - 50.0 1470 101.0 5.2

11 S2 358 M 66 Ø 145 Ø 300 965 300 Ø 300 965 - - 35.0 732 75.9 4.9

12 S3 508 M 66 120x140 Ø 300 1100 400 Ø 300 1100 - - 50.0 726 101.2 5.4

13 S3 658 M 70 120x140 Ø 300 1520 400 Ø 300 1520 - - 65.0 732 121.0 6.1

14 S3 806 M 70 120x140 Ø 300 1520 400 Ø 300 1520 - - 80.0 988 154.2 8.1

15 S3 1006 M 70 120x140 Ø 300 1350 400 Ø 300 1350 - - 100.0 984 188.5 6.6

16 S3 1306 M 70 120x140 Ø 300 1520 300 Ø 300 1520 - - 130.0 984 249.3 7.9

17 S2 508 H 66 Ø 120 Ø 250 1110 300 Ø 250 1110 - - 50.0 726 101.2 5.4

18 S2 658 H 70 Ø 120 Ø 250 1200 300 Ø 250 1200 - - 65.0 732 121.0 6.1

19 S2 806 H 70 Ø 120 Ø 250 1370 300 Ø 250 1370 - - 80.0 988 154.2 8.1

20 S2 1006 H 70 Ø 120 Ø 250 1320 300 Ø 250 1320 - - 100.0 984 188.5 6.6

21 S2 1306 H 70 Ø 120 Ø 250 1320 300 Ø 250 1320 - - 130.0 984 249.3 7.9

(): Motor data in brackets apply to installations 2, 3, 5 and 6.


Medium and high head, ranges 58 and 62 Medium and high head, ranges 66 and 70

14 Technical data >


� ��

�

��

��

��

��

��

��

��

��

��

��

� ��

� � � �

� �

��

��

��

��

��



portableMotor

No.Pump type

Pumprange


Outlet [mm]

Weight[kg]

InletDN

OutletDN

Weight[kg]

Hose[mm]

Weight[kg]

PN

[kW]N

N[min-1]

