Mills

2

Features:● Compact size. The main body shell, container and lid are stainless● The container unit and machine body are separated; users can take off the container unit for dry cleaning after using. (Users also can purchase a few container units for alternate using.)● Useful to crush dried food, drugs, alumina, bones, grains, seeds, porcelain, mineral etc. (You can purchase the special processed blade for crushing harder materials like porcelain, mineral, etc.) ● Cooling-type mill is based on cooling the temperature by a water circulation system to reduce the temperature inside the container. (The increasing temperature inside of the container should be possible to destroy the samples.) ● Optional: -transparent lid to observe material inside cup. -Lid for small quantities.

Sample

Model SM-450 SM-450L SM-450C

Motor 1200W

Speed (rpm) 0-30,000

Body Size Ø170 x 330H(mm)

Cup Inner Size Ø108 x 51H(mm) Ø135 x 60H(mm) Ø108 x 51H(mm)

Volume 300CC 400CC 300CC

Max. Capacity 150ml 200ml 150ml

Cooling jacket No Yes

Net weight 5.1kg 6kg

Power AC110V/220V, 50/60Hz

SM-450/SM-450TR/SM-450C, Sample Mills

SM-450C

Optional: Lidfor Small quantitiesAssembly tool unit

SM-450

MILLS

SM-450L SM-450TR

With transparent cover

3

MILLSBatch Mill

Model KM-700 KM-1500Speed (rpm)

Cap dimensions (mm) Ø130 x 55H Ø160 x 75H

Volume 700CC 1500CC

Max. capacity 200ml 375ml

Motor 1000W 1350W

Overall DIM. (mm) Ø162 x 298 Ø270 x 300

Net Weight (kg) 4.6 10

Power

Features:● Durable motor.● Made of SS304.● Fast & efficient grinding.● Easy operation.● No premixing.● Low maintenance.This model is equipped with special pressure hoods which makes it possible to mill leaf, branches, wood, bones, seeds, dry food, building materials and chemical, into flour like powder in large quantities and during short operation time.Shouldn’t be used with wet or greasy samples.

KM-Series, Knife Mills for hard dry materials

KM-1500

Knives for KM-1500

Empting of model KM-1500

KM-700

Knivesmaterial: SUS420

● Easy replacement of blade knifes.● Applications: grain, seeds, spices, rice, wheat, salt, bonds, wood, leaves, tea leaves, tobacco, pigments, detergents, roots, stems, coal, coke, tablet, pills.● Used in building materials in dust, Chemical industry, Medical industry, Paint and Varnish industry, Pharmacy industry.

Grinding Examples of KM-1500Gravel Building blocks

LeafWheat Rice

Wood

Before

Before

Before

Before

After

After

After

Before

Before

After

After

After

4

MILLS Fast Mill

FAM-100, Fast MillVersatility and suitable for the soft, brittle, fibrous and hard samples in fast, efficient, mild crushing processing. Is the food, feed, pharmaceutical,coating, agricultural test choice of NIR instrument.

Sample comparison before and after grinding:

Sample picture Parameter

Before grinding After grinding Sample Circuit board

Speed setting 12 teeth rotor, stainless steel

Sample characteristic Tough

Attention Reject the metal part first,the feed size must be less than 8mm

time Real time

Before grinding After grinding Sample Corn

Speed setting 12 teeth rotor, stainless steel

Sample characteristic Oil, hard

Attention feed size must be less than 8mm

time Real time

Before grinding After grinding Sample Dog food

Speed setting 12 teeth rotor, stainless steel

Sample characteristic Hard

Attention feed size must be less than 8mm

time Real time

Before grinding After grinding Sample Traditional chinese medicinal materials

Speed setting 12 teeth rotor, stainless steel

Sample characteristic Hard

Attention Dry, feed size must be less than 8mm

Grinding ball Real time

Product applicationApplication fleld: dry grinding, fine grinding ,cryogenic grinding Sample: soft, medium-hard, brittle, fibrous sample Application sample: agriculture, environment, soil, electron, RoHS, chemical, plastic, medicine, animal food, grain, dry plant and so on.

Diversified application, effic ient sample preparation:The fast mill FAM-100 applies to a wide range of samples such as chemicals, drugs, seasoners, synthetic resin, coal, plastics, agent ia raw materials, finished drugs, fertilizers, foods and so on. Based on its efficient grinding technology and diversified accessories, FAM-100 can guarantee moderate samplepreparation in instantaneous time. Diversified application for example: Ecological environment protection: plants (root, stem and leaf, etc.) sample preparation, C.H.N determination of coal, coatings, such as sample preparation, ash content, thermal measurement. identify the nitrogen composition and protein composition of feed and food. Secondary fuel, rubbish, plastic, electronic elements, the determination of harmful substances. The Fast mill FAM-100 is used for rapid fine grinding of soft, medium-hard and fibrous sample. Based on its efficient grinding technology and diversified accessories, the secondary grinding with the rotating rotor ring sieves system can guarantee moderate samplepreparation in a very short time. The accessories in grinding operation such as rotor, ring sieves, collecting pan, cover can be removed and re-installed quickly without tool to efficiently meet the requirement of preparing a large number sample.

FAM-100

the requirement ofpreparing a largenumber sample.

The grinding art for special samples:● Plastic and rubber samples have embrittlement in liquid nitrogen conditions, and refining treatment is the idealchoice. ● The distance ring sieve and automatic vibratory Feeder can be used for grinding heat-sensitive samples such as paints, resin. ● The rotor and ring sieve with wear-resisting coatings can be used for grinding rigid and corrosive materials such as fertilizers, chemicals.

Work principle:The fast mill can realize two-stage crushing for samples with the rotor and ring sieves. Samples are fed from the hopper withanti-splashing design. Under the effect of high speed centrifugal force, the falling samples and the high speed rotorgenerate a giant impact force to perform pretreatment for samples; then the samples are sheared, extruded and rubbed again between the rotor and ring sieves. The sample sizes less than the aperture of ring sieves enter into the collecting pan . The two-stage crushing can form moderate and efficient crushingresults. Due to the high crushing efficiency, the period of samples staying in the grinding chamber is quite short so as to avoid changes of sample natures.

