Upload
treetree
View
226
Download
0
Embed Size (px)
Citation preview
8/8/2019 SD-Information on the Pressure Equipment Directive
1/12
SD056D/06/en/01.05
50101403
Information on the Pressure Equipment Directive
Proline Promass 80/83/84The following information relates to devices which have been examined in accordance with theguidelines of the Pressure Equipment Directive 97/23/EC.Type code
The code on the nameplate of the measuring device indicates whether the device in question has
been examined in accordance with the Pressure Equipment Directive::
Classification
The classification of the measuring device as per Art. 3 Par. 3, Cat. I/II or III is in accordance
with the PED 97/23/EC, Annex II, Tables 6 to 9..
Taking the flange-independent maximum pressure of the Promass into account, the following isthe maximum classification:
Group 1 fluids:
explosive, flammable, toxic or oxidising media
Group 2 fluids:
non-explosive, non-flammable, non-toxic and non-oxidising media
Type code Definition
Promass 80F**-P/R/S/T/2/4***********
P/R/S/T/U/W/2/4 =
Approved in accordance with Pressure
Equipment Directive, Category III
Promass 83F**-P/R/S/T/2/4***********
Promass 80M/E/I**-P/R***********
Promass 83M/E/I**-P/R***********
Promass 80H**-U/W***********
Promass 83H**-U/W***********
Promass 84F/M/I**-P/R***********
Device Application
Type Nominal
diameter
Stable gases and fluids Unstable gases
Piping for gases, steamsand liquids with a vapour
pressure > 0.5 bar
Piping for liquidswith a vapour
pressure < 0.5 bar
Group 1fluids
Group 2fluids
Group 1fluids
Group 2fluids
Promass F DN 40...100 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III
Promass F DN 150...200 Cat. III Cat. II Cat. II Art. 3 Par. 3 Cat. III
Promass F DN 250...300 Cat. III Cat. II Cat. II Cat. I Cat. III
Promass F (HT) DN 50/80 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III
Promass M DN 40...80 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III
Promass E DN 40...50 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III
Promass I/H DN 40...50 Cat. II Cat. I Cat. II Art. 3 Par. 3 Cat. III
8/8/2019 SD-Information on the Pressure Equipment Directive
2/12
Information on the Pressure Equipment Directive Proline Promass 80/83/84
2 Endress+Hauser
Approval number
The following approval number for the type examination in accordance with Stoomwezen B.V.
applies to all the Promass measuring systems listed: PED/B/8035592
Material load diagrams of process connections
Promass F Page 2
Promass M Page 4 Promass E Page 5
Promass H Page 7
Promass I Page 8
Material load diagrams of process connections Promass F
Promass F:
Flange connection to
EN 1092-1 (DIN 2501)
Flange material:
1.4404/316L Alloy C-22
F06-8xFxxxxx-05-xx-xx-xx-001
The values for the temperature range from +200 C to +350 C are exclusively valid for
Promass F (HT) high-temperature version.
0
10
20
30
40
50
70
60
80
90
100
[bar]
-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]
PN40
PN16
PN100
PN63
220 240 260 280 300 320 340
Promass F:
Flange connection to
ANSI B16.5
Flange material:
1.4404/316L
Alloy C-22
F06-8xFxxxxx-05-xx-xx-xx-002
The values for the temperature range from +200 C to +350 C are exclusively valid for
Promass F (HT) high-temperature version.
0 0
10 145
20 290
30 435
40 580
50 725
70 1015
60 870
80 1160
90 1305
1.4404/316L,Class 300
1.4404/316L,Class 150
[bar] [psi]
-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]
1.4404/316L,Class 600
110 1595
AlloyC-22,Class 600
AlloyC-22,Class 300
AlloyC-22,Class 150
220 240 260 280 300 320 340
8/8/2019 SD-Information on the Pressure Equipment Directive
3/12
Proline Promass 80/83/84 Information on the Pressure Equipment Directive
Endress+Hauser 3
Promass F:
Flange connection to
JIS B2238
Flange material:
1.4404/316L
Alloy C-22
F06-8xFxxxxx-05-xx-xx-xx-003
The values for the temperature range from +200 C to +350 C are exclusively valid for
Promass F (HT) high-temperature version.
