Schedule of Accreditation United Kingdom Accreditation … · Ready mixed concrete BS EN 206:2013 + A1:2016 BS 8500-1:2015 + A1:2016 BS 8500-2:2015 + A1:2016 . BSI Assurance UK Limited

Assessment Manager: WC1 Page 1 of 77

Schedule of Accreditation issued by

United Kingdom Accreditation Service

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

0003

Accredited to ISO/IEC 17065:2012

to provide product conformity certification

BSI Assurance UK Limited

Issue No: 187 Issue date: 13 April 2018

Kitemark Court

Davy Avenue

Knowlhill

Milton Keynes

MK5 8PP

Sales Enquiry Tel: +44 (0)845 080 9000

Fax: +44 (0)1908 228060

Sales Enquiry Email: [email protected]

BSI Website: www.bsigroup.com

Regulatory Contact: Maria Crane

Tel: +44 (0)1908 814724

Email: [email protected]

Locations where certification activities covered by the above Accreditation Standard are undertaken

Kitemark Court Davy Avenue Knowlhill Milton Keynes MK5 8PP UNITED KINGDOM

Kitemark House Maylands Avenue Hemel Hempstead Hertfordshire HP2 4SQ UNITED KINGDOM

Holywell Park Ashby Road Loughborough Leicestershire LE11 3AQ UNITED KINGDOM

Room 1006-1011,10/F Ciro’s Plaza 388 Nanjing W. RD Shanghai 200003 PR CHINA

Thomas R. Malthusstraat 3c 1066 JR Amsterdam NETHERLANDS

Suite 208 Sultan Business Centre PO Box 49400 Dubai UNITED ARAB EMIRATES

210 Amarande Avenue Regus Business Park Menlyn Maine Waterkloof Ext 2 0181 SOUTH AFRICA

Flexible Scope This Certification Body is additionally accredited to develop and add additional product standards within the highlighted product areas, having demonstrated competence in their design and development process for these areas.

0003

Accredited to

ISO/IEC 17065:2012 to provide product

conformity certification


United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK




DETAIL OF ACCREDITATION

Product Standard

CONSTRUCTION

Timber

Structural timber BS EN 519:1995

Particle board BS EN 312:2003

Fibre building boards BS EN 622-4:1997

Windows – wood BS 644-1:1989

Street Furniture

Gully tops and manhole tops for vehicular and pedestrian areas

BS EN 124:1994

Drainage Channels for vehicular and pedestrian areas BS EN 1433:2002

Road & Road Marking Materials

Road marking materials BS EN 1871:2000

Plastic Pipes and Fittings

Plastic Piping systems for water supply - Unplasticised poly (vinylChloride) (PVC-U) Part 1 - General

BS EN 1452-1:2000

Part 2 – Pipes BS EN 1452-2:2000

BS EN ISO 1452-2:2009

0003

Accredited to








Product Standard

Plastic Pipes and Fittings (cont’d)

Part 3 – Fittings BS EN 1452-3:2000

BS EN ISO 1452-3:2009

Part 5 - Fittings for purpose of the system BS EN 1452-5:2000

Cold water storage and combined feed and expansion cisterns (polyolefin or olefin copolymer) up to 500l capacity used for domestic purposes

BS 4213:2004

Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings part 1. General requirements

BS 7291-1:2006 BS 7291-1:2010

Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings part 2. Specification for polybutylene (pb) pipes and associated fittings.

BS 7291-2:2006 BS 7291-2:2010

Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings part 3. Specification for crosslinked polyethylene (pe-x) pipes and associated fittings

BS 7291-3:2006 BS 7291-3:2010

Buried polyethylene (PE) Pipes for water supply - Specifications First Edition

ISO 4427 Pt 12-15:1996 BS ISO 4427-2:2007

Buried polyethylene (PE) Pipes for the supply of gaseous fuels. Metric series - specifications

ISO 4437:1997 BS ISO 4437-2:2014

Polyethylene water pipes BS EN 12201-2:2003

0003

Accredited to








Product Standard

Plastic Windows and Doors

Plastic windows made from PVC-U extruded hollow profiles

BS 7412:2002

White PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: Materials Type Ae

BS EN 12608:2003 (Previously BS 7413)

Insulation

Thermal Insulating Products - Factory made mineral wool

BS EN 13162:2001 BS EN 13162:2008

Thermal Insulating Products - Factory made products of expanded polystyrene

BS EN 13163:2001

Thermal Insulating Products - Factory made products of extruded polystyrene foam

BS EN 13164:2001

Thermal Insulating Products - Factory made rigid polyurethane foam

BS EN 13165:2001

Thermal Insulating Products - Factory made products of phenolic foam

BS EN 13166:2001

Thermal Insulating Products - Factory made cellular glass

BS EN 13167:2001

Thermal Insulating Products - Factory made wood wool products

BS EN 13168:2001

Thermal Insulating Products - Factory made products of expanded perlite

BS EN 13169:2001

0003

Accredited to








Product Standard

Insulation (cont’d)

Thermal Insulating Products - Factory made products of expanded cork

BS EN 13170:2001

Thermal Insulating Products - Factory made wood fibre BS EN 13171:2008

Glass

Ballitini (glass beads) BS EN 1423:1998 and

BS EN 1424:1998

Insulating Glass Units BS EN 1279-2 & BS EN 1279-3:2002

Clay/Ceramic

Clay pavers BS EN 1344:2002

Clay masonry units BS 3921:1985 and

BS EN 771-1:2003

Roof tiles and fittings - clay BS EN 1304:2005

Slate/Stone

Roofing slates BS 680-1:1994

BS EN 12326-1 and BS EN 12326-2:2004

Cast stone BS 1217:1997

Reconstructed stone masonry units BS 6457:1984

0003

Accredited to








Product Standard

Cementitious

Portland - blast furnace cement BS EN 197-1:2000

Pozzolanic cement BS 6610:1996

Portland cement BS EN 197-1:2000

Portland - PFA cement BS EN 197-1:2000

Sulphate resisting Portland cement BS 4027:1996

Building Lime BS EN 459-1:2001

Pulverised fuel ash BS 3892-1:1997

Rendering and Plastering Mortar BS EN 998-1:2003

Masonry Mortar BS EN 998-2:2003

Screed Materials and Floor Screeds BS EN 13813:2002

Cement RC - 03 Spanish Construction Regulations

Ready Mixed Concrete

Ready mixed concrete BS EN 206:2013 + A1:2016

BS 8500-1:2015 + A1:2016 BS 8500-2:2015 + A1:2016

0003

Accredited to








Product Standard

Pre-cast Concrete

Precast aggregate concrete masonry units BS EN 771-3:2003

Precast autoclaved concrete masonry units BS EN 771-4:2003

Metal Windows and Doors

Windows - aluminium alloy BS 4873:2004

Patio doors - aluminium BS 5286:1978

Security/Fire Doors/Windows/Hardware

Enhanced security performance requirements for doorsets and windows

PAS 24:2016

Emergency Exit Devices BS EN 179:1998

Panic Exit Devices BS EN 1125:1997

Determination of the fire resistance of non-loadbearing elements of construction

BS 476-22:1987

Fire resistance test for door and shutter assemblies and openable windows

BS EN 1634-1:2014

Fire resisting and/or smoke control characteristics of pedestrian doorsets, garage doors and openable windows

BS EN 16034:2014

0003

Accredited to








Product Standard

Wrought Metal

Copper tubes for water, gas and sanitation BS EN 1057:2006

ELECTRONIC COMPONENTS

Electronic Components BS 9000 and IECQ-CECC Scheme

MISCELLANEOUS

Rubber

Condoms - natural latex male BS EN 600:1996

BS EN ISO 4074:2015 BS EN ISO 23409:2011

Hot water bottles BS 1970:2001

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanised rubber.

BS EN 681-1:1996

Additives & Sealants

Adhesives for Tiles BS EN 12004:2001

0003

Accredited to








Product Standard

FIRE SAFETY PRODUCTS & INSTALLATIONS

Fire Extinguishing

Fire Extinguishers BS EN 3-3:1996

BS EN 3-6:1996 BS EN 3-7:2004 + A1:2007 BS EN 1866-1:2007 BS 6165:2002

Fire Blankets BS EN 1869:1997

Fire Brigade Equipment BS 336:1989

Fire-Fighting Hoses – Non-percolating lay-flat hoses for fixed systems

BS 6391:2009 BS EN 14540:2014

Fire-Fighting Hoses – Semi-rigid hoses for fixed systems

BS EN 694:2014

Fixed Fire Fighting Systems - Hose reels with semi-rigid hoses

BS EN 671-1:2012

Fixed Fire Fighting Systems - Hose systems with lay-flat hose

BS EN 671-2:2012

Fixed Fire Fighting Systems - Components for gas extinguishing systems

BS EN 12094-1:2003

Fixed Fire Fighting Systems – Gas extinguishing systems

BS EN 15004-1: 2008 Fire testing to Annex C and verification of the design process to clauses 4, 5, 6, and 7 (Excluding Installation and Maintenance)

0003

Accredited to








Product Standard

Fire Systems Equipment

Provision and Maintenance of Portable Fire Extinguishers

BAFE Scheme: SP101-1 Version 1: April 2017

Design, Installation, Commissioning & Maintenance of Fire Detection and Fire Alarm Systems

BAFE Scheme: SP203-1 Version 6: October 2015

Design, Installation, Commissioning & Maintenance of Fixed Gaseous Fire Suppression Systems

BAFE Scheme: SP203-3 Version 2: February 2013

Design, Installation, Commissioning & Maintenance of Emergency Lighting Systems

BAFE Scheme: SP203-4 Version 1: June 2013

Fire Hydrant Systems Equipment BS 750:2006

BS 5041-1:1987 BS 5041-2:1987 BS 5041-3:1975

Fire Detection and Alarm Systems BS EN 54 all parts

Combustible Gas Detection Apparatus BS EN 50194:2000

Smoke Alarms BS EN 14604:2005

Fire detection and alarm devices for dwellings: Specification for heat alarms.

