SAS System 150 11-02-15

8/7/2019 SAS System 150 11-02-15

1/7

metal ceilings

8/7/2019 SAS System 150 11-02-15

2/7SAS International +44 (0) 118 929 0900 www.sasint.co.uk

system 150modular hinge-down clip-in tiles (concealed grid)

8/7/2019 SAS System 150 11-02-15

3/7SAS International +44 (0) 118 929 0900 www.sasint.co.uk/system150

system1

50inform

ation

System Description

SAS System 150 is a range o highly versatile square andrectangular clip-in metal ceiling tiles which oer hingedown access throughout as standard. Supported romthe SAS Deep Omega Bar tiles can pivot and slide alongthe suspension system providing access to large areaso the ceiling void.

System Features Hingedownaccessthroughout Precisetilelevellingwithtwinpiparrangement Closedbuttjointswithbevellededges Securevoid,easyaccesstoolrequiredtodemounttile Upwardcleaningpressurecanbeappliedtoremove

stubborn marks without disturbing tile

Concealedgridsystem Minimum25-yearproductlifeexpectancy

AccessAccess within overall construction depth. Secure void,easy access tool required to demount tile

Standard Module Sizes (mm)300 x 300 500 x 500 750 x 750300 x 600 500 x 1500300 x 900 600 x 600300 x 1200 600 x 1200300 x 1500 610 x 610

Special sizes are available on request. Please contact or

our technical department urther details.

FinishPolyester Powder coated supplied as standard witha RAL 9010 smooth nish; a ne textured nish(SAS FT), anti-bacterial coating (SAS AB) and othercolours are available. See page 36 or a ull range opaint nish options.

Grid SystemClip-in SAS Deep Omega Bar, see page 149 orcomponents.

ShapeTiles can be square, rectangular, triangular or trapezoidalwith bevelled edges and vertical sides, incorporating ahinging tab and pip locating detail.

PerforationTypically supplied with 1522, 1820 or 2516 peroration.See page 103 or ull details and peroration options.

IntegrationApertures can be ormed during manuacturing orluminaires and other services, see pages 3839 orurther details

WeightApproximately 9kg/m or 600 x 600mm steel tiles,

acoustic pad and SAS Deep Omega Bar suspensionsystem.

8/7/2019 SAS System 150 11-02-15


Attenuation Absorption

dBClass

NRC

Plain tile.

38 N/A

Perorated tile with acoustic feece.

13Class C

0.70 0.65

Perorated tile with 18mm x 80kg/m

acoustic pad. 30Class A

0.85 0.90


acoustic pad and steel backing plate.

(Note: 600x600mm & 750x750mm only)40

Class D

0.65 0.55


acoustic pad and 12.5mm plasterboard.

(Note: 600x600mm & 750x750mm only)42

Class C

0.75 0.65

system150te

chnical

Section Drawing

1] Emac Hanger 2] Emac Channel 3] Emac Wall Anchor 4] Omega Bar to Channel Bracket 5] SAS Omega Bar

6] Omega Bar Splice 7] Perimeter Trim 8] Perimeter Wedge 9] Corner Splice 10] System 150 Tile

*Lightweight installations only, see page 163 or ull details.

Emac suspension components can be ound on page 144, System 150 / SAS Deep Omega Bar component details can be ound on page 149.

Perimeter trims and accessories can be ound on page 115.

105mm

2

10

4

5

Acoustic Performance Data

8/7/2019 SAS System 150 11-02-15


system1

50featur

es

The unique design o SAS System 150 allows every ulltile to pivot and slide along the grid system. The hingeand slide eature acilitates easy access to large areaso the ceiling void or maintenance; tiles are retainedwithin the ceiling grid avoiding damage and eliminatingthe need or storage.

Luminaires and other services can be integrated

with System 150. Modular luminaires can be supportdirectly rom the sot. Where maximum point loadsare exceeded (see installation advice page 163) theload must be supported independently or rom thegrid. The SAS pattress system allows the integration oheavier items into the system by distributing the loaddirectly back to the Omega Bar, eliminating the need orcomplicated support arms. Further details are availablerom the technical department.

The deep Omega Bar has a maximum spanning abilityo 2000mm. The wide spanning bar requires 25% less

primary channels, top xings and brackets, savinginstallation time and materials.

Suspension centres should be reduced when using highperorming dB panels due to the additional weight orwhere loads are applied to the system, see page 163 orinstallation advice.

Bulkhead closure panels enable foating rats andceilings to be created using a standard clip in ceiling tile,see image on pages 24 and 70.

The height o the closure panels can be manuacturedto suit the project requirements. Further details areavailable rom the technical department.

In areas where it is necessary to restrict access to theceiling void, System 150 oers a security clips thatholds the tiles into the supporting grid. This is idealor airports and other security driven environments,including schools and lavatories.

Tiles without security clips can be removed rom theceiling plane by means o an easy access tool.

Hinge and Slide Facility

Product Integration

Wide-Spanning Omega Bar

Bulkhead Closure Panels

Security Considerations

8/7/2019 SAS System 150 11-02-15

6/7SAS International +44 (0) 118 929 0900 www.sasint.co.uk/installation

system150in

stallationadv

iceNotesMaximum suspension centres should only be consideredor lightweight* installations.

Emac hangers should be installed a maximum o 300mmrom the end o a run o Emac channel and 300mm romthe joint between these channels. Where two omegabars meet and are spliced together, an Emac channelshould be installed within 500mm.

It is considered good practice to stagger joints insupporting structures.

Additional LoadsWhen supporting services such as downlights, speakers,detectors and other mechanical and electrical services,the maximum load applied to the ceiling tile must notexceed 2.5kg including spreader yokes i applicable.

The SAS pattress system allows the integration oheavier items by distributing the load back to the EmacOmega Bar. The pattress can accommodate a load oup to 6kg and are available in sizes to suit all standardmodules.

For load greater than 6kg we recommend independentsuspension.

Pattresses are available in sizes to suit all standard

modules.

*Lightweight meaning base system only such as feeceor pad backing. Where the ceiling supports the loado services or or acoustically upgraded ceilings, thesuspension should be installed to minimum dimensionsshown above. Suspension centres should always beconsidered when applying additional loads.

For urther advice please contact the SAS technicaldepartment.

1] Emac Hanger 2] Emac Channel 3] Emac Wall Anchor 4] Omega Bar to Channel Bracket 5] SAS Omega Bar 6]

Omega Bar Splice 7] Perimeter Trim 8] Perimeter Wedge 9] Corner Splice 10] System 150 Tile

Refer to components section page 149 for full description and item numbers.

Bracket fxed to CL o setting out Vs or accurate

setting-out o ceiling to 100mm increments.

8/7/2019 SAS System 150 11-02-15

7/7

SAS International, 31 Suttons Business Park, London Road, Reading, Berkshire RG6 1AZ, United Kingdom

Tel: +44 (0)118 929 0900 Fax: +44 (0)118 929 0901 www.sasint.co.uk

SAS International, Unit 228 Block C, Blanchardstown Corporate Park, Dublin 15, Ireland

Tel: +353 (0) 1899 1134 Fax: +353 (0) 1899 1753All Information and details in this brochure are correct at time of going to press. Published by SAS International. All rights reserved. Copyright 2008

Printed using vegetable based inks on FSC certified paper. The printer holds the environmental standard IS0 14001

Documents

SAS System 150 11-02-15