Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
1
/
Save these instructions for future reference.
B
CAUTION• Keepclothing,hairandfaceawayfromflame.• Donotplacetorchundercoveredshelterorumbrella,nearpedestriantrafficorcombustiblessuchaswoodstructures,fuel,clothingordryvegetation.
• DonotuseFuelCanisteroutsideofGlowingTableTorch.
• Useonlyinawellventilatedarea.• Donotuseinwindyconditions.• DonottipGlowingTableTorchasfuelcanspillandcausefireorseriousinjury.
CA
GlowingTableTorchActivation: • Utilize Glowing LED option at night for optimal
illumination effect (see FIG 1). - Push once for white LED. - Push twice for multi-colored LED. - Push three times to turn off.
InstructionsandWarningsProductBoxContents:
A. 1 Glowing Table Torch (requires 2 AA batteries - included)
B. 1 Snuffer CapC. 1 Fuel Canister with Flame Guard
Glowing Table Torch
WARNING• Readandunderstandtheseinstructionsbeforeuse!
• Foroutdoortabletopuseonly!• Keepoutofreachofchildrenandpets.• Neverleaveaburningtorchunattended.• Hotwhileinuse.• Topreventburninjuries,snuffandallowtocoolfor30minutesbeforehandling,refillingorcleaning.
• FailuretofollowInstructionsandWarningsmayresultinseriousinjuryorpropertydamage.
• UseonlyTIKI®Brandtorchfuel-Donotusegasolineorotherflammablefuel.
• Donotoverfill.• Neverfillaburningtorch.• Beforerefilling,carefullyplacetheSnufferCapovertheflametoextinguish.
• Torchfuelisharmfulorfatalifswallowed.Containspetroleumhydrocarbons.
• ReadWarningsontorchfuelcontainercarefully.
GlowingTableTorchFuel-Options
Glowing Table Torch Fuel Canister• FillwithTIKI® Brand
OFF!® BiteFighter® or Citronella Torch Fuel.
/
FIG1
2
Refilling: • Carefully place the metal Snuffer completely over the
Wick until the flame is extinguished – DO NOT BLOW OUT (see FIG 5). Allow to cool for 30 minutes before handling and refilling.
• Remove the Fuel Canister from the Glowing Table Torch Globe. • Unscrew the metal Flame Guard from the Fuel
Canister (see FIG 2). • FillwithTIKI® Brand Torch Fuel – DO NOT OvERFILL (see FIG 3). • Reattach the metal Flame Guard to the Fuel Canister – DO NOT
OvERTIGhTEN (see FIG 2). • Wipe away any spilled fuel before lighting.
Extinguishing: • Carefully place the metal Snuffer completely over the
Wick until the flame is extinguished – DO NOT BLOW OUT (see FIG 5).
Note: Leave the Snuffer on the Glowing Table Torch to prevent water contamination.
Note: If the Fuel becomes contaminated with water, the Wick and Fuel must be replaced and properly disposed of in accordance with local laws and regulations.
/
FIG5
FillingandLighting: • Remove the Fuel Canister from the Glowing Table Torch
Globe. • Unscrew the metal Flame Guard from the Fuel
Canister (see FIG 2). • FilltheFuelCanisterwith3oz.ofTIKI® Brand Torch
Fuel - DO NOT OvERFILL (see FIG 3). • Reattach the metal Flame Guard to the Fuel
Canister - DO NOT OvERTIGhTEN (see FIG 2). • Wipe away any spilled fuel before lighting. • Place the Fuel Canister into the Glowing Table Torch Globe. • Allow the Wick to become saturated with fuel before lighting. • UseaTIKI® Brand Lighter or long fireplace match to light the
Glowing Table Torch (see FIG 4).
/
FIG4
1/2” (13 mm)FIG2
ProperWick
Position
1/2” (13 mm)
FIG3
Fuel Fill
Level
02/13 4000010N13
©2013LamplightFarmsInc.•W140N4900LillyRd.,MenomoneeFalls,WI53051•www.tikibrand.com•www.lamplight.com TIKI® & PARADISEINYOURBACKYARD®areregisteredtrademarksofLamplightFarmsInc.
OFF!®isaregisteredtrademarkofS.C.Johnson&Son,Inc.usedunderlicense.DesignedandEngineeredinMenomoneeFalls,Wisconsin•AssembledinChina•CustomerService:1-888-473-1088
Storage: • Store Fuel in original Fuel Bottle with Cap secured, and dispose of any
unwanted Fuel in accordance to local laws and regulations. • Store in upright position (see FIG 9). • For best results, store product away from the weather
conditions when not in use. • Remove batteries for long term storage.
1/2” (13 mm)FIG8
WickReplacement: • Carefully remove the Wick from the Flame
Guard (see FIG 7). Properly dispose of the Wick in accordance with local laws and regulations.
• Replace the Wick with a new TIKI® Torch Wick and position the Wick with 1/2" exposed (see FIG 8).
• Trim as required.
ProperWick
Position
FIG7
BatteryReplacement: • Remove the cover retaining screws and open the battery
compartment cover (see FIG 6). • Remove the old batteries carefully. • Replace Batteries with (2) AA Batteries. • Replace the battery compartment cover and retaining
screws.
AA
AA
_
+
_
+
FIG6
/
FIG9
CAUTION• Donotmixstandard,alkaline,andrechargeablebatteries.
• Donotmixoldandnewbatteries.• Removebatteriesforstorage.• Disposeofbatteriesproperly.
Cleaning: • Use damp cloth to remove debris from glass as needed.