S235j2,s235j2g3,s235j2 steel,s235jr grade,s235jr steel
plate,s235jr steel grade,en10025-2 Adopt standard: EN10025-2 Sell
steel grade: S235JR, S235J0, S235J2, S275JR, S275J0, S275J2,
S355JR, S355J0, S355J2, S355K2, S450J0 steel plate. S235J2 steel
plate S235JR, S235J0 and S235j2 steel is a structural steel grade
which be used in riveted, bolted, or welded construction of bridges
and buildings. S symbol for structural steel 235 indication of the
min specified yield strength for thickness of under 16mm. JR symbol
20 temperature impact test. J0 symbol 0 temperature impact test J2
symbol -20 temperature impact test This is common carbon steel
plate in S235JR, S235J0 and S235J2 steel grade. Gangsteel had many
stock size in carbon steel plate, in ASTM A36, S235JR, S235J0,
S235J2, SS400, ST37-2 and so on. For more information of S235j2
steel, please refer them in following. The Chemical is max
composition of product analysis:
Grade C % Si % Mn % P % S % N % Cu %
S235j2 0.190 - 1.500 0.035 0.035 - 0.060
The mechanical properties steel plate
Grade Thickness(mm) Min Yield (Mpa) Tensile(MPa) Elongation(%)
Min Impact
Energy
S235j2
8mm-100mm 215Map-235Mpa 360-510Mpa 21-26% -20 27J
101mm-200mm 195Mpa 340-500Mpa 22% -20 27J
201mm-400mm 175Mpa 21% -20 27J
The min impact energy is longitudinal energy
The material properties of S235J2G3 have the following meaning:
S: Means that this is a structural steel. 355: Minimum yield
strength (min Re=355 N/mm sq.) J2: Min. Charpy test value= 27J at
-20 deg.C;
G3: Supply condition. Normalized or normalized rolled
Material:S235J2G4 steel plate/pipes Standard: EN10025 Carbon
structural and high strength low alloy steel steel
S235J2G4steel plate/pipes Introduction and application: The
delivery condition of S235J2G4 steel plate are:Normalizing,
annealing,tempering,TMCP,PWHT, impact test,Q&T.
S235J2G4 steel plate/pipes total alloy content usually is not
more then 3% .Except for Si and Mn, there is V,Ti,Nb,Al,Cr,Ni,Re,N
and so on.
S235J2G4 steel plate/pipes has very wide use. Because of the low
carbon content and without alloy element, carbon structural steel
has the proper tensile strength, good toughness,
plasticity,processing property. S235J2G4 steel plate/pipe usually
be rolled into steel plates, shaped steel and profile steel, which
usually used to build workshop,bridge,vessels and so on
S235J2G4 steel plate, EN10025 S235J2G4 steel plate, under
EN10025 standard, we can regard S235J2G4 steel plate as Carbon and
low alloy steel S235J2G4 steel plate is one mainly of Carbon and
low alloy steel,S235J2G4 steel plate would be used to built
containers which can bear low temperature sea water. When customers
order S235J2G4 steel plate from us,our mill should be roll them
completely according to EN10025_2 specification, the mill would
issue original Mill test certificates before taking delivery for
checking.
S235J2G4 DIN EN 10025-2Number: 1.0117
Comparison of steel grades EN10025:1990 FE 360 D2
DIN17100 - NFA 35-501 -
BS1449 - UNI7070 -
S235J2G4 steel plate Chemical analysis -% by mass*
S235J2G4 steel sheet Mechanical properties
thickness Yield
StrengthReH[N/mm2]
TensileStrengthRm[N/mm2]transv.
Fracture Elongation[
Notch Impact Energy1)Ch Vcomplete
Chemical elements C 16mm
max C>16mm
max Si
max Mn max
P max.
S max.
%,by mass 0.17 0.17 -- 1.40 0.035 0.035
