SANUS RACKSCustomizable rack includes top and bottom cable slots with covers, front and rear adjustable depth threaded rack rails, and multiple 3U removable panels Removable, quick-release

SANUS RACKS

The Component Series AV racks were designed with high performance and structural integrity in mind. Heavy-gauge welded steel construction, swivel casters and height-adjustable feet ensure perfect leveling and stabilization on any surface. These solid racks come preassembled with shelves and blanking panels for the ultimate in convenience.

Component Series RacksFOR ALL YOUR AV GEAR / FULLY CUSTOMIZABLE

MODEL CFR2136 36U Component Rack 70.5" Tall AV Rack

Strong and sturdy construction with heavy-gauge welded steel

Customizable rack includes top and bottom cable slots with covers, front and rear adjustable depth threaded rack rails, and multiple 3U removable panels

Removable, quick-release side and back panels allow for easy access to components

Rack comes preassembled with shelves and blanking panels to simplify ordering and installation

Lockable, tempered glass front door can be placed on left or right of rack for added flexibility during installation

Convection cooling system allows warm air to escape through top as cooler air is drawn in through bottom of rack, keeping AV gear at the proper temperature

DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 70.5" 60 x 60 x 179.07 cm

DIMENSIONS (w x d x h) WITHOUT CASTERS 23.62" x 23.62" x 67.7" 60 x 60 x 171.96 cm

PRODUCT WEIGHT 177.7 lbs / 80.77 kg

WEIGHT CAPACITY 800 lbs / 363.64 kg

RACK SPACES 36U

PREASSEMBLED WITH: (2) 1U shelf, 30 lbs/ 13.6 kg. 15"/ 381 mm deep (6) 2U shelf, 50 lbs/ 22.7 kg. 18"/ 457 mm deep

PREASSEMBLED WITH: (2) 1U Blanking Panels (6) 2U Blanking Panels (3) Tie Bars

INTERIOR USABLE SPACE (w x d) 19.4" x 21.60" 49.28 x 54.86 cm

SANUS COMPONENT SERIES RACK ACCESSORIES 28COMPONENT SERIES RACKS 1

Table of ContentsCOMPONENT SERIES RACKS ..................................................... 1 – 2

COMPONENT SERIES RACK PLUS BUNDLES ...................................3

COMPONENT SERIES STACKABLE SKELETON RACKS ....................4

SANUS ECOSYSTEM™ ................................................................ 5 – 6

SANUS ECOSYSTEM™ BUNDLES ......................................................7

RACK ACCESSORIES ................................................................... 8 – 9

EURO SERIES RACKS .............................................................. 10 – 11

EURO SERIES RACK ACCESSORIES ................................................12

SANUS Component Series RacksFULLY CUSTOMIZABLE AV RACKS SHIP COMPLETELY ASSEMBLED AND READY TO ROCK.

PACKED TO PERFORM

Product packaging has been perfected to keep our racks protected so that they’re in perfect condition and ready to perform upon delivery.

• Expertly pallet banded for sound shipping

• 3-piece protective corrugate wrapping prevents damage

• Rigid inner base pallet supports entire rack during transport so casters and feet can be safely pre-assembled

• Sleeve design of box makes it easy to open and repack

ENGINEERED FOR GREATNESS

Our racks put your installation and organization concerns at ease.

• Single vent cutouts on top and bottom is easier than ever to remove

• Increased hole patterns on top, bottom and back panels make for easy installation of 1U, 2U and 3U devices

• Rearranged shelves and blanking panels create a sleek, completed look

MORE ON COMPONENT SERIES RACKS ON THE NEXT PAGE

The Component Series Stackable Skeleton Racks were designed with high performance and structural integrity in mind. The open design of these racks provides versatility for a variety of height combinations and mounting solutions with no loss of RU space when stacked. The racks include screws, removable shelves and blanking panels for easy assembly in just 15 minutes.

