SAP 47EE Inst Guide

Sap R/3 4.7 EE Installation Procedure

SAP R/3 4.7 EE INSTALLATION PROCEDURE(Author: Mahendar Bolla)

System requirementsRAM > 512 MB (Preferred 1.0 GB)Hard Disk (HDD) > 120 GB (Can be installed on a 80 GB HDD also, but

20GB External HDD is required for SAP-R/3 DUMP)Processor > 2.4 GHz

Start Win 2000 / 2003 Server Setup using Win 2000 / 2003 Server Bootable CD

Note: Win 2000 / 2003 Professional CD not to be used

CREATING PARTITION ON HARD DISK DRIVE: Create 3 partitions (in case of 80 GB HDD, create 2 partitions)

C:\ Any size between 9,000 MB to 10,000 MBD:\ Any size between 65,000 MB to 70,000 MBE:\ Remaining Disk Space (in case of 80 GB HDD, E:\ will not exist)

We will use –C:\ To install Operating System (OS) i.e. Win 2000 / 2003 ServerD:\ To install SAP R/3 4.7 E:\ SAP R/3 DUMP. (In case of 80 GB HDD, E:\ will not exist)

(After completion of SAP-R/3 installation, SAP-R/3 DUMP can be deleted from E:\ and the disk space can be used for personal use)

OPERATING SYSTEM INSTALLATION ON C:\ Install Win 2000 / 2003 Server in C:\Give Computer Name STARR3 (Any of your choice)Note: Enter any Computer Name of your choice, remember the name will be required towards the end of SAP R/3 installation, after GUI installation

FORMAT D:\ and E:\Complete NTFS format on D:\ and E:\

SAP R/3 DUMP transfer to E:\After Win 2000 / 2003 Server Installation and formatting disk is completed. Create a folder in E:\ called DUMP (i.e. E:\DUMP)Copy all 3 DVDs (DB1 to DB3, Ker, Oracle817, OraPatches, etc) to E:\DUMP (In case of 80 GB HDD, copy 3 DVDs to the 20 GB External HDD)SAP R/3 s/w installation will be done from this E:\DUMP folder (Source folder).

Sap R/3 4.7 EE Installation Procedure Mahendar Bolla1


CHANGE SYSTEM YEAR TO INCREASE THE SAP R/3 EXPIRATION:

Advance (increase) the System Year by 4-5 years ahead of the current (installation) year. This is done to increase the SAP R/3 s/w expiration year.

For example if current year is 2006, advance the year to say 2010.

After SAP R/3 installation is complete bring back the system year to current year. i.e. change it back from 2010 to 2006

VIRTUAL MEMORY SETTING:

1. For Win 2003 Server - Right Click on My Computer (Desktop) Properties System Properties Advanced Tab Under Performance, click Settings On Performance Options screen, go to Advanced Tab Click Change

Select C:\ Select Custom Size Initial size (MB): 1000Maximum size (MB): 1500

Click Set OK OK

Select D:\ Select Custom Size Initial size (MB): 2500Maximum size (MB): 2550

Click Set OK OK



VIRTUAL MEMORY SETTING (Contd.)2. For Win 2000 Server - Right Click on My Computer (Desktop) Properties System Properties Advanced Tab Performance Options Change


Settings for -Win 2003 Server


Select Drive C:\Initial size (MB): 1000Maximum size (MB): 1500

Click Set OK OK

Select Drive D:\Initial size (MB): 2500Maximum size (MB): 2550

Click Set OK OK



NETWORK ADAPTER INSTALLATION AND SETTING IP ADDRESS:

1. For Win 2003 Server - Click on Start Settings Control Panel

In the Control Panel window select Add Hardware Follows screen shorts





Now Click Next FinishNetwork Adapter installation complete.

