DRIVING DIRECTIONS

433 Council Drive, Fort Wayne, IN 46825

Sale Location: 1612 Progress Dr., Albion, IN 46701

WWW.CHARLESTONAUCTIONS.COM

MAP

1612 Progress Dr., Albion, in 46701

Auctioneers: Chad Olson, Adam Olson Indiana Company License # AC68900001

260-373-0850 • Toll Free 877-357-8124 • Fax 260-373-0854E-mail: info@charlestonauctions.com • Website: www.charlestonauctions.com

FIRST CLASS U.S. POSTAGE

PAID FORT WAYNE, IN

PERMIT #1420

OKUMA MC4VA

GIUSTINA OD GRINDER

OKUMA LB25 M CNC LATHE

FRIDAY, MARCH. 26TH – BEGINNING @ 10:00 AM EST (LOCAL TIME)

Live Internet Bidding

BidSpotter.com®

www.charlestonauctions.com to register

MArCH1 652 3 4

71421

81522

91623

1017

26

1118

1219

27

1320

29282524

30 31

(70) HIGH BAY LIGHT FIXTURES HP DESIGN JET 650 PLOTTER XEROX EXS 2001 ENGINEERING SYSTEM

PLAN NOW TO ATTEND

PLAN NOW TO ATTEND

Preview Inspection: Thursday, March 25th 9:00 a.m. - 5:00 p.m. EST (Local Time)

SALE: FRIDAY, MARCH 26TH - BEGINNING @ 10 AM EST (LOCAL TIME)PrEvIEW: THURSDAY, MARCH 25TH - 9:00 AM - 5:00 PM EST (LOCAL TIME)

TRANSFORMERS VARIOUS TOOL STEELVARIOUS JOB BOXES

WILLIS MICRO CUT GAP BED LATHE

HEAVY DUTY MACHINE SKATES

LARGE QTY. OF LATHE TOOLING

LH PIC: (1 OF 3) 2 X 4 DOWN DRAFT TABLES LH PIC: VARIOUS HYDRAULIC LIFT TABLESrH PIC: ABRASIVE 618 HANDFEED SURFACE GRINDER

HARIG 618 HANDFEED SURFACE GRINDER

Our on-line market place is rapidly becoming the hottest spot to buy and sell used industrial equipment. Major Manufacturers are uploading equipment daily.

CHARLESTON AUCTIONS ONLINE MARKETPLACE

CMCharleston Marketplace

www.charlestonequipmentmarket.com

Sale Location: 1612 Progress Dr., Albion, IN 46701

Surplus to the Ongoing Needs of:

Sale Date & Time: Friday, March 26th, Beginning at 10:00 am EST (Local Time)

surplus to the ongoing needs of:

Preview Inspection: Thursday, March 25th, from 9:00 am to 5:00 pm EST (Local Time)

Sale Date & Time: Friday, March 26th, Beginning at 10:00 am EST (Local Time)

Preview Inspection: Thursday, March 25th, from 9:00 am to 5:00 pm EST (Local Time)

AUCTion iTeMs

Auction site 1612 Progress Dr., Albion, in 46701

From the Fort Wayne international Airport 3801 West Ferguson rd., Fort Wayne, in 46809 (260) 747-4146

1. Head West on W. Ferguson Rd. toward 7th St. (0.4 mi.) 2. Continue onto Ardmore Ave. (6.9 mi.) 3. Continue onto Hillegas Rd. (2.7 mi.) 4. Slight left at Goshen Rd. (0.2 mi.) 5. Slight left to stay on Goshen Rd. (240 ft.) 6. Take the 1st right onto Goshen Rd/US-33 N Continue to follow US-33 N (17.5 mi.) 7. Turn right at IN-9 N/S State Rd. 9-57 Continue to follow IN-9 N (7.7 mi.) 8. Turn right at E 300 N/IN-8 E/E Main St. (1.0 mi.) 9. Turn right at E Park Dr. (226 ft.) 10. Take the 1st left onto Progress Dr. Destination will be on the right (0.2 mi.)

1612 Progress Dr. Albion, in 46701- WATCH FOr AUCTION SIGNS!

Surplus to the Ongoing Needs of:

surplus tool room & CnC equipment from recent acquisition.

