S225LC-V SPEC · rating amperes : 55 a 2.3) battery system voltage : 24 v quantity : 12 v x 2 capacity (amp) : 100 ah 2.4) air cleaner type : dry, double element filtration area :

MODEL SD200N 1/16 DOOSAN INFRACORE CO., LTD.

SD200N

CONTENTS PAGE

1. GENERAL SPECIFICATION ........................................................................ 2

2. ENGINE SYSTEM ....................................................................................... 3

3. HYDRAULIC SYSTEM ................................................................................ 5

4. DRIVE MECHANISM ................................................................................... 6

5. HYDRAULIC CYLINDERS ......................................................................... 10

6. FRONT ...................................................................................................... 11

7. DIMENSIONS AND WORKING RANGE .................................................... 12

8. PERFORMANCE DATA ............................................................................. 13

9. NOISE LEVEL ........................................................................................... 14

10. USER SERVICE DATA ............................................................................ 15

11. SUB GROUP WEIGHTS .......................................................................... 16

12. TIPPING LOAD ........................................................................................ 16


1. GENERAL SPECIFICATION

ITEMS UNIT STANDAR

D OPTION(1) OPTION(2) OPTION(3)

OPERATING WEIGHT ton 10.35 10.37 10.42 10.44

BUCKET CAPACITY ( SAE HEAPED) m3 1.7

1.7 2.2 2.2

ENGINE RATED POWER (Gross) ps(kw)/rpm 125(92)/2200

MAX. TORQUE (Gross) N.m/rpm 500/1400~1500

SYSTEM PRESSURE (WORK/STEER) kg/cm2

170/140

TRAVEL SPEED km/h 0~37

GRADEABILITY %( º) 58 (30)

TIRE SIZE 0

17.5-25-12PR

17.5-25-12PR 17.5-25-12PR 17.5-25-12PR

BREAKOUT FORCE ton

10.1 10.3 8.5 8.6

WORKING RANGE

DUMP HEIGHT AT 45°(w/ tooth) mm 2840 3100 2848 3118

DUMP REACH AT 45° (w/ tooth) mm 1240 1134 1270 1160

MAX. DUMP ANGLE (fully raised) deg 48º 48º 48º 48º

MAX. TILT ANGLE (on ground) deg 45º 45º 45º 45º

MAX. TILT ANGLE (fully raised) deg 60º 60º 60º 60º

MAX. TILT ANGLE (at carry) deg 50º 50º 50º 50º

BUCKET HINGE HEIGHT mm 3,770 4040 3770 4040

DIGGING DEPTH (0° level) mm 45 55 50 60

TRAVEL DIMENSION

OVERALL LENGTH mm 6,990 7150 7010 7170

OVERALL WIDTH mm 2496 2496 2506 2506

OVERALL HEIGHT mm 3,250 3250 3250 3250

GROUND CLEARANCE mm 330 330 330 330

WHEEL BASE mm 2,700 2,700 2,700 2,700

TREAD mm 1,850 1850 1850 1850

MAX. STEERING ANGLE deg 36º 36º 36º 36º

TURNING RADIUS(Tire center) (Bucket edge) mm 5,050 5,050 5050 5050

SOUND LEVEL in CAB (2000/14/EC) dB(A) 84 84 84 84

EXTERNAL SOUND POWER LEVEL(2000/14/EC) dB(A) 112 112 112 112

FUEL TANK CAPACITY Litre 155 155 155 155

OPTION ATTACHMENTS

STANDARD BUCKET (1.7 m

3)

SPADE NOSE BUCKET (2.2 m3)

OPTION SPOOL

Standard : Standard bucket, 17.5-25-12 PR Tire

OPTION(1) : 1.7 m3

Bucket, Long Arm，17.5-25-12 PR Tire

OPTION(2) : 2.2 m3

Bucket, Standard Arm，17.5-25-12 PR Tire

OPTION(3) : 2.2 m3

Bucket, Long Arm，17.5-25-12 PR Tire

OPTION ATTACHMENTS

* Buckets * 3-rd Spool *ALS

← ← ←


2. ENGINE SYSTEM

2.1) ENGINE

MAKER & MODEL : Wei chai WP6G125E22 (TIER-II Certified)

