Upload
duongkhanh
View
226
Download
5
Embed Size (px)
Citation preview
335
Driveline & engine Mounting
Section I Contents
BuCk AlgonquIn TransmissionCouplers................................................................................................................I336 PackingBoxes.............................................................................................................................I343
BuShIngS, InC. DF-100EngineMounts................................................................................................................I345 DF-206EngineMounts................................................................................................................I345 DF-216EngineMounts................................................................................................................I346 DF-236-M1,DF-237-M1,DF-238-M1EngineMounts.................................................................I346 DF-242,DF-243,DF-244,DF-245EngineMounts.......................................................................I347 DF-475-M3,DF-477-M3,DF-478-M3EngineMounts.................................................................I347 DF-2204,DF-2205,DF-2207EngineMounts...............................................................................I348 DF-3304,DF-3306,DF-3307EngineMounts..............................................................................I348 DF-4405,DF-4406,DF-04407,DF-4408EngineMounts............................................................I349 DF-4425,DF-4226,DF-4227,DF-4228EngineMounts..............................................................I349 DF-9106EngineMounts..............................................................................................................I350 RM-1060EngineMounts.............................................................................................................I350
DrIp-free pACkIng (WeStern trADIng, InC.) Flax&SyntheticPacking........................................................................................................... H333 Graphtec&GraphtexPacking.................................................................................................. H334 MoldablePacking...................................................................................................................... H334 ShaftLubricant.......................................................................................................................... H334
gloBe CoMpoSIte Drivesaver....................................................................................................................................I351 DrivesaverSelectionGuidebyEngine........................................................................................I353 DrivesaverCrossReference........................................................................................................I354 EngineMounts............................................................................................................................I356 MorSe DrivelineAccessories..................................................................................................................I357
pYI, InC. ShaftSeals..................................................................................................................................I363
i
Driveline & engine
Mounting
Western Trading, Inc.
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
336
A - Overall Length
B - Male Pilot (M type)
C - Female Pilot (F type)
D - Flange Diameter
E - Keyway Width
F - Pilot Diameter
G - Bolt Circle Diameter
H - Shaft Diameter
Buck Algonquin manufactures a full line of transmission couplers for most marine transmissions. Our cou-plers are cast from ductile iron and machined to SAE J755 specifications. Most of our couplers are machined withour universal bolthole pattern. As well, all of our couplers are supplied with mounting hardware. We also offer cus-tom machining for any couplers we do not standardly produce. We carry an extensive inventory in order to bettersupply our distributors and OEMs.
The following charts can be used to help indentify the coupler you need. The first chart is catagorized bytransmission manufacturer, while the second chart is catagorized by flange diameter. Please feel free to contact ourknowledgeable sales staff for assistance.
Shaft Diameter
Key Size
3/4'' 3/16''
7/8'' - 1-1/8'' 1/4''
1-1/4'' - 1-3/8'' 5/16''
1-1/2'' 3/8''
1-3/4'' 7/16''
2'' 1/2''
2-1/4'' 9/16''
2-1/2'' -2-3/4'' 5/8''
3'' - 3-1/4'' 3/4''
3-1/2'' - 3-3/4'' 7/8''
4'' 1''
Shaft Diameter
Part NumberSuffix
3/4'' 0757/8'' 087
1'' 100
1-1/8'' 112
1-1/4'' 125
1-3/8'' 137
1-1/2'' 150
1-3/4'' 175
2'' 200
Shaft Diameter
Part NumberSuffix
2-1/4'' 225
2-1/2'' 250
2-3/4'' 275
3'' 300
3-1/4'' 325
3-1/2'' 350
3-3/4'' 375
4'' 400
Part Number Conversion - The part numbers listed onthe following pages are only a prefix. The complete part numberwill need a suffix number below. Example: Prefix 50mc005 + shaftsize of 1-1/4''(125). The complete number would be 50mc005125.
Keyway Sizes
Solid Split Standard Taper Reverse TaperTypes of couplers offered:
transmission CouplersI
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
337
transmission Couplers I
Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''
--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''
50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''
--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''
--- --- 50tc725 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''
--- 50725a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 4-3/8''
--- 50725b --- 7-1/4'' 2'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 5-1/2''
--- --- 50tc900 9'' 2'' - 3'' 8 3/4'' 7-1/2'' 6'' x 1/4'' F 7-3/4''
--- 509001 9'' 1-1/2'' - 3'' 8 3/4'' 7-1/2'' 6'' x 1/4'' F 5-1/2''
Atomic Four (Universal)Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
50mc3500 --- --- 3.410'' 7/8'' - 1-1/8'' 3 3/8'' 2-3/4'' 1-7/8'' x 1/4'' F 2.437''
Borg Warner Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
50mc004 --- 4'' 3/4'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2-1/4''
--- 50401s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2''
--- 50400b --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 3-7/16''
50mc005 --- --- 5'' 1'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-5/8''
50mcf004 --- --- 4'' 3/4'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/16'' F 2-1/4''
50mcf005 --- --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 1/4'' F 2-5/8''
--- 50500a --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/16''
--- 50500c --- 5'' 1-1/2'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4''
--- 50500s --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-1/2''
--- --- 50tc500 5'' 1-1/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/8''
--- --- 50tc500 5'' 1-3/8'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4-1/4''
--- --- 50tc500 5'' 1-1/2''-1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 5''
--- --- 50tc005* 5'' 1-1/4'' - 1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-3/4''
--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''
--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''
50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''
--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''
* Reverse Taper Bore
Part Number
Part Number
Part Number
Allison
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
338
transmission CouplersI
Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
50mc004 --- 4'' 3/4'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2-1/4''
--- 50401s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 2''
--- 50400b --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-1/2'' x 3/32'' M 3-7/16''
50mc005 --- --- 5'' 1'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-5/8''
--- 50500a --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/16''
--- 50500c --- 5'' 1-1/2'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4''
--- --- 50tc500 5'' 1-1/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/8''
--- --- 50tc500 5'' 1-3/8'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4-1/4''
--- --- 50tc500 5'' 1-1/2''-1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 5''
Capitol Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
--- 50475a --- 4-3/4'' 1'' -1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-1/2''
--- 50475b --- 4-3/4'' 1-1/2'' - 2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4''
50mc4725 --- --- 4-3/4'' 1-1/4'' - 1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-5/8''
--- --- 50tc475 4-3/4'' 1-3/8'' - 1-3/4'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4-3/16''
--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''
--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''
50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''
--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''
--- --- 50tc725 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''
--- 50725a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 4-3/8''
--- 50725b --- 7-1/4'' 2'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 5-1/8''
Newage Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
50mc005 --- --- 5'' 1'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 2-5/8''
--- 50500a --- 5'' 1'' - 1-1/2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/16''
--- 50500c --- 5'' 1-1/2'' - 2'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4''
--- --- 50tc500 5'' 1-1/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 3-7/8''
--- --- 50tc500 5'' 1-3/8'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 4-1/4''
--- --- 50tc500 5'' 1-1/2''-1-3/4'' 4 7/16'' 4-1/4'' 2-1/2'' x 3/32'' M 5''
--- --- 50tc575 5-3/4'' 1-1/2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 5''
--- --- 50tc575 5-3/4'' 1-3/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 6-1/2''
50mc573 --- --- 5-3/4'' 1-1/2'' - 2'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-1/2''
--- 505751 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 1/2'' 4-3/4'' 3'' x 1/4'' F 4-3/16''
--- --- 50tc725 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''
--- 50725a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 4-3/8''
--- 50725b --- 7-1/4'' 2'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 5-1/8''
Part Number
Part Number
Part Number
Hurth
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
339
transmission Couplers I
Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
--- 50475a --- 4-3/4'' 1'' -1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-1/2''
--- 50475b --- 4-3/4'' 1-1/2'' - 2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4''
50mc4725 --- --- 4-3/4'' 1-1/4'' - 1-1/2'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 3-5/8''
--- --- 50tc475 4-3/4'' 1-3/8'' - 1-3/4'' 6 7/16'' 3-7/8'' 2-1/2'' x 3/16'' F 4-3/16''
-- 50501a --- 5'' 1'' -1-1/2'' 8 3/8'' 4-1/8'' 2-1/2'' x 3/32'' M 3-7/16''
--- --- 50tc501 5'' 1-1/4'' - 1-3/4'' 8 3/8'' 4-1/4'' 2-1/2'' x 3/32'' M 5-3/32''
--- 505752 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 4-3/16''
50mc574 --- --- 5-3/4'' 1-1/2'' - 2'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 4-1/2''
--- --- 50tc576 5-3/4'' 1-1/2'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 5''
--- --- 50tc576 5-3/4'' 1-3/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 6-1/2''
--- 50726a --- 7-1/4'' 1-1/4'' - 1-3/4'' 6 3/4'' 6'' 3-3/4'' x 1/4'' F 4-3/8''
--- 50726b --- 7-1/4'' 2'' - 2-1/2'' 6 3/4'' 6'' 3-3/4'' x 1/4'' F 5-1/8''
--- --- 50tc726 7-1/4'' 1-3/4'' - 2-1/2'' 6 5/8'' 6'' 3-3/4'' x 1/4'' F 7-3/4''
--- --- 50tc901 9'' 2'' - 3'' 8 7/8'' 7-1/2'' 6'' x 1/4'' F 7-3/4''
--- 509002 --- 9'' 1-1/2'' - 3'' 8 7/8'' 7-1/2'' 6'' x 1/4'' F 5-1/2''
--- 501050 --- 10-1/2'' 2-1/2'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 6-1/2''
--- --- 50tc1050 10-1/2'' 2-1/2'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 8''
Paragon Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
--- 50400a --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2'' X 3/32'' M 3-7/16''
--- 50400s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2'' X 3/32'' M 2''
50mc4020 --- --- 4'' 3/4'' - 1-3/8'' 4 3/8'' 3-1/4'' 2'' X 3/32'' M 2-1/4''
--- 50400c --- 4'' 1'' - 1-1/2'' 4 3/8'' 3-1/4'' 2-5/8'' X 3/32'' M 3-7/16''
--- 50402s --- 4'' 1'' - 1-1/4'' 4 3/8'' 3-1/4'' 2-5/8'' X 3/32'' M 2''
50mc4026 --- --- 4'' 3/4'' - 1-3/8'' 4 3/8'' 3-1/4'' 2-5/8'' X 3/32'' M 2-1/4''
50mc4526 --- --- 4-1/2'' 1'' - 1-3/4'' 4 3/8'' 3-3/4'' 2-5/8'' X 3/32'' M 2-5/8''
--- 50500b --- 5'' 1'' - 1-1/2'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 3-7/16''
--- 50500d --- 5'' 1-1/2'' - 2'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 4''
--- 50501s --- 5'' 1'' - 1-1/2'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 2-1/2''
50mc5022 --- --- 5'' 1'' - 1-3/4'' 4 3/8'' 4-1/8'' 2-1/4'' X 3/32'' M 2-5/8''
50mc5027 --- --- 5'' 1'' - 1-3/4'' 4 3/8'' 4-1/8'' 2-3/4'' X 3/32'' M 2-5/8''
Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
50mvp400 --- --- 3.945'' 3/4'' - 1-1/4'' 4 10mm 3.142'' 2.366'' x 3/32'' F 2-17/32''
Volvo Penta
Part Number
Part Number
Part Number
Twin Disc
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
340
transmission CouplersI
Solid Split TaperFlange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
--- 50400ys --- 4'' 3/4'' - 1-1/4'' 4 10mm 3.070'' 1.966'' x 5/32'' M 2''
50mcy004 --- --- 4'' 3/4'' - 1-3/8'' 4 10mm 3.070'' 1.966'' x 5/32'' M 2-1/4''
--- 50500ys --- 4-3/4'' 1'' - 1-1/2'' 4 10mm 3.937'' 2.556'' x 1/8'' M 3-7/16''
50mcy005 --- --- 4-3/4'' 1'' - 1-3/4'' 4 10mm 3.937'' 2.556'' x 1/8'' M 2-3/8''
50mcy4Lh --- --- 5.120'' 1'' - 1-1/2'' 4 10mm 4-1/4'' 2.499'' x 3/16'' M 3-29/32''
Yanmar
Solid Split TaperFlange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
--- 50476a --- 4-3/4'' 1'' -1-1/2'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 3-1/2''
--- 50476b --- 4-3/4'' 1-1/2'' - 2'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 4''
50mc4726 --- --- 4-3/4'' 1-1/4'' - 1-1/2'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 3-5/8''
--- --- 50tc476 4-3/4'' 1-3/8'' - 1-3/4'' 6 12mm 3-7/8'' 2-1/2'' x 3/16'' F 4-3/16''
50mc574 --- --- 5-3/4'' 1-1/2'' - 2'' 6 16mm 4-3/4'' 3'' x 1/4'' F 4-1/2''
--- 505752 --- 5-3/4'' 1-1/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 4-3/16''
--- --- 50tc576 5-3/4'' 1-1/2'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 5''
--- --- 50tc576 5-3/4'' 1-3/4'' - 2-1/4'' 6 5/8'' 4-3/4'' 3'' x 1/4'' F 6-1/2''
--- 50610b --- 6.10'' 1-3/4'' - 2-1/2'' 10 5/8'' 4.921'' 3.94'' x .215'' F 5''
--- --- 50tc610 6.10'' 2'' - 2-1/4'' 10 5/8'' 4.921'' 3.94'' x .215'' F 6-1/2''
--- 50669 --- 6.69'' 1-3/4'' - 2-1/2'' 12 16mm 5.512'' 4.530'' x 9/32'' F 5''
--- --- 50tc669 6.69'' 2'' 12 16mm 5.512'' 4.530'' x 9/32'' F 6-1/2''
--- --- 50tc669 6.69'' 2-1/4'' - 3'' 12 16mm 5.512'' 4.530'' x 9/32'' F 7-1/2''
--- --- 50tc725g 7.283'' 2'' - 2-1/4'' 12 18mm 6.122'' 4.725'' x 9/32'' F 6-1/2''
--- --- 50tc725g 7.283'' 2-1/2'' - 3'' 12 18mm 6.122'' 4.725'' x 9/32'' F 7-1/2''
--- 50886 --- 8.86'' 2'' - 2-1/2'' 8 16mm 7.717'' 5.514'' x 1/4'' F 5-1/2''
--- --- 50tc886 8.86'' 2'' - 4'' 8 16mm 7.717'' 5.514'' x 1/4'' F 7-3/4''
--- 501050 --- 10-1/2'' 2-1/2'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 6-1/2''
--- --- 50tc1050 10-1/2'' 2-1/4'' - 4'' 8 1'' 8-3/4'' 5'' x 1/4'' F 8''
Solid Split Taper Flange Dia. Shaft Range # of Bolts Bolt Size Bolt Circle Pilot Overall Length
--- 50400d --- 4'' 1-1/2'' 8 3/8'' 3-1/4'' 2'' x 3/16'' F 3-3/8''
Miscellaneous
ZF
Part Number
Part Number
Part Number
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
341
transmission Couplers I
Flange Dia. Transmission Model Number Pilot M/F # of
BoltsBolt Dia.