Component Series Stackable Skeleton RacksWALL MOUNTED OPTION / OPEN DESIGN

MODEL CFR1620 20U Stackable Skeleton Rack

15U Stackable Skeleton Rack

35" Tall AV Rack

26" Tall AV Rack

Modular, stackable structures can be coupled into five different height combinations: 40U, 35U, 30U, 20U, and 15U

Entire structure, complete with extra screws, levelling feet, removable shelves, blanking panels, wall mounting hardware, stacking kit, shelf straps and equiptment back stops ship in one UPS box

Quick and easy assembly in just 15 minutes

Versatile racks can be mounted directly to wall studs or concrete with included hardware, or can be used freestanding on included leveling feet

Modular rack structures are SANUS EcoSystem™ compatible

MODEL CFR1615

DIMENSIONS (w x d x h) 20.40" x 20" x 35" 51.82 x 50.8 x 88.9 cm

WEIGHT CAPACITY WHEN WALL MOUNTED 200 lbs / 90.7 kg

WEIGHT CAPACITY USING INCLUDED LEVELING FEET OR OPTIONAL CASTERS 600 lbs / 272.73 kg

RACK SPACES 20U

INCLUDED: (1) 1U shelf (2) 1U Blanking Panel (1) 2U shelf (25) rack mount screws (4) leveling feet

DIMENSIONS (w x d x h) 20.40" x 20" x 26.2" 51.82 x 50.8 x 66.55 cm

WEIGHT CAPACITY WHEN WALL MOUNTED 200 lbs / 90.7 kg

WEIGHT CAPACITY USING INCLUDED LEVELING FEET OR OPTIONAL CASTERS 600 lbs / 272.73 kg

RACK SPACES 15U

INCLUDED: (1) 1U shelf (2) 1U Blanking Panel (1) 2U shelf (25) rack mount screws (4) leveling feet

Component Series RacksFOR ALL YOUR AV GEAR / FULLY CUSTOMIZABLE

1U SHELF 2U SHELF

44U Component Rack

27U Component Rack

15U Component Rack

85" Tall AV Rack

55" Tall AV Rack

34" Tall AV Rack

DIMENSIONS (w x d x h) 19" x 15" x 1.75" 48.26 x 38.1 x 4.45 cm


DIMENSIONS (w x d x h) 19" x 18.2" x 3.5" 48.26 x 46.2 x 8.89 cm


MODEL CFR2144

MODEL CFR2127

MODEL CFR2115

LOOK FOR COMPONENT SERIES RACK BUNDLES ON THE NEXT PAGE

DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 84.75" 60 x 60 x 215.27 cm

DIMENSIONS (w x d x h) WITHOUT CASTERS 23.62" x 23.62" x 81" 60 x 60 x 205.74 cm

PRODUCT WEIGHT 240 lbs / 109.09 kg


RACK SPACES 44U

PREASSEMBLED WITH: (2) 1U shelf, 30 lbs/ 13.6 kg 15"/ 381 mm deep (7) 2U shelf, 50 lbs/ 22.7 kg 18"/ 457 mm deep

PREASSEMBLED WITH: (2) 1U Blanking Panels (7) 2U Blanking Panels (3) Tie Bars


DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 55" 60 x 60 x 139.7 cm


PRODUCT WEIGHT 129 lbs / 58.64 kg


RACK SPACES 27U

PREASSEMBLED WITH: (2) 1U shelf (2) 1U Blanking Panel (6) 2U shelf (6) 2U Blanking Panel (2) Tie Bars


DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 34" 60 x 60 x 86.36 cm


PRODUCT WEIGHT 113.8 lbs / 51.73 kg


RACK SPACES 15U

PREASSEMBLED WITH: (2) 1U shelf (2) 1U Blanking Panel (2) 2U shelf (2) 2U Blanking Panel (1) Tie Bar


SANUS COMPONENT SERIES RACK ACCESSORIES 28COMPONENT SERIES RACKS2 SANUS COMPONENT SERIES RACK ACCESSORIES 28COMPONENT SERIES STACKABLE SKELETON RACKS 3

