SB2014 rev 3 - pipehangers.com accordance with MSS SP‐58, MSS SP‐ 69, MSS SP‐127, ASME B31.1, ASME B31.3, ASME B31.7, ASME Section IX, WW‐H‐171E, A‐A‐1192A and FEMA 414

Catalog SB2014

SEISMICBRACING

Introduction

Since1913Carpenter&PatersonInc.hasspecializedinthedesign,manufacture,anddistributionofacompletelineofpipesupports,piperestraints,vibrationisolationdevices,seismiccontrolsystemsandmanyrelatedproductsspecificallydesignedinaccordancewithMSSSP‐58,MSSSP‐69,MSSSP‐127,ASMEB31.1,ASMEB31.3,ASMEB31.7,ASMESectionIX,WW‐H‐171E,A‐A‐1192AandFEMA414.

Asanindustryleaderwithaninternationalreputation,ourproductshavebeenspecifiedandinstalledonmajorpowergeneratingstations,petrochemicalplants,watertreatmentplants,pharmaceuticalandindustrialprojectslocatedwithintheUnitedStatesandthroughouttheworld.

Oursalesandengineeringgroupsofferadiversifiedrangeofexperienceintheareasofproductdesign,engineering,specalizedapplicationsandareavailabletodiscussyourindividualrequirementsandthebasisoffunction,reliabilityandmanufacturingeconomy.

Pipe Bracing

Pages 2 ‐ 3

Attachments

Pages 4 ‐ 9

Hangers

Pages 10 ‐ 11

Channel & Brackets

Pages 12 ‐ 13

Cable Attachments

Pages 14 ‐ 16

Fasteners

Pages 17 ‐ 23

SEISMIC BRACINGwww.carpenterandpaterson.com [email protected]

Pipe Bracing

Standard Sway Brace Attachment

Figure SB1 Sch. 40

Pipe Sizes Pipe Sizes01.25X01 01X01

01.25X01.25 01X01.25

01.25X01.50 01X01.50Function: Designed for bracing pipe against sway and 01.25X02 01X02

seismic disturbances in accordance with NFPA 13. 01.25X03 01X03Approvals: Underwriters Laboraties listed for the US & Canada 01.25X04 01X04

Materials: Electro‐galvanized Carbon Steel 01.25X06

Rigid Sway Brace Attachment

Figure SB2Pipe Sizes Pipe Sizes01.25X02.50 01X02.50

01.25X03 01X03

01.25X04 01X04Function: Designed for bracing pipe against sway and 01.25X06 01X06

seismic disturbances in accordance with NFPA 13. 01.25X08 01X08Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel

Heavy Sway Brace Attachment

Figure SB3

Pipe Sizes Pipe Sizes02X02.50 01.50X02.50

02X03 01.50X03Function: Designed for bracing pipe against sway and 02X04 01.50X04

seismic disturbances in accordance with NFPA 13. 02X06 01.50X06Approvals: Underwriters Laboraties listed for the US & Canada 02X08 01.50X08

Materials: Electro‐galvanized Carbon Steel

SEISMIC BRACING

Page 2

Pipe Bracing

Supporting Pipe Attachment

Figure SB4Pipe Sizes Pipe Sizes0.75 03

01 03.50

01.25 04Function: Designed for suspension and bracing pipe against sway 01.50 05

and seismic disturbances in accordance with NFPA 13. 02 06Approvals: Underwriters Laboraties listed for the US & Canada 02.50 08


Clamping Pipe Attachmant

Figure SB5Pipe Sizes Pipe Sizes0.75 03

01 03.50

01.25 04

Function: Universal swivel design for bracing pipe against sway 01.50 05

and seismic disturbances in accordance with NFPA 13. 02 06

Approvals: Underwriters Laboraties listed for the US & Canada 02.50 08


Supporting Pipe Attachment

Figure SB6Pipe Sizes Pipe Sizes01.25X02.50 01X02.50

01.25X03 01X03

01.25X04 01X04

Function: Universal swivel design for bracing pipe against sway 01.25X05 01X05

and seismic disturbances in accordance with NFPA 13. 01.25X06 01X06

Approvals: Underwriters Laboraties listed for the US & Canada 01.25X08 01X08


SEISMIC BRACING

Page 3

Attachments

SwIvel Brace Fitting

Figure SBF1Pipe Sizes01

01.25

Function: Designed for attaching to structure or braced pipe used

with seismic bracing in accordance with NFPA 13. Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel

