Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
SATURATED PURESTEAM STERILIZERS
Inox torres design and manufacture Saturated Pure S team Ster i l i zers for the ster i l i zat ion of solid, porous or liquid loads, for medical and pharmaceut ical companies.
The saturated pure steam sterilizer equipment PSS are rectangular type, with rectangular doors in order to be adapted to the trolleys. The doors can be automatically opened or closed directly from the control system, where all the chamber actions are handled (Alarms, Recipes, Graphics, Users, Synoptics, etc).
In the technical area, a very efficient liquid ring pump is installed to do the vacuum inside the chamber, in order to pull the air to replace it by saturated steam, and takes also advantage to eliminate the accumulated condensates in real time leading to an excellent temperature uniformity. In that technical zone are installed all the components required for the equipment operations.
The equipment are manufactured in high quality stainless steel, using welding methods like TIG or orbital type. Regarding qualification aspects, the chambers are tested and validated according stringent protocols.
Our standard designs go from a 288l and up to 8.960l, but the dimensions and design can be adjusted according final user needs.
Description: Several advantages for our saturated steam sterilizers:
Flexible design, according final user requirements.
High efficiency, optimizing energy consumption and
cycle time.
Use of well known brands for all the components.
A perfect temperature uniformity.
High quality equipment based on optimized GMP design,
fulfilling the most stringent European standards (EN285,
PED 97/23/CE, CE marking, etc).
·
·
·
·
·
www.inoxtorres.com | T: +34 93 863 43 82 | E: [email protected]
Design / Manufacturing / Installation / CS
OPTIONS:
RANGE OF PRODUCTS “PSS Models” * :
Clean Steam Generator
Mechanical polishing Ra<0,5
Pit mounting
Automatic loading and unloading system
Lateral panels
Software validation
Indirect or Direct Cooling
Limit switches on pneumatic valves
Trays, Carts and transfer trolleys
SCADA Control System
Steam & Air Sterilization
Superheated water sterilization
Drying by heated air pulses
·············
For INOXTORRES, safety should be a priority for personal as well as for the Sterilization equipment.
For that, the equipment have many technical features an specifications leading to a safe use:
· Full instrumentation (safety valves, transducers, pressure switches, etc…).
· Automatic door locking system.
· Emergency stop close to the door.
· Photocells on each doors for an optimum protection during opening and closing operations.
· Control system giving visual and audible alarms.
SAFETY:
MODELS
PSS 668
PSS 6610
PSS 8810
PSS 8812
PSS 101010
PSS 101012
PSS 101014
PSS 101212
PSS 101214
PSS 121212
PSS 121216
PSS 121616
PSS 121620
PSS 161616
PSS 161620
PSS 161624
PSS 161628
PSS 162024
PSS 162028
600
600
800
800
1.000
1.000
1.000
1.000
1.000
1.200
1.200
1.200
1.200
1.600
1.600
1.600
1.600
1.600
1.600
600
600
800
800
1.000
1.000
1.000
1.200
1.200
1.200
1.200
1.600
1.600
1.600
1.600
1.600
1.600
2.000
2.000
800
1.000
1.000
1.200
1.000
1.200
1.400
1.200
1.400
1.200
1.600
1.600
2.000
1.600
2.000
2.400
2.800
2.400
2.800
288
360
640
768
1.000
1.200
1.400
1.440
1.680
1.728
2.304
3.072
3.840
4.096
5.120
6.144
7.168
7.680
8.960
WIDTH (mm) HEIGHT (mm) DEPTH (mm) CHAMBER VOLUME (l)
* Dimensions could be adjusted according customer requirements.
www.inoxtorres.com | T: +34 93 863 43 82 | E: [email protected]
ETHYLENE OXIDESTERILIZERS
( E T O )
Inoxtorres design and manufacture Ethylene Oxide Sterilizers (EO/ETO) for the sterilization of thermo sensitive products (sensitive to heat and humidity) like syringes, catheters, dialysis cartridges, plastic dressings, sutures, etc.
Our design is modular type and gives the main advantage to divide the risk area in order to reduce the probability to have a potential explosive atmosphere. Those projects are customizable as we offer a very flexible design, according to the client requirements. Our chambers are prepared to work either with All in One cycle, or with preconditioning and degasing cells. We also propose all the ancillary equipment for turnkey projects.
Our standard designs go from 4 Euro pallets (10m³) up to 32 Euro pallets model (80,6m³), but the dimensions and design can be adjusted according to the final user needs.
Description: Several advantages for our ETO sterilizers:
Flexible design, based on several modules.
High efficiency, optimizing energy consumption and cycle time.
Excellent EO concentration and temperature uniformity(+/1ºC).
Use of 100% EO (+N2) as well as 90/10 mixture, to limitthe chamber internal pressure (<+0,5b).
High safety level, delivering ATEX certificate (zone 1 / zone 2).
Use of well known brands for all the components.
Those ETO sterilization equipment use GMP designs and comply with the most stringent European standards.
···
·
··
www.inoxtorres.com | T: +34 93 863 43 82 | E: [email protected]
Design / Manufacturing / Installation / CS
www.inoxtorres.com | T: +34 93 863 43 82 | E: [email protected]
100% ETO
100% AIR 100% CO2
For INOXTORRES, safety should be a priority for personal as well
as for the sterilization equipment. For that, the PLC is composed of
special safety modules, and is programmed together with the
SCADA according the HAZOP of each project. In addition, several
safeties are taken into account during the design, like for instance:
3 redundant safeties as minimum for any critical function (PL/SIL),
automatic calculation of the inflammable diagram, use of flame
arrestors, etc.