IN

400 V[A]

IS/I

N

1 S1 654 AH 66 Ø 100 Ø 200 830 250 Ø 200 830 - - 68.0 1480 134.0 6.3

2 S1 854 H 70 Ø 100 Ø 200 950 250 Ø 200 950 - - 85.0 1480 152.9 6.8

3 S2 1154 H 70 Ø 100 Ø 200 950 250 Ø 200 950 - - 115.0 1480 210.0 6.8

4 S2 1604 H 70 Ø 100 Ø 200 1350 250 Ø 200 1350 - - 155.0 1480 278.0 7.5

5 S2 1154 S 70 Ø 90 Ø 200 950 250 Ø 200 950 - - 115.0 1480 210.0 6.8

6 S2 1604 S 70 Ø 90 Ø 200 1350 250 Ø 200 1350 - - 155.0 1480 278.0 7.5

15 Technical data >

High and super-high head, ranges 66 and 70


Pump range/type

Dimensions [mm]DN A B C D E F G H K L M N O ØP ØR ØS ØT U V X Y ØZ

S pump range 58S2 224 AL 200 1410 1195 215 1010 640 290 345 265 250 400 540 600 100 285 285 22 28 460 265 140 20 88S2 264 AL 200 1410 1195 215 1010 640 290 345 265 250 400 540 600 100 285 285 22 28 460 265 140 20 88S1 224 M 150 1365 1210 155 765 472 225 235 225 250 380 280 500 100 240 285 22 24 320 265 115 165 77S1 264 M 150 1365 1210 155 765 472 225 235 225 250 380 280 500 100 240 285 22 24 320 265 115 165 77S1 224 H 150 1355 1175 180 785 492 225 240 215 250 380 280 500 100 240 285 22 24 320 265 115 165 77S1 264 H 150 1355 1175 180 785 492 225 240 215 250 380 280 500 100 240 285 22 24 320 265 115 165 77S2 156 E 300 1385 1235 150 1230 740 410 470 360 400 400 620 700 150 400 445 23 28 500 420 205 270 88S2 226 E 300 1385 1235 150 1230 740 410 470 360 400 400 620 700 150 400 445 23 28 500 420 205 270 88S pump range 62S2 208 300 1620 1445 175 1310 790 440 525 385 400 400 620 700 150 400 445 23 28 500 420 205 270 88S2 288 300 1620 1445 175 1310 790 440 525 385 400 400 620 700 150 400 445 23 28 500 420 205 270 88S3 1512 300 1620 1445 175 1310 790 440 525 355 400 400 620 700 150 400 445 23 28 500 420 205 270 88S2 304 E 300 1585 1455 130 1390 890 420 485 355 400 400 620 700 150 400 445 23 28 500 420 205 270 88S2 404 E 300 1585 1455 130 1390 890 420 485 355 400 400 620 700 150 400 445 23 28 500 420 205 270 88S2 504 E 300 1585 1455 130 1390 890 420 485 355 400 400 620 700 150 400 445 23 28 500 420 205 270 88S2 304 AL 200 1585 1425 160 1130 750 300 360 275 300 400 540 600 150 295 340 22 28 460 320 140 20 88S2 404 AL 200 1585 1425 160 1130 750 300 360 275 300 400 540 600 150 295 340 22 28 460 320 140 20 88S2 504 AL 200 1585 1425 160 1130 750 300 360 275 300 400 540 600 150 295 340 22 28 460 320 140 20 88S1 304 M 150 1555 1420 135 830 512 250 260 250 250 380 280 500 100 240 285 22 24 320 320 115 165 77S1 404 M 150 1555 1420 135 830 512 250 260 250 250 380 280 500 100 240 285 22 24 320 320 115 165 77S1 504 M 150 1555 1420 135 830 512 250 260 250 250 380 280 500 100 240 285 22 24 320 320 115 165 77S1 304 H 150 1540 1390 150 830 512 250 260 250 250 380 280 500 100 240 285 22 24 320 265 115 165 77S1 404 H 150 1540 1390 150 830 512 250 260 250 250 380 280 500 100 240 285 22 24 320 265 115 165 77S1 504 H 150 1540 1390 150 830 512 250 260 250 250 380 280 500 100 240 285 22 24 320 265 115 165 77S pump range 66S3 508 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000 1100 250 725 780 30 28 800 755 75 30 114S3 3510 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000 1100 250 725 780 30 28 800 755 75 30 114S3 2210 L 500 2000 1680 320 2085 1305 630 715 550 600 700 900 1000 250 620 670 27 28 800 655 75 30 88S3 3510 L 500 2000 1680 320 2085 1305 630 715 550 600 700 900 1000 250 620 670 27 28 800 655 75 30 88S3 508 L 500 2000 1680 320 2085 1305 630 715 550 600 700 900 1000 150 400 445 23 28 500 420 205 270 88S2 358 M 300 1715 1540 175 1310 790 440 525 355 400 400 620 700 150 295 340 22 28 460 320 140 20 88S2 554 BM 200 1670 1485 185 975 550 350 380 290 300 400 540 600 150 295 340 22 28 460 320 140 20 88S2 654 BM 200 1670 1485 185 975 550 350 380 290 300 400 540 600 150 295 340 22 28 460 320 140 20 88

(Cont. next page).

Technical data > 16

Dimensions and installation

Submerged installation on auto-coupling

Pump ranges 58, 62, 66 and 70

17 Technical data >


Pump range/type

Dimensions [mm]DIN A B C D E F G H K L M N O ØP ØR ØS ØT U V X Y ØZ

S pump range 66S3 508 M 300 1915 1765 150 1310 790 440 525 355 400 400 620 700 150 400 445 23 28 500 420 205 270 88S2 508 H 250 1700 1535 165 1365 840 445 480 400 350 400 620 700 150 350 395 23 28 500 370 205 270 88S2 654 AL 250 1685 1515 170 1240 840 320 395 320 350 400 620 700 150 350 395 23 28 500 370 205 270 88S1 654 AH 200 1675 1495 180 1050 690 285 305 290 300 400 540 600 150 295 340 22 28 460 320 140 20 88S pump range 70S3 658 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000 1100 250 725 780 30 28 800 755 75 30 114S3 1306 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000 1100 250 725 780 30 28 800 755 75 30 114S3 658 L 500 2130 1810 320 2085 1305 630 715 550 600 700 900 1000 250 620 670 27 28 800 655 75 30 88S3 1006 L 500 2130 1810 320 2085 1305 630 715 550 600 700 900 1000 250 620 670 27 28 800 655 75 30 8