Bolt Circle Solid Split Taper
3.410'' Universal Atomic 4 1.876''/F 3 3/8'' 2-3/4'' 50mc3500 --- ---
3.945'' Volvo Penta MB10A, MD38, MD7A, MD11C 2.362''/F 4 3/8'' 3.149'' 50mvp400 --- ---
4'' Hurth HBW5, 10, 20, 50, 100, 125, 125H, 150, 150A,150V, 220, 250, HSW450D, 250H, 250A 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---
4'' Borg Warner 70C, 1017, 1023, 2301 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---
4'' Newage PRM Delta 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---
4'' Paragon HF, HB, RD 2''/M 4 3/8'' 3-1/4'' 50mc4020 50400s, 50400a ---
4'' Paragon P-200, P-300, P-13, PV-300 2-5/8''/M 4 3/8'' 3-1/4'' 50mc4026 --- ---
4'' ZF ZF5M, 10M, 12M, 12, 15M, 15MA, 15MIV,25M, 25MA, 30M, 45C, 25, 25A,45IV 2-1/2''/M 4 3/8'' 3-1/4'' 50mc004 50401s, 50400b ---
4-1/2'' Paragon RA, PV400 2-5/8''/M 4 3/8'' 3-3/4'' 50mc4526 --- ---
4-3/4'' Capitol 5HD200 2-1/2''/F 6 7/16'' 3-7/8'' 50mc4725 50475a, 50475b 50tc475
4-3/4'' Twin Disc MG-502, 502-1 2-1/2''/F 6 7/16'' 3-7/8'' 50mc4725 50475a, 50475b 50tc475
4-3/4'' Yanmar 30M30H/G, KVH20, KHIS 2.556/M 4 10mm 3.937'' 50mcy005 50500ys ---
4-3/4'' ZF ZF220A, IRM220A1, IRM220A/V, ZF220V,IRM220V2, IRM225A 2-1/2''/F 6 12mm 3-7/8'' 50mc4726 50476a, 50476b 50tc476
5'' Borg Warner 72C-1017, 1018, 1004, 1005, 1013, 1014, 2001 2-1/2''/F 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500
5'' Hurth
HS25A, HS45A, HS63IV, HSW630A, 630H,630V, 880D, 450A2, 630D, 630A1, 630H1,
630V1, 90ATS, 90TS, 90VTS, 110TS,HBW630,630A, 400, 450, 600, 630
2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500
5'' Newage PRM 210/160 2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500
5'' Paragon P-400 2-3/4''/M 4 3/8'' 4-1/8'' 50mc5027 50500b,50500d ---
5'' Twin Disc 5010A, 5011A 2-1/2''/M 8 7/16'' 4-1/4'' --- 50501a ---
5'' Volvo Penta MS, MS3, MS4A, MV2 2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500
5'' ZFZF88C, 45A, 63A, 63C, 63IV, 90ATS, 90TS,110TS, IRM41A2, 50A2, 50V2, 50V3, 501,
50A2/K3, 50V2/3LD2-1/2''/M 4 7/16'' 4-1/4'' 50mc005 50500a, 50500c 50tc500
5.120'' Yanmar 4LH-TE/4LH-HTE 2-1/2''/M 4 1 4-1/4'' 50mcy4Lh --- ---
5-3/4'' Allison n/a 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575
5-3/4'' Borg Warner n/a 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575
5-3/4'' Capitol 2H3/4HE-10200, 2HE/4H3-11200, M105, M125 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575
5-3/4'' Hurth HSW800A, 800V, 800VI, 110VTS 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575
5-3/4'' Hurth HSW800A2, 800A3, 110ATS 3''/F 6 5/8'' 4-3/4'' 50mc574 505752 50tc576
Transmission GuidePart Number
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
342
transmission CouplersI
Flange Dia. Transmission Model Number Pilot M/F # of
BoltsBolt Dia.
Bolt Circle Solid Split Taper
5-3/4'' Newage PRM302, 310, 401, 402, 500D, 601, 601A 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575
5-3/4'' Twin DiscMG506, 5061A, 5062V, 507, 5050, 5050A,5050V, 5061, 506-1, 506A, 507-2, 507-1,
507A-1, 507A-23''/F 6 5/8'' 4-3/4'' 50mc574 505752 50tc576
5-3/4'' ZF IRM,301, 220V/LD, ZF80IV, 85IV, 110IVTS,220IV 3''/F 6 1/2'' 4-3/4'' 50mc573 505751 50tc575
5-3/4'' ZF
IRM220PL, 280A, 280V-LD-1, 300VTS, 301A-1,301A-2,301PL-, 301PL-2, ZF80A, 85A, 110ATS,220, 2801, 2801A, 280IV, 280A, 285A, 285IV,
286A, 286IV, 3001TS, 3001ATS, 300IVTS, 301A,301C
3''/F 6 5/8'' 4-3/4'' 50mc574 505752 50tc576
6.10'' ZF ZF3051, 305A, 3051A 3.94''/F 10 16mm 4.921'' --- 50610b 50tc610
6.69'' ZF ZF325ATS, 325IV, 325IVTS, 325TS, 3251, 3251A,IRM325A, 165PL 4.528''/F 12 16mm 5.512'' --- 50669 50tc669
7-1/4'' Allison M 3-3/4''/F 6 5/8'' 6'' --- 50725a, 50725b 50tc725
7-1/4'' Allison M 3-3/4''/F 6 3/4'' 6'' --- 50726a, 50726b 50tc726
7-1/4'' Capitol 4HE10700, 11700, HY22000, 24000, HY2500,HY6900 3-3/4''/F 6 5/8'' 6'' --- 50725a, 50725b 50tc725
7-1/4'' Capitol D5072 3-3/4''/F 6 3/4'' 6'' --- 50726a, 50726b 50tc726
7-1/4'' Newage PRM60, 601, 601A 3-3/4''/F 6 5/8'' 6'' --- 50725a, 50725b 50tc725
7-1/4'' Twin DiscMG506, 5065A, 507, 507-1, 507-2, 507A-1,507A-2, 5075, 5075A, 5075IV, 5085, 509,
509-1SC, 508-1, 509-1, 5091V, 509-1SC, 5090A 3-3/4''/F 6 3/4'' 6'' --- 50726a, 50726b 50tc726
7-1/4'' ZF IRM310AL, V250M 3-3/4''/F 6 16mm 6'' --- 50725a, 50725b 50tc725
7-1/4'' ZFIRM302VLD1, 302V/6, 304A, 310A, 310PL,
311A, 311A-1, 311PL, 312TS, V250M, ZF302IV,304A, 304C, 311A, 312TS
3-3/4''/F 8 16mm 6'' --- 50725bzf 50tc72zf
7.28'' ZF
BW190, 195, 195P, 2000A, 2060A, ZF2000,2000A, ZF2000V, 2050, 2050A, 2050V, 2060,2060A, 2060V, 2070, 2070V, 2150, 2150A,
2150V,
4.725''/F 12 18mm 6.122'' --- --- 50tc725g
7.87'' ZF IRM200, 320PL, V250M 5.511''/F 8 16mm 6.732'' --- 50787zf ---
8.07'' ZF
BW155, 155A, 155ATS, 155TS, 155V, IRM311PL,320, 320A, 350-A, 350A-2, 350AL/PL, 350ATS,350PL-2, 350TS, 350V-LD-1,350V, ZF311, ZF350,
350A, 350ATS, 350IV, 350TS, 350V, 500A,500IV, 510A, 550, 550A, 550ATS, 550TS, 665,
665A, 665ATS, 665TS, 665V,
5.511''/F 10 18mm 6.692'' --- 50807zf 50tc807
8.86'' ZF IRM320, 320A, 320/LAV, 3202, ZF320,ZF550VTS 5.514''/F 8 16mm 7.717'' --- 50886 50tc886
8.86'' ZFBW250, 250V, 2500A, 255, 255A, 255AP, 255P,
255V, 255VP, ZF2500, 2500A, 2500V, 2550,2550A, 2550V, 2555V, 2555, 2555A, 2555V,
5.514''/F 15 16mm 7.717'' --- ---- 50tc886
9'' Allison M20 6''/F 8 3/4'' 7-1/2'' --- 509001 50tc900
9'' Allison MH, 15R-L 6''/F 8 7/8'' 7-1/2'' --- 509002 50tc901
9'' Twin Disc MG510A, 5111A, DD511, 510, 5111SC,5114A, 5135A 6''/F 8 7/8'' 7-1/2'' --- 509002 50tc901
9'' ZF IRM320AL 6''/F 8 7/8'' 7-1/2'' --- 509002 50tc901
10-1/2'' Twin Disc MG509, 512, 513, 514, 514C 5''/F 8 1'' 8-3/4'' --- 501050 50tc1050
10-1/2'' ZF IRM320LAV 5''/F 8 1'' 8-3/4'' --- 501050 50tc1050
Transmission Guide - Continued
Part Number
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
343
Bronze packing Boxes I
PartNumber
ShaftSize
HoseI. D.
PackingSize
Weight,lbs.
00pb75 3/4'' 1-1/2'' 3/8'' 1.75
00pb88 7/8'' 1-3/4'' 5/16'' 1.75
00pb100x 1'' 1-1/2'' 1/4'' 1.75
00pb100 1'' 1-3/4'' 1/4'' 1.75
00pb100fg 1'' 2'' 1/4'' 1.90
00pb100225 1'' 2-1/4'' 1/4'' 2.30
00pb113 1-1/8'' 1-3/4'' 3/16'' 1.75
00pb113fg 1-1/8'' 2'' 3/16'' 1.90
00pb113h 1-1/8'' 2-1/4'' 3/16'' 2.80
00pb125175 1-1/4'' 1-3/4'' 1/4'' 2.75
00pb125fg 1-1/4'' 2'' 1/4'' 2.30
00pb125 1-1/4'' 2-1/4'' 1/4'' 2.85
00pb138 1-3/8'' 2-1/2'' 5/16'' 3.35
00pb15225 1-1/2'' 2-1/4'' 1/4'' 3.80
00pb150 1-1/2'' 2-1/2'' 1/4'' 3.35
jpb175 1-3/4'' 2-1/2'' 3/8'' 5.70
00pb175 1-3/4'' 3'' 1/2'' 8.00
00pb175L 1-3/4'' 3-1/2'' 1/2'' 9.00
00pb200 2'' 3'' 3/8'' 8.00
00pb200L 2'' 3-1/2'' 3/8'' 9.00
00pb225 2-1/4'' 3-1/2'' 7/16'' 12.00
00pb250 2-1/2'' 3-1/2'' 5/16'' 12.00
00pb300 3'' 4-1/2'' 9/16'' 30.00
Bronze Packing Boxes - Self Aligning - Spud Type - Right Hand ThreadComplete w/ hose, four s/s clamps, packing nut & lock nut - Sold complete
PartNumber
ShaftSize
HoseI. D.
Packing Size
Weight,lbs.
00pb113Lh 1-1/8'' 1-3/4'' 3/16'' 1.75
00pb125Lh 1-1/4'' 2-1/4'' 1/4'' 2.85
00pb150Lh 1-1/2'' 2-1/2'' 1/4'' 3.35
00pb175Lh 1-3/4'' 3'' 1/2'' 8.00
00pb200Lh 2'' 3'' 3/8'' 8.00
00pb225Lh 2-1/4'' 3-1/2'' 7/16'' 12.00
00pb250Lh 2-1/2'' 3-1/2'' 5/16'' 12.00
Bronze Packing Boxes - Self Aligning - Spud Type - Left Hand ThreadComplete w/ hose, four clamps, packing nut & lock nut - Sold complete
See next page for replacement parts.
See next page for replacement parts.