Straight Brace Fitting

Figure SBF2Pipe Sizes01


with seismic bracing in accordance with NFPA 13.Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel

No‐Thread Straight Fitting

Figure SBF3

Pipe Sizes

01

01.25


with seismic bracing in accordance with NFPA 13.Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel

SEISMIC BRACING

Page 4

Attachments

Universal Swivel Brace Attachment

Figure SBF4Sizes

1/2" mounting Hole

Braces up to 8" pipe

Brace Member1" to 2" Pipe


with seismic bracing in accordance with NFPA 13.

Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Carbon Steel

No‐Thread Swivel Attachment

Figure SBF5Sizes01

01.25




4‐Way Longitudinal Sway Brace Attachment

Figure SBF6 Sizes01X01

01X01.25

01.25X01.25




SEISMIC BRACING

Page 5

Attachments

Sway Brace Bar Joist Adapter

Figure SBF7Sizes3/8" Beam Max

Up to 8" Pipe

Function: Sway brace adapter designed to provide greater load capacities by providing

multiple fastener attachments in accordance with NFPA 13.

Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Ductile Iron

Sway Brace Multi‐Fastener Adapter

Figure SBF8Hole Sizes0.50 (1/2") to

0.75 (3/4")

Braces up to 8" PS

Function: Sway brace adapter designed to provide greater load capacities by

providing multiple fastener attachments in accordance with NFPA 13.

Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Electro‐galvanized Low Carbon Steel 2x2x1/4

Rod Swivel Attachment

Figure SBF9Rod Sizes0.38 (3/8")

Function: Swivel, end restraint for structural attachment, during

seismic disturbances in accordance with NFPA 13.


SEISMIC BRACING

Page 6

Attachments

Sway Brace Bar Joist Adapter

Figure SBF10Beam Size

Thickness3/8" Min

1‐1/4" Max

Function: Designed for bracing pipe against sway and Braces

seismic disturbances in accordance with NFPA 13. up to 8" pipe

Approvals: Underwriters Laboraties listed for the US & Canada

Materials: Electro‐galvanized Ductile Iron

Steel Eye Socket

Figure SES

Rod Sizes3/8"

Function: Designed to prevent upward movement of pipe during

seismic disturbances in accordance with NFPA 13.


Surge Restrainer

Figure SR1Rod Sizes3/8"

Used with Figue 800FP sizes 3/8 to 2"

Function: Designed to prevent upward movement of pipe duringseismic disturbances in accordance with NFPA 13.

Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Powder Coated Carbon Steel

SEISMIC BRACING

Page 7

Attachments

Seismic Rod Stiffiner

Figure SRSRod Sizes3/8‐5/8"

Function: Designed to secure Multi‐Strut© channel to

threaded rod hanger for vertical seismic bracing.


C‐Clamp

Figure 47Rod Sizes0.38 (3/8")

0.50 (1/2")

Function: Designed to attach to the botom flange of a steel beam.

A locking nut prevents loosening due to vibration.

Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Plain or Electro‐galvanized Carbon Steel

C‐Clamp Retaining Clip

FIGURE 22Length

4‐1/2"

6"

8"

Function: Designed for use with Figure 47 to prevent movement 10"

of the C‐Clamp due to vibration after installation. 12"

Approvals: Underwriters Laboraties listed for the US & Canada 14"

Materials: Plain or Electro‐galvanized Carbon Steel

SEISMIC BRACING

Page 8

AttachmentsTop Beam Clamp with Lock Nut

Figure 192 & 192WRod Sizes0.38 (3/8")

0.50 (1/2")