Submerged installation, portable Pump range 58, 62, 66 and 70Pump range/type

Dimensions [mm]DN A B C D E F G H

S pump range 58S2 224 AL 200 1390 550 1265 345 275 620 815 380S2 264 AL 200 1390 550 1265 345 275 620 815 380S1 224 M 150 1345 550 955 235 225 550 640 360S1 264 M 150 1345 550 955 235 225 550 640 360S1 224 H 150 1315 550 975 240 215 550 620 340S1 264 H 150 1315 550 975 240 215 550 620 340S2 156 E 300 1350 700 1695 470 360 830 970 370S2 226 E 300 1350 700 1695 470 360 830 970 370S pump range 62S2 304 AL 200 1555 700 1435 360 350 710 805 370S2 404 AL 200 1555 700 1435 360 350 710 805 370S2 504 AL 200 1555 700 1435 360 350 710 805 370S1 304 M 150 1540 700 1070 260 250 510 645 365S1 404 M 150 1540 700 1070 260 250 510 645 365S1 504 M 150 1540 700 1070 260 250 510 645 365S1 304 H 150 1530 700 1070 260 250 510 650 370S1 404 H 150 1530 700 1070 260 250 510 650 370S1 504 H 150 1530 700 1070 260 250 510 650 370S pump range 66S2 358 M 300 1765 700 1775 525 355 880 1050 450S2 554 BM 200 1680 700 1235 290 290 580 825 405S2 654 BM 200 1680 700 1235 290 290 580 825 405S3 508 M 300 1765 700 1775 525 355 880 1050 450S2 508 H 250 1760 700 1720 480 390 870 980 460S2 654 AL 250 1700 700 1630 395 320 715 935 415S1 654 AH 200 1695 700 1375 305 290 595 850 415S pump range 70S3 658 M 300 1890 700 1910 570 445 1015 1050 450S3 806 M 300 1890 700 1910 570 445 1015 1050 450S3 1006 M 300 1890 700 1910 570 445 1015 1050 450S3 1306 M 300 1890 700 1910 570 445 1015 1050 450S2 854 AM 200 1805 700 1235 285 285 730 840 405S2 1154 M 200 1830 700 1325 320 290 610 850 415S2 1604 M 200 1830 700 1325 320 290 610 850 415S2 658 H 250 1890 700 1720 480 390 870 980 460S2 806 H 250 1890 700 1720 480 390 870 980 460S2 1006 H 250 1890 700 1720 480 390 870 980 460S1 854 H 200 1820 700 1375 305 290 595 850 415S2 1154 H 200 1825 700 1375 305 290 595 855 420S2 1604 H 200 1825 700 1375 305 290 595 855 420S2 1154 S 200 1980 700 1525 350 310 660 855 420

