-
Assessment Manager: GL Page 1 of 24
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertsey
Lane, Staines-upon-Thames, TW18 3HR, UK
0113
Accredited to ISO/IEC 17065:2012 to provide
product conformity certification
British Board of Agrément
Issue No: 025 Issue date: 20 October 2017
PO Box No 195
Bucknalls Lane
Garston
Watford
Hertfordshire
WD25 9BA
Contact: Mrs Claire Aizlewood
Tel: +44 (0)1923 665 300
Fax: +44 (0)1923 665301
Website: www.bbacerts.co.uk
Locations where certification activities covered by the above
Accreditation Standard are undertaken
British Board of Agrément PO Box 195 Bucknalls Lane Garston
Watford Herts. WD25 9BA United Kingdom
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 2 of 24
DETAIL OF ACCREDITATION
Product Standard
At the last review of Document BBA 001 the following standards
were included within the scope of accreditation. Other standards
may have since been added using the flexible scope
arrangements.
Building Systems and Kits BBA Technical Specifications 001 to
0013 and BBA Document BBA 001
Ceiling Products
Concrete and Plaster Products
Heating and Ventilation Products and Systems
Finishes
Floor Products
Highway Works, Products and Systems
Jointing Products, Components and Materials
Masonry Products
Roof and Roofing Products and Systems
Drainage and Plumbing Products and Systems
Wall and Cladding Products and Systems
Window, Door and Opening Products and Systems
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 3 of 24
Product Standard
Environmental Profiles of Construction Products - BRE Scheme
Document SD 028
Metal Anchors for use in Concrete Part 1: Anchors in General
(97/177/EC)
ETAG 001
Metal Anchors for use in Concrete Part 2: Torque controlled
Expansion Anchors (97/177/EC)
ETAG 001
Metal Anchors for use in Concrete Part 3: Undercut Anchors
(97/177/EC)
ETAG 001
Metal Anchors for use in Concrete Part 4: Deformation-Controlled
Expansion Anchors (97/177/EC)
ETAG 001
Metal Anchors for use in Concrete Part 5: Bonded Anchors
(97/177/EC)
ETAG 001
Metal Anchors for use in Concrete Part 6: Anchors for Multiple
use for Non-Structural Applications (97/177/EC)
ETAG 001
Structural Sealant Glazing Systems (SSGS) Part 1: Supported and
Unsupported Systems (96/582/EC)
ETAG 002
Structural Sealant Glazing Systems (SSGS) Part 2: Coated
Aluminium Systems (96/582/EC)
ETAG 002
Structural Sealant Glazing Systems (SSGS) Part 3: Systems
incorporating Profiles with a Thermal Barrier (96/582/EC)
ETAG 002
International Partition Kits for use as Non Load-Bearing Walls
(2001/596/EC)
ETAG 003
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 4 of 24
Product Standard
External Thermal Insulation Composite Systems with Rendering
(2001/596/EC)
ETAG 004
Liquid Applied Roof Waterproofing Kits Part 1: General
(2001/596/EC)
ETAG 005
Systems of Mechanically Fastened Flexible Roof Waterproofing
Membranes (98/143/EC)
ETAG 006
Timber Frame Building Kits (99/455/EC) ETAG 007
Prefabricated Stair Kits in General (excluding severe climatic
conditions) (2001/596/EC)
ETAG 008
Non Load-Bearing Permanent Shuttering Kits/Systems based on
Hollow Blocks or Panels of Insulating Materials and sometimes
Concrete (2001/596/EC)
ETAG 009
Self Supporting Translucent Roof Kits (2001/596/EC) ETAG 010
Light Composite Wood-Based Beams and Columns (99/92/EC)
ETAG 011
Log Building Kits (99/455/EC) ETAG 012
Post-Tensioning Kits for Pre-stressing of Structures
(98/456/EC)
ETAG 013
Plastic Anchors for Fixing of External Thermal Insulation
Composite Systems with Rendering (97/463/EC)
ETAG 014