Setting IP Address (for Win 2003 Server): Right Click on ”My Network Places” icon (On Desktop) Click Properties Right Click on “Local Area Connection – Microsoft Loopback Adapter”

Click on Properties In the Local Area Connection Properties screen General Tab Select

Internet Protocol (TCP/IP) Click Properties In the Internet Protocol (TCP/IP) Properties screen Select Use the

following IP AddressIP Address: Enter your IP Address or 200.200.200.0

or 192.168.10.10 or 192.168.12.1Subnet mask: 255.255.255.0



System gives a message that “DNS list is empty” Just Press OKIt will take some time to finish.

NETWORK ADAPTER INSTALLATION AND IP ADDRESS (Contd.)2. For Win 2000 Server - Click on Start Settings Control Panel

In the Control Panel window select Add/Remove Hardware


ERP, 01/03/-1,

Click Next




Now Click Next FinishNetwork Adapter installation complete.

Setting IP Address (for Win 2000 Server): Right Click on ”My Network Places” icon (On Desktop) Click Properties Right Click on “Local Area Connection – Microsoft Loopback Adapter”

Click on Properties, then you will get below screen -



System gives a message that “DNS list is empty” Just Press OKIt will take some time to finish.



CHANGE usr Folder’s Properties in Win 2003 Server (No change required in Win 2000 Server)

Using Windows Explorer Go to C:\ Select folder usr Right click on folder usr Properties Security Tab make sure for each “Group or User Names” all “Permission for Administrators” are Allowed (every box is checked under “Allow”)



ORACLE INSTALLATION:

For SAP-R/3 Version 4.7 Oracle 8i will be installed

For SAP-R/3 Version 4.7Go to Path: E:\ DUMP\Oracle817\NT\I386\setup.exe (where E:\ DUMP\ is the location where the installation s/w for SAP-R/3 4.7 is available)

Double Click on Setup.exe Click Next

Oracle Universal installer screen will appear.

Important Note: Destination Path: Must be set to drive where SAP-R/3 s/w needs be installed (in this case set to D:\ drive). Change only the drive specification, do not change any destination folders. (The screen shot destination is different – not to be confused, it is only to show how the screen looks like).



Click Next



Select Oracle8i Enterprise Edition 8.1.7.0.0 (1st option) Next Select Typical Installation (by Default) Next

Enter Global Database Name: ORANote: Automatically it will take SID: ORA (Do NOT change it)

Click Next Install

It will take 15-20 minutes to install

Once Oracle Database installation is completed – Dialogue Box will come –“Database Creation Complete” Click OK

Reboot System now



Installing Oracle Patches (This was not taught by Venkat Rao)

Go to Services



Stop All Oracle Services those are started



Click All Next



JAVA INSTALLATION:

From E:\DUMP – (where E:\ DUMP\ is the location where the installation s/w for SAP-R/3 4.7 is available)

Double Click on j2sdk-1_4_2_06-windows-i586-p.exeORDouble Click on j2sdk-1_4_2-nb-3_5_1-bin-windows.exe

* Check the file name, there will be only one JAVA installation file *

Next Accept C:\Program Files\j2sdk (Needs to the same drive where OS is installed) Next YES Next (Do not enter any Server or any information, just leave them blank) Next Finish

Note: In case of any error – At least one system failed Click OK

JAVA INSTALLATION (Contd.)Setting Environment Variables:

Right Click on My Computer Click Properties Go to Advanced TAB Click Environment Variables button in the User Variables section Click New

Variable Name: JAVA_HOMEVariable Value: C:\Program Files\j2sdk_nb\j2sdk1.4.2

(where C:\ is the OS Drive)

Click OK OK OK OK



Back door method how to find the -Variable Value: C:\Program Files\j2sdk_nb\j2sdk1.4.2

Right click on Start Explore Program Files find the JAVA folder j2sdk Find the JAVA folder j2sdk1.4.2



KERNEL INSTALATINON:

Installing NT PATCH

From E:\DUMP Folder KER Folder NT Folder I386 Folder NTPATCH Double click on R3DLLINS.EXE OK



