Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
ปูนฉาบบางผสมสำเร็จรูป เนื�อละเอียดไม่มีเม็ดทราย
สำหรับฉาบแต่งผนังหรือฝ้า ภายนอก สีขาว
LANKO��� LANKO SKIMCOAT EXTERIOR-WHITE
Application MethodPage 1/2Nov 2008
110LANKOSKIM
Application range110 LANKOSKIM is a skim smoothing rendering powder with water for repairing surfaces defect in concrete or render. A smooth surface is obtained by eliminating blemishes such as grooves, seams, rock pockets or surface cracks.
Exterior Interior
Seam, Form trace or step edge Air bubble or porous surface
Rock pocket Surface crack
Bridge various covering: Paint, Wall paperon 110 LANKOSKIM
Siam Paragon ABAC Bangna University
Substrate preparationSubstrate must be firm and sound (Fig. a).
If the leaking is found, repair leaking area by224 K11 Rapid Plug or suitable materials (Fig. b).
Fig. a Fig. b
Over plus, seam or form trace must be struck off orground (Fig. c).
Wires, nails and forms must be taken out or cut off flushwith the surface (Fig. d).
Fig. c Fig. d
Thoroughly clean the substrate, all of contaminants mustbe removed including dirt, grease, paint, old underlay or any loose particles which may inhibit the bonding of 110 LANKOSKIM to the substrate (fig. e).
Pre wet and saturate until damp the substrate with cleanwater prior to applying 110 LANKOSKIM (Fig. f).
Fig. e Fig. f
Page 2/2Nov 2008
The information provided in this document results from our knowledge of the products and our experiences. On-site result may vary, in particular according to the product application methods adopted. Where application methods not covered by this document and used, customers must request specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way constitutes a warranty relative to the use of the products.
ParexGroup Company Limited8-9th Floor Regent House Building 183 Rajdamri Road, Lumpini, Pathumwan, Bangkok 10330
Thailand Tel : 66 (0) 2651 9838 (Auto 8 Lines) - Fax : 66 (0) 2 651 8003Website : www.ParexGroup.co.th
110LANKOSKIM
Product preparationMachine-mix or hand-mix one 20 kg bag of110 LANKOSKIM with 7-7.5 L (34-36%) of clean water until the compound is evenly distributed. DO not mixesadd any admixtures (Fig. g).
110 LANKOSKIM Water (20 kg) (7-7.5 L)
Mix until obtaining a homogeneous paste (Fig. g).
Fig. g
ApplicationThe uneven level, step edge and form trace may betreated by 110 LANKOSKIM as a patch repair by putty knife (Fig. h).
Or apply 110 LANKOSKIM as a thin render paste bysteel trowel and press hard to fill the defects (Fig. i).
Fig. h Fig. i
In case that more than 1 layer are required to obtain thefinished surface, apply 110 LANKOSKIM
After the previous layer has been dry (2-4 hours) andthe total thickness should be 0.3-4 mm. (Fig. j).
The trace of steel trowel can be deleted by using finesand paper after the surface has hardened enough (>1days) (Fig. l).
Fig. j Fig. I
CuringPrevent the plasteredsurface from drying out too rapidly by avoiding direct rays of sun and it must be protected from rain for 2 days. It may be covered after the surface have been completely dry (7 days) or left bare (Fig. j).
Coverage1.3 kg/m
2/mm.
RemarksClean tools with water before the product dry.
Do not apply to gypsum-based substrates.
Do not immerse the product.
In hot condition, protect the finished surface from dryingout by lightly misting.
Do not cover with a hydraulic binder-based mortar.
For characteristics, please see the catalogue.
For safety matter, please see the material safety datasheet.
For further information of 224 K11 Rapid Plug, which ismentioned in this method, please see the catalogue or application method of 224 K11 Rapid Plug.
+
Fig. j
+
ISSUE DATE : JUNE 2016
MATERIAL SAFETY DATA SHEET
IDENTIFICATION PRODUCT NAME:
LANKO 110 LANKOSKIM
OTHER NAMES: LANKOSKIM
USE: Fine grey/white powder A skim smoothing rendering powder to be mixed with water for repairing surface defects in concrete or render. A smooth surface is obtained by eliminating blemishes such as grooves, seams, fine cracks and rock pokers.
PHYSICAL PROPERTIES
APPEARANCE :
FLASH POINT :
Fine grey/White powder
Not flammable
INGREDIENTS
MATERIALS PROPORTION PORTLAND CEMENT 30-50%
CALCIUM CARBONATE 50-70%
HEALTH HAZARD INFORMATION
HEALTH EFFECTS-ACUTE
ACUTE : Cement and Calcium Carbonate are “Nuisance dusts”. An eye, skin and mucous membrane
HEALTH EFFECTS-CHRONIC
CHRONIC EFECTS : Prolonged exposure to respiration crystalline quartz may cause delayed lung injury.