BS 5446-2:2003

Smoke and heat control systems - Specification for powered smoke and heat exhaust ventilators

BS EN 12101-3:2015

0003

Accredited to








Product Standard

PERSONAL PROTECTIVE EQUIPMENT

Eye Protection

Eye protection for vehicle users BS 4110:1999

Eye protection - welding BS EN 175:1997

Eye protection - personal BS EN 166:2002

Eye protectors for motor cyclists and racing drivers AS 1609:1981

Welding filters BS EN 169:2002

Ultraviolet filters BS EN 170:2002

Infrared Filters BS EN 171:2002

Sun glare filters for industrial use BS EN 172:1995

Mesh face screens BS EN 1731:2006

Face shields and visors for use with firefighters and high performance industrial safety

BS EN 14458:2004

Supplementary requirements for the testing and certification of face shields for electrical works

GS-ET-29

0003

Accredited to








Product Standard

Hearing Protection

Hearing protection - Ear-muffs BS EN 352-1:2002

Hearing protection - Ear-plugs BS EN 352-2:2002

Hearing protection - Ear-muffs attached to an industrial safety helmet

BS EN 352-3:2002

Hand Protection

Gloves - General requirements BS EN 420:2003+A1:2009

Medical Gloves for single use BS EN 455-1:2000

BS EN 455-2:2009+A2:2013 BS EN 455-3:2015

Protective gloves – ionizing radiation and radioactive contamination

BS EN 421:2010

Protective Gloves – chemicals and micro organisms BS EN 374-1:2003

BS EN 374-2:2014 BS EN 374-3:2003 BS EN 374-4:2013 BS EN 16523-1:2015

Protective gloves – Mechanical risks BS EN 388:2003

Protective gloves – Firefighters BS EN 659:2003 +A1:2008

Protective gloves – Live working: Gloves of insulating materials

BS EN 60903:2003

0003

Accredited to








Product Standard

Helmets

Helmets - Equestrian BS EN 1384:1997

BS EN 1384:2012 PAS 015:1995 PAS015:2011

Helmets - General purpose industrial safety BS EN 397:2012+A1:2012

Helmets – High performance industrial helmets BS EN 14052:2012+A1:2012

Helmets – Industrial Bump Caps BS EN 812:2012

Helmets - Pedal Cyclists and Users of Skateboards BS EN 1078:2012

Helmets - Head protectors for cricketers BS 7928:2013

Helmets – Airborne Sports BS EN 966:2012+A1:2012

Helmets – Alpine Skiers and Snowboarders BS EN 1077:2007

Helmets – Canoeing and white water sports BS EN 1385:2012

Helmets – Fire fighting in buildings and other structures

BS EN 443:2008

Helemts – Electrically insulating for use on low voltage installations

BS EN 50365:2002

Helmets - Vehicle users BS 6658:1985

Helmets - Police anti-riot PAS 017:1995

0003

Accredited to








Product Standard

Helmets (cont’d)

Helmets - Mountaineering BS EN 12492:2012

Protective helmets for vehicle users BS 6658:1985

ASNZ 1698:2006 AS 1609-1981 BS 4110:1979 (withdrawn)

Protective Footwear

Protective Footwear - Firefighters BS EN 15090:2012

Protective footwear - Motorcycle riders BS EN 13634:2010

Personal Protective Equipment - Safety footwear BS EN ISO 20345:2011

Personal Protective Equipment - Protective footwear BS EN ISO 20346:2014

Personal Protective Equipment - Occupational footwear

BS EN ISO 20347:2012

Protective Clothing

High visibility clothing BS EN ISO 20471:2013

Protective clothing against liquid and gaseous chemicals, aerosols and solid particles

BS EN 943-1:2015 BS EN 943-1:2002 BS EN 943-2:2002

Protective clothing against radioactive contamination BS EN 1073-1:2016

BS EN 1073-2:2002

0003

Accredited to








Product Standard

Respirators

Respirators - Filtering facepieces BS EN 149:2001+A1:2009

Respirators - Half masks and quarter masks BS EN 140:1999

Respirators - Full face masks BS EN 136:1998

Respirators - Particle filters BS EN 143:2000

Respirators - Gas filter(s) and combined filter(s) BS EN 14387:2004+A1:2008

Respirators - Powered filtering devices incorporating a helmet or a hood.

BS EN 12941:1998+A2:2008

Respirators - Power assisted filtering devices incorporating full face masks, half masks or quarter masks

BS EN 12942:1998+A2:2008

Self Contained Open-Circuit Compressed Air Breathing Apparatus with Escape Hood

BS EN 1146:2005

Self Contained Breathing Apparatus BS EN 137:2006

Continuous Flow Compressed Airline Breathing Apparatus

BS EN 14594:2005

Compressed air line breathing apparatus with demand valve. Apparatus with a full mask.

BS EN 14593-1:2005

Compressed air line breathing apparatus with demand valve. Apparatus with a half mask

BS EN 14593-2:2006

0003

Accredited to








Product Standard

Respirators (cont’d)

Respiratory protective devices for self-rescue. Filtering devices with hood for escape

BS EN 403:2004

Respiratory equipment for use against chemical, biological, radiological and nuclear (CBRN) agents – Positive pressure

BS 8468-1:2006

Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents – Negative pressure

BS 8468-2:2006

Self-contained closed-circuit breathing apparatus for escape

BS EN 13794:2002

Personal Fall Protection Equipment

Descender Devices BS EN 341:2011

Work positioning belts BS EN 358:2000

Retractable type fall arresters BS EN 360:2002

Full Body Harnesses BS EN 361:2002

Connectors BS EN 362:2004

Anchor points BS EN 795:2012

Sit harnesses BS EN 813:2008

Lanyards BS EN 354:2010

0003

Accredited to








Product Standard

Personal Fall Protection Equipment (cont’d)

Energy absorbers BS EN 355:2002

TELECOMMUNICATIONS

Total Metering and Billing Systems (TMBS) Ofcom Metering and Billing Direction 2014

GENERAL HARDWARE

Thermostatic Radiator Valves CENMARK/KEYMARK BS EN 215

AUTOMOTIVE

Automotive Services Specification for vehicle damage repair processes

BS 10125:2014 + A1:2016

0003

Accredited to








Product Standard

TRUST SERVICE PROVISION

Accredited to ETSI EN 319 403 for the certification of Trust Service Providers including compliance with the relevant requirements of the eIDAS Regulation (EU) No. 910/2014 and in accordance with the current UK ICO guidance - Achieving ‘qualified status’ and ceasing to provide qualified trust services under the eIDAS Regulation and for the standards listed below.

Qualified certificate for electronic signature (Article 28 of the eIDAS Regulation, (EU) No. 910/2014 – refers)

ETSI EN 319 401 V2.1.1 (2016-02) ETSI EN 319 411-1 V1.1.1 (2016-02) ETSI EN 319 411-2 V2.1.1 (2016-02)

Qualified certificate for electronic seal (Article 38 of the eIDAS Regulation, (EU) No. 910/2014 – refers)


Qualified certificate for website authentication (Article 45 of the eIDAS Regulation, (EU) No. 910/2014 – refers)


Qualified electronic time stamps (Article 42 of the eIDAS Regulation, (EU) No. 910/2014 – refers)

ETSI EN 319 401 V2.1.1 (2016-02) ETSI EN 319 421 V1.1.1 (2016-03)

MCS PRODUCT CERTIFICATION MCS Scheme Requirements: (DECC)

Solar Collectors MCS 004 Solar Photovoltaic Panels MCS 005 Micro and Small Wind Turbines MCS 006 Heat Pumps MCS 007 Heating Appliances Fired by Biomass MCS 008 Generic Factory Production Control MCS 010 Testing and Acceptance Criteria MCS 011 Pitched Roof Installation Kits. MCS 012 Heat-led micro CHP systems MCS 014 Electricity-led micro CHP systems MCS 015 Bespoke Building Integrated Photovoltaic Products MCS 017