5

MILLSFast Mill

Technical highlights:The specifically designed airpassage can guarantee that the grinding chamber has constant airflow to cool rotors so as to form ventilation system to guarantee the cooling ofsamples. There is a double layer wear proof seal ring between the grinding chamber and the driving motor toprevent dust from entering the motor.The electronic lock and the mechanical lock form double protection foroperators.The double anti-blocking hopper can effectively prevent feedstock blocking and effectively reduce noises.Special adapters can be equipped to perform large-capacity collections.The motor is equipped with the function of overload protection, and it can keep running after restarting due to overload.

Diversified accessories:RotorThe rotor have 3 kinds , 24 teeth, 12 teeth and 6 teeth, can be usedrespectively for fine sample,general sample, or particularly rough of the crushing of the sample. Ring sieves:Finally the sample fineness can bedecided by different aperture ring sieve. reinforcement ring sieve can extend the service life of sieve.All the rotor and the ring sieve material have stainless steel and the heavy-metal-free titan sets to be chosen. The rotor and the ring sieve should be chosen reasonable according to the properties of the samples, the required final fineness and subsequent analysis requires. We offer a special ring sieve with shear function, for most materials, about 80% of the samples can reach less than of the half fineness .of sieve aperture used.

Automatic feed device and large sample receiver:The fast mill FAM-100 can be equipped with an automatic feed device . The automatic sample feed operation can guarantee especially homogeneous grinding results and avoid the risk of sample feed overload. The grinded samples are collected in a collecting pan, which is convenient for collection without sample loss and prevents cross contamination ofsamples.When using a cyclone or a paper bag, the grinded samples can be cooled via airflow and leave the grinding chamber quickly via the collecting pan with an exit. f a vacuum cleaner is connected, the process can be faster and efficient. The cyclone can be used in conjunction with 250ml or 500ml sample bottles; in case large samples are grinded, the cyclone with the capacity of 3L or 5L can be selected. All parts contacting samples can be removed manul without any tools, and it is quite convenient to clean and install such parts.

Optional: Vibratory Feeder Optional: Cyclone

Model FAM-100

Speciality

Application filed Fine grinding

Sample characteristic Soft, medium-hard, brittle, fibrous

Transport data

Package size 62x60x60cm

Instrument size 48x40x48cm

Gross weight 40kg

Net weight 34kg

Technical data

Feed size Less than 10mm

Final fineness Less than 100um

Option ring sieve 0.20, 0.50, 1.00, 2.00 mm

Collecting pan volume Standard pan: less than 500ml (1000ml)

Motor speed 6000 - 18000 rpm, constant adjustable

Peripheral speed 29.83-99.43m/s

Rotor diameter 95mm

*depending on feed material and instrument configuration

Technical advantage:● Provide all kinds of accessories to ensure the application of diversification.● The final fineness less than 100um● Speed is adjustable from 6000-18000rpm● Two stage rotor-ring sieve system to realize quickly grinding.● Low noise, reliable operation, easy clean.● The rotor diameter is 9Smm, peripheral speed up to 99.43m/s, can get efficient grinding results.● Touch control panel, convenient and quick.● The fineness depend on the ring sieve.

6

MILLS Mortar Grinder

PMG-100 Mortar grinder PMG-100 is use to grindw homogenize & mix a wide range of solid material in dry/wet or cryogenic condition. For the modern laboratory applications, have extraordinary performance on the processing capacity, the comfort & safety of operation.

PMG-100, Power Mortar Grinder

Technical DataPower supply 200-240V, 50/60HzMotor speed 50-130 rpm adjustable

Nominal rating 180 Watt

Transport DataGross dimensions w x d x h App. 580x580x600mmNet dimensions w x d x h App. 400x460x480mm

Gross weight 39kgNet weight 34kg

Features/PerformanceWorking principle Friction, Pressure

Feed size maximum 8-10mmFinal fineness 10-20µmBatch quantity 10-200ml

Grinding time setting 1-99mln, continuous adjustment, digitalThe pestle pressure adjustment Yes. by adjusting scale

The scraper pressure adjustment Yes. by adjusting rotary knob

Application Example:Universal, High performance Mortar Grinder is used to process high repeatable the solid material in dry, wet or cryogenic condition. (eg. Soil, corn, grain ,glass, pill,rice)

Sample picture ParameterBefore grinding After grinding Sample Corn

Grinding set The mortar & pestle of S.SSample characteristic Hard, oiliness

Attention The feed size must be less than 8mmtime 12 min.

Before grinding After grinding Sample PillGrinding set The mortar & pestle of S.S

Sample characteristic BrittleAttention feed size must be less than 8mm

time 3 min.Before grinding After grinding Sample Soil

Grinding set the mortar and pestle of agateSample characteristic Soft, powder

AttentionRemove the stone,metal from the sample first,the feed size

must be less than 8mm,time 5min.

Before grinding After grinding Sample GlassGrinding set The mortar & pestle of S.S

Sample characteristic Hard, BrittleAttention The feed size must be less than 8mm

time 10min.

Before grinding After grinding

Before grindingBefore grinding After grindingAfter grinding

The method of operation:The material to be processed falls into the Pulverizing area between mortar and pestle by top feeding via the opening which is at the inlet cover. The material is then pulverized and mixed between the mortar inner surface area and the bottom of the pestle. n order to match the necessary top pressure with the requested end fineness and the breaking behaviour of the sample to be prepared the PMG-100 is equipped with and adjustable. Top pressure mechanism with scale & a variable speed setting 50- 130rpm and a flexible scraper setting.

No other grinding system is more easy to clean than the PMG-100 Mortar Grinder. When the grinding process is finished the mortar and pestle can be removed by a bayonet lock in order to perform a quick cleaning of the grinding tools.

Grinding Homogenizing Hriturating:The Mortar Grinder is the central machine in a sample preparation Laboratory of today. This system is suitable for the fine grinding of any dry substance,as well as for suspensions with different viscosities for analysis,quality control and material testing.It is perfectly suitable for the homogenization of cremes and pastes,Typically samples with a feed size of up to 8-10mm and a total batch of up to 200 ml (volume depending on the

characteristicistic of the samples) can be ground down to10-20µm.

Technical features:● 3 kinds of material scraper to be choose● Humanization deslgn, easy clean● The speed is adjustable between 50-130rpm● Digital time setting, speed adjustment● Remove the mortar & pestle without tool● Suitable for the yeast cell disruption.

