6
Are hotel guest complaints and door damage caused by doors hitting a privacy guard a problem? View video demonstration online at http://dhsi-seal.com/securelatch.htm ACTIVE LINK ACTIVE LINK ACTIVE LINK ACTIVE LINK SAL-3-w copyright DHSI 17 Silver Street, Rochester, New York 14611 TEL (585) 235-8543 FAX (585) 235-0431 Website: dhsi-seal.com e-mail: [email protected] Contact Person: Robert Rissone, President D H S I OOR AND ARDWARE YSTEMS, NC. #SAL "Secur-A-Latch" Privacy Keeper PATENT #6,244,636 © Makes a door code compliant - for fire code and ADA Can't prop door open - for NFPA 80 code compliance Touch to Engage - Touch to Release for ADA Quietly Disengages- If guests try to prop door open No damage to door face or edge, or adjacent closet doors Available in various Architectural Finishes: US3, US4, US10, US10B, US14, US15, US17A, US26, US26D Consult DHSI for convenient bypass operation for emergency ingress. Emergency Bypass satisfies Life Safety Rare earth magnet eliminates re-locking from vibration Self-Adhesive Decals available to cover existing holes Use in preschool, daycare, etc for unwanted exit. Code compliant hold-open option for unoccupied rooms #SAL x Finish Lifetime non-corrosive spring ensures permanent return Lifetime magnet ensures ensures permanent holding Highest level of assurance for safety and eliminates lockouts the original innovator door frame wall "Touch to engage" © Magnet holds "SAL" in locked position. Prevents door from opening. frame wall Spring holds "SAL" in unlocked position Push to engage and secure. door "Secur-A-Latch" eliminates door damage, edge guards, noise complaints, adjustments and is CODE COMPLIANT. Viewed From Inside Room Eliminate the swing bar door guard "Touch to release" © to disengage magnet. Also disengages quietly upon door closing. Spring resets "SAL". DISENGAGED AUTO-RELEASE door frame wall ENGAGED - the biggest "problem product" in the industry: The Conventional Swing Bar door guard is not compliant per NFPA 80. This applies to new and existing openings. Use the #SAL instead! Specify with DHSI Patented "Cush 'N' Seal" Frame Seals, Door Bottoms, Transitions, DVC and CNB! Return to DHSI brochure home page at http://dhsi-seal.com/brochure.htm ACTIVE LINK ACTIVE LINK ACTIVE LINK ACTIVE LINK

#SAL Secur-A-Latch Privacy Keeper PATENT - Hardwaredhsi-seal.com › pdf › SAL-Secur-A-Latch-info-1.pdf#SAL-PAD "Secur-A-Latch" Cush Pad #SAL-PAD is optional only. Under normal use

  • Upload
    others

  • View
    16

  • Download
    0

Embed Size (px)

Citation preview

  • Are hotel guest complaints and door damage caused by doors hitting a privacy guard a problem?

    View video demonstration online at http://dhsi-seal.com/securelatch.htmACTIVELINKACTIVE

    LINKACTIVE

    LINKACTIVE

    LINK

    SAL-3-w copyright

    DHSI17 Silver Street, Rochester, New York 14611 TEL (585) 235-8543 FAX (585) 235-0431Website: dhsi-seal.com e-mail: [email protected]

    Contact Person: Robert Rissone, PresidentD H S IOOR AND ARDWARE YSTEMS, NC.

    #SAL "Secur-A-Latch" Privacy Keeper PATENT#6,244,636©

    Makes a door code compliant - for fire code and ADA

    Can't prop door open - for NFPA 80 code compliance Touch to Engage - Touch to Release for ADA

    Quietly Disengages- If guests try to prop door openNo damage to door face or edge, or adjacent closet doorsAvailable in various Architectural Finishes: US3, US4, US10, US10B, US14, US15, US17A, US26, US26DConsult DHSI for convenient bypass operation for emergency ingress.

    Emergency Bypass satisfies Life SafetyRare earth magnet eliminates re-locking from vibrationSelf-Adhesive Decals available to cover existing holesUse in preschool, daycare, etc for unwanted exit.Code compliant hold-open option for unoccupied rooms

    #SAL x Finish

    Lifetime non-corrosive spring ensures permanent returnLifetime magnet ensures ensures permanent holding Highest level of assurance for safety and eliminates lockouts

    the originalinnovator

    door frame wall

    "Touch to engage"©Magnet holds "SAL" in locked position.Prevents door from opening.

    frame wall

    Spring holds "SAL" in unlocked positionPush to engage and secure.

    door

    "Secur-A-Latch" eliminates door damage, edge guards, noise complaints, adjustments and is CODE COMPLIANT.

