SAFETY KNIVES AND SCISSORS ›› You can view the 2016/2017binisas.com/wp-content/uploads/2017/01/MARTOR-sito-2016_2017.pdf · martor is the leading international partner for innovative

MARTOR IS THE LEADING INTERNATIONAL PARTNER FOR INNOVATIVE CUTTING SOLU-TIONS, ESPECIALLY IN THE AREA OF SAFE-TY KNIVES. THIS CATALOGUE INTRODUCES OUR HIGH QUALITY PRODUCT RANGE. OUR CONSTANT EFFORTS TO OFFER A RANGE OF PRODUCTS TAILORED TO THE NEEDS OF OUR CUSTOMERS IS ALSO REFLECTED IN A NEW CLASSIFICATION SYSTEM ON THE PRODUCT PAGES. THIS MEANS THAT YOU DO NOT ONLY FIND OUT EVERYTHING YOU COULD POSSIBLY WANT TO KNOW ABOUT EACH INDIVIDUAL CUTTING TOOL, YOU AL-SO RECEIVE ALL DATA AND FACTS THAT YOU NEED FOR TARGETED ORDERING.

WELCOME TO MARTOR

›› You can view the

extensive table

of contents here.

Please flip open!

SAFETY KNIVES AND SCISSORS2016/2017

The products in this catalogue are generally shown in original size. The few exceptions are indicated on the product page.

COMPLETE TABLE OF CONTENTS

INTRODUCTIONMade in SolingenActive accident prevention

OUR SAFETY KNIVES AND SCISSORSOur latest productsSECUMAXSECUPROSECUNORMSOS CutterMDP CutterAccessories

APPENDIXCutting material matrixBlade matrixOur websiteOur additional service mediaYour wishesThe most common cutting typesOur special termsImprint

FOLD OUTPictogram legend

Page24

15175777

115121133

145148153154156158160164

Page182022242630323638394041424445464849505254

Page586062646670717274

Page7880828486889698

100102104106108110112

CONCEALED BLADESECUMAX 350SECUMAX 150SECUMAX 145SECUMAX EASYSAFESECUMAX COMBISECUMAX NOVEXSECUMAX OPTICUTSECUMAX SNITTYSECUMAX MOBILEXSECUMAX COUPPYSECUMAX ZEPHERSECUMAX SHEETING CUTTERSECUMAX POLYCUTSECUMAX PLASTICUTSECUMAX POLYPICKSECUMAX CARDYCUTSECUMAX TRENNEXSECUMAX VISICUTSECUMAX 565SECUMAX 564SECUMAX 363

FULLY AUTOMATIC BLADE RETRACTIONSECUPRO 625SECUPRO MARTEGOSECUPRO MERAKSECUPRO MEGASAFESECUPRO MAXISAFESECUPRO OPTISAFESECUPRO LEWISSECUPRO PROSAFESECUPRO CUT-O-MATIC

AUTOMATIC BLADE RETRACTIONSECUNORM 380SECUNORM PROFI40SECUNORM PROFI25SECUNORM MULTISETSECUNORM PROFI LIGHTSECUNORM PROFISECUNORM MIZARSECUNORM 175SECUNORM HANDYSECUNORM SMARTCUTSECUNORM GENIALSECUNORM MULTISAFESECUNORM REGELSAFESECUNORM POWERCUTSECUNORM 590

FULLY AUTOMATIC BLADE RETRACTION→ very high degree of safety

AUTOMATIC BLADE RETRACTION→ high degree of safety

CONCEALED BLADE→ maximum safety

WELCOME TO THE WORLD OF SAFE CUTTING.

32

MADE IN SOLINGEN.MADE FOR YOU.

From Solingen into the world. Our partners are based in Argentina, Australia, Belgium, Czech Republic, France, Great Britain, Hungary, Israel, Mexico, Poland, Spain, Turkey, the Netherlands, USA.

TÜV Rheinland confirms:MARTOR in Germany has a certified quality management system.

Awards for our products:Our quest for quality and sophisticated design has been honoured. But your satisfaction is an even greater accolade.

WWW.MARTOR.COM

Worldwide, the term ”Solingen” stands for quality and reliability. This applies to knives and

blades. ”Made in Solingen“ has been a recognised seal of quality for centuries. Just as it

distinguishes the history of the MARTOR brand, we have been successful in being a part

of Solingen‘s reputation. Today, we distribute products to more than 70 countries. We are

represented by partner companies in 40 countries. They not only supply their MARTOR

customers and advise them in detail. They also provide us with ideas from all over the

world, which we regularly integrate in our product innovations.

54

70%

Cutting without risks? That‘s somehow a contradiction. We have been motivated in the past years and decades to resolve this contradiction. In 1976 we brought the first TÜV-certified safety knife in the world to the market, our PROFI. Our aim was to continu-ously improve what was already good. Fully automatic blade retraction followed automatic blade retraction. MARTOR was a pioneer here too. Our product range is now topped off with innumerable cutting tools with concealed blades, the highest safety level.

We have set standards with our GS-certified safety knives that are essential for protection at work. Numerous patents prove our strength to innovate. For us, safe is just not safe enough. Based on our three safety technolo-gies and according to your needs, we aim to develop the ”ideal cutting solution”. This also includes, amongst other features, to make the blade change as easy and safe as possible.

We increasingly focus on “user friendliness“. The ambassadors are our new products – for even better ergonomics and a new modern design.

OUR SAFETY KNIVES= ACTIVE ACCIDENT PREVENTION.

MORE SAFETY AT THE WORK PLACE.OUR THREE SAFETY TECHNOLOGIES.

For example: We were able to help a major international furniture chain to reduce the number of cut injuries by about 70% in just two years.

500You protect your staff with MARTOR - and your expenditure budget. Because every lost work day you avoid saves you up to 500 euros.

Concealed bladeThe blade is not open, rather concealed, shielded from both people and goods alike. Giving you a maximum degree of safety from cut injuries whilst cleverly protecting your goods.

Fully automatic blade retractionThe intelligent cutting tool: as soon as the blade leaves the cutting material, it with-draws automatically into the handle - without your having to do anything. That‘s what we call “a very high degree of safety“..

Automatic blade retractionThumbs up for a high degree of safety. As soon as you start cutting, remove your thumb from the slider. The blade will disappear into the handle the moment it loses contact with the material being cut.

Safety technologies

76

TO CUT ROBUST MATERIALS, YOU NEED A PERFECTLY BALANCED TOOL. ONE THAT LIES FIRMLY IN YOUR HAND AND ENSURES YOUR SAFETY WHILE YOU CAN FOCUS ON THE JOB. SUCH A TOOL IS THE NEW SECUPRO 625.

98

ENDLESS BLADE, ENDLESS DANGER? NOT WITH MARTOR. WE COMBINE EVEN GREATEST CUTTING DEPTHS WITH OUR RELIABLE SAFETY TECHNOLOGIES. FOR EXAMPLE: THE SECU- NORM 380 HAS A BLADE EXTENSION OF ALMOST 8 CM.

1110

MARTOR SHOWS WHAT‘S POSSIBLE WITH 12 GRAMS.THE NEW SECUMAX 145 HAS THE ROBUSTNESS TO COPE WITH TOUGH ROUTINE TASKS. USABLE FOR A DIVERSE RANGE OF REQUIREMENTS. AND SECURE – ESPECIALLY FOR YOUR PERSONAL SAFETY.

1312

SAFE CUTTING IS AN ESSENTIAL PART OF THE MARTOR DNA. IN ORDER TO OFFER YOU THE BEST POSSIBLE SELECTION OF PRODUCTS, WE EXTEND OUR RANGE WHEREVER IT MAKES SENSE. FOR EXAMPLE, IN THE FORM OF OUR THREE NEW SAFETY SCISSORS.

1514

OUR PRODUCT RANGE IS LIKE A BIG FAMILY FOR US. IT IS ALWAYS DIF-FICULT TO PRAISE ONE PRODUCT. AN EXCEPTION: OUR INNOVATIONS. PLEASE PAY A BIT MORE ATTENTION TO THEM.

OUR LATEST PRODUCTS

SECUMAX 564

Our safety scissors with extra-long cutting

edge and comfortable support surface.

More information on page 52.

SECUMAX 363

Small, swift, precise - and, thanks to the spe-

cial grinding, as safe as our other scissors.

See page 54 onwards.

SECUMAX 565

A multi-talented safety scissors. For powerful

cuts and much more. To learn more see page

50 onwards.

SECUMAX 145

Just 12 grams but with plenty of positive

features. Also available in an metal detec-

table version. From page 22 and page 122.

SECUNORM 380

The world‘s first safety knife with approx.

8 cm blade extension and automatic blade

retraction. See page 78 onwards.

SECUPRO 625

Our high-quality squeeze-grip cutter made

of aluminium. With ergonomic handle and

deep cutting depth. See page 58 onwards.

Concealed blade

The blade is not open, rather concealed,

shielded from both people and goods alike.

Giving you a maximum degree of safety

from cut injuries whilst cleverly protecting

your goods.

SECU

MA

X

45°

18 19

SECUMAX 350NO. 350001.02

2-in-1 blade headDouble function, doubly useful: with two cutting edges and two tape split-ters, this multifunctional blade head exceeds itself. Before you need to change the blade, flip it over once to use the second side.

Concealed bladeThe SECUMAX 350 is a smart cutter. It‘s fitted with an double-sided over-moulded blade, the noses have the perfect length to protect. The two cutting edges are wide enough to safely and effortlessly cut 2-ply cardboard.

Spare blade in storageBlade change is easily and safely executed. Look for the arrow and follow its lead. Open the blue inner side of the cutter to re-veal the spare blade. The mounted blade will simul-taneously unlatch.

Light and easyA cutting heavyweight, but with only 37 grams, this cutter is rather light-weight... Meaning that even high cutting fre-quencies won‘t weigh you down. There‘s no need to stress when handling the blade either: a plastic jack-et protects your fingers.

Ergonomically shapedRight handed or left handed? It’s really all the same. The SECUMAX 350 fits perfectly in any hand. Gently arching outer edg-es, coupled with suitably located soft-grip and light ribbing make for an ergo-nomic experience.

More fun while you work? Try it out.The new SECUMAX 350 is a combination of versatility, com-fort and safety. A maximum degree of safety. Featuring an innovative blade change, this cutter is multi-talented. It can be used to cut all standard materials, from film to plastic- strapping, from paper to 2-ply cardboard. It splits adhesive tape easily too. And it is so comfortable to hold that you won‘t want to put it down.

Application

PRODUCT FEATURES NO. 350001.02

Technical features

Main cutting materials

BELT HOLSTER S WITH CLIP NO. 9920.08

USED BLADE CONTAINER NO. 9810.08

WALL MOUNT BRACKET USED BLADE CONTAINER

NO. 9845.06

ACCESSORIES

PRODUCT DETAILS

Knife size (L x W x H) 154 x 12 x 40 mm

Main material Glass fibre rein-forced plastic

Weight 37.0 g

Weight per unit (single unit box) 50.0 g

›› Further information from page 132 onwards.

SECUMAX 350 1 in single unit box (10 in multipack) NO. 350001.02

Installed blade: SECUMAX BLADE 0.30 mm, 10 in box NO. 3550.20

ALL VARIANTS

45°

20 21

SECUMAX 150NO. 150001.08

3-in-1 blade headThe SECUMAX 150 fits like a glove. It‘s so comfortable to hold, that it feels like an ex-tension of your hand. With it you can cut cardboard, split tape, open plastic strapping… you can even scrape residue off surfaces.

Concealed bladeThis safety knife doesn‘t need a sharp tip to be a smart cutter. The cutting head is flat and relatively small, the two noses on either side are the perfect length to protect, and both cutting edges are wide enough to safely and effort-lessly cut 2-ply cardboard.

Clever guide surfacesAnother reason why the SECUMAX 150 can cut through cardboard so easily? The guide surfaces located right at the front of the cutter help you to cut on an angle. Angled cutting means less material resistance!

No blade changeThe SECUMAX 150 is a disposable cutter. The blade can neither get lost nor injure you during blade change. You won‘t change the blade! When the time has come, simply drop the cutter into a sharps con-tainer.

Ergonomically shapedRight handed? Left hand-ed? It’s really all the same. The SECUMAX 150 fits perfectly in any hand. Gently arching outer edges, coupled with light ribbing and a low weight, ensure an ergonomic experience.

Full points in three regards.SECUMAX 150 resolves several issues in one. With its concealed blade, you will never have to worry about injuring yourself or damaging your goods. Thanks to its versatility, you only need the one tool to cut, scrape and split. And with its 24 grams and ergonomic design, the SECUMAX 150 won‘t weigh you down with fatigue after a day of cutting. In short: it is the cutting tool you have been waiting for.

Application


Technical features


PRODUCT DETAILS

Knife size (L x W x H) 148 x 11 x 37.2 mm


Weight 24.4 g

Weight per unit (loose) 24.4 g


ACCESSORIES

SECUMAX 150 loose (10 in multipack) NO. 150001.08

ALL VARIANTS

Installed blade

The blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.30 mm.


22 23

SECUMAX 145NO. 145001.12

2 in 1 blade headThe blade head provides two functions: cutting and piercing. Use the knife‘s noses to the left and right of the blade to effortlessly pierce materials (e.g. card and film), and the blade head’s corners for packing tape.

Concealed bladeWith a 4 mm blade access, the blade is highly con-cealed. Out of reach for fingers but accessible to the materials to be cut. And contents under the cutting surface will also be kept safe from contact with the cutting edge.

Flat and robust designIt is not just the handle that has an extremely flat de-sign – the cutting channel too measures just 1.5 mm, requiring less effort for cutting. The tool also re-tains its strength – thanks to a 0.5 mm blade and high-quality plastic.

Light and easyThe SECUMAX 145 is so lightweight that users will hardly notice it. This is aided by the comfortably rounded handle at just 4 mm wide, and thumbs will intuitively find their place at the ergonomically designed grooves.

Clever guide surfacesA tip from us on cutting card: hold the blade at an angle to improve cutting! It is no accident that the guide surfaces are located at the front of the knife – they aid cutting at the most effective angle.

Compact design. Powerful performance.The SECUMAX 145 is our clever, compact safety knife for rou-tine cutting tasks. The glass-fibre reinforced plastic handle and 0.5 mm strong blade gives it remarkable robustness. At just 12 g it is also extremely light. The disposable cutting tool eas-ily copes with single-layer cardboard, film and packing tape, for example. The two cutting edges are safely concealed to protect fingers.

Application


Technical features


PRODUCT DETAILS



Weight 12.0 g

Weight per unit (10 in box) 136.0 g


ACCESSORIES

SECUMAX 145 10 in box (loose) NO. 145001.12

ALL VARIANTS

Installed blade

The blade is moulded into the body of the knife and cannot be changed. Blade thickness 0.50 mm.


45°

24 25

SECUMAX EASYSAFENO. 121001.02

For people and goodsThe concealed blade pro-vides reliable protection to you and your goods. And your company? It benefits too, naturally. Productivity is high when everything goes smoothly.

4-times usable bladeWhy do you benefit more from your blade? With its four sharp edges, it can be rotated four times. That‘s why. The result? Blade life is quadrupled and you stay sharp for longer.

Ergonomic handleYour cutting tool never leaves your hand? Then it is even more important that it is as comfortable as possible, and that it causes as little fatigue as possible. The ergonomic handle is designed with you in mind.

Lockable bladeThis cutter is lockable. With a specially shaped key, you can lock it, and thereby prohibit blade change. This is a particularly interesting feature for all conscientious work places.

For packaging tapeYou might be wondering what the small metal plate on the top side of the SECUMAX EASYSAFE does… Try it out! Set the plate against the tape of a taped box, apply enough pressure to piece the tape, and slice!

It‘s all easy. It‘s all safe.The SECUMAX EASYSAFE convinces with its special features. The prominent and pointed nose of the cutting tool easily pierces plastic sacks and film-wrapped pallets. The concealed blade easily cuts the sacks and film. An integrated plastic ‚material-guide‘ makes cutting thin film and paper sheets easier; even individual layers won‘t jam. And thin textiles and plastic strapping? No problem for the concealed blade!