0.63 (5/8")**

Function: Designed to attach to the top or botom flange of a steel 0.75 (3/4")**

beam. A locking nut prevents loosening due to vibration. 0.88 (7/8")**


Top Beam Clamp Retaing Clip

Figure 192RSLength4‐1/2"

6"

8"

Function: Designed for use with Figure 192 or 192W to prevent movement 10"

of the beam clamp due to vibration after installation. 12"



Retrofit Retaining Clip

Figure 192RSRLength

4‐1/2"

6"

8"

Function: Designed for use with Figure 192 or 192W to prevent movement 10"

of the beam clamp due to vibration after installation. 12"



SEISMIC BRACING

** Jr. Only (Fig.

192 also called

Junior Top

Beam clamp)

Page 9

HangersAdjustable Swivel Ring

Figure 800 & 800FP Pipe Sizes Pipe Sizes3/4"** 3"

1"** 3‐1/2"

1‐1/4"** 4"

Function: Designed for the support of non‐insulated pipe lines. 1‐1/2"** 5"

Swivel nut provides gripping for adjusting elevation. 2"** 6"

Approvals: Underwriters Laboraties listed for the US & Canada 2‐1/2" 8"

Materials: Electro‐galvanized Carbon Steel ** 800FP only

Clevis Hanger

Figure 100D & 100D EPipe Sizes2‐1/2"

3"

3‐1/2"

Function: Designed to support stationary lines from above, allowing 4"

for 1" to 1‐1/2" of vertical adjustment. 5"


Materials: Plain or Electro‐galvanized Carbon Steel 8"

Extension Riser Clamp

Figure 126D & 126D E Pipe Sizes Pipe Sizes

3/4" 3"

1" 3‐1/2"

1‐1/4" 4"

Function: Desinged for the support or steadying of vertical 1‐1/2" 5"

pipe risers. 2" 6"

Approvals: Underwriters Laboraties listed for the US & Canada 2‐1/2" 8"


SEISMIC BRACING

Page 10

HangersCeiling Flange

Figure 85RTRod Sizes3/8"

1/2"

Function: Designed for attaching a rod to a wooden member.

Approvals: Underwriters Laboraties listed for the US & CanadaMaterials: Plain or Electro‐galvanized Malleable Iron

Stamped Ceiling Flange

Figure 85RTSTPRod Sizes3/8"

Function: Desinged for attaching a rod to a wooden member.


Stamped Side Beam

Figure 153SRod Sizes

3/8"

Function: Desinged for attaching a rod to a wooden member.

Approvals: Underwriters Laboraties listed for the US & Canada


SEISMIC BRACING

Page 11

Multi‐Strut®Channel

Strut Channel

Figure M112‐M164Strut SizesM112 3‐1/4"

M122 2‐7/8"

M132 1‐5/8"

M164 13/16"

Function: Designed for uses as a trapeze and or rigid bracing

of pipe against sway and seismic disturbances.

Approvals: MSS SP‐127


Rigid Brackets

2‐Hole Seismic Clip

Figure 2HSC2Sizes9/16" hole

Function: Designed for attaching Multi‐Strut© channel to structure

and or seismic brace in accordance with NFPA 13.



3‐Hole Seismic Bracket

Figure 3HSBSizes0 (9/16 Hole)

1 (11/16Hole)

Function: Designed for attaching Multi‐Strut© channel to structure 2 (15/16Hole)

and or seismic brace in accordance with NFPA 13. 3 (1‐5/16Hole)



SEISMIC BRACING

Page 12

Hinged Brackets

Seismic Bracket 2‐Hole Hinge

Figure SH200Sizes9/16 Hole







11/16 Hole

13/16 Hole











SEISMIC BRACING

Page 13

Cable Attachments

Seismic Cable Brace

Figure SCBSizes0 (9/16" Hole)

1 (11/16" Hole)

2 (13/16"Hole)

Function: Designed for attaching wire rope cable to structure 3 (1‐5/16"Hole)




Seismic Cable Brace With Hook

Figure SCBHSizes0 (3/8" Hook)

1 (5/8" Hook)

2 (7/8" Hook)

Function: Designed for attaching wire rope cable to structure 3 (1‐1/8" Hook)




Galvanized Cable

Figure GACSizes1/8 X 250' Roll

3/16 X 250' Roll

1/4 X 250' Roll

Function: Used for attaching seismic attachment to structure 3/8 X 250' Roll




SEISMIC BRACING

Page 14

Cable Attachments

Seismic Cable Clamps

Figure SCCSizes1/8

3/16

1/4

Function: Used for securing seismic wire rope cable 3/8

in accordance with NFPA 13.