0003

Accredited to








Product Standard

HOUSEHOLD OR SIMILAR GAS APPLIANCES

Cooking Appliances including Independent Hotplates, Barbecues and Ovens

BS EN 30-1-1:2008 BS EN 30-1-4:2002 BS EN 30-2-1:1998 BS EN 30-1-2:1999 BS EN 30-1-3:2002 BS EN 30-2-2:1999 BS EN 498:1998 BS EN 484:1998 AS 4551:2008 AS 4557:2004 ANSI Z21.1:2005

Natural Gas Barbecues for Outdoor Use TP 6.9 (Internal Certification Procedure)

Heat Storage Cookers TP 6.10 (Internal Certification Procedure)

Flueless Heat Storage Cookers TP 6.15 (Internal Certification Procedure)

Gas Ovens for Household Use BS EN 15181:2008

Central Heating Boilers and Circulators BS EN 297:1994

BS EN 483:1999 BS EN 625:1996 BS EN 677:1998 AS 4560:2004

Fuel Cell Heating Appliances BS EN 50465:2008

Combined Fire/Back Boiler or Circulator BS 7977-2:2003

Water Heaters BS EN 26:1998 (inc. A1, A2 and A3)

BS EN 89:2000 BS EN 15033:2006 AS 4552:2005

0003

Accredited to








Product Standard

HOUSEHOLD OR SIMILAR GAS APPLIANCES (cont’d)

Instantaneous Water Heaters > 45 kW TP 6.3 (Internal Certification Procedure)

Instantaneous Condensing Water Heaters TP 6.4 (Internal Certification Procedure)

Instantaneous Condensing Water Heaters for Outdoor Use

TP 6.5 (Internal Certification Procedure)

Gas-Fired Appliances Producing Hot Water - Assessment of Energy Consumption

BS EN 13203-2:2006

Gas Fires and Space Heaters BS EN 509:2000

BS EN 613:2001 BS EN 1266:2002 BS 7977-1:2009 BS EN 13278:2003 AS 4553:2008

Space Heaters (EN 613) appliances with C31 Flues TP 6.13 (Internal Certification Procedure)

Space Heaters (EN 613) appliances for unattended operation


Flueless Heaters BS EN 14829:2007

Flueless LPG Space Heaters BS EN 449:2002

Excluding catalytic heaters

Air Heaters BS EN 778:2009

BS EN 1196:1998 BS EN 1319:2009 BS 5258:Part 9:1989 BS 6332:Part 6:1990

0003

Accredited to








Product Standard

HOUSEHOLD OR SIMILAR GAS APPLIANCES (cont’d)

LPG Absorption Refrigerators BS EN 732:1999

AS 4555:2002

Portable Vapour Pressure LPG Appliances BS EN 521:2006 AS 2658:2008

Portable Gas Cookers using non-refillable gas canisters


Tumble Dryers BS EN 1458-1:2000

Flueless Patio Heaters BS EN 14543:2005

Decorative Open Flame Appliances for Outdoor Use TP 6.24 (Internal Certification Procedure)

Room Sealed LPG Space Heaters for Vehicles and Boats

BS EN 624:2000 excluding appliances for vehicles in motion

COMMERCIAL GAS HEATED CATERING EQUIPMENT

BS EN 203-1:2005 BS EN 203-2-1:2005 BS EN 203-2-2:2006 BS EN 203-2-3:2005 BS EN 203-2-4:2005 BS EN 203-2-6:2005 BS EN 203-2-7:2007 BS EN 203-2-8:2005 BS EN 203-2-9:2005 BS EN 203-2-10:2007 BS EN 203-2-11:2006 AS 4563:2004

Professional Catering Barbecues TP 6.19 (Internal Certification Procedure)

Hog/Pig Roasters TP 6.21 (Internal Certification Procedure)

0003

Accredited to








Product Standard

COMMERCIAL GAS APPLIANCES

Overhead Radiant Heaters BS EN 416-1:2009

BS EN 416-2:2006 BS EN 419-1:2009 BS EN 419-2:2006 BS EN 777-1:2009 BS EN 777-2:2009 BS EN 777-3:2009 BS EN 777-4:2009

Gas Radiant Heaters for Outdoor Use TP 6.22 (Internal Certification Procedure)

LPG Space Heaters BS EN 461:1999

BS EN 1596:1998

Heating Boilers - Forced Draught BS EN 303-1:1999

Boiler Body and Forced Draught Burners BS EN 303-3:1999

Hot Water Boilers BS EN 656:2000

BS 5978:Part 1:1989 BS 5978:Part 2:1989 BS 5978:Part 3:1989 BS EN 13836:2006 BS EN 15417:2006 prEN 15420:Jan 2006

Air Heaters BS 5990:2006

BS 5991:2006 BS EN 525:2009 BS EN 1020:2009 BS EN 12669:2000 BS EN 621:2009

Tumble Dryers BS EN 12752-1:1999

AS 4554:2005

0003

Accredited to








Product Standard COMMERCIAL GAS APPLIANCES (cont’d)

Commercial Dryers > 20 kW TP 6.8 (Internal Certification Procedure)

GAS CARRYING CONTROLS

Manually Operated Ball Valves BS EN 331:1998

Ball Valve Families 2”-4” TP 6.7 (Internal Certification Procedure)

Taper Plug Valves BS 1552:1995

Automatic Shut-Off Valves BS EN 161:2007

AS 4629:2005

Pressure Governors BS EN 88-1:2007

Distribution Valves GIS/V7 Part 3:2008

Multifunction Gas Controls BS EN 126:2004

Flame Supervision Devices BS EN 125:1991

BS 6047:Part 1:1981

Gas Taps BS EN 1106:2001

AS 4617 : 2004

Safety and Control Devices BS EN 13611:2007

Normally Open (Vent) Valves TP 6.16 (Internal Certification Procedure)

LPG Regulators BS EN 12864:2001

0003

Accredited to








Product Standard

GAS CARRYING CONTROLS (cont’d)

Thermostats BS EN 257:1992

Gas/Air Ratio Controls BS EN 12067-1:1999

ANCILLIARIES RELATING TO GAS EQUIPMENT

Flue Pipes and Accessories BS EN 1856-1:2003

Flexible Hoses & Connection Valves BS 669:Part 1:1989

BS 669:Part 2:1997 BS EN 15069:2008 BS EN 14800:2007 BS EN 15266:2007

Diaphragm Gas Meters BS EN 1359:1999

System Chimneys with Plastic Flue Liners BS EN 14471:2005

Flue Blocks and Masonry Terminals BS EN 13502:2002

ELECTRICAL APPARATUS

Household and Similar Electrical Appliances

Those standards marked “#” have been assessed against Articles 13, 18 & 21 of the German Product Safety Act 2011 (ProdSG)

Household and Similar Electrical Appliances BS EN 60335-1:2002# BS EN 60335-1:2012# AS/NZS 60335.1:2002#

Cooking Ranges and Ovens BS EN 60335-2-6:2003#

AS/NZS 60335.2.6:2008#

Washing Machines BS EN 60335-2-7:2010#

0003

Accredited to








Product Standard

ELECTRICAL APPARATUS (cont’d)

Household and Similar Electrical Appliances (cont’d)


Tumble Dryers BS EN 60335-2-11:2010#

1) Excluding Tumble Dryers with water connections

2) Excluding flammable refrigerants & non-sparking ‘n’ class electrical appliances

Appliances for Heating Liquids BS EN 60335-2-15:2002#

Storage Water Heaters BS EN 60335-2-21:2003#

Refrigerating Appliances BS EN 60335-2 24:2010#

AS/NZS 60335.2.24:2002# Absorption Type Refrigerators only

Room Heaters BS EN 60335-2-30:2009# Excluding oil filled radiators

Instantaneous Water Heaters BS EN 60335-2-35:2003#

Commercial Electric Cooking Ranges And Ovens BS EN 60335-2-36:2002#

Commercial Deep Fat Fryers BS EN 60335-2-37:2002#

Commercial Griddles BS EN 60335-2-38:2003#

Commercial Electric Multi-Purpose Cooking Pans BS EN 60335-2-39:2003#

Electric Heat Pumps BS EN 60335-2-40:2003# Excluding flammable refrigerant type

0003

Accredited to








Product Standard

ELECTRICAL APPARATUS (cont’d) Household and Similar Electrical Appliances (cont’d)


Commercial Convection Ovens, Steam Cookers, And Steam-Convection Ovens

BS EN 60335-2-42:2003#

Commercial Steam Cookers BS EN 60335-2-46:1989#

Commercial Grillers And Toasters BS EN 60335-2-48:2003#

Hot Cupboards BS EN 60335-2-49:2003#

Outdoor Electric Barbecues BS EN 60335-2-78:2003#

Fans BS EN 60335-2-80:2003#

Gas, Oil & Fuel Burning Appliances Having Electrical Connections

BS EN 60335-2-102:2006# AS/NZS 60335.2.102:2004#

Electrical Apparatus For CO Detection BS EN 50291-1:2010#

BS EN 50291-2:2010#

Controls and Components

Automatic Electrical Controls For Household And Similar Use

BS EN 60730-1:2001

Automatic Electrical Controls For Electrical Household Appliances

BS EN 60730-2-1:1997

Automatic Electrical Controls: Temperature Sensing Controls

BS EN 60730-2-9:2002

0003

Accredited to








Product Standard


Luminaires Control Gear

Luminaires. General requirements and tests. BS EN 60598-1:2015

Luminaires - Particular requirements. Specification for fixed general purpose luminaires.