“Quality CNC Machining”

“Quality CNC Machining”

“Quality CNC Machining”

LA GUN MILL

Live Internet Bidding

BidSpotter.com®

www.charlestonauctions.com to register

PLAN NOW TO ATTEND

SALE: FRIDAY, MARCH 26TH - BEGINNING @ 10 AM LOCAL TIME EST (LOCAL TIME)

ESAB PCM 875 PLASMA CUTTER

COLCHESTER LATHE

PrEvIEW: THURSDAY, MARCH 25TH - 9:00 AM - 5:00 PM EST (LOCAL TIME)LIvE INTErNET BIDDING!VISIT WWW.BIDSPOTTER.COM FOR REGISTRATION

(1 OF 6) DUMP HOPPERS

KINGSBURY 4 SPINDLE DRILLING MACHINE

rIGHT PIC: SHARP SH 920 3 HP GRINDER

rIGHT PIC: ELECTRIC EVAPORATORrIGHT PIC: HANNIFIN PRESS

rIGHT PIC: MILLER MILLERMATIC 300 WIRE WELDER

MACHINE SHOP EQUIPMENT:LAGUN Vertical Milling Machine Model FTV-2 SN-SE34158 10” x 52” Power Feed Table, 55-4, 250-RPM, 3 HP Equipped with Power Drawbar, Newall DP7 2-Axis Digital Readout, ViseLAGUN Vertical Milling Machine Model-FTV-2 SN-SE32182 10” x 52” Table, 55-4,250-RPM, 3 HP Equipped with Anilam Mini-Wizard 2-Axis Digital Readout, ViseLAGUN Vertical Milling Machine Model-FTV-2 SN-SE32182 10” x 52” Table, 55-4,250-RPM, 3 HP Equipped with Power Drawbar, Power Cross Feed Anilam 1100M CNC Control, ViseGUISTINA 16” x 28” Plain Cylindrical Grinder SN-1087HARIG 6” x 18” Hand Feed Surface Grinder Model-618 SN-N/A Equipped with Magnetic Chuck, 1 HP Main Spindle Drive MotorSHARP 9” x 20” Hydraulic Surface Grinder Model-SH-920 SN-81005-04 Equipped with Magnetic Chuck, Power Feeds, Coolant SystemsNOVATECH Universal Optical Drill Grinder Model-Mega-Point SN-98219 Capacity: .039”-.787” Cutting Angle: 80 Degree-150 Degree Max. Spindle Speed: 2,800-RPM Max Wheel Diameter: 5” Equipped with Dust Collector, Optical Comparator, Mounted on Steel Cabinet BaseVICTOR Universal Tool & Cutter Grinder Model-TM-40 SN-2505 5” x 27” Table, Travels: Table-16”, Saddle-10” Max. Swing: Max. Spindle: 10”, Max. Spindle Speed: 6,200-RPM Equipped with 1 ½ HP Wheelhead Drive Motor, ¼-HP Workhead Drive Motor, Dust CollectorLEADER 15” x 60” Engine Lathe Model-1560 SN-JL091 40-1,600-RPM, 3” Spindle Hole, Inch/Metric Threading Equipped with 8” Collet Chuck, 10” 3-Jaw Chuck, 12” 4-Jaw Chuck Tool Post, Anilam Mini-Wizard 2-Axis Digital Readout1987 W.F. WELLS 9” x 18” Two-Post design Horizontal Band Saw Model-WM-918 SN-870104 Equipped with 60” Roller Infeed Conveyor, Coolant System, 2-HP Main Drive MotorRIGID Pipe Threader Model-53550-Ton Hydraulic H-Frame Shop PressTRINCO 2-Arm Shot Blast Cabinet Model-36/BB2 SN-34228-9 36”W x 24”D x 24”H Chamber, Equipped with TRINCO BP2 Dust Collector1991 LINCOLN CV/DC Arc Welding Power Supply Model-Idealarc 250-AMP SN-AC-804129MILLS Microcut Manual Lathe SN-7425MILLER Syncro Wave 350 LX Welder SN-1664792000 MILLER 300-AMP Arc Welding Power Supply Model-Millermatic 300 SN-LA212844 Equipped with Wire Feed