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
344
Packing Spuds - Sold each
Replacement Parts for Packing Boxes - Spud Type
Part Number Use With Part Numbers
0075pbs 00pb75
0088pbs 00pb88
00100pbs 00pb100x, 00pb100, 00pb100fg &00pb100225
00113pbs 00pb113, 00pb113fg & 00pb113h
00125pbs 00pb125175, 00pb125fg, & 00pb125
00138pbs 00pb138
00150pbs 00pb15225, 00pb150
00175pbsoy jbpb175
00175pbs 00pb175 & 00pb175L
00200pbs 00pb200, 00pb200L
00225pbs 00pb225
00250pbs 00pb250
00300pbs 00pb300
00125pbsL 00pb125Lh
3059pbs 00pb113Lh
00150pbsLh 00pb150Lh
00175pbsLh 00pb175Lh
00200pbsLh 00pb200Lh
00225pbsLh 00pb225Lh
00250pbsLh 00pb250Lh
Part Number Use With Part Numbers
00100pbn00pb75, 00pb88, 00pb100x,
00pb100, 00pb100fg, 00pb100225,00pb113, 00pb113fg & 00pb113h
00125pbn 00pb125175, 00pb125fg & 00pb125,
00138pbn 00pb138, 00pb15225 & 00pb150,
00175pbnoy jpb175
00175pbn 00pb175, 00pb175L, 00pb200 & 00pb200L
00225pbn 00pb225 & 00pb250
00300pbn 00pb300
3059pbn 00pb113Lh
00125pbnL 00pb125Lh
00150pbnLh 00pb150Lh
00175pbnLh 00pb175Lh & 00pb200Lh
00225pbnLh 00pb225Lh & 00pb250Lh
Part NumberWorm Gear
Use With Part Numbers
80ho150 00pb75, 00pb100x
80ho175 00pb88, 00pb100, 00pb113,00pb125175, 00pb113Lh
80ho200 00pb100fg, 00pb113fg, 00pb125fg
80ho225 00pb100225, 00pb113h, 00pb125,00pb15225, 00pb125Lh
80ho250 00pb138, 00pb150, jpb175,00pb150Lh
80ho300 00pb175, 00pb200, 00pb175Lh,00pb200Lh
80ho350 00pb175L, 00pb200L, 00pb225,00pb250, 00pb225Lh, 00pb250Lh
80ho450 00pb300
Part NumberWorm Gear
Part NumberT-Bolt
Use With Part Numbers
70hss32c 70stbc225 00pb75 & 00pb100x
70hss36c 70stbc238 00pb88, 00pb100, 00pb113,00pb125175 & 00pb113Lh
70hss40c 70stbc275 00pb100fg, 00pb113fg & 00pb125fg
70hss44c 70stbc30000pb100225, 00pb113h,
00pb125, 00pb15225 & 00pb125Lh
70hss48c 70stbc325 00pb138, 00pb150, jpb175& 00pb150Lh
70hss56c 70stbc375 00pb175, 00pb200,00pb175Lh & 00pb200Lh
70hss72c 70stbc42500pb175L, 00pb200L,00pb225, 00pb250,
00pb225Lh & 00pb250Lh
70hss88c 70stbc532L 00pb300
Lock Nuts - Sold each
Hoses - Sold each Clamps - Sold each
Spud
Clamps
LockNut
Hose
replacement parts for packing BoxesI
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
345
engine Mounting I
SuggeSteD MountIngS:
engine Weights 4 point Mountings Upto850lbs DF-100
DF-100 Engine MountThe (“Dual Flex”) DF-100 Engine Mount features heavydutycastaluminumalloyconstructionwithadurableoilandfuelresistantelastomerelementforlonglife.Lowestprofile mount-requires only 1 7/8" minimum clearancefromcastingbasetotopoflevelingnut.Easyinstallationwith threaded 5/8" stud for vertical height adjustment,furnishedcompletewithleveling,andlockingnuts.
Aluminum base cast with one 3/8" mounting hole andone slotted hole for either 3/8" bolts or lag screws, on4" centers. All steel parts are zinc dichromate platedfor corrosion resistance. Recommended for 4 pointmountingsupto850pounds.
DF-206 Engine Mount The DF-206 Engine Mount recommended for all 4 and6 cylinder, and V8 gas powered engines up to 800 lbs.Thismountfeaturesheavydutyaluminum356-T6alloyconstructionwithlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine-coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly23/8"minimumclearance from casting base to top of leveling nut. Failsafe design - bottom pad prevents excessive impact.Easyinstallationwith5/8"threadedstudforverticalheightadjustment.Aluminumbasecastwithone1/2"mountingholeandoneslottedholeforeither1/2"boltsorlagscrewson4"centers.Mounts furnishedcompletewith leveling,andlockingnuts.Allsteelpartsarezincdichromateplatedforcorrosionresistance.
SuggeSteD MountIngS:
engine Weights 4 point Mountings Upto800lbs DF-206
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
346
engine MountingI
SuggeSteD MountIngS:
engine Weights 4 point Mountings Upto1,200lbs DF-216
DF-216 Engine Mount The DF-216 Engine Mount recommended for all 4 and6cylinder,andV8gaspoweredenginesupto1200lbs.Thismountfeaturesheavydutyaluminum356-T6alloyconstructionwithlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine-coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly23/8"minimumclearance from casting base to top of leveling nut. Failsafe design - bottom pad prevents excessive impact.Easyinstallationwith3/4"threadedstudforverticalheightadjustment.Aluminumbasecastwithone1/2"mountingholeandoneslottedholeforeither1/2"boltsorlagscrewson4"centers.Mounts furnishedcompletewith leveling,andlockingnuts.Allsteelpartsarezincdichromateplatedforcorrosionresistance.
DF-236-M1, DF 237-M1, DF-238-M1 Series Engine Mount The DF-236-M1 Series of heavy duty mountings isdesignedprincipallyfordieselenginesinthe1,100–2,200lb.range.Basecastingfeaturesheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine–coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly25/8"minimumclearance from casting base to top of leveling nut. Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwith3/4"threadedstudforverticalheightandslotted casting for horizontal adjustment. Mounts comecomplete-furnishedwiththreenuts:leveling,lockingandsecondarylock.Aluminumbasecastingwith1/2"slottedholesfor1/2"boltsorlagscrews.Allsteelpartsarezincdichromate plated for corrosion resistance. Available inthree size ratings (shown below) dependant on engine/powertrainpackageweight.
SuggeSteD MountIngS:
engine Weights 4 point Mountings 1,100to1,500lbs DF-236-M1 1,500to1,800lbs DF-237-M1 1,800to2,200lbs DF-238-M1
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
347
engine Mounting I
SuggeSteD MountIngS:
engine Weights 4 point Mountings 2,200to2,600lbs DF-242 2,600to2,900lbs DF-243 2,900to3,200lbs DF-244 3,200to3,500lbs DF-245
DF-242, DF-243, DF-244, DF-245 Series Engine Mount The DF-242 Series of heavy duty mountings is a twinstuddoublemountdesignedprincipallyfordieselenginesfrom 2,200 up to 3,500 lbs. in weight. Base castingfeaturesheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine.Durableoilandfuelresistantelastomerelement.Lowprofilemount-requiresonly25/8"minimumclearance from casting base to top of leveling nut. Failsafe design - bottom pad prevents excessive impact.Easy installation with 3/4" threaded studs for verticalheight and slotted casting for horizontal adjustment.Mounts come complete - furnished with leveling, andlockingnuts.Aluminumbasecastwiththree5/8"slottedmountingholeson101/2"centers.Allsteelpartsarezincdichromate plated for corrosion resistance. Available infour size ratings (shown below) dependant on engine/powertrainpackageweight.
DF-475-M3, DF-477-M3, DF-478-M3 Series Engine Mount The DF-475-M3 Series of heavy duty mountings isdesignedprincipallyfordieselenginesinthe950–2,000lb.range.Basecastingfeaturesheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine–coatedblacktoresist corrosion. Durable oil and fuel resistant elastomerelement. Low profile mount - requires only 3" minimumclearance from casting base to top of leveling nut. Truefloating mount with fail safe design - bottom cast basepadpreventsexcessiveimpact.Easyinstallationwith3/4"threaded stud for vertical height and slotted casting forhorizontaladjustment.Mountscomecomplete-furnishedwith three nuts: leveling, locking and secondary lock.Aluminumbasecastwith1/2"slottedholesfor1/2"boltsorlagscrews.Allsteelpartsarezincdichromateplatedforcorrosionresistance.Availableinthreesizeratings(shownbelow)dependantonengine/powertrainpackageweight.
SuggeSteD MountIngS:
engine Weights 4 point Mountings 950to1,200lbs DF-475-M3 1,200to1,600lbs DF-477-M3 1,600to2,000lbs DF-478-M3
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
348
engine MountingI
SuggeSteD MountIngS:
engine Weights 5/8" Stud 1/2" Stud Upto150lbs DF-2204-2 DF-2204-1 150to450lbs DF-2205-2 DF-2205-1 450to750lbs DF-2207-2 DF-2207-1
DF-2204, DF-2205, DF-2207 Series Engine Mount TheDF-2200Series featuresheavydutyaluminumalloyconstructionwithlipincorporatedinthetopofthecastingto resist the upward pull of the engine. Durable oil andfuelresistantelastomerelementraisedabovetopofthecasting to accommodate engine mounting angles. Lowprofile mount-requires only 2 3/8" minimum clearancefromcastingbasetotopoflevelingnut.Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwiththreadedstudforverticalheightandslottedcastingforhorizontaladjustment.Studfurnishedwiththreenuts.Leveling, locking and secondary lock. Aluminum basecastwith3/8"slottedholesfor3/8"boltsorlagscrews.All steel parts are zinc dichromate plated for corrosionresistance.Availablewith5/8"studor1/2"stud,andthreesize ratings dependant on engine/powertrain packageweight.
DF-3304, DF-3306, DF-3307 Series Engine Mount TheDF-3300Series featuresheavydutyaluminumalloyconstructionwithlipincorporatedinthetopofthecastingto resist the upward pull of the engine. Durable oil andfuelresistantelastomerelementraisedabovetopofthecasting to accommodate engine mounting angles. Lowprofile mount-requires only 2 7/8" minimum clearancefromcastingbasetotopoflevelingnut.Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwiththreadedstudforverticalheightandslottedcastingforhorizontaladjustment.Studfurnishedwiththreenuts.Leveling, locking and secondary lock. Aluminum basecastwith1/2"slottedholesfor1/2"boltsorlagscrews.All steel parts are zinc dichromate plated for corrosionresistance.Availablewith3/4"stud in threesize ratingsdependantonengine/powertrainpackageweight. SuggeSteD MountIngS:
engine Weights 4 point Mountings 750to1,000lbs DF-3304-3 1,000to1,400lbs DF-3306-3 1,400to1,600lbs DF-3307-3
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
349
engine Mounting I
SuggeSteD MountIngS:
engine Weights 4 point Mountings 1,400to1,800lbs DF-4405-4 1,800to2,200lbs DF-4406-4 2,200to2,500lbs DF-4407-4 2,500to2,800lbs DF-4408-4
DF-4405, DF-4406, Df-04407, DF-4408 Series Engine MountTheDF-4400Seriesofheavydutymountingsisdesignedprincipally for diesel engines in the 1,400 - 2,800 lb.range.Basecasting featuresheavydutyaluminumalloyconstruction,withlipincorporatedinthetopofthecastingtoresisttheupwardpulloftheengine-coatedblacktoresistcorrosion.Durableoiland fuel resistantelastomerelement.Lowprofilemount-requiresonly33/8"minimumclearance from casting base to top of leveling nut. Failsafedesign-bottompadpreventsexcessiveimpact.Easyinstallationwithfull1"threadedstudforverticalheightandslotted casting for horizontal adjustment. Mounts comecomplete-furnishedwiththreenuts:leveling,lockingandsecondary lock. Aluminum base cast with 1/2" slottedmountingholesfor1/2"boltsorlagscrewson5"centers.All steel parts are Zinc plated for corrosion resistance.Availableinfoursizeratings(shownbelow)dependantonengine/powertrainpackageweight.
DF-4425, DF-4226, DF-4227, DF-4228 Series Engine Mount The DF-4420 Series of heavy duty mountings is a twinstud double mount designed principally for dieselenginesinexcessof2,800lbs.upto5,600lbs.inweight.Thesemountsaregenerally usedon the “heavy (marinetransmission)end"oftheenginealongwithDF-4400Seriesmounts on the front of the engine. Durable oil and fuelresistantelastomerelement.Lowprofilemount-requiresonly33/8"minimumclearancefromcastingbasetotopof leveling nut. Fail safe design - bottom pad preventsexcessive impact. Easy installation with full 1" threadedstudsforverticalheightandslottedcastingforhorizontaladjustment.Mountscomecomplete-furnishedwiththreenuts:leveling,lockingandsecondarylock.Aluminumbasecastwith1/2"slottedmountingholesfor1/2"boltsorlagscrews on 9" centers. All steel parts are zinc plated forcorrosionresistance.Availableinfoursizeratings(shownbelow)dependantonengine/powertrainpackageweight.
SuggeSteD MountIngS:
engine Weights 4 point Mountings 2,800to3,600lbs DF-4425-4 3,600to4,400lbs DF-4426-4 4,400to5,000lbs DF-4427-4 5,000to5,600lbs DF-4428-4
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
350
engine MountingI
SuggeSteD MountIngS:
engine Weights 4 point Mountings 1,800to2,400lbs DF-9106
DF-9106 Series Engine Mount The DF-9106 Engine Isolator Mount is specificallydesignedforIn-LineSixCylinderDieselconfigurationsinthe300-485Horsepowerrange.Thismountisaprovendesign developed to absorb the angular prop thrustloadsexertedatpeaktorqueminimizingforwardangularmovementaswellassidetosidemovementinroughseas.Featuresaheavydutyaluminumcasting-withdurableoiland fuel resistantelastomerelement.Lowprofilemount- requires only 3 1/2" minimum clearance from base totop of leveling nut. Mount comes complete - furnishedwiththreenuts:leveling,lockingandfullsecondarylock,plustwowashers.Easy installationwith full1" threadedstud for vertical height adjustment, and aluminum basecast with 1/2" slotted mounting holes for 1/2" bolts orlagscrewson5"centers.Studs,nutsandwasherszincplatedtoresistcorrosion.
RM-1060 Engine MountTheRM-1060RearInboardMountspecificallydevelopedfor the transmission end of marine engine inboardapplications. This mount provides a fail safe designdeveloped to absorb the angular prop thrust loadsexertedatpeaktorqueminimizingforwardangularmountmovement.Featuresaheavydutycasting-coatedblacktoresistcorrosion.Durableoilandfuelresistantelastomerelement.Lowprofilemount-requiresonly23/8"minimumclearance from base to top of leveling nut - allows theenginetobe installed lower in theboat inspace limitedinstillations.Easyinstallationwithzincdichromateplated3/4"threadedstudforverticalheightadjustment,and4"mountingholecentersfor1/2"boltsorlagscrews.
SuggeSteD MountIngS:
GasInboardInstallationsEngineTransmissionEnd
120-575HP
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
351
Driveline & engine
Mounting
I
Flax PackingFlaxpackingisthestandardreplacementproductforstuffingboxesworldwide.Thispackingisbraidedfromqualityrovingsandisthenimpregnatedwithagenerousamountoflubricationmaterial.Theresultisaqualitypackingatacompetitivecost.TempLimitPSILimitFPMLimit200F150psi1900
Model Description Master pack
10001 2’x1/8”Coil 12Packs10002 2’x3/16”Coil 12Packs10003 2’x1/4”Coil 12Packs10004 2’x5/16”Coil 12Packs10005 2’x3/8”Coil 12Packs10006 2’x7/16”Coil 12Packs10007 2’x1/2”Coil 12Packs10008 2’x5/8”Coil 12Packs
PTFE Flax PackingPTFEPackingisflaxpackingbraidedfromstrongrovingsandthenimpregnatedwithTeflon®(PTFE).Thiscombinationoffershigherperformanceandlongerpackinglife.TempLimitPSILimitFPMLimit220F160psi1900.