0
10
20
30
40
50
70
60
[bar]
-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]
63K
10K
40K
20K
220 240 260 280 300 320 340
Promass F:
Tri-ClampProcess connection
The maximum process pressure for the Tri-Clamp connection is 16 bar. However, the load limit is
defined additionally by the material properties of the outer clamp used. This clamp is not includedin the scope of delivery.
# Warning!Before opening the outer clamp make sure to relieve the pressure from the pipeline!
Promass F:
Threaded union to
DIN 11864-1
Connection material:
1.4404/316L
F06-8xFxxxxx-05-xx-xx-xx-006
Promass F:
Flange connection to
DIN 11864-2
Flange material:
1.4404/316L
F06-8xFxxxxx-05-xx-xx-xx-007
Promass F:
Threaded union to ISO 2853
Connection material:
1.4404/316L
F06-8xFxxxxx-05-xx-xx-xx-008
8/8/2019 SD-Information on the Pressure Equipment Directive
4/12
Information on the Pressure Equipment Directive Proline Promass 80/83/84
4 Endress+Hauser
Material load diagrams of process connections Promass M
Promass M:
Flange connection to
EN 1092-1 (DIN 2501)
Flange material:
1.4404/316L
Titan Grade 2
F06-8xxxxxxx-05-xx-xx-xx-000
0
10
20
30
40
50
PN40
PN16
70
60
80
90
100PN100
[bar]
-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]
PN63
Promass M:
Flange connection to
ANSI B16.5
Flange material:
1.4404/316L
Titan Grade 2
F06-8xxxxxxx-05-xx-xx-xx-001
8/8/2019 SD-Information on the Pressure Equipment Directive
5/12
Proline Promass 80/83/84 Information on the Pressure Equipment Directive
Endress+Hauser 5
Material load diagrams of process connections Promass E
Promass E:
Flange connection to
EN 1092-1 (DIN 2501)
Flange material:
1.4404/316L
F06-4xExxxxx-05-xx-xx-xx-000
20
30
40
50
PN40
70
60
80
90
100PN100
[bar]
-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]
PN63
Promass E:Flange connection to
ANSI B16.5
Flange material:
1.4404/316L
F06-4xExxxxx-05-xx-xx-xx-001
Promass E:
Tri-Clamp
Process connection
The maximum process pressure for the Tri-Clamp connection is 16 bar. However, the load limit is
defined additionally by the material properties of the outer clamp used. This clamp is not included
in the scope of delivery.
