SAP for Mobile - How to Setup the SAP Fiori

7/25/2019 SAP for Mobile - How to Setup the SAP Fiori

1/18

Generated by Jive on 2016-02-11+01:00

1

SAP for Mobile: How To Setup the SAP FioriLaunchpad

Posted by Gavin QuinnMay 4, 2014The Fiori Launchpad is great. If you're not using it yet, you should be.

SAP Fiori Launchpad
http://4.bp.blogspot.com/-JzIoHMjoEag/U2ZGFDmFJeI/AAAAAAAAAY4/g4AI71_y4jA/s1600/Screen+Shot+2014-05-03+at+3.13.03+PM.pnghttp://scn.sap.com/people/gavin.quinn


2/18

SAP for Mobile: How To Setup the SAP Fiori Launchpad


2

There is very little doubt that within three years, Fiori, and the Fiori Launchpad will be the primary way people

use SAP. This is great news. Not only is Fiori an incredibly more simple, intuitive, and beautiful interface,

it's also responsive (it will work on iPads and iPhones as well as a desktop browser). It's the primary user

experience that everything will be based onat SAP in the future.

Since Fiori and the Fiori Launchpad are both a little new, there isn't very much guidance on how to set this up.But good news, I'm about to show you how.

The Waves of Fiori

A quick review of the versions may be useful. The first version of Fiori with the 25 apps is now referred to as

SAP Fiori 1.0 (Based on SAP Fiori Launch Page). Those are delivered as all individual apps, and use the

Launch Page, not the Launchpad. SAP Fiori 1.0 is also the only version generally available, however the

ramp-up program is easy to get into for the next and probably most useful version. Next up are the 66 apps in

SAP Fiori Principal and Transactional Apps for ERP, SRM, and CRM 1.0 (prior to Business Suite Innovations

2013) (link gives the overview in PDF). Finally there will come the few hundred Apps with Business Suite

Innovations 2013. These however, will require the latest ECC 6 EHP 7, which I think may take a while before

everyone gets on board. We will focus our attention to the 2nd option, Prior to Business Suite Innovations

2013.

What's Required

First off, just let me say: There are a lot of things to install. This will take some significant Basis time,probably a solid week. I'm going to use the following document as the main guide: SAP Fiori Principal Apps for

ERP 1.0 (prior to Business Suite Innovations 2013). What a mouthful?

Let's just assume a simple use case, Track Purchase Orderand work from there. There are severalcomponents you will need to install, referenced here. It will look like this once you launch the App:
http://help.sap.com/saphelp_fiorierpx1_100/helpdata/en/67/fa7252752e9f11e10000000a441470/content.htm?frameset=/en/4c/ca4152fc94b610e10000000a44176d/frameset.htmhttp://help.sap.com/saphelp_fiorierpx1_100/helpdata/en/2c/2c7252752e9f11e10000000a441470/content.htm?frameset=/en/a0/773c52b74f1b13e10000000a44176d/frameset.htmhttp://help.sap.com/saphelp_fiorierpx1_100/helpdata/en/2c/2c7252752e9f11e10000000a441470/content.htm?frameset=/en/a0/773c52b74f1b13e10000000a44176d/frameset.htmhttp://help.sap.com/fiori_bs2013/helpdata/en/99/e464520e2a725fe10000000a441470/content.htm?frameset=/en/29/9a5652d8c3725fe10000000a441470/frameset.htmhttp://help.sap.com/fiori_bs2013/helpdata/en/99/e464520e2a725fe10000000a441470/content.htm?frameset=/en/29/9a5652d8c3725fe10000000a441470/frameset.htmhttps://websmp103.sap-ag.de/~sapdownload/011000358700000152042014Ehttps://websmp103.sap-ag.de/~sapdownload/011000358700000152042014Ehttp://help.sap.com/fiori_bs7#section6https://experience.sap.com/fiori


3/18



3

SAP Fiori - Track Purchase Order

Systems

SAP Netweaver Gateway 7.4 SPS04for HUB deployment (this is the most likely deployment option).This will come with most components like the UI Add-Ons out of the box. But you will need to add:

Fiori ERP Applications X1 1.0:

Central App UI NW740- UIX01EAP

HCM UI NW740 - UIX01HCM (optional)

Travel UI NW740- UIX01TRV (optional)

Approve Requests UI NW740- UIX01CA1 (optional)

SAP ERP 6, with any enhancement package but with the latest support package.