Vertical dry installation

18 Technical data >


Pump ranges 58, 62, 66 and 70Pump range/type

Dimensions [mm]DN1 DN2 A B C D E F G H ØJ ØK ØL ØM ØN ØP

S pump range 58S2 224 AL 250 200 2112 1106 828 840 550 670 400 30° M20 350 340 295 28 24S2 264 AL 250 200 2112 1106 828 840 550 670 400 30° M20 350 340 295 28 24S1 224 M 200 125 1962 980 697 635 400 470 350 30° M20 295 250 210 24 19S1 264 M 200 125 1962 980 697 635 400 470 350 30° M20 295 250 210 24 19S1 224 H 150 125 1826 853 600 655 420 470 300 30° M20 240 250 210 24 19S1 264 H 150 125 1826 853 600 655 420 470 300 30° M20 240 250 210 24 19S2 156 E 250 300 2120 1140 825 1060 650 830 400 30° M20 350 470 400 28 24S2 226 E 250 300 2120 1140 825 1060 650 830 400 30° M20 350 470 400 28 24S pump range 62S2 208 300 300 2170 1490 1152 1140 700 910 630 30° M24 515 470 400 28 24S2 288 300 300 2170 1490 1152 1140 700 910 630 30° M24 515 470 400 28 24S3 1512 300 300 2170 1490 1152 1140 700 910 630 30° M24 515 470 400 28 24S2 304 E 250 200 2350 1160 825 1220 800 870 400 30° M20 350 370 400 28 24S2 404 E 250 200 2350 1160 825 1220 800 870 400 30° M20 350 370 400 28 24S2 504 E 250 200 2350 1160 825 1220 800 870 400 30° M20 350 370 400 28 24S2 304 AL 250 125 2305 1120 825 960 660 670 400 30° M20 350 340 295 28 24S2 404 AL 250 125 2305 1120 825 960 660 670 400 30° M20 350 340 295 28 24S2 504 AL 250 125 2305 1120 825 960 660 670 400 30° M20 350 340 295 28 24S1 304 M 200 125 2140 968 697 690 440 552 350 30° M20 295 250 210 24 19S1 404 M 200 125 2140 968 697 690 440 552 350 30° M20 295 250 210 24 19S1 504 M 200 125 2140 968 697 690 440 552 350 30° M20 295 250 210 24 19S1 304 H 150 125 2055 895 600 690 440 513 300 30° M20 240 250 210 24 19S1 404 H 150 125 2055 895 600 690 440 513 300 30° M20 240 250 210 24 19S1 504 H 150 125 2055 895 600 690 440 513 300 30° M20 240 250 210 24 19S pump range 66S2 358 M 300 300 2805 1490 1152 1140 700 880 630 30° M24 515 470 400 28 24S2 554 BM 250 200 2335 1065 825 810 460 700 400 30° M20 350 340 295 28 24S2 654 BM 250 200 2335 1065 825 810 460 700 400 30° M20 350 340 295 28 24S3 508 M 300 300 2805 1490 1152 1140 700 880 630 30° M24 515 470 400 28 24S2 508 H 300 250 2410 1110 855 1190 750 870 450 30° M20 400 395 350 28 24S2 654 AL 300 250 2395 1110 855 1070 750 715 450 30° M20 400 406 350 28 24S1 654 AH 250 200 2335 1075 825 890 600 595 400 30° M20 350 340 295 28 24

(Cont. next page).

Technical data > 19


Pump range/type

Dimensions [mm]DN1 DN2 A B C D E F G H ØJ ØK ØL ØM ØN ØP

S pump range 70S3 658 M 300 300 2930 1490 1152 1275 760 1015 630 30 M24 515 470 400 28 24S3 806 M 300 300 2930 1490 1152 1275 760 1015 630 30 M24 515 470 400 28 24S3 1006 M 300 300 2930 1490 1152 1275 760 1015 630 30 M24 515 470 400 28 24S3 1306 M 300 300 2930 1490 1152 1275 760 1015 630 30 M24 515 470 400 28 24S2 854 AM 250 200 2405 1065 825 810 460 700 400 30 M20 350 340 295 28 24

Vertical dry installation

Pump ranges 66 and 70Pump range/type

Dimensions [mm]DN1 DN2 A B C D E F G H K L M N ØO

S pump range 66S3 508 E 500 600 1550 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 3510 E 500 600 1550 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 2210 L 500 500 1300 479 495 1830 1200 1270 550 800 1100 1180 700 300 27S3 3510 L 500 500 1300 479 495 1830 1200 1270 550 800 1100 1180 700 300 27S3 508 L 500 500 1300 479 495 1830 1200 1270 550 800 1100 1180 700 300 27S pump range 70S3 658 E 500 600 1600 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 1306 E 500 600 1600 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 658 L 500 500 1425 479 495 1830 1200 1270 550 800 1100 1180 700 300 28S3 1006 L 500 500 1425 479 495 1830 1200 1270 550 800 1100 1180 700 300 28S3 1306 L 500 500 1425 479 495 1830 1200 1270 550 800 1100 1180 700 300 28