WELLS HORIZONTAL BAND SAW

HUGE QTY. OF VARIOUS CONVEYOER

LARGE QTY. OF PERISHABLE TOOLING

(OVER 10) VARIOUS WORK BENCHES

(1 OF 2) OKUMA CNC MC50VA VERTICAL MACHINING CENTERS

GIUSTINA OD GRINDER

LEFT PIC: MILLER SYNCROWAVE 350 XL WELDING POWER SOURCE

LEFT PIC: CORDAX CMMLEFT PIC: FLOOR MOUNTED JIB CRANE WITH HOIST

LEFT PIC: LINCOLN IDEAL ARC SP 225 WIRE WELDER

SALE LOCATION: Sale Location: 1612 Progress Dr., Albion, IN 46701 DATE & TIME: The Auction will begin promptly at 10:00 a.m. EST (Local) on Friday, March 26th. Preview Inspection: The items will be available for advance inspection from 9:00 a.m. - 5:00 p.m. EST (Local) on Thursday, March 25th.TERMS OF SALE: For on-site buyers a 10% Buyer’s Premium will be charged on all purchases. A 13% Buyers’ Premium will be charged if using a credit card. Charleston Auctions is now accepting all major credit cards. For On-Line Auction Terms, please visit bidspot-ter.com. All bidders must register and provide proper identification. All items are sold “as is, where is” and must be paid for IN FULL, in CASH, CHECK, OR CREDIT CARD accompanied by A LETTER FROM THE PAYOR’S BANK GUARANTEEING UNQUALIFIED PAYMENT TO CHARLESTON AUCTIONS for this sale. REMOVAL: All rigging and moving companies must be pre-approved prior to sale day. No items will be removed without proof of payment. Sale day removal from conclusion of sale until 6 PM. Removal Dates & Time: Removal will be held Monday-Friday 8:00 a.m.-6:00 p.m. March 29-April 2, 2010 and April 5-6, 2010. Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser. Your stamped paid receipt must be shown to checkout supervision prior to re-moval. Although checkout supervision will be provided, the auction company and sellers are not liable for lost or stolen items purchased at the sale.DISCLAIMER AND ABSENCE OF WARRANTIES: Each potential Bidder is responsible to conduct, at their own risk and cost, their own independent inspections, investigations, inquiries, and due diligence concerning the property. Seller and Charleston, or Charleston’s agents and associates, are not responsible for any warranty as to condition of property. Bidder shall be fully responsible for confirming that each item bid on is appropriate for Bidder’s intended use. Neither Charleston nor Seller shall be responsible, in an way, for confirming or denying the specific identity or intended use of any item or piece of property. Inspection dates have been scheduled and will be staffed with auction personnel. Please feel free to inspect the property at any other time, so long as arranged in advance with Charleston. Bidder shall repair any damage to the Property done by Bidder, its represen-tatives and agents, while conducting any Inspections. In addition, Bidder shall indemnify, defend and hold Seller harmless for any claims or damages suffered by Seller relating to actions taken by Bidder, its representatives and agents, while conducting any Inspections.The property is being sold on AS IS, WHERE IS basis, and no warranty or representation, either express or implied, concerning the property is made by the Seller or the Auction Company. The information contained in this brochure is subject to verification by all parties relying on it. No liability for its accuracy, errors or omissions is assumed by the Sell-ers or the Auction Company. GOVERNING LAW: Bidder agrees that no matter what State or Country Bidder resides, or location of the auction, all disputes or disagreements shall be construed according to the laws of the State of Indiana.Charleston Auctions Reserves the right to reschedule due to inclement weather. Items Subject to Presale.

IMPORTANT INFORMATIONPLEASE NOTE: OUR BIDDER PAYMENT

TERMS AND CONDITIONS HAVE CHANGED. PLEASE VIEW OUR WEBSITE FOR DETAILS!