Model Description Master pack
10015 2’x1/8”Coil 6Packs10016 2’x3/16”Coil 6Packs10017 2’x1/4”Coil 6Packs10018 2’x5/16”Coil 6Packs10019 2’x3/8”Coil 6Packs10020 2’x7/16”Coil 6Packs10021 2’x1/2”Coil 6Packs10022 2’x5/8”Coil 6Packs
Tefpack® Synthetic PackingTefpack®shaftpackingisauniqueproduct.ItisconstructedfromastrongsyntheticyarnandisthenimpregnatedwithTeflon®.Thesyntheticyarnisnotsubjecttoattackbythemildew/rotcycleTempLimitPSILimitFPMLimit500F500psi1900.
Model Description Master pack
10030 2’x1/8”Coil 6Packs10031 2’x3/16”Coil 6Packs10032 2’x1/4”Coil 6Packs10033 2’x5/16”Coil 6Packs10034 2’x3/8”Coil 6Packs10035 2’x7/16”Coil 6Packs10036 2’x1/2”Coil 6Packs10037 2’x5/8”Coil 6Packs
Drip-free packing
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
352
Driv
elin
e &
eng
ine
Mou
ntin
g
I
Graphtec Graphite PackingGRAPHTECshaftpackingisthecombinationofgraphitebraidedfibers,imprgnatedwithPTFTtoproduceapackingthatwillgivetheultimatelevelofperformance.TempLimitPSILimit1200F2800psi.
Model Description Master pack
10220 2’x1/8”Coil 6Packs10221 2’x3/16”Coil 6Packs10222 2’x1/4”Coil 6Packs10223 2’x5/16”Coil 6Packs10224 2’x3/8”Coil 6Packs10225 2’x7/16”Coil 6Packs10226 2’x1/2”Coil 6Packs10227 2’x5/8”Coil 6Packs
Graphtex Ultra (GTU) Shaft PackingGraphtexUltra(GTU)shaftpackingisfuturetechnologythatisavailablenow.GTUpackingisauniqueblendofW.L.GOREfibersandgraphitefibersthatareimpregnatedwithPTFE.ThiscombinationoffibersproducesapackingthatisTHERMALCONDUCTIVE,strongandverydurable.TheTHERMALCONDUCTIVEfeaturedissipatesheatawayfromthestuffingboxallowingittoruncoolerandmoreefficient.
Model Description Master pack
10240 1/8” 6EA
10241 3/16” 6EA
10242 1/4” 6EA
10243 5/16” 6EA
10244 3/8” 6EA
10245 7/16” 6EA
10246 1/2’ 6EA
10247 5/8’ 6EA
Syntef® Shaft LubricantModel Description Master pack10150 SYNTEFShaftLubricant1oz. 12ea.
Drip Less® Moldable PTFE Packing
Model Description Master pack10146 Drip-FreeStarterKit 6Kits PacksUpToEight(8) RingsWillPack11/2”Shaft PacksUpToEight(8) 6Kits ToFifteen(15)Rings RingsWillPack3”
Drip-free packing
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
353
the Drivesaver™ I
Total Protection for Your Drive Train
Absorbs vibration, reducing noise. The drivesaver provides a flexible, non-metallic barrier betweenyour transmissionandshaft. Thisbarrier reducesnotonlydrivetrain vibration, but the transmission of vibration and noise toyou,yourcrewandthewater.Bothyouandyourvesselaremoreefficientinthisquieterenvironment.
Absorbs shock. The drivesaver effectively absorbs thrust and torque from the propeller shaft aswellasexcessiveshockfromchanginggearsandhighspeedplaning.Italsohelpscontroldamageandmisalignmentfromtorsionalenginemovement.Anditkeepsonworking,undernormalconditions,forthelifeofthedrivetrain,withnolubricationormaintenance.
prevents electrolysis. Thedrivesaverprovidesanimperviousbarrierthatblockselectricalcurrentsfromthewater.Yourengineandtransmissionareprotectedfromdamagingcorrosion.
Acts as a circuit breaker. Repeatusersof thedrivesaver installnewonesnotbecauseanoldoneworeout,butbecauseofahiddenlog,line,orrockthatdestroyedthecoupling.That’sright,thedrivesaverwasdestroyed,notthecostlytransmissionandengine.Byactinglikeacircuitbreaker,thedrivesaverabsorbstheextremeshockandtorqueofcollision,breaksapart,andleavesyourtransmissionandengineintact.You’rebackinoperation
faster,ataminimumcost.That’sthekindoftotalprotectionyoucan’taffordtobewithout!
Installs easily. Thedrivesaverinstallssimplyandquickly.WIthoutcuttingormachiningtheshaft.Andwithouthaulingyourboatoutofthewater.Justseparatethedriveflanges,insertthecoupling,alignandbolt.
Todeterminetorqueratingusethisformula:Enginehorsepowerx5252xreductionratio
EngineR.P.M.
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
354
Drivesaver™ SpecificationsI
Model Flange # of Bolt Bolt Pilot Coupling Coupling Packaged torque Plus rated Diameter Bolts Diameter Circle Diameter Diameter thickness Weight (lbs) rating (ft lb) ft/lb)
303 3 3 3/8 2-1/2 1-3/4 4 11/16 1 225353 3-1/2 3 3/8 2-3/4 1-7/8 4-5/16 11/16 1-1/4 250354 3-1/2 4 8mm 2-15/16 1-9/16 4-1/4 1 1-1/2 300404 4 4 3/8 3-1/4 2 5 1 1-3/4 550404A 4 4 3/8 3-1/4 2-1/2 5 1 1-3/4 550404AC 4 4 3/8 3-1/4 2-5/8 5 1 1-3/4 550404V 4 4 10mm 8cm 6cm 5 1 1-3/4 550404S 4 4 3/8 9cm 6cm 5-1/4 1 2-1/4 550424Y 100mm 4 10mm 78mm 50mm 4-1/4 1 1-3/4 550454 4-1/2 4 3/8 3-3/4 2-5/8 5-3/8 1 2-1/4 5704756 4-3/4 6 7/16 3-7/8 2-1/2 5-3/8 1 2-3/4 675 1600504 5 4 7/16 4-1/4 2-1/2 6 1 2-1/2 675 1600504A 5 4 3/8 4-1/8 2-3/4 6 1 2-1/2 675504AC 5 4 7/16 4-1/8 2-7/8 6 1 2-1/2 675504H 5 4 7/16 4-1/4 2-1/2 5-1/8* 1 2-1/2 675 1600524Y 120mm 4 10mm 100mm 65mm 5-1/4 1 2-1/4 675554 5-1/2 4 3/8 4-5/8 3-1/8 6-1/2 1 3 7205756 5-3/4 6 1/2 4-3/4 3 6-13/16 1-1/8 4-1/4 1800 30005756A 5-3/4 6 1/2 4-3/4 3 6-3/8 1-1/8 4 1800 30006256 6-1/4 6 7/17 5-3/8 3-1/4 7-1/4 1-1/16 4-1/4 19007256 7-1/4 6 5/8 6 3-3/4 8-3/8 1-3/16 8 3200 44007306Z 7-1/4 6 5/8 6 3-3/4 7-1/4 1-3/16 8 2200 32007258Z 7-1/4 8 5/8 6 3-3/4 7-1/4 1-1/4 8 32008078Z 8-1/16 8 5/8 6-11/16 5-1/2 8-1/16 1-3/4 7-1/2 3300 48008010Z 205mm 10 14mm 170mm 140mm 8-5/16 1-1/2 9 33008858Z 225mm 8 14mm 196mm 140mm 9-1/8 1-1/2 9-1/4 3500908 9 8 5/8 7-1/2 6 11 1-3/8 12-1/2 3000 4900908A 9 8 5/8 7-3/4 5-1/8 11 1-3/8 12 3000 4900908S 9 8 5/8 7-1/2 6 9-1/8 1-3/8 9 3000 4900908AC 190mm 8 15mm 155mm 100mm 228mm 1 9 3000 49001058 10-1/2 8 3/4 8-3/4 5 12-1/2 1-3/4 22 4200 65001108 11 8 3/4 9-1/2 6 13-1/4 1-13/16 23-1/2 4200 65001108A 11 8 3/4 9 6 11-3/4 1-3/4 17-1/2 3000 49001308 13 8 7/8 11 7 14 2 18-1/2 4400 6700
*Outside diameter is machined at an angle, with the smaller side to the reverse gear to allow for clearance.
Elastomer, a stiff, yet resilient material, has excellent energyabsorbingproperties.Itwillremainitsdesigncharacteristicsovera long period of time and will return to original shape even afterbeingundercompression.Itwithstandsoil,sludge,saltwaterandatemperaturerangeof-65oto+225oF.Allmetalcomponentsandhardwareareplatedforcorrosionresistanceandlonglife.Model5756,7256,908,1058,1108,1308,8010,and8858maybeusedbetweenflangeswithaboltholesizelargerthantheboltsfurnishedwith The Drivesaver. Specify model number plus the suffix B.BushingtofittheflangewillbefurnishedwithTheDrivesaver.
BuShIng kItS
5756 5/8”to1/2”7256 3/4”to5/8”908 3/4”to5/8”908BB 7/8”to5/8”1058 1”to3/4”1108 1”to3/4”8010 18.3mmto14mm8858 17mmto14mm
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
355
Drivesaver™ Selection guide - By engine I
Model reduction ratio Drivesaver Model
AllisonM.M15L,M20L................................................................................. 7256MH................................................................................................... 908BHYH/HP7700(9.00)........................................................................... 908A
CApitol2HD-200,5HD-200......................................................................... 4756AHE10200,HE10250........................................................................ 5756AHE10700,HE10750.......................................................................... 7256HE11200,HE12400.......................................................................... 5756HE11700.......................................................................................... 7256HP500,HP6900................................................................................ 7256HY400,HY6900................................................................................ 7256HY22000,HY24000.......................................................................... 7256HY25000,HY28000.......................................................................... 7256M-105,M-125.................................................................................. 5756
CrusAder4500Series...................................................................................... 404A
HurtH/ZFHBW5,10,15,15V,18,20................................................................ 404AHBW30,35,50,100,125.................................................................. 404AHBW150,150A,150V,220................................................................. 404AHBW250........................................................................................... 404AHBW360,360A,400,450.................................................................... 504HBW600,630..................................................................................... 504HBW710,710A................................................................................. 5756HBW710........................................4.35....................................... 7256HSW150H,450D............................................................................... 404AHSW450A,450H............................................................................... 504HHSW630A,630D,630H....................................................................... 504HSW800A,800V,1250A.................................................................... 5756
newAgePRMDelta......................................................................................... 404APRM210/160...................................................................................... 504PRM60,PRM601,601A..................................................................... 7256PRM401,601,602.....................1.19,1.5,2,2.8.............................. 5756
pArAgonHB,HF,RO.......................................................................................... 404P13,P200,P300,PV300................................................................. 404ACRA,PV400........................................................................................... 454P400................................................................................................. 504APL,P15,PM,PMB........................................................................... 504ACRB...................................................................................................... 554RC.................................................................................................... 6256SAOD.................................................................................................. 303
sAABG,H..................................................................................................... 354HG,2HG,GG,2H,2GRG..................................................................... 404S
loHmAnn/stAlterGVV200A........................................................................................ 908AC
spiCer (callfordetails)1310/1350(U-Joint)................................................................MRD504PR
Model reduction ratio Drivesaver Model
twin disCMG502,502-1.................................................................................. 4756MG506,506-1,506A................1.1,1.5,2,2.5,3........................... 5756BMG506,506-1,506A....................... 4.0,4.5.................................. 7256BMG507-1,507-2,507A.................. 1.1,1.5,2................................ 5756BMG507A-1..................................... 1.1,1.5,2................................ 5756BMG507-1,507A.................................2.5,3.................................... 7256BMG509............................................1.5,2,3.................................. 7256BMG510,510A.............................. 1.5,2,2.5,3................................ 908BMG509,510................................... 4,4.5,5.1................................ 1058BMG516............................................................................................. 1108MG518-1DC................................................................................... 1108AMG527........................................ 2,2.9,3.8,5.............................. 1308BMG5050.5050A,5050V.................................................................. 5756BMG5050,5051A........................................................................... 5756ABMG5061,5061A,5061V........... 1.1,1.5,2,2.5,3.......................... 5756BMG5091SC..................................................................................... 7256BMG5101DC.................................... 4,4.5,5.1................................ 1058BMG5111DC,5114CHP....................4,4.5,5.1................................ 1058BMG5111(9’FLange)....................................................................... 908BBMG5111(10-1/2”Flange)............................................................... 1058BMG5111SC.................................. 1.5,2,2.5,3................................ 908BMG114A....................................................................................... 908SBB
universAlAtomic4............................................................................................. 353
volvoMB10A,MD7A,MD11C......................................................................404VMD38,MS2B,2000Series.................................................................404VMS3,MS4A......................................................................................... 504
wArner1004,1005,1013,1014..................................................................... 5041017,1018,2001,2002..................................................................... 50472C.................................................................................................... 5041006,1026,73C............................................................................... 575670C,71C.......................................................................................... 404A
YAnmAr20M,20H/G,GMSeries......................................................................424YKBW10,KM2Series...........................................................................424YKM3ASeries,YP-7M..........................................................................424Y30M,30H/G,KH18,KM4A..................................................................524YYP-10M.............................................................................................524Y
ZFIRM41A2,41A3,50A3......................................................................... 504IRM50A4,V2,V3................................................................................. 504IRM220,220A-1,225A..................................................................... 4756IRM301A-1,301P2-2...................................................................... 5756AIRM310............................................................................................7306ZIRM310A..........................................................................................7258ZIRM320........................................................................................... 1058BIRM320AL/LAV.............................................................................. 8858ZBIRM350............................................................................................8078ZIRM350AL/PL................................................................................ 8010ZB
ZF installations: Please check # of bolts & pilot configurations.