Fiori ERP Applications X1 1.0, which is referred to as Central App INT. If you have ECC 6 ehp7,

then you can use Central App INT 740. Personally, I would install everything here:

GBAPP002 600

Gateway BEP- Backend components of Gateway required to expose services.

SRA001 - SRA021 - The actual services you can explore with SEGWon ECC.
http://help.sap.com/saphelp_fiorierpx1_100/helpdata/en/be/8e7a528741a011e10000000a441470/content.htm?frameset=/en/d0/fa7252752e9f11e10000000a441470/frameset.htmhttp://4.bp.blogspot.com/-S7Dp4GLg2T8/U2ZKiz9ScPI/AAAAAAAAAZE/6i3rUDWUB6Y/s1600/Screen+Shot+2014-05-04+at+9.10.54+AM.png


4/18



4

Installation / Configuration Tips

Apply for the Fiori Ramp-Up. Otherwise you will be installing the out of date Fiori 1.0 (not shown inthis guide).

Follow the guide here.

Apply all of the SAP Notes as suggested! There are several errors that this resolves. There are a lotof notes, so this will take time.

Upgrade all of the components described above in systems to the latest support package.

Most software components are difficult to navigate to in the software catalog. You should do a search

for "SAP Fiori ERP" which will locate the missing components.

Once everything is installed, follow the configuration guide here. This includes your Gateway SPRO

configuration and connectivity and SSO between Gateway and ERP.

Configuring the Launchpad

The Launchpad has a few new components or concepts. I'll refer to this next screen shot as we cover some of

these:
http://help.sap.com/saphelp_fiorierpx1_100/helpdata/en/4a/0d78529727826ae10000000a423f68/content.htm?frameset=/en/ea/434c52d285c971e10000000a44176d/frameset.htmhttp://help.sap.com/saphelp_fiorierpx1_100/helpdata/en/67/fa7252752e9f11e10000000a441470/content.htm?frameset=/en/be/8e7a528741a011e10000000a441470/frameset.htm


5/18



5

SAP Fiori Launchpad with Catalog Open

You can use this URL to navigate to your Launchpad: https:///sap/bc/ui5_ui5/ui2/

ushell/shells/abap/FioriLaunchpad.htmlIf you don't assign any Groupsto your user, the screen will be blank. If

you assignCatalogsto users, they can click the Open Catalog button on the top-left corner, search the catalog,

and add Tilesto their home page by dragging the tiles to a target on the left.
http://4.bp.blogspot.com/-HHIkSf6xGLc/U2ZMiaCsVRI/AAAAAAAAAZQ/duGaGS3XUQM/s1600/Screen+Shot+2014-05-04+at+9.19.19+AM.png


6/18



6

SAP Fiori Launchpad Catalog Search

Description of Components in Fiori Launchpad

Tile- The actual box you see above that when clicked will launch an App.

Catalog - All tiles must first be added to a Catalog. These are then searchable and can be added to

Groups. Personally, I think this is a little redundant with Group.

Group- Looking at the end-user screen shot, the groups are what separate the apps: Experience

Basis, and Buyer (MM). These can also be assigned to roles and a user will automatically see themwhen they login.

Once all of your components are properly assigned, you can add a standard role to a user which includes both

a group and a catalog. For example, Track Purchase Order Roles: SAP_MM_BCR_Buyer_X1.If you navigate

to transaction PFCG, you can see how in the Menu section, there is an assigned Group and Catalog:
http://help.sap.com/saphelp_fiorierpx1_100/helpdata/en/01/b13a522fecb610e10000000a44176d/content.htm?frameset=/en/f9/433a5224ecb810e10000000a44176d/frameset.htmhttp://3.bp.blogspot.com/-gFS2prwkn0E/U2ZNrrTXMUI/AAAAAAAAAZY/_DBZCBSJSwE/s1600/Screen+Shot+2014-05-04+at+9.24.32+AM.png


7/18



7

SAP Fiori - Role for Track Purchase Order (MM Buyer)