Pump range/type

Dimensions [mm]DN1 DN2 A B C D E F G H K ØL M N O P Q R

S pump range 58S2 224 AL 250 200 1273 1015 - 925 550 670 380 267 - 18 500 - 115 375 390 450S2 264 AL 250 200 1273 1015 - 925 550 670 380 267 - 18 500 - 115 375 390 450S1 224 M 200 125 1262 815 - 775 400 536 235 280 - 18 500 - 115 375 390 450S1 264 M 200 125 1262 815 - 775 400 536 235 280 - 18 500 - 115 375 390 450S1 224 H 150 125 1223 815 - 795 420 450 237 250 - 18 500 - 115 375 390 450S1 264 H 150 125 1235 815 - 795 420 450 237 250 - 18 500 - 115 375 390 450S2 156 E 250 300 1285 - - 1200 650 830 - 330 - - 500 - 115 550 390 -S2 226 E 250 300 1285 - - 1200 650 830 - 330 - - 500 - 115 550 390 -S pump range 62S2 208 300 300 1550 820 - 1250 700 910 525 330 - 18 600 - 50 500 600 760S2 288 300 300 1550 820 - 1250 700 910 525 330 - 18 600 - 50 500 600 760S3 1512 400 300 1550 - - 1250 700 910 525 330 - 18 500 - - 550 600 660S2 304 E 250 300 1550 820 - 1250 800 840 485 330 - 18 500 - 100 550 390 450S2 404 E 250 300 1550 820 - 1250 800 840 485 330 - 18 500 - 100 550 390 450S2 504 E 250 300 1550 820 - 1250 800 840 485 330 - 18 500 - 100 550 390 450S2 304 AL 250 200 1465 820 - 1035 660 630 360 280 - 18 500 - 115 375 390 450S2 404 AL 250 200 1465 820 - 1035 660 630 360 280 - 18 500 - 115 375 390 450S2 504 AL 250 200 1465 820 - 1035 660 630 360 280 - 18 500 - 115 375 390 450S1 304 M 200 125 1440 820 - 815 440 510 260 265 - 20 500 - 115 375 390 450S1 404 M 200 125 1440 820 - 815 440 510 260 265 - 20 500 - 115 375 390 450S1 504 M 200 125 1440 820 - 815 440 510 260 265 - 20 500 - 115 375 390 450S1 304 H 200 150 1455 820 - 815 440 510 260 265 - 20 500 - 115 375 390 450S1 404 H 200 150 1455 820 - 815 440 510 260 265 - 20 500 - 115 375 390 450S1 504 H 200 150 1455 820 - 815 440 510 260 265 - 20 500 - 115 375 390 450S pump range 66S3 508 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850 800 700 760S3 3510 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850 800 700 760S3 2210 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600 700 700 760S3 3510 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600 700 700 760S3 508 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600 700 700 760S2 358 M 300 300 1540 1000 - 1250 700 880 525 217 450 24 450 450 417 550 700 760S2 554 BM 250 200 1500 1000 - 860 460 700 290 210 400 28 450 450 453 400 700 760

(Cont. next page).