Application

INDUSTRIAL BLADE 0.30 mm, stainless, NO. 145.60 10 in transparent packaging

OPTIONAL BLADES


Technical features


LOCKING KEY EASYSAFE NO. 9890.74




NO. 9845.06

SAFEBOX NO. 108000.00

ACCESSORIES

PRODUCT DETAILS



Weight 66.3 g



SECUMAX EASYSAFE 1 in single unit box (10 in multipack) NO. 121001.02

Installed blade: INDUSTRIAL BLADE 0.30 mm, 10 in transparent packaging NO. 45.60

ALL VARIANTS

85% original size

45°

26 27

SECUMAX COMBI 1 in single unit box (10 in multipack) NO. 109137.02

Installed blade: INDUSTRIAL BLADE 0.40 mm, deep-edged, 10 in transparent pack NO. 37040.60

SECUMAX COMBI with thin blade 1 in single unit box (10 in multipack) NO. 109437.02

Installed blade: INDUSTRIAL BLADE 0.10 mm, 10 in magazine NO. 37010.50

SECUMAX COMBI with stainless steel blade 1 in single unit box (10 in multipack) NO. 109037.02

Installed blade: INDUSTRIAL BLADE 0.30 mm, stainless, 10 in transparent pack NO. 13730.60

SECUMAX COMBI with thin stainless steel blade 1 in single unit box (10 in multipack) NO. 109135.02

Installed blade: INDUSTRIAL BLADE 0.10 mm, Gillette-slotted, stainless, TEFLON®-coated, edges platinumized, 500 blades (each paper-wrapped) NO. 13510.35

SECUMAX COMBINO. 109137.02

Safety firstThe concealed blade pro-tects you and your goods. The long, rounded nose guides you as you cut. All in all, cutting with the SECUMAX COMBI is a safe and precise event.

4-times usable bladeIncrease the time of the blade by being sure to use all four sharp corners, one after another. In this way, you can minimize costs while ensuring your cutter performs consistently.

Ergonomic handleHandle every job with ease! The ergonomically shaped handle of the SECUMAX COMBI helps you to work quickly and effectively.

Tool-less blade changeWhen the time comes, you can change your blade easily and safely. Manually loosen the screw holding the blade cover shut, open the cover and take out the blade. Ro-tate or replace to the blade, and continue cutting.

For packaging tapeThe SECUMAX COMBI is a cutting tool with many excellent properties, includ-ing the ability to effortlessly split adhesive tape. Use the integrated small metal plate located at the head of the tool for best results.

Combines performance with safety.The SECUMAX COMBI is our best weapon for defeating all types of packaging film. Stretch film, shrink film or wrapping film? Thick or thin? Anything you need to cut. And the con-cealed blade means it can come neither close to you nor your goods. This is what we call “maximum safety“. Asides from film, you can cut plastic strapping band, leather and with the right blade, even safety belt.

Application


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 45.0 g



INDUSTRIAL BLADE 0.40 mm, deep-edged, 10 in magazine NO. 36040.50

INDUSTRIAL BLADE 0.30 mm, 10 in magazine NO. 37030.50


INDUSTRIAL BLADE 0.30 mm, Gillette-slotted, 10 in magazine NO. 35030.50

INDUSTRIAL BLADE 0.30 mm, stainless, 500 blades (each paper-wrapped) NO. 13630.35

INDUSTRIAL BLADE 0.30 mm, stainless, TiN coated, 100 blades (each paper-wrapped) NO. 83730.31


OPTIONAL BLADES (for 109137.02 and 109037.02)ALL VARIANTS

45°

28 29

SECUMAX COMBINO. 109237.02

Safety firstThe concealed blade pro-tects you and your goods. The long, rounded nose guides you as you cut. All in all, cutting with the SECUMAX COMBI is a safe and precise event.

4-times usable bladeIncrease the time of the blade by being sure to use all four sharp corners, one after another. In this way, you can minimize costs while ensuring your cutter performs consistently.

Ergonomic handleHandle every job with ease! The ergonomically shaped handle of the SECUMAX COMBI helps you to work quickly and effectively.

Blade change only with a keyThe SECUMAX COMBI with safety screw is an interes-ting alternative for all sensitive industries. Only those employees with the required locking key have access to the blade and the right to either rotate or change.

For packaging tapeThe SECUMAX COMBI is a cutting tool with many excellent properties, includ-ing the ability to effortlessly split adhesive tape. Use the integrated small metal plate located at the head of the tool for best results.

Combines performance with even more safety.The SECUMAX COMBI is our best weapon for defeating all types of packaging film. Stretch film, shrink film or wrapping film? Thick or thin? Anything you need to cut. And the con-cealed blade means it can come neither close to you nor your goods. This is what we call “maximum safety“. Asides from film, you can cut plastic strapping band, leather and with the right blade, even safety belt. Blade changing is also ex-tremely safe, thanks to a safety screw that allows that only key-holders to change the blade.

Application




INDUSTRIAL BLADE 0.30 mm, Gillette-slotted, 10 in box NO. 35030.20


INDUSTRIAL BLADE 0.30 mm, stainless, 10 in transparent packaging NO. 13730.60

INDUSTRIAL BLADE 0.30 mm, stainless, TiN-coated, 100 blades (each paper-wrapped) NO. 83730.31


OPTIONAL BLADES


Technical features


LOCKING KEY COMBI NO. 9855.74




NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 45.0 g



SECUMAX COMBI with safety screw 1 in single unit box (10 in multipack) NO. 109237.02

Installed blade: INDUSTRIAL BLADE 0.40 mm, deep-edged, 10 in transparent packaging NO. 37040.60

ALL VARIANTS

30 31

SECUMAX NOVEXNO. 539.00

Longer usePlastic doesn‘t always mean plastic. In the SECUMAX NOVEX it is par-ticularly abrasion resist-ant. Both the handle and blade head benefit from this. And, of course, you as the user.

4-cutting edge bladesEver seen this before? Your quality blade has four sharp cutting edges that you can use one after the other. You can therefore clearly benefit from your blade for longer.

Flexible handlingNo matter whether you are left or right handed: The SECUMAX NOVEX has been shaped to fit in any hand. For high cutting frequen-cies too, if necessary.

Eyelet for fasteningSmall hole, large effect. Use the practical eyelet to put a strap on your cutting tool. Now you can hang it up in a place where you can always find it.

Wide blade access. Wide range.You need a strong tool to cut strong packaging film. The SECUMAX NOVEX is strong. And safe. Its concealed blade ensures maximum user safety. This cutter can handle thicker materials like fleece or felt. Plastic strapping band, leather, and even safety belt for example, are no obstacle for the SECUMAX NOVEX.

Application




INDUSTRIAL BLADE 0.30 mm, Gillette-slotted, 10 in box NO. 35030.20





OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS


Main material Plastic

Weight 90.0 g

Weight per unit (self-service card) 108.0 g


SECUMAX NOVEX 1 on self-service card (5 in multipack) NO. 539.00


ALL VARIANTS

32 33

SECUMAX OPTICUTNO. 437.00

4-times usable bladeBefore you need to change your blade, you have the option of rotat-ing it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favoura-ble for your company!

Work ergonomicallyIt‘s easy to work ergonom-ically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn‘t be more comfortable.

Cut cleanWhether cutting foam or film, the bendable plastic material-guide reliably stops material jamming in front of the blade. The same guide simultaneously protects your fingers from blade contact.

Extremely robustThe glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cut-ting tool for an extended period of time.

Easy blade changeBlade change is performed using the small, rotating bracket found on the cut-ter side. Swing, press and release the guide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place.

Glides over the material. And right through the middle. For “push“ cutting.You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that‘s not afraid of stub-born foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated, metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam less ease through whatever material you want to cut. Ideal for “push“ cutting.

Application

OPTIONAL BLADES


Technical features




NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 74.0 g



SECUMAX OPTICUT 1 on self-service card (5 in multipack) NO. 437.00


SECUMAX OPTICUT with additional side protection 1 on self-service card (5 in multipack) NO. 434.00


SECUMAX OPTICUT with a short metal base 1 on self-service card (5 in multipack) NO. 433.00


ALL VARIANTS

INDUSTRIAL BLADE 0.30 mm, stainless, 10 in transparent packaging NR. 13730.60


34 35

SECUMAX OPTICUTNO. 436.00

4-times usable bladeBefore you need to change your blade, you have the option of rotating it mul-tiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company!

Work ergonomicallyIt‘s easy to work ergonom-ically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn‘t be more comfortable.

Cut cleanWhether cutting foam or film, the bendable plastic material-guide reliably stops material jamming in front of the blade. The same guide simultaneously protects your fingers from blade contact.

Extremely robustThe glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cut-ting tool for an extended period of time.

Easy blade changeBlade change is performed using the small, rotating bracket found on the cut-ter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place.

Glides over the material. And right through the middle. For “pull“ cutting.You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that‘s not afraid of stub-born foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated, metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam less ease through whatever material you want to cut. Ideal for “pull“ cutting.

Application



OPTIONAL BLADES


Technical features




NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 74.0 g



SECUMAX OPTICUT 1 on self-service card (5 in multipack) NO. 436.00


SECUMAX OPTICUT with additional side protection 1 on self-service card (5 in multipack) NO. 435.00


ALL VARIANTS

36 37



INDUSTRIAL BLADE 0.13 mm, 250 blades (each paper-wrapped) NO. 36013.39


INDUSTRIAL BLADE 0.30 mm, stainless, 10 in transparent pack NO. 13730.60



SECUMAX SNITTYNO. 43037.00

Practical assistantThe SECUMAX SNITTY is small, light and handy. Its round handle sits on a sliding base, which is slant-ed at the front. This makes access to individual paper and film layers easier.

4-cutting edge bladesYour safety knife is fitted with a 0.2 mm thin quality blade. You can turn it and turn it around many times – and thus quadruple your usage time. It‘s worth it for you.

Changing blades - easy and safeThe blade carrier is inte-grated into the handle. You just have to pull it out to change the blades - and the old blade is ready to change. The rough surface of the blade carrier makes handling it easier.

Left and rightThe SECUMAX SNITTY fits into every hand. Yours too. The rounded plastic han-dle does not differentiate between left and right. Try it out and see!

A well rounded knife. For paper and film.A paper and film cutter that guides the cutting material itself? Meet the SECUMAX SNITTY. Its integrated plastic material-guide guides thin material in the direction of the blade, smoothing out bumps and preventing jamming. The 4-times usable blade lays at a 45° degree angle to the cutting material. An optimal angle for easy cutting.

Application


Technical features




NO. 9845.06


ACCESSORIES

PRODUCT DETAILS

Knife size (L x W x H) 100 x 10.5 x 58 mm


Weight 28.0 g



›› All blades from page 148 onwards.

SECUMAX SNITTY 1 on self-service card (10 in multipack) NO. 43037.00


ALL VARIANTS OPTIONAL BLADES

38 39

Application

Adjustable cutting depth. You choose!Paper, film, foam? Not a problem at all! But wait, there‘s more! The SECUMAX MOBILEX is the only safety knife with a concealed blade and an adjustable cutting depth. Make blade access larger or smaller by setting the in-built cutting depth adjuster. Set a depth as low as 2 mm, or as great as 10 mm. It all depends on your requirements and the size of the ma-terial you need to cut.

SECUMAX MOBILEXNO. 45137.00

SECUMAX MOBILEX 1 on self-service card (5 in multipack) NO. 45137.00







ALL VARIANTS

OPTIONAL BLADES



Technical features


PRODUCT DETAILS



Weight 47.5 g



WALL MOUNT BRACKET USED BLADE CONTAINER NO. 9845.06


ACCESSORIES

Make way for the specialist.An expert in cutting flat paper and plastic sheets? You‘ve found it in the handy SECUMAX COUPPY. Its concealed blade lies at a 45 degree angle to the cutting material. An optimal angle for easy cutting. A flat, clean base allows the safety knife to slide smoothly. The cleverly rounded head of the cut-ter intuitively guides the cutting material towards the blade.


SECUMAX COUPPYNO. 43136.00

PRODUCT DETAILS



Weight 19.0 g


SECUMAX COUPPY 1 on self-service card (10 in multipack) NO. 43136.00


INDUSTRIAL BLADE 0.13 mm, 250 blades (each paper-wrapped) NO. 36013.39





ALL VARIANTS

OPTIONAL BLADES

Application





ACCESSORIES


Technical features

›› Further information from page 132 onwards.›› Further information from page 132 onwards.

40 41

Application

Up to 40 in one sweep.The SECUMAX ZEPHER stands out, in every respect. Due to its size, its design, and the way its is used. What other cutter can cut up to 40 layers of plastic film at once? Or paper lay-ered to a similar thickness? The wedge shaped metal cutting foot makes it so easy to cut into a roll of material. And easy to keep the cut rolling. The blade is concealed for your protection.

SECUMAX ZEPHERNO. 336.02

SECUMAX ZEPHER 1 in single unit box () NO. 336.02

Installed blade: TRAPEZOID BLADE 0.55 mm, single bevel edge-ground, 10 in magazine NO. 694.60

ALL VARIANTS


Technical features


PRODUCT DETAILS



Weight 172.0 g





ACCESSORIES

Confidently cuts through the layers.Designed for the purpose of cutting back top layers from paper and film rolls, the SECUMAX SHEETING CUTTER is aptly named. And with its strong profile, ergonomic shape and concealed blade, it lives up to its calling. Unlike the SECUMAX ZEPHER, you can cut only a few layers at a time. But because the head is so narrow, it follows the blade easily through the material, making cutting efficient.


SECUMAX SHEETING CUTTERNO. 335.00

PRODUCT DETAILS



Weight 38.3 g


SECUMAX SHEETING CUTTER 1 on self-service card (10 in multipack) NO. 335.00

Installed blade: TRAPEZOID BLADE 0.40 mm, single bevel edge-ground, 10 in magazine NO. 693.50

ALL VARIANTS

Application

BELT HOLSTER M WITH CLIP NO. 9921.08




ACCESSORIES


Technical features



70% original size 90% original size

42 43

SECUMAX POLYCUT loose (50 in multipack) NO. 85000.08

SECUMAX POLYCUT glass fibre reinforced plasticloose (50 in multipack) NO. 85001.08

SECUMAX POLYCUT with stainless steel blade loose (50 in multipack) NO. 85002.08

SECUMAX POLYCUTNO. 85000.0

It‘s all protectedThe quality blade is safely embedded between the nose and the handle. So it only cuts what you really want to cut. And there is no risk to your goods while doing so.

No blade changeThe SECUMAX POLYCUT is a disposable cutter. Since you do not have to change the blade, neither you nor your staff can come into contact with it. An addition-al benefit as far as safety is concerned.

Long, pointed noseWhy the extra long and pointed nose in the SECU-MAX POLYCUT? Because you can place it particularly well in the spaces in between . The cutting material is also led to the blade in a much more reliable way.

Pokes its nose into everything.The SECUMAX POLYCUT is another of our small, plastic dis-posable cutters. Not to be overlooked, this cutter is a proud member of our product range. Its extra-long and pointed nose makes it very special indeed. Try using it to open a letter. Or to cut film bridging a narrow channel, for example when splicing. The SECUMAX POLYCUT makes tasks such as these a breeze. That this tool is comfortable to use goes without saying.

Application


Technical features


PRODUCT DETAILS

Knife size (L x W x H) 75.5 x 3 x 45 mm


Weight 7.0 g

Weight per unit ( ) 7. g

MATADOR NO. 104000.08

ACCESSORIES


Installed blade The blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.30 mm.

Installed blade The blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.30 mm.

Installed blade The stainless blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.30 mm.

ALL VARIANTS

44 45

Doesn‘t rest. Doesn‘t rust.The SECUMAX PLASTICUT is different from the other products in our range but only in the detail. But you know: that‘s what often matters most. This flexible disposable cutter is best used for thin film and paper. Due to its width of just 3 mm, cutting protective film stretched over a thin gulley as between door and pillar on a new car is also possible. The blade is made of stainless steel, the cutting edge is TiN-coated. And: the SECUMAX PLASTICUT is perforated - in case you want to add additional fittings later on.

SECUMAX PLASTICUTNO. 3469.08

PRODUCT DETAILS



Weight 6.3 g


Application

The TIN-coated stainless steel blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.30 mm.

SECUMAX PLASTICUT loose (50 in multipack) NO. 3469.08

ALL VARIANTS


Technical features



SAFETY FINGER CATCH NO. 103000.08

ACCESSORIES

Installed blade

Cut film? Easy-peasy.What the SECUMAX POLYPICK has is best shown by compari-son. With a width of 3 mm, it is somewhat thicker than most of our other disposable film cutters. This advantage in stabili-ty will help you open film welded pallets for example. Anoth-er plus point is its relatively long and pointed nose. It makes piercing into the cutting material easier.

SECUMAX POLYPICKNO. 469.08

Application

PRODUCT DETAILS



Weight 5.8 g



Technical features



ACCESSORIES


SECUMAX POLYPICK loose (50 in multipack) NO. 469.08

ALL VARIANTS

Installed blade



46 47

Ventures where others won‘t. With stainless steel blade.Funnily enough, the SECUMAX CARDYCUT bears striking re-semblance to the two materials it best likes to cut: thin paper and film. With a wall thickness of a miniscule 2 mm, this cut-ter is one of our most slender. It is also extremely flexible. You can reach places with the SECUMAX CARDYCUT that other cutters just won‘t dream of going. Tiny gaps, for example, and narrowest of spaces.