SAFETY:
OPTIONS:
RANGE OF PRODUCTS “EOS Models” * :
MODULAR DESIGN:
Vertical doors
Parametrical release
Modulating pneumatic valves
Cooling system for jacket
Pure steam generator
Automatic loading and unloading system
Monitoring system (LEL / PPM)
Preconditioning cells
Degasing cells
Catalytic system / Scrubber
Spare parts
Preventive maintenance
············
Gas room
Vaporizer skid
Vacuum pump skid
Sterilizer
Control room
·····
MODELS
EOS 1x4
EOS 1x5
EOS 1x6
EOS 1x7
EOS 1x8
EOS 1x10
EOS 1x12
EOS 1x16
EOS 2x4
EOS 2x5
EOS 2x6
EOS 2x7
EOS 2x8
EOS 2x10
EOS 2x12
EOS 2x16
4
5
6
7
8
10
12
16
8
10
12
14
16
20
24
32
3.800
4.700
5.600
6.500
7.400
9.200
11.000
14.600
3.800
4.700
5.600
6.500
7.400
9.200
11.000
14.600
1.440
2.100
2.760
SIN
GL
E L
INE
DU
AL
LIN
E
Nº OF EURO PALLET CHAMBER WIDTH (mm) CHAMBER DEPTH (mm) CHAMBER HEIGHT (mm)
* Dimensions could be adjusted according customer requirements.
Inox torres design and manufacture Superheated Water Sterilizers for the sterilization of any liquid placed into closed containers (bottles, IV bags, etc.)
The superheated water sterilization equipment are cylindrical type, with rectangular doors in order to be adapted to the trolleys. The doors can be automatically opened or closed from the SCADA.
The optimised water recirculation system works thanks to an efficient centrifugal water pump and a main heat exchanger (for heating and cooling the load). A special plenum is installed inside the chamber in order to allow a perfect water distribution to the product, ensuring an excellent temperature uniformity.
Our standard designs go from a 1.000l up to 32.000l (useful volume), but the dimensions and design can be adjusted according final user needs.
Description: Several advantages for our superheater water sterilizers:
Flexible design, according final user requirements.
High efficiency, optimizing energy consumption and cycle time.
Use of well known brands for all the components.
A perfect temperature uniformity.
Well proven control system using SCADA and able to improve the cycles thanks to automatic control of the pressure (guaranteeing no deformation on the product to sterilize).
High quality equipment based on optimized GMP design, fulfilling the most stringent European standards.
·
·
·
·
·
·
www.inoxtorres.com | T: +34 93 863 43 82 | E: [email protected]
Design / Manufacturing / Installation / CS
SUPERHEATEDWATER
STERILIZERS
For INOXTORRES, safety should be a priority for personal as well as for the Sterilization equipment.
For that, the equipment have many technical features an specifications leading to a safe use:
· Full instrumentation (safety valves, transducers, pressure switches, etc…).
· Automatic door locking system.
· Emergency stop on the frontal panel.
· Photocells on each doors for an optimum protection during opening and closing operations.
· Control system giving visual and audible alarms.
SAFETY:
OPTIONS:
RANGE OF PRODUCT “LPS Models” * :
Steam + air sterilization cycle.
Vertical doors.
Mechanical polishing Ra<0,6.
Pit mounting.
Automatic loading and unloading system.
Lateral panels.
Software validation.
Chart recorder.
Limit switches on pneumatic valves.
Trays, Carts and transfer trolleys.
··········
MODELS
LPS 101010
LPS 101020
LPS 101030
LPS 101220
LPS 101230
LPS 121220
LPS 121230
LPS 121240
LPS 121520
LPS 121540
LPS 121560
LPS 121580
LPS 1215100
LPS 151520
LPS 151540
LPS 151560
LPS 151580
LPS 1515100
LPS 1515120
LPS 1515140
1.000
1.000
1.000
1.000
1.000
1.200
1.200
1.200
1.200
1.200
1.200
1.200
1.200
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.000
1.000
1.000
1.200
1.200
1.200
1.200
1.200
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.000
2.000
3.000
2.000
3.000
2.000
3.000
4.000
2.000
4.000
6.000
8.000
10.000
2.000
4.000
6.000
8.000
10.000
12.000
14.000
1.000
2.000
3.000
2.400
3.600
2.880
4.320
5.760
3.600
7.200
10.800
14.400
18.000
4.500
9.000
13.500
18.000
22.500
27.000
31.500
256 uds
544 uds
864 uds
816 uds
1.296 uds
1.020 uds
1.620 uds
2.160 uds
1.360 uds
3.000 uds
4.400 uds
5.880 uds
7.020 uds
1.728 uds
3.888 uds
5.720 uds
7.776 uds
9.464 uds
12.096 uds
13.520 uds
USEFUL WIDTH (mm) USEFUL HEIGHT (mm) USEFUL DEPTH (mm)USEFUL CHAMBER
VOLUME (l)APPROX LOAD CAPACITY
(500ML - 96x48x214)
* Dimensions could be adjusted according customer requirements.
www.inoxtorres.com | T: +34 93 863 43 82 | E: [email protected]