BS 4533-102.1:1990 EN 60598-2-1:1989

Luminaires - Particular requirements. Luminaires for road and street lighting.

BS EN 60598-2-3:2003

Luminaires - Particular requirements. Portable general purpose luminaires.

BS EN 60598-2-4:1998

Luminaires - Particular requirements. Floodlights.

BS EN 60598-2-5:1998

Luminaires - Particular requirements. Luminaires with built-in transformers for filament lamps.

BS EN 60598-2-6:1995

Luminaires - Particular requirements. Specification for air-handling luminaires (safety requirements).

BS 4533-102.19:1990 EN 60598-2-19:1989

Luminaires - Particular requirements. Luminaires for emergency lighting.

BS EN 60598-2-22:2014

Central power supply systems. BS EN 50171:2001

Automatic test systems for battery powered emergency escape lighting

BS EN 62034:2012

0003

Accredited to








Product Standard


Luminaires

Electrical supply track systems for luminaires. BS EN 60570:2003

Lamp Control Gear. General & safety requirements. BS EN 61347-1: 2008

Particular Requirements for starting devices (other than glow starters).

EN 61347-2-1: 2001

Particular requirements for dc or ac supplied electronic step-down converters for filament lamps.

EN 61347-2-2: 2012

Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps.

EN 61347-2-3: 2011

Particular requirements for battery supplied electronic control gear for emergency lighting (self-contained).

BS EN 61347-2-7: 2012

Particular requirements for ballasts for fluorescent lamps.

BS EN 61347-2-8: 2001

Particular requirements for electromagnetic control gear for discharge lamps (excluding fluorescent lamps).

BS EN 61347-2-9: 2013

Particular requirements for miscellaneous electronic circuits used with luminaires.

BS EN 61347-2-11: 2002

Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps).

BS EN 61347-2-12: 2005

0003

Accredited to








Product Standard


Luminaires (cont’d)

Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules.

BS EN 61347-2-13: 2006

Ballasts for tubular fluorescent lamps. Performance requirements.

BS EN 60921: 2004

Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements.

BS EN 60923: 2005

Glow-starters for fluorescent lamps BS EN 60155: 1995

SAFETY RELATED ELECTRONIC CONTROLS

Automatic Gas Burner Control Systems BS EN 298:2003 (excluding UV detectors & Type B

Battery Operated equipment) ANSI Z21.20:2007

Electronic Flame Safeguards & Flame Detectors AS 4625:2005

Control Functions In Electronic Systems For Gas Burners And Appliances

BS EN 14459:2007

Automatic Burner Control Systems For Oil Burners BS EN 230:2005

Safety & Control Devices For Gas Burners ISO 23550:2004

Gas/Air Ratio Controls BS EN 12067-2:2004

Fuel/Air Ratio Controls For Gas/Oil Appliances ISO 23552-1:2007

0003

Accredited to








Product Standard

SAFETY RELATED ELECTRONIC CONTROLS (contd)

Kitchen Extract Control Systems TP 6.1 (Internal Certification Procedure)

Gas Proving Control Systems TP 6.2 (Internal Certification Procedure)

ELECTRICAL WIRING ACCESSORIES

Rewireable and Non-Rewireable Plugs BS 1363-1:1995 + A4:2012

AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS

BS EN 676:2003

UNVENTED HOT WATER STORAGE SYSTEMS TP 6.12 (Internal Certification Procedure) (based on

BS 7206:1990 and G3 Building Regulations)

COAL-FIRED APPLIANCES

Charcoal Barbecues BS EN 1860-1:2003

OIL FIRED APPLIANCES BS EN 304:1992

BS EN 15034:2006 BS EN 15035:2006

GAS APPLIANCE SAFETY (NEW ZEALAND) Gas appliances as listed in the following sections of this schedule:

• Household or similar gas appliances

• Commercial gas heated catering equipment

• Commercial gas appliances

• Automatic forced draught burners for gaseous fuels

NZS 5262:2003

0003

Accredited to








Product Standard

GAS APPLIANCE SAFETY (SOUTH AFRICA) Gas appliances as listed in the following sections of this schedule:

• Household or similar gas appliances

• Commercial gas heated catering equipment

• Commercial gas appliances

• Automatic forced draught burners for gaseous fuels

SANS 1539:2008

0003

Accredited to








Product Standard

Service provided by Green Deal Advisors Green Deal Advisor Domestic Green Deal Advisor Non domestic Level 3 Green Deal Advisor Non domestic Level 4

Specification for Certification Bodies certifying the Green Deal Advice Service Version 205/2014 1 April 2014 Specification for organisations providing the Green Deal Advice Service Version 005/2014 1 April 2014

Installation of following measures:

• Condensing Boilers, Natural Gas-fired and Liquefied Petroleum Gas-fired (domestic and non-domestic)

• Condensing Boilers, Oil-fired (domestic and non-domestic)

• Heating and Hot Water System Controls

• Under-floor Heating

• Flue Gas Heat Recovery Devices

• Natural Gas-fired and Liquefied Petroleum Gas-fired Warm-air Heating Systems

• Electric Storage Heaters (domestic and non-domestic)

• Cavity Wall Insulation

• Loft Insulation

• Pitched Roof Insulation

• Flat Roof Insulation

• Internal Wall Insulation

• External Wall Insulation

• Hybrid Wall Insulation

• Draught Proofing

• Floor Insulation

• Heating System Insulation (pipes and cylinders)

• Energy Efficient Glazing and Doors

• Lighting Fittings, Lighting Systems and Lighting Systems Controls

• Solar Blind, Shutters and shading devices (internal and external)

• Chillers

• Hot Water Systems

• Mechanical ventilation with heat recovery

• Radiant Heating

• Water efficient taps and showers

• Variable speed drives for fans and pumps

PAS 2030:2017

Specification for the installation of energy efficiency measures (EEM) in existing buildings Edition 4 - February 2017 PAS 2031:2017

Certification of energy efficiency measure (EEM) installation in existing buildings Edition 3 – March 2017

0003

Accredited to








Product Standard

Installation of fixed low or extra-low voltage electrical

installations in dwellings.

DCLG Conditions of Authorisation 6 June 2012

and

Competent Person Scheme Kitemark for Electrical Installation Work in accordance with the Building Regulations 2010 (as amended)

Installation, as a replacement, of a window, rooflight,

roof window or door in an existing dwelling.

DCLG Conditions of Authorisation 6 June 2012

and

Competent Person Scheme Kitemark for Window and door installation in accordance with the Building Regulations 2010 (as amended)

Security Industry Authority (SIA) Business Licensing: Static site guarding and mobile patrol services. BS 7499:2013 taking into account the SIA Regulator’s

Principles for Business Licensing

Security screening of personnel employed in a security environment

BS 7858:2012 taking into account the SIA Regulator’s Principles for Business Licensing

Cash and valuables in transit. BS 7872:2011 taking into account the SIA Regulator’s

Principles for Business Licensing

Closed circuit television (CCTV) management & operation.

BS 7958:2009 taking into account the SIA Regulator’s Principles for Business Licensing

Door supervision. BS 7960:2005 taking into account the SIA Regulator’s Principles for Business Licensing

Key-holding and response services. BS 7984:2008 taking into account the SIA Regulator’s Principles for Business Licensing

END

0003

Accredited to








Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and the relevant sections of ISO/IEC 17020:2012, ISO/IEC 17021:2011 and ISO/IEC 17025:2005

Directive / Regulation

Conformity Assessment procedure/

Module/article

Category of products or individual products

Essential requirements: Product specification /

Properties/Standards

The Construction Products Regulation (EU) No 305/2011

FPC Certification Body (System 2+)

95/467/EC Chimneys, flues and specific products (1/1) : - Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys).

EN 12446:2003 EN 12446:2011 EN 13063-1:2005+A1:2007 EN 13069:2005 EN 13084-5:2005 EN 13084-5:2005/AC:2006 EN 13084-7:2005 EN 13084-7:2005/AC:2009 EN 14471:2005 EN 1457-1:2012 EN 1457-2:2012 EN 1806:2006 EN 1856-1:2009 EN 1856-2:2009 EN 1857:2010 EN 1858:2008 EN 1858:2008+A1:2011

Product Certification Body (System 1)

95/467/EC Structural bearings (1/1) : - Structural bearings (in buildings and civil engineering works where requirements on individual bearings are critical).

EN 1337-3:2005 EN 1337-4:2004 EN 1337-4:2004/AC:2007 EN 1337-5:2005 EN 1337-6:2004 EN 1337-7:2004 EN 1337-8:2007

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Dry powder systems-kits (fire safety).