SECUMAX CARDYCUTNO. 7469.08

PRODUCT DETAILS



Weight 5.5 g


Application

SECUMAX CARDYCUT loose (50 in multipack) NO. 7469.08

ALL VARIANTS


Technical features



ACCESSORIES

Some clear advantages. With stainless steel blade.You will always gain insight with the SECUMAX CARDYCUT since it is made of plastic that is clear as glass. This makes visual control when cutting film and paper easier. Thanks to its small and compact design, it runs very smoothly, for example, when cutting into curves and in especially narrow slits. As a specialist for thin film it is used frequently in the automobile industry.

SECUMAX CARDYCUTNO. 5469.08

Application

PRODUCT DETAILS



Weight 6.5 g



Technical features



SAFETY FINGER CATCH NO. 103000.08

ACCESSORIES

SECUMAX CARDYCUT loose (50 in multipack) NO. 5469.08

ALL VARIANTS


Installed blade


Installed blade



48 49

Slices anything that‘s soft.The SECUMAX TRENNEX is a disposable cutter made of a sta-ble plastic. It‘ll efficiently cut an array of different materials, but does prefer to work with those of a softer substance. Foam, pipe insulations, perforated film and coarsely meshed textiles are all materials the SECUMAX TRENNEX loves to cut. The tip of its nose is significantly rounded. This prevents hooking and tripping. Minor detail, major effect.

SECUMAX TRENNEXNO. 62000.08

PRODUCT DETAILS



Weight 6.6 g


Application

SECUMAX TRENNEX loose (50 in multipack) NO. 62000.08

SECUMAX TRENNEX glass fibre reinforced plastic loose (50 in multipack) NO. 62001.08

ALL VARIANTS


Technical features



ACCESSORIES

Your visiting card. With a blade.As fragile as the SECUMAX VISICUT may appear, it is a really sharp cutting tool. And a popular advertiser too. If you look closely, it is like a business card with an in-built quality blade. So why not also your new business card? Your name, logo and your claim printed on it would always be there when your customers, friends and partners open their letters with it.

SECUMAX VISICUTNO. 470.08

Application

PRODUCT DETAILS



Weight 8.0 g



Technical features


SECUMAX VISICUT loose (50 in multipack) NO. 470.08

ALL VARIANTS


Installed blade


Installed blade›› Further information from page 132 onwards.


Installed blade

50 51

SECUMAX 565NO. 565001.00

Sharp, but not dangerousTake a good look at the cuts. Noticed anything? None of them have been cut at an angle, as all of the cuts are at right-angles. Therefore you cannot cut yourself, only the large range of potential materials.

Non-rusting stainless steelYou will be able to use your scissors for a very long time as the metal parts are made from non-rusting stainless steel. The handles have been coated in a plas-tic reinforced with fibre-glass. Another guarantee for a long service life.

Comfortable workingThe experts call them “eyes” and these are the two big openings in which you insert your fingers to securely hold the scissors. The “soft-grip” on the in-sides also helps to ensure comfortable and non-slip working.

Unscrewing gripsEven though the SECUMAX 565 is an allrounder, it is not restricted just to cut-ting. A cap that you cannot unscrew? Just use the grips embedded in the handles and the problem will be solved in no time at all!

Integrated wire cutterIf you open the scissors a little wider you will be able to use the wire-cut-ter notch integrated above the screw. Simply slide the wire or cable in place and then cut it to the required length. This notch can also be used for stripping cables.

The all-rounder. At work and at home.Our all-purpose tool for professional cutting. Ideal for larger hands – or in case you wear gloves during work. Cardboard, paper, films, fabrics and much more cannot withstand its powerful cuts. You also have the best protection thanks to the special sharpening and the rounded tips. The wire-cutter facility can be used to cut through wires and cables, and the additional grips integrated in the handle to open caps.

Application


Technical features


PRODUCT DETAILS

Scissors size (L x W x H) 216 x 13 x 83 mm

Main material Stainless steel

Weight 122.0 g


SECUMAX 565 1 on self-service card (10 scissors in multipack) NO. 565001.00

ALL VARIANTS

80% of original size


ACCESSORIES


52 53

SECUMAX 564NO. 564001.00


Non-rusting stainless steelYou will be able to use your scissors for a very long time as the metal parts are made from non-rusting stainless steel. The handles have been coated in a plas-tic reinforced with fibre-glass. Another guarantee for a long service life.

Comfortable workingThe experts call them “eyes” and these are the two openings in which you insert your fingers to securely hold the scissors. The “soft-grip” on the in-sides also helps to ensure comfortable and non-slip working.

Extra-long cutting edgesFast and controlled – you will cut through easily using the SECUMAX 564 Fast, thanks to the long cutting edges. Controlled, as the entire length from the finger opening to the tip can be used as a sup-port surface.

Sturdy connectionA matter of course for quality scissors: Both of the cutting edges are held together by a real screw. This ensures sturdy con-nection and permanent high cutting power.

Thumbs up – for very long cuts.The SECUMAX 564 is characterized by its thumb opening and its extra-long edge, which also makes an ideal support sur-face. These safety scissors enable you to completely control your work. Moreover, you need fewer cuts to complete the job of cutting through cardboard, paper, film, fabric and much more. Highest safety guaranteed by the special sharpening of the cutting blades and the rounded tips.

Application


Technical features


PRODUCT DETAILS

Scissors size (L x W x H) 218 x 12 x 82 mm


Weight 93.0 g



ALL VARIANTS


ACCESSORIES


54 55

SECUMAX 363NO. 363001.00


Non-rusting stainless steelYou will be able to use your scissors for a very long time as the metal parts are made from non-rusting stainless steel. The han-dles have been coated in a plastic reinforced with fibre-glass. Another guar-antee for a long service life.

Comfortable workingThe experts call them “eyes” and these are the small openings in which you insert your fingers to securely hold the scissors. The “soft-grip” on the in-sides also helps to ensure comfortable and non-slip working.

Short cuttingIn brief: this is true pre-cision! This makes the SECUMAX 363 especially suitable for precise, so-phisticated cutting. The scissors will not drift away from your line, even when you want to cut in the smallest corners.

Sturdy connectionA matter of course for quality scissors: Both of the cutting edges are held together by a real screw. This ensures sturdy con-nection and permanent high cutting power.

Precise to the millimeter. In many regards.Our safety scissors for extra fine and targeted cuts. It is play-fully easy to direct, using your thumb and forefinger only. And just like its big brothers, the lightweight cuts through cardboard, paper, film, fabrics, yarn and strapping band. Your fingers and hand are protected against injuries by the spe-cial way the scissors have been sharpened in addition to the rounded tips.

Application


Technical features


PRODUCT DETAILS

Scissors size (L x W x H) 134 x 8 x 65.5 mm


Weight 36.8 g



ACCESSORIES


ALL VARIANTS


Fully automatic blade retraction

The intelligent cutting tool: as soon as the

blade leaves the cutting material, it withdraws

automatically into the handle - without you

having to do anything. That‘s what we call

“a very high degree of safety.“

SECU

PR

O

45°

58 59

SECUPRO 625NO. 625001.02

Excellent ergonomicsWe have rarely produced a cutting tool before that fits so perfectly into the heavy users hand as the SECUPRO 625. The long and smooth lever, the round shape of the handle and the soft-grip at the back of the knife – it’s more than worth testing it!

Robust and balancedYou can see and feel that the handle is made of high-quality aluminium. Its robust construction goes hand in hand with an op-timal weight distribution. Consequently, there’s al-most no risk of weakening for tool and user. Not even when cutting very heavily.

Large cutting depthThe long blade extension is ideal for cutting up to 3-ply cardboard boxes, rubber, material on reels and many more applications. The blade can be changed in a few steps – by pushing the blade change button and pressing the lever, it can be easily pulled out.

For many cutting typesThe overall package of the SECUPRO 625 is quite unique – and so are all sep-arate features. Even saw cutting is safe – thanks to the protecting blade retrac-tion. And you can enlarge the number of different application areas by simply installing one of the option-al blades.

Safe along the lineWhile you rely on the blade retraction at the front part of the handle, there’s an-other safety feature built in for even more protection. You can lock the level and thus avoid that the blade is released unintentionally.

Long lever. Long blade. Long-lasting enjoyment.The new SECUPRO 625 goes straight to the top position of our list with squeeze-grip knives. Its aspiration is very clear: pre-mium. Because it offers all that professional users require: an aluminium handle, an easy and smooth lever to release the blade, a large cutting depth combined with a very high safety due to the fully automatic blade retraction and a comfortable blade change. All in all, you will know that you have a high-end cutting tool in your hands.

Application


Technical features


BELT HOLSTER L WITH CLIP NO. 9922.08



NO. 9845.06


ACCESSORIES

PRODUCT DETAILS


Main material Aluminium

Weight 151.0 g



SECUPRO 625 with rounded-tip trapezoid blade 1 in single unit box (10 in multipack) NO. 625001.02

Installed blade: TRAPEZOID BLADE 0.63 mm, rounded blade tips, deep-edged, 10 in dispenser NO. 60099.70

SECUPRO 625 with trapezoid blade 1 in single unit box (10 in multipack) NO. 625002.02

Installed blade: TRAPEZOID BLADE 0.63 mm, deep-edged, 10 in dispenser NO. 99.70

SECUPRO 625 with stainless steel trapezoid blade 1 in single unit box (10 in multipack) NO. 625004.02

Installed blade: TRAPEZOID BLADE 0.63 mm, deep-edged, stainless, 10 in dispenser NO. 199.70

SECUPRO 625 with hook blade 1 in single unit box (10 in multipack) NO. 625003.02

Installed blade: HOOK BLADE 0.63 mm, 10 in dispenser NO. 98.70

ALL VARIANTS

45°

60 61

SECUPRO MARTEGONO. 122001.02

Perfect handlingThe advantages of the SECUPRO MARTEGO lie in your hands. The curved and lockable housing, the soft-grip for better han-dling, the “pre-set” cutting edge; these three factors guarantee an ergonomic experience.

4-edged bladeThe Solingen quality blade, with its four sharp edges, can be rotated multiple times. It‘s worth it! In the meantime, a relatively small cutting depth pro-tects your goods from unnecessary damage.

Change safelyWhen you need to change the blade, you can do so without any additional tools. Here, the “pull” of the SECUPRO MARTEGO is revealed: the integrated magnet ensures that the blade cannot fall out.

Everything under controlIt‘s all about aluminium. The powder-coated metal body does not only con-tribute to the SECUPRO MARTEGO’s extraordinary design. It credits the cutter with extreme robustness and durability.

Blade lock for extra protectionYour SECUPRO MARTEGO accompanies you on your job at every cut and turn? Glad to hear it. But always press the blue activator when you’ve finished cutting! This way the blade cannot make a surprise appearance.

For highest demands.A cutting tool in which function and design go hand in hand? Meet SECUPRO MARTEGO, our prize winning lockable cutter with fully automatic blade retraction. Get used to the word “very” in its presence: it‘s very safe, very robust, very ergo-nomic, very versatile, and made to very high standards. This cutter is not only suitable for both right and left-handed us-ers, but also for those with larger hands.

Application


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 105.0 g



SECUPRO MARTEGO 1 in single unit box (10 in multipack) NO. 122001.02

Installed blade: INDUSTRIAL BLADE 0.40 mm, deep-edged, 10 in safety dispenser NO. 92.66

INDUSTRIAL BLADE 0.40 mm, stainless, 10 in safety dispenser NO. 192.66


45°

62 63

SECUPRO MERAKNO. 124001.02

Ergonomic formWhether with the right hand or the left hand: you will use the SECUPRO MERAK gladly and effectively. The cutter is shaped with er-gonomics in mind, and the force required to activate and release the lever is appropriately minimal, even at high cutting frequencies.

4-times usable bladeOne blade, four sharp edges. You clearly get more out of your blade; four times more in fact. Rotat-ing the blade allows you to cut with a constant cutting force, all the way through your work day.

Safe blade changeYou can change your blade without any additional tools, and without disman-tling the SECUPRO MERAK. You have nothing to lose: an integrated magnet prevents the blade from falling out.

Light and stableA particularly abrasion resistant plastic has been used for the SECUPRO MERAK. Nevertheless, it has a comfortable weight. Your cutting arm is protect-ed from fatigue, and your cutter from wear and tear.

Press for safetyYou can prevent uninten-tional blade activity by activating the small blue blade lock. Simply press against the pictured lock to protect yourself from injury whenever your cutter is stationary.

Safety, comfort? Everything under (lockable) control!The SECUPRO MERAK is our practical, lockable cutter with fully automatic blade retraction. With SECUPRO MARTEGO’s “little brother” we have thought about one thing in particular: you. The lightweight and user friendly SECUPRO MERAK lets you work safely, with little risk of cutting exhaustion. And there’s much more: thanks to a shallow cutting depth, your goods are also well protected. No matter what material you cut.

Application


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 59.0 g



SECUPRO MERAK 1 in single unit box (10 in multipack) NO. 124001.02

Installed blade: INDUSTRIAL BLADE 0.40 mm, deep-edged, 10 in safety dispenser NO. 92.66

INDUSTRIAL BLADE 0.40 mm, stainless, 10 in safety dispenser NO. 192.66


6

45°

64 65

SECUPRO MEGASAFENO. 116006.02

Robust handleThe body of our top qual-ity SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting mate-rials with this cutter. Even multi-layered ones.

Change without openingBlade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the cutter, and push the slider com-pletely forward. The blade is ready for changing.

Perfect handlingThe lightly rounded handle fits particularly well in your hand. Your thumb doesn‘t get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad.

Double-sided sliderWith the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that‘s accessible from both sides. Choose for yourself!

Double-edged bladeBefore you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new.

Quality that‘s visible.Would you like to have a safety knife with a large blade exten-sion? Or are you looking for a worthy replacement for either OPTISAFE or MAXISAFE? In both cases, the SECUPRO MEGA-SAFE is your top choice. Thanks to a cutting depth of up to 17 mm, this cutter doesn‘t shy away from a challenge. And no matter your task, safety is always guaranteed; the fully auto-matic blade retraction functions even when you decide not to extend the blade. Rounded blade tips round off the package.

Application


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 142.0 g



SECUPRO MEGASAFE with rounded-tip trapezoid blade 1 in single unit box (10 in multipack) NO. 116006.02


SECUNORM MEGASAFE with trapezoid blade 1 in single unit box (10 in multipack) NO. 116001.02


SECUPRO MEGASAFE with stainless steel trapezoid blade 1 in single unit box (10 in multipack) NO. 116004.02


SECUPRO MEGASAFE with hook blade 1 in single unit box (10 in multipack) NO. 116002.02


SECUPRO MEGASAFE with a more slender trapezoid blade 1 in single unit box (10 in multipack) NO. 116003.02

Installed blade: TRAPEZOID BLADE 0.30 mm, 10 in dispenser NO. 609.70

ALL VARIANTS

45°

66 67

SECUPRO MAXISAFENO. 101806.02

3-sided sliderWith the right hand? With the left hand? From the top? Regardless of how you wish to activate the blade, SECUPRO MAXISAFE is totally flexible. Its 3-sided slider allows for comforta-ble, variable handling.

At the press of a buttonYour two hands alone are enough to change the blade. And these short in-structions: press the blade change button and swing open the handle. Push the blade carrier to the front and you can change the blade. It’s that easy.

Metal guardSECUPRO MAXISAFE is not afraid of a little friction. A metal abrasion protection shield, found on the un-derside of the knife head, works to prevent any general wear and tear as you cut your path through the day.

Double-edged bladeDon‘t change your blade the moment the tip turns blunt. Double the usage time of your blades and minimize wastage by al-ways remembering to flip them over. Don‘t forget: there are two sides to every blade!

Small eyeletNo one likes to lose his tools. Especially not tools like the SECUPRO MAXI-SAFE. That’s what the eye-let is for: to safely transport and/or tether your cutter.

Maximum comfort. With a 3-sided slider.Are you often only satisfied with the maximum? That connects you to the SECUPRO MAXISAFE, our safety knife with fully automatic blade retraction. Thanks to its large blade exten-sion, it masters even 3-ply cardboard boxes - depending on the blade shape attached - but also all other materials such as carpets or films, for example. It also provides maximum comfort, whether you are right or left handed. Another special feature: the rounded off blade tip.

Application


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 65.4 g



SECUPRO MAXISAFE with rounded-tip trapezoid blade 1 in single unit box (10 in multipack) NO. 101806.02


SECUPRO MAXISAFE with trapezoid blade 1 in single unit box (10 in multipack) NO. 101899.02


SECUPRO MAXISAFE with stainless steel trapezoid blade 1 in single unit box (10 in multipack) NO. 101803.02


SECUPRO MAXISAFE with hook blade 1 in single unit box (10 in multipack) NO. 101898.02


ALL VARIANTS

45°

68 69

SECUPRO MAXISAFENO. 101860.02

3-sided sliderWith the right hand? With the left hand? From the top? Regardless of how you wish to activate the blade, SECUNORM MAXISAFE is totally flexible. Its 3-side slider provides comfortable, variable handling.