Administering the Launchpad

You will probably want to change your groups and add some of your own tiles. For this, you need to go

to the Fiori Launchpad Administrator. ** As of this writing, this does not work in

Chrome, only in Firefox**Navigate to this URL: https:///sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html?sap-client=100&sap-language=ENYou will see something like this (notice all the

Catalogs on the left):
http://2.bp.blogspot.com/-WMHshiFgyaw/U2ZOqZgKrXI/AAAAAAAAAZg/TdShcTdWg7M/s1600/Screen+Shot+2014-05-04+at+9.28.34+AM.png


8/18



8

SAP Fiori Launchpad Administration

If you want to create a new tile, you first need to add it to an existing Catalog or create a new Catalog and

then add it. You can see the + icon at the bottom of the Catalogs on the left, or a new tile can be created by

clicking the + button on the bottom-right tile in the main area. Next, you would click the Groups option in thetop-left cornerand then you could add a new tile to one of your groups that are assigned to a role in the PFCG

transaction:
http://4.bp.blogspot.com/-foHTzd0oeXU/U2ZQmArMu9I/AAAAAAAAAZs/UxiMtZ92CCE/s1600/Screen+Shot+2014-05-04+at+9.37.01+AM.pnghttp://4.bp.blogspot.com/-foHTzd0oeXU/U2ZQmArMu9I/AAAAAAAAAZs/UxiMtZ92CCE/s1600/Screen+Shot+2014-05-04+at+9.37.01+AM.pnghttp://4.bp.blogspot.com/-foHTzd0oeXU/U2ZQmArMu9I/AAAAAAAAAZs/UxiMtZ92CCE/s1600/Screen+Shot+2014-05-04+at+9.37.01+AM.png


9/18



9

SAP Fiori Launchpad - Managing Tiles in Groups

A Few Other NotesAfter following the above steps, you should have the Fiori Launchpad running and be able to add and maintain

the tiles for your users. I hope you get to enjoy it. It's a great experience for your end users, and an extremely

versatile component itself.Here are a few other things you could do:

Add dynamic tiles - Tiles that refresh every 15 seconds with a key figure such as pending approvals,sales orders, or system information.

Add non-Fiori tiles - You can launch Web Dynpro, or any other URL to make a single navigation point

for all of your backend applications, similar to what your Portal does today.

Add RSS feeds - You could add your company news for easy viewing on mobile devices or for

updates like system outages or SAP notifications, such as "System will be down tomorrow so thatwe can install more Fiori Apps!"

Follow Ups

Feel free to follow up with me on SCN for any questions, demonstrations, implementation

assistance, or customization requests. You can read more about Mindset, an SAP Partner, at http://

www.mindsetconsulting.comwhere we specialize in implementation and customization of alternative SAP User

Interfaces. You can also connect with me on LinkedIn.
http://www.linkedin.com/pub/gavin-quinn/11/b9a/15ahttp://www.mindsetconsulting.com/http://www.mindsetconsulting.com/http://3.bp.blogspot.com/-oliuxxAM28I/U2ZR7pccydI/AAAAAAAAAZ4/v-wNZjWxr-0/s1600/Screen+Shot+2014-05-04+at+9.42.06+AM.png


10/18



10

57816 Views Tags: mobile, launchpad, sapui5, fiori

Pavan Golesar

Sep 2, 2015 3:14 PM

Hello Gavin ,

Its Exactly what I was looking from morning All in one place.

Good content. Very informative

Thanks,

Best Regards,

Pavan Golesar.

Christian Schweig

Aug 11, 20154:31 PM

The Fiori Launchpad Administrator does not apply changes. I can delete or create tiles, but these changes

are not persisted. Every time I refresh the page, or click to another catalogue, the configuration is reset to its

prior state. Is this a known bug? Is there any fix available? We use SAPUI5 Version 1.28.1. Thanks and best

regards.

Shyam Sunder

Aug 11, 2015 7:40 AM

Very useful blog

Wade Krzmarzickin response to Ajaroddin Havaldaron page 10

Jul 7, 2015 8:01 PMSearch models are basically queries that can be indexed for performance. The link Gavin provided has a

spreadsheet attached that contains a fairly detailed list of "out of the box" search models defined for Fact

Sheets related to specific uses. If an "out of the box" search model doesn't meet your needs you can always

create your own. Creating or Enhancing Search Models - Embedded Search - SAP Libraryis a great place to

start.