ON-WALL SWING OUT ACCESSORY CASTER KIT

CFA16SM

Allows a CFR1615 or CFR1620 Component Series AV rack to

mount and swivel on wall

CA6CK- 4 Casters

Provides smooth rolling for CFR1620 and CFR1615

Component Series AV Racks

SANUS COMPONENT SERIES RACK ACCESSORIES 28SANUS ECOSYSTEM™4

SANUS EcoSystem™

MULTI-VOLT SYSTEM SAVES SPACE AND TIME

SANUS COMPONENT SERIES RACK ACCESSORIES 28SANUS ECOSYSTEM™

The SANUS EcoSystem™ is a fully customizable accessory that serves as the single power source for all low-voltage equipment in a rack. The multi-volt power supply features regulated 12 Volt DC and regulated 5 Volt DC power ports. Switches on the front control master power, as well as front and back lighting ports. A thermostat probe that controls output ports for cooling fans is included. Along with the available LED lights and fan accessories, use the power cord accessories to connect and power all other compatible low voltage devices and get rid of all those transformers.

AFTERBEFORE

Remove ThisFrom Your Rack

5

SANUS EcoSystem™

COMPONENT SERIES / RACK ACCESSORIES

MODEL CAPT01 Multi-Volt Power Supply

MODEL CALT01 1U Task Light MODEL CALW01 Work Light, 2-Pack

MODEL CAFC01

MODEL CAFQ01

1U Component Cooling Fan Kit

3U High Volume Fan Kit

MODEL CAPW03, CAPW06, CAPW09

MODEL CAFH01

Power Wires

3U Ultra Quiet Fan Kit

5V USB PortsEasily connect up tothree componentswith USB cables

12V Lights OnlyEasily connect up tothree componentswith USB cables

Always On 12V PowerFor network switches, routers, modems, NAS drives, media boxes, control processors, baluns, etc.

Thermostat ControlledKeep components cool with available fans, which include 1U ultra quiet fan, 3U ultra quiet fan and 3U volume fan

ThermostatIncluded thermostat kit monitors the rack temperature and automatically activates fans

Additional PowerFront side 5V USB port, 12V always on and front light connections provide added convenience

Light SwitchesEasily turn front task light and rear work light on and off

Rack accessories allow you to build your own rack or add to a current rack for a customizable solution to meet your exact needs.

Rack AccessoriesCOMPONENT & STACKABLE SKELETON RACK ACCESSORIES

SANUS COMPONENT SERIES RACK ACCESSORIES 288 RACK ACCESSORIES

POWER ACCESSORIES

CAPC01Rack Mount Surge Protector

and Power Conditioner

CAPS12Vertical Surge Protector and Power Conditioner

CAPS27Vertical Power Strip

CAPT01Multi-Volt Power Supply

SHELVES AND DRAWERS

CASH21, CASH22, CASH231U, 2U, 3U Vented Shelf

CADR22U Economy Sliding Drawer

CADR44U Economy Sliding Drawer

CASS10Shelf Stops

TIE BARS, WIRE TIES & LACING STRIPS

CATB010-B1Offset Tie Bar

CATBL21019" L-Shaped Tie Bars

CALS45Lacing Strips

CACT100Wire Ties

SCREWS

CASC500500 Extra Screws



Fits Component Series AV Racks

Fits all Component Series AV Racks



Rack AccessoriesCOMPONENT & STACKABLE SKELETON RACK ACCESSORIES

SANUS COMPONENT SERIES RACK ACCESSORIES 28 9

SMALL PARTS PANEL KITS

BLANKING PANELS

CASBP11U Steel Flat Blanking Panel



CAVBP11U Flanged Steel Vent Panel



CAGKGanging Kit

CALKSide Panel Lock and Keys (2)


Fits CFR2144, CFR2136, CFR2127, and CFR2115Fits all Component Series AV Racks

CASPK

Create easily accessible and secure storage space for small AV

components on the side

RACK ACCESSORIES

The Euro Series AV racks create a clean, modern look while featuring a modular design that can easily be expanded to fit any AV system. Wire management clips secure loose cables for an organized appearance, and adjustable casters ensure the units are always stable and aligned, even on uneven surfaces.