Three-Dimensional Nailing Plates (97/638/EC) ETAG 015
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 5 of 24
Product Standard
Self-Supporting Composite Lightweight Panels Part 1: General
(94/23/EC)
ETAG 016
Self-Supporting Composite Lightweight Panels Part 2: Specific
Aspects Relating to Self-Supporting Composite Lightweight Panels
for use in Roofs (94/23/EC)
ETAG 016
Self-Supporting Composite Lightweight Panels Part 3: Specific
aspects relating to Self-Supporting Composite Lightweight Panels
for use in External Walls and Claddings (94/23/EC)
ETAG 016
Self-Supporting Composite Lightweight Panels Part 4: Specific
Aspects Relating to Self-Supporting Composite Light Panels for use
in Internal Walls and Ceilings (94/23/EC)
ETAG 016
Veture Kits - Prefabricated Units for External Wall Insulation
(2001/308/EC)
ETAG 017
Fire Protective Products Part 1: General (2001/596/EC)
ETAG 018
Fire Protective Products Part 2: Reactive Coatings for Fire
Protection of Steel Elements
ETAG 018
Fire Protective Products Part 3: Renderings and Rendering Kits
for Fire Resisting Applications
ETAG 018
Fire Protective Products Part 4: Fire Protective Board, Slab and
Mat Products and Kits
ETAG 018
Pre-Fabricated Wood-Based Load-Bearing Stressed Skin Panels
(94/23/EC)
ETAG 019
Plastic fixings for masonry/stonework (non-structural)
ETAG 020
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 6 of 24
Product Standard
Cold Storage Premises Kits Part 1: Cold Storage Room Kits
(2005/484/EC)
ETAG 021
Watertight covering kits for wet room floors and/or walls Part
1: Liquid applied coverings with or without wearing surface
ETAG 022
Watertight covering kits for wet room floors and/or walls Part
2: Kits based on flexible sheets
ETAG 022
Watertight covering kits for wet room floors and/or walls Part
3: Kits based on inherently watertight boards
ETAG 022
Inverted roof insulation kits
ETAG 031
Liquid applied roof waterproofing kits
ETAG 033
Thermal Insulation Products for Buildings - Factory Made Mineral
Wool (MW) Products. Specification
BS EN 13162:2012+A1:2015
Thermal Insulation Products for Buildings - Factory Made
Products of Expanded Polystyrene. Specification
BS EN 13163:2012+A2:2016
Thermal Insulation Products for Buildings - Factory Made
Products of Extruded Polystyrene Foam (XPS). Specification
BS EN 13164:2012+A1:2015
Thermal Insulation Products for Buildings - Factory Made Rigid
Polyurethane Foam (PUR) Products. Specification
BS EN 13165:2012+A2:2016
Thermal Insulation Products for Buildings - Factory Made
Products of Phenolic Foam (PF). Specification
BS EN 13166:2012+A2:2016
Thermal Insulation Products for Buildings - Factory Made
Cellular Glass (CG) Products. Specification
BS EN 13167:2012+A1:2015
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 7 of 24
Product Standard
Thermal Insulation Products for Buildings - Factory Made Wood
Wool (WW) Products. Specification
BS EN 13168:2012+A1:2015
Thermal Insulation Products for Buildings - Factory Made
Products of Expanded Perlite (EPB). Specification
BS EN 13169:2012+A1:2015
Thermal Insulation Products for Buildings - Factory Made Wood
Fibre (WF) Products. Specification
BS EN 13171:2012+A1:2015
Wood-Based Panels for use in Construction. Characteristics,
Evaluation of Conformity and Marking
BS EN 13986:2004+A1:2015
Timber Structures. Structural Laminated Veneer Lumber.
Requirements
BS EN 14374:2004
Timber Structures - Connectors - Requirements BS EN
14545:2008
Timber Structures. Dowel-type fasteners. Requirements
BS EN 14592:2008+A1:2012
Admixtures for Concrete, Mortar and Grout. Concrete Admixtures.