Ajaroddin Havaldarin response to Gavin Quinnon page 10

Jul 3, 2015 7:34 AM

Hi Gavin,

But can it search in a particular table?And how to decide which search model to use?

Regards,

Ajaroddin

Gavin Quinnin response to Ajaroddin Havaldaron page 11

Jul 2, 2015 5:11 PM
http://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/wade.krzmarzickhttp://scn.sap.com/people/shyam.sunder11http://scn.sap.com/people/christianschweighttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttps://help.sap.com/saphelp_nw73/helpdata/en/b6/e51604ca9a480bb8d58111a837b4ae/content.htmhttp://scn.sap.com/people/wade.krzmarzickhttp://scn.sap.com/people/wade.krzmarzickhttp://scn.sap.com/people/shyam.sunder11http://scn.sap.com/people/shyam.sunder11http://scn.sap.com/people/christianschweighttp://scn.sap.com/people/christianschweighttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/pavangolesarhttp://scn.sap.com/people/pavangolesarhttp://scn.sap.com/community/mobile/blog/tags#/?tags=fiorihttp://scn.sap.com/community/mobile/blog/tags#/?tags=sapui5http://scn.sap.com/community/mobile/blog/tags#/?tags=launchpadhttp://scn.sap.com/community/mobile/blog/tags#/?tags=mobile


11/18



11

Hi Ajaroddin,

The search is fairly wide-open, but can't search the entire database. Fact sheets are linked back to search

models in HANA. You can see the list here: https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/

sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361

You need some context of the search, so that you can have a result that is sensible and actionable.

Ajaroddin Havaldar

Jun 30, 2015 7:14 AM

Hi Gavin,

Actually I've an requirement where there will be a search bar and user can search for record. User can enter

anything and the search needs to be done in whole DB not only in one particular column it has to search in all

the columns and return the number of records found for that search.

So if I use HANA fact sheets and search model can this be accomplished?

Regards,

Ajaroddin


Jun 30, 2015 2:06 AM

Hi Ajaroddin,

The fact sheets are fairly rigid from what I've seen so far. Requiring HANA, and with specific search models

that are used. We're working on some possible extensions here, but it's very early in lab stages.

Feel free to elaborate though on what you are looking to accomplish.

Regards,

Gavin

Ajaroddin Havaldar

Jun 29, 2015 10:24 AM

Hi Gavin,

Thanks.

If I want to implement same search in my application instead of the app here I'll search the whole DB table for

some record, I can search anything but in result I want the corresponding record, can fact sheets work here as

well?

Regards,

Ajaroddin


Jun 26, 2015 3:48 PM

Hi Ajaroddin,
http://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldarhttps://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3139393934363326https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3139393934363326


12/18



12

There are two ways it works:

1. With HANA, it will search all available fact sheets.

2. Without HANA, it will search the apps that you have

Ajaroddin Havaldar

Jun 26, 2015 11:38 AM

Internally how does the global search work in launchpad?

Steve Conicelliin response to Derek Barretton page 12

Apr 11, 2015 1:03 AM

I'm glad this helped you out!

Derek Barrettin response to Steve Conicellion page 13

Apr 11, 2015 12:02 AM

Yes, thank you so much ! I was struggling with this for days ! I kept seeing all the Fiori stuff online but none of it

would install into 7.4.

So with your post I was able to see a lot of the add-ons through MOPZ and get them.

I'd give you 5 Likes if I could lol.

Gavin Quinnin response to Thomas Bezakon page 13

Feb 19, 2015 5:01 PM

Hi Thomas-
http://scn.sap.com/people/gavinpquinnhttp://scn.sap.com/people/gavinpquinnhttp://scn.sap.com/people/derek.barretthttp://scn.sap.com/people/derek.barretthttp://scn.sap.com/people/steve.conicellihttp://scn.sap.com/people/steve.conicellihttp://scn.sap.com/people/ajaroddin.havaldarhttp://scn.sap.com/people/ajaroddin.havaldar


13/18



13

That first screen is actually part of an app Mindset will be releasing soon that monitors your Basis processes.