Wire Rope Thimble

Figure WRTSizes1/8

3/16

1/4

Function: Used for securing seismic wire rope cable 3/8

in accordance with NFPA 13.



Wire Rope Cutter

Figure HFWRC

Function: Used for cutting seismic wire rope cable.

Approvals: NoneMaterials: Carbon Steel

SEISMIC BRACING

Page 15

Cable Attachments

Gripple® Seismic Bracing System*

Figure GSLockable with cable sizes12 (1/8")10, 15 & 20' Loops

19 (3/16 10, 15 & 20' Loops

25 (1/4")10, 15 & 20' Loops

End fitting and bracket sizes4 (3/8")

5 (1(2")

6 (5/8")

8 (3/4")

10 (1")

* Sold as kits, which consist of one Lockable, one cable with end fitting and one loose bracket.

End Fitting available with 45° eyelet, standard single bracket or standard double bracket.

Loose bracket available in standard, double standard, retrofit or double retrofit.

Function: Gripple Seismic Restraint Systems are specifically designed and engineered to brace

and secure nonstructural equipment and components within a building or structure

to minimize earthquake damage to suspended components

Approvals: UL NEBS GR 63 Core CertificationMaterials: Electro galvanized carbon steel

Gripple® Seismic Installation Manual should be

consulted when designing or installing seismic

bracing systems using Gripple Seismic kits.

SEISMIC BRACING

Page 16

Part Rod Base Nut

Number Size Material Driver

SWG20 3/8" Wood #14SW

SWG25‐380 3/8" Wood #14SW

SWDR1‐1/2 3/8" Steel #14SW

SWDR516 3/8" Steel #14SW

SWXP35 3/8" Purlin UXPIT

SWC20 3/8" Concrete #14SW

Function: UL tested to Standard 203A to meet the requirements

of branch/end of line restraint using 3/8" or 1/2"

all thread rod to eliminate lateral sway bracing

per NFPA 13. Up to Schedule 40 pipe 2" or less.

Approvals: Underwriters Laboraties UL 203A File EX 5098Materials: Carbon Steel

SWG SWDR SWXP SWC

Part Rod Base Nut

Number Size Material Driver

SH‐GST20 3/8" Wood #14SH

SH‐CST20 3/8" Concrete #14SH

SXP20 3/8" Steel UXPIT

SXP35 3/8" Purlin UXPIT

SH‐GST2.0 1/2" Wood #14SH

SH‐CST2.0 1/2" Concrete #14SH

SH‐TEK5.0 1/2" Steel #14SH

SXP2.0 1/2" Metal Deck UXPIT

UXPIT #14SW #14SH SXP3.5 1/2" Purlin UXPIT

UNIVERSAL RED ORANGE

ITW CCNA literature, approvals and submittals

should be consulted when designing or installing

seismic bracing systems using ITWBuildex products.