FIRST AID
SWALLOWED : Remove to the fresh air.
EYE : Flush eyes with water for at least 15 minutes holding eyelids open. If irritation .if irritation persists see physician
INGESION: Will irritate throat. Give individual water and see physician
SKIN: Wash hands with soap and water. Apply food quality hand lotion. If irritation persists see physician
PRECAUTION FOR USE PERSONAL PROTECTION
PERSONAL PROTECTION Precaution should be taken to avoid skin or eye contact or swallowing the Product .When handling
Or Mixing the dry product avoids inhaling dust. Wear Safety glasses chemically resistant apron
And Impermeable glove; e.g. PVC. Wear a dust mask when handling the dry product. Always wash before eating, drinking or visiting the toilet
FLAMMABILITY This product is non flammable.
I
CONTACT POINT
Technical Services Telephone: 66(0)2651-9838
Fax: 66(0)2650-2847
The information in this document is given to provide details of known hazards and is prepared from sources believed reliable, and can only be
used for safety and health purposes. The Company makes no warranty that it is in all cases correct and sufficient. Prepared along Work safe
Guidelines. This Material Safety Data Sheet can only be copied in its entirety without any alterations.
SAFE HANDLING INFORMATION
STORAGE AND TRANSPORT
STORAGE & TRANSPORT: store in dry place. Complete seal any part containers. DO NOT ALLOW this product to get wet as
it will harden
SPILLS AND DISPOSAL Avoid breathing dust. Use dry cleanup methods that do not send dust into the air
ISSUE DATE : JUNE 2012
PROJECT REFERENCE YEAR 2011
PRODUCT : 110 LANKOSKIM CONTRACTOR PROJECT
BOUYGUES-THAI THE REIVER/ Charoenakorn
SUKHOTHAI 99 AVENUE/ MuengThong
NORTH POINT/ Pattaya
THE MET/ Sathorn
BUILDING 33 NIDA/ Serithai Rd.
CH.KARNCHANG-TOKYU MITSUBISHI/ Bangpakong
MITSUBISHI/ Leamchabung
DUSTMILK/ Sai 7
CMWT/ Wellglow
CH.KARNCHANG PCL WASLE TREATMENT PLANT/ Bangsue
ESTABLISHMENT/ Rama 9
CHANAKARN PATTANA IRPC NEW FACTORY/ Ayuthaya
CHINA STATE CONSTRUCTION PANO/ Rama 3
CHRISTIANI & NIELSEN (THAI) MAKRO NEW STORE/ Ayuthaya/ Ratburi/ TaladThai
TOA WAREHOUSE/ Bangna KM. 23
KIDNEY INSTITUTION/ Phayathai
MAHIDOL UNIVERSITY/ Salaya
C.E.S. HATARI STORE/ Rama 2
MODE HOTEL/ Sathorn Nue
CONSTRUCTION LINES THE KEY/ Prachachuen
THE ADDRESS/ Asoke
WINDMILL/ Bangna KM 10
THE RYHTHM/ Ratchada 2
CENTRAL/ Ladprao
CENTRAL WORLD/ Rachprasong
CITY HOME/ Srinakarin
CONSTRUCTION LINES SUPARAI PARK/ Tiwanon
GEMINAI 7 ASSOCIATE SIRINTHORN BUILDING/ Thamasat Rungsit
GLORY CONSTRUCTION METRO PARK/ Sathon-Taksin
CONTRACTOR PROJECT
GOLD PLAN DEVELOPMENT THE WALK/ Kaset-Navamin
OGAWA/ Amata Bangpakong
ITALIAN-THAI DEVELOPMENT IKEA MEGA BANGNA
BELLE AVENUE/Rama 9
LOCK BUILD GROUP IDEO BLUECOVE/ Sukhumvit 103
MAHAPORN SK ASIA/ Amata Chonburi
KOHBYO/ Amata Chonburi
POLYPLEX/ Rayong
PORN PRANAKORN SANAMBINNAM MARKET
PORTAL FRAM (THAILAND) KASETSART UNIVERSITY/ Bangkhan
POWER LINE ENGINEERING NOBLE REVIEW/ Ekamai
SOFITEL HOTEL/ Sathon
RENAISSANCE/ Sukhumvit 57
SMART CONDO/ Watcharapon
PAR JOINT VENTURE MRT BLUE LINE
PRE-BUILT PCL VILLA/ Asoke
OISHI FACTORY/ Navanakorn
ORIENTAL BEACH/ Rayong
THE TRUST RESIDENCE/ Pinklao
MAITON/ Rojjana 3
PRECISION/ Rojjana
MARRIOT PUPHATARA/ Rayong
ART MUSEUM/ Vipavadee Rd.