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
356
engine MountsI
Ever-Stay™ Engine MountsThe Ever-Stay™ engine mounts are cast molded from two hardnesses of elastomers. The softer inner core provides vibration, noise and shock dampening, while the stiff outer shell restricts engine movement. They are easy to install with a wide range of sizes to fit almost every engine requirement.
Enduro-Mount™ Engine MountsTheEnduro-Mount™enginemountsarecastmoldedfromtwohardnessesofelastomers.Thesofterinnercoreprovidesvibration,noiseandshockdampening,whilethestiffoutershellrestrictsenginemovement.Theyareeasytoinstallandwillhaveawiderangeofsizestofitalmosteveryenginerequirement.
Alignment WedgesDesignedspecificallyforusewithGlobeenginemounts,thesewedgesallowenginealignmenttomicrometertolerances.Ratedloadis1500lbs.(50lbspersquareinchareaandthereforemayusedinpairsasvibrationdampeningpads.Thesewedgesaremaintainedfreeandalsoimpervioustogas,oil,greasesludgeandsaltwater.
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
357
Standard Brass Sleeve Series I
PART CODE UNIT SHAFT OUTSIDE LENGTH METAL
NO. NAME WT. DIA. (A) DIA. (B) INCH (C) WALL (D)
E00100 ALBACORE 0.50 3/4 1-1/4 3 1/8E00200 BLENNY 0.31 7/8 1-1/4 3-1/2 1/16E00300 BARRACUDA 0.69 7/8 1-3/8 3-1/2 1/8E00400 BASS 0.75 7/8 1-1/2 3-1/2 1/8E00500 BETTA 0.13 1 1-1/4 3 1/32E00600 BLACKFISH 0.31 1 1-1/4 4 1/32E00700 BLOATER 0.38 1 1-3/8 4 1/16E00800 BONITO 0.81 1 1-1/2 4 1/8E00900 BROADBILL 0.88 1 1-5/8 4 1/8
E01000 BULLHEAD 1.25 1 2 4 1/8E01100 CAMA 0.50 1-1/8 1-1/2 4-1/2 1/16E00650 CARIBE 0.47 1 1-1/4 6 1/32E01200 CARP 1.00 1-1/8 1-5/8 4-1/2 1/8E01300 CATFISH 1.19 1-1/8 1-3/4 4-1/2 1/8E01400 CHOBIE 1.38 1-1/8 2 4-1/2 1/8E01500 CHOGSET 0.50 1-1/4 1-1/2 5 1/8E01600 CHUB 1.13 1-1/4 1-3/4 5 1/8E01700 COD 1.50 1-1/4 2 5 1/8
E01800 CROAKER 1.75 1-1/4 2-1/8 5 1/8E01900 DEVILFISH 1.44 1-3/8 1-7/8 5-1/2 1/8E02000 DOGFISH 1.69 1-3/8 2 5-1/2 1/8E02100 DOLPHIN 1.75 1-3/8 2-1/8 5-1/2 1/8E02200 EEL 2.13 1-3/8 2-3/8 5-1/2 1/8E02300 FLAMEN 1.13 1-1/2 2 4-3/8 1/8E02400 FLATFISH 1.63 1-1/2 2 6 1/8E02500 FLOUNDER 2.19 1-1/2 2-3/8 6 1/8E02600 GAR 1.88 1-5/8 2-1/8 6-1/2 1/8
E02700 GRAYBACK 2.75 1-5/8 2-5/8 6-1/2 1/8E02800 GROUPER 2.38 1-3/4 2-3/8 7 1/8E02900 HADDO 2.81 1-3/4 2-5/8 7 1/8E03000 HAKE 3.00 1-7/8 2-5/8 7-1/2 1/8E03100 HALIBUT 3.69 1-7/8 2-15/16 7-1/2 1/8E03200 HERRING 3.06 2 2-5/8 8 1/8E03300 KINGFISH 3.88 2 3 8 1/8E03350 LAMPREY 4.85 2 3 10 1/8E03400 MACKEREL 3.69 2-1/8 2-15/16 8-1/2 1/8
E03500 MANTA 4.50 2-1/8 3-1/8 8-1/2 1/8E03650 MARGATE 4.90 2-1/4 3 9 1/8E03600 MARLIN 3.94 2-1/4 2-15/16 9 1/8E03700 MINNOW 4.44 2-1/4 3-1/8 9 1/8E03800 MUDFISH 5.44 2-1/4 3-3/8 9 1/8E03900 MULLET 5.44 2-3/8 3-3/8 9-1/2 1/8E04000 MUSKY 4.63 2-1/2 3-1/8 10 1/8E04100 PERCH 5.50 2-1/2 3-3/8 10 1/8E04200 PICKEREL 5.75 2-5/8 3-3/8 10-1/2 1/8
E04300 PICUDA 5.63 2-3/4 3-3/8 11 1/8E04150 PIKE 6.47 2-1/2 3-1/2 10 1/8E04400 PINFISH 6.88 2-3/4 3-3/4 11 1/8E04500 PORGY 7.13 2-7/8 3-3/4 11-1/2 1/8E04600 RAY 7.06 3 3-3/4 12 1/8E04700 REDFIN 7.94 3 4 12 1/8E04800 REDFISH 9.25 3-1/8 4-1/4 12-1/2 1/8E04900 ROCKFISH 8.13 3-1/4 4 13 1/8E05000 SAILFISH 9.38 3-1/4 4-1/4 13 1/8
E05100 SALMON 10.63 3-3/8 4-1/2 13-1/2 1/8E05200 SANDFISH 9.56 3-1/2 4-1/4 14 1/8E05300 SAWFISH 10.25 3-1/2 4-1/2 14 1/8E05400 SCULPIN 10.81 3-5/8 4-1/2 14-1/2 1/8
All materials meet U.S. Navy specification E05500 SHAD 11.00 3-3/4 4-1/2 15 1/8 MIL-B-17901B(SH) Class I E05600 SHARK 17.56 3-3/4 5 15 3/16
E05700 SILVERFISH 18.19 3-3/4 5-1/4 15 3/16E05800 SMELT 20.00 3-7/8 5-1/4 15-1/2 3/16E05900 SNAPPER 18.25 4 5 16 3/16
E06000 SOCKEYE 19.63 4 5-1/4 16 3/16E06100 SPEARFISH 20.06 4-1/8 5-1/4 16-1/2 3/16E06200 SQUIT 22.00 4-1/4 5-1/2 17 3/16E06300 STREAKER 24.31 4-3/8 5-3/4 17-1/2 3/16E06400 SUCKER 22.00 4-1/2 5-1/2 18 3/16E06500 SUNFISH 24.63 4-1/2 5-3/4 18 3/16E06600 SWORDFISH 34.00 4-5/8 6-1/8 18-1/2 1/4E06700 TARPON 34.00 4-3/4 6-1/8 19 1/4E06800 TROUT 33.00 4-7/8 6-1/8 19-1/2 1/4
E06900 WAHOO 35.00 5 6-1/8 20 1/4E07000 WALLEYE 39.00 5 6-1/2 20 1/4E07100 WANDTAIL 44.00 5-1/4 6-3/4 21 1/4E07200 WAP 48.00 5-1/4 7 21 1/4E07300 WARFISH 57.00 5-3/8 6-3/4 21-1/2 1/4E07400 WARSAW 62.00 5-3/8 7 21-1/2 1/4E07500 WHITEFISH 59.00 5-1/2 7 22 1/4E07600 WINDFISH 44.50 5-5/8 7 22-1/2 1/4E07700 YELLOWTAIL 48.00 5-3/4 7 23 1/4
E07800 YOWLING 52.00 5-7/8 7-1/2 24 1/4E07900 ZANCLUS 55.00 6 7-1/2 24 1/4
STANDARD BRASS SLEEVE SERIES
Morse Rubber LLC3588 Main Street
Keokuk, IA 52632 USAPh. (319) 524-8430Fax (319) 524-7290
Toll Free (USA & Can)800-553-7036
Rubber
A
D
Shaft Dia.
B
C
NavalBrass
Marine Bearings
unit ShaFt outSiDe length ShellPart # CoDe naMe Wt. Dia (a) Dia (B) inCh (C) Wall (D)
E00100 ALBACORE 0.50 3/4 1-1/4 3 1/8E00200 BLENNY 0.31 7/8 1-1/4 3-1/2 1/16E00300 BARRACUDA 0.69 7/8 1-3/8 3-1/2 1/8E00400 BASS 0.75 7/8 1-1/2 3-1/2 1/8E00500 BETTA 0.13 1 1-1/4 3 1/32E00600 BLACKFISH 0.31 1 1-1/4 4 1/32E00700 BLOATER 0.38 1 1-3/8 4 1/16E00800 BONITO 0.81 1 1-1/2 4 1/8E00900 BROADBILL 0.88 1 1-5/8 4 1/8E01000 BULLHEAD 1.25 1 2 4 1/8E01100 CAMA 0.50 1-1/8 1-1/2 4-1/2 1/16E00650 CARIBE 0.47 1 1-1/4 6 1/32E01200 CARP 1.00 1-1/8 1-5/8 4-1/2 1/8E01300 CATFISH 1.19 1-1/8 1-3/4 4-1/2 1/8E01400 CHOBIE 1.38 1-1/8 2 4-1/2 1/8E01500 CHOGSET 0.50 1-1/4 1-1/2 5 1/8E01600 CHUB 1.13 1-1/4 1-3/4 5 1/8E01700 COD 1.50 1-1/4 2 5 1/8E01800 CROAKER 1.75 1-1/4 2-1/8 5 1/8E01900 DEVILFISH 1.44 1-3/8 1-7/8 5-1/2 1/8E02000 DOGFISH 1.69 1-3/8 2 5-1/2 1/8E02100 DOLPHIN 1.75 1-3/8 2-1/8 5-1/2 1/8E02200 EEL 2.13 1-3/8 2-3/8 5-1/2 1/8E02300 FLAMEN 1.13 1-1/2 2 4-3/8 1/8E02400 FLATFISH 1.63 1-1/2 2 6 1/8E02500 FLOUNDER 2.19 1-1/2 2-3/8 6 1/8E02600 GAR 1.88 1-5/8 2-1/8 6-1/2 1/8E02700 GRAYBACK 2.75 1-5/8 2-5/8 6-1/2 1/8E02800 GROUPER 2.38 1-3/4 2-3/8 7 1/8E02900 HADDO 2.81 1-3/4 2-5/8 7 1/8E03000 HAKE 3.00 1-7/8 2-5/8 7-1/2 1/8E03100 HALIBUT 3.69 1-7/8 2-15/16 7-1/2 1/8E03200 HERRING 3.06 2 2-5/8 8 1/8E03300 KINGFISH 3.88 2 3 8 1/8E03350 LAMPREY 4.85 2 3 10 1/8E03400 MACKEREL 3.69 2-1/8 2-15/16 8-1/2 1/8E03500 MANTA 4.50 2-1/8 3-1/8 8-1/2 1/8E03650 MARGATE 4.90 2-1/4 3 9 1/8E03600 MARLIN 3.94 2-1/4 2-15/16 9 1/8E03700 MINNOW 4.44 2-1/4 3-1/8 9 1/8E03800 MUDFISH 5.44 2-1/4 3-3/8 9 1/8E03900 MULLET 5.44 2-3/8 3-3/8 9-1/2 1/8E04000 MUSKY 4.63 2-1/2 3-1/8 10 1/8E04100 PERCH 5.50 2-1/2 3-3/8 10 1/8E04200 PICKEREL 5.75 2-5/8 3-3/8 10-1/2 1/8E04300 PICUDA 5.63 2-3/4 3-3/8 11 1/8E04150 PIKE 6.47 2-1/2 3-1/2 10 1/8E04400 PINFISH 6.88 2-3/4 3-3/4 11 1/8E04500 PORGY 7.13 2-7/8 3-3/4 11-1/2 1/8E04600 RAY 7.06 3 3-3/4 12 1/8E04700 REDFIN 7.94 3 4 12 1/8E04800 REDFISH 9.25 3-1/8 4-1/4 12-1/2 1/8E04900 ROCKFISH 8.13 3-1/4 4 13 1/8E05000 SAILFISH 9.38 3-1/4 4-1/4 13 1/8E05100 SALMON 10.63 3-3/8 4-1/2 13-1/2 1/8E05200 SANDFISH 9.56 3-1/2 4-1/4 14 1/8E05300 SAWFISH 10.25 3-1/2 4-1/2 14 1/8
unit ShaFt outSiDe length ShellPart # CoDe naMe Wt. Dia (a) Dia (B) inCh (C) Wall (D)