GST CST XP TEK

Sidewinder

Swivel Head

SEISMIC BRACING

Page 17

Strength Design+ Anchoring Systems

Power‐Stud™+

Sizes SD1 SD2 SD4 SD6

0.25X01.75 * * *0.25X02.25 * * *0.25X03.25 * * *0.38X02.25 * * *0.38X02.75 * * *

Function: One piece, fully threaded, wedge style 0.38X03 * * * *anchor for use in solid concrete. 0.38X03.50 * * * *

0.38X03.75 * * * *

Materials: Carbon and/or Stainless Steel 0.38X05 * * * *0.38X07 *0.50X02.75 * * *0.50X03.75 * * * *0.50X04.50 * * * *

Carbon steel body and carbon steel clip. 0.50X05.50 * * * *CODE LISTED: **ICC‐ES ESR 2818 0.50X07 * * * *

0.50X08.50 * *0.63X03.50 * * *0.63X04.50 * * * *0.63X05 * * * *

Carbon steel body and stainless steel clip. 0.63X06 * * * *CODE LISTED: **ICC‐ES ESR 2502 0.63X07 * * * *

0.63X08.50 * * * *0.63X10 *0.75X04.25 * * *0.75X04.75 * * *

Type 304 stainless steel body plus stainless steel clip. 0.75X05.50 * * * *

CODE LISTED: **ICC‐ES AC193 0.75X06.25 * * * *0.75X07 * * * *0.75X08.50 * * * *0.75X10 * *0.75X12 *

Type 316 stainless steel body plus stainless steel clip. 0.88X06 *CODE LISTED: **ICC‐ES AC193 0.88X08 * *

0.88X10 *01X06 * *01X09 * *

Powers® Fasteners literature, approvals and submittals 01X12 * *should be consulted when designing or installing 01.25X09 *seismic bracing systems using Powers products. 01.25X12 *

SD1

SD2

SD4

SD6

SEISMIC BRACING

Code Listed: **See Each Type

Page 18


Wedge‐Bolt™+

Sizes0.25X01.250.25X01.750.25X02.250.25X030.38X01.75

Function: One piece, heavy duty hex head anchor for use 0.38X02.50in solid concrete. Vibration‐resistant. 0.38X03

0.38X04

Materials: High Strength Carbon Steel 0.38X050.38X060.50X020.50X02.500.50X030.50X040.50X060.50X060.50X06.500.50X080.63X030.63X040.63X050.63X060.63X080.75X030.75X040.75X050.75X06

0.75X080.75X10

Powers® Fasteners literature, approvals and submittalsshould be consulted when designing or installingseismic bracing systems using Powers products.

SEISMIC BRACING

Code Listed: ICC‐ES ESR‐2526

Page 19


Power‐Bolt™+

Sizes0.25X010.25X01.750.25X030.31X01.750.31X02.50

Function: Heavy duty sleeve style undercut anchor for use 0.31X03.50in solid concrete. Vibration‐resistant. 0.38X01.88

0.38X02.25

Materials: Carbon and/or Stainless Steel 0.38X030.38X03.330.38X040.50X02.750.50X03.750.50X04.750.50X05.750.63X030.63X040.63X050.63X060.63X08.500.75X03.250.75X04.250.75X05.250.75X07.25

0.75X08.25Flat Head 0.38X03.75Flat Head 0.38x05Flat Head 0.38x06Flat Head 0.50x05

Flat Head 0.63x05.50


SEISMIC BRACING

Code Listed: ICC‐ES AC193

Page 20


Tapper®+

Sizes0.19X01.250.19X01.750.19X02.250.19X02.750.19X03.25

Function: Screw anchor for light to meduim duty applications. 0.19X03.75Perma‐Seal for corrosion resistance. 0.19X04

0.25X01.25

Materials: Carbon Steel 0.25X01.750.25X02.250.25X02.750.25X03.250.25X03.750.25X04

Available in both Hex Washer Head & Phillps Flat Head 0.25X06

Smart DI™+ Anchor (Drop‐In)

Sizes0.25 *

Function: Machine bolt anchor for use in solid concrete, 0.38 *hard stone and solid brick. 0.50 *,+

0.63

Materials: Carbon and/or Stainless Steel 0.75 +

Safe‐T+Pin™

SizesFunction: One piece nail drive anchor for use in concrete, 0.25X01.38

stone and brick. 0.25X02.50

Materials: Carbon Steel

Powers® Fasteners literature, approvals and submittals

should be consulted when designing or installingseismic bracing systems using Powers products.