Definitions, Requirements, Conformity, Marking and Labelling
BS EN 934-2:2009+A1:2012
Specification for Masonry Units. Autoclaved Aerated Concrete
Masonry Units
BS EN 771-4:2011+A1:2015
Specification for Mortar for Masonry. Masonry mortar BS EN
998-2:2016
Thermal insulation products for buildings - In situ formed
loose-fill mineral wool (MW) Part 1: Specification for the loose
fill products before installation
BS EN 14064-1:2010
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 8 of 24
Product Standard
Windows and doors - Product standard, performance
characteristics - Part 1: Windows and external pedestrian doorsets
without resistance to fire and/or smoke leakage characteristics
BS EN 14351-1:2006+A2:2016
Flexible sheets for waterproofing – Bitumen damp proof sheets
including bitumen basement tanking sheets – Definitions and
characteristics
BS EN 13969:2004
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 9 of 24
Product Standard
The certification systems used for the above are one or more of
the following:
• Type testing or examination
• Product evaluation
• Design appraisal
These can be coupled with assessment and surveillance of
production, the supplier’s quality system and/or installation
sites. Where appropriate a:
• European Technical Approval, or
• Certificate or Statement of Conformity, or
• BBA Agrément Certificate
• Certificate of factory production control Will be issued to
the supplier along with (if relevant) a license to use the
appropriate mark of conformity.
Micro-generation Product Certification Solar Collectors Solar
Photovoltaic Panels Micro and Small Wind Turbines Heat Pumps
Biomass Heat-led Micro - Co Generation Packages Electricity Led
Micro Co-Generation Packages Bespoke Building Integrated
Photovoltaic Products Pitched Roof Installation Kits
DECC Scheme Requirements MCS 004 - Solar Collectors MCS 005 -
Solar Photovoltaic Panels MCS 006 - Micro and small wind turbines
MCS 007 - Heat Pumps MCS 008 - Biomass MCS 014 - Micro CHP MCS 015
– Electricity Led Micro Co-Generation Packages MCS 017-Bespoke
Building Integrated Photovoltaic Products MCS 012-Pitched Roof
Installation Kits MCS 010 (Generic Factory Production Control) MCS
011 (Testing and acceptance criteria)
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 10 of 24
Product Standard
Installation of following measures: Cavity Wall Insulation Loft
Insulation Pitched Roof Insulation Flat Roof Insulation Internal
Wall Insulation External Wall Insulation Hybrid Wall Insulation
Draught Proofing Floor Insulation Energy Efficient Glazing and
Doors Room in Roof Insulation
PAS 2030:2017
Specification for the installation of energy efficiency
measures (EEM) in existing buildings Edition 4 - February 2017
PAS 2031:2017 Certification of energy efficiency measure (EEM)
installation in existing buildings Edition 3 – March 2017
Installation of insulating material to the internal walls of a
building, not including the installation of flexible thermal
linings Installation of insulating material to the external walls
of a building, not including the insulation of demountable-clad
buildings Installation of insulating material to the external and
internal walls of a building (“hybrid insulation”), not including
the insulation of demountable-clad buildings, and not including the
installation of flexible thermal linings
DCLG Conditions of Authorisation October 2015 And The Competent
Person Scheme ‘BBA Solid Wall Insulation Competent Person Scheme’
in accordance with the Building Regulations 2010 (as amended)
END
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 11 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
Annex V- FPC Certification Body (AVCP) System 2+
97/555/EC Cements, building limes and other hydraulic binders :
- Common cements, including: -Portland cement, -Portland composite
cements: Portland-slag cement, Portland-silica fume cement,
Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt
shale cement, Portland-limestone cement, Portland composite cement,
-Blastfurnace cements, -Pozzolanic cements, -Composite cements
(preparation of concrete, mortar, grout and other mixes for
construction and for the manufacture of construction products)
EN 197-1:2000 EN 197-1:2000/ A1:2004 EN 197-1:2000/A3:2007 EN
197-1:2011
The Construction Products Regulation EU) No 305/2011
Annex V- Product Certification Body (AVCP) System 1
97/555/EC Cements, building limes and other hydraulic binders :
- Building limes, including: -Calcium limes, -Dolomitic limes,
-Hydraulic limes (preparation of concrete, mortar, grout and other
mixes for construction and for the manufacture of construction
products).
EN 459-1:2010
The Construction Products Regulation (EU) No 305/2011
Annex V- FPC Certification Body (AVCP) System 2+
97/740/EC Masonry and related products (1/3) : - Masonry units
category I
EN 771-4:2011
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 12 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
Annex V- Testing Laboratory (AVCP) System 3
97/740/EC Masonry and related products (2/3) : - Ties (in walls
and partitions), Tension straps (in walls and partitions), Joist
hangers (in walls and partitions), Brackets (in walls and
partitions).