RATED HORSE POWER : 92 Kw/2200 rpm

MAX. TORQUE : 500 N.m/1400~1500 rpm

FUEL CONSUMPTION : 215 g/kw.h @ RATED SPEED

TYRE : TURBO,DIRECT INJECTION

DISPLACEMENT : 6234 cc

NO. OF CYLINDER : 6

BORE & STROKE : 105 X 130 (mm)

HIGH IDLE SPEED : 2376~2464 rpm

LOW IDLE SPEED : 800±50 rpm

STARTING MOTOR : 24V X 6 kw

2.2) ALTERNATOR

VOLTAGE : 28 V

RATING AMPERES : 55 A

2.3) BATTERY

SYSTEM VOLTAGE : 24 V

QUANTITY : 12 V x 2

CAPACITY (AMP) : 100 AH

2.4) AIR CLEANER

TYPE : DRY, DOUBLE ELEMENT

FILTRATION AREA : 5.4 m2 (MAIN), 0.9 m2 (STEER)

SIZE (DIA. X LENGTH) : Φ215 mm X 395 mm

2.5) MUFFLER

DESCRIPTION : SIDE INLET, VERTICAL TAIL PIPE

SIZE : φ200 mm X 440 mm

2.6) FAN ( Remote Driven by Fan Motor )

TYPE : BLOWING , 6 BLADE, STEEL

SIZE : Φ600 mm

RPM @ MAX ENGINE RPM : 1800 rpm

2.7) RADIATOR

TYPE (HEAT REJECTION AREA) : FLAT PLATE FIN, AIR COOL( =35.45 m2 )

HEAT REJECTION CAPACITY : 55 KW

2.8) TRANSMISSION OIL COOLER

TYPE (HEAT REJECTION AREA) : PLATE, AIR COOL ( =14.97 m2 )

HEAT REJECTION CAPACITY : 36.8 KW


2.9) HYDRAULIC OIL COOLER

TYPE (HEAT REJECTION AREA) : PLATE, AIR COOL ( =6.85 m2 )

HEAT REJECTION CAPACITY : 5.75 KW

2.10) ENGINE PERFORMANCE CURVE

CONDITION SPECIFICATION

ATMOSPHERIC PRESSURE 100 kPa (25℃)

WARMING UP SUFFICIENT

COOLING FAN INSTALLED

ALTERNATOR INSTALLED

AIR CLEANER INSTALLED

MUFFLER INSTALLED

PERFORMANCE CONDITION SAE J1349

POWER (MAX. RATED) 92 kw / 2200 rpm

MAX. TORQUE 500 N.m / 1400~1500 rpm

FUEL CONSUMPTION(MAX.RATED) 215 g/kw.h


3. HYDRAULIC SYSTEM

3.1) MAIN PUMP & STEERING PUMP

TYPE : FIXED GEAR

DISPLACEMENT : 100 cc/rev

MAX. FLOW RATE : 215 l/min

TANK PRESSURIZING DEVICE : SEMI PRESSURISED (AIR BREATHER)

3.2) PILOT PUMP

TYPE : FIXED GEAR


MAX.FLOW RATE : 19 l/min

3.3) CONTROL VALVE

TYPE : PILOT CONTROL WITH FLOAT SPOOL

NO. OF SPOOLS : 2 (3)

SPOOL ARRANGEMENT : BUCKET - LOADER ARM - AUX.

