Grout injection andbackfilling

Fireproofing Filling joints Stucco work

MS 1733-10 US Right to make technical amendments reserved. © Putzmeister, Inc. 2005 Printed in the USA(3.50509)MS 1733-10 US

IDEAL FOR...

nnnn Fireproofing

nnnn Plaster / Stucco

nnnn Injection Work

nnnn Pipe and Manhole Relining

nnnn EIFS

nnnn Mortar and Grouts

nnnn Pressure Grouting

nnnn Floor Leveling Compounds

nnnn Concrete Repairs

nnnn Specialty Materials

S5 SeriesVersatile Rotor / Stator Pumps and Mixers

Max theo output yd3/hr 3.7 yd3/hr 3.4 yd3/hr Mixer capacity 5.3 yd3/hrft3/min 1.7 ft3/min 1.6 ft3/min 5.5 ft3 (156L) 2.4 ft3/minlpm 48 lpm 44 lpm — 67 lpmbags/hr 23 bags/hr 21 bags/hr — 33 bags/hr

Max theo pressure 360 psi 360 psi — —(25 bar) (25 bar) — —

Max pumping distance horizontal 260’ (80m) 260’ (80m) — —vertical 195’ (60m) 195’ (60m) — —

Hopper height 30” (762mm) 31” (787mm) 54.5” (1384mm) 52” (1320mm)

Outlet diameter 2” (50mm) 2” (50mm) — —

Pump size 2L88 (Super 2L6) 2L6 — —

Volume control Variable 4-Speed — —

Directional control Reversing Fixed Reversing Fixed

Power 208/230V 7.5 hp Elec 60Hz 18 hp Gas 3 hp Elec 60Hz 5 hp Elec 60Hz

Continuous full load 24 amps 3ø — 10 amps 3ø 17 amps 3ø

amp draw @ 208V 42 amps 1ø — 18 amps 1ø 30 amps 1ø

Air compressor 10 cfm 2 hp motor 10 ft3/min — —208/230V 60Hz — — —

Continuous full load 7 amps 3ø — — —amp draw @208V 12 amps 1ø — — —

Dimensions 96.5” x 27.5”x 31” 99” x 27” x 36” 46” x 28” x 32” 92” x 22” x 23”(L x W x H) (2450x700x788mm) (2515x686x914mm) (1168x711x813mm) (2337x559x584mm)

On stand — — — 92” x 30” x 48”— — — (2337x762x1219mm)

Approx weight 800 lbs (363kg) 800 lbs (363kg) 550 lbs (250kg) 350 lbs (160kg)on stand — — — 425 lbs (193kg)

SPECS S5 EV (electric) S5 G (gas) TM 100 CM 928 More Featuresas Standard

nn Fully adjustablerotor / stator pump

nn “VFD” technology foreasy single to threephase conversion*

nn Variable volume control at nozzle with125 ft (38m) cable*

nn Electric control box designed to ULStandards using aNEMA 4 (weatherproof)enclosure

nn Main disconnectswitch*

nn10 cfm compressorwith on/off control

nn Material pressuregauge at outlet

nn Variable speed motorwith gear drive*

nn Compact and narrowto pass through standard30” (762mm) doorwaysand fit on elevators

* Electric versions only

12 13 14 15

1

S5 G - Gasoline Versionwith CM 928 mixer

1a

S5 EV - Electric Version

with TM 100 Mixer

PPuuttzzmmeeiisstteerr AAmmeerriiccaa1733 90th StreetSturtevant, WI 53177 USA

Telephone (262) 886-3200(800) 884-7210

Facsimile (262) 884-6338www.putzmeister.com

S5 EV Control Box Features n Designed to UL standards n Remote control outlet with 125 ft (38m) cable n On/off control switch from nozzlewith the ability to override the nozzle control n Switch for left or right rotation rotor/stator pumps to relieve line pressure if blockages occur n On/offswitch for compressor shut off when not in use

Primarily for outside plaster and stucco, this 18 hp gas version is alsopopular for pressure grout, vermiculite,swimming pool finish and pipe linerefurbishment. Four pump speedsallow precise control while a standardelectric start provides added operatorconvenience.

