VAG COM TweakController

Byte (Coding) or

Adaption

Bit / Channel

(Adaption)Bit Type Bit Description

Previous bit / Channel value

New bit / Channel value

Other notes UK Lee

Enable Big Speedo on MFD 17 0 4-7 Drop down menu Country 40:Great Britain

(GB)

10:Rest of World

(RoW)

On the MFD setup screen, scroll down until "alternative speed display", and un-select it. (using the

steering wheel controls). Change the units from Kph to Mph. Now, go onto "MFD display options",

and you'll now see the new option for "speed display". Select it.

9 5 1 Check box "Locking Confirmation via Horn active unchecked checked

9 5 4 Check boxUnlocking Confirmation via Horn

activeunchecked checked

10 0 5 Drop down menu Rear view camera installed unchecked checked

56 3 6 Drop down menuBack-uo camera low (without control

module) installedunchecked checked

Enable lower door puddle light LH

(Retrofit)42 n/a n/a Binary value

Help window in VCDS shows the

optionsexisting value

add 0000064 to

exisitng value Enables "Door Exit/Warning Light installed"

Enable lower door puddle light RH

(Retrofit)52 n/a n/a Binary value

Help window in VCDS shows the

optionsexisting value

add 0000064 to

exisitng value Enables "Door Exit/Warning Light installed"

Enable Folding Mirror Drivers

(Retrofit)42 n/a n/a Binary value

Help window in VCDS shows the

optionsexisting value

add 0004098 to

exisitng value Enables "ambient mirror illumination" and "folding mirrors installed"

Enable Folding Mirror Passenger

(Retrofit)52 n/a n/a Binary value

Help window in VCDS shows the

optionsexisting value

add 0004098 to

exisitng value Enables "ambient mirror illumination" and "folding mirrors installed"

Enable Reverse mirror dip

(Retrofit)9 4 3 Check box Mirror Lowering with Reverse Rear unchecked checked Enables "Mirror lowerg." option in MFD

9 12 2 Check box checked unchecked

9 17 5 Check box unchecked checked

Disable seat belt warning 17 1 1 Check box Seat belt warning active / installed checked unchecked Disables chime and warning light when driving without seatbelt on

9 4 5 Check boxComfort Operation Windows/Sunroof via Rain

Sensor (0=nonrecurring / 1=permanent)unchecked checked check the box to select '1=permanent"

9 4 6 Check boxComfort Operation Windows/Sunroof via Rain

Sensor (Rain Closing) activeunchecked checked

9 ss2 0 2 Check box rain closing active unchecked checked

Headlight washer - delay

between use9 Adaption 26 Drop down menu headlight washer delay 4 8

change the number of times the headlamp washer operates , between

windscreen washer activations

1 5 5-6 Drop down menu20-Cruise Control System (CCS)

installeddefault value

20-Cruise Control System

(CCS) installed

16 2 4-7 Drop down menu10-Cruise Control controlled via Turn

Signal Leverdefault value

10-Cruise Control

controlled via Turn Signal

Lever

Enable Needle sweep upon start up

Wk45 09>17 Adaption staging Drop down menu staging not active active

White MFD only . A bit hit & miss depending on what version controller you have

.

Enable Needle sweep upon start up 2013 17 Adaptionindicator

celebrationDrop down menu indicator_celebration not active active

Some time in 2012 / 2013 the 'staging' option no longer works , use indicator

celebration instead

3 17 3 Check box disabled enabled Enables XDS

3 Adaption 36 Drop down menu 0 2 adjusts the sensitvity of XDS 0=rarely Intervenes 1=weak 2=strong 3=not working

Comfort indicator flashes 9 Adaption 31 drop down menu Select number of Blinks Default (3) choice of 2,3,4 or

5 blinksChange the number of comfort indicator flashes when flicking the stalk

Enable Alarm bleep

confirmation Gives new option in the MFD - "ATA confirmation"

Enable reverse camera image

on RNS/RCD 510 (retrofit) For use when installing RVC into rear bumper - Need to reset Headunit after

coding (press and hold < + > + *)

These values refer specifically to my own UK specification 14MY Scirocco using Genuine VCDS Ver 12 . Any changes you make to your own vehicle are at your own risk

Enable XDS (advanced electronic differential lock)

Enable auto coming home lights Enables automatic coming home lights ( without having to flash the stalk)

Enable window close from rain

sensor to activate the function and enable the "Rain closing" option in the convenience menu of the MFD

Enable cruise control

(Retrofit)For use following the install of cruise control stalks and a compatible slip ring

controller