RELIEF VALVE PRESSURE : 165 kgf/cm2

OVERLOAD RELIEF VALVE PRESS : 185 kgf/cm2

3.4) REMOTE CONTROL VALVE

TYPE : PILOT OPERATED ONE LEVER

WITH MECHANICAL ARM-FLOAT

PRESSURE : 25 BAR

3.5) PILOT SUPPLY VALVE

PILOT RELIEF PRESSURE : 35 BAR

3.6) RESTRICTION VALVE

CRAKING PRESSURE : 30 kgf/cm2

3.7) AIR BREATHER

CRACKING PRESSURE : -0.05/0.35 (kgf/cm2)

3.8) ACCUMULATOR ; BRAKE

CHARGE PRESSURE : 7.84 kgf/cm2

VOLUME : 34 L

3.9) FILTERS

TYPE (RETURN) : PAPER ELEMENT

SIZE : 12 µ

TYPE (PILOT) : PAPER ELEMENT

SIZE : 10 µ


4. DRIVE MECHANISM

4.1) TRAVELLING SYSTEM

4.1.1) TRANSMISSION

TYPE : 4 SPEED, POWER-SHIFT,

COUNTERSHAFT,ENGINE

REMOTE MOUNTE WITH

PROPELLER SHAFT &

DAMPER

TORQUE CONVERTER STALL RATIO : 3.2

TORQUE CONVERTER SIZE : 315mm

CHARGING PUMP FLOW : 60 l/min at 2200 rpm

HYDRAULIC PUMP P.T.O RATIO : 1.111

POWER SHIFT CONTROL PRESSURE : 11~15 kgf/cm2

CONVERTER SAFETY RELIEF PRESSURE : 5 kgf/cm2

MAX. ROTATING SPEED : 2500 rpm

SHIFT CONTROL : MECHANICAL TYPE

OUTPUT FLANGE : FRONT DISC FLANGE

REAR DISC FLANGE

CONTROL CIRCUIT (NEXT PAGE)


4.1.2) PROPELLER SHAFT

SPECIFICATION

FRONT CENTER REAR

MAX. ALLOWABLE TORQUE 6000N.m 4000N.m 4000N.m

MIN. JOINT ANGLE 20° >22° 20°

MAX. PHASE MISALIGNMENT ±1.5° ±1.5° ±3.0°

MAX. SPEED 3500 rpm 3500 rpm 3500 rpm

COUPLING DIMENSION DISC DISC DISC


4.1.3) FRONT AXLE

TYPE : FULLY FLOATING

PLANETARY-TYPE HUB

DRIVE

FIXED MOUNTING

OVERALL REDUCTION RATIO : 20.26

AXLE LOAD (EMPTY CONDITION) : 5,500 kg

AXLE LOAD (BREAKOUT CONDITION) : 18,500 kg

WHEEL BOLT P.C.D : Φ 404 mm

BRAKE TYPE : DRY DISC

BRAKE TORQUE per WHEEL : 9660 N.m

DRIVE FLANGE : DISC MECHANICS

4.1.4) REAR AXLE

TYPE : FULLY FLOATING

PLANETARY-TYPE HUB

DRIVE

TRUNNION MOUNTING

OVERALL REDUCTION RATIO : 20.26

AXLE LOAD (EMPTY CONDITION) : 5,500 kg

AXLE LOAD (BREAKOUT CONDITION) : 18,500 kg

WHEEL BOLT P.C.D : Φ 404 mm

BRAKE TYPE : DRY DISC

BRAKE TORQUE per WHEEL : 9660 N.m

DRIVE FLANGE : DISC MECHANICS

4.1.5) TYRE & WHEEL

TYPE : TUBE,GENERAL

TYPE SPEC. : 17.5 -25-12 PR

RIM SPEC. : 14.0/1.5- 25

DISC OFFSET : 206 mm

4.1.6) TRAVELLING PERFORMANCE (REFER TO NEXT PAGE)

MAX. SPEED : 40.0 KPH

MAX. TRACTIVE EFFORT : 9.7 TON

GRADEABILITY : 30° (58%)



4.2) BRAKE SYSTEM

4.2.1) BRAKE PUMP

TYPE : PISTION AIR

DISPLACEMENT : 39.6 cm³

4.2.2) SERVICE BRAKE VALVE (SINGLE)