E05400 SCULPIN 10.81 3-5/8 4-1/2 14-1/2 1/8E05500 SHAD 11.00 3-3/4 4-1/2 15 1/8E05600 SHARK 17.56 3-3/4 5 15 3/16E05700 SILVERFISH 18.19 3-3/4 5-1/4 15 3/16E05800 SMELT 20.00 3-7/8 5-1/4 15-1/2 3/16E05900 SNAPPER 18.25 4 5 16 3/16E06000 SOCKEYE 19.63 4 5-1/4 16 3/16E06100 SPEARFISH 20.06 4-1/8 5-1/4 16-1/2 3/16E06200 SQUIT 22.00 4-1/4 5-1/2 17 3/16E06300 STREAKER 24.31 4-3/8 5-3/4 17-1/2 3/16E06400 SUCKER 22.00 4-1/2 5-1/2 18 3/16E06500 SUNFISH 24.63 4-1/2 5-3/4 18 3/16E06600 SWORDFISH 34.00 4-5/8 6-1/8 18-1/2 1/4E06700 TARPON 34.00 4-3/4 6-1/8 19 1/4E06800 TROUT 33.00 4-7/8 6-1/8 19-1/2 1/4E06900 WAHOO 35.00 5 6-1/8 20 1/4E07000 WALLEYE 39.00 5 6-1/2 20 1/4E07100 WANDTAIL 44.00 5-1/4 6-3/4 21 1/4E07200 WAP 48.00 5-1/4 7 21 1/4E07300 WARFISH 57.00 5-3/8 6-3/4 21-1/2 1/4E07400 WARSAW 62.00 5-3/8 7 21-1/2 1/4E07500 WHITEFISH 59.00 5-1/2 7 22 1/4E07600 WINDFISH 44.50 5-5/8 7 22-1/2 1/4E07700 YELLOWTAIL 48.00 5-3/4 7 23 1/4E07800 YOWLING 52.00 5-7/8 7-1/2 24 1/4E07900 ZANCLUS 55.00 6 7-1/2 24 1/4
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
358
Standard non-Metallic SeriesI
unit ShaFt outSiDe length ShellPart # CoDe naMe Wt. Dia (a) Dia (B) inCh (C) Wall (D)
EF0100 ADDER 0.13 3/4 1-1/4 3 1/8EF0200 AGII 0.19 7/8 1-3/8 3-1/2 1/8EF0300 ANCHOVY 0.19 7/8 1-1/2 3-1/2 1/8EF0350 ANABLEPS 0.15 1 1-1/4 4 1/32EF0375 ARROWANA 0.17 1 1-3/8 4 1/16EF0400 ANGEL 0.19 1 1-1/2 4 1/8EF0500 BARBEL 0.25 1 1-5/8 4 1/8EF0600 BILLFISH 0.50 1 2 4 1/8EF0650 BLOODFIN 0.40 1-1/8 1-1/2 4-1/2 1/16EF0700 BLUEFISH 0.25 1-1/8 1-5/8 4-1/2 1/8EF0800 BONE 0.31 1-1/8 1-3/4 4-1/2 1/8EF0900 BREAM 0.44 1-1/8 2 4-1/2 1/8EF0950 BRICHARDI 0.46 1-1/4 1-1/2 5 1/32EF1000 BRILL 0.25 1-1/4 1-3/4 5 1/8EF1100 BURBOT 0.50 1-1/4 2 5 1/8EF1200 CAPELIN 0.63 1-1/4 2-1/8 5 1/8EF1300 CHIRUS 0.44 1-3/8 1-7/8 5-1/2 1/8EF1400 CISCOES 0.50 1-3/8 2 5-1/2 1/8EF1500 COAL 0.63 1-3/8 2-1/8 5-1/2 1/8EF1600 CONEY 0.81 1-3/8 2-3/8 5-1/2 1/8EF1700 CORBINA 0.50 1-1/2 2 6 1/8EF1800 CRAIG 0.50 1-1/2 2-3/8 6 1/8EF1900 CRAMP 0.50 1-5/8 2-1/8 6-1/2 1/8EF2000 DIDON 1.13 1-5/8 2-5/8 6-1/2 1/8EF2100 DORADE 0.81 1-3/4 2-3/8 7 1/8EF2200 GERRES 1.00 1-3/4 2-5/8 7 1/8EF2300 GILTHEAD 1.00 1-7/8 2-5/8 7-1/2 1/8EF2400 GLOBE 1.50 1-7/8 2-15/16 7-1/2 1/8EF2500 GOBIE 0.94 2 2-5/8 8 1/8EF2600 GUPPY 1.56 2 3 8 1/8EF2700 HADDOCK 1.31 2-1/8 2-15/16 8-1/2 1/8EF2800 HAYHO 1.88 2-1/8 3-1/8 8-1/2 1/8EF2900 HOLIA 1.38 2-1/4 2-15/16 9 1/8EF3000 HOOPID 1.81 2-1/4 3-1/8 9 1/8EF3100 HORNED 2.19 2-1/4 3-3/8 9 1/8EF3200 JUREL 2.13 2-3/8 3-3/8 9-1/2 1/8EF3300 LAUNCE 1.44 2-1/2 3-1/8 10 1/8EF3400 LOACH 1.75 2-1/2 3-3/8 10 1/8EF3500 LUMP 1.81 2-5/8 3-3/8 10-1/2 1/8EF3600 MIDGE 1.75 2-3/4 3-3/8 11 1/8EF3700 MONDA 2.63 2-3/4 3-3/4 11 1/8EF3800 MORAY 2.56 2-7/8 3-3/4 11-1/2 1/8EF3900 NUMB 2.38 3 3-3/4 12 1/8EF4000 OARFISH 3.00 3 4 12 1/8EF4100 OX 3.75 3-1/8 4-1/4 12-1/2 1/8EF4200 ONO 2.75 3-1/4 4 13 1/8EF4300 PADDLE 3.50 3-1/4 4-1/4 13 1/8EF4400 PIPE 4.13 3-3/8 4-1/2 13-1/2 1/8EF4500 PLAICE 3.88 3-1/2 4-1/4 14 1/8EF4600 PILOT 4.00 3-1/2 4-1/2 14 1/8EF4700 PIPER 3.50 3-5/8 4-1/2 14-1/2 1/8EF4800 SPRAT 3.13 3-3/4 4-1/2 15 1/8EF4900 SALTIE 5.81 3-3/4 5 15 3/16EF5000 SOLE 7.13 3-3/4 5-1/4 15 3/16EF5100 SARDINE 6.38 3-7/8 5-1/4 15-1/2 3/16
unit ShaFt outSiDe length ShellPart # CoDe naMe Wt. Dia (a) Dia (B) inCh (C) Wall (D)
EF5200 SKATE 4.75 4 5 16 3/16EF5300 SKITTLE 6.38 4 5-1/4 16 3/16EF5400 STAR 5.63 4-1/8 5-1/4 16-1/2 3/16EF5500 SAND 7.13 4-1/4 5-1/2 17 3/16EF5600 SPOTTED 8.81 4-3/8 5-3/4 17-1/2 3/16EF5700 STING 6.13 4-1/2 5-1/2 18 3/16EF5800 STRUGEON 8.13 4-1/2 5-3/4 18 3/16EF5900 STERLET 10.50 4-5/8 6-1/8 18-1/2 1/4EF6000 SEA 10.00 4-3/4 6-1/8 19 1/4EF6100 SCALD 9.31 4-7/8 6-1/8 19-1/2 1/4EF6200 SCARINA 8.50 5 6-1/8 20 1/4EF6300 SCOMBER 12.25 5 6-1/2 20 1/4EF6400 SEACAL 13.25 5-1/4 6-3/4 21 1/4EF6500 SHANNY 15.75 5-1/4 7 21 1/4EF6600 SKIPJACK 12.00 5-3/8 6-3/4 21-1/2 1/4EF6700 SCAD 14.00 5-3/8 7 21-1/2 1/4EF6800 TUNNY 13.50 5-1/2 7 22 1/4EF6900 SKIPPY 12.63 5-5/8 7 22-1/2 1/4EF7000 SNOOK 12.25 5-3/4 7 23 1/4EF7100 SPINOUS 18.00 5-7/8 7-1/2 24 1/4EF7200 SERRONO 16.00 6 7-1/2 24 1/4
PART CODE UNIT SHAFT OUTSIDE LENGTH SHELLNO. NAME WT. DIA. (A) DIA. (B) INCH (C) WALL (D)
EF0100 ADDER 0.13 3/4 1-1/4 3 1/8
EF0200 AGII 0.19 7/8 1-3/8 3-1/2 1/8EF0300 ANCHOVY 0.19 7/8 1-1/2 3-1/2 1/8EF0350 ANABLEPS 0.15 1 1-1/4 4 1/32EF0375 ARROWANA 0.17 1 1-3/8 4 1/16EF0400 ANGEL 0.19 1 1-1/2 4 1/8EF0500 BARBEL 0.25 1 1-5/8 4 1/8EF0600 BILLFISH 0.50 1 2 4 1/8EF0650 BLOODFIN 0.40 1-1/8 1-1/2 4-1/2 1/16
EF0700 BLUEFISH 0.25 1-1/8 1-5/8 4-1/2 1/8EF0800 BONE 0.31 1-1/8 1-3/4 4-1/2 1/8EF0900 BREAM 0.44 1-1/8 2 4-1/2 1/8EF0950 BRICHARDI 0.46 1-1/4 1-1/2 5 1/32EF1000 BRILL 0.25 1-1/4 1-3/4 5 1/8EF1100 BURBOT 0.50 1-1/4 2 5 1/8EF1200 CAPELIN 0.63 1-1/4 2-1/8 5 1/8EF1300 CHIRUS 0.44 1-3/8 1-7/8 5-1/2 1/8EF1400 CISCOES 0.50 1-3/8 2 5-1/2 1/8
EF1500 COAL 0.63 1-3/8 2-1/8 5-1/2 1/8EF1600 CONEY 0.81 1-3/8 2-3/8 5-1/2 1/8EF1700 CORBINA 0.50 1-1/2 2 6 1/8EF1800 CRAIG 0.50 1-1/2 2-3/8 6 1/8EF1900 CRAMP 0.50 1-5/8 2-1/8 6-1/2 1/8EF2000 DIDON 1.13 1-5/8 2-5/8 6-1/2 1/8EF2100 DORADE 0.81 1-3/4 2-3/8 7 1/8EF2200 GERRES 1.00 1-3/4 2-5/8 7 1/8EF2300 GILTHEAD 1.00 1-7/8 2-5/8 7-1/2 1/8
EF2400 GLOBE 1.50 1-7/8 2-15/16 7-1/2 1/8EF2500 GOBIE 0.94 2 2-5/8 8 1/8EF2600 GUPPY 1.56 2 3 8 1/8EF2700 HADDOCK 1.31 2-1/8 2-15/16 8-1/2 1/8EF2800 HAYHO 1.88 2-1/8 3-1/8 8-1/2 1/8EF2900 HOLIA 1.38 2-1/4 2-15/16 9 1/8EF3000 HOOPID 1.81 2-1/4 3-1/8 9 1/8EF3100 HORNED 2.19 2-1/4 3-3/8 9 1/8EF3200 JUREL 2.13 2-3/8 3-3/8 9-1/2 1/8
EF3300 LAUNCE 1.44 2-1/2 3-1/8 10 1/8EF3400 LOACH 1.75 2-1/2 3-3/8 10 1/8EF3500 LUMP 1.81 2-5/8 3-3/8 10-1/2 1/8EF3600 MIDGE 1.75 2-3/4 3-3/8 11 1/8EF3700 MONDA 2.63 2-3/4 3-3/4 11 1/8EF3800 MORAY 2.56 2-7/8 3-3/4 11-1/2 1/8EF3900 NUMB 2.38 3 3-3/4 12 1/8EF4000 OARFISH 3.00 3 4 12 1/8EF4100 OX 3.75 3-1/8 4-1/4 12-1/2 1/8
EF4200 ONO 2.75 3-1/4 4 13 1/8EF4300 PADDLE 3.50 3-1/4 4-1/4 13 1/8EF4400 PIPE 4.13 3-3/8 4-1/2 13-1/2 1/8EF4500 PLAICE 3.88 3-1/2 4-1/4 14 1/8EF4600 PILOT 4.00 3-1/2 4-1/2 14 1/8EF4700 PIPER 3.50 3-5/8 4-1/2 14-1/2 1/8EF4800 SPRAT 3.13 3-3/4 4-1/2 15 1/8EF4900 SALTIE 5.81 3-3/4 5 15 3/16EF5000 SOLE 7.13 3-3/4 5-1/4 15 3/16
EF5100 SARDINE 6.38 3-7/8 5-1/4 15-1/2 3/16EF5200 SKATE 4.75 4 5 16 3/16EF5300 SKITTLE 6.38 4 5-1/4 16 3/16EF5400 STAR 5.63 4-1/8 5-1/4 16-1/2 3/16EF5500 SAND 7.13 4-1/4 5-1/2 17 3/16EF5600 SPOTTED 8.81 4-3/8 5-3/4 17-1/2 3/16EF5700 STING 6.13 4-1/2 5-1/2 18 3/16EF5800 STRUGEON 8.13 4-1/2 5-3/4 18 3/16EF5900 STERLET 10.50 4-5/8 6-1/8 18-1/2 1/4
EF6000 SEA 10.00 4-3/4 6-1/8 19 1/4EF6100 SCALD 9.31 4-7/8 6-1/8 19-1/2 1/4EF6200 SCARINA 8.50 5 6-1/8 20 1/4EF6300 SCOMBER 12.25 5 6-1/2 20 1/4EF6400 SEACAL 13.25 5-1/4 6-3/4 21 1/4EF6500 SHANNY 15.75 5-1/4 7 21 1/4EF6600 SKIPJACK 12.00 5-3/8 6-3/4 21-1/2 1/4EF6700 SCAD 14.00 5-3/8 7 21-1/2 1/4EF6800 TUNNY 13.50 5-1/2 7 22 1/4
EF6900 SKIPPY 12.63 5-5/8 7 22-1/2 1/4EF7000 SNOOK 12.25 5-3/4 7 23 1/4EF7100 SPINOUS 18.00 5-7/8 7-1/2 24 1/4EF7200 SERRONO 16.00 6 7-1/2 24 1/4
STANDARD NON-METALLIC SERIES
�
�
Morse Rubber LLC3588 Main Street
Keokuk, IA 52632 USAPh. (319) 524-8430Fax (319) 524-7290
Toll Free (USA & Can)800-553-7036
�
MARINE BEARINGS
Rubber
A
D
Shaft Dia.