EN 12416-1:2001 EN 12416-1:2001/A1:2004 EN 12416-2:2001

0003

Accredited to










Conformity

Assessment

procedure/

Module/article


Essential requirements: Product specification / Properties/Standards

The Construction Products Regulation (EU) No 305/2011 (cont’d)

Product Certification Body (System 1) (cont’d)

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - First aid hose systems-kits (fire safety). EN 671-1:2001

EN 671-1:2001/AC:2002 EN 671-2: 2001 EN 671-2:2001/A1:2004

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke and heat exhaust ventilation systems-kits (fire safety).

EN 12101-2:2003 EN 12101-3:2002 EN 12101-3:2002/AC:2005 EN 12101-3:2015

96/577/EC Fire alarm/detection,

fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety).

EN 12094-9:2003 EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-12:2002 EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety).

EN 12094-12:2003 EN 14604:2005 EN 14604:2005/AC:2008 EN 54-23:2010 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire control components) (fire safety).

EN 12101-10:2005 EN 12101-10:2005/AC:2007

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke curtains (fire safety).

EN 12101-1:2005 EN 12101-1:2005/A1:2006


fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Check valves and non-return valves (fire safety).

EN 12094-13:2001 EN 12094-13:2001/AC:2002


fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Mechanical weighing devices (fire safety).

EN 12094-11:2003

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure gauges and pressure switches (fire safety).

EN 12094-10:2003


fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Non-electrical disable devices (fire safety).

EN 12094-2:2003 EN 12094-6:2006


fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Selector valves and their actuators (fire safety).

EN 12094-4:2004 EN 12094-5:2006

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Multiple controls (fire safety)

EN 12094-3:2003

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire hydrants (fire safety)

EN 14339:2005 EN 14384:2005

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety).

EN 54-11:2001/A1:2005


fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety)

EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety).

EN 54-17:2005 EN 54-17:2005/AC:2007

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Nozzles/sprinklers/outlets (fire safety)

EN 12094-7:2000 EN 12094-7:2000/A1:2005 EN 12259-1:1999 + A1:2001 EN 12259-1:1999+A1:01/A2:04 EN 12259-1:1999+A1:01/A3:06

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Flexible connectors (fire safety).

EN 12094-8:2006

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - High pressure container valve assemblies and their actuators (fire safety).

EN 12094-4:2004 EN 12094-5:2006

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Dry alarm valve assemblies (fire safety).

EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Wet alarm valve assemblies (fire safety).

EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Water flow detectors/switches (fire safety)

EN 12259-5:2002


fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Pressure differential systems-kits (fire safety).

EN 12101-6:2005 EN 12101-6:2005/AC:2006

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety).

EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety).

EN 12094-1:2003 EN 54-16:2008 EN 54-2:1997 EN 54-2:1997/AC:1999

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Sprinklers and water spray systems-kits (fire safety).

EN 12259-4:2000/A1:2001


fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systems-kits (fire safety).

EN 13565-1:2003 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006

96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety).

EN 54-21:2006

96/579/EC Circulation fixtures (1/2) : - Road marking products: retroreflecting road studs (for circulation area).

EN 1463-1:2009

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/579/EC Circulation fixtures (1/2) : - Road lighting columns (for circulation areas).

EN 40-4:2005 EN 40-4:2005/AC:2006 EN 40-5:2002 EN 40-6:2002 EN 40-7:2002

96/579/EC Circulation fixtures (1/2)

: - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: variable message traffic signs (for circulation areas).

EN 12966-1:2005+A1:2009

96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: permanent warning devices and delineators (for circulation areas).

EN 12352:2006 EN 12899-3:2007

96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic lights and fixed danger lamps (for circulation areas).

EN 12368:2006

96/579/EC Circulation fixtures (1/2) : - Road marking products: Drop-on materials (glass beads, anti-skid aggregates and combinations of the two) (for circulation areas).

EN 1423:1997/A1:2003 EN 1423:2012 EN 1463-1:2009

96/579/EC Circulation fixtures (1/2) : - Vehicle restraint barriers: transition barriers (for circulation areas).

EN 1317-5:2007+A1:2008 EN 1317-5:2007+A2:2012

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/579/EC Circulation fixtures (1/2) : - Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic bollards (for circulation areas).

EN 12899-2:2007

Test Laboratory (System 3)

96/579/EC Circulation fixtures (2/2) : - Road traffic noise reducing devices and barriers (for circulation areas).

EN 14388:2005 EN 14388:2005/AC:2008

96/580/EC Curtain wallings (1/1) : - Curtain wall kits (as external walls not subject to reaction to fire requirements), Curtain wall kits (as external walls subject to reaction to fire requirements).

EN 13830:2003


96/580/EC Curtain wallings (1/1) : - Curtain wall kits (as external walls subject to reaction to fire requirements).

EN 13830:2003

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for drainage and/or filtration (in roads, railways, foundations and walls, drainage systems, erosioncontrol, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).

EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005

96/581/EC Geotextiles (1/2) : -

Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as fluid or gas barriers (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).

EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15382:2008

0003

Accredited to










Conformity

Assessment

procedure/

Module/article




FPC Certification Body (System 2+) (cont’d)

96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: for reinforcement (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).

EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15381:2008

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





96/581/EC Geotextiles (1/2) : - Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used: as protective layer (in roads, railways, foundations and walls, drainage systems, erosion control, reservoirs and dams, canals, tunnels and underground structures, liquid waste disposal or containment, for solid waste storage or waste disposal).

EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13254:2000 EN 13254:2000/A1:2005 EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005

97/176/EC Structural timber products (1/3) : - Solid structural timber products; Kits (trusses, floors, walls, roofs, frames) (bridges, railtracks and buildings).

EN 14250:2010

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





97/176/EC Structural timber products (1/3) : - Solid structural timber products: Elements (bridge elements, truss elements, sleepers, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (bridges, railtracks and buildings).

EN 14081-1:2005+A1:2011 EN 14250:2010


97/176/EC Structural timber products (2/3) : - Structural glued laminated products and other glued timber products: Kits (trusses, floors, walls, roofs, frames) (for bridges and buildings).

EN 14080:2005

97/176/EC Structural timber

products (2/3) : - Structural glued laminated products and other glued timber products: Elements (bridge elements, truss elements, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (for bridges and buildings).

EN 14080:2005 EN 14374:2004


97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external applications).

EN 13986:2004 +A1:2015

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external application).

EN 13986:2004 +A1:2015


97/464/EC Waste water engineering products outside buildings (2/3) : - Prefabricated drainage channel (to be used outside buildings, for waste water from buildings and civil engineering works including roads).

EN 1433:2002 EN 1433:2002/A1:2005

Product Certification Body (System 1+)

97/555/EC Cements, building limes and other hydraulic binders : - Masonry cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

EN 413-1:2004 EN 413-1:2011

97/555/EC Cements, building limes and other hydraulic binders :- Common cements, including: -Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

EN 14216:2004 EN 197-1:2000 EN 197-1:2000/ A1:2004 EN 197-1:2000/A3:2007 EN 197-1:2011

0003

Accredited to










Conformity

Assessment

procedure/

Module/article




FPC Certification Body (System 2)

97/555/EC Cements, building limes and other hydraulic binders : - Building limes, including: -Calcium limes -Dolomitic limes, -Hydraulic limes (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

EN 459-1:201

FPC Certification

Body (System 2+)

97/555/EC Cements, building limes and other hydraulic binders : - Rapid hardening hydraulic road binders (preparation of concrete, mortar, grout and other mixes for road bases stabilisation)

EN 13282-1:2013

Product Certification Body (System 1+)

97/555/EC Cements, building limes and other hydraulic binders : - Calcium aluminate cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

EN 14647:2005 EN 14647:2005/AC:2006

97/555/EC Cements, building limes

and other hydraulic binders : - Special cements, including: -low heat cements, -sulfate resisting cement, -white cement, -sea water resisting cement, -low alkali cement (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

EN 14216:2004 EN 15743:2010

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





97/740/EC Masonry and related products (1/3) : - Factory-made, designed masonry mortars (in walls, columns and partitions).

EN 998-2:2010

97/740/EC Masonry and related

products (1/3) : - Masonry units category I (in walls, columns and partitions).

EN 771-1:2003 EN 771-1:2003/A1:2005 EN 771-1:2011 EN 771-2:2003 EN 771-2:2003/A1:2005 EN 771-2:2011 EN 771-3:2003 EN 771-3:2003/A1:2005 EN 771-3:2011 EN 771-4:2003 EN 771-4:2003/A1:2005 EN 771-4:2011 EN 771-5:2003 EN 771-5:2003/A1:2005 EN 771-5:2011 EN 771-6:2005 EN 771-6:2011


97/808/EC Floorings (2/2) : - Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses).