BRAKE PRESSURE AIR : 7.84 kgf/cm2

BRAKE PRESSURE OIL : 140 kgf/cm2 at air pressure 7.84kgf/cm2

PEDAL FORCE : 30 kg at 140 kgf/cm2

4.2.3) PARKING BRAKE

TYPE : MECHANICAL

LEVER-FLEXIBLE SHAFT TYPE

CALIPER DISC BRAKE

MAX. PARKING TORQUE : 92.5 kgf.m

4.2.4) SYSTEM & PRESSURE

SYSTEM : AIR PUSH HYDRAULIC, SINGLE LINE

SERVICE BRAKE PRESSURE AIR : 7.84 kgf/cm2

SERVICE BRAKE PRESSURE OIL : 140 kgf/cm2

PARKING BRAKE RELESE PRESSURE : 4.0 kgf/cm2

BRAKE DISTANCE : 6.5 m at 32kph

4.3) STEERING SYSTEM

4.3.1) STEERING UNIT

TYPE : Load Sensing


4.3.2) STEERING VALVE

TYPE : CONTAINS A SEQUENTIAL VALVE,

PRIORITY VALVE,

PRESSURE RELIEF VALVE

CONTROL PRESSURE : 7 kgf/cm2

LS RELIEF VALVE SETTING : 140 kgf/cm2

MAX OIL FLOW TO STEERING : 250 L/min

5. HYDRAULIC CYLINDERS

LIFT BUCKET STEER

QUANTITY 2 1 2

BORE 125 140 80

ROD DIA. 70 80 45

STROKE 710 540 393


6. FRONT

6.1) FRONT LINKAGE PIN SIZES

POINT DIA. (mm) LENGTH (mm)

A 75 248

B 65 248

C 70 220

D 70 210

E 85 316

F 65 230

G 65 230

H 65 210

I 65 159


7. DIMENSIONS AND WORKING RANGE

7.1) MAX. DUMP ANGLE AT FULL HEIGHT

MAX. ROLLBACK AT GROUND

7.2) DUMPING CLEARANCE & DUMPING REACH


7.3) DIMENSIONS & PERFORMANCE SPECIFICATIONS

8. PERFORMANCE DATA

8.1) PRESSURE SETS

WORKING (PORT RELIEF) : 165 ± 5 kg/cm2

STEERING RELIEF (LS PORT SIDE) : 140 ± 5 kg/cm2

PILOT CONTROL : 35 ± 2 kg/cm2

BRAKE ACCUMULATOR CHARGING : 7.84 ± 5 kg/cm2

SERVICE BRAKE : 140 ± 3 kg/cm2

PARKING BRAKE RELEASE : 4.0 ± 3 kg/cm2

T/M SELECTION PRESSURE : 16 + 2 kg/cm2


8.2) SPEED & FORCE

OPERATION UNIT SPEED-FORCE REMARKS

BOOM UP SEC 5.0 ± 0.4

DOWN SEC 3.6 ± 0.4

BUCKET CROWD SEC 1.3 ± 0.3

DUMP SEC 0.8 ± 0.3

STEERING LOCK TO LOCK SEC 5.0 ± 0.4

E/G RPM (NO LOAD)

HIGH RPM 2350 ± 50

LOW RPM 800 ± 50

E/G RPM (LOAD)

HYDRAULIC STALL RPM 2300 ± 50

CONVERTER STALL RPM 2280 ± 50

T/C + HYD. STALL RPM 1850 ± 50

COOLING FAN HIGH RPM 2600± 50

TRAVEL SPEED (1/2) LOW Km/h 8.5/13

BRAKING DISTANCE HIGH m 7.6 m at 32 kph

MAX. TRACTIVE EFFORT kg 9,800

BREAKOUT FORCE kg 10,100

PAYLOAD kg 3,000

STATIC TIPPING LOAD (straight)

kg 7,265

STATIC TIPPING LOAD (full turn)

kg 6,390

9. NOISE LEVEL

LWA SURFACE SOUND POWER LEVEL : 110 dB(A) (2000/14/EC)