Euro Series RacksMODULAR DESIGN / CUSTOMIZABLE

MODEL EFAV40 AV Base and Shelves

Fully customizable modular design

Solid steel construction provides strength and support

Open design allows airflow to keep components cool

Includes clips to secure loose cables

DIMENSIONS (w x d x h) 40.50" x 20.45" x 22.87" 102.87 x 51.94 x 58.09 cm

TOP SHELF DIMENSIONS (w x d) 40.5" x 20.5" 102.87 x 52.07 cm

TOP SHELF CAPACITY 125 lbs / 56.82 kg

MIDDLE SHELF DIMENSIONS (w x d) 40.5" x 20.5" 102.87 x 52.07 cm

MIDDLE SHELF CAPACITY 125 lbs / 56.82 kg

BOTTOM SHELF DIMENSIONS (w x d) 40.5" x 20.5" 102.87 x 52.07 cm

BOTTOM SHELF CAPACITY 125 lbs / 56.82 kg

Audio RackMODEL EFA31




MIDDLE SHELF DIMENSIONS (w x d) 22.48" x 20.5" 57.1 x 52.12 cm

MIDDLE SHELF CAPACITY 80 lbs / 36.36 kg

BOTTOM SHELF DIMENSIONS (w x d) 22.48" x 20.5" 57.1 x 52.12 cm

BOTTOM SHELF CAPACITY 80 lbs / 36.36 kg

SANUS COMPONENT SERIES RACK ACCESSORIES 28EURO SERIES RACKS10

Audio Expansion Shelf

Audio Base

MODEL EFAVS

MODEL EFAB

AV Base & Shelf

AV Shelf

MODEL EFAVB

MODEL EFAS

SANUS COMPONENT SERIES RACK ACCESSORIES 28 11




DIMENSIONS (w x d x h) 22.48" x19.47" x 8.71" 57.1 x 49.45 x 22.12 cm






EURO SERIES ACCESSORIES

Euro Series Accessories

SHELF SIZE 22.5" x 20.5" 57.1 x 52.1

Works with EFAS expansion shelf and select Euro Series accessories

DIMENSIONS (w x d x h) 22.5" x 22" x 3.8" 57.1 x 55.9 x 9.6 cm

MODEL EFAP21 Pull-Out Base

Rack rail conversion kit

For use with Euro Accessory Model EFP12

Caster Kit Wire Management Clips

Extended-Height Pillars for audio base (model EFAB) or video stand (model EFAV) EFP18 includes rack rail conversion kit (4 pillars and two rack rail wraps)

EFR12 CK2 EFWMC

MODEL EFP18, EFP12, EFP5

EFP5EFP12EFP18

LEARN MOREm.sanus.comwww.sanus.com

© 2015 Milestone AV Technologies, a Pritzker Group Company. All Rights Reserved. SANUS and the SANUS Logo are registered trademarks of Milestone. All other brand names or marks are used for identification purposes and are trademarks of Milestone.

All patents are protected under existing designations. Other patents pending. All information and designs contained are proprietary property of Milestone AV and may not be reproduced without express written consent of Milestone AV Technologies.

[email protected] | PHONE 800.359.5520 | FAX 651.636.0367

SanusSystems SanusSystems Sanus

1015

SANUS products are proudly designed and

engineered in the USA. We strive to offer you

safe products that provide a joyful experience

while also enhancing your lifestyle.

Visit www.sanus.com for details

Documents

SANUS RACKSCustomizable rack includes top and bottom cable slots with covers, front and rear adjustable depth threaded rack rails, and multiple 3U removable panels Removable, quick-release