Keep an eye on our blogs for more information.

Thanks,

Gavin

Thomas Bezak

Feb 18, 2015 8:02 PM

How do you get tiles like in your first screen shot showing logged in users and the number of short dumps?

Javier Rubio

Jan 15, 2015 2:43 PM

Hi Gavin and thanks a lot for this post.

May I ask you a question?: When embedding a non-fiori custom app ( adding non-fiori tails ) in the launchpad

I provide it with an URL. This URL was created using BSP. When clicking on the tail a new window is opened

but how can I open the URL in the current launchpad window in the same way as the standard tails do?

Thank you,

Javier

Manu Kumar

Sep 10, 2014 6:27 AM

Thanks for sharing

This will enhance to our knowledge.

Warm Regards,

Manu

SAP Seeker

Sep 5, 2014 5:46 PM

Thanks Gavin for the blog.

Please let me know, how to add a custom UI5 application or custom Webdynpro Application to Fiori

Launchpad ? Can you please add some screenshots here, explaining how to add custom URL's (UI5 or WDA)

to launchpad ?

Best Regards,

Seeker.

Steve Conicelliin response to Steve Conicellion page 14

Aug 20, 2014 4:14 PM

Hi All,
http://scn.sap.com/people/steve.conicellihttp://scn.sap.com/people/steve.conicellihttp://scn.sap.com/people/steve.conicellihttp://scn.sap.com/people/sap.seeker2http://scn.sap.com/people/sap.seeker2http://scn.sap.com/people/s0010055563http://scn.sap.com/people/s0010055563http://scn.sap.com/people/javier.rubiohttp://scn.sap.com/people/javier.rubiohttp://scn.sap.com/people/thomas.bezak2http://scn.sap.com/people/thomas.bezak2


14/18



14

I was able to figure this out. You cannot download the Central App INT 740 from service marketplace... this

needs to be done via Maintenance Optimizer. Central App INT 740 is just a collection of all of the SRA001 -

SRA021 add-ons (plus a few others). Each add-on is installed individual (you will not see one add-on called

"Central App INT 740").

Hope this helps someone out.

Cheers,

Steve

Steve Conicelliin response to Gavin Quinnon page 16

Aug 19, 20142:22 AM

Hi Gavin,

I also have a backend ECC 6 EHP7 system with a NW 7.31 NW Gateway Frontend (central hub). What I

cannot find any information on is as to what exactly the Central App INT 740 add-on is. What is this add-on

actually called? I do not want to install any of the UI addons that are already on the Gateway on my backend

ECC system.

As of EHP7 (based on NW7.4), IW_BEP goes away and is replaced by SAP_GWFND (Gateway Foundation).

I already have loaded Addons GBAPP002, GBHCM002, and GBH003. When trying to load any of the SRA*

add-ons, the prerequisite of IW_BEP is not met and I am unable to load it as a result.

Unfortunately, I cannot find any documentation as to what the "Central App INT 740" add-on actually is...

Any help would be greatly appreciated!

Thanks,

Steve

RAHUL JAIN

Aug 14, 2014 1:30 PM

Thanks Gavin very much useful...

one question:

I have created a fiori app for mobile and its all working fine. Now i have added a image file to my empty view.

When i run the application using eclipse its working fine and i am able to see the image also. But when i am

deploying it to launch pad the image file is not getting displayed and am getting this error as follows

"NetworkError: 404 NOT FOUND - http://ws-sapsvr01:8010/sap/bc/ui5_ui5/ui2/ushell/shells/MIMEs/img/

SapTeam.png"

Can you please help me sort this out?

it would be very helpful.

Jwala ESS MSS

Aug 9, 2014 9:21 AM
http://ws-sapsvr01:8010/sap/bc/ui5_ui5/ui2/ushell/shells/MIMEs/img/SapTeam.pnghttp://scn.sap.com/people/sapmegapower.starhttp://scn.sap.com/people/sapmegapower.starhttp://ws-sapsvr01:8010/sap/bc/ui5_ui5/ui2/ushell/shells/MIMEs/img/SapTeam.pnghttp://ws-sapsvr01:8010/sap/bc/ui5_ui5/ui2/ushell/shells/MIMEs/img/SapTeam.pnghttp://scn.sap.com/people/rahul.jain09http://scn.sap.com/people/rahul.jain09http://scn.sap.com/people/steve.conicellihttp://scn.sap.com/people/steve.conicelli


15/18



15

Thank you for providing a nice information .