LpA OPERATOR`S CABIN NOISE LEVEL : 82 dB(A) (ISO 6396)


10. USER SERVICE DATA

No. Items To Check Service

SD200N

Qty. Service Interval（h）

10 50 100 250 500 1000 2000

1 Front Joint Pin Grease 13 V

2 Articulation Pin Grease 2 V

3 Stabilizer pin Grease 2 V

4 Steer Cylinder Grease 4 V

5 Drive Shaft Grease 13 V

6 Fuel Tank Diesel 155L V

7 Engine Oil Engine Oil(SAE15W40) 14L V F ●

8 Engine Oil Filter Cartridge 1 F ●

9 Fuel Pre-Filter Cartridge 1 ●

10 Fuel Filter Cartridge 2 ●

11 Transmission Engine Oil 42L V F ●

12 Transmission Filter Element(Primary) 1 C

Element(fine) 1 F ●

13 Hydraulic Oil Tank Hydraulic Oil

ISO #46 123L V ●

14 Oil Tank

Return Filter Element 1 F ●

15 Oil Tank

Breather Filter Element 1 C

16 Pilot Filter Cartridge 1 F ●

17 Radiator Coolant 28L V ●

18 Front Axle Gear Oil 19L V F ●

19 Rear Axle Gear Oil 19L V F ●

20 Air Filter Element (Outer) 1 C ●

Element (Inner) 1 ●

21 Break Pump Brake Fluid 2.8L V ●

22 Fuel Cap Filter Element 1 C

23 Fuel Suction Filter Element 1 C

V: Maintenance and Fill Grease NLGI-3 or NLGI-2

C: Cleaning Engine Oil API: CF-4, SAE: 15W40

F: First Time Exchange Only Transmission Oil API: CD/CE/CF/SF/SG

SAE: 15W40

● : Replacement On Every Interval Gear Oil API: GL-5, SAE: 85W/90

NOTE: For additional service items see

list of “Maintenance Intervals” on page

4-9.

Hydraulic Oil ISO: VG46, HV46

Coolant 50% Water + 50% (HOCH₂)₂

Brake Fluid DOT 3


11. SUB GROUP WEIGHTS

ITEM UNIT FIGURE REMARKS

BODY

GROUP

COUNTERWEIGHT kg 1050

FRONT FRAME kg 854

REAR FRAME kg 882

OIL TANK kg 113

FUEL TANK kg 120

ENGINE kg 650

TRANSMISSION kg 340

AXLE – FRONT kg 720

AXLE – REAR kg 720

TIRE(17.5-25-12PR) kg 108

TIRE(17.5-25-12PR) kg 108

RIM kg 140

PROPEL SHAFTS (4ea) kg 60

RADIATOR kg 126

MAIN PUMP + STEER PUMP kg 36.2

CONTROL VALVE kg 62

COVER GROUP kg 214

AXLE PIVOT SUPPORT kg

FENDER & LADDER kg 132

CABIN ASS'Y kg 610

FRONT

GROUP

LOADER ARM ASS'Y kg 648

TILT LEVER ASS'Y kg 162

BUCKET ASS'Y (w/cutting edge) kg 740

LINK ASS'Y kg 40

CYLINDER (BOOM + BUCKET) kg 337

OPTION STEEL CAB ASS'Y kg -

BUCKET ASS'Y (w/teeth) kg -

12. TIPPING LOAD (kgf)

12.1) TIPPING LOAD WITH BUCKET (1.7 m3 )

-. 7,265 kg AT MAX. REACH, AT STRAIGHT FRAME.

-. 6,390 kg AT MAX. REACH, AT FULL TURNED FRAME.

Documents

S225LC-V SPEC · rating amperes : 55 a 2.3) battery system voltage : 24 v quantity : 12 v x 2 capacity (amp) : 100 ah 2.4) air cleaner type : dry, double element filtration area :