    ViewedFromInsideRoom

    Eliminate the swing bar door guard

    "Touch to release"© to disengage magnet.Also disengages quietly upon door closing.Spring resets "SAL".

    DISENGAGED

    AUTO-RELEASE

    door frame wall

    ENGAGED

    - the biggest "problem product" in the industry:

    The Conventional Swing Bar door guard is not compliant per NFPA 80.

    This applies to new and existing openings.

    Use the #SAL instead!

    Specify with DHSI Patented "Cush 'N' Seal" Frame Seals, Door Bottoms, Transitions, DVC and CNB!

    Return to DHSI brochure home page at http://dhsi-seal.com/brochure.htmACTIVELINKACTIVE

    LINKACTIVE

    LINKACTIVE

    LINK

    http://dhsi-seal.com/brochure.htmhttp://dhsi-seal.com/securelatch.htm

  • EDGEOFDOOR

    FACEOF

    DOOR

    WARNING:

    DOOR LO

    CKS

    AUTOMATI

    CALLY

    UPON CL

    OSING

    FRAME

    FOR YOU

    R

    COMFOR

    T

    AND SAF

    ETY

    PLEASE

    USE

    DEADBO

    LT

    PATENT#6,244,636

    AND PATENTS PENDING

    PATENT#6,244,636

    AND PATENTS PENDING

    FOR YOUR

    COMFORT

    AND SAFETY

    PLEASE USE

    DEADBOLT

    Door and frame hole cover labels for renovation use of "Secur-A-Latch"

    3"

    1 1/4"

    View video demonstration of #SAL online at http://dhsi-seal.com/securelatch.htm

    Specify with DHSI Patented "Cush 'N' Seal" Frame Seals and Door Bottoms

    Reminds users to use the "Secur-A-Latch"and deadbolt.

    Reminds users the"Secur-A-Latch" will not allow them to prop the door open.

    The decals cover the holes left in the door and frame from the 'swing-bar' door latch, especially when the #SAL is mounted at 48" or less from the floor to meet current ADA guidelines.

    "Secur-A-Latch"eliminates theneed for edge

    guards, and thedecals will

    cover the holesin the doorand frame.

    SAL-D1/D2-02 Copyright

    DHSI17 Silver Street, Rochester, New York 14611 TEL (585) 235-8543 FAX (585) 235-0431Website: dhsi-seal.com e-mail: [email protected]

    Contact Person: Robert Rissone, PresidentD H S IOOR AND ARDWARE YSTEMS, NC.

    #SAL-D1 and #SAL-D2 "Secur-A-Latch" Decals

    Part #SAL-D1 = “For your comfort and safety...”Part #SAL-D2 = “Warning: door locks automatically...”

    Eliminate the biggest "problem product" in the industry:

    The Conventional Flip Latch Privacy Keeper is not compliant per

    new updates and changes in NFPA 80.

    This applies to new and existing openings.

    WARNING:DOOR LOCKS

    AUTOMATICALLY

    UPON CLOSING

    1 1/4"

    #SAL-D1 #SAL-D2

    http://dhsi-seal.com/securelatch.htm

  • SAL HO-06 copyright

    DHSI17 Silver Street, Rochester, New York 14611 TEL (585) 235-8543 FAX (585) 235-0431Website: dhsi-seal.com e-mail: [email protected]

    Contact Person: Robert Rissone, PresidentD H S IOOR AND ARDWARE YSTEMS, NC.

    Part #SAL-HO

    For use with the #SAL “Secur-A-Latch” Privacy Keeper

    Allows you to hold the door open without causing door or hardware damage

    A special tool exclusively for use by service personnel maids, etc. for when rooms are out of service

    Note: the hold-open is not inherent in the design of SAL.

    Consult DHSI for convenient bypass operation for emergency ingress.

    FRAME EDGEOFDOOR

    FACEOF

    DOOR

    Paten

    ted so

    un

    d an

    d

    smo

    ke seals

    Holds the dooropen while working!

    #SAL-HO "Secur-A-Latch" Hold OpenPATENT#6,244,636

    AND PATENTS PENDING

  • FRAME EDGEOFDOOR

    FACEOF

    DOOR

    FOR YOU

    R

    COMFOR

    T

    AND SAF

    ETY

    PLEASE

    USE

    DEADBO

    LT

    FOR YOU

    R

    COMFOR

    T

    AND SAF

    ETY

    PLEASE

    USE

    DEADBO

    LT

    Deadbolt warning label for security.

    Does not allow oppositeguest to see past the door.

    Does not allow easy hookingof the lever to enter whenthe opposite guest forgets to engage the deadbolt!!

    If latch is ‘carded’ the lever can not be hooked.

    Specify the #SAL-CONN with the#SAL Privacy Keeper!