From E:\DUMP Folder KER Folder SAPINST Folder NT Double click on SETUP.CMD I Agree Standard Next Reboot now OK YES System Reboots here



Installing Central Instance

After System Restarting, system will starts Central Instance installation automatically

Select SAP R/3 Enterprise 4.7 for Oracle Next

I Agree Install Server Components (Do not change default settings) Next Enter SAP System ID: ERP (Any 3 character) Central Instance Next x 3 Local Installation Next Next

Password: 123Confirm: 123

Next Password: 123Confirm: 123



Select install Server Components Click Next





Note: Must Select Local Installation



Give Password: 123 or sap(Any password, but try to use short numeric password)

Give same Password, as entered earlier: 123 or sap



Just Click Next

Now installation will be started, it will take 4-5 minutes.

Installation finished successfully Click OK

Reboot System here



KERNEL INSTALATINON (Contd.)

Database InstanceStart Programs SAPinst ORACLE KERNEL Prepare New Installation



Start Programs SAPinst ORACLE KERNEL SAPinst Server with GUI

Follow the Screen Shorts below –

I Agree Install Server Components (Do not change default settings) Next Enter SAP System ID: ERP (Any 3 character) Central Instance Next x 3 Local Installation Next Next











Driver for Database Server Directories Select the SAP R/3 installation drive (in this case D:\)Select the SAP R/3 installation drive (in this case D:\)





Give same Password, as entered earlier: 123 or sap





Browse and give location of folder EXPORT1, from folder db1 (in this case the path will be D:\DUMP\DB1\EXPORT1)







Browse and give location of folder EXPORT2, from folder db2 Browse and give location of folder EXPORT3 to EXPORT7, from folder db3 (in this case the path will be D:\DUMP\DB2\EXPORT2 and D:\DUMP\DB3\EXPORT3, D:\DUMP\DB3\EXPORT4,D:\DUMP\DB3\EXPORT5, D:\DUMP\DB3\EXPORT6,D:\DUMP\DB3\EXPORT7

Click OK (Don’t Change any passwords) Click Start



Don’t Change any passwords



Select - No MNLS Support required (if only language required is ENGLISH) MNLS Support required (if other languages like German, French, etc.

are also required with English)

Now installation will be startedIt will take 10 -15 Hours to complete

At the end (after 10 -15 Hours) select continue installation and click Next

If you get any error message, don’t click retry immediately. Wait for 10 minutes and then click retry

After getting message – “Installation finished successfully” Click OK

Shut down Server (if Server is ON)Reboot System



TEST IF SAP R/3 SERVER STARTS / IS WORKING PROPERLY

After system reboots – Double click on the “SAP R/3 System Management

Console” icon to start server

Open SAP R/3 System Management Console from desktop

Click on ‘+’ Symbol which is beside of ‘SAP R/3 System’.

Click all ‘+’ symbols to expand all nodes.

Right Click On DRS (ERP) StartClick on Process ListIn the right side of window you will see strdbs.exe is startingWait until Msgserver and Dispatcher comes to Green Color. Click on Refresh button for every 20 seconds

After getting Green status Click on WP Table (Left Side of the screen)It will show a list of Services



Please wait until ‘Status’ of all services comes to “Wait” (Presently ‘Status’ may be “Run”) AND ‘Start’ column shows “yes”Click on Refresh button for every 20 seconds to refresh the screen.