At the press of a buttonYour two hands alone are enough to change the blade. And these short in-structions: press the blade change button and swing open the handle. Push the blade carrier to the front and you can change the blade. It’s that easy.

No abrasionSECUPRO MAXISAFE is not afraid of a little friction. A metal abrasion protection shield, found on the un-derside of the knife head, works to prevent any general wear and tear as you cut your path through the day.

Double-edged bladeDon‘t change your blade the moment the tip turns blunt. Double the usage time of your blades and minimize wastage by al-ways remembering to flip them over. Don‘t forget: there are two sides to every blade!

Small eyeletNo one likes to lose his tools. Especially not tools like the SECUPRO MAXI-SAFE. That’s what the eyelet is for; to safely transport and/or tether your cutter.

Maximum robustness. With a 3-sided slider and metal cap.Are you often only satisfied with the maximum? That con-nects you to the SECUPRO MAXISAFE, our safety knife with the fully automatic blade retraction. Thanks to its large blade extension it masters even 3-layer cardboard boxes, but de-pending on the blade shape attached also all other materials such as carpets or films, for example. Its take up qualities also provide the maximum - thanks to the metal cap at the front, on the handle. Another special feature: the rounded off blade tip.

Application

TRAPEZOID BLADE 0.63 mm, deep-edged, stainless, 10 in dispenser NO. 199.70

OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 80.4 g



SECUPRO MAXISAFE with metal cap and rounded-tip trapezoid blade 1 in single unit box (10 in multipack) NO. 101860.02


SECUPRO MAXISAFE with metal cap and trapezoid blade 1 in single unit box (10 in multipack) NO. 101800.02


SECUPRO MAXISAFE with metal cap and hook blade 1 in single unit box (10 in multipack) NO. 101801.02


ALL VARIANTS

70 71

Application

In many ways the ideal solution.Optimize your workplace with the SECUPRO OPTISAFE. With its 4-edged blade and metal reinforced chin you can be sure of durability and efficiency. This cutter, with its double-sided slider, is suitable for both left and right-handed users, while its general shape and size promotes ergonomic handling for all. And its relatively small cutting depth? Might not be suit-able for cutting all types of materials, but is particularly capable of protecting your standard packaged goods.

SECUPRO OPTISAFENO. 100145.02

SECUPRO OPTISAFE 1 in single unit box (10 in multipack) NO. 100145.02



ALL VARIANTS

OPTIONAL BLADES


Technical features


PRODUCT DETAILS



Weight 53.2 g






ACCESSORIES

Worried about cutting your fingers? Put a cap on your fears.As you have surely already noticed, the SECUPRO LEWIS is different. But in a positive sense! Unlike with other cutters, the blade doesn‘t retract upon exiting the cutting material. Instead, a protective cap falls down in front of the blade, re-liably shielding you from any sharpness. Even if you keep the slider pressed down. As an added bonus, the SECUPRO LEWIS allows you to choose between two cutting depths.


SECUPRO LEWISNO. 710000.02

PRODUCT DETAILS



Weight 95.0 g


SECUPRO LEWIS 1 in single unit box (5 in multipack) NO. 710000.02

Installed blade: TRAPEZOID BLADE 0.63 mm, 10 in magazine NO. 41.50

ALL VARIANTS

Application





ACCESSORIES


Technical features

›› Further information from page 132 onwards.›› Further information from page 132 onwards.

72 73

SECUPRO PROSAFENO. 01152.02

Robust handleFor the most part, SECUPRO PROSAFE consists of aluminium, and is therefore very robust. You can use this cutting tool for all standard cutting applications, and also for cuts requiring the application of extra force.

Easy blade changeYou require no tools to change the blade. Simply these short instructions: press the ribbed surface of the blade cover downwards and then slide forwards. Removing the blade cover exposes the blade, leav-ing to free to either flip or change. Job done!

Double-sided bladeBefore you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECU-PRO PROSAFE will cut like new again.

Right and leftThe blade of the SECUPRO PROSAFE is activated by a flicking movement of the wrist. There is no slider and therefore it really doesn‘t matter whether you are left or right handed.

Wide blade slotThe blade retracts into the housing with the same flicking movement required for activation. You can be confident of the blade relia-bly disappearing, thanks to the wideness of the blade opening. Cutting material will not build-up and hinder blade retraction.

High performance with a flick of the wrist.The SECUPRO PROSAFE is a safety knife that likes to move. And achieve. With a controlled flick of the wrist you activate the blade. With a similar movement, one that automatically occurs when you pass the edge of the material being cut, the blade disappears. Get down to business and you‘ll learn all about this cutter‘s ability. Extremely stable, the SECUPRO PROSAFE moves through all standard cutting materials with ease – from cardboard to rubber, from leather to film.

Application

TRAPEZOID BLADE 0.63 mm, 1-sided ground-edge, 10 in dispenser NO. 5233.70

TRAPEZOID BLADE 0.63 mm, stainless, 10 in dispenser NO. 610.70

TRAPEZOID BLADE 0.63 mm, TiN-coated, 10 in dispenser NO. 8852.70

TRAPEZOID BLADE 0.63 mm, stainless, TiN-coated, 5 paper-wrapped NO. 852.42

TRAPEZOID BLADE 0.63 mm, rounded blade tips, deep-edged, 10 in dispenser NO. 65232.70

HOOK BLADE 0.63 mm, rounded blade tips, 10 in dispenser NO. 5634.70

OPTIONAL BLADES



Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 152.0 g



SECUNORM PROSAFE with trapezoid blade 1 in single unit box (5 in multipack) NO. 01152.02


SECUPRO PROSAFE with hook blade 1 in single unit box (5 in multipack) NO. 01156.02


ALL VARIANTS

74 75

SECUPRO CUT-O-MATICNO. 438.02

Particularly robustSomething you will auto-matically recognize with the SECUPRO CUT-O-MATIC is that it‘s been designed to meet the highest de-mands. With its solidly built handle, and protec-tive metal bracket, expect your cutting material to show this cutter respect.

Easy blade changeBlade change is so easy it won‘t bring you out of stride. Remove the screw at the front of the handle and swing back the protec-tive bracket. Carefully take out the hook and replace it with a new one.

Firm gripEven if you are wearing gloves, there is no slipping and wobbling involved with the SECUPRO CUT-O-MATIC. Its cleverly shaped, large handle fits perfectly in the hand. The protective cap which swings upwards when you cut has the sec-ondary purpose of providing extra stability whilst cutting.

The right cutYou only cut where the hook bites. Your goods are thereby protected. The protective metal bracket automatically falls down into place the moment you slip. This is not only good for you goods, but good for you!

For right and left handersWhether you are cutting, tearing or slabbing, the SECUPRO CUT-O-MATIC doesn‘t discriminate between right and left handers. So go ahead and be brave.

Safety, efficiency? It‘s all in the hook!This cutter, with its paper tearing hook, is all about...you guess it: paper! You wish to slab back the remaining layers of paper, left on a roll? Or you need to remove damaged layers? Let the SECUPRO CUT-O-MATIC be the answer to your needs. Its polished hook blade is perfectly capable of tearing through strong paper types. As an additional plus, cutting depth can be set by accordingly manipulating the screw found on the underside of the cutter body.

Application


Technical features




NO. 9845.06

ACCESSORIES

PRODUCT DETAILS



Weight 230.5 g



SECUPRO CUT-O-MATIC with 8 mm thick tearing hook 1 in single unit box NO. 438.02

Installed blade: HOOK BLADE 8.00 mm, 1 in pouch NO. 753.04

SECUPRO CUT-O-MATIC with 2 mm thick tearing hook 1 in single unit box NO. 439.02

Installed blade: HOOK BLADE 2.00 mm, 1 in pouch NO. 754.04

ALL VARIANTS


Automatic blade retraction

Thumbs up for a high degree of safety. As

soon as you start cutting, let go of the slider.

The blade will disappear into the handle the

moment it loses contact with the material

being cut.

SECU

NO

RM

78 79

SECUNORM 380NO. 380001.02

Long blade extensionWith a blade extension of exactly 7.8 cm, the word “long“ is somewhat an understatement. This cutter can be used to safely cut 4-ply cardboard, open sacks, separate paper sheets, slab rolls, carve building foam, slice polystyrene slabs…the list continues.

Tool-less blade changeTo change the blade, simply follow the arrow. Pressing down on the small blade change activator releases the capping end of the cutter, allowing it to swing downwards, and ultimately allowing you to remove the blade carrier and blade.

Ergonomic handleIt goes without saying, the more ergonomic the han-dle, the easier it is to cut. The SECUNORM 380 with its curved shape, carefully positioned soft-grip and ribbed slider, is an ergo-nomic dream.

Particularly robustThe core of this cutter is a particularly stable and abrasion resistant metal rail. The body of the cutter is made from a high grade plastic, capable of fulfilling high expectations.

For right and left handersRight and left handed users alike can be charmed by the new SECUNORM 380. Turn the blade 180° ac-cording to your preference and to suit your needs. The eyelet at the end of the cutter is also great for whenever you want to at-tach your SECUNORM 380.

Our world debut. For special demands.A long bladed safety knife? This has been a contradiction of terms for a very long time. Until now. The new SECUNORM 380 is the first safety knife worldwide featuring automatic blade retraction AND a blade extension length of almost 8 cm. If you are looking for a low risk alternative to the usual fixed blade cutter, here is your answer. As an additional safety feature, we‘ve included a transportation lock, to disable any unintended blade activity.

Application


Technical features





NO. 9845.06

ACCESSORIES

PRODUCT DETAILS



Weight 76.1 g



SECUNORM 380 1 in single unit box (10 in multipack) NO. 380001.02

Installed blade: STYROPOR BLADE 0.50 mm, 109.5 mm long, 10 in transparent packaging NO. 79.60

SECUNORM 380 with stainless steel blade 1 in single unit box (10 in multipack) NO. 380002.02

Installed blade: STYROPOR BLADE 0.50 mm, 109.5 mm long, stainless, 10 in transparent packaging NO. 179.60

SECUNORM 380 with thin blade 1 in single unit box (10 in multipack) NO. 380003.02


SECUNORM 380 with thin stainless steel blade 1 in single unit box (10 in multipack) NO. 380004.02


ALL VARIANTS


80 81

SECUNORM PROFI40NO. 119001.02

Long, stable bladeWhat does this cutter have over a standard version? The SECUNORM PROFI40 houses a blade that dis-tinguishes itself with its impartialness to snapping. Ideal e.g. for opening sacks and for cutting paper from the reel.

Abrasion resistantThe plastic insert of the SECUNORM PROFI40 slots into a fully aluminium body. With its robust design, this cutter can cope with high cutting frequencies over an extended period of time.

Tool-less blade changeBlade change is easy to understand. Easier still to perform. Simply push the plastic insert out of the handle and with care, replace the blade.

For right and left handersThe SECUNORM PROFI40 is the right size for every hand. Yours too. If you are a left hander, simply turn the blade 180° and your cutting tool is ready to use.

Deep cut. High quality.Just like the other PROFIs, SECUNORM PROFI40 is a professional cutting tool. Particularly when it comes to cutting open all differ-ent types of sacks. Some cutting tasks demand a decent blade length. And for these tasks especially, SECUNORM PROFI40 with its 40 mm blade length is your answer. The cutter is robust, the blade resistant to breakage. If you are a left hander, turn the blade 180° and you‘re ready to cut!

Application


Technical features





NO. 9845.06


SAFETY DEVICE NO. 9800.08

ACCESSORIES

PRODUCT DETAILS



Weight 82.0 g



SECUNORM PROFI40 1 in single unit box (10 in multipack) NO. 119001.02


SECUNORM PROFI40 with stainless steel blade 1 in single unit box (10 in multipack) NO. 119004.02


ALL VARIANTS

45°

82 83

SECUNORM PROFI25 1 in single unit box (10 in multipack) NO. 120001.02


SECUNORM PROFI25 with stainless steel blade 1 in single unit box (10 in multipack) NO. 120004.02


SECUNORM PROFI25 with rounded-tip blade 1 in single unit box (10 in multipack) NO. 120006.02


SECUNORM PROFI25NO. 120001.02

Robust handleThe plastic insert of the SECUNORM PROFI25 slots into a fully aluminium body. With its robust design, this cutter can cope with high cutting frequencies over an extended period of time.

Double-sided bladeBefore you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO PROFI25 will cut like new again.

Tool-less blade changeBlade change is easy to understand. Easier still to perform. Simply push the plastic insert out of the handle and with care, either rotate or replace the blade.

For right and left handersThe SECUNORM PROFI25 is the right size for every hand. Yours too. If you are a left hander, simply turn the blade 180° and your cutting tool is ready to use.

Professional in every respect.Our SECUNORM PROFI25 is aptly named. “PROFI“ because this cutter really does behave professionally. Whatever the situ-ation, whatever the cutting material. And the “25“ is in refer-ence to its impressive blade extension of 25 mm, with which even 3-ply cardboard can be conquered. And just like all other members of the PROFI family, SECUNORM PROFI25 features automatic blade retraction.

Application

HOOK BLADE 0.63 mm, 10 in dispenser NO. 98.70

OPTIONAL BLADES


Technical features





NO. 9845.06



ACCESSORIES

PRODUCT DETAILS



Weight 82.0 g



ALL VARIANTS

84 85

SECUNORM MULTISET with trapezoid blade 1 in single unit box (10 in multipack) NO. 118001.02


SECUPRO MULTISET with stainless steel trapezoid blade 1 in single unit box (10 in multipack) NO. 118004.02


SECUNORM MULTISET with rounded-tip trapezoid blade 1 in single unit box (10 in multipack) NO. 118006.02


SECUNORM MULTISET with a more slender trapezoid blade 1 in single unit box (10 in multipack) NO. 118003.02

Installed blade: TRAPEZOID BLADE 0.30 mm, 10 in dispenser NO. 609.70

SECUNORM MULTISET with hook blade 1 in single unit box (10 in multipack) NO. 118002.02


SECUNORM MULTISETNO. 118001.02

Flexible cutting depthWhat does the SECUNORM MULTISET have that other cutters don‘t? A locking screw with which you can adjust blade extension infinitely up to 25 mm! In other words, the SECU-NORM MULTISET can be easily and adapted to perfectly meet individual needs.

Abrasion resistantThe plastic insert of the SECUNORM MULTISET slots into a fully aluminium body. With its robust body and replaceable insert, this cutter can cope with high cutting frequencies over an extended period of time.

Double-sided bladeBefore you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUNORM MULTISET will cut like new again.

Tool-less blade changeReady, set, blade change! Changing the SECUNORM MULTISET blade is quickly done. Simply push the plas-tic insert out of the handle and either rotate or replace the blade.

For right and left handersThe SECUNORM MULTISET is the right size for every hand. Yours too. If you are a left hander, simply turn the blade 180° and your cutting tool is ready to use.

Many cutting tools in one.The SECUNORM MULTISET is a respected member of our leg-endary PROFI family. It adopted the name “MULTISET“ due to of its unique property: a multi-‘set-able‘ blade length. Ul-timately, it‘s up to you to decide how long the blade should extend: 5, 9, 14, 19, 25 mm, the options are multiple. De-pending on your needs, you can adjust the blade length. Your needs change? SECUNORM MULTISET can change with you!

Application


Technical features





NO. 9845.06



ACCESSORIES

PRODUCT DETAILS



Weight 82.0 g



ALL VARIANTS

86 87

SECUNORM PROFI LIGHTNO. 123001.02

No abrasionThe SECUNORM PROFI LIGHT is made of a par-ticularly abrasion resist-ant plastic. Stability and durability are the result of thoughtful design. Award-winning design, as a matter of fact.

At the press of a buttonChanging the blade is simple. Press the blade change button and pull the plastic insert out of the cutter body. Change the blade, job done!

Double-sided sliderWith the right hand? With the left hand? There‘s no need to ask this question! The SECUNORM PROFI LIGHT is fitted with a slider that‘s accessible from both sides. Choose for yourself!

Ergonomically lightThe SECUNORM PROFI LIGHT is ergonomically shaped, as are all members of the PROFI family. It is however the lightest of the group. With its 43 grams, this cutter is also ergonom-ically light, making high cutting frequencies easy.

Double-sided bladeBefore you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is dou-bled and fatigue is held at bay: with a simple flip of the blade, your SECUNORM PROFI LIGHT will cut like new again.

The particularly light heavyweight.The SECUNORM PROFI LIGHT is a PROFI off-spring. With its plastic body, it is lighter than the others by several grams. But as far as cutting ability is concerned, it‘s a heavyweight. You can use this cutter for almost all purposes. A relatively large blade length makes it suitable for cutting all common materi-als. For an indefinite number of cuts. And for special require-ments, considering the handle can accommodate various types of blades.