Gavin Quinnin response to Srikanth Subramanianon page 15

Aug 6, 2014 11:00 PM

Hey Srikanth,

The requirement would be that the news feed is CORS compliant: http://help.sap.com/saphelp_uiaddon10/

helpdata/en/97/192358c6de4494b225e3c2f3f4825c/content.htm

Most are probably not -- so that may be the trick?

Srikanth Subramanianin response to Gavin Quinnon page 15

Aug 6, 2014 9:22 PM

Hi Gavin,

Have you tried the news tile which can be shown in Launchpad. Have you mentioned this as a bug in your

earlier reply.

If it works, can you please let me know how to set it up.

Regards,

S.Srikanth

Gavin Quinnin response to Srikanth Subramanianon page 15

Aug 6, 2014 6:57 PM

Hi Srikanth,

That may be a bug -- I did notice that as well a while back, but haven't seen an update. We usually leave the

default refresh at 0, which I believe will do an update right away, then every 15 seconds thereafter.

Srikanth Subramanian

Aug 6, 2014 5:55 AM

Hi Gavin,

Thanks for the blog and it was great !!!.

We are in NW Gateway 7.4 with latest UI add-ons and also in ECC backend add-ons. When I logged into

admin and set the auto refresh button to 5 sec for each app.

But, when I logged in as an employee and when I see the tile is not getting auto refreshed automatically after

5 sec. settings. I need to keep refreshing the page to see latest either in timesheet or leave request or in

approval app. Can you please let me know how to do it.

And also, I set the news tile link to show it up in Launchpad. But, its not showingany information.
http://help.sap.com/saphelp_uiaddon10/helpdata/en/97/192358c6de4494b225e3c2f3f4825c/content.htmhttp://scn.sap.com/people/srikanth.subramanianhttp://scn.sap.com/people/srikanth.subramanianhttp://scn.sap.com/people/gavinpquinnhttp://scn.sap.com/people/gavinpquinnhttp://scn.sap.com/people/srikanth.subramanianhttp://scn.sap.com/people/srikanth.subramanianhttp://help.sap.com/saphelp_uiaddon10/helpdata/en/97/192358c6de4494b225e3c2f3f4825c/content.htmhttp://help.sap.com/saphelp_uiaddon10/helpdata/en/97/192358c6de4494b225e3c2f3f4825c/content.htmhttp://scn.sap.com/people/gavinpquinnhttp://scn.sap.com/people/gavinpquinn


16/18



16

Am I missing anything on the above.

Regards,

S.Srikanth

Gavin Quinnin response to Nikunj Thakeron page 16

Aug 3, 2014 7:17 PM

Hi Nikunj,

Thanks for the question. The SRA001-SRA021 are what needs to go onto the backend system. Those items

have the prerequisite of IW_BEP, and once installed, they will be explorable from SEGW.

Nikunj Thaker

Aug 2, 2014 11:45 AM

Hi Gavin,

Good document.

Need some clarity.

Going with central Hub Deployment method.

Having frontend server with SAP NW7.40 and backend server with ERP 6.0 EHP7

As per deployment method mention in link

as link on frontend server need to deploy Central UI Component (which will be UIX01EAP ) + SAP Business

Suites product specific UI component (Central App INT NW740)

Nothing mention to add on backend system.

So below component mention by you need to deploy on frontend server ?

Central App UI NW740 - UIX01EAP

GBAPP002 600

SRA001 - SRA021 - The actual services you can explore with SEGW on ECC.

Regards,

Nikunj Thaker

Hemendra Sabharwal

Aug 1, 2014 6:33 AM

Very Nice Gavin, thanks for sharing.
http://scn.sap.com/people/hemendra.sabharwalhttp://scn.sap.com/people/nikunj.thakerhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/hemendra.sabharwalhttp://scn.sap.com/people/hemendra.sabharwalhttp://help.sap.com/fiori_bs2013/helpdata/en/ba/f61f533f86ef28e10000000a4450e5/content.htm?frameset=/en/40/1b675374bc6655e10000000a423f68/frameset.htm&current_toc=/en/40/1b675374bc6655e10000000a423f68/plain.htm&node_id=3&show_children=falsehttp://scn.sap.com/people/nikunj.thakerhttp://scn.sap.com/people/nikunj.thakerhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/gavin.quinn


17/18



17

Warm Regards

Hemendra

Rene Trippolt

Jun 25, 2014 2:56 PM

nice blog, thanks!