EN 845-1:2003+A1:2008
The Construction Products Regulation (EU) No 305/2011
Annex V- Testing Laboratory (AVCP) System 3
97/740/EC Masonry and related products (2/3) : - Lintels (in
walls and partitions).
EN 845-2:2003
Annex V- FPC Certification Body (AVCP) System 2+
99/469/EC Products related to concrete, mortar and grout (1/2) :
- Admixtures (for concrete, mortar and grout).
EN 934-2:2009
Annex V- FPC Certification Body (AVCP) System 2+
97/740/EC Masonry and related products (1/3) : -
Factory-made,designed masonry mortars (in walls, columns and
partitions).
EN 998-2:2010
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 13 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- FPC Certification Body (AVCP) System 2+
98/214/EC Structural metallic products and ancillaries (2/4) : -
Structural metallic construction members: finished metallic
products such as trusses, girders, columns, stairs, ground piles,
bearing piles and sheet piling, cut to size sections designed for
certain applications, and rails and sleepers. They can be
unprotected or protected against corrosion by coating, welded or
not. (for uses in work's frames and foundations)
EN 1090-1:2009 EN 1090-1:2009+A1:2011 EN 1090-1:2009/AC:2010
Annex V- FPC 99/469/EC EN 1504-2:2004
Certification Body (AVCP) System 2+
Products related to concrete, mortar and grout (1/2) : -
Concrete protection and repair products
EN 1504-3:2005 EN 1504-4:2004 EN 1504-5:2004 EN 1504-6:2006 EN
1504-7:2006
Annex V- FPC 98/601/EC EN 12271:2006
Certification Body (AVCP) System 2+
Road construction products (1/2) : - Surface treatments (for
surface treatments of roads).
EN 12273:2008
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 14 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- FPC Certification Body (AVCP) System 2+
98/601/EC Road construction products (1/2) : - Bituminous
mixtures (for road construction and surface treatment of
roads).
EN 13108-1:2006 EN 13108-1:2006/AC:2008 EN 13108-2:2006 EN
13108-2:2006/AC:2008 EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN
13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN
13108-5:2006/AC:2008 EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN
13108-7:2006 EN 13108-7:2006/AC:2008
Annex V- Testing 99/91/EC EN 13162:2008
Laboratory (AVCP) System 3
Thermal insulating products (1/2) : - Thermal insulating
products
EN 13163:2008 EN 13164:2008 EN 13165:2008 EN 13166:2008 EN
13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008
EN 14064-1:2010
Annex V- Product Certification Body (AVCP) System 1 and Annex V-
Testing Laboratory (AVCP) System 3
99/91/EC Thermal insulating products (2/2) : - Thermal
insulating products
EN 13162:2008 EN 13163:2008 EN 13164:2008 EN 13165:2008 EN
13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008
EN 13171:2008 EN 14064-1:2010
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 15 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- FPC Certification Body (AVCP) System 2+
99/90/EC Membranes (1/3) : - Roof sheets (in buildings).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
Annex V- Product Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to
reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006
Annex V- FPC Certification Body (AVCP) System 2+
98/601/EC Road construction products (1/2) : - Bitumen (for road
construction and surface treatment of roads).
EN 13808:2005 EN 14023:2010
Annex V- FPC 99/90/EC EN 13967:2004
Certification Body (AVCP) System 2+
Membranes (1/3) : - Damp proofing sheets (in buildings).
EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006
Annex V- Product Certification Body (AVCP) System 1 and Annex V-
FPC Certification Body (AVCP) System 2+
97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and
veneered or coated wood-based panels (for structural elements in
internal or external applications).
EN 13986:2004
Annex V- Product Certification Body (AVCP) System 1
97/462/EC Wood-based panels (2/2) : - Unfaced, overlaid and
veneered or coated wood-based panels (for non structural elements
in internal or external applications).
EN 13986:2004
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 16 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary
products (6/6)
EN 14351-1:2006+A1:2010
Annex V- Testing Laboratory (AVCP) System 3
99/93/EC Doors, windows, shutters, blinds, gates and related
building hardware (1/1) :
EN 14351-1:2006+A1:2010
Annex V- Product Certification Body (AVCP) System 1
97/176/EC Structural timber products (1/3) and (2/3)
EN 14374:2004
Annex V- FPC
Certification Body (AVCP) System 2+
97/638/EC Fasteners for structural timber products (1/1
EN 14545:2008 ETAG 015
Annex V- FPC
Certification Body (AVCP) System 2+
98/601/EC Road construction products (1/2) : - Bridge deck
waterproofing products and kits (for bridge decks).