Application




TRAPEZOID BLADE 0.63 mm, 1-sided ground-edge, TiN-coated, 10 in dispenser NO. 85233.70


OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 43.3 g



ALL VARIANTS

SECUNORM PROFI LIGHT with trapezoid blade 1 in single unit box (10 in multipack) NO. 123001.02


SECUNORM PROFI with rounded-tip trapezoid blade 1 in single unit box (10 in multipack) NO. 123002.02


SECUNORM PROFI LIGHT with hook blade 1 in single unit box (10 in multipack) NO. 123003.02



45°

88 89

SECUNORM PROFINO. 07152.02

Ergonomic handleWhy has the SECUNORM PROFI been so popular for as long as we know? Because, for one, it sits comfortably and valuably in your hand. You can thus complete even demanding cutting work without any fatigue.

Hard to take upThe plastic insert of the SECUNORM PROFI is inside an aluminium handle. The stable design makes it ideal for high cutting frequencies and a long life.

2-cutting edge bladeBefore you have to change the quality blade, you can turn it over once. This doubles the usage time of the blade - and reduces your energy consumption. Because your product will cut again like new.

Without toolsYou can kiss goodbye to complex blade changes. In the truest sense of the word. You only have to push the plastic insert out of the handle and exchange the old blade for a new one.

Safe fitA SECUNORM PROFI will not let you down. But it can be hung down! Just pull the strap through the eyelet and let the cutting tool hang from your wrist or belt loop.

A classic. For right handed users.Do you sometimes wonder why we‘ve never bothered to update our SECUNORM PROFI? After all, it is four decades old! Well to be honest, it has never been necessary. Yesterday‘s pioneer is today‘s classic. A timeless shape, a robust form, a versatile ability: what more could you want? The “forefather“ of all of our TÜV-tested safety knives, the SECUNORM PROFI features automatic blade retraction and has therewith pro-tected generations of users.

Application







OPTIONAL BLADES


Technical features





NO. 9845.06



POCKET CLIP NO. 9853.08

ACCESSORIES

PRODUCT DETAILS



Weight 83.5 g



SECUNORM PROFI with trapezoid blade 1 in single unit box (10 in multipack) NO. 07152.02


SECUNORM PROFI with trapezoid blade and SAFETY DEVICE 1 in single unit box (10 in multipack) NO. 07116.02


SECUNORM PROFI with hook blade 1 in single unit box (10 in multipack) NO. 07156.02


ALL VARIANTS


90 91


To protect your goodsYou don‘t have to come too close to your goods with the shortened blade of the SECUNORM PROFI. You can concentrate fully on your work, without having to constantly look out for the cutting depth.

Ergonomic handleWhy has the SECUNORM PROFI been so popular over the years? Because it fits pleasantly in your hands. Even in the left hand. You can complete even the most demanding cutting jobs without getting tired.



Without toolsYou can kiss goodbye to complex blade changes. In the truest sense of the word. You only have to push the plastic insert out of the handle and ex-change the old blade for a new one.

A classic with a shorter blade extension. For right handed users.The SECUNORM PROFI is the “great grandfather“ of all our TÜV-certified safety knives. Once upon a time it was a pioneer. Today it is a classic. The SECUNORM PROFI with a smaller cutting depth is available for both left and right handers. But why the smaller cutting depth? With less blade, you can better protect your goods. Depending on which PROFI variant you choose, your cutting depth will be limited to 5, 7, 9, 10, 12 or 14 mm. The SECUNORM PROFI shown here features a 5 mm slider.

Application








OPTIONAL BLADES


Technical features





NO. 9845.06



POCKET CLIP NO. 9853.08

ACCESSORIES

PRODUCT DETAILS



Weight 82.5 g



SECUNORM PROFI with trapezoid blade and a cutting depth of 5 mm 1 in single unit box (10 in multipack) NO. 07105.02












SECUNORM PROFI with rounded-tip hook blade and a cutting depth of 2 mm 1 in single unit box (10 in multipack) NO. 07104.02

Installed blade: HOOK BLADE 0.63 mm, rounded blade tips, 10 in dispenser NO. 5634.70



ALL VARIANTS


92 93




TRAPEZOID BLADE 0.63 mm, stainless, TiN coated, 5 paper-wrapped NO. 852.42




Ergonomic handleWhy has the SECUNORM PROFI been so popular for as long as we know? Because, for one, it sits comfortably and valuably in your hand. You can thus complete even demanding cutting work without any fatigue.




Safe fitA SECUNORM PROFI will not let you down. But it can be hung down! Just pull the strap through the eyelet and let the cutting tool hang from your wrist or belt loop.

A classic. For left handed users.Do you sometimes wonder why we‘ve never bothered to update our SECUNORM PROFI? It is, after all four decades old! Well to be honest, it has never been necessary. Yesterday‘s pioneer is today‘s classic. A timeless shape, a robust form, a versatile ability: what more could you want? The “forefather“ of all of our TÜV-tested safety knives, the SECUNORM PROFI features automatic blade retraction and has therewith protected generations of users.

Application

OPTIONAL BLADES


Technical features





NO. 9845.06



ACCESSORIES

PRODUCT DETAILS



Weight 81.6 g



SECUNORM PROFI with trapezoid blade 1 in single unit box (10 in multipack) NO. 07252.02


SECUNORM PROFI with trapezoid blade and SAFETY DEVICE 1 in single unit box (10 in multipack) NO. 07216.02


SECUNORM PROFI with hook blade 1 in single unit box (10 in multipack) NO. 07256.02


ALL VARIANTS


94 95


To protect your goodsYou will not come too close to your goods with the shortened blade of the SECUNORM PROFI. You can therefore fully concentrate on your work without con-stantly having to look out for the cutting depth.

Ergonomic handleWhy has the SECUNORM PROFI been so popular so popular for as long as we know? Because, for one, it sits comfortably and valuably in your hand. You can thus complete even demanding cutting work without any fatigue.




A classic with a shorter blade extension. For left handed users.The SECUNORM PROFI is the “great grandfather“ of all our TÜV-tested safety knives. Once upon a time it was a pioneer. Today it is a classic. The SECUNORM PROFI with a smaller cutting depth is available for both left and right handers. But why the smaller cutting depth? With less blade, you can better protect your goods. Depending on which PROFI variant you choose, your cutting depth will be limited to 5, 7, 9, 10, 12 or 14 mm. The SECUNORM PROFI 07205 shown here features a 5 mm slider.

Application









OPTIONAL BLADES



Technical features





NO. 9845.06



ACCESSORIES

PRODUCT DETAILS



Weight 82.5 g



ALL VARIANTS

















45°

96 97

SECUNORM MIZARNO. 125001.02

Ergonomically shapedRight-handed? Left-hand-ed? It makes no difference with the SECUNORM MIZAR. Its ergonomically designed, lockable squeeze grip comfortably fits all hands. Making cutting super easy. Regardless of the number of cuts you make per day.

Plastic with a contentA glass fibre content, to be precise. These fibres are what make the SECUNORM MIZAR super strong and super solid. The durability of this cutter is remarkable.

Easy blade changeNo tools are needed to change the blade. Two hands can do the job. Move the 3-in-1 activator to posi-tion “blade change“. Swing out the lever, flip the blade cover, replace the blade. Close the cover, store the lever, continue cutting!

Multipurpose locking functionThe SECUNORM MIZAR 3-in-1 activator is unique. Slide it to lock and unlock your cutting tool. And when necessary, move it to position 3 to safely change or rotate the blade.

Double-sided bladeBefore you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is dou-bled and fatigue is held at bay: with a simple flip of the blade, your product will cut like new.

More leverage, more performance.The slimline SECUNORM MIZAR is your gateway into our world of quality squeeze cutters. Instead of a slider, a lever is re-sponsible for releasing the blade. Squeeze and cut. Thanks to a relatively large cutting depth, you can use this cutter to cut all common cutting materials. Efficiently. Its slender, no-fuss form, simultaneously allows a wide variety of cutting styles.

Application







OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS

Knife size (L x W x H) 139 x 15.6 x 50.5 mm


Weight 59.0 g



SECUNORM MIZAR 1 in single unit box (10 in multipack) NO. 125001.02


SECUNORM MIZAR with rounded-tip blade 1 in single unit box (10 in multipack) NO. 125002.02


ALL VARIANTS


98 99




NO. 9845.06




Ergonomic handleMARTOR wants to make your work easier for you, which is why we always have ergonomics in mind. With its small size and rounded off end, there‘s nothing uncomforta-ble about this cutter. A grooved slider offers grip for even better handling.

Easy blade changeOnce again we‘ve improved blade change. Simply press against the blade change button and pull to open the handle. The slider automat-ically folds up, revealing the blade. Rotate or change and continue cutting.

Double-sided sliderThe SECUNORM 175 is user friendly in the best sense of the word. And with its double sided slider, it is suitable for both, right and left handed users. No modification required.

Practical eyeletA cutting tool as handy as the SECUNORM 175 fits in your pocket. Mostly! To make your cutter available even faster, you can pull a strap through the eyelet. And hang it around your wrist, for example.

Surprisingly comfortable, incredibly capable.The SECUNORM 175 enriches our range of popular small box cutters. Its unique features include the cleverly-designed and incredibly easy blade change system. Other highlights include its ergonomic handle, double-sided slider and a fresh design. The SECUNORM 175 is a versatile cutting tool that apart from cardboard boxes, also masters bags, films and strappings.

Application


OPTIONAL BLADES


Technical features


ACCESSORIES

PRODUCT DETAILS

Knife size (L x W x H) 109.5 x 13.5 x 34 mm


Weight 31.0 g



SECUNORM 175 1 in single unit box (20 in multipack) NO. 175001.02


ALL VARIANTS

100 101




NO. 9845.06


SECUNORM HANDYNO. 445.02


Double-sided sliderWith the right hand? With the left hand? It’s all the same. We have fitted the SECUNORM HANDY with a slider that is accessible from both sides. Now that‘s handy!

Small, but robustDon‘t take this cutter at face value. It is small, but it is tough. The plastic insert sits snug within a coated metal handle. Light and compact, the SECU-NORM HANDY will guide you through thick and thin, long term.

Handy formatThe SECUNORM HANDY can slip into every pocket. For times when it‘s not in use. When in use, you will appreciate its lightness and size. Ribbing on the slider is a grippy bonus.

Tool-less blade changeChanging the blade is sim-ple. And tool-less. Simply pull the plastic insert out of the cutter body. Rotate or change the blade, replace the insert, job done!

A classic, in pocket form.The SECUNORM HANDY is compact, but don‘t be fooled! Being handy doesn’t mean it’s quaint. This is a cutting tool with “bite” and all the qualities required for the job. Compact yet versatile, lightweight but extremely handy, the SECUNORM HANDY is suitable for a variety of cutting applications. High frequency cutting is no problem.

Application


Technical features


ACCESSORIES

PRODUCT DETAILS


Main material Steel

Weight 35.0 g



SECUNORM HANDY 1 in single unit box (20 in multipack) NO. 445.02


SECUNORM HANDY with a stainless steel body 1 in single unit box (20 in multipack) NO. 444.02


SECUNORM HANDY with a stainless steel body and a stainless steel blade 1 in single unit box (20 in multipack) NO. 1444.02

Installed blade: INDUSTRIAL BLADE 0.30 mm, stainless, 10 in transparent packaging NO. 145.60

ALL VARIANTS

102 103




NO. 9845.06

SECUNORM SMARTCUT 1 in single unit box (20 in multipack) NO. 110000.02

SECUNORM SMARTCUT with stainless blade 1 in single unit box (20 in multipack) NO. 110100.02

Installed blade

SECUNORM SMARTCUTNO. 110000.02

One use, two advantagesThe SECUNORM SMARTCUT is a disposable cutter. For you, that means: no risk of injury when changing the blade. The blade will also not get lost in the produc-tion process.

Slider on both sidesWith the right hand? With the left hand? This question does not arise. Because we have fitted the SECUNORM SMARTCUT with a slider that is accessible from both sides. Choose for yourself!

Light and easyAt only 17 g, the SECU-NORM SMARTCUT is a genuine light weight. This also contributes to quick and efficient cutting. With-out hands and arms getting tired.

Perfect handlingThe product does not only look handy. Its small, rounded handle really does sit comfortably in your hand. And there’s much more: So that your thumb doesn’t slip, the slider has grooves.

You can’t lose itAs compact as the SECU-NORM SMARTCUT is - there is an eyelet for tethering the cutter to you or the work station.

Yes, a cutting tool can be this SMART.Make one cut with this knife and you‘ll know immediately why it‘s called a SMART cut. Its light and compact shape is SMART. The fact that it is suitable for almost all types of cutting mate-rial is SMART. Automatic blade retraction in such a small hous-ing is SMART. Its immense popularity as an attractive commer-cial cutter definitely proves its SMARTness.

Application


Technical features


PRODUCT DETAILS



Weight 17.2 g


ACCESSORIES

ALL VARIANTS

Installed blade


The stainless steel blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.63 mm.


104 105

SECUNORM GENIALNO. 04152.02

Easy blade changeThe SECUNORM GENIAL blade is so easy to change, it is genius. Open the blade cover, which acts as one half of a double-sided slider. Remove the old blade, and replace with a new. Close the blade cover. Finished!

For left and right handersCut with the left hand? Cut with the right? Don‘t worry! The two-sided slider ensures that both left and right handers can work with the SECUNORM GENIAL.

Robust designYou can feel the quality when you take the SECU-NORM GENIAL in your hands. No wonder, the handle is 100% aluminium. It also has a very stable design. You therefore benefit longer from it.

Ergonomically shapedHave you noticed that the SECUNORM GENIAL handle is especially curvy? It fits into your hands in the best possible way. Even if you have to wear protective gloves.

Small eyeletThe SECUNORM GENIAL eyelet is small, but fine. Pull a strap through it and attach your cutting tool however and wherever you want to, so that is it always handy.

A genteel cutter with a great shape.Do you wear protective gloves at work? Are you looking for a cutting tool that sits firmly and safely in a gloved hand? With a curved slider and an ergonomic shape, the SECUNORM GENIAL is what you‘re looking for. Cut multi-layer cardboard boxes, film, plastic strapping band, and much more, without your arm tiring and pace slowing. If necessary, feel free to mount a hook blade.

Application







OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 116.0 g



SECUNORM GENIAL with trapezoid blade 1 in single unit box (10 in multipack) NO. 04152.02


SECUNORM GENIAL with hook blade 1 in single unit box (10 in multipack) NO. 04156.02


ALL VARIANTS


106 107

SECUNORM MULTISAFE with trapezoid blade 1 in single unit box (10 in multipack) NO. 08152.02


SECUNORM MULTISAFENO. 08152.02

Robust designAs you can see and feel, the SECUNORM MULTISAFE is extremely stable. And flexible, since you can use a large number of blade shapes. The product is therefore suitable for many cutting applications.

Made of solid metalThe SECUNORM MULTISAFE is a tool that seems to be made of one casting. Zinc die casting, to be precise. For certain industries, e.g. the food industry, the product is also available unpainted.

Slide on topWith the right or with the left hand, you ask? Left and right, is the answer! The metal slider is on top of the handle. And can thus be easily used with either thumb.

2-cutting edge bladeBefore you have to change the quality blade, you can turn it over once. This doubles the usage time of the blade - and reduces your energy consumption. Because your SECUNORM MULTISAFE will cut again like new.

Eyelet for fasteningEven though the SECU-NORM MULTISAFE is now a classic - we had already introduced an eyelet for tethering your cutter to you or a work station.

Simply Heavy Metal.The SECUNORM MULTISAFE is a real classic that is now avail-able in a brand-new design. It provides excellent durability thanks to its handle made of zinc and its uncomplicated, robust design. With its notable blade extension, you can cut all standard materials. Should you have any particular requirements, you can re-fit the SECUNORM MULTISAFE with one of our many optional blades.

Application







OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS


Main material Zinc

Weight 174.0 g



ALL VARIANTS


108 109

SECUNORM REGELSAFENO. 14152.02

Robust designAs you can see and feel, the SECUNORM REGELSAFE is extremely stable. And flexible, since you can use a large number of blade shapes. The product is therefore suitable for any cutting application. Except power cuts.

Made of all metalThe SECUNORM REGELSAFE is a tool cast as one. Abra-sion resistant aluminium, to be precise. For certain industries, e.g. the food industry, this product also exists unpainted.

Slider on topWith the left hand or the right hand, you ask? With both! The metal slider is on top of the handle, and so can be easily used by both thumbs.

2-cutting edge bladesBefore you have to change the quality blade, you can turn it over once. This doubles the usage time of the blade - and reduces your energy consumption. Because your SECUNORM REGELSAFE will cut again like new.

Eyelet for fasteningEven in the case of a clas-sic such as the SECUNORM REGELSAFE you do not have to do without a practical eyelet. So that you can always attach your cutting tool easily and safely.