7

MILLS

MILLSMortar Grinder

Cup made of PC with transparent cover to observe material inside the cup.

Model KM-100

Speed 2,000~10,000rpm

Timer 1~60 seconds

Power AC110V/220V, 50/60Hz

Outline Size (mm) 220x160x260

Net Weight (kg) 4.7

● Made of cast steel and aluminum ● Separated Grind container ● Powerful disintegration device ● Grinding time: 1~60sec ● Power cut off automatically ● Fast & efficient grinding ● Easy Operation ● Adjusted speed and timer.

KM-100, Tablet Grinder for Pharmaceutical Laboratories

KM-100

● Quiet operation● Transparent chamber to observe the inside powder● Safety - sealed housing to protect user● Perfect milling results● Large applications range: Pharmaceutical tablets, vitamin pills, grains, seeds, leaves, salt, detergents, coal, coke, rice.

Tablet Grinder for Pharmacentical Laboratory

Made of cast steel and aluminum

Pharmaceutical Laboratories

High operater convenience and maximum safetyMaximum grinding performance and maximum safety is Important for our mills. Due to an integrated safety switch the machine can only be started when the “Easy Lock Cover”ls closed. The”Adjustment mechanism” allows the simple & fast settings & fine adjustment.The cover as well as the housing of the PMG-100 is made from solid steel. The ergonomic design of the machine and the front panel ensures the easy and simple setting of all working parameters.

Product Advantage:● Suitable for dry, wet & cryogenic grinding ● Option of pre-crushing for coarse materials● Possible to add sample material during the milling process via cover Inlet ● Positioning and removal of mortar and pestle without tool● Touch human-machine Interface, high sensitivity sensor● Representative results due to digital time and speed setting● Precise and optimized result due to variable speed 50-130rpm● Meet all application tasks due to a wide selection of grinding tools for the mortar and the pestle● Meet all application tasks due to a wide selection of scraper materials (Vulkollan, Teflon, Besch, Wood)● Precise and reproducible pestle setting due to scale adjustment.

The pestle is adjustable horizontalUsing rotational structure to make the pestle slight adjustment In the horizontal position, by rotating the handle can adjust pestle position, the operation Is simple, the clearance between the mortar and pestle is adjustable, guarantee the quality of the sample preparation.The pestle is adjustable LongitudinalConsidering the requirement that the fineness depending by the pestle pressure, and suspend the sample preparation at any time, so the device adjustable pressure at the top of the machinery can to ensure the pestle slightly on the longitudinal mobile, to adjust the pestle and mortar In the clearance between the longitudinal distance.Adjustabl e scraperThe position of scraper between mortar and pestleIs adjustable to ensure that the sample in the grinding process can fully mixing evenly, and then to improve the quality of the sample preparation. The adjustment is Simple operation.

Adjustable scraper

Adjustablepestle

Above product has applied for national patent, counterfeit will investigate

Achieve the best grinding result of grinding technique● Before prepare the paste samples,first you can put the mortar and samples (cocoa) into the drying oven heated to 40°c.● In the preparation of chemicals and pharmaceuticals, adding grinding aid can help prevent caking phenomenon.● For some sample difficult to process such as yeast cells ,you can add the liquid nitrogen to make the sample brittle and easier to grinding.

8

MILLS Micro Ball Mill, Bead Beater

MBM-100 MBM-100, Vibration Ball MillThe Vibration ball mill MBM-100 is designed for modern laboratoryapplications. It can process small amount and large batch sample, forexample plant, animal tissue and small quantity sample in dry, wet orcryogenic condition.Product applicationApplication: Grinding ,mix and cell disruption for DNA/RNA Sample: hard, medium-hard, soft, elastic and fiber sample.Application field: plant root, stem, leaf, grain, seed; human and animal tissue, viscera, bone, hair;mineral, soil, glass, ceramic,rubber, plastic, solid waste,electronic waste, paper,textile, chemical, medicine, food the special application fieldrecommend:Plant tissue nucleic acid extraction, rapid extraction of genomic DNA from cultured cell preparation for PCR analysis, 96 hole high throughput of yeast cell,bacterial cell disruption (halophilic bacteria & bacillus) (See the website).Sample comparison before and after grinding:

Sample picture ParameterBefore grinding After grinding Sample SoyBean

Grinding ball 7mm stainless steeltube 5 MLPC tube

Sample Medium-hard, Large amount of fatAttention Must choose suitable ball

time 1min

Before grinding After grinding Sample MaizeGrinding ball 10mm stainless steel

tube 5 MLPC tubeSample brittle, hard

Attention The position of the ball & the sampletime 2min

Before grinding After grinding Sample OreGrinding ball 25mm stainless steel

tube 50ml stainless steelSample brittle, hard

Attention The filling volume of the sampletime 3min

Before grinding After grinding Sample Small mouse tailGrinding ball 7mm stainless steel

tube 2ml tubeSample hard, tough

Attention The feed sizeGrinding ball 3-5min

Before grinding After grinding Sample LeafGrinding ball 5mm stainless steel

tube 2ml tubeSample Soft, brittle

Attention Sample size and the ball sizeGrinding ball 1min

High operation convenience & maximum safetyMaximum grinding performance and maximum safety is important for MRC mills. Due to an integrated motor break the machine can only be started when the “easy covens closed . The unique “Easy clamp system”allows the simple and safe clamping of all grinding jars up to SOml.The grinding chamber ,easy clamp system as well as the swinging arm is made from high precision stainless steel to meet all food and pharmaceutical requirements. Due to the new motor concept and directmotor drive, the MRC MBM-100 ismaintenance free. Advanced touch screen design, can easily control instrument program, setting up the grinding parameters. The grinding time setting from 1 second to 99 min 59 second, continuouslyadjustable, digital display.The vibration frequency setting from 200rpm to 2000rpm, continuouslyadjustable, digital display.

Grinding, mix & cell disruptionThe MRC MBM-100 typical processing time are at 30 seconds. The MBM-100 can prepare 2 or more samples from 0.2ml of up to 50 ml. It is designed as well for high-sample-throughput. Grinding accessories options The clamping device of MBM-100 is not designed only for the standard deep well plate, it is also suitable for anything which has the same size,include thedifferent hole adapters and otherpossible accessories.

adapters for reaction vialsAvoid the cross contaminationbetween samples, achieve the high- throughput, the adapter can placeinto the liquid nitrogen directly.