EN 14695:2010
Annex V- Testing
Laboratory (AVCP) System 3
97/176/EC Structural timber products (3/3) : - Fasteners for
structural timber products
EN 14592:2008
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 17 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- Product Certification Body (AVCP) System 1
99/469/EC Products related to concrete, mortar and grout (1/2) :
- Fibres (for structural uses in concrete, mortar and grout)
EN 14889-1:2006 EN 14889-2:2006
Annex V- FPC Certification Body (AVCP) System 2+
99/94/EC Precast normal/ lightweight/ autoclaved aerated
concrete products (1/1) : - Precast normal/ lightweight/ autoclaved
aerated concrete products (for structural use).
EN 15037-4:2010
Annex V- Product Certification Body (AVCP) System 1+
99/469/EC Products related to concrete, mortar and grout (1/2) :
- Additions (Type II) (for concrete, mortar and grout).
EN 15167-1:2006
Annex V- Product 96/582/EC ETAG 001 - 1
Certification Body (AVCP) System 1
Metal anchors for use in concrete (mechanical fasteners) : -
Metal anchors for use in concrete (heavy-duty type) (for fixing
and/or supporting concrete structural elements or heavy units such
as cladding and suspended ceilings).
ETAG 001 - 2 ETAG 001 - 3 ETAG 001 – 3 Amendment ETAG 001 - 4
ETAG 001 - 5 ETAG 001 - 6 ETAG 001 – 6 Amendment
Annex V- Product
Certification Body (AVCP) System 1
97/177/EC Metal injection anchors for use in masonry (1/1) : -
Metal injection anchors for use in masonry
ETAG 001 - 5
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 18 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- FPC Certification Body (AVCP) System 2+
97/463/EC Plastic anchors for use in concrete and masonry
(1/1)
ETAG 001 - 6 ETAG 001 – 6 Amendment ETAG 014
Annex V- Product Certification Body (AVCP) System 1
96/582/EC Structural sealant glazing kits of types (curtain
walling) : - Structural sealant glazing kits, Types II and IV (for
external walls and roofs).
ETAG 002 - 1 ETAG 002 - 2 ETAG 002 - 3
Annex V- FPC Certification Body (AVCP) System 2+
96/582/EC Structural sealant glazing kits of types (curtain
walling) : - Structural sealant glazing kits, Types I and III (for
external walls and roofs).
ETAG 002 - 1 ETAG 002 - 2 ETAG 002 - 3
Annex V- Product Certification Body (AVCP) System 1
98/213/EC Internal partition kits (1/5)
ETAG 003
Annex V- Product Certification Body (AVCP) System 1 and Annex V-
FPC Certification Body (AVCP) System 2+
97/556/EC External thermal insulation composite systems/kits
with rendering (ETICS)(1/1) : -
ETAG 004 Version 08/2011
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 19 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- Product Certification Body (AVCP) System 1 and Annex V-
FPC Certification Body (AVCP) System 2+
98/279/EC Non load bearing permanent shutterings: kits/systems
based on hollow blocks or panels of insulating materials and,
sometimes, concrete (1/1)
ETAG 004 Version 08/2011 ETAG 009
Annex V- Product
Certification Body (AVCP) System 1
98/599/EC Liquid applied roof waterproofing kits (3/3) : -
Liquid applied roof waterproofing kits (for uses subject to
reaction to fire regulations)
ETAG 005
Annex V- FPC
Certification Body (AVCP) System 2+
98/143/EC Systems of mechanically fastened flexible roof
waterproofing membranes (1/1)
ETAG 006
Annex V- Product
Certification Body (AVCP) System 1
99/455/EC Timber frame and log prefabricated building kits
(1/1)
ETAG 007 ETAG 012
Annex V- FPC
Certification Body (AVCP) System 2+
99/89/EC Prefabricated stair kits (1/2)
ETAG 008
Annex V- Product
Certification Body (AVCP) System 1
99/89/EC Prefabricated stair kits (2/2)
ETAG 008
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 20 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- Product Certification Body (AVCP) System 1
98/600/EC Self-supporting translucent roof kits (except
glass-based kits) (3/3)
ETAG 010
Annex V- Product Certification Body (AVCP) System 1
99/92/EC Light composite wood-based beams and columns (1/1)
ETAG 011
Annex V- Product Certification Body (AVCP) System 1+
98/456/EC Post-tensioning kits for the prestressing of
structures (1/1)
ETAG 013
