Upload
owen-sullivan
View
225
Download
0
Tags:
Embed Size (px)
Citation preview
S800H Hybrid Operator
Summary
S700H bug fixing
New S800H
Lever manual release
Hydraulic manual release
BUG FIXING
REPORT: Encoder disc – broken teeth
SOLUTION: New encoder disc
REPORT: Water seepage inside the encoder housing
SOLUTION: New Encoder RESIN protected
BUG FIXING
SOLUTION: POSITIVE STOP has been modified
REPORT: POSITIVE STOP fall out of their seat
BUG FIXING
REPORT: Pin fall out from fixing gracket and screews get lose
SOLUTION: Fixing bracket is modified, blind holes
BUG FIXING
REPORT: motor fixing bracket brackes
SOLUTION: Motor with integrated flange
BUG FIXING
REPORT: Oil leakage by the feeding pipe
SOLUTION: New, longer, pipe
BUG FIXING
SOLUTION: New Hydraulic Release
SEGNALAZIONE: little set-up margin if the box is not properly in position
BUG FIXING
Summary
S700H bug fixing
New S800H
Lever manual release
Hydraulic manual release
NEW S800HThe new S800H integrates all modifications applied in time to the
previous S700H
It can be easily recognised by the handles and electric motor cover in red colour
Summary
S700H bug fixing
New S800H
Lever manual release
Hydraulic manual release
SELLING POINTS
1 Ease of installation
2 Ease of use
3 Retro-fit
HYDRAULIC MANUAL RELEASE
1 Ease of installation
The release is directly fixed to the foundation box and connected to theoperator through two flexible pipes.
The release is COMPLETELY independent from the leaf and thereforephase between splined coupling and operator
2 Ease of use
The release (body totally aluminium made) is physically out of thefoundation box, this makes it possible to operate it from inside or outsideof the property.
The key release (metal key as standard) is protected by a rubber cover
3 Retro-fit
The height dimensions of the New Hydraulic Release and of the NewSplined Collar allow the installation (as replacement) on sites in whichis actually present the Lever Manual Release.
It’s sufficient to use the drilling template provided into the packaging, drill the holes on the foundation box, remove lever release and fix the New Hydraulic Release.
At present, all foundation boxes in our stocks already have the fixing holes.
4 Dimensions
The installation of CBAC operators commonly requires a manual release device.Lever release or Hydraulic Release have the height from the floor level.
LEVER RELEASE HYDRAULIC RELEASE
4 Dimensions
The installation of SB operators commonly requires only the splined collar.Two splined collars are available:-short: to have the leaf closer to the floor level-High: to have more space between leaf and floor level (this is the same collar needed to install the New Hydraulic Release).
SHORT HIGH
Summary
S700H bug fixing
New S800H
Lever manual release
Hydraulic manual release
Part Numbers and release devices configuration
1 Part Numbers and configurationsManual Release device for S800H CBAC operators:
lever manual release (P/N 390878)
or
Hydraulic release NEW (P/N 390035) +
splined collar NEW (cod.390972)
The SB operators do not require any release device, but only a splined collar to withstand the leaf:
short splined collar (P/N 390887)
or
High splined collar NEW (P/N 390972)
Product Availability
June 2011
(waiting BETA –TEST feed-backs)