Ideal for plaster, stucco, grouts and fireproofing materials, this highly versatile mixer features a paddle typemixing blade with rubber wipers andreversing feature for efficient mixing.Plus, it easily bolts on to the S5 EV forquick, convenient use.

Ideal for fireproofers, this continuousmixer is also suited for mixes suppliedin bags, containers or silos. Ready ondemand, it maintains a steady consis-tent supply of material. A low waterpressure cut off, pressure regulatorand hopper cover are standard with aspecial bolt-on stand as optional.

928 Continuous Mixer

TM 100 Mixer

S5G - Gas Version

S5EV - Electric Version

Variable Speed Motor, No Belt BoxA variable speed motor with gear drive runs efficiently at any speed from 360 to 3,600 rpm.When the unit stops, the motor restarts at lowspeed and ramps back up to the last speedsetting used. Thanks to VFD, this design botheliminates the belt box and reduces motor damage.

1

5

34

2

Five Reasons Why Our “Adjustable” Rotor/Stator Pumps Work Better, Last Longer

A Putzmeister first — our innovative “adjustable” rotor/stator pumpdesign. Our adjustable stators with specially slotted tubes can be

tightened to the rotor. Presetat the factory to only 75% oftheir maximum pressure,several adjustments can bemade as the rubber wears.This results in three to fourtimes more life compared to nonadjustable pumpsthat start out at maximumpressure and lose volumeand pressure immediately.

Putzmeister’s special “adjustable” rotor/ stator pumps provide 3 to 4 times

more life than conventional ones.

Unlike most “threaded” tubes, the S5 uses a spacer plate and tie rodsystem for quick and easy removal. This allows different size statortubes to be used on the same machine.

Our clamping jacket and tube are two separate components so theclamping jacket can be reused again and again.

The S5 rotor and agitator are connected by a convenient bolt andnut assembly for easier access and disassembly.

Made only from the highest quality, Putzmeister stators are availablein a variety of shore hardnesses and rubber compounds, including

solvent resistant stator tubes. This allowspumping or spraying the widest range ofmaterials possible.

A - Gearbox B - Backup RingsC - AgitatorD - Cardan JointE - Adjustable StatorF - RotorG - Clamping JacketH - 2” CamlockI - Mortar Hopper

The SmoothestNozzle OutputA convenient speedcontrol at the nozzlelets operators adjustthe material outputelectronically any timeduring pump opera-tion. This eliminatesmanually operating ahand wheel at thepump.

A Technology “Breakthrough”

For maximum efficiency, VFD is a“must” for job sites that only have

single phase electrical outlets.

VFD

The number one choice of asbestosabatement respray applicators in NorthAmerica, our electric S5 now offerseven more features — special VFDtechnology, variable speed motor withgear drive, variable speed remote control, reversing feature and more.

2

3

4

5

6

7

8

11

10

9

A first and only to the rotor/statorindustry isPutzmeister’s useof VFD - VariableFrequency Drive -mounted on the unitnext to the control box.VFD easily converts singlephase electric power intomore efficient and reliablethree phase power to achievemaximum machine outputs and the highest productivity. To prevent motor damage, a low voltage sensor system automatically shuts downthe unit if there’s not enough voltage to the pump.

OOur compact

yet powerful S5 pumps

and mixers tackle a

variety of materials with

ease. And now, the S5

offers even longer life

and the very highest

productivity levels in

the industry. This is a

result of our specially

engineered VFD

technology, “adjustable”

rotor/stator pumps

and many other

improved features.

Rely on these highly

versatile and reputable

Putzmeister units to

outperform and outlast

all the rest.

New Technology, Better Features,

Higher Productivity