Regards,

Ren

M. Stitselaarin response to Paul J. Moddermanon page 17

Jun 5, 2014 8:54 AM

Hi Paul,

Thanks a lot for the offer.

But Im a technical consultant, Im not mainly interested to look at a Fioir demo itself, but more in the technical

installation and setup of the Fiori and Gateway system.

Since yesterday Fiori has become public available without extra costs, so Im now good to go.

But thanks again for the offer.

Regards,

Marco

Paul J. Moddermanin response to M. Stitselaaron page 17

Jun 5, 2014 6:03 AM

Hi Marco,

I work with Gavin. If you like, follow my profile and send me a direct message and I can help you get access to

a Fiori setup (that is, if you'd still like to look at a demo).

Thanks,

Paul

M. Stitselaar

Jun 2, 2014 4:51 PM

Hi Gavin Quinn,

First of all, a very nice blog .

One question: do you know if there is a demo Fiori app available to test this?I only want to test this and I get an empty Launchpad becuase I do not want to buy the Fiori apps yet but first

want to test and see how it works.

Perhaps there is a demo Fioripatch that I can install or activate that you know of?

Best Regards,

Marco
http://scn.sap.com/people/m.stitselaarhttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/m.stitselaarhttp://scn.sap.com/people/m.stitselaarhttp://scn.sap.com/people/paul.mindsethttp://scn.sap.com/people/paul.mindsethttp://scn.sap.com/people/m.stitselaarhttp://scn.sap.com/people/m.stitselaarhttp://scn.sap.com/people/rene.trippolt3http://scn.sap.com/people/rene.trippolt3


18/18


Generated by Jive on 2016 02 11+01:00

Gavin Quinnin response to Simon Kempon page 18

May 10, 2014 11:51 PM

Thanks Simon for the feedback.

I agree that things may get complicated when you get past say 30-40 tiles. It would be similar in experience I

think to the iPhone apps. Hopefully a single user doesn't have more than say 50 actual roles. I'm sure there will

be creative ways to sort apps later. I know you can rearrange these, and have a "my group" towards the top as

well that may clean things up.

Simon Kemp

May 8, 2014 2:55 AM

Nice post, very clear and easy to follow.

One comment from me.. I like the Fiori Launch Pad... but have some concerns around how it displays content.

The tiles are nice and it works well with a few groups that each have a few tiles in them... what happens when

you have 10 - 15 groups with 10 tiles each?

It is a very flat information architecture, I don't see a way to collapse groups or have any sort of navigation

hierarchy...

Maybe I am missing something - perhaps it is only meant for "light" use but if it is truly to be the future that

"everything will be based on" I think it needs some more options.

I certainly don't want to be negative on it, just want to be real

Thanks again,

Simon

Suvonkar Bashak

May 6, 2014 2:23 PM

Nice Blog, cheers!

Regards,

Suvonkar

Julie Plummer

May 5, 2014 5:26 PMVery useful - thanks Gavin. I've retweeted this ;-).

Aviad Rivlin

May 5, 2014 1:27 PM

Very nice blog! Thanks for sharing!
http://scn.sap.com/people/aviad.rivlinhttp://scn.sap.com/people/skemphttp://scn.sap.com/people/aviad.rivlinhttp://scn.sap.com/people/aviad.rivlinhttp://scn.sap.com/people/julie.plummerhttp://scn.sap.com/people/julie.plummerhttp://scn.sap.com/people/suvonkar.bashakhttp://scn.sap.com/people/suvonkar.bashakhttp://scn.sap.com/people/skemphttp://scn.sap.com/people/skemphttp://scn.sap.com/people/gavin.quinnhttp://scn.sap.com/people/gavin.quinn

Documents

SAP for Mobile - How to Setup the SAP Fiori