2
© SAACKE GmbH 2011 www.rothfeld-waterkamp.de combuson & energy systems The small control unit with the big performance For further informaon, please visit: www.saacke.com The new SAACKE automac firing sequence controller eco is small and parcularly reasonably priced – but even in the basic configuraon it sll offers complete flexibility for demanding firing plants and considerable expansion possibilies. ecois suitable for every SAACKE burner with mechani- cal compound regulaon and the use of up to two fuels. As it is based on preconfigured components, it is not just operaonally reliable, but also ready for use immediately. The failsafe FSC basic unit forms the core of the ec  . It is compact, light, and can be posioned in the firing system in almost any posion. This is where all the pieces come together: the FSC analyses the signals from the safety interlock circuit and the flame detecon system, controls the purging, iniates the ignion, and monitors the running burner in the controlled operaon of the firing. Communicaon with other system components is also parcularly flexible thanks to Profibus and numerous other protocols, which means that eco can be remote controlled perfectly. The basic device is parameterized ready for connecon and installa- on, and ready for use in a flash. Time-consuming commissioning with tedious parameterizing and programming is a thing of the past. If necessary, the control unit can also be expanded – with just a few adjustments the eco automac firing sequence cont- roller can be transformed into a convenient burner management system with electronic compound regulaon ( compact) or a comprehensive burner management system with large touch screen ( ec). The eco is uncompromising when it comes to safety: as all se@vis control units, it goes without saying that it complies with the Pressure Equipment Direcve and the Gas Appliances Direc- ve, and offers cerfied safety in SIL 3 according to IEC 61508. In other words, if it is a queson of controlling individual burners safely and cost-effecvely, this lile automac firing sequence controller also has no problem with larger tasks. combuson & energy systems © SAACKE GmbH 2011 SAACKE GmbH, Head Office in Bremen: Südweststraße 13, 28237 Bremen, Germany, Tel.: +49 421 6495 0, Fax: +49 421 6495 5224 Internaonal contact details: : www.saacke.com, E-Mail: [email protected] 0-0750-0032b-02 Suitable for all SAACKE burners Preconfigured and immediately ready for use For individual burners with mechanical compound regulaon Separate safety interlock circuit for oil, gas, and general safety elements Automac valve proving system for gas shut off valves Oponal: purge suppression Automac firing sequence controller in accordance with DIN EN 298 and DIN EN 230 Complies with Pressure Equipment Direcve 97/23/EC and Gas Appliances Direcve 2009/142/EC Cerfied safety in SIL 3 and IEC 61508 Burner Management System

SAACKE - The small control unit with the big performance...se@vis control units, it goes without saying that it complies with the Pressure Equipment Directive and the Gas Appliances

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: SAACKE - The small control unit with the big performance...se@vis control units, it goes without saying that it complies with the Pressure Equipment Directive and the Gas Appliances

© SAACKE GmbH 2011

ww

w.ro

thfe

ld-w

ater

kam

p.de

combus�on & energy systems

The small control unit with the big performance

For further information, please visit:www.saacke.com

The new SAACKE automatic firing sequence controller eco is small and particularly reasonably priced – but even in the basic configuration it still offers complete flexibility for demanding firing plants and considerable expansion possibilities.

ecois suitable for every SAACKE burner with mechani-cal compound regulation and the use of up to two fuels. As it is based on preconfigured components, it is not just operationally reliable, but also ready for use immediately.

The failsafe FSC basic unit forms the core of the ec  . It is compact, light, and can be positioned in the firing system in almost any position. This is where all the pieces come together: the FSC analyses the signals from the safety interlock circuit and the flame detection system, controls the purging, initiates the ignition, and monitors the running burner in the controlled operation of the firing.

Communication with other system components is also particularly flexible thanks to Profibus and numerous other protocols, which means that eco can be remote controlled perfectly. The basic device is parameterized ready for connection and installati-on, and ready for use in a flash. Time-consuming commissioning with tedious parameterizing and programming is a thing of the past.

If necessary, the control unit can also be expanded – with just a few adjustments the eco automatic firing sequence cont-

roller can be transformed into a convenient burner management system with electronic compound regulation (  compact) or a comprehensive burner management system with large touch screen ( ec).

The eco is uncompromising when it comes to safety: as all se@vis control units, it goes without saying that it complies with the Pressure Equipment Directive and the Gas Appliances Direc-tive, and offers certified safety in SIL 3 according to IEC 61508. In other words, if it is a question of controlling individual burners safely and cost-effectively, this little automatic firing sequence controller also has no problem with larger tasks.

combus�on & energy systems

© SAACKE GmbH 2011SAACKE GmbH, Head Office in Bremen: Südweststraße 13, 28237 Bremen, Germany, Tel.: +49 421 6495 0, Fax: +49 421 6495 5224International contact details: : www.saacke.com, E-Mail: [email protected]

0-0750-0032b-02

• Suitable for all SAACKE burners• Preconfigured and immediately ready for use• For individual burners with mechanical compound regulation• Separate safety interlock circuit for oil, gas, and general

safety elements• Automatic valve proving system for gas shut off valves• Optional: purge suppression• Automatic firing sequence controller in accordance with

DIN EN 298 and DIN EN 230• Complies with Pressure Equipment Directive 97/23/EC and

Gas Appliances Directive 2009/142/EC• Certified safety in SIL 3 and IEC 61508

Burner Management System

Page 2: SAACKE - The small control unit with the big performance...se@vis control units, it goes without saying that it complies with the Pressure Equipment Directive and the Gas Appliances

Certificates / Test regulations:

• EC Gas Appliances Directive (2009/142/EC)• EC Pressure Equipment Directive (97/23/EC)• SIL 3 according to IEC 61508

• DIN EN 230• DIN EN 298• DIN EN 1643

• DIN EN 267 • DIN EN 676• TRD 411

• TRD 412• DIN EN 12952-8• DIN EN 12953-7

• DIN EN 746-2• DIN EN 50156-1

SAACKE GmbH Head Office in Bremen: Südweststraße 13, 28237 Bremen, Germany, Tel.: +49 421 6495 0, Fax: +49 421 6495 5224International contact details: : www.saacke.com, E-Mail: [email protected]

0-0750-0032b-02

combus�on & energy systems

Feature AK-0

0

AK-0

1

AL-0

0

BA-0

0

BA-0

1

EC-0

0

EC-0

1

CA-0

0

CA-0

1

FC-0

0

FC-0

1Gas burner • • • • • • •Oil burner: Rotary cup atomizer • • • •Oil burner: Pressure atomizer • • • •Purge suppression input • • • • • • • • • •Separate ignition flame monitoring input • • • •Second flame monitor • • •Integrated valve proving system for main gas valves • • • • • • •Pressure relief via hand valve • • •Pressure relief via main gas valve 2 • • • •WTE data exchange interface • • •Direct ignition for oil firing operation mode • • • •Optional Profibus coupling • • • • • • • • • • •Remote control possible via Profibus • • • • • • • • • • •

Variant