Many kinds of materials grinding jar, the volume up to 50ml. Be suitable for processing the soil, mineral, plant, Dental Materials and so on.

Special use for detection of pesticide residue samples, 50ml. Adapters, can process 8pcs sample simultaneously.

9

MILLSMicro Ball Mill

The MRC specially design the aluminium-magnesium alloy clampingdevice , comfortable operation, strong and durable.Inside clamping device is equipped with a mobile positioning catch, greatly improve the grinding parts and service life of the clamping device; The catch is removable, easy to change, reduces the equipment maintenance cost.

Performance and advantage:● Extremely short processing times● Designed for high sample throughput● Universal and highly efficient grinding, blending and disruption● Large range of grinding jars and accessories● Pre-setting of all working parameters, the result is repeatable● Ransparent cover can let the operator view the grinding condition during the milling● Cover with a safety Interlock device, once the cover open during the milling, the motor will stop running in.

Grinding auxiliary accessories:Cryo kit for cooling the grinding jars or adapter with liquid nitrogenInsulation heat preservation box, the clamping device for jar, eyes protectorFor heat sensitive materials such as plastics and rubber, it is possible toembrittle the material with liquid nitrogen and perform and additionalexternal freezing of the fast clamping jars. Those jars are either made from teflon or from stainless safely disrupts samples of spores, microorganisms, plant and animal tissue or soll samples at a time.The samples along with extraction and small orceramic balls are placed in micro vials. After 2minutes of preparation in the MBM-100 more than95% of the cells are disrupted.Because balls andvials plates are disposable the method Is Ideal forPCR, PAGE, and Probe applications where crosscontamination between samples cannot betolerated. steeland are suitable for cryogenicgrinding applications. bead dispensers Be suitable for 96 hole deep well plate, have 3mmand 5mm to choose.

Selection guide jar filling:Recommend balls fillings for grinding 1ars and for static mixer

Grindingjar

volume

Feedsize

Smple filling

quantityRecommend ball filling

2mm 3mm 5mm 7mm 10mm 15mm 20mm 25mm1.2ml 1-2pcs. 1pcs.2ml ≤1mm 1-2pcs. 1-2pcs. 1pcs.5ml ≤2mm 1-2pcs. 1pcs.10ml ≤3mm 2ml 1pcs.25ml ≤6mm 4-10ml 1pcs.35ml ≤6mm 6-15ml 1pcs. 1pcs.50ml ≤8mm 8-20ml 1pcs.

Fast clamping jars for:● Dry grinding● Wet grinding● Ultra fine grinding● Mechanical alloying.

Reaction vial of many kinds:The PTFE and stainless steel reaction vial, the steel and tungsten carbide balls, can be used to process small amount sample in cryogenic mill.

Adapters for reaction vials:Designed for high analytical screening, the MBM-100efficiently and

safely disrupts samples of spores, microorganisms, plant and animal tissue or soll samples at a time.n The samples along with extraction & small or ceramic balls are placed in micro vials. After 2 minutes of preparation in the MBM-100 more than 95% of the cells aredisrupted. Because balls and vials plates are disposable the method Is Ideal for PCR, PAGE, & Probe applications where cross contamination between samples cannot be tolerated.

MBM-100

Model MBM-100Transport dataPackage size 600X600X500mmInstrument size 510X380X275mm

Net weight 34kgTechnical dataPower supply 220 - 240V , 50 - 60Hz

Nominal rating 200WPerformance data

Work principle vibration ImpactFeed size Less than 8mm

Final fineness approx. 5µmvibration frequency 200-2000rpm. continuous adjustment, digital

Batch quantity 0.2-50mlReaction vial quantity 4x2, 5x2, 6x2. 10x2. 12x2. 24x2. 96x2

10

MILLS Planetary Ball Mill

PBM-4 PBM-4/6, Planetary Ball MillFor rapid fine crushing of so hard, brittle and fibrous material to end fineness < um.The Grinding result is repeatable. The planetary ball mill can reach high fineness of grind. It can not only perform mixing and grinding, but also meet the requirements of colloid grinding. In addition, its giant energy input can meet the technical requirements of preparing alloywith mechanical methods.

For rapid fine crushing of so hard, brittle and

The Grinding result is repeatable. The planetary ball mill can reach high fineness of grind. It can not only perform mixing and grinding, but also meet the requirements of colloid grinding. In addition, its giant energy input can meet the

Sample comparison before and after grinding:Sample picture Parameter

Before grinding After grinding Sample GlassGrinding ball 10mm & 3mm grinding ball ZrO2

Sample characteristic Brittle & hard

AttentionGrinding jars should be symmetrical

placed, the sample should not be more than a quarter of the total grinding jar

time 30min

Before grinding After grinding Sample GraniteGrinding ball 10mm ball stainless steel

Sample characteristic Hard

AttentionGrinding jars should be symmetrical

placed, the sample should not be more than a quarter of the total grinding jar

time 15min

Before grinding After grinding Sample Pearl PowderGrinding ball 3mm ball ZrO2

Sample characteristic Brittle

AttentionAdd suitable liquid, ball, sample,

the liquid do not more than3/4 of the grinding jar

time 6H

Before grinding After grinding Sample SludgeGrinding ball 10mm ball stainless steel

Sample characteristic Hard

Attention The sample must be dry

Grinding ball 35min

Product applicationApplication fleld:engineering/electronics, buildingmaterials, agriculture, pharmaceuticals, chemical synthetic materials, geological/metallurgy, environment/resourcesrecyding, glass/ceramics, biological Sample characteristic: soft, hard, brittle, fibrous, dry or wet sample Applications:plant material,cement clinker, concrete, compost, coatings and paint, charcoal, hair, catalyst, chemicals, metal, carbon fiber, paper, fiber products, cellulose,seeds, clay minerals, coke, coal, glass, waste electronic products, mineral, ore, limestone, gypsum, quartz, kaolin, bones, metal oxide, Iron ore,ceramics, polymers, bentonite/bentonite,pigment.