SEISMIC BRACING




Also available (*)lipped or with (+)coil thread

Page 21


Vertigo™+

Rod Screw

Function: One piece threaded fastening system for concrete. Size Size & Lentgh

0.25 0.38X02.13

Materials: Carbon Steel 0.38 0.38X02.14

Snake+™

Sizes

Function: Machine bolt anchor for use in solid concrete. 0.25

0.38

Materials: Carbon Steel 0.50

Requires special setting tool

Atomic Undercut™

Sizes*,=

Function: Undercutting anchor in cracked and uncracked concrete. +

*,=

Materials: Carbon Steel +

0.50x09.75 +

0.63X07.75 *,=

Available in both Standard and Through Bolt type 0.63X10.75 +

Materials (*) Grade A36 +

(+) Grade A193 B7 *,=

(=) Stainless type 316 +


SEISMIC BRACING

0.50X08

0.38X05.50

0.38X06.75

0.50X07

0.75X13.63

0.75X08.63

0.63X12.25


Code Listed: ICC‐ES ESR‐2272


Page 22

ISAT's Blue Banger Hanger

SizesSDI 1/4, 3/8 & 1/2"

3/8, 1/2 & 5/8"

5/8 & 3/4"

PIP 1/4, 3/8 & 1/2"

3/8, 1/2 & 5/8"

5/8 & 3/4"

RDI 3/8, 1/2 & 5/8"

Function: Multi‐threaded rod hanger anchor, fully cracked concret tested

for vertical and dynamic static loads.

Code Listed: UL listed, FM and OSHPD Approved. OPA‐0485‐07

Materials: Carbon Steel, Plastic

ISAT® literature, approvals and submittals

should be consulted when designing or installing

seismic bracing systems using ISAT products.

SEISMIC BRACING

Page 25

CARPENTER & PATERSON, INC.

TERMS and CONDITIONS of SALEEffective 10-1-2014

8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities.

9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $150.00 will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors.

10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees.

Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller.

In accordance with our product development program, we reserve the right to revise the design and application of our products without notification. For latest product information, please contact the nearest Carpenter & Paterson office.

7. WARRANTY: Carpenter & Paterson, Inc. warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product.

Where engineering design or fabrication work is supplied, Buyer’s acceptance of Seller’s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson’s product warranty. The foregoing constitutes the Purchaser’s sole and exclusive remedy under Carpenter & Paterson warranty.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MERCHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTIOUS ACT OR OMISSION.

The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification.

1. PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.

2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller’s acceptance of an order, but seller assumes no responsibility or liability, and will accept no backcharge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay.

3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller’s responsibility ceases and the title passes on delivery to the carrier.

4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded).

5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-to-order products (either published or unpublished) are non-cancelable / non-returnable.

6. PRODUCT APPLICATION: Seller’s products are intended for installation and service as illustrated or described in seller’s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication.

001/020 770 ‐ CSBQIK 010 1000 SB1030/040 776 ‐ CSBQIKCSE 015 1001 SB2035 ‐ ‐ ‐ ‐ ‐ SB3‐ ‐ B386 ‐ 040 4B SB4‐ ‐ ‐ CSBEZU 031 4L SB5

078/410 775 ‐ ‐ 050 ‐ SB6070 771 ‐ ‐ 025 910 SBF1072 ‐ ‐ ‐ 890 975 SBF2078 ‐ ‐ ‐ 049 ‐ SBF3076 774 ‐ CSBUNIV 030 980 SBF4077 ‐ ‐ ‐ 051 909 SBF5079 ‐ ‐ TP240 054 907 SBF6087 778 ‐ CSBBARJEG 035 825/825A SBF7080 779 ‐ CSBMA 025 906 SBF8615 777 ‐ ‐ 020 75 SBF9086 772 ‐ CSBIB 045 800 SBF10535 ‐ B3223 38 37 ‐ SES310 773 ‐ LHSR6 055 25 SR17600 AS3500 SC228 VS 7600 98 SRS‐ 95 B351L 200 250 64 47‐ 89 B3362‐5 255C 259 ‐ 22