20 Technical data >


Horizontal dry installation


Pump range/type

Dimensions [mm]DN1 DN2 A B C D E F G H K ØL M N O P Q R

S pump range 66S2 654 BM 250 200 1500 1000 - 860 460 700 290 210 400 28 450 450 453 400 700 760S3 508 M 300 300 1615 1000 - 1200 700 880 525 320 470 24 450 450 590 500 700 760S2 508 H 300 250 1600 1000 - 1250 750 870 480 290 470 24 450 450 554 500 700 760S2 654 AL 300 250 1550 1000 - 1300 750 730 410 227 470 28 450 450 559 550 700 760S1 654 AH 250 200 1525 1000 - 1000 600 595 305 225 400 24 450 450 463 400 700 760S pump range 70S3 658 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850 800 700 760S3 1306 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850 800 700 760S3 658 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600 700 700 760S3 1006 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600 700 700 760S3 1306 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600 700 700 760S3 658 M 300 300 1700 1000 - 1200 700 880 525 280 730 28 450 450 555 500 700 760S3 806 M 300 300 1700 1000 - 1200 700 880 525 280 730 28 450 450 555 500 700 760S3 1006 M 300 300 1700 1000 - 1200 700 880 525 280 730 28 450 450 555 500 700 760S3 1306 M 300 300 1700 1000 - 1200 700 880 525 280 730 28 450 450 555 500 700 760S2 854 AM 250 200 1630 1000 - 860 460 700 285 210 440 28 450 450 486 400 700 760S2 1154 M 250 200 1800 1000 - 950 550 710 360 240 440 28 450 450 506 400 700 760S2 1604 M 250 200 1800 1000 - 950 550 710 360 240 440 28 450 450 506 400 700 760S2 1604 L 300 250 1800 1000 320 1300 750 730 410 227 440 28 450 450 603 400 700 760S2 658 H 300 250 1550 1000 - 1250 750 870 480 288 440 28 450 450 577 500 700 706S2 806 H 300 250 1550 1000 - 1250 750 870 480 288 440 28 450 450 577 500 700 760S2 1006 H 300 250 1550 1000 - 1250 750 870 480 288 440 28 450 450 577 500 700 760S2 1306 H 300 250 1550 1000 - 1250 750 870 480 288 440 28 450 450 577 500 700 760S1 854 H 250 200 1585 1000 - 1000 600 595 305 225 400 24 450 450 463 400 700 760S2 1154 H 250 200 1600 1000 - 1000 600 595 305 200 440 28 450 450 438 400 700 760S2 1604 H 250 200 1600 1000 - 1000 600 595 305 200 440 28 450 450 438 400 700 760S2 1154 S 250 200 1800 1000 - 1150 750 710 360 230 - 28 450 450 - 400 700 760S2 1604 S 250 200 1800 1000 - 1150 750 710 360 230 - 28 450 450 - 400 700 760

21 Technical data >


Pos. Picture

Description Base plate discharge flangeProductnumber

Pumpdischarge

[mm]DN 150 DN 200 DN 250 DN 300 DN 350 DN 400 DN 500 DN 600

1Auto-couplingCast iron base plate incl. bend.

150 • 96066466

200 • 96066481

2

Auto-couplingSteel base plate excl. bend, incl. bolts and gaskets.*200 mm higher than product number 96066479.

150 • 96066467200 • 96066482250 • 96066493300 • 96066479300* • 96066478500 • 96465432600 • 96066503

3 Cast iron bend 90°PN 10.

DN100/150 96060931150/150 96060934150/200 96060935200/200 96060938200/300 96060940250/250 96060942250/300 96060943250/300 96060944300/300 96060946300/400 96060947400/500 96060950500/500 96060951600/600 96060952

4Guide rail bracketUpper holder in stainless steel for guide rails.

150 96457261200 96067996250 96067999300 96067999500 96068001600 96459313

5 Non-return valveCast iron ball-type, PN 10.

150 96003423200 96003839250 96004421300 96004422350 96116553400 96116554

6

Lifting chainGalvanized lifting chain with lifting link and safety hook, length 6 m.

Max. load 1100 kg 96468285Max. load 2000 kg 96468290Max. load 3200 kg 96468295Max. load 8000 kg 96468300

7Modular ControlsPlease see Modular Controls brochure

8

IO 111 moduleThe Grundfos IO111 module forms an interface between a Grundfos wastewater pump with analoque and digital-sensors and the pump controller.

IO111 96575362

9 Analogue Water-in-Oil sensorWIO Cable length 10 m 96294840WIO Cable length 25 m 96295122WIO Cable length 50 m 96294041

10

Alarm status monitoringThe ASM 3 alarm status module is designed for monitoring motor temperature and possible moisture leaks in submersible pump motors. The ASM 3 decodes the internal protection circuit P1-P2 of the pump in such a way that the thermal alarm and moisture alarm, normally connected in series, can be separated. The ASM 3 registers the status of the internal protection circuit of the pump. The pump must be prepared for ASM 3.