EN 14041:2004 EN 14041:2004/AC:2006

97/808/EC Floorings (2/2) : - Floor

screed materials (for internal uses). EN 13454-1:2004 EN 13813:2002

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





98/214/EC Structural metallic products and ancillaries (1/4) : - Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures).

EN 10025-1:2004 EN 10219-1:2006 EN 15088:2005

98/214/EC Structural metallic

products and ancillaries (3/4) : - Welding materials (for uses in structural metallic works).

EN 13479:2004

98/214/EC Structural metallic products and ancillaries (4/4) : - Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works).

EN 14399-1:2005


98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6) : - Roof access systems, walkways and footholds (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).

EN 12951:2004

0003

Accredited to










Conformity

Assessment

procedure/

Module/article




Test Laboratory (System 3) (cont’d)

98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6) : - Rooflights (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)).

EN 1873:2005

98/437/EC Internal and external

wall and ceiling finishes (1/5) : - Suspended ceilings (kits) (as internal or external finishes used for fire protection of ceilings).

EN 13964:2004 EN 13964:2004/A1:2006


98/437/EC Internal and external wall and ceiling finishes (3/5) : - Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).

EN 13964:2004 EN 13964:2004/A1:2006

98/437/EC Internal and external wall and ceiling finishes (3/5) : - Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).

EN 14716:2004

98/437/EC Internal and external

wall and ceiling finishes (3/5) : - Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).

EN 438-7:2005

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





98/598/EC Aggregates for uses with high safety requirements (2/2) : - Aggregates for bituminous mixtures and surface treatments (for roads and other civil engineering works).

EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN 13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses with high safety requirements (2/2) : - Armourstones (for hydraulic structures and other civil engineering works).


98/598/EC Aggregates for uses

with high safety requirements (2/2) : - Aggregates for unbound and hydraulically bound mixtures (for roads and other civil engineering works).

EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





98/598/EC Aggregates for uses with high safety requirements (2/2) : - Fillers for bituminous mixtures and surface treatments (for roads and other civil engineering works).

EN 12620:2002+A1:2008 EN 13043:2002 EN 13043:2002/AC:2004 EN 13055-1:2002 EN13055-1:2002/AC:2004 EN 13055-2:2004 EN 13139:2002 EN 13139:2002/AC:2004 EN 13242:2002+A1:2007 EN 13383-1:2002 EN 13383-1:2002/AC:2004 EN 13450:2002 EN 13450:2002/AC:2004

98/598/EC Aggregates for uses

with high safety requirements (2/2) : - Aggregates and fillers for concrete, mortar and grout (in buildings, roads and other civil engineering work).


98/598/EC Aggregates for uses with high safety requirements (2/2) : - Railway ballast (for railway works).


0003

Accredited to










Conformity

Assessment

procedure/

Module/article





98/601/EC Road construction products (1/2) : - Bituminous mixtures (for road construction and surface treatment of roads).

EN 13108-1:2006 EN 13108-1:2006/AC:2008 EN 13108-2:2006 EN 13108-2:2006/AC:2008 EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN 13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN 13108-7:2006 EN 13108-7:2006/AC:2008

98/601/EC Road construction products (1/2) : - Bitumen (for road construction and surface treatment of roads).

EN 12591:2009 EN 13808:2005 EN 13924:2006 EN 13924:2006/AC:2006 EN 14023:2010

98/601/EC Road construction products (1/2) : - Surface treatments (for surface treatments of roads).

EN 12271:2006 EN 12273:2008

98/601/EC Road construction products (1/2) : - Bridge deck waterproofing products and kits (for bridge decks).

EN 14695:2010

99/90/EC Membranes (1/3) : - Roof sheets (in buildings).

EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006

99/90/EC Membranes (1/3) : - Damp proofing sheets (in buildings).

EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





99/90/EC Membranes (1/3) : - Water vapour control layers (in buildings).

EN 13859-1:2005+A1:2008 EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2004 EN 13984:2004/A1:2006

99/90/EC Membranes (1/3) : - Roof underlays (in buildings).

EN 13859-1:2005+A1:2008

99/90/EC Membranes (1/3) : -

Damp proof courses (in buildings). EN 14909:2006 EN 14967:2006


99/90/EC Membranes (2/3) : - Water vapour control layers (for uses subject to reaction to fire regulations).


99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).

EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006

99/90/EC Membranes (2/3) : -

Roof underlays (for uses subject to reaction to fire regulations).

EN 13859-1:2005+A1:2008

99/90/EC Membranes (2/3) : - Damp proof courses (for uses subject to reaction to fire regulations).

EN 14909:2006 EN 14967:2006

99/90/EC Membranes (2/3) : - Damp proofing sheets (for uses subject to reaction to fire regulations).

EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





99/90/EC Membranes (2/3) : - Water vapour control layers (for uses subject to reaction to fire regulations).


99/90/EC Membranes (2/3) : - Roof

sheets (for uses subject to reaction to fire regulations).

EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006

99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).

EN 13859-1:2005+A1:2008

99/90/EC Membranes (2/3) : - Damp proof courses (for uses subject to reaction to fire regulations).

EN 14909:2006 EN 14967:2006

99/90/EC Membranes (2/3) : -

Damp proofing sheets (for uses subject to reaction to fire regulations).

EN 13967:2004 EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





99/91/EC Thermal insulating products (2/2) : - Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire).

EN 13162:2008 EN 13163:2008 EN 13164:2008 EN 13165:2008 EN 13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009 EN 14304:2009 EN 14305:2009 EN 14306:2009 EN 14307:2009 EN 14308:2009 EN 14309:2009 EN 14313:2009 EN 14314:2009 EN 14316-1:2004 EN 14317-1:2004

99/93/EC Doors, windows,

shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).

EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003

0003

Accredited to










Conformity

Assessment

procedure/

Module/article




Calculation body Test Laboratory (System 3)

99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)).

EN 13241-1:2003 EN 13241-1:2003+A1:2011 EN 14351-1:2006+A1:2010


99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes).

EN 14351-1:2006+A1:2010

Calculation body Test Laboratory (System 3)

99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (any other).

EN 14351-1:2006+A1:2010


99/94/EC Precast normal/lightweight/autoclaved aerated concrete products (1/1) : - Precast ormal/lightweight/autoclaved aerated concrete products (for structural use).


99/469/EC Products related to concrete, mortar and grout (1/2) : - Fibres (for structural uses in concrete, mortar and grout).

EN 14889-1:2006 EN 14889-2:2006

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





99/469/EC Products related to concrete, mortar and grout (1/2) : - Concrete protection and repair products (for other uses in buildings and civil engineering works).

EN 1504-2:2004 EN 1504-3:2005 EN 1504-4:2004 EN 1504-5:2004 EN 1504-6:2006EN 1504-7:2006

99/469/EC Products related to concrete, mortar and grout (1/2) : - Additions (type I) (for concrete, mortar and grout).

EN 12878:2005 EN 12878:2005/AC:2006

99/469/EC Products related to concrete, mortar and grout (1/2) : - Additions (type I) (for concrete, mortar and grout).

EN 12878:2005 EN 12878:2005/AC:2006

Test Laboratory

(System 3)

99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

EN 1057:2006+A1:2010

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Fittings, adhesives, joints, joint sealings and gaskets (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

EN 682:2002 EN 682:2002/A1:2005


99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building), Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).

EN 1057:2006+A1:2010

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) : - Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/disposal/storage of water not intended for human consumption).

EN 1057:2006+A1:2010

Product

Certification Body (System 1)

2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance).

EN 1279-5:2005+A2:2010

2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance).

EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

2000/245/EC Flat glass, profiled

glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing).

EN 1279-5:2005+A2:2010

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for use as anti-bullet, or anti-explosion glazing).

EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004


2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for other uses liable to present "safety-in-use" risks and subject to such regulations).

EN 1279-5:2005+A2:2010

2000/245/EC Flat glass, profiled

glass and glass-block products (4/6) : - Flat or curved glass panels (for other uses liable to present "safety-in-use" risks and subject to such regulations).

EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004

2000/245/EC Flat glass, profiled glass and glass-block products (5/6) : - Insulating glass units (for uses relating to energy conservation and/or noise reduction).

EN 1279-5:2005+A2:2010

0003

Accredited to










Conformity

Assessment

procedure/

Module/article





2000/245/EC Flat glass, profiled glass and glass-block products (5/6) : - Flat or curved glass panels (specially treated) (for uses 2 relating to energy conservation and/or noise reduction).

EN 14179-2:2005

Product Certification Body (system 1) Test Laboratory (System 3

99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) :- Valves and taps (in installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

EN 331:1998 EN 331:1998/A1:2010


95/467/EC Chimneys, flues and specific products (1/1) : - Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys).

EN 416-1:2009 EN 621:2009 EN 777-1:2009 EN 777-2:2009 EN 777-3:2009 EN 777-4:2009 EN 778:2009 EN 1020:2009 EN 1319:2009

0003

Accredited to










Conformity

Assessment

procedure/

Module/article




Product Certification Body (System 1) Test Laboratory (System 3)

99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (1/5) : - Pipes (in installations for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

EN 14800:2007 EN 15069:2008

FPC Certification

Body (System 2+)

99/94/EC Precast normal/lightweight/autoclaved aerated concrete products (1/1) : - Precast normal/lightweight/autoclaved aerated concrete products (for structural use).