Completely metal. Completely reliable.The SECUNORM REGELSAFE is nothing less than its “heavy brother“, the SECUNORM MULTISAFE. It is just made of a light-er aluminium. The lighter weight knife ensures lower fatigue during frequent cutting throughout the shift. The slender and robust safety knife is also suitable for all the usual cutting materials. This is also because the dimensions of the blade extension are so generous.

Application




TRAPEZOID BLADE 0.45 mm, 5 paper-wrapped NO. 54045.42




OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 90.0 g



SECUNORM REGELSAFE with trapezoid blade 1 in single unit box (10 in multipack) NO. 14152.02


SECUNORM REGELSAFE with hook blade 1 in self-service pouch NO. 14156.01


ALL VARIANTS


110 111

SECUNORM POWERCUTNO. 02103.02

For high performanceWhy can you expect high performance from the SECUNORM POWERCUT? The design is massive, the plastic abrasion resistant, the handle ergonomic and reinforced with metal, that‘s why. It‘s guaranteed to be your best helper for all power cutting.

For right and left handersThe slider element is essentially fitted for right-handers. Neverthe-less, SECUNORM POWER-CUT can be easily adapted to suit left handers. All you need to do is loosen the screw holding the slider in place, remove the slider, and re-affix it on the op-posite side.

Double-sided bladeBefore you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fa-tigue is held at bay: with a simple flip of the blade, your SECUPRO POWERCUT will cut like new again.

Two blade thicknessesNeedless to say, the SECUNORM POWERCUT is fitted with a strong blade. Blade strength is of para-mount importance when it comes to cutting rubber slabs, thick films and multi- layered cardboard boxes. Choose between the 0,63 mm blade version and the 0,90 mm version.

Protected from explosionsImportant fact! If your SECUNORM POWERCUT falls to the floor, sparks will not fly. In certain industries – in the mining industry for example – this is not only regulation, but vital.

It‘s all in the name.Glance at the SECUNORM POWERCUT and you‘ll know directly what it‘s made for: power cutting! This tool can be fitted with various different 0.63 mm thick blades, enabling you to fully benefit from its power, regardless of cutting task. To minimise the force output required from the user himself, the cutter is designed to fit in your fist in the most ergonomically way possible. This makes cutting noticeably easier.

Application

TRAPEZOID BLADE 0.63 mm, 10 in dispenser NO. 61.70




HOOK BLADE 0.63 mm, Tungsten-alloyed steel, 10 in dispenser NO. 57.70




OPTIONAL BLADES


Technical features





NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 205.9 g



SECUNORM POWERCUT 1 in single unit box (5 in multipack) NO. 02103.02


SECUNORM POWERCUT with blade lock 1 in single unit box (5 in multipack) NO. 02101.02


SECUNORM POWERCUT with 0.90 mm thick blade 1 in single unit box (5 in multipack) NO. 02104.02

Installed blade: TRAPEZOID BLADE 0.90 mm, deep-edged, 10 in magazine NO. 61329.50

SECUNORM POWERCUT with 0.90 mm thick blade and blade lock 1 in single unit box (5 in multipack) NO. 02102.02

Installed blade: TRAPEZOID BLADE 0.90 mm, deep-edged, 10 in magazine NO. 61329.50

ALL VARIANTS (for 02103 + 02101)



112 113


Extra long handleWith the exact length of 100 cm it is guaranteed that you can always cut from a safe distance - without having to place your arm or head in the danger zone below the big bag. The eyelet can be used to fasten the knife.

Dirt resistantVery few people work in a sterile environment. No problem for the SECU-NORM 590. For example, the exchangeable dirt control device ensures that less dust and other foreign objects get into the cutting head.

Robust constructionThe middle element is made of stainless steel; all other components are made of a particularly hard plastic. Protection caps on the cutting head and stain-less secured screws also contribute to durability and high weather resistance.

Left and right handedWith the left hand or the right? Actually with both! You will need both hands to use the SECUNORM 590. Decide for yourself which hand to use to turn the blade-engaging element, and which hand to use for stabilising. A comfortable grip is the goal.

To cut like new againYour cutting tool will be ex-posed to extreme stress. It is, therefore, all the better that you can easily replace the key components. For example, the complete cutting head. Or just a part of it, such as the stainless steel blade or the dirt con-trol device.

A small step to achieve great things.Flexible big bags are increasingly used in various types of industries. Despite the many advantages, there is one main problem when working with flexible big bags: how cut open those heavy-weight bags without the contents spilling over you? The solution is... by using this innovation from MARTOR. The SECUNORM 590 is specifically designed for cutting big bags. Additionally, it has various thought-through features, such as the extra-long handle and the automatic blade retrac-tion. To help you work safely.

Application


Technical features


WALL MOUNT BRACKET SECUNORM 590

NO. 9596.06

HEXALOBULAR SCREWDRIVER SECUNORM 590

NO. 9594.06



NO. 9845.06

ACCESSORIES

PRODUCT DETAILS



Weight 939.0 g



STYROPOR BLADE 0.50 mm, 71.2 mm long, 10 in transparent packaging NO. 7940.60

OPTIONAL BLADES

SECUNORM 590 1 in single unit box NO. 590001.02


ALL VARIANTS


Our cutting tools are not only suitable for daily

use in the work place. They can be invaluable

in situations that we don‘t come across every

day. Traffic accidents, for example: our con-

cealed-blade SOS cutters can assist in cutting

safety belts and removing clothing.

SOS

CUTT

ER

116 117

SECUMAX SALVEX SOSNO. 538.02

Especially robustThe SECUMAX SALVEX consists of robust plastic and is therefore robust and up for the job. So you can always rely on it for emer-gencies. And that too, for a long time.

Hammer includedYour first-aid cutter will not even be stopped by safety glass. Use the integrated emergency hammer made of specially hardened steel to smash window and side panes.

4-cutting edge bladesSince the blade has four sharp edges, you can turn and turn it over several times. Thanks to the con-stantly “fresh“ blade, a perfectly functioning cut-ting tool is available to you in emergency situations.

For right and left handersThere are situations in which every second counts. That‘s why the SECUMAX SALVEX is always ready for use. The question of whether you are right or left handed does not arise, as it fits into any hand.

Eyelet and holderVery important: you have your first-aid cutter with you. Also important: you can always find it again quickly. That‘s why the SECUMAX SALVEX not only has an eyelet for attaching, but also a separate holder for the car.

First-aid cutter and hammer in one.In the event of an accident, it‘s paramount that you react quickly and calmly. An intuitively operable first-aid cutter with multiple uses can be a lifesaving tool. Use the SECUMAX SALVEX SOS to smash the side-window of a crumpled car. Use the concealed blade to cut through seat belts and other trapping materials, and finally, to quickly open clothing. Being able to help is a great thing!

Application






INDUSTRIAL BLADE 0.30 mm, stainless, cutting edges TiN-coated, 500 blades (each paper-wrapped) NO. 83630.35

OPTIONAL BLADES


Technical features




NO. 9845.06


ACCESSORIES

PRODUCT DETAILS



Weight 140.0 g



SECUMAX SALVEX SOS 1 in single unit box (10 in multipack) NO. 538.02


ALL VARIANTS



118 119

At your side in an emergency.Safety belts are important for survival. They can however be a hindrance in the aftermath of an accident. They can trap injured people in dangerous situations. The SECUMAX SOS-CUTTER provides the perfect solution. You can use it to reliably cut through any safety belt, whether as a doctor, paramedic or accident witness. The safety knife is also suit-able for cutting through clothing, which in some cases also has to be removed.

SECUMAX SOS-CUTTERNO. 537.00

PRODUCT DETAILS



Weight 27.5 g


Application


SECUMAX SOS-CUTTER 1 on self-service card (10 in multipack) NO. 537.00

ALL VARIANTS


Technical features


Installed blade

Cut quick. Help fast.The SECUMAX RUCK-ZUCK is not only a reliable helper in the workplace; it can be useful in many different situations. For example, it can be used to provide first aid in the event of a car accident. It‘ll cut swiftly through seat-belts, allowing you to free trapped victims. It‘ll cut open clothing, allowing you to quickly deal with injuries. To be prepared, make sure this cutting tool, in its accompanying case, is always at your side. And in your car.


SECUMAX RUCK-ZUCK SOSNO. 55337.02

PRODUCT DETAILS


Main material Glass fibre reinforced plastic

Weight 43.0 g


SECUMAX RUCK-ZUCK SOS 1 in single unit box (10 in multipack) NO. 55337.02






ALL VARIANTS

OPTIONAL BLADES

Application






ACCESSORIES


Technical features


Foreign particles in a production process? Scary

thought. In a food or medication production

process? Even more alarming. We‘re sure you

want to prevent this from happening. We

recommend the use of our metal detectable

safety knives to minimise the risks involves

with manual cutting work.

MD

P C

UTT

ER

122 123

SECUMAX 145 MDPNO. 145007.12

2 in 1 blade headThe blade head provides two functions: cutting and piercing. Use the knife‘s noses to the left and right of the blade to effortlessly pierce materials (e.g. card and film), and the blade head’s corners for packing tape.

Concealed bladeWith a 4 mm cutting ac-cess, the blade is highly concealed. Out of reach for fingers but accessible to the materials to be cut. And contents under the cutting surface will also be kept safe from contact with the cutting edge.

Stainless steel bladeStainless steel blades are standard in the SECUMAX 145 MDP – optimal for reg-ular use under demanding conditions and for cleaning with water.

Metal detectableYou are on the safe side when using the SECUMAX 145 MDP in areas requiring caution. The detectors are effective in the event that the disposable tool – or parts of it – unintention-ally enter the production process.

Flat and robust designIt is not just the handle that has an extremely flat de-sign – the cutting channel too measures just 1.5 mm. Less effort is required for cutting and the tool also re-tains its strength – thanks to a 0.5 mm blade and high-quality plastic.

Compact design. Powerful performance. Metal detectable.The SECUMAX 145 is our clever, compact safety knife for routine cutting tasks – also available in an MDP version. The metal-de-tectable plastic handle and 0.5 mm strong blade gives a robust-ness to the lightweight 14 g knife. Its concealed cutting edge easily copes with single-layered cardboard, film and packing tape and keeps your fingers safe. And because the SECUMAX 145 MDP is always traceable, your company is kept safe too.

Application


Technical features


PRODUCT DETAILS


Main material Metal detectable plastic

Weight 13.7 g

Weight per unit (10 in box) 150.5 g


BUSINESS CARD TEST CARD SET

NO. 9910.09

ACCESSORIES

SECUMAX 145 MDP 10 in box (loose) NO. 145007.12

ALL VARIANTS

Installed blade

The stainless steel blade is moulded into the body of the knife and cannot be changed. Blade thickness 0.50 mm.


45°

124 125




NO. 9845.06



NO. 9910.09

SECUMAX COMBI MDPNO. 109737.02

Can be metal detectableA cutting tool - or parts of it - could get lost while work-ing. But only for a short while. The metal detectable plastic ensures that you can find it again quickly.

With safetyThe concealed blade pro-tects you and your goods. The long, rounded nose also makes guiding along the material being cut eas-ier. It also makes cutting safe and precise.

4-cutting edge bladesHow do you increase the usage time of the blade? By using all four sharp edges the blade provides, one after the other. You can therefore ensure a constant high cutting quality with this tool.

Ergonomic handleThe best cutting tools adapt to human hands and not the other way round. The SECUMAX COMBI MDP handle has therefore been ergonomically shaped, which gives you pleasure in your work and allows you to work effectively.

Tool-less blade changeWhen the time comes, you can change your blade easily and safely. Manually loosen the screw holding the blade cover shut, open the cover and take out the blade. Rotate or replace the blade, and continue cutting.

Combines performance with safety. Metal detectable.The SECUMAX COMBI is a cutting tool with many excellent properties. The stainless steel MDP version in particular. Within the food industry in particular, metal detectable safety knives are a welcomed and increasingly stipulated invention. But even outside of the food industry, this cutter is ideal. Particularly for cutting stretch and shrink foil, bagged goods or plastic strapping band for example.

Application




OPTIONAL BLADES


Technical features


ACCESSORIES

PRODUCT DETAILS



Weight 55.0 g



SECUMAX COMBI MDP 1 in single unit box (10 in multipack) NO. 109737.02


SECUMAX COMBI MDP with safety screw 1 in single unit box (10 in multipack) NO. 109777.02


ALL VARIANTS

126 127


NO. 9910.09BUSINESS CARD TEST CARD SET

NO. 9910.09

Pokes its nose into everything. Metal detectable.The SECUMAX POLYCUT MDP is also one of our small, neat dis-posable cutters. Still, it does have a unique place in our prod-uct range. That‘s because its nose is extra long and pointed. Try opening a letter with it. Or cutting film in narrow slots. You will see: it will be extremely easy for you. Your company will be especially pleased that it is also made of plastic that can be traced by a metal detector and can therefore be found again.

SECUMAX POLYCUT MDPNO. 85007.08

PRODUCT DETAILS



Weight 9.8 g


Application

The stainless steel blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.30 mm.

SECUMAX POLYCUT MDP loose (50 in multipack) NO. 85007.08

ALL VARIANTS


Technical features


ACCESSORIES

Installed blade

Small, but nevertheless detectable.Work with a cutting tool and at the same time keep both hands free? Surely not possible you say. But it is! The SECUMAX RING KNIFE is worn on the top side of your finger. It can be used to cut film, yarn, thread and much much more. And if you drop it or lose it anytime, don‘t worry: it‘s made of a metal detectable plastic. Detectabilitiy minimises the risk of your cutter landing in your production line.

SECUMAX RING KNIFE MDPNO. 307.08

Application

PRODUCT DETAILS

Knife size (L x W x H) 34.3 x 23.2 x 18.4 mm


Weight 3.5 g



Technical features


ACCESSORIES

The stainless steel blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.30 mm

SECUMAX RING KNIFE MDP loose (50 in multipack) NO. 307.08

ALL VARIANTS

Installed blade›› Further information from page 131 onwards. ›› Further information from page 131 onwards.

128 129





BUSINESS CARD TEST CARD SET NO. 9910.09





BUSINESS CARD TEST CARD SET NO. 9910.09

Application

Professional in every respect. Metal detectable.Our SECUNORM PROFI25 is aptly named. “Profi“ because this cutter really does behave professionally. Whatever the situa-tion, whatever the cutting material. The “25“ is in reference to its impressive blade extension of 25 mm, with which even 3-ply cardboard can be cut. And finally, the “MDP“ tag means that all plastic parts of this cutter can be detected by a metal detector.

SECUNORM PROFI25 MDPNO. 120700.02

SECUNORM PROFI25 MDP 1 in single unit box (10 in multipack) NO. 120700.02


ALL VARIANTS


Technical features


PRODUCT DETAILS



Weight 84.5 g


ACCESSORIES

A classic, in pocket form. Metal detectable.Don‘t be deceived by the compactness of this cutter. The SECUNORM HANDY MDP might be small, but it surely can cut. It‘s a cutting tool with “bite“ and all the qualities required for the job. The MDP version is your first choice if you‘re coming from either the food or medicine industry. All plastic parts are made from a metal detectable plastic. Coupled with a stainless steel blade, there are no risks with the SECUNORM HANDY MDP.


SECUNORM HANDY MDPNO. 447.02

PRODUCT DETAILS



Weight 37.5 g


SECUNORM HANDY MDP 1 in single unit box (20 in multipack) NO. 447.02


ALL VARIANTS

Application

ACCESSORIES


Technical features

›› Further information from page 131 onwards. ›› Further information from page 131 onwards.

130



NO. 9910.09

131

Yes, a cutting tool can be this SMART. Metal detectable.Make one cut with this knife and you‘ll know immediately why it‘s called a SMART cut. Its light and compact shape is SMART. The fact that it is suitable for almost all types of cut-ting material is SMART. What‘s also smart, is that you can use it in sensitive industries without thinking twice. Because its plastic handle is metal detectable and it has a stainless steel blade. Good to know, isn‘t it?

SECUNORM SMARTCUT MDPNO. 110700.02

PRODUCT DETAILS



Weight 23.5 g


Application

The stainless steel blade cannot be changed. Blade thickness 0.63 mm

SECUNORM SMARTCUT MDP 1 in single unit box (20 in multipack) NO. 110700.02

ALL VARIANTS


Technical features


ACCESSORIES

Installed blade

Simulate external bodies. Increase safety.There are five cards with different plastic balls in the MDP TEST CARD SET - between 2.5 mm and 8 mm in size. You can reliably test the effective-ness of your metal detectors using the “Visiting card“. The difference between this and the acryl-ic card is that it is welded into a polythene bag and cannot be re-used so frequently.

BUSINESS CARD TEST CARD SETNO. 9910.09

PRODUCT DETAILS NR. 9910.09

Size (L x W x H) 101 x 68 x 0.5 mm


Weight 15.0 g

Weight per unit (polybag) 15.0 g


Accessories are your little assistants. In the

best sense of the word. Our accessories can

assist you to safely store your cutting tool. To

even better protect your fingers. Or to dispose

of your used blades in the best possible way.