Annex V- Product Certification Body (AVCP) System 1
2000/447/EC Prefabricated wood-based load-bearing stressed skin
panels and self-supporting composite lightweight panels (3/6)
ETAG 016 - 1 ETAG 016 - 2 ETAG 016 - 3 ETAG 016 - 4
Annex V- Product
Certification Body (AVCP) System 1
99/454/EC Fire stopping, fire sealing and fire protection
products (1/2) and (2/2)
ETAG 018 - 1 ETAG 018 - 4 ETAG 018 - 4 Amendment
Annex V- Product
Certification Body (AVCP) System 1
2000/447/EC Prefabricated wood-based load-bearing stressed skin
panels and self-supporting composite lightweight panels (1/6) and
(3/6)
ETAG 019
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 21 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
Annex V- FPC Certification Body (AVCP) System 1 and Annex V- FPC
Certification Body (AVCP) System 2+& 2+
2003/655/EC Watertight coverings kits for wetroom floors and
walls (1/2
ETAG 022 - 1 ETAG 022 - 2 ETAG 022 - 3
Annex V- FPC Certification Body (AVCP) System 1 & 2+
2003/655/EC Watertight coverings kits for wetroom floors and
walls (2/2)
ETAG 022 - 1 ETAG 022 - 2 ETAG 022 - 3
Annex V- FPC Certification Body (AVCP) System 2+
2003/722/EC Liquid-applied bridge deck waterproofing kits : -
Liquid-applied bridge deck waterproofing kits (in bridge
decks).
ETAG 033
Annex V- Product Certification Body (AVCP) System 1
2003/728/EC Metal frame building kits, concrete frame building
kits, prefabricated building units, cold storage room kits and
rock-fall protection kits : - Prefabricated building units (in
building works).
ETAG 023
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 22 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
As a Technical Assessment Body (TAB) for developing European
Assessment Documents
Annex IV –Product Areas 1. Precast normal / lightweight /
autoclaved aerated concrete products.
2. Doors, windows, shutters, gates and related building
hardware.
3. Membranes, including
liquid applied and kits (for water and/or water vapour
control)
4. Thermal insulation
products. composite insulating kits / systems.
6. Chimneys, flues and
specific products 7. Gypsum products 8. Geotextiles,
geomembranes, and related products.
9. Curtain walling / cladding /
structural sealant glazing. 12. Circulation fixtures: road
equipment 13. Structural timber products
/ elements and ancillaries. 14. Wood based panels and
elements 15. Cement, building limes
and other hydraulic binders.
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 23 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
As a Technical Assessment Body (TAB) for developing European
Assessment Documents (cont’d)
Annex IV –Product Areas (cont’d)
16. Reinforcing and prestressing steel for concrete (and
ancillaries). post tensioning kits 17. Masonry and related
products. masonry units, mortars, and ancillaries.
18. Waste water engineering
products 19. Floorings. 20. Structural metallic
products and ancillaries. 21. Internal & external wall
and ceiling finishes.Internal partition kits
22. Roof coverings, roof
lights, roof windows, and ancillary products. roof kits
23. Road construction
products. 24. Aggregates 25. Construction adhesives 26. Products
related to
concrete, mortar and grout. 27. Space heating appliances 28.
Pipes-tanks and
ancillaries not in contact with water intended for human
consumption
-
0113
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey
Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Assessment Manager: GL Page 24 of 24
Accreditation for the purpose of Notified Body Activity taking
into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Assessment
procedure/Module/Article
Category of products or individual products
Essential requirements:Product specification/
Properties/Standards
The Construction Products Regulation (EU) No 305/2011
(cont’d)
As a Technical Assessment Body (TAB) for developing European
Assessment Documents (cont’d)
Annex IV –Product Areas (cont’d)
29. Construction products in contact with water intended for
human consumption
30. Flat glass, profiled glass and glass block products
32. Sealants for joints 33. Fixings 34.Building kits, units,
and
prefabricated elements.
END