B
C
Non-MetallicShell
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
359
Brass flanged Series I
unit Wt ShaFt outSiDe length Met Wall FlangePart # CoDe naMe lBS. Dia (a) Dia (B) inCh (C) (g) (D x e)
E20100 Abalone 29 3” 4-1/4” 12” 1/2” 6-3/4x1/2E20200 Barnacle 30 3-1/4” 4-1/2” 13” 1/2” 7x1/2E20300 Crab 38 3-1/2” 4-7/8” 14” 1/2” 7-3/8X1/2E20400 Crawfish 45 3-3/4” 5-1/4” 15” 1/2” 7-3/4x1/2E20500 Lobster 50 4” 5-1/2” 16” 1/2” 8x1/2E20600 Mussel 55 4-1/4” 5-3/4” 17” 1/2” 8-1/4x1/2E20700 Nautilus 63 4-1/2” 6” 18” 1/2” 8-7/8x1/2E20800 Octopus 66 4-3/4” 6-1/4” 19” 1/2” 9-1/8x1/2E20900 Oyster 81 5” 6-3/4” 20” 9/16” 9-5/8x9/16E21000 Prawn 88 5-1/4” 6-7/8” 21” 9/16” 9-7/8x9/16E21100 Scallop 95 5-1/2” 7-1/4” 22” 9/16” 10-1/4x9/16E21200 Seahorse 98 5-3/4” 7-1/4” 23” 9/19” 10-1/4x9/16E21300 Shrimp 109 6” 7-3/4” 24” 9/16” 11x9/16E21400 Bark 101 6-1/4” 8” 22-1/2” 9/16” 10-5/8x9/16E21500 Brig 125 6-1/2” 8-3/8” 23-1/2” 9/16” 11x9/16E21600 Canoe 135 6-3/4” 8-3/4” 24-1/2” 9/16” 11-3/8x9/16E21700 Caravel 142 7” 9” 25-1/2” 9/16” 11-5/8x9/16E21800 Clipper 150 7-1/4” 9-1/4” 26-1/2” 9/16” 11-7/8x9/16E21900 Corsair 168 7-1/2” 9-5/8” 27-1/2” 9/16” 12-1/4x9/16E22000 Corvette 187 7-3/4” 9-7/8” 28-1/2” 9/16” 12-1/2x9/16E22100 Cutter 200 8” 10-1/4” 29-1/2” 5/8” 13-1/4x5/8E22200 Cutterine 232 8” 10-1/2” 29-1/2” 5/8” 13-1/4x5/8E22300 Dogger 230 8-1/4” 10-1/2” 30-1/2” 5/8” 13-1/2x5/8E22400 Frigate 235 8-1/2” 10-3/4” 31-1/2” 5/8” 13-3/5x5/8E22500 Galleon 240 8-3/4” 11” 32-1/2” 5/8” 14x5/8E22600 Gondola 255 9” 11-1/4” 33-1/2” 3/4” 14-1/4x3/4E22700 Ketch 275 9-1/4” 11-1/2” 34-1/2” 3/4” 14-5/8x3/4E22800 Outrigger 278 9-1/2” 11-3/4” 35-1/2” 3/4” 14-7/8x3/4E22900 Sampan 350 9-3/4” 12-1/8” 36-1/2” 3/4” 15-1/4x3/4E23000 Schooner 355 10” 12-3/8” 37-1/2” 3/4” 15-1/2x3/4E23100 Scooter 360 10-1/4” 12-5/8” 38-1/2” 3/4” 15-7/8x3/4E23200 Shallop 365 10-1/2” 12-7/8” 39-1/2” 3/4” 16-1/8x3/4E23300 Sloop 385 10-3/4” 13-1/8” 40-1/2” 3/4” 16-3/8x3/4E23400 Smack 438 11” 13-1/2” 41-1/2” 3/4” 17-1/4x3/4E23500 Snow 432 11-1/4” 13-3/4” 42-1/2” 3/4” 17-1/2x3/4E23600 Tartan 496 11-1/2” 14-1/8” 43-1/2” 3/4” 17-7/8x3/4E23700 Yacht 486 11-3/4” 14-3/8” 44-1/2” 3/4” 18-1/8x3/4E23800 Yawl 529 12” 14-3/4” 45-1/2” 3/4” 18-1/2x3/4
Part Code Unit Wt. Shaft Dia. O.D. Length Met. Wall FlangeNumber Name Lbs. A B C G D x EE20100 Abalone 29 3" 4-1/4" 12" 1/2" 6-3/4x1/2E20200 Barnacle 30 3-1/4" 4-1/2" 13" 1/2" 7x1/2E20300 Crab 38 3-1/2" 4-7/8" 14" 1/2" 7-3/8X1/2E20400 Crawfish 45 3-3/4" 5-1/4" 15" 1/2" 7-3/4x1/2E20500 Lobster 50 4" 5-1/2" 16" 1/2" 8x1/2E20600 Mussel 55 4-1/4" 5-3/4" 17" 1/2" 8-1/4x1/2E20700 Nautilus 63 4-1/2" 6" 18" 1/2" 8-7/8x1/2E20800 Octopus 66 4-3/4" 6-1/4" 19" 1/2" 9-1/8x1/2E20900 Oyster 81 5" 6-3/4" 20" 9/16" 9-5/8x9/16E21000 Prawn 88 5-1/4" 6-7/8" 21" 9/16" 9-7/8x9/16E21100 Scallop 95 5-1/2" 7-1/4" 22" 9/16" 10-1/4x9/16 E21200 Seahorse 98 5-3/4" 7-1/4" 23" 9/19" 10-1/4x9/16 E21300 Shrimp 109 6" 7-3/4" 24" 9/16" 11x9/16E21400 Bark 101 6-1/4" 8" 22-1/2" 9/16" 10-5/8x9/16E21500 Brig 125 6-1/2" 8-3/8" 23-1/2" 9/16" 11x9/16E21600 Canoe 135 6-3/4" 8-3/4" 24-1/2" 9/16" 11-3/8x9/16E21700 Caravel 142 7" 9" 25-1/2" 9/16" 11-5/8x9/16E21800 Clipper 150 7-1/4" 9-1/4" 26-1/2" 9/16" 11-7/8x9/16E21900 Corsair 168 7-1/2" 9-5/8" 27-1/2" 9/16" 12-1/4x9/16E22000 Corvette 187 7-3/4" 9-7/8" 28-1/2" 9/16" 12-1/2x9/16E22100 Cutter 200 8" 10-1/4" 29-1/2" 5/8" 13-1/4x5/8E22200 Cutterine 232 8" 10-1/2" 29-1/2" 5/8" 13-1/4x5/8E22300 Dogger 230 8-1/4" 10-1/2" 30-1/2" 5/8" 13-1/2x5/8E22400 Frigate 235 8-1/2" 10-3/4" 31-1/2" 5/8" 13-3/5x5/8E22500 Galleon 240 8-3/4" 11" 32-1/2" 5/8" 14x5/8E22600 Gondola 255 9" 11-1/4" 33-1/2" 3/4" 14-1/4x3/4E22700 Ketch 275 9-1/4" 11-1/2" 34-1/2" 3/4" 14-5/8x3/4E22800 Outrigger 278 9-1/2" 11-3/4" 35-1/2" 3/4" 14-7/8x3/4E22900 Sampan 350 9-3/4" 12-1/8" 36-1/2" 3/4" 15-1/4x3/4E23000 Schooner 355 10" 12-3/8" 37-1/2" 3/4" 15-1/2x3/4E23100 Scooter 360 10-1/4" 12-5/8" 38-1/2" 3/4" 15-7/8x3/4E23200 Shallop 365 10-1/2" 12-7/8" 39-1/2" 3/4" 16-1/8x3/4E23300 Sloop 385 10-3/4" 13-1/8" 40-1/2" 3/4" 16-3/8x3/4E23400 Smack 438 11" 13-1/2" 41-1/2" 3/4" 17-1/4x3/4E23500 Snow 432 11-1/4" 13-3/4" 42-1/2" 3/4" 17-1/2x3/4E23600 Tartan 496 11-1/2" 14-1/8" 43-1/2" 3/4" 17-7/8x3/4E23700 Yacht 486 11-3/4" 14-3/8" 44-1/2" 3/4" 18-1/8x3/4E23800 Yawl 529 12" 14-3/4" 45-1/2" 3/4" 18-1/2x3/4All materials meet U.S. Navy Specification MIL-B17901B(SH) Class II All materials meet U.S. Navy Specification MIL-B-17901B(SH) Class II
Morse Marine BearingsMorse Rubber LLCTel: 319 524 8430 Fax: 319 524 7290
Part Code Unit Wt. Shaft Dia. O.D. Length Met. Wall FlangeNumber Name Lbs. A B C G D x EE23900 Yanqui 545 12-1/4" 15" 46-1/2" 5/8" 18-3/4X3/4E24000 Yapok 545 12-1/2" 15-1/4" 47-1/2" 5/8" 19X3/4
Rubber
Naval Brass
C
E
D
A
G
B
Standard Brass Flanged Marine Bearings
BRASS FLANGED SERIES
Marine Bearings
More on next page
AllmaterialsmeetU.S.NavySpecificationMIL-B17901B(SH)ClassII
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
360
Brass flanged Series ContinuedI
unit Wt ShaFt outSiDe length Met Wall FlangePart # CoDe naMe lBS. Dia (a) Dia (B) inCh (C) (g) (D x e)
E23900 Yanqui 545 12-1/4” 15” 46-1/2” 5/8” 18-3/4X3/4
E24000 Yapok 545 12-1/2” 15-1/4” 47-1/2” 5/8” 19X3/4
E24100 Yarborough 550 12-3/4” 15-/12” 48-1/2” 5/8” 19-1/4X3/4
E24200 Yataghan 563 13” 15-7/8” 50” 11/16” 19-5/8X7/8
E24300 Yoeman 610 13-1/4” 16-1/8” 51” 11/16” 19-7/8X7/8
E24400 York 640 13-1/2” 16-3/8” 52” 11/16” 20-1/8X7/8
E24500 Zephyr 650 13-3/4” 16-5/8” 53” 11/16” 20-3/8X7/8
E24600 Zeppelin 675 14” 16-7/8” 54” 11/16” 20-5/8X7/8
E24700 Zeppo 701 14-1/4” 17-1/8” 55” 11/16” 20-7/8X7/8
E24800 Zircon 754 14-1/2” 17-1/2” 56” 3/4” 21-1/4X7/8
E24900 Zodiac 775 14-3/4” 17-3/4” 57” 3/4” 21-1/2X7/8
E25000 Zulu 795 15” 18” 58” 3/4” 21-3/4X7/8
E24100 Yarborough 550 12-3/4" 15-/12" 48-1/2" 5/8" 19-1/4X3/4E24200 Yataghan 563 13" 15-7/8" 50" 11/16" 19-5/8X7/8E24300 Yoeman 610 13-1/4" 16-1/8" 51" 11/16" 19-7/8X7/8E24400 York 640 13-1/2" 16-3/8" 52" 11/16" 20-1/8X7/8E24500 Zephyr 650 13-3/4" 16-5/8" 53" 11/16" 20-3/8X7/8E24600 Zeppelin 675 14" 16-7/8" 54" 11/16" 20-5/8X7/8E24700 Zeppo 701 14-1/4" 17-1/8" 55" 11/16" 20-7/8X7/8E24800 Zircon 754 14-1/2" 17-1/2" 56" 3/4" 21-1/4X7/8E24900 Zodiac 775 14-3/4" 17-3/4" 57" 3/4" 21-1/2X7/8E25000 Zulu 795 15" 18" 58" 3/4" 21-3/4X7/8Non-standard sizes, materials and special features are available upon request.
FORWARD STERN TUBE SERIES
Part Unit Wt. Shaft Dia. O.D. Length Met.Wall Flange PilotNumber Lbs. AA BB CC GG DD x EE M x NFB1300 75 6" 7-3/4" 15" 3/8" 11-3/8x9/16 8x3/8FB1400 77 6-1/4" 8" 15" 3/8" 11-3/8x9/16 8x3/8FB1500 91 6-1/2" 8-3/8" 15" 7/16" 13-1/2x5/8 8-5/8x3/8FB1600 99 6-3/4" 8-3/4" 15" 7/16" 13-3/4x5/8 9x3/8FB1700 116 7" 9" 17-1/2" 7/16" 13-3/4x5/8 9x3/8FB1800 122 7-1/4" 9-1/4" 17-1/2" 7/16" 14-1/8x5/8 9-5/8x3/8FB1900 123 7-1/2" 9-5/8" 17-1/2" 7/16" 14-1/2x5/8 10x3/8FB2000 126 7-3/4" 9-7/8" 17-1/2" 1/2" 14-1/2x5/8 10x3/8FB2100 145 8" 10-1/4" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2200 150 8" 10-1/2" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2300 157 8-1/4" 10-1/2" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2400 162 8-1/2" 10-3/4" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2500 170 8-3/4" 11" 20" 1/2" 15-5/8x3/4 11-1/8x3/8FB2600 193 9" 11-1/4" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2700 200 9-1/4" 11-1/2" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2800 205 9-1/2" 11-3/4" 22-1/2" 1/2" 16-3/8x3/4 11-7/8x3/8FB2900 217 9-3/4" 12-1/8" 22-1/2" 9/16" 16-7/8x3/4 12-3/8x3/8FB3000 240 10" 12-3/8" 25" 9/16" 16-7/8x3/4 12-3/8x3/8FB3100 244 10-1/4" 12-5/8" 25" 9/16" 17-7/8x3/4 12-3/4x3/8FB3200 247 10-1/2" 12-7/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3300 270 10-3/4' 13-1/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3400 300 11" 13-1/2" 27-1/2" 9/16" 18-5/8x3/4 13-1/2x3/8FB3500 312 11-1/4" 13-3/4" 27-1/2" 9/16" 19x3/4 13-7/8x3/8FB3600 326 11-1/2" 14-1/8" 27-1/2" 5/8" 19x3/4 13-7/8x3/8FB3700 335 11-3/4" 14-3/8" 27-1/2" 5/8" 19-3/8x3/4 14-1/8x3/8FB3800 360 12" 14-3/4" 30" 5/8" 19-3/4x3/4 14-1/2x3/8All materials meet U.S. Navy Specification MIL-B-17901B(SH) Class II
Morse Marine BearingsMorse Rubber LLC 3588 Main St. Keokuk, IA 52632 USATel: 319 524 8430 Fax: 319 524 7290
Rubber
Naval Brass
CC
EE
DD
AA
GG
BB
Forward Stern Tube Flanged Marine Bearings
M
N
Our staff has over 150 years of combined knowledge in the marine industry. Let us help you
find the right part for your application. Give us a call at 800-779-2676 or 949-642-6800.