ACC

ESSO

RIE

S

134 135

Application

Everything always at hand: BELT HOLSTER L.What do you do with your cutting tools when you are not actually using them? The MARTOR BELT HOLSTER L is a robust holder that allows you to carry all large MARTOR cutters as well as our safety scissors at all times. In addition, the interior and exterior pockets are designed to allow you to load diffe-rent tools: for example you can carry an extra cutter, a pen and a pack of blades. The MARTOR BELT HOLSTER is the ideal place to stow your tools safely when moving from A to B - and have them at hand, as soon as they are required.

BELT HOLSTER L WITH CLIPNO. 9922.08


Size (L x W x H) 215 x 68 x 40 mm

Main material Nylon

Weight 76.0 g


BELT HOLSTER M WITH CLIPNO. 9921.08

Everything always at hand: BELT HOLSTER M.The MARTOR BELT HOLSTER M is a robust holder that allows you to carry all midsize MARTOR cutters as well as our small scissors at all times. In addition, the interior and exterior pockets are designed to allow you to load different tools: for example you can carry an extra cutter, a pen and a pack of blades.

Application


Size (L x W x H) 215 x 60 x 28 mm

Main material Nylon

Weight 65.0 g


BELT HOLSTER S WITH CLIPNO. 9920.08

Everything always at hand: BELT HOLSTER S.The MARTOR BELT HOLSTER S is a robust holder that allows you to carry all compact MARTOR cutters as well as our small scissors at all times. In addition, the compartments are designed to allow you to load different tools: for example you can also carry a pen or a pack of blades.

Application


Size (L x W x H) 215 x 53 x 23 mm

Main material Nylon

Weight 57.0 g


Certified safety We always design our cutting tools to the high-est standards. So why should our accessories be anything less? Our MARTOR BELT HOLSTERS were therefore tested for harmful substances and stability - and were found to be very good.

Does it fit? Fits perfectly Our MARTOR BELT HOLSTERS S, M and L are precisely tailored for our cutters - and not just that. Depending on the size of the pocket, it allows you to carry a combination of various tools: cutter/pen cutter/scissors, cutter/cut-ter, cutter/pen/scissors etc.

Intelligent spacesaver With the MARTOR BELT HOLSTER you will always discover new storage op-tions. A compartment here, a slot there - all designed so precisely to ensure the contents are kept as firmly as necessary while offering you maximum flexibility.

2 attachment options The belt holster can be attached to your belt in two ways: by clip-on or velcro fastener. Velcro is recommended for belts; the clip can also be used on many other areas of your clothing, such as your trouser pocket.

Robust material The BELT HOLSTER is now an integral part of every-day working life. So there is no inconvenience. This is further guaranteed by its durable nylon material, washable at 40°C, which is held together by double seams - even when sub-ject to permanent use.




Suggested equipment:BELT HOLSTER L For example for- SECUPRO 625- SECUMAX 363

Suggested equipment:BELT HOLSTER S For example for- SECUNORM 380- SECUMAX 363

Suggested equipment:BELT HOLSTER M For example for- SECUPRO MARTEGO- SECUMAX 363

136 137

HOLSTERNO. 9843.08

For our wider cutting tools.Your cutting tool will feel comfortable in this ‘no-fuss‘ plastic HOLSTER. Attach it to your belt, or with a clip to your jeans pocket. This large black HOLSTER is suitable for storing the SECUPRO cut-ters MAXISAFE, OPTISAFE, PROSAFE and LEWIS, as well as the SECUNORM GENIAL.

Application



Size (L x W x H) 109 x 50 x 44 mm


Weight 28.6 g


HOLSTERNO. 9842.08

For our more slender cutting tools.This blue plastic HOLSTER is just like the black version, only smaller. Use it to safely store and transport SECUNORM cutters MULTISAFE, MULTI-SET, PROFI, PROFI LIGHT, PROFI25 and PROFI40. With this holster on your hip, your cutter will always be within grasping range.

Application



Size (L x W x H) 104 x 33 x 40 mm


Weight 24.0 g


Your personal used-blade bank.The SAFEBOX is large enough to store a large number of used blades safely. And at the same time, it is compact enough to carry with you. The two slits are not only used for filling, but also to “shorten“ your snap-off blades. When your SAFEBOX is full, empty it into your USED BLADE CONTAINER.

SAFEBOXNO. 108000.00


Application Size (L x W x H) 94 x 18 x 42 mm


Weight 33.6 g



For the final disposal of your blades.You can fill the USED BLADE CONTAINER with the content of your SAFEBOX. Or directly with your used blades. When the box is full, turn the lid until it shuts. Now the box cannot be reopened. The next step is to safely and completely dispose of the filled USED BLADE CONTAINER.

USED BLADE CONTAINERNO. 9810.08




Weight 260.0 g



Makes the USED BLADE CONTAINER accessible to all.Include it in your order now! With this mounting bracket you can fix your USED BLADE CONTAINER to a central location. Use the clamp and screws and nuts supplied with the product to attach it to either a pipe or a rod.

WALL MOUNT BRACKET USED BLADE CONTAINERNO. 9845.06




Weight 123.0 g



138 139

15 cutting tools. Convincing presentation.Whether you are a PPE distributor or safety officer, our MARTOR PRESENTATION KIT is designed to help you transport our cutting tools safely and present a convincing demonstration. Inside our BIG PPE PRESENTATION KIT, you will find 15 high-quality safety knives and scissors as well as various press releases and instructions at your fingertips.

PRESENTATION FOLDER PPE LARGE NO. 900958.08


Size (L x W x H) 335 x 267 x 60 mm

Main material Nylon

Weight 2400.0 g


PRESENTATION FOLDER PPE SMALL NO. 900957.08

13 cutting tools. Convincing presentation.Our MARTOR PRESENTATION KIT is designed to help you transport our cutting tools safely and present a convincing demonstration. Inside our SMALL PPE PRESENTATION KIT, you will find 13 high-quality safety knives and scissors as well as various press releases and instructions at your fingertips.



Size (L x W x H) 335 x 267 x 50 mm

Main material Nylon

Weight 2325.6 g


PRESENTATION FOLDER EMPTY NO. 900949.08

Flexible assortment. Convincing presentation. Our MARTOR PRESENTATION KIT is designed to help you transport our cutting tools safely and present a convincing demonstration. Our EMPTY PRESENTATION KIT invites you to select and place items inside according to your wishes - i.e. your preferred choice of our high-quality safety knives and scissors as well as the rele-vant MARTOR press releases and instructions.



Size (L x W x H) 335 x 267 x 17 mm

Main material Nylon

Weight 456.1 g



140 141

For the SECUMAX COMBI with a safety lock.Do all of your employees know how to safely change a blade? Have they had practice? Do they know when it is really necessary? A lack of knowledge can be both unsafe and unecono-mical. The SECUMAX COMBI is your alternative. Only those with a locking key have access to the blade and the right to either rotate or change.

LOCKING KEY EASYSAFENO. 9890.74

To lock your SECUMAX EASYSAFE.You can lock the blade change of your SECUMAX EASYSAFE using this accessory. Locking blade change has no influence on blade performance. It simply enables blade change to be controlled by giving the sole rights to the person holding the key. An additional safety measure for parti-cularly careful companies.

Application


PRODUCT DETAILS NO. 9890.74



Weight 1.0 g


LOCKING KEY COMBINO. 9855.74

Application



Knife size (L x W x H) 25.8 x 22 x 0.63 mm

Main material Metal

Weight 2.2 g


SAFETY DEVICENO. 9800.08

Blade change? Only the qualified.You can attach a U-shaped safety device to all SECUNORM PROFI cutters to prohibit blade change. When in place, the safety device can only be removed by leverage with a tool. The device works by disabling retraction of the plastic insert. Effectively hindering unqualified access to the blade.

Application

300% der Originalgröße




Weight 0.6 g


POCKET CLIPNO. 9853.08

SECUNORM PROFI‘s little partner.The pocket clip fits all right handed SECUNORM PROFI cutters. Just push the clip through the eyelet at the end of the handle. Use it to attach your cutter to your trouser pocket, for example.

Application





Weight 2.7 g


142 143

SAFETY FINGER CATCHNO. 103000.08

Danger! Hands off!Have you noticed the small holes in the middle body of the SECUMAX PLASTICUT and the SECUMAX CARDYCUT? The FINGER PROTECTION BRACKET fits exactly into these holes. Minimise the risk of your hand slipping whilst cutting and coming close to either the blade or the cutting material. Order it, fit it, and cut with confidence!

Application




Main material Metal

Weight 3.0 g


MATADORNO. 104000.08

Extend your cutting arm.Our small paper and film cutters are so handy they will delight you. But to further increase your cutting comfort, you can attach an ergo-nomically shaped additional handle. No tools are needed for attaching and detaching. The clasping function of the MATADOR is designed to perfectly fit your cutting tool. Stay safe, in-crease stability.

Application





Weight 20.0 g


HEXALOBULAR SCREWDRIVER SECUNORM 590NO. 9594.06

Doubly useful. For screws and caps.This offset screwdriver is a custom product for the SECUNORM 590. With the hexabular socket on the one side you can unscrew and tighten the secured screws of the cutting tool. The slot-ted screwdriver on the other side helps you to remove the protective caps.

Application




Main material Metal

Weight 8.6 g


WALL MOUNT BRACKET SECUNORM 590NO. 9596.06

And your tool is always ready to hand.The wall mount bracket is the ideal place to hang up your SECUNORM 590 safely at your workplace. Depending on the local conditions, you can attach the wall mount bracket to a sui-table wall using the enclosed screws and do-wels or attach it to a rod using a cable tie.

Application





Weight 27.0 g


144

MATRIX FOR CUTTING MATERIALS

SECUMAX ART.-NUMBER

CUTTING DEPTH

SECUMAX 350 350001 6

SECUMAX 150 150001 6

SECUMAX 145 145001 4

SECUMAX EASYSAFE

121001 7

SECUMAX COMBI

109137 3

SECUMAX COMBI

109237 3

SECUMAX NOVEX

539 6

SECUMAX OPTICUT 437 7

SECUMAX OPTICUT

436 7

SECUMAX SNITTY

43037 2

SECUMAX MOBILEX

45137 2-10

SECUMAX COUPPY

43136 3

SECUMAX ZEPHER 336 5

S. SHEETING CUTTER

335 3

SECUMAX POLYCUT

85000 3

SECUMAX PLASTICUT

3469 4

SECUMAX POLYPICK

469 4

SECUMAX CARDYCUT 7469 2

SECUMAX CARDYCUT

5469 2

SECUMAX TRENNEX

62000 3

SECUMAX VISICUT

470 4

Card

boar

d: 1

-ply

Card

boar

d: 2

-ply

Card

boar

d: 3

-ply

Card

boar

d: 4

-ply

Bag

ged

good

s

Wra

ppin

g, s

tret

ch, a

nd s

hrin

k fo

il

Slab

bing

mat

eria

l off

a r

oll

Tape

Pla

stic

str

appi

ng b

and

Yarn

, cor

d

Foam

, pol

ysty

rene

Laye

rs o

f fo

il or

pap

er

Text

ile, m

ater

ial

Coat

ed fi

lm

Lam

inat

ed fi

lm

Carp

et

Safe

ty b

elt

Leat

her

Rub

ber

Enve

lope

Flee

ce

Felt

PV

C

Self-

adhe

sve

labe

l

145


SECUPRO ART.-NUMBER

CUTTING DEPTH

SECUPRO 625 625001 21

SECUPRO MARTEGO

122001 9

SECUPRO MERAK 124001 9

SECUPRO MEGASAFE

116006 17

SECUPRO MAXISAFE

101806 16

SECUPRO MAXISAFE

101860 16

SECUPRO OPTISAFE

100145 10

SECUPRO LEWIS 710000 7+13

SECUPRO PROSAFE

01152 17

SECUPRO CUT-O-MATIC

438 27


SECUMAX ART.-NUMBER

CUTTING DEPTH

SECUMAX 565 565001 -

SECUMAX 564 564001 -

SECUMAX 363 363001-

SOS-CUTTER ART.-NUMBER

CUTTING DEPTH

SECUMAX SOS-CUTTER

537 3

SECUMAX RUCK-ZUCK SOS

55337 3

SECUMAX SALVEX SOS 538 6

SECUNORM ART.- NUMBER

CUTTING DEPTH

SECUNORM 380 380001 73

SECUNORM PROFI40

119001 36

SECUNORM PROFI25 120001 21

SECUNORM MULTISET

118001 1-21

SECUNORM PROFI LIGHT

123001 16

SECUNORM PROFI

07152 07252

20

SECUNORM PROFI

0710507205

5

SECUNORM MIZAR 125001 15

SECUNORM 175 175001 10

SECUNORM HANDY

445 9

SECUNORM SMARTCUT

110000 12

SECUNORM GENIAL

04152 15

SECUNORM MULTISAFE 08152 22

SECUNORM REGELSAFE

14152 20

SECUNORM POWERCUT

02103 17

SECUNORM 590 590001 24

Card

boar

d: 1

-ply

Card

boar

d: 2

-ply

Card

boar

d: 3

-ply

Card

boar

d: 4

-ply

Bag

ged

good

s

Wra

ppin

g, s

tret

ch, a

nd s

hrin

k fo

il

Slab

bing

mat

eria

l off

a r

oll

Tape

Pla

stic

str

appi

ng b

and

Yarn

, cor

d

Foam

, pol

ysty

rene

Laye

rs o

f fo

il or

pap

er

Text

ile, m

ater

ial

Coat

ed fi

lm

Lam

inat

ed fi

lm

Carp

et

Safe

ty b

elt

Leat

her

Rub

ber

Enve

lope

Flee

ce

Felt

PV

C

Self-

adhe

sve

labe

l

Card

boar

d: 1

-ply

Card

boar

d: 2

-ply

Card

boar

d: 3

-ply

Card

boar

d: 4

-ply

Bag

ged

good

s

Wra

ppin

g, s

tret

ch, a

nd s

hrin

k fo

il

Slab

bing

mat

eria

l off

a r

oll

Tape

Pla

stic

str

appi

ng b

and

Yarn

, cor

d

Foam

, pol

ysty

rene

Laye

rs o

f fo

il or

pap

er

Text

ile, m

ater

ial

Coat

ed fi

lm

Lam

inat

ed fi

lm

Carp

et

Safe

ty b

elt

Leat

her

Rub

ber

Enve

lope

Flee

ce

Felt

PV

C

Self-

adhe

sve

labe

l

147146

149148

BLADE MATRIX SECUNORM

852

8852

8523

3

8523

2

610

5233

5232 52

stai

nles

s, T

iN

TiN

5406

5

1-si

ded

grou

nd-e

dge

TiN

deep

-edg

ed, T

iN

stai

nles

s

1-si

ded

grou

nd-e

dge

0.63

mm

0.63

mm

0.63

mm

0.63

mm

0.63

mm

0.63

mm

0.63

mm

0.30

mm

0.50

mm

0.50

mm

51 53

5132

6523

2 99 199

609 54 61

6132

6132

9

6009

9 56

Wol

fram

deep

-edg

ed

deep

-edg

ed

deep

-edg

ed,

roun

ded

blad

e tip

s

deep

-edg

ed

deep

-edg

ed,

stai

nles

s0.

30 m

m

0.45

mm

deep

-edg

ed

deep

-edg

ed, 0

,90

mm

deep

-edg

ed,

roun

ded

blad

e tip

s

5805

00.

50 m

m

5806

5in

scrip

tion

„Tek

li“

55 7957 179

Wol

fram

5634

roun

ded

blad

e tip

s

98 58in

scrip

tion

„Tek

li“

63 60 45 145

stai

nles

s

7940

1794

0st

ainl

ess

stai

nles

s

SECUNORMART.-NUMBER

5404

5

0.63

mm

0.63

mm

0.63

mm

0.63

mm

0.63

mm

0.63

mm

SECUNORM GENIAL

SECUNORM HANDY

SECUNORM HANDY MDP

SECUNORM MIZAR

SECUNORM MULTISAFE

SECUNORM MULTISET

SECUNORM MULTISET

SECUNORMPOWERCUT

SECUNORMPOWERCUT

SECUNORMPROFI (right)


SECUNORMPROFI (left)


SECUNORMPROFI LIGHT

SECUNORMPROFI25

SECUNORMPROFI25 MDP

SECUNORMPROFI40

SECUNORMREGELSAFE

SECUNORM 175

SECUNORM 380

SECUNORM 590

04152

445

447

125001

08152

118001

118003

02101,02103

02102,02104

07105

07152

07205

07252

123001

120001

120700

119001

14152

175001

380001

590001

04152

445

447

125001

08152

118001

118003

02101, 02103

02102,02104

07105

07152

07205

07252

123001

120001

120700

119001

14152

175001

380001

590001

SECUNORM GENIAL

SECUNORM HANDY

SECUNORM HANDY MDP

SECUNORM MIZAR

SECUNORM MULTISAFE

SECUNORM MULTISET

SECUNORM MULTISET

SECUNORMPOWERCUT

SECUNORMPOWERCUT





SECUNORMPROFI LIGHT

SECUNORMPROFI25

SECUNORMPROFI25 MDP

SECUNORMPROFI40

SECUNORMREGELSAFE

SECUNORM 175

SECUNORM 380

SECUNORM 590

SECUNORM

>> only cutters with changeable blades and several blade options >> only cutters with changeable blades and several blade options

INSTALLED INSTALLEDOPTIONAL OPTIONAL

ART.- NUMBER

151150

BLADE MATRIX SECUPRO

deep

-edg

ed

deep

-edg

ed,

stai

nles

s0.

