Safety Rules of Contract

8/3/2019 Safety Rules of Contract

1/7

GOVERNMENT OF INDIA

MINISTRY OF DEFENCEGUN & SHELL FACTORY, COSSIPORE, KOLKATA-700002

1. SAFETY CONDITION OF CONTRACTThe following Safety conditions / requirement will form an integral part of tender enquiry / contract.

The contractor is required to abide by the same failing which Rs. 5000/- will be deducted from firms

bill towards penalty.

1. Work should be carried out with utmost care & work permit system has to be followed. The jobshould also be carried out under strict supervision of an experienced person, well conversant with

the work and the use of proper PPEs.

2. Workers are trained in the use of Safety equipments & basic Safety & are properly supervised.3. Inspection & proper maintenance of Safety equipments are undertaken regularly.4. Before starting of work at height, the entire safety requirement (like use of Safety belts / fall body

harness, lifeline protection, helmets and safety nets etc.) shall be decided as per the need of the

area / site by the executing agency in consultation with safety officer and the contractor where

applicable.

5. The work planning may be done in advance and necessary safety gadgets, lifeline etc. may be fixedat site.

6. Before commencement of work all workers shall be given a safety talk by giving a details of workplanned as at l. no. 5

7. Medical Examination of the worker: Every worker to be deployed for working height shall beexamined for physical and mental fitness and to be certified by a registered medical practitioner atleast once in six months. The fitness will include freedom from (a) epilepsy (b) High BP (c) Obesity

(d) Vertigo etc. along with general fitness and also fairly good eyesight. This MC in r/o each worker

shall be made available for inspection.

8. Post training certification (in case of contractors Laborer): After successful completion of trainingand tests, the workers should be issued a height pass which shall be valid for a maximum period of

one year. On expiry it shall be renewed after the worker passes the tests once again. (Format II).

9. Workers should be conversant with the use of fall. Arrester, life line, shock absorber retraceablefall arrestor, safety wok ladder, duck ladder crawling board etc. The work of fixing safety net be

carried out by experienced riggers and precaution be taken so that net is fixed to a structural

member sufficiently strong to bear one ton load and on sagging under the load of fall the net

should not strike a machine structure, part of building or crane etc.

10.Each worker should keep one lifeline always intact and use preferable two lifelines to avoid andrisk to life due to failure on one. Each life line should be strong enough to bear the shock load due

to fall.

11.Use of hydraulic / power elevators if used should be known to supervisor & worker.12.Use of helmet, proper shoes and other PPEs like safety belts, lifelines with shock absorber, full

body harness etc. is necessary to prevent a fall and to reduce severity of injuries consequent to it

in case of an accident. PPEs and other safety equipment should be provided as per the

recommendation of Safety Officer / site Engineers. Use of retractable fall arrester can eliminate

almost all risks and dangers of fall down.


2/7

13.Examination of PPEs & gadgets e.g. fall arrestor, safety belts, full body Harness and safe workladders etc will be done in presence of safety Officer at least once in six month.

14.Each ladder should have a nylon rope for tying on top and bottom with suitable self locking hookskarabiner screws, rings etc.

15. If situation permits the use of fall arrester and shock absorber can be made taking lifeline from afirm structure / structural member of suitable strength of by tying rope of web of adequate

strength with for this purpose.

16.A safety net of suitable strength below he working area should invariably be fixed to cover 2.5meters all round the work area to arrest a fall. The fixing of such a net should be carried out by

experienced riggers and precautions be taken to have minimum distance of fall and that the likelysag of safety net will boot cause collision with any plant or machine or a part thereof cranes,

structure etc.

17.Safety net should be used wherever considered necessary and feasible by the executing officerand Safety Officer.

18.Before staring the days work the site should be inspected for ensuring compliance of all safetyinstruction, regulations and other aspects. After ensuring the compliance, the contractor ( when

engaged ) the site engineer / site in charge / executing officer and the safety officer will sign the

relevant documents before giving clearance for starting the work In the event of discontinuation

work and before restarting the site inspection shall be redone on the same lines. These

documents shall be enclosed with firm bill otherwise no bill will be entertained for payment.

19.Use of anchor plates to fix the lifeline etc should be done wherever necessary / feasible.20. In case the site condition demands, a safety net may be fixed firmly the fragile roof with the helpof J bolts and this may be used for taking a lifeline. In case there is any problem in getting a life

line otherwise, this may also be used for walking for the purpose of repair to be carried out on a

fragile roof with the safe work ladder and crawling board depending upon site condition. Proper

training for the above should be imparted to a workers working on fragile roof and un any case

fragile roof should not be relied upon for taking load unless proved otherwise. Safety net should

be avoided as far as possible and full body harness should be used to avoid problem during the

rescue operation.


3/7


4/7


5/7


6/7


7/7

2. QUERIS / CLARIFICATION:Queries/Clarifications of all nature, if any that may arise should be referred by the tenderer by

Telex/ Cable/ Letter direct to the signatory at the following Address:

GENERAL MANAGER

GUN AND SHELL FACTORY

COSSIPORE, KOLKATA 700002. (INDIA)

Phone No. : ( 033) 25579684, 2557 4423, 25574284, Ext. 226, 281.

Fax No. : (033) 2557 4390.

3. ALL TENDERERS ARE REQUESTED TO TAKE SPECIAL NOTE OF THE ABOVE INSTRUCTION ANDOBSERVE THE SAME STRICTLY. NON ADHERENCE / COMPLIANCE OF THE CLAUSE/SUB-CLAUSE

ABOVE IS LIABLE TO DISQUALIFY THE TENDERER.

Documents

Safety Rules of Contract