ESAB Plasma Cutter Model-PCM-8751995 LAGUN Vertical Milling Machine Model-FTV-2S SN-SE29370 10’ x 52” Power Feed Table, 55-4,250-RPM, 3 HP Equipped with Anilam Mini-Wizard 2-Axis Digital Readout, ViseCRESS Electric Bench-Top Furnace Model-C-136TCZ SN-8912 2,250 Degrees F, 6.5” x 9” x 5”H Chamber Equipped with Cycle Timer, Watlow LED IndicatorsPOWERMATIC 14” Vertical Band Saw Model-143 SN-793210Handling Systems Arm Floor Mounted Jib Crane ½-Ton x 10’, Equipped with 360 Degree Rotation, Electric Chain Hoist, Pendant ControlCNC MACHINING1994 OKUMA CNC Vertical Machining Center Model-MC-50VA SN-0163 3-Axis, 20” x 51” T-Slotted Table, Travels: X-41.3”, Y-20.1”, Z-22.1” Max. Spindle Speed: 5,000-RPM, #50 Taper Equipped with 20-Position Automatic Tool Changer OSP5020M CNC Control, Coolant System, Chip Conveyor1994 OKUMA CNC Vertical Machining Center Model-MC-50VA SN-0162 3-Axis, 20” x 51” T-Slotted Table, Travels: X-41.3”, Y-20.1”, Z-22.1” Max. Spindle Speed: 5,000-RPM, #50 Taper Equipped with 20-Position Automatic Tool Changer OSP5020M CNC Control, Coolant System, Chip Conveyor 1997 OKUMA CNC Mill/Turn Center Model-LB25II-M SN-0328 OSP7000L CNC Control, Coolant System, Chip Conveyor 4-Axis, Max. Swing: 24.4”, Max. Machining Length: 26.6”, Max. Spindle Speed: 2,800-RPM Equipped with (1) 12-Station Turret, 10” 3-Jaw Hydraulic ChuckOKUMA CNC Turning Center Model-LB25 SN-1487 OSP5020 CNC Control, Coolant System, Chip Conveyor, Programmable Tailstock 2-Axis, Max. Swing Over Saddle: 16.5”, Max. Between Centers: 26.5” Max. Spindle Speed: 3,500-RPM Equipped with (1) 12-Station Turret, 8” 3-Jaw Hydraulic Collet ChuckOKUMA Vertical CNC Mill, Model MC-4VA 5020 Type Controller, Standard Coolant System, 4th axis capable, S/N 9791Okuma Vertical CNC Mill, Model MC-4VA 5020 Type Controller, Standard Coolant System, S/N 95861996 OKUMA CNC Vertical Machining Center Model-Cadet-V SN-0101 OSP5020M CNC Control, Coolant System, Chip Conveyor 4-Axis, 20” x 47.2” Table Size, Travels: X-40”, Y-20”, Z-20” Spindle Speeds: 8,000-RPM, #40 Taper Equipped with 20-Position Automatic Tool ChangerKINGSBURY Tapping & Boring Machine 6-Spinldes Drilling SN-N/A 15-HP Hydraulic Pump with Heat Exchanger, 250-Gal. Capacity 7.5-HP Hydraulic Pump, Mayfrane Elevated Chip Conveyor

(1 OF 4) ROTO FINISH VIBRATORY SYSTEMS

BidSpotter.com®BidSpotter.com®

2002 MIDBROOK PARTS WASHER

LEADER 1560 TOOL ROOM LATHE

LH PIC: (1 ) OKUMA CNC CADET V VERTICAL MILLING MACHINES

LH PIC: LAGUN FTV 2 VERTICAL MILLING MACHINE WITH DRAW BAR & POWER FEED

LH PIC: LAGUN FTV 2 VERTICAL MILLING MACHINE

LH PIC: RIDGID 535 POWER THREADER

rH PIC: (1 OF 4) LAGUN VERTICAL MILLING MACHINES

LH PIC: DAKE 50 TON H FRAME SHOP PRESS

rH PIC: LAGUN FTV 2 VERTICAL MILLING MACHINE

rH PIC: MEGA POINT PRECISION GRINDER

rH PIC: VICTOR TM 40 UNIVERSAL GRINDER

rH PIC: LAGUN FTV 2 VERTICAL KNEE MILL

VIBRATORY FINISHING EQUIPMENT ROTOFINISHER ER0405 Vibratory Finisher 5 CU Ft. Capacity 10" Channel 3 HP Motor Internal SeperationROTOFINISHER Model MP-164-8-5 Multipass Burnisher 164" Diameter 8" Channel 5 Revolutions in Machine 30 HP Motor Triple Drive ROTOFINISHER Model MP-144-8-4 Multipass Combo Burnisher 144" Diameter 8" Channel 4 Revolutions in Machine 25 HP Motor Triple DriveROTOFINISHER Model MP-120-8-2 Multipass Burnisher 120" Diameter 8" Channel 2 Revolutions in Machine 20 HP Motor Triple DriveQUALITY CONTROL AND INSPECTION EQUIPMENT1997 LK Coordinate Measuring Machine Model-G90C SN-CMM-1/14316 Renishaw PH10M Probe, SN-Z09895, Remote Control 50” x 55” x 8 ½” Gray Granite Surface Plate, Drilled and Tapped Dell Optiplex TC, Monitor, KeyboardMITUTOYO Coordinate Measuring Machine Model-B504B SN-0080021 Renishaw TP1S Probe, SN-U46199 34” x 34” x 7 ½” Drilled and Tapped Granite Surface Plate, 3-Axis Digital ReadoutGIDDING & LEWIS CMM

VARIOUS WELDERS

WARNER & SWASEY 60 HV TENSIL TESTER

Live Internet Bidding

BidSpotter.com®

www.charlestonauctions.com to register

1997 LK G90C CMM

Visit our web site: www.charlestonauctions.com for upcoming auctions and to

visit our marketplace.