30 m

m

99 199

609

BLADE MATRIX SECUMAX

SECUMAXART.-NUMBER

109137

109237

109737

43136

121001

45137

539

436

437

55337

538

43037

0.63

mm

SECUPROART.-NUMBER

625001

438

122001

101806

101860

116006

116003

124001

100145

01152

SECUPRO 625

SECUPRO CUT-O-MATIC

SECUPRO MARTEGO

SECUPRO MAXISAFE

SECUPRO MAXISAFE

SECUPRO MEGASAFE

SECUPROMEGASAFE

SECUPROMERAK

SECUPROOPTISAFE

SECUPRO PROSAFE

SECUMAXCOMBI

SECUMAXCOMBI

SECUMAXCOMBI MDP

SECUMAXCOUPPY

SECUMAX EASYSAFE

SECUMAXMOBILEX

SECUMAXNOVEX

SECUMAXOPTICUT

SECUMAXOPTICUT

SECUMAXRUCK-ZUCK

SECUMAXSALVEX

SECUMAXSNITTY

92 192

stai

nles

s

0.40

mm

98

0.63

mm

6009

9de

ep-e

dged

,ro

unde

d bl

ade

tips

0.63

mm

45 145

stai

nles

s0.

30 m

m

SECUPROART.-NUMBER

45 145

stai

nles

s

3503

0 0

.30

mm

1361

5st

ainl

ess,

0.1

5 m

m

1363

0st

ainl

ess,

0.3

0 m

m

3601

0 0

.10

mm

3601

3 0

.13

mm

3601

5 0

.15

mm

3603

00.

30 m

m

3604

0de

ep-e

dged

, 0.4

0 m

m

3602

00.

20 m

m

8361

5st

ainl

ess,

TiN

, 0.1

5 m

m

8363

0st

ainl

ess,

TiN

, 0.3

0 m

m

0.30

mm

0.2

0 m

m

0.10

mm

stai

nles

s, 0

.30

mm

3702

0

3701

0

1373

0

stai

nles

s, T

iN, 0

.30

mm

8373

0

stai

nles

s, 0

.15

mm

deep

-edg

ed,

0.40

m

m83

715

3704

0

0.3

0 m

m37

030

852

8852

8523

3

610

5233

5232 52

5406

5

stai

nles

s, T

iN TiN

1-si

ded

grou

nd-e

dge,

Ti

Nst

ainl

ess

1-si

ded

grou

nd-e

dge

56

6523

21-

side

d gr

ound

-edg

e,ro

unde

d bl

ade

tips

0.63

mm

5805

0

5634

5806

5

0.50

mm

roun

ded

blad

e tip

s

0.63

mm

deep

-edg

ed

0.63

mm

0.63

mm

>> only cutters with changeable blades and several blade options

>> only cutters with changeable blades and several blade options

INSTALLED INSTALLEDOPTIONAL OPTIONAL

753

754

8 m

m

2 m

m

SPECIAL TERMS IN THE MARTOR WORLD.FOR A BETTER UNDERSTANDING.

We want you to use our products safely and efficiently. An important prerequisite is to under-stand us and our cutting tools. For convenient and easy guidance, we have compiled a glos-sary for you. Here you will find explanations for all special terms we use.

Adhesive tape removerSome of our cutting tools have an additional adhesive tape remover. Examples: In the SECUMAX COMBI it is a small metal plate integrated into the handle. In the SECUMAX 150, the two outer edges of the scraper area serve this purpose.

Automatic blade retractionThe blade retracts into the handle as soon as it leaves the cutting mate-rial. Condition: the slider is not held tight. Safety knives with automatic blade retraction are called SECUNORM …

Blade accessBlade access in our safety knives with concealed blades determines the gap between handle and nose. It is always narrow enough for your finger not to pass through but also wide enough to be able to work on certain cutting materials.

Blade carrierThe blade is fixed by the blade carrier so that it does not slip. The blade carrier has one or several cams. These fit exactly into the respective blade.

Blade categoryWe call a specific superordinate group of blades a blade category. The designation takes place according to the shape (e.g. trapezium blade, hooked blade etc.), area of use (e.g. industrial blade) or function (e.g. scraper blade, deburring blade).

Blade change buttonIn certain safety knives you can press or pull a blade changing button to start blade changing.

Blade changing deviceIf the safety knife does not have a button, but another device to change the blade, we talk of - in more general terms - a blade changer.

Blade coverThe blade cover is the small plate on which the blade lies. It holds the blade together with the blade carrier. In many of our cutting tools, you have to lift up the blade cover to change the blade.

Blade extensionThe blade extension indicates the maximum length of the blade outside the handle and is usually larger than the cutting depth.

Blade lockExample: SECUNORM POWERCUT. It has a sliding device with which you can fix the blade when it is fully extended.

Blade slotThe blade slot is at the front of the handle. The blade extends outside the handle here and gets back in again.

Blade with 1 cutting edge/2 cutting edgesDepending on whether the blade has 1 or 2 cutting edges, we talk of a blade with 1 cutting edge or 2 cutting edges.

ComfortThe useful properties of a cutting tool, such as its ergonomic shape or the easy and safe blade change increase your comfort when using it.

Concealed bladeThe cutting tool is designed in such a way that the blade is shielded out-wardly. The result: a maximum degree of safety for the user. Safety kni-ves with concealed blades are called SECUMAX …

Cutting depthThe cutting depth determines how deep the blade can penetrate into the cutting material. Since the cutting depth also depends on the cutting angle, it is usually lower than the blade extension.

Cutting edgeWe call the sharpened part of the blade the cutting edge. If we only mean the front pointed piece, we talk of the blade tip.

Cutting edgesExample SECUMAX 150: If the blade is interrupted in the middle, depend-ing on the design, and if two cutting areas are formed because of it, we describe this as cutting edges.

Cutting materialYou will work on the cutting material with your cutting tool. Whatever you can cut particularly well with it comes under “main cutting materials“, which could be single or multi-layered cardboard boxes, for example, plastic hoops or certain types of film.

A › B B › C C › F F › N

Cutting solutionsTogether, our products, performance and services provide the guarantee for safe cutting solutions. Our solutions are always customised to a spe-cific “cutting problem“ for you locally, e.g. specific cutting work, a certain cutting environment and/or a special cutting material.

Cutting typesIn the type of cut, we describe how or for what users use their cutting tool. Examples are: cutting with tension, cutting under pressure, forceful cut or saw cut. The type of cut can also describe the result of cutting, for example, “window cut“ or “removing the cover.“

Cutting workWe call what you use our cutting tools for “cutting work.“

Disposable cutterChanging blades is not possible with our disposable cutters. You can just dispose of them through the scrap waste system after use.

Easier and safer blade changingMost of our cutting tools are re-usable cutters. We have made blade changing as easy and safe as possible, so that you will not hurt yourself while doing so. And so that no blades get lost while changing them.

Ergonomic shapeIf a cutting tool has been designed so that it is especially pleasant to hold it, we describe it as having an “ergonomic shape“ or being “ergonomically shaped.“

EyeletThe eyelet is at the back of the handle. You can pull a strap through it to attach your cutting tool.

Fixing screwExample SECUNORM MULTISET: You can vary the cutting depth adjustment with the fixing screw.

For right and left handersIf a cutter can be used just as well by right and left handers, we highlight it in the form mentioned.

Fully automatic blade protection capSECUPRO LEWIS is a special case: the blade does not retract after cutting. Still, you benefit from a high degree of safety. Because instead, a blade protection cap snaps into place in front of the blade as soon as it leaves the cutting material, without you having to do anything else.

Fully automatic blade retraction.The blade retracts into the handle as soon as it leaves the cutting material - even if the slider (or lever) is held tight. Safety knives with fully automa-tic blade retraction are called SECUPRO…

Fully automatic protective bracketSpecial case: SECUPRO CUT-O-MATIC: as soon as you have finished cut-ting, a protective bracket opens up in front of the paper tearing hook and makes it harmless. It is fully automatic because this happens without you doing anything.

HandleThe handle is the main component of our cutting tools. The slider, lever, buttons etc. can be found on the handle. The blade or the mechanism that pulls back the blade are concealed in the handle.

Installed bladeThe blade with which the cutting tool is normally supplied is the installed blade.

LeverThe blade in our double lock cutters is not released by a slider but by a lever. You have to operate the lever in the lower handle area for this purpose.

Manual blade retractionTo “defuse“ your cutting tool, you have to pull the blade back into the handle yourself after cutting. This safety technology doesn‘t exist in our safety knives.

NoseYou will only find a nose with a concealed blade in our safety knives. It shields the blade together with the handle. The nose is usually pointed at the front to make piercing easier for you.

161160

SPECIAL TERMS IN THE MARTOR WORLD.FOR A BETTER UNDERSTANDING.

O › P P › S S › Z 1 › 3

Promotional knivesThere is also a promotional knife variant of many of our cutting tools. In-other words, without a MARTOR logo but with space for your logo or your claim. A premium give-a-way for your customers, friends and partners with a high user value and a long life. Ask us for special colours and other specific designs.

Quality bladeAll MARTOR blades are quality blades. Still, there are differences here, which we will tell you about personally, e.g. stainless steel or TiN-coated.

Safety catchThe safety catch prevents the blade from driving out of the handle unin-tended. Releasing the blade is usually done with the same element.

Safety knivesEven if we have other high quality cutting tools in our product range: safety knives are our core competence. They are called safety knives because they have a reliable safety technology: the automatic and fully automatic blade retraction and the concealed blade. By using our safety knives the number of cut injuries can be clearly reduced at any work place.

Safety levelWe differentiate between four safety levels: simple safety (manual blade retraction), a high degree of safety (automatic blade retraction), a very high degree of safety (fully automatic blade retraction) and maximum safety (concealed blade).

Safety technologyOur safety technology means: manual blade retraction (only in non-safety knives), automatic blade retraction, fully automatic blade retraction and the concealed blade.

SliderMost of our safety knives with automatic or fully automatic blade retrac-tion are fitted with a slider. By pressing the slider to the front, you can release the blade.

Sliding baseIn some of our safety knives with concealed blades, the handle leads into a sliding base. As the name suggests, the bottom of the base slides smoothly over the cutting base. At the same time, the cutting material is lead to the blade over the top of the sliding base.

Soft gripWe describe the soft plastic layer that makes a handle particularly resistant to slipping a soft grip.

Squeeze lever knifeCurrent examples: SECUPRO 625, SECUPRO MARTEGO, SECUPRO MERAK and SECUNORM MIZAR. All these cutting tools belong to the young pro-duct family of innovative squeeze lever knives. As with tongs, you will find an easily movable lever at the bottom of their handles. You can re-lease the blade very comfortably with it.

TiN-coatedTiN stands for titanium nitride, a chemical compound comprising titanium and nitrogen. This material is known for its extreme hardness and corro-sion resistance. Our TiN-coated blades are therefore subject to less wear and have a longer service life with a constant high-level of sharpness.

Used blade containerYou will find two different storage containers in our range of accessories, the SAFEBOX and the SAMMELBOX with which you can safely dispose of your used blades.

UserWe like to call anyone working with our cutting tools a “user“.

Wall strengthSome of our paper and film cutters are so delicate that we do not talk of “width“ when talking about dimensions. Instead, we indicate the wall thickness, which is 2 or 3 mm, for example - the perfect solution for cut-ting in narrow slots and narrow spaces in between.

2-cutting edge/4 cutting edge bladesIf you can turn the blade around and use it many times, we call it a 2-cutting or 4 cutting edge blade.

3-in-1 blade headExample SECUMAX 150: It has a separate blade head, suitable for three different uses: cutting, scraping, tearing open.

3-in-1 safety lockExample SECUNORM MIZAR: This double lock cutter has a unique 3 in 1 safety catch. You cannot only lock and unlock the blade with it, but also introduce safe blade changing.

One sided/double sided cutDepending on whether the cutting edge is only sharpened on one side or on both sides, we describe it as a one sided or double sided edge.

Optional bladeYou can fit almost all our safety knives (that are not disposable cutters) with an alternative blade according to requirement. This optional blade can be a hooked blade, for example (instead of the fitted trapezium bla-de). It can also be stainless steel or TiN-coated. Or it will have rounded off corners or blunt tips. Considering the approx. 200 blades in our product range, this is only a small selection of possible variants.

Plastic insertExample, SECUNORM PROFI or SECUNORM HANDY: the complete inside part of a cutting tool that you have to pull out for blade change. We call it a plastic insert.

Plastic springIn certain safety knives, the plastic spring is attached directly to the hand-le with a concealed blade and protrudes from that point into the area of the blade access. Your job: to keep the cutting material pressed down and to guide it to the blade in this way without jamming and buckling.

Product categoryWe call a specific superordinate group of cutting tools, product category. We have three of these: 1. Safety knives, 2. Cutter (fixed cutters, snap-off blade cutters), 3. Special cutters (scalpels, deburring cutters, scrapers, etc.).

Product familyWe call a sub-group of cutting tools connecting a certain characteristic, a product family. These can also be found in various product categories. Examples are: MDP cutters, disposable cutters, promotional knives, snap-off blade cutters, double lock cutters etc.

Product rangeAll the products combined (cutting tools, blades, accessories) form our product range.

ProductivityThe better (faster, safer, more precisely), users cut and the less often they hurt themselves while doing so, the higher their productivity. The compa-ny as a whole also benefits from it.

163162

›› Here you‘ll find the legend

with our pictograms.

Please open!

Technical features

Maximum safety

Cutting depth

Very ergonomic

High safety

Adjustable extend-ed blade length

Extended blade length

Tool-less blade change

For left hander

Very high safety

Abrasion resistant

Metal detectable

Heavy-du ty

Very abrasion resistant

Blade change with tool

Fully metal housing

Pre ci sion cutt ing

Soft-grip

For right hander

Ergonomic

Adjustable cutting depth

Safety lock

Round tipped trapeze blade

For right and left hander

Cutting edge length

Safer blade change (with magnet)


Cardboard: 1-ply

Tape

Foam, polystyrene

Cardboard: up to 3-ply

Wrapping, stretch, and shrink foil

Plastic strapping band


Slabbing material off a roll

Yarn, cord

Bagged goods

Layers of foil or paper

Textile, material

AccessoriesUsed blades box

Belt holster M

Locking key COMBI

Used blades container

Safety device

Belt holster S

Pocket clip

Rubber

Carpet

Felt

Coated film

Envelope

PVC

Laminated film

Fleece

Safety belt

Finger catch

Locking key EASYSAFE


Leather

Non-corrosive

Tape splitter

Lanyard hole

Scrape width

Printable for pro-motional purposes

Spare blades in knife body

OUR PICTOGRAMS.ALL FEATURES AT A GLANCE.

Our pictogram system helps you to orien-tate yourself quickly, to compare products comfortably and to see the features which are useful for your cutting application at first glance.

TECHNICAL FEATURES Your safetyA glance at the icon is enough for you to know whether your cutting tool stands for maximum safety, a very high degree of safety or high safety. We like to compare our safety technologies with a protective shield.

All about handlesErgonomically shaped? With a soft grip for an even better hold? For right and left hander? Made of metal? Or plastic that can be metal detected? All this and much further information you will find on these pictograms.

All about bladesIs a blade change possible? And, if so, with or without a tool? How large is the blade extension? And how deep does the blade cut? It sometimes depends on every millimeter here. So take a good look!

MAIN CUTTING MATERIALS

Which product is best for which kind of material? Even if many of our safety knives are multi-talented, there are also small but subtle differ-ences. These icons will assist you when searching for the best possible cutting solution.

ACCESSORIES

Everything that makes your work easier is valuable. From belt holster to locking key to used blade container. Here you can find the relevant accessories for each product.

Disposable knife4-times us able blade

2-times us able blade

Belt holster L

MDP-test cards Handle extension

Plastic burr

TIN-coated

Hexalobular screwdriver

for SECUNORM 590

Wall mount bracketfor SECUNORM 590

Documents

SAFETY KNIVES AND SCISSORS ›› You can view the 2016/2017binisas.com/wp-content/uploads/2017/01/MARTOR-sito-2016_2017.pdf · martor is the leading international partner for innovative