100 92 B3034 300 350 65 192105 94 B3033 310 360 66 192W160 89X 3367 300C 359 69 192RS162 ‐ ‐ 34SL 358 69R 192RSR‐ ‐ B3170 100 151 2 800 E

300 69 B3170NF 115 141 200 800FP E372 260 B3100 ‐ 450 ‐ 100D372 260 B3100 401 451 ‐ 100D E400 261 B3373 ‐ 550 6 126D400 261 B3373 510 551 6 126D E 611 128R B3199R 365M 940 78 85RT610 ‐ ‐ 365 940‐S ‐ 85RTSTP552 207 B3060L 32B 906 56 153S‐ AS100 B11 E12 1501‐1542 ‐ M112‐ AS150 B12 D12 1601‐1642 ‐ M122‐ AS200 B22 & B24 A12 & A14 1001‐1142 ‐ M132‐ AS300 B32 B12 1701‐1742 ‐ M142‐ AS500 B52 & B54 C12 & C14 1201‐1342 ‐ M164‐ ‐ ‐ ‐ ‐ ‐ 2HSC‐ ‐ ‐ ‐ ‐ ‐ 3HSB‐ AS9402 B335‐1 ‐ ‐ 912 SH200‐ AS9403 B335‐2 ‐ ‐ 913 SH300‐ AS9404 B335 ‐ ‐ 914 SH400‐ ‐ ‐ ‐ ‐ 990 SCB‐ ‐ ‐ ‐ ‐ 991 SCBH‐ ‐ BKW SLD ‐ ‐ GAC‐ ‐ ‐ ‐ ‐ ‐ SCC‐ ‐ ‐ ‐ ‐ ‐ WRT‐ ‐ BKCC ‐ ‐ ‐ HFWRC

TOLCO

CROSS REFERENCEC&PAFCON ANVIL B‐LINE ERICO PHD

MASSACHUSETTS MARYLAND NEW JERSEY (South)225 Merrimac Street 8941 D'Arcy Road 3900 River Road

Woburn, MA 01801 Upper Marlboro, MD 20774 Pennsauken, NJ 08110

Telephone: (781) 935‐2950 Telephone: (301) 333‐4631 Telephone: (856) 488‐1988

Fax: (781) 935‐7664 Fax: (301) 333‐4638 Fax: (856) 488‐0824

CALIFORNIA CANADA5097 Zambrano Street 921 Barton Street, Unit 3

City of Commerce, CA 90040 Stoney Creek, ON L8E 5P5

Telephone: (323) 622‐1830 Telephone: (905) 664‐6866

Fax: (323) 622‐1837 Fax: (905) 664‐2751

NEW JERSEY (North) PENNSYLVANIA LOUISANIA369 Jefferson Avenue 484 Galiffa Drive 434 Latigue Road

Saddle Brook, NJ 07663 Donora, PA 15033 Waggaman, LA 70094

Telephone: (973) 772‐1800 Telephone: (724) 379‐8461 Telephone: (504) 431‐7722

Fax: (973) 772‐1833 Fax: (724) 379‐8463 Fax: (504) 431‐7900

EXECUTIVE OFFICES

CARPENTER & PATERSON, INC.225 Merrimac Street, Woburn, MA 01801

Tel: (781) 935‐2950 • Fax: (781) 935‐7664

e‐mail: [email protected]

www.pipesupports.com

C&P SEISMIC BRACINGCONTACT YOUR NEAREST CARPENTER & PATERSON LOCATION AT:

SALES OFFICES AND WAREHOUSES

SALES OFFICES, WAREHOUSES & MANUFACTURING PLANTS

CARPENTER & PATERSON, INC. DESIGNERS • ENGINEERS • MANUFACTURERS

Documents

SB2014 rev 3 - pipehangers.com accordance with MSS SP‐58, MSS SP‐ 69, MSS SP‐127, ASME B31.1, ASME B31.3, ASME B31.7, ASME Section IX, WW‐H‐171E, A‐A‐1192A and FEMA 414