Work principle:MRC Planetary Ball Mill have twosuperimposed movement move the grinding jars, Like in a planetary system the grinding jar rotates on a orbit around the center, This rotational movements is the self-rotation of the grindingcontainer superimposed.The result centrifugal and actingacceleration forces lead to strong grinding effects . Furthermore there are forces working according to the Coriolis acceleration. The result is an intensive grinding effect between the grinding balls and the sample.There are different rotational ratios, with a rotation ratio of 1:-2 the grinding jar rotates twice during a sun wheel turn. The minus of this case indicate the opposite rotation direction.

The design of single-button control is used for PBM-6control panel.

Technical highlights:The planetary ball mill can reach high fineness of grind. It can not only perform mixing and grinding, but also meet the requirements of colloid grinding. n addition,Its giant energy input can meet the technical requirements of preparing alloy with mechanical methods.The planetary ball mill series have one, two or four grinding platforms for you to choose from.The grinding parameters can be set depend the characters of samples. The grinding jars are made of high-quality materials, and the materials are various. various filling combinations can be selected for the number and size of grinding balls to make planetary ball mill perform personalized setting and adjustment as per specific smashing and grinding requirements as well as realize repeatability for grinding results.Speed ratioThe work principle of planetary ball mills is based on the relative rotational motion of a sun wheel and grinding jar. Speed ratios have direct impacts on the size of energy Inputs and grinding effects. We can perform customizeddesign and production from 1:1to 1:-3.5 depend on the requirements of our customers.

The LCD can clearly display parameter settings, which makes It easy to operate.

11

MILLSPlanetary Ball Mill

Performance and advantage:● High efficient fine grinding up to end fineness <1um● With 4 grinding platforms can process 2,4,8 samples simultaneously (PBM-4)● Grinding jars have 6 kinds of material, the volume various from 12ml-500ml● Suitable for long-ter m trials and continuous use● Reproducible results due to program grinding parameters● Automatic direction reversal to avoid agglomerations● Grinding chamber automatic ventilation system for grinding jar of cooling.

Efficient, safe and easy operation:Efficient, maintenance-free drive is used for planetary grinders so as toguarantee the machine can maintain constant speed in continuousoperation for a long time or under maximum load. During the milling, built-in high-power fans can automatically provide effective cooling for motors. Ergonomics design and it is quite comfortable and safe to operator. The intelligent safety lock not only provides various applications but alsoguarantee operator security. The user-friendly programming facilitates the setting of grinding start time; therefore, tests can be operated automatically without the monitoring ofoperators. MRC has specially designedjar-opening tools for the grinding jars of planetary ball mill series. The user-friendly design makes the jar open easy and safe.

Grinding jars filling guide:Grinding jar PBM-4/6 The recommend grinding ball and quantity

Volume Sample quantity Feed Size 10mm 20mm 30mm 40mm50ml 5-20ml <3mm 10pcs 2pcs - -

80ml 10-35ml <4mm 25pcs 4pcs - -

125ml 15-50ml <4mm 30pcs 6pcs - -

250ml 25-120ml <6mm 60pcs 13pcs 6pcs -

500ml 75-225ml <10mm 100pcs 22pcs 9pcs 5pcs

Model PBM-4 PBM-6Transport data

Package size 1011x897x811mm 898x784x700mm

Instrument size 759x645x550mm 650x470x435mm

Gross weight 206kg 120kg

Net weight 158kg 75kg

Technical dataPower supply 220V , 50-60HZ

Nominal rating 1500W 750W

Performance dataWork principle Impact, friction

Feed size Less than 10mm

Final fineness approx. 1um (0.1µm for colloidal grinding)Grinding time setting hour : 0~99 , minute: 0~59 , repeat: 0~99

Speed ratio 1:-2.3 1:-2Sun wheel speed 30~400rpm 100~650rpm

Effective sun wheel diameter 360mm 260mmGrinding jar volume option 12m , 25ml, 50ml, 125ml, 250ml, 500ml

Grinding jars performance:● Safe and easy operation● The grinding jar have various kinds of materials to meet different requirement● The base have safety positioning system, center position, ensure the grinding jar no sliding during the milling● The 0-ring can guarantee the dust -prevention● Agate,sintered aluminum oxide, zirconium oxide,tungsten carbide grinding jar have stainless steeljacket● There is mark on the grinding jar with the materialand the rated capacity, easy to distinguish.

The planetary ball mill series not only apply to dry grinding, but also wet grinding such as colloid grinding. The grinding jars are equipped with safe closure device for gas-tight handling inside and outside of glove boxes.Ventilation lid are mainly used for protecting the inert gases generated inside grinding jars; the safe airtight devices can guarantee the high-levelgas tightness inside grinding jars so as to ensure that the grinding result is not affected.

Temperature and pressure measuring systemIn order to better grinding and analyze the condit ions inside the grinding jars(e.g. chemical reactions, phase changes, etc.), it is necessary to acquire two major thermodynamic parameters: temperature and pressure forrecords.

12

Model DMP-100

Material feed size <20mm

Final fineness <100µm

Gap width setting continuous, 0.1 - 5 mm

Drive 3-phase 380V geared motor 50-60Hz

Speed 470rpm

Drive power 1.5kW

DMP-100

DMP-100, Disc Mill

It is robust design, and suite for for batch or continuous fine grinding of very hard, hard-abrasive’l hard-brittle, medium-hard solids and for metal-free grinding.

Disc MillMILLS

Advantages: ● The operation is simple, easy to clean ● The grinding disk has long service life ● A variety of material selection of grinding disc ● Continuous adjustable clearance of grinding disc ● Large amount of sample processing ● Large size of sample feed, up to 20 mm ● High efficient in sample processing, can achieve small discharging granularity ● Within short period of time.

Application: Mining and metallurgy, ceramics industry, rocks and soils, glass industry, soil research...

Work principle:The feed material is milled by a rotated grinding disc and the other fixed disc. The moving grinding disc rotates against a fixed one and draws in the feed material. The necessary comminution effects are generated by pressure and frictional forces. The progressively arranged grinding disc meshing first subjects the sample to preliminary crushing; centrifugal force then moves it to the outer regions of the grinding discs where fine comminution takes place. The processed sample exits through the grinding gap and is collected in a receiver.