All ranges ASM 3 110 V 96060434

All ranges ASM 3 230 V 96069934

11 AMD.07.18.1410 mixer for flushing in pump sump. Contact Grundfos

Accessories

22 Accessories >

The Grundfos wastewater range

23 The range >

Modular Controls for wastewater pumping stationsBrochure covers the first fully integrated multi-pur-pose pump control system.

SE1 and SEV ranges 1.1 – 11 kWThis brochure describes the innovative SEV/SE1 pump lines. Fitted with Super-Vortex or single-channel impellers, these pumps can meet approximately 80% of all wastewater pumping needs.

DP, EF, SE1 and SEV ranges 0.6 – 2.6 kWBrochure covers the Grundfos range of sub-mersible channel-impeller and Super-Vortex-impeller pumps from 0.6 to 2.6 kW. Designed for handling drainage, effluent and sew-age from private dwellings.

SEG ranges 0.9 – 4.0 kWBrochure covers the Grundfos range of sewage grinder pumps (SEG) for pumping of wastewater with toilet discharge.

S pump ranges 34 – 42, 1.65 – 5.0 kWThe brochure covers the Grundfos range of heavy-duty submersible Super-Vortex and channel-impeller pumps from 1.65 to 5.0 kW. All suitable for unscreened sewage.

S pump ranges 50 – 58, 5.0 – 29 kWBrochure covers the Grundfos range of submers-ible channel-impeller pumps from 5 kW up to 21 kW and Super-Vortex pumps up to 29 kW. All designed for hand-ling unscreened raw sewage.Available in 50 Hz and 60 Hz versions.

S pump ranges 50 – 54 & 74 – 78, 55 – 520 kWBrochure covers the Grundfos range of super-heavy-duty channel pumps, axial flow pumps, and pro-peller pumps from 7.5 kW up to 520 kW.

S pump range 72,90 – 225 kWBrochure covers the Grundfos range of heavy-duty submersible pumps from 90 to 225 kW for pumping of large quanti-ties of wastewater and unscreened raw sewage.

SEN pump ranges 34 – 54 kW,1.65 – 21 kWBrochure covers the Grundfos range of heavy-duty stainless steel pumps (SEN) for aggressive and corrosive environments.

SRP ranges 3.0 – 24 kWBrochure covers the Grundfos range of SRP submersible recirculation pumps for wastewater treatment plants and flood control.Available in 50 Hz and 60 Hz versions.

AMD, AMG, and AFG rangesBrochure covers the new range of mixers and flow-makers for optimal control of liquids and solids through-out the wastewater treat-ment process.

Multlift M, MD, MDV, and MD1 rangesBrochure covers Grundfos lifting stations for indivi-dual as well as multi-user applications.

Prefabricated pumping stationsBrochure covers the Grundfos range of prefabri-cated pumping stations for collecting and removing drainwater, surface water, domestic and industrial wastewater and sewage.

Large prefabricated pumping stationsBrochure covers the Grundfos range of large, prefabricated pumping stations designed to meet many different customer needs.

LC/LCD ranges – level controllersBrochure covers the Grundfos range of controls for the waste-water pumping systems.

Being responsible is our foundationThinking ahead makes it possible

Innovation is the essence

www.grundfos.com

Business with an attitude

Knowledge The sharing of knowledge, experience

and expertise across our global network will always

lead our business forward.

Innovation Combining the best technology with

fresh ways of thinking, we will continue to develop

even better pumps, systems, services and standards.

Solution With a complete product range, capable

of providing every conceivable water solution, we are

the most complete player on the market.

96

4955

25 1

106

Documents

S pump ranges 54 – 70, - · PDF fileLarge, powerful pumps for handling unscreened raw sewage Grundfos offers a full range of extremely depend-able, powerful sewage pumps, designed