After SAP R/3 Server STARTS successfully, wait for 2-3 minutes, then turn OFF the SAP R/3 Server and go for the GUI Installation


In Status column all “Wait”And

In Start column all “yes”Indicates SERVER has started

successfully

ERP, 01/03/-1,

In This way u have to start SAP Service


GUI INSTALLATION

Note: Make sure the SAP R/3 Server is turned OFF before GUI Installation From E:\DUMP Folder SAPGUI620 Folder GUI Folder WINDOWS Folder WIN32 Double click on SETUP.EXE Next

OR

From E:\DUMP Folder SAP_GUI_620 Folder SAPGUI_620 Folder GUI Folder WINDOWS Folder WIN32 Double click on SETUP.EXE Next

Important: Make sure drive selected is the OS Drive (in this case C:\) Next

Click “Select All” Next Install Finished

It might take 10 – 15 minutes, it may ask to restart computer, if asked then restart system and start SAP services, and continue from here.



USER CREATION

After GUI Installation - Double click on the “SAP R/3 System Management

Console” icon to START Server

Note: Make sure the SAP R/3 Server is turned ON now

Note: The status under WP Table - In Status column all “Wait” and in Start column all “yes”. Indicates SERVER has started successfully



After GUI Installation a new Icon for “SAP Logon” will be there on the Desktop

Double click on SAP Logon icon

Click ”New” button and give following settings -



Description SAP R/3 (Any name)Application Server STARR3 (Enter the Computer Name)(Note: STARR3 is the Computer Name given while OS installation process) SAP System R/3System number 00Click OK

Note: Make sure the SAP R/3 Server is turned ON

Now click Logon button

Create 1 st Client 000 Client 000Username DDICPassword 19920706

Click Enter button Click Enter button SAP Easy Access screen is launched

Enter T-Code: SU01



Enter Username SAPUSER or sapuser (Not CASE sensitive)Click F8 or Create icon

Under Address TAB Select Title Mr. / Ms.Enter Last Name SAP (Any Name, try not to use your name)Enter First Name SAP (Any Name, try not to use your name)

Select Logon Data TAB Initial Password 123Repeat Password 123

Select Profiles TAB Under Profile column enter

SAP_NEWSAP_ALL

Select and highlight the rows for SAP_NEW and SAP_ALLClick SAVE icon (Ctrl+S)

Select Back icon (F3)Select System Log Off


To make sure the 1 st Client 000 is working Client 000Username SAPUSER or sapuser (Not CASE sensitive)Password 123

Click Enter button

Will prompt to enter –



New Password india (Enter Password of your choice now)Repeat Password India

Click Enter button Click Enter button

If SAP Easy Access screen is launched, 1st Client 000 is working successfully

Select System Log Off


Create 2 nd Client 800 Client 800Username DDICPassword 19920706

Click Enter button Click Enter button SAP Easy Access screen is launched

Enter T-Code: SU01Enter Username SAPUSER or AnyName (Not CASE sensitive,

this will be the Username for Client 800)Click F8 or Create icon

Under Address TAB Select Title Mr. / Ms.Enter Last Name SAP (Any Name, try not to use your name)Enter First Name SAP (Any Name, try not to use your name)

Select Logon Data TAB Initial Password 123



Repeat Password 123

Select Profiles TAB Under Profile column enter

SAP_NEWSAP_ALL

Select and highlight the rows for SAP_NEW and SAP_ALLClick SAVE icon (Ctrl+S)

Select Back icon (F3)Select System Log Off


To make sure the 2 nd Client 800 is working Client 800Username SAPUSER or AnyName (Enter same Username as

created for Client 800)Password 123

Click Enter button

Will prompt to enter –New Password india (Enter Password of your choice now)Repeat Password India

Click Enter button Click Enter button

If SAP Easy Access screen is launched, 2nd Client 800 is working successfully

Enter T-Code: SE38



Program zxzx (Any garbage characters)Click Create button

Access Key 36687663221261278694Click Enter button

Title zxzx (Any garbage characters)Type Select any type from drop down menuClick Save button

CHANGE SYSTEM YEAR TO CURRENT YEAR:After SAP R/3 installation is complete bring back the system year to current year. i.e. change it back from 2010 to 2006

SAP R/3 INSTALLATION IS COMPLETEAND IS READY TO USE


Documents

SAP 47EE Inst Guide