13

MILLSKnife Mill

HOM-100HOM-100, Knife MillThe knife mill HOM-100 is used for process the soft, medium-hard, brittle and fibrous sample. Special for high water, oil or fat content sample.

Sample comparison before and after grinding:Sample picture Parameter

Before grinding After grinding Sample PorkSpeed setting 6000rpmSample characteristic High oil & fat

Attention The feed size must be less than 2- 3cmtime 30s

Before grinding After grinding Sample ChivesSpeed setting 5000rpmSample characteristic tough, fibrous

AttentionThe feed size must be less than

4-5cm, use the Gravity lld

time 1min

Before grinding After grinding Sample CabbageSpeed setting 4000rpmSample characteristic Brittle

AttentionThe feed size must beless than

5-6cm, use the Gravity lid

time 1min 30s

Before grinding After grinding Sample Coffee beanSpeed setting 7000rpm

Sample characteristic hard, high fat

Attention Reverse first & then forwarddirection grinding, use the gravity

Grinding ball 3min

Product applicationApplication fleld: milling ,homogenizing & mixing. Sample: soft, medium-hard, elastic, fibrous, high water, oil or fat content sample and dry sample. Application sample:agriculture: graln, animal food and so onBiology: mouse tissues. plant leaf, seed,

Work principle:The HOM-100 has two-blade knives at the center of the bottom of a grinding cup. A certain height gap is keptbetween such knives. Driven by a motor of 1,100W, the knife start rotating.Reliable crushing and homogeneous phase effects are generated via the cutting of the sharp steel knife edges. As per the rotating directions, the blunt side can be selected for coarse grinding of bulk samples or the tough side can be selected for fine grinding of samples.The motor speed is electronically controlled and can be preset. The constant speed guarantees efficient and high-quality grinding homogenization. You Just need 10 to 30 seconds to process samples that are usually hard to crush and get homogenized samples for analysis.

embryo and so onFood: vegetable, pork, Quick-frozen food, cocoa, candy, preserved fruit, candled fruit, cooked meat products, etc.

Major accessories:1. Grinding container autocalavable plastic. High temperature and high pressure sterilization. containers, meet strict hygiene standards of food and drugs under test conditions. Suitable for process soft, oll, water, fat and fibrous sample. 2. Grinding container stainless steel. Applied for granules, shell grainsample Suitable for process medium-hard, brittle, tough sample. 3. Gravity lld. The gravity lid is suitable for process small quantity sample: include the oil, fat ,low-water, dry sample. Put the gravity lid on the grinding container, before the milling,the sample volume Is bigger, but the volume will be smaller during the milling. The gravity lid can decline depend its own weight gradually to press the grinding chamber, so that the sample will be processed in a more smaller space to increase the grinding effect.

4. Gravity lid PP with overflow channels. Gravity lid PP with overflow chan-nelsIs suitable for grinding high-water fresh fruits, vegetables and other samples. In the process of grinding, the water in grinding container is gradually increased, when the water reaches the overflow hole position, the stream along the hole back into the ground at the bottom of the cup inside, thus avoid the water overflow and Improves the grinding homogenization effect of the sample. 5. knife of titanium ---for grinding without heavy-metal contamination. 6. Knlfe--2 blade, stainless steel, turn serrated knife.

14

MILLS Knife Mill

Recommend grinding parameters:

Sample Quantity (g) The feed size Speed (rpm) Time (s) Remark

Cabbage 100 30~40 4000/8000 60 First use the manual mode, then the constant mode

Chives 80 20~30 5000 60

Candied date 50 5 5000 40 Use dry ice

Fruit cake 50 5 5000 45 Use dry ice

Sweetend roll 60 5 5000 30 Use dry ice

Casing 50 10~20 8000 20

Pork 100 20 8000 30

Fish 100 10~20 8000 30

Peanut 100 8000 30

Sesame 80 7000 30

Mung bean 120 8000 45

Coffee bean 120 10~20 7000 30

Chili 60 20~30 7000 20

Corn 100 8000 30

Pepper corn 120 7000 45

Cacao beans 100 6000 30

Potato 180 20~30 7000 30

Tomato 200 20~30 7000 15

Apple 150 30 6000 20

Mushroom 180 20~30 8000 25

Carrot 200 20 8000 20

Cheese 150 20~30 6000 30

Fig 120 20~30 8500 20

Performance advantage:● Strong motor power, 100w, adjustable speed● The sample volume up to 700ml● The accessories is autoclavable● Option interval mode, regular mode, impact in reverse mode● Coarse grinding and fine grinding be realized one pace● Various material of the grinding container● Simply operation, quickly start.

Professional grinding equipment, superior to the ordinary:Ordinary laboratories use household agitators. However, it is hard for such agitators to process many samples such as meat with skin, chewing gums, zongzi, cured meat, soft sweets and soybean, and homogenized samples cannot be made by using such agitators. It is quite easy for a HOM-100 crusher to grind such samples; in addition, good repeatability and reproducibility can be acquired. Using HOM-100, the homogenization of the sample within 30 seconds is quite high, and the standard deviation of the analysis result for the sample ismuchlower than that use the household agitator. Multiple available containers and lids make it be must-have inprofessional laboratories.

Model HOM-100

Speciality

Work principle milling, homogenizing and mixed

Application field Agriculture, biology, food, medicine/drug

Sample characteristic Soft, medium-hard, elastic, fibrous, water, oil, fat & dry sample

Technical data

Feed size Approx. 10-40mm

Final fineness < 300µm

Number of blades 2

Time setting digital, 1s - 3 min

Batch quantity 50-700ml

Interval mode Yes

Drive power ~900w

Power supply 200-240V, 50-60Hz

Motor speed 2000-10000rpm

Motor power 1100W

Transport data

Package size 52x50x64cm

Instrument size 34x25x52cm

Gross weight 22kg

Net weight 18kg

Technical data:

15

MILLSContinuous, Cutiing Mills

Model CM-5000 CM-20,000

Mesh(m/m) 20,40,60 (option: 10,14) ≤0.5,1,2

Inner cutting put Ø5cm Ø20cm

Cap. 5kg/H 20kg/H

Motor 200W 750W

Size(mm) W210xD290xH240 W350xD580xH1100

Power AC110V/220V, 50/60Hz

CM-5000

The CM-5000 & CM-20,000 are economically powerful cutting mills that are particularly suitable for size reduction of soft, medium-hard, elastic or fibrous materials, whose size can be reduced without requiring the use of extremely high forces.Function Principle: Size reduction in the cutting mill CM-5000 takes place by cutting and shearing forces. The sample passes through the hopper and into the grinding chamber where it comes into contact with a rotor equipped with 4 cutting blades; it is comminuted between the blades and the four stationary cutting bars inserted in the housing. The chamber dwell time is short; as soon as the sample can pass through the openings of the bottom sieve it is discharged and collected in the receiver. it ensures gentle, rapid and nearly dust-free size reduction. ground product is quickly discharged by using a filter bag or a ring filter.