RITTA LOTUS/ Prachenburi
CENTRAL/ Rama 9
HOMEPRO/ Ayuthaya-Wangnoi
MEGA/ Bangna
LOTUS/ Bangphra
LOTUS/ Korat
LOTUS/ Trad
CONTRACTOR PROJECT
RITTA DOHOME/ Khonkaen
GATEWAY/ Ekamai
KINGPOWER/ Pattaya
TTC SIAM DRINK/ Pathumtanee
THE ISLAND WALK/ Ramintra
SATHORN SQUARE
WYNE/ Sukhumvit 71
RUNGFAH SERM CORPORATION BETAGRO/ Lopburi
CONWOOD/ Saraburi
SANGFAH CONSTRUCTION THE COAST/ Bangna
THONGLOR 11
ISSARA / Ladprow
M GALLERY/ Lumpini
THRUE/ Thonglor
PARKLAND/ Petchaburi
WISH @ SAMYAN
FUSE/ Sathon
FOUR POINT/ Sukhumvit
VOQUE/ Sukhumvit
SANGFAH CONSTRUCTION BOULEVARD/ Sukhumvit 39
SEAFCO PCL SRINAKARIN TUNNEL
SEUM INTERGROUP THAMMASART RUNGSIT
EMC PCL TESCO LOTUS/ Bangbuathong
TESCO LOTUS/Pracha-U Thid
BMW Rama 3
THE CLICK/ Ratchada 17
SYNTEC CONSTRUCTION PCL THE ADDRESS/ Sathon
AVORA31/ Sukhumvit 31
S59/ Sukhumvit 59
THE PARKLAND/ Taksin
CONTRACTOR PROJECT
SINO THAI ENGINEERING MRT PURPLE LINE
TEKA CONSTRUCTION WORLD MEDICAL/ Changwattana
THAI KAJIMA SRT/ Amata City Rayong
FTM/ Rayong
KOHBUNSHI/ Bangplee Industrial
THAI NAKANO CHIBA/ Amata City
HAG USUI/ Amata City
TENRYO/ Amata City
EFM/ Amata Bangpakong
KAWABE/ Amata Bangpakong
NHK/ Hemmarat
THAI SUMMIT/ Hemmarat
SAHAPAT SAHA SIREN/ Kabin 304 Industry
CHIN PACK/Pinthong 1 Industry
VUTEQ/ Eastern Sea Board Rayong
THAI NAKANO EPI/ Eastern Sea Board Rayong
PAKKER/Hemmarat Industry
AUTTRANE Ph.2/ Eastern Sea Board Rayong
O SA KA FACTORY/ Samutsakorn
THAI NISHIMATSU CONSTRUCTION BRIDGE STONE/ Bangpakong
SASC/ Hammarat Industry
THAI OBAYASHI TOYATO / Chachuengsao
BRIDGE STONE / Nongkae Industry
PARK VENTURE/ Pleanchit Rd.
TFS/ Rayong
THAI POLYCONS PCL Ramkhamheng University / Bangkapi
THAI TAKENAKA INTERNATIONAL MEC/ Lamchabang
SUNGKO/ Hemmarat Industry
STT/ Hemmarat Industry
MITZUBISHI/ Lamchabung
MEC / Leamchabung
CONTRACTOR PROJECT
WP SUPPLY DENSO/ Wellgrow
AJINOMOTO/ Kumpanfpatch
EGAT DIMOND/ Navanakorn
AJINOMOTO/ Nongkae Industry
STATE CONSTRUCTION TAP / Amata City Rayong
NONGKHO / Sriracha
TES / Rayong
TRA TAISUMMIT / Hemmarat
CONTRACTOR PROJECT
NL DEVELOPMENT PCL CHULA HOSPITAL/ Pathumwan
CHULA UNIVERSITY / Pathumwan
THOSSAPORN ENGINEERING SEAGATE BUILDING / Korat
WESTCON SUPALAI PARK/ Asok
IDEO VERF/ On nut
IDEO / Sukhumvit 103
IDEO / Sukhumvit 38
ARMY HOSPITAL / Viphavadee
AREEYA PROPERTY PCL A SPACE / Sukhumvit 77
ONE UP A SPACE / Asoke
THE COLOR PREMIUM / Bangna
THE COLOR / On nuch
THE COLOR / Tiwanon