SAPI di Dante Teruzzi St. G. Ratti, 84 20855 Lesmo (MI) tel. +39 039 6065116 fax. +39 039 6888887 email. sapi.dt@tin.it web. www.sapicombustione.com / www.sapicombustion.com

INNOVATIVE SOLUTIONS FOR

INDUSTRIAL COMBUSTION

Since 1983, SAPI is specialized in industrial combustion and provides innovative solutions by technical expertise backed up with years of experience in factory plants.For over twenty years SAPI has invested in research, testing and implementation of combustion equipment to be installed on machines for any industrial production cycles.

ABOUT US

The “know-how” acquired in ‘hands on’ facilities experience, led us to create systems combustion technology for all types of fuel (natural gas, LPG, gas poor, diesel, kerosene and fuel oil).SAPI provides a complete service and management for design, sizing and the realization of any combustion plant.

ABOUT US

Total surface: 2.500 sqm

Employees and workers: 40 people

Yearly income 15 Mln Euro

OUR FACTORY

Burners type proposed are applicable in many production systems and in different sectors such as: STEEL MAKING; HEAT TREATMENTS; KILNS; DRY-OUT.

APPLICATION INDUSTRIES

STEEL MAKING

Combustion plant for: Roller furnace for screws and

nuts, steel plate sheet. Intermittent furnace for

thermal treatment and forging.

Aluminium, steel, lead and cast furnace.

Post combustion.

Forging / reheating chamber furnace

Process scope : Forging / heating material

for extrusion and printing Products:

fittings, bearings, etc. for nuclear and petrochemical industries.

Chamber specificatiions: width : 3 mt height : 2.5 mt depth : 5 mt

Production: 10 t/hr

Fuel: Natural gas Working temperature:

1200/1250°C

HEAT TREATMENTS

Combustion plant for: Furnace thermal treatment for

steel and stainless Furnace thermal treatment for

glass and porcelain

Carriage furnace for thermal treatment

Process scope : Thermal treatment for

material distension Products:

fittings for petrochemical industry.

Chamber specifications: width : 4 mt height : 4 mt depth : 10 mt

Fuel: Natural gas Working temperature:

600 to 1200°C The furnace is controlled

by PLC which manages 32 zones

KILNS

The oven is constructed by metallic carpentry, the inside is constructed with refractory material / ceramic fiber, enabling it to reach temperatures which can heat or melt various types of metal and materials.Typically the only metal that is melted is aluminum, while in all other cases (steel, cast iron, aluminum alloys, copper alloys) the oven is used to perform the warm forging, extrusion or heat treatments.

Forging / reheating chamber furnace

Process scope : Forging / heating

material for extrusion and printing

Products: fittings for

petrochemical industry. Chamber specificatiions:

width : 2 mt height : 1,5 mt depth : 3 mt

Production: 5 t/hr Fuel: Natural gas Working temperature:

1200/1250°C

DRY-OUT

Furnace Dry-out is intended like

to remove from refractory material all the residual water.

The hot air generators are ideal for a dry-out because they can ensure that all parts of the refractory are heated in the same way.

Potentiality: 340 Kw 450  Kw 1500 Kw

Dry-out hot air generator Process scope:

Refractory concrete dry-out

Fuel: Lpg

Chambre specificatiions: diameter : 5 mt depth : 2 mt

Working temperature: 0°C to 150°C in 12 hours persistence at 150°C for

24 hours 150°C to 250°C in 12

hours persistence at 250°C for

15 hours 250°C to 0 °C in 5 hours

REFRACTORY BURNERS (medium/high speed, monoblock, radiant tubes) AIR/AIR EXCHANGERS DRY-OUT

PRODUCTS

CERTIFICATIONS

THANK YOU!