CM-5000/CM-20,000, Cutting Mills

CM-20,000

Sieves:

Optional Knives

CM-20,000

Main areas of Applications: Electronic cards, cables, computer & electronic waste, plant materials, plastics, rubber, spices, wood, drugs, feeds, foils, leather, light metal scrap, lignite, non-ferrous metals, organic & inorganic waste, paper, straw, secondary fuels, grain, seeds, resins, textiles and bones.

Features:● Rapid and gentle size reduction of dry materials. ● Defined final fineness by using of bottom sieves.● The samples subjected to low thermal stress.● Nearly dust-free comminution.● Applications - size reduction by cutting.● Field of application - agriculture, biology, chemistry/plastics, construction materials, environment, food, medicine/

Sieves

Sieve

Benchtop cutting mill

Sieve

pharmaceuticals, mineralogy/metallurgy soft, medium-hard, elastic, fibrous.● Feed material - soft, medium-hard, elastic, fibrous.● Size reduction principle - shearing, cutting.● Material feed size - Ø50mm.● Final fineness - 0.25-20mm.● Sieve sizes - 0.25mm, 0.42mm, 0.84mm.● Quick & easy cleaning.

Floor cutting mill

Sieve

16

MILLS Continuous, Cutting Mills

PCM-200

● Rapid reduction of large particles from 80 mm to 0.25 mm ● Quick and easy cleaning ● Full range of bottom sieves ● Collector volume 5,000 ml ● Digital speed setting.

PCM-100, PCM-200, Power Cutting Mills

Method of operation: The Models PCM-100/200 Cutting Mills is used by Laboratories & Processing Companies to granulate solid materials such as waste of wood and thermoplastics. The material to be processed falls into the cutting chamber of the mills via an upper chute and is shredded by cutting between rotating and fixed knives until it passes an attached sieve as ground product. The sieve extends over the lower half of the grinding chamber and is easily exchanged. Final particle size is determined by the selected sieve perforation aperture. No other Cutting Mill is easier to clean then the PCM-100/200 Cutting Mills. When the grinding process is finished the front door can be opened sidewise and the rotor / infeed hopper can be taken out in order to perform a fast and systematic cleaning of the grinding tools.

Applications: ● Linoleum, Carpets, Cloth ● Secondary fuels and Bio Mass ● Food & Animal food ● Wood, Paper, Carton, Cellulose ● Rubber, Shredder Light Fractions ● House Waste, Industrial Waste ● Computer Scrap and Electronic Scrap ● Plants, Twigs, Roots etc. ● Herbs, Spices, Gras, Straw ● Bones ● Technical Plastics such as ABS, PAs POM, PE etc.

Grinding before/after:

Massive grinding chamber made from vibration reducing components

Acoustic Noise Reduction Infeed Hopper made from Bondal. Bondal is a vibration damping composite material with a sandwich structure consisting of a viscoelastic core between two outer steel sheets. Various in-feed hopper types are available with wood-en / teflon plunger.

Solid door with safety switch for easy access and cleaning

Solid 5 Liters sample collector High precision solid steel under frame with industrial caster wheels (lockable)

Infeed Hopper of var. sizes:

Rotor and Stator knifes: Technical Data PCM-100 PCM-200Electrical details 230V/50 Hz

Speed 150-3000 rpm 500-3000 rpmMotor Power 1500watt 3000watt

Features/Performance PCM-100 PCM-200Working principle Cutting

Feed size maximum Up to 80mm depending on sampleQuantity max. / min. 5000ml/50gr.

Final product size 250µmNumber of rotor knives 3Number of stator knives 4

Start/stop function by on/off buttonEnd fineness adjustment by Interchangeable bottom sieves

Weight 68 kg without under frame 90 kg with under frame

PCM-100

Optional: 6 Disc Rotor

Sieves Cuter Blade Rotor

Before:

After:

700rpm 1.0mm

Dog chews

1380rpm 6.0mm

Rubbercow leather

700rpm 1.0mm 1380rpm 6.0mm

Plastics

1380rpm 6.0mm

Plastics

FloorCuttingMill

17

MILLS

Model RJM-102Speed 0~600rpmTimer 99hours: 59min

Pot size 12cm~30cmMotor 300W

Outline Size (mm) W100xD410xH380Power AC110/4A AC220V/2A

Features:● Digital Large Ball mill, 2 rollers.● Speed range: up to 600 rpm.● Pot diameter:120-300mm.● Roller length: 650mm, Max. load: 40kg accept couple of mill jars together.● Timer: up to 99 hours:59 seconds.● Dimensions: W97xD36xH41cm.● Power 400watt.

RJM-102Floor Ball Mill

RJM-102, Large Ball Mill

Roll Jar Mills

Model RJM-103Speed 0~600rpmTimer 99hours: 59min

Pot size Ø7~13cmMotor 400W

Outline Size (mm) W970xD410xH360Power AC110/4A AC220V/2A

Features:● Digital Large Ball mill, 3 rollers.● Speed range: up to 600 rpm.● Pot diameter:70-130mm.● Roller length: 650mm, Max. load: 40kg accept couple of mill jars together.● Timer: up to 99 hours:59 seconds.● Dimensions: W97xD36xH41cm.● Power 400watt.

RJM-103Floor Ball Mill

RJM-103, Large Ball Mill-3 Adjustable Roller

Model RJM-30DSpeed 0~480rpmTimer 99hours: 59min

Pot size 6.5cm~8.5cmRoller Ø50mmMotor 60W

Outline Size (mm) 550x310x220Power 220V/50Hz

Features:● Fixed speed & stepless speed change.● Digital speed meter is available.● Suitable for different size mill pots.● Roller distance can be adjusted.● Timer can be added separately.