    Privacy and Safety#SAL-CONN NO GAP =

    With the use of a traditional flip-style privacy guard, a guest may not know the deadbolt is not engaged, may engage the privacy guard and may not realize the latch on the lever was not fully engaged, which would expose them to easy entry.

    #SAL “Secur-A-Latch”

    #SAL-CONN

    #SAL-CONN eliminates sight past door when used with the #SAL

    LOOKLOOK

    #Swing Bar Door Guard allows sight, etc. past door

    LOOKLOOK

    #SAL-SC Screw Cover

    Exclusive from DHSI

    Specify with DHSI Patented #SAL “Secur-A-Latch” Privacy Guards, "Cush 'N' Seal" Frame Seals, Door Bottoms & Thresholds

    SAL-CONN/SC-03 Copyright

    DHSI17 Silver Street, Rochester, New York 14611 TEL (585) 235-8543 FAX (585) 235-0431Website: dhsi-seal.com e-mail: [email protected]

    Contact Person: Robert Rissone, PresidentD H S IOOR AND ARDWARE YSTEMS, NC.

    #SAL-CONN Connecting Spacer #SAL PATENT#6,244,636Optional spacer for use with "Secur-A-Latch" at Connecting openings

    Does not allow sight past door at Connecting!

    View 16-page color brochure online at http://dhsi-seal.com/brochure.htmACTIVELINKACTIVE

    LINKACTIVE

    LINKACTIVE

    LINK

    Optional cover for use with "Secur-A-Latch" to cover screws for aesthetic purposes

    Matching architectural finishes - available in US3, US4, US10, US10B, US14, US15, US17A, US26, US26D

    Applies with extremely strong adhesive

    Self-Adhesive for easy application

    Discourages tampering#SAL-SC

    http://dhsi-seal.com/brochure.htm

  • Optional Sound Absorber Pad for use on "Secur-A-Latch"

    Specify with DHSI Patented #SAL “Secur-A-Latch” Privacy Guards, "Cush 'N' Seal" Frame Seals, Door Bottoms & Thresholds

    SAL-PAD/DS-05 Copyright

    DHSI17 Silver Street, Rochester, New York 14611 TEL (585) 235-8543 FAX (585) 235-0431Website: dhsi-seal.com e-mail: [email protected]

    Contact Person: Robert Rissone, PresidentD H S IOOR AND ARDWARE YSTEMS, NC.

    #SAL-PAD "Secur-A-Latch" Cush Pad

    #SAL-PAD is optional only.Under normal use pad is not required.

    Can reduce sound of door hitting the#SAL when engaged.

    Not visible to guest.

    Provides additional sound absorption ifdoor does not hit #SAL squarely

    Available in packs of 25

    Part #SAL-PAD

    ConcealedConcealed

    Does not cause damage to the door like ‘wedge’ style door stops

    Holds door open without having to bend over to engage or disengage and pick up

    #DS "DoorSaver" ©

    Non-Skid: Works with Tile, Laminate, Concrete and Carpeted floors

    Conveniently stores on housekeeper’s or engineer’s cart

    Used in conjunction with DHSI #SAL “Secur-A-Latch” Privacy Keeperto eliminate damage to edge of door by swing-bar door guard

    Door Stop / Hold Open

    Shipped flat with velcro closure at top and “zip-lock” bag for use with sand, pebbles, etc.

    Holds open doorwithout causing

    damage!

    For use by Housekeepers, Chief Engineers, etc.

  • CNB-06 copyright

    DHSI17 Silver Street, Rochester, New York 14611 TEL (585) 235-8543 FAX (585) 235-0431Website: dhsi-seal.com e-mail: [email protected]

    Contact Person: Robert Rissone, PresidentD H S IOOR AND ARDWARE YSTEMS, NC.

    Banging and Noise ComplaintsDamage to electronic boardsDamage to clutch mechanismsOut of service roomsService repair costs

    ©

    ©

    “Cush ‘N’ Bolt” #CNB Deadbolt Silencer

    “Secur-A-Latch” Privacy Guard

    “Cush ‘N’ Seal” Frame Seals

    From the creators of the patented:

    Patents Pending©

    BEFORE: AFTER:

    BANGBANGBANGBANGBANG

    ThudThud

    Click for video with and without the #CNB below

    DHSI: “The Quiet Latch Sealing System” www.dhsi-seal.com©

    The #CNB protects the lock and addresses noise complaints when deadbolt is used to keep the door open

    A family of products to address:

    A Program of ‘Field Quality Assurance’ and field technical services

    Top insert matches the finish of the lockset: US3, US4, US10B, US15, US26, US26D

    http://dhsi-seal.com/brochure.htm