EN 12737:2004+A1:2007 EN 13224:2004+A1:2007 EN 14843:2007 EN 14844:2006+A1:2008 EN 14991:2007 EN 14992:2007 EN 15037-1:2008 EN 15037-2:2009EN 15037-4:2010 EN 15050:2007 EN 15258:2008 EN 15435:2008 EN 15498:2008

Annex V


98/214/EC Structural metallic products and ancillaries (2/4)

EN 1090-1:2009 EN 1090-1:2009/AC:2010 EN 1090-1:2009+A1:2011

0003

Accredited to










Conformity

Assessment

procedure/

Module/article



The Low Voltage Directive 2006/95/EC Implemented in UK Law by:

SI 1994 No. 3260

The Electrical Equipment (Safety) Regulations

Reports to Article 8 and Opinions to Article 9

Audio, Video and Similar Electronic Apparatus; Cables and Cable Fittings; Capacitors, Resistors and Similar Equipment; Electrical and Electronic Controls; Household and Similar Electrical Appliances; Industrial Machinery, Tools and Equipment; IT and Telecommunications Equipment; Measurement, Control and Laboratory Equipment; Power Supply Equipment; Switchgear, Controlgear and Electrical Distribution Equipment

Principal elements of the Safety Objectives requirements Annex I of the Directive and Schedule 3 of the Regulations.

Australian and New Zealand MRA

Conformity Assessment Body

Low Voltage Products Designation as a CAB in accordance with Chapter 1 of the MRA

0003

Accredited to











Module/article



The Personal Protective Equipment 89/686/EEC Implemented in UK Law by: The Personnel Protective Equipment Regulations 2002 (SI 2002/1144)

Article 10 EC Type Examination Article 11A EC Quality Control system for the Final Product Article 11B System for Ensuring EC Quality of Production by Means of Monitoring

Equipment for eye protection

Equipment for leg and/or foot and anti-slip protection

Equipment for head protection

Equipment for hearing protection

Respiratory protective equipment

Equipment designed to prevent drowning or for use as buoyancy aids

Equipment for protection against falls from a height

Equipment for part or whole face protection

Protective clothing

Equipment for hand and arm protection

- Protection against chemical agents

- Protection against mechanical risks

- Protection against cold risks - Protection against electrical

risks - Protection against heat risks

(heat, fire and flame)

Equipment for protection against electrical risks

Equipment designed and manufactured to protect against the result of mechanical action

Rescue equipment

Motorcyclists' equipment

High visibility clothing and accessories

0003

Accredited to











Module/article



(EU) 2016/425 Personnel Protective Equipment Regulation

Module B EU-type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process

Equipment for eye protection Equipment for leg and/or foot and anti-slip protection Equipment for head protection Equipment for hearing protection Respiratory protective equipment Equipment designed to prevent drowning or for use as buoyancy aids Equipment for protection against falls from a height Equipment for part or whole face protection Protective clothing Equipment for hand and arm protection

- Protection against chemical agents

- Protection against mechanical risks

- Protection against cold risks - Protection against electrical

risks - Protection against heat risks

(heat, fire and flame) Equipment for protection against electrical risks Equipment designed and manufactured to protect against the result of mechanical action Rescue equipment Motorcyclists' equipment High visibility clothing and accessories

0003

Accredited to











Module/article



The Pressure Equipment Directive 97/23/EC Implemented in UK Law by: The Pressure Equipment Regulations 1999 No 2001 Pressure Equipment Directive 2014/68/EU

Module A1 Internal

Manufacturing Checks with

Monitoring of the Final

Assessment

Module B EC Type

Examination

All descriptions of pressure equipment and assemblies covered by the Regulations in relation to the conformity assessment modules

Approval of permanent joining procedures and personnel for Pressure Equipment in categories II, III and IV (section 3.1.2 of Schedule 2)

Module B1

EC Design- Examination

Module C1

Conformity to Type

Module D

Production Quality

Assurance

Module D1

Production Quality

Assurance

Module E

Product Quality Assurance

Module E1

Product Quality Assurance

Module F

Product Verification

0003

Accredited to











Module/article



The Pressure Equipment Directive 97/23/EC Implemented in UK Law by: The Pressure Equipment Regulations 1999 No 2001 (cont’d)

Module G EC Unit

Verification

Module H Full Quality Assurance

All descriptions of pressure equipment and assemblies

covered by the Regulations in relation to the conformity

assessment modules (cont’d)

Approval of permanent joining procedures and personnel for Pressure Equipment in categories II, III and IV (section 3.1.2 of Schedule 2) (cont’d)

Pressure Equipment Directive 2014/68/EU

Module H1 Full Quality

Assurance with Design

Examination and Special

Surveillance of the Final

Assessment

0003

Accredited to











Module/article



Radio Equipment and Telecommunications Terminal Equipment Directive 99/5/EC Implemented in UK Law by: The Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 SI 2000 No 730

Annex 5 Full Quality Assurance

Industrial, Scientific and Medical within the scope of the Directive

Essential Requirement Article 3 of the Directive and Schedule 3 of the Regulations

Radio Equipment Directive 2014/53/EU

Annex IV Full Quality Assurance

Mobile (Cellular) Telephone Handsets Short Range Device Telemetry/Telecommand TTE for fixed (wired) network (all types)

Essential Requirement Article 3 of the Directive

0003

Accredited to











Module/article



The Measuring Instruments Directive 2004/22/EC as implemented in the UK by: The Measuring Instruments (Taximeters) Regulations 2006 No.2304

EC Type Examination

Annex B

Declaration of Conformity to

Type Based on the Quality

Assurance of the Production

Process Annex D

All instruments as defined in Annex MI-007 of the directive

Taximeters Annex MI-007

Measuring Instruments Directive 2014/32/EU


Type Based on Product

Verification Annex F

Declaration of

Conformity Based on Full

Quality Assurance plus

Design Examination

Annex H1

0003

Accredited to











Module/article



The Measuring Instruments Directive 2004/22/EC as implemented in the UK by: The Measuring Instruments (Cold-water Meters) Regulations 2006 No. 1268

EC Type Examination

Annex B




Process Annex D


Water meters Annex MI-001





0003

Accredited to











Module/article



The Measuring Instruments Directive 2004/22/EC as implemented in the UK by: The Measuring Instruments (Gas Meters) Regulations 2006 No. 2647

Declaration of Conformity

Based on Full Quality

Assurance plus Design

Examination Annex H1


Gas meters and volume conversion devices Annex MI-002


EC Type Examination

Annex B




Process Annex D

Declaration of

Conformity to Type Based on

Product Verification

Annex F

Declaration of



Design Examination

Annex H1

0003

Accredited to











Module/article



The Measuring Instruments Directive 2004/22/EC as implemented in the UK by: Measuring Instruments (Active Electrical Energy Meters) Regulations 2006 No. 1679

EC Type Examination

Annex B




Process Annex D


Active Electrical Energy Meters Annex MI-003





Declaration of



Design Examination

Annex H1

0003

Accredited to











Module/article



The Non Automatic Weighing Instruments Directive 90/384/EEC Implemented in the UK by:- The Non-Automatic Weighing Instrument Regulations) 2000 No 3236

EC Declaration of Type Conformity

(Guarantee of Production

Quality

All non-automatic weighing instruments

Annex II.2 of the Directive

Non-Automatic Weighing Instruments Directive 2014/31/EU

Gas Appliance Directive (2009/142/EC) Implemented in the UK by:- Gas Appliances (Safety) Regulations 1995 (SI 1995/1629)

Annex II.1 EC Type-

Examination

Annex II.2 EC Declaration of

Conformity to Type

Annex II.3

EC Declaration of Conformity to

Type (Guarantee of

Production Quality

Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating, hot water production, refrigeration, lighting, and washing; forced draught burners, and heating bodies to be equipped with such burners Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies

Examination and approval against the Essential Requirements of Annex 1 Examination and approval of the Quality System in accordance with Annex II of the Directive

Annex II.4

EC Declaration of Type Conformity

(Guarantee of Product Quality

Annex II.5

EC Verification

Annex II.6 EC Unit

Verification

0003

Accredited to










Conformity Assessment procedure/ Module/article


Methods / Procedures Essential requirements: Product specification / Properties/Standards

Gas Appliance Regulation (EU) 2016/426

Annex III.1 Module B: EU Type-

Examination

Annex III.2 Module C2: Conformity to

Type Based on internal production

control

Annex III.3 Module D: Conformity to Type

Based on QA of the production process

Annex III.4 Module E:

Conformity to type based on Product QA

Annex III.5

Conformity to type based on Product

Verification

Annex III.6 Conformity based on unit

Verification

Domestic/Commercial – Appliances burning gaseous fuels used for cooking, heating, hot water production, refrigeration, lighting, and washing; forced draught burners, and heating bodies to be equipped with such burners Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies

Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module.