RJM-30DBenchTop Small Ball Mill

RJM-30D, Small Ball Mill

The unique operating characteristics of our Jar mill satisfy the most requirements of the chemical, ink, paint, plastics, food and pharmaceutical industries. Our jar mills are ideal for R&D, small production runs, for grinding laboratory or high-purity samples. These mills provide quiet and smooth operation. ● Single or multi-tier design, two or three jars per tier ● No cross-contamination between samples ● Easily adjustable rollers and brackets to accommodate different jars of various diameter ● The speed can be varied ● Position adjustment for roller for different diameters of jars.Rollers easily adjust to accommodate a variety of jar diameters—no clamping or fastening required.

A horizontal cylinder is rotated at a predetermined speed that sets the balls into a tumbling and cascading motion which impact the solids in a very predictable and controllable fashion. Because the process takes several hours, the particles will not only be finely milled, but will exhibit a narrow particle size distribution.They are used widely in the chemical, paint, coatings, and ceramics industries.

Ball mill is a grinder for reducing hard materials to powder. A ball mill grinds material by rotating a cylinder with balls causing the balls to fall back into the cylinder and onto the material to be ground. The cylinder rotates at a relatively slow speed, allowing the balls to cascade through the mill base, thus grinding or dispersing the materials. Ball mills are generally used to grind material 7mm and finer, down to the particle size of 20 to 75 microns.

18

MILLS

Model RJM-304

Speed (RPM) 0~420

Pot size (cm)/DIM Ø9~Ø24

Roller Ψ (cm) Ø5

Motor 400W

Timer (hrs) 0.1~99.9

Outline size (cm) W142xD68xH182

Power AC220V, 50/60Hz

RJM-304, Large Ball Mill, 3 Stages

RJM-304

Size(mm)Total Cap.Useful Cap.Speed

rpmModel

Ø120x150800500130Mill pot 4

Ø150x1801,6001,000110Mill pot 5

Ø180x2102,8002,00090Mill pot 6

Ø210x2404,5003,00085Mill pot 7

Ø240x3007,5005,00075Mill pot 8

Ø300x36015,50010,00060Mill pot 10

Balls for Mill Pot

Recommendations for ball fillings

Mill pot no. Capacity approx. ml.

Ball Ø

42K-99mm

42K-1515mm

42K-2020mm

42K-3030mm

4 500 0.05kg 0.1kg 0.1kg

5 1000 0.1kg 0.2kg 0.2kg

6 2000 0.2kg 0.4kg 0.4kg

7 3000 0.3kg 0.6kg 0.6kg

8 5000 0.5kg 1.0kg 1.0kg

10 10000 0.5kg 1.5kg 1.5kg 1.5kg

No. of balls per kg approx. 425 pcs. 130 pcs. 90 pcs. 16 pcs.

Bulk density of balls per Liter approx. 1885g 1930g 2000g 1800g

Mill Pots

Roll Jar Mills, Mill Pots, Balls

● High efficiency – Due to the relatively slow rotational speed but large mass of media, more of the energy goes into milling and less wasted as heat.● Narrow particle distribution – Solids milled in tumble mills are normally so fine and consistent in size that it’s rare to require classification.● Repeatable results – Mill operating parameters including rotational speed, media size and milling duration can be independently controlled with known effect on the final results.● Low temperature – Because of the high efficiency of milling and low heat generation, the solids will not be exposed to high temperatures. For extremely heat sensitive products, cooling jackets can be provided on the mill cylinder.● Chemical containment – Solids are sealed and contained inside the mill, protecting the environment and operators.

19

MILLSContinues

Model CGM-20Speed 30,000 RPM

Weight 14kg

Dimensions(mm) W320xD300xH530

Power AC110V/220V, 50/60Hz, 2Hp

CGM-20Features:● Mineral substances, fiber and adhesive substances.● Wind is used to cool the grinder for continuous operation.● Size of particles: 150 mesh & above.● Ordinary herbal medicine: 0.6kg per 10 minutes.● Adhesive substances: 0.6kg per 15-20 minutes.

CGM-20, Leading-Coming-Air Grinder

InsideBack

Model CCM-20 CCM-15 CCM-10Speed (rpm) 3600

Type Floor cut mill Table cut mill

Motor 2HP 1.5HP 1HP

Weight (kg) 85 70 25

Cap size (mm) W240xL120 W180xL100 W70xL110

Power 220V, 50/60Hz 110V/220V 50/60Hz

Features:The vertical crushing machine uses the traditional grinding method to break the sample. It’s designed to use the centrifugal force of the motors tungsten carbide blade to achieve high crushing efficiency. Input volume is adjustable. It is suitable for laboratory purpose.

CCM-10

CCM-15/20

CCM-10/15/20, Vertical Crushing Machine

Sieves:Interchangeable sieves for insertion into the grinding heads ensure maximum particle size filtering.

Sieves included0.3mm 2pcs.0.4mm 1pcs.0.5mm 1pcs.3mm 1pcs.8mm 1pcs.13mm 1pcs.

● Suitable for fine grinding and coarse crushing. Not to be used with wet, greasy, sticky, fibre rich materials.● Continuous operation.● Easy replacing mesh sieves.● Up to 6 different mesh sieves● Grinding particle size. Not bigger than 30mm.● Size after grinding 0.3 - 13mm.

Sievesincluded:

● Capacity 3-5kg/hour.● Power supply, NH-34-34S: AC100V 50/60Hz NH-20/3 phase 200V.● The processing hammer is made of Tungsten.● Stainless steel tank, inner funnel aluminium, outer funnel stainless.● Blades speed 3600 RPM.

Knivesincluded:

Knives included 12-4, Center

12-1, Straight bladeUse for the materials in general, fiber, & tough quality such

as pearl, gentian & liquorice

12-3Big curve blade

Use for the materials in powder, fiber, & viscosity quality such as gentian & medlar

12-2Medium curve blade

Use for the materials that straight blade can not pulverize.Or when use the big curve blade but can not achieve the

tiny powder, use this blade

In

Out

In

Out

In

Out

12-4Center 12-3 12-2 12-1

MRC.12.16