# Warning!Before opening the outer clamp make sure to relieve the pressure from the pipeline!
Promass E:
Flange connection to
JIS B2238
Flange material:
1.4404/316L
F06-4xExxxxx-05-xx-xx-xx-002
8/8/2019 SD-Information on the Pressure Equipment Directive
6/12
Information on the Pressure Equipment Directive Proline Promass 80/83/84
6 Endress+Hauser
Promass E:
Threaded union to
DIN 11864-1
Connection material:
1.4404/316L
F06-4xExxxxx-05-xx-xx-xx-005
Promass E:
Flange connection to
DIN 11864-2
Flange material:
1.4404/316L
F06-4xExxxxx-05-xx-xx-xx-006
Promass E:
Threaded union to ISO 2853
Connection material:
1.4404/316L
F06-4xExxxxx-05-xx-xx-xx-007
8/8/2019 SD-Information on the Pressure Equipment Directive
7/12
Proline Promass 80/83/84 Information on the Pressure Equipment Directive
Endress+Hauser 7
Material load diagrams of process connections Promass H
Promass H:
Flange connection to
EN 1092-1 (DIN 2501)
Flange material:
1.4301/304
Wetted parts:
Zirkonium 702
F06-8xHxxxxx-05-xx-xx-xx-010
Promass H:
Flange connection to
ANSI B16.5
Flange material:
1.4301/304
Wetted parts:
Zirkonium 702
F06-8xHxxxxx-05-xx-xx-xx-011
Promass H:
Flange connection to
JIS B2238
Flange material:
1.4301/304
Wetted parts:
Zirkonium 702F06-8xHxxxxx-05-xx-xx-xx-012
8/8/2019 SD-Information on the Pressure Equipment Directive
8/12
Information on the Pressure Equipment Directive Proline Promass 80/83/84
8 Endress+Hauser
Material load diagrams of process connections Promass I
Promass I:
Flange connection to
EN 1092-1 (DIN 2501)
Flange material:
1.4301/304
Wetted parts:
Titan Grade 9
F06-8xxxxxxx-05-xx-xx-xx-000
0
10
20
30
40
50
PN40
PN16
70
60
80
90
100PN100
[bar]
-60 -40 -20 0 20 40 60 80 100 120 140 180 200160 [C]
PN63
Promass I:
Flange connection to
ANSI B16.5
Flange material:
1.4301/304
Wetted parts:
Titan Grade 9
F06-8xxxxxxx-05-xx-xx-xx-001
Promass I:
Flange connection to
JIS B2238
Flange material:
1.4301/304
Wetted parts:
Titan Grade 9
F06-8xxxxxxx-05-xx-xx-xx-002
8/8/2019 SD-Information on the Pressure Equipment Directive
9/12
Proline Promass 80/83/84 Information on the Pressure Equipment Directive
Endress+Hauser 9
Promass I:
Tri-Clamp
Process connection
The maximum process pressure for the Tri-Clamp connection is 16 bar. However, the load limit is
defined additionally by the material properties of the outer clamp used. This clamp is not included
in the scope of delivery.
# Warning!Before opening the outer clamp make sure to relieve the pressure from the pipeline!
Promass I:
Threaded union to
DIN 11864-1
Connection material:
Titan Grade 2
F06-8xIxxxxx-05-xx-xx-xx-001
Promass I:
Threaded union to
DIN 11864-2
Connection material:
Titan Grade 2
F06-8xIxxxxx-05-xx-xx-xx-002
Promass I:
Threaded union to
ISO 2853
Connection material:
Titan Grade 2
F06-8xxxxxxx-05-xx-xx-xx-005
8/8/2019 SD-Information on the Pressure Equipment Directive
10/12
Information on the Pressure Equipment Directive Proline Promass 80/83/84
10 Endress+Hauser
Additional information
All measuring devices undergo a pressure unit test with at least 1.5 times the maximum pressure
rating. For more details, please refer to the 2.3 certificate provided.
If the device is delivered with detached process connections (only for Promass M), these connec-
tions have to be included in the piping pressure test.
The sensor housing protects the inner electronics and mechanics and is filled with dry nitrogen.
It does not serve as secondary containment (only for Promass E). A pressure of 5 bar for pressure
resistance can be given as guidance for the housing.
# Warning!In case a danger of measuring tube failure exists due to process characteristics, e.g. with
corrosive process fluids, a mechanical overload of the housing can occur which could lead to
a housing failure and accordingly is connected with an increased danger potential (only for
Promass E). It is therefore of high importance to clarify the compatibility of process fluid with
the measuring tube material and to observe the specified maximum process pressure.
8/8/2019 SD-Information on the Pressure Equipment Directive
11/12
Proline Promass 80/83/84 Information on the Pressure Equipment Directive
Endress+Hauser 11
8/8/2019 SD-Information on the Pressure Equipment Directive
12/12
www.endress.com/worldwide
SD056D/06/en/01.05
50101403FM+SGML 6.0