0003

Accredited to









Marine Equipment Directive 96/98/EC (as amended) implemented by: The Merchant Shipping (Marine Equipment) Regulations 1999* Until 18/09/2016 2014/90/EU implemented by: The Merchant Shipping (Marine Equipment) Regulations 2016 ** From 18/09/2016

Directive 96/98/EC: Article 10 and Annex B * Directive 2014/90/EU: Chpt 4, Article 15 & Annex II ** Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: Product Verification Module G: EC Unit Verification

Life saving appliances A1/1.2c and A1/1.2b * MED 1/1.2c and 1/1.2b **

Standards pursuant to * National legislation implementing Directive 96/98/EC until repealed by Article 40 of Directive 2014/90/EU ** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU

Fire protection equipment A1/3.1, 3.2, 3.7, 3.18c, 3.21, 3.38, 3.41, 3.43, 3.46, 3.51, 3.52, 3.55, 3.56 * MED 1/3.1, 3.2, 3.7, 3.18c, 3.21, 3.38, 3.41, 3.43, 3.46, 3.51, 3.52, 3.55, 3.56 **

Location: Milton Keynes

Note: The inspection of items marked thus * and ** are subject to legislative requirements including the appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation

0003

Accredited to









Locations where Notified Body activities covered by the above Accreditation Standard are undertaken

BSI Kitemark Court Davy Avenue Knowlhill Milton Keynes MK5 8PP UNITED KINGDOM

BSI Holywell Park Ashby Road Loughborough Leicestershire LE11 3AQ UNITED KINGDOM

BSI Kitemark House Maylands Avenue Hemel Hempstead Hertfordshire HP2 4SQ UNITED KINGDOM

END

Schedule of Accreditation United Kingdom Accreditation … · Ready mixed concrete BS EN 206:2013 + A1:2016 BS 8500-1:2015 + A1:2016 BS 8500-2:2015 + A1:2016 . BSI Assurance UK Limited

Text of Schedule of Accreditation United Kingdom Accreditation … · Ready mixed concrete BS EN 206:2013 +...

· 2019-04-08 · BS EN 13414- BS EN 1492- 1 BS EN 1492- 29000+A1:2008 BS EN BS 3551:1962 BS EN 818- BS EN 818- 2: 1996+AIQ008 BS EN 818- NAS Program Manager. Inspection Category

QSRMC QUALITY AND PRODUCT CONFORMITY … Quality and Product Conformity Regulations... · BS 8500-2:2002 and BS EN ISO 9001: 2000) ... Part 7.2 Product Realization - Order Processing

Agrément Certificate 17/5431 S AND B FLOORING SYSTEMS S … · 2020. 2. 10. · with BS EN 15037-1 : 2008, BS EN 1992-1-1 : 2004 and its UK National Annex, BS EN 206 : 2013, BS 8500-1

BS A1 Oct 2011

32Prvsf 013 - NHBC Standards · 2020. 11. 6. · 3.1.6 Concrete specification Also see: BRE Digest 357, BRE Special Digest 1, BS 8500, BS 8500-1 and BS EN 206 Concrete shall be specified

Schedule of Accreditation United Kingdom Accreditation …...BS EN 934-2:2009+A1:2012 Specification for Masonry Units. Autoclaved Aerated Concrete Masonry Units BS EN 771-4:2011+A1:2015

Soils Limited 1 Capstan Square Contamination Assessment Report · 2016. 11. 22. · BS 5930:2015 and BS EN ISO 22476-2 2005+A1:2011 for WS/DP BS EN ISO 14688-1:2002+A1:2013 BS 10175:2011+A1:2013

Tabelle Velocità - Bacci Trasmissioni Meccaniche · Tabelle Velocità Diagramma Giri/Velocità 9000 8500 8000 7000 6535 6000 8500 8500 6800 7049 8500 8500 8500 7304 7536 5000 4000

Gabarito A1 - ELT0501N - BS - Variáveis Complexas.pdf

Ronez Watertight Product Information · 2020. 11. 3. · European standard BS EN 206 and with the requirements of BS8500-1; BS 8500-2 2006 and BS 8102. Ronez Watertight is manufactured

TS Interim Amendment No 23 Implementation of BS 8500-1 ......with BS 8500-1, will be in compliance with BS 8500-2 and BS EN 206. This TS Interim Amendment (TS IA) gives revised guidance

B8 – Spannbettbinder · Betonstahl: BS 4449:2005 A3:2016 Dauerhaftigkeit: BS 8500-1 :2015 . B8 FRILO Software GmbH Seite 7 Nachweise Die Dokumentation zu den Nachweisen und Ausgabebeispielen

Panamatic Midi & Mini Installation instructions...... 1995 BS EN ISO 12100-1:2003+A1:2009 BS EN 61000-6-1: 2001 BS EN ISO 12100-2:2003+A1:2009 BS EN 61000-6-3: 2001 BS EN ISO 13849-2:2008

ANNEX 1 PUBLICATIONS REFERRED TO IN THE NOTES FOR …€¦ · BS 2015 Glossary of paint and related terms ... BS 8004 Code of practice for foundations 1602 1603 ... BS 8500 Concrete

Accreditation...BS EN 13889+A1 RR-C271D BS 3551 BS EN 13414-1+A2 BS EN 13414-2+A2 BS EN 13414-3+A1 BS EN 1677-1+A1 BS EN 1677-2+A1

BS EN13889 2003 - A1 2008 - Manilha

Environmental Product Declaration Ready-Mix Concreteinfo.nsf.org/Certified/Sustain/ProdCert/EPD10259.pdf · European standard EN 206:2013, BS 8500‐1:2015 and BS 8500‐2:2015 based

MODEL PURY-M200-500YNW-A1 (-BS) PURY-EM200-500YNW-A1 (-BS)

· PDF fileBS 7171, I-OLE-R & LEEA code of practice BS EN 280:2013 BS EN 13889:2003+A1 :2008 BS 3551:1962 BS EN 818- BS EN 13414- BS EN 13414- BS EN 13414-

BS EN 14382-2005+A1-2009

· PDF filebs en 13414-2+a2 bs en 13414-3+a1 bs en 13889+a1 rr-c271d bs en 1492-1+a1 bs en 1492-4+a1 bs en 13155 + a2 bs en 1492 + al bs en 13155+a2 issue no: 06

Concrete and its reinforcement · 2020. 4. 27. · Also see: BRE Digest 357, BRE Special Digest 1, BS 8500, BS 8500-1 and BS EN 206-1. 3.1 Concrete an its reinorceent 2018 CHAPTER

Jet 8500 Power Washer - dccf75d8gej24.cloudfront.net 8500 Power... · Original instructions LS0517 -ISS 2 POWER WASHER MODEL NO: JET 8500 PART NO: ... through an approved 13 amp BS

07872-BRO-S-ZZ-DR-X-0008-C01 A1 Vertical · - BS EN 39:2001 – Tube Type 4 - BS EN 74-1:2005 – Scaffolding Fittings - BS EN 131:1993 – Ladders - BS EN 1991-1-4:2005+A1:2010 –

MODSEC™ - CLD Fencing · 2020. 4. 3. · BS EN1990:2002+A1:2005. Suitable for use in XF4 . conditions as designed in BS 8500-1:2013. Suitable for change in ground levels, refer

Gulf Test2019_2021).pdfBS EN 13414- 3+A1 BS EN 1677 -1+A1 BS EN 1677- 2+A1 BS EN 1677- 3+A1 BS EN 1677- BS EN 1677 -5+A1 BS EN 1677- 6+A1 BS EN 1492- 1+A1 BS EN 1492- ElAC-ACC-FM-41,

BS 4142:2014+A1:2019 Technical Note - The ANC · 2020. 5. 19. · 4 BS 4142:2014+A1:2019 • March 2020 Introdution The meaning of ‘appropriately qualified and experienced’ (paragraph

HIGH STRENGTH 52,5N · PDF fileHigh Strength 52,5N Cement with enhanced properties for ready-mixed concrete, ... • BS EN 206-1: Concrete. • BS 8500: ... • BS EN 206-1. • BS

utm.md · Securitatea sistemelor electronice de telecomunicatii Inginerie management în telecomunicätii 1 TELECOMUNICA 11 FET) 8500 8500 8500 8500 8500 8500 5100 5100 5100 5100

Environmental Product Declaration Ready-Mix Concreteinfo.nsf.org/Certified/Sustain/ProdCert/EPD10319.pdf · 2020. 4. 13. · European standard EN 206:2013, BS 8500‐1:2015 and BS

Documents

Schedule of Accreditation United Kingdom Accreditation … · Ready mixed concrete BS EN 206:2013 + A1:2016 BS 8500-1:2015 + A1:2016 BS 8500-2:2015 + A1:2016 . BSI Assurance UK Limited

Text of Schedule of Accreditation United Kingdom Accreditation … · Ready mixed concrete BS EN 206:2013 +...