AllmaterialsmeetU.S.NavySpecificationMIL-B17901B(SH)ClassII
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
361
forward Stern tube Series I
unit Wt ShaFt Dia outSiDe Dia length Met Wall Flange PilotPart # lBS. aa BB CC gg DD x ee M x n
FB1300 75 6” 7-3/4” 15” 3/8” 11-3/8x9/16 8x3/8
FB1400 77 6-1/4” 8” 15” 3/8” 11-3/8x9/16 8x3/8
FB1500 91 6-1/2” 8-3/8” 15” 7/16” 13-1/2x5/8 8-5/8x3/8
FB1600 99 6-3/4” 8-3/4” 15” 7/16” 13-3/4x5/8 9x3/8
FB1700 116 7” 9” 17-1/2” 7/16” 13-3/4x5/8 9x3/8
FB1800 122 7-1/4” 9-1/4” 17-1/2” 7/16” 14-1/8x5/8 9-5/8x3/8
FB1900 123 7-1/2” 9-5/8” 17-1/2” 7/16” 14-1/2x5/8 10x3/8
FB2000 126 7-3/4” 9-7/8” 17-1/2” 1/2” 14-1/2x5/8 10x3/8
FB2100 145 8” 10-1/4” 20” 1/2” 14-7/8x5/8 10-3/8x3/8
FB2200 150 8” 10-1/2” 20” 1/2” 14-7/8x5/8 10-3/8x3/8
FB2300 157 8-1/4” 10-1/2” 20” 1/2” 15-1/4x5/8 10-3/4x3/8
FB2400 162 8-1/2” 10-3/4” 20” 1/2” 15-1/4x5/8 10-3/4x3/8
FB2500 170 8-3/4” 11” 20” 1/2” 15-5/8x3/4 11-1/8x3/8
FB2600 193 9” 11-1/4” 22-1/2” 1/2” 16x3/4 11-1/2x3/8
FB2700 200 9-1/4” 11-1/2” 22-1/2” 1/2” 16x3/4 11-1/2x3/8
FB2800 205 9-1/2” 11-3/4” 22-1/2” 1/2” 16-3/8x3/4 11-7/8x3/8
FB2900 217 9-3/4” 12-1/8” 22-1/2” 9/16” 16-7/8x3/4 12-3/8x3/8
FB3000 240 10” 12-3/8” 25” 9/16” 16-7/8x3/4 12-3/8x3/8
FB3100 244 10-1/4” 12-5/8” 25” 9/16” 17-7/8x3/4 12-3/4x3/8
FB3200 247 10-1/2” 12-7/8” 25” 9/16” 18-1/4x3/4 13-1/8x3/8
FB3300 270 10-3/4’ 13-1/8” 25” 9/16” 18-1/4x3/4 13-1/8x3/8
FB3400 300 11” 13-1/2” 27-1/2” 9/16” 18-5/8x3/4 13-1/2x3/8
FB3500 312 11-1/4” 13-3/4” 27-1/2” 9/16” 19x3/4 13-7/8x3/8
FB3600 326 11-1/2” 14-1/8” 27-1/2” 5/8” 19x3/4 13-7/8x3/8
FB3700 335 11-3/4” 14-3/8” 27-1/2” 5/8” 19-3/8x3/4 14-1/8x3/8
FB3800 360 12” 14-3/4” 30” 5/8” 19-3/4x3/4 14-1/2x3/8
E24100 Yarborough 550 12-3/4" 15-/12" 48-1/2" 5/8" 19-1/4X3/4E24200 Yataghan 563 13" 15-7/8" 50" 11/16" 19-5/8X7/8E24300 Yoeman 610 13-1/4" 16-1/8" 51" 11/16" 19-7/8X7/8E24400 York 640 13-1/2" 16-3/8" 52" 11/16" 20-1/8X7/8E24500 Zephyr 650 13-3/4" 16-5/8" 53" 11/16" 20-3/8X7/8E24600 Zeppelin 675 14" 16-7/8" 54" 11/16" 20-5/8X7/8E24700 Zeppo 701 14-1/4" 17-1/8" 55" 11/16" 20-7/8X7/8E24800 Zircon 754 14-1/2" 17-1/2" 56" 3/4" 21-1/4X7/8E24900 Zodiac 775 14-3/4" 17-3/4" 57" 3/4" 21-1/2X7/8E25000 Zulu 795 15" 18" 58" 3/4" 21-3/4X7/8Non-standard sizes, materials and special features are available upon request.
FORWARD STERN TUBE SERIES
Part Unit Wt. Shaft Dia. O.D. Length Met.Wall Flange PilotNumber Lbs. AA BB CC GG DD x EE M x NFB1300 75 6" 7-3/4" 15" 3/8" 11-3/8x9/16 8x3/8FB1400 77 6-1/4" 8" 15" 3/8" 11-3/8x9/16 8x3/8FB1500 91 6-1/2" 8-3/8" 15" 7/16" 13-1/2x5/8 8-5/8x3/8FB1600 99 6-3/4" 8-3/4" 15" 7/16" 13-3/4x5/8 9x3/8FB1700 116 7" 9" 17-1/2" 7/16" 13-3/4x5/8 9x3/8FB1800 122 7-1/4" 9-1/4" 17-1/2" 7/16" 14-1/8x5/8 9-5/8x3/8FB1900 123 7-1/2" 9-5/8" 17-1/2" 7/16" 14-1/2x5/8 10x3/8FB2000 126 7-3/4" 9-7/8" 17-1/2" 1/2" 14-1/2x5/8 10x3/8FB2100 145 8" 10-1/4" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2200 150 8" 10-1/2" 20" 1/2" 14-7/8x5/8 10-3/8x3/8FB2300 157 8-1/4" 10-1/2" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2400 162 8-1/2" 10-3/4" 20" 1/2" 15-1/4x5/8 10-3/4x3/8FB2500 170 8-3/4" 11" 20" 1/2" 15-5/8x3/4 11-1/8x3/8FB2600 193 9" 11-1/4" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2700 200 9-1/4" 11-1/2" 22-1/2" 1/2" 16x3/4 11-1/2x3/8FB2800 205 9-1/2" 11-3/4" 22-1/2" 1/2" 16-3/8x3/4 11-7/8x3/8FB2900 217 9-3/4" 12-1/8" 22-1/2" 9/16" 16-7/8x3/4 12-3/8x3/8FB3000 240 10" 12-3/8" 25" 9/16" 16-7/8x3/4 12-3/8x3/8FB3100 244 10-1/4" 12-5/8" 25" 9/16" 17-7/8x3/4 12-3/4x3/8FB3200 247 10-1/2" 12-7/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3300 270 10-3/4' 13-1/8" 25" 9/16" 18-1/4x3/4 13-1/8x3/8FB3400 300 11" 13-1/2" 27-1/2" 9/16" 18-5/8x3/4 13-1/2x3/8FB3500 312 11-1/4" 13-3/4" 27-1/2" 9/16" 19x3/4 13-7/8x3/8FB3600 326 11-1/2" 14-1/8" 27-1/2" 5/8" 19x3/4 13-7/8x3/8FB3700 335 11-3/4" 14-3/8" 27-1/2" 5/8" 19-3/8x3/4 14-1/8x3/8FB3800 360 12" 14-3/4" 30" 5/8" 19-3/4x3/4 14-1/2x3/8All materials meet U.S. Navy Specification MIL-B-17901B(SH) Class II
Morse Marine BearingsMorse Rubber LLC 3588 Main St. Keokuk, IA 52632 USATel: 319 524 8430 Fax: 319 524 7290
Rubber
Naval Brass
CC
EE
DD
AA
GG
BB
Forward Stern Tube Flanged Marine Bearings
M
N
AllmaterialsmeetU.S.NavySpecificationMIL-B-17901B(SH)ClassII
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
362
Metric Series Standard Brass and non-MetallicI
inSiDe Dia outSiDe Dia length Part # Part # a B C BraSS non-MetalliC
20 35 80 BM0100 FM0100
22 35 88 BM0200 FM0200
25 40 100 BM0300 FM0300
28 42 112 BM0400 FM0400
30 45 120 BM0500 FM0500
32 45 128 BM0600 FM0600
35 50 140 BM0700 FM0700
38 55 152 BM0800 FM0800
40 55 160 BM0900 FM0900
42 60 168 BM1000 FM1000
45 65 180 BM1100 FM1100
50 70 200 BM1200 FM1200
55 75 220 BM1300 FM1300
60 80 240 BM1400 FM1400
65 85 260 BM1500 FM1500
70 90 280 BM1600 FM1600
75 95 300 BM1700 FM1700
80 100 320 BM1800 FM1800
85 105 340 BM1900 FM1900
90 110 360 BM2000 FM2000
95 115 380 BM2100 FM2100
100 125 400 BM2200 FM2200
105 130 420 BM2300 FM2300
110 135 440 BM2400 FM2400
115 145 460 BM2500 FM2500
120 155 480 BM2600 FM2600
125 165 500 BM2700 FM2700
130 170 520 BM2800 FM2800
135 170 540 BM2900 FM2900
140 180 560 BM3000 FM3000
145 180 580 BM3100 FM3100
150 190 600 BM3200 FM3200
155 190 620 BM3300 FM3300
StAnDArD BrASS SleeVeSleevebearingswithNavalBrassoutershellsuper-bondedtoaflutedrubberbearingsurface.Engineeredtomeetthetoughestservicerequirementsinmarineandindustrialapplications.
non-MetAllIC SleeVeThespecialshellusedinnon-metallicsleevebearingsprovidescorrosionandchemicalresistance,electricalinsulation,weightadvantage,andvirtuallynoswellinseawater.
MARINE BEARINGS
Part No. Part No.I.D. (A) O.D. (B) LNTH. (C) Brass Non-Metallic
20 35 80 BM0100 FM010022 35 88 BM0200 FM020025 40 100 BM0300 FM030028 42 112 BM0400 FM040030 45 120 BM0500 FM050032 45 128 BM0600 FM060035 50 140 BM0700 FM070038 55 152 BM0800 FM080040 55 160 BM0900 FM090042 60 168 BM1000 FM100045 65 180 BM1100 FM110050 70 200 BM1200 FM120055 75 220 BM1300 FM130060 80 240 BM1400 FM140065 85 260 BM1500 FM150070 90 280 BM1600 FM160075 95 300 BM1700 FM170080 100 320 BM1800 FM180085 105 340 BM1900 FM190090 110 360 BM2000 FM200095 115 380 BM2100 FM2100100 125 400 BM2200 FM2200105 130 420 BM2300 FM2300110 135 440 BM2400 FM2400115 145 460 BM2500 FM2500120 155 480 BM2600 FM2600125 165 500 BM2700 FM2700130 170 520 BM2800 FM2800135 170 540 BM2900 FM2900140 180 560 BM3000 FM3000145 180 580 BM3100 FM3100150 190 600 BM3200 FM3200155 190 620 BM3300 FM3300
Morse Marine BearingsMorse Rubber LLC3588 Main St.Keokuk, IA 52632 USATel: 319 524 8430 Fax: 319 524 7290
Dimensions (MM)
METRIC SERIES STANDARD BRASS SLEEVE
Sleeve bearings with Naval Brass outer shell super-bonded to a fluted rubber bearing surface.Engineered to meet the toughest service requirements in marine and industrial applications.
NON-METALLIC SLEEVEThe special shell used in non-metallic sleeve bearings provides corrosion and chemicalresistance, electrical insulation, weight advantage, and virtually no swell in sea water.
A
B
C Shaft Dia.
DIMenSIonS In MM
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
363
The Number One Selling Marine Mechanical SealThePSSShaftSeal is thenumberonesellingmarinemechanicalsealworldwideandisinstalledasstandardequipmentbymanyoftheworldsmostreputableboatbuilders/yards.ThePSSShaftSealisalsorecognizedasthepremiereretrofit(aftermarket)sealontheworldmarket.CertifiedbyBureauVeritas,ABS&Rina:Boatbuilders / yards recognize the advantages and valueof installingthePSSasiteliminatesthemaintenance,constantadjustment&costassociatedwithtraditionalpackingtypeglands.Asidefromthesebenefits,thePSSShaftSealhelpstoeliminatewater inthebilge(100%watertight)&weartothepropellershaft.ThePSSShaftSealcanbeeasilyretrofittedandisavailableforshaftsrangingfrom3/4"(20mm)to8"(205mm).
How Does The PSS Mechanical Shaft Seal Work?
The PSS Shaft Seal is a mechanical face seal thatis created between the flat surfaces of the rotatingstainless steel rotor and thestationarycarbonflange.Thestationarycarbonflangeisattachedtothevesselsstern tube with hose clamps and the carbon flangeisattached to the front sideof thebellowswithhoseclamps. The stainless steel rotor is fit on the shaft infront of the carbon flange. The stainless steel rotoris used to compress the bellows before the collar issecuredtotheshaftwithset-screws.Thiscompression(pre-load) maintains contact between the faces andallowsthePSStocompensateforthethrust fromthepropeller. The carbon flange is bored larger than theshaftdiameterallowingitto“float”aroundtheshaftandthuscompensateformostmisalignmentandvibrationproblems. The stainless steel collar is sealed to theshaft by two o-rings that are recessed into the boreof the collar. These o-rings rotate with the shaft andstainlesssteelrotoranddonotexperiencewearduringoperation.
Stuffing Box
Transmission
Hull
Stern Tube (Shaft Log)
Shaft
Rubber Hose
Classic Stuffing Box - Before
Transmission
Hull
Stern Tube (Shaft Log)
Shaft
CompressionLength
Classic Stuffing Box - After
pYI, Inc. Shaft Seals I
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
364
Sizes 3/4" to 3 3/4" (20 mm - 95 mm) ShaftsI
HigH Density Carbon/grapHite FlangeThis space age composite is machined to shape. The face is then lapped to 4 light bands. Once installed and operational the carbon/graphite face will actually polish the stainless steel rotor face during the initial minutes of operation. This polishing process ensures a perfect seal and eliminates the necessity of a spray guard. The high density of this composite greatly increases its impact and wear resistance. At a maximum operating temperature of 500°F the carbon guards against any overheating situation unlike other seals using plastic derivatives. The carbon graphite flange should never need replacing under normal operating conditions.
allen HeaD set sCrewsAllen head set screws with cupped ends are threaded into the rotor and secured to the proper shaft. A second set screw is then threaded into each hole to secure the first screw and to prevent it from possibly backing out. The set screws also have an anti-vibration treatment applied.
bellowsThe EPDM bellows has a temperature rating of 300°F is resistant to petroleum based products and is very resistant to abrasions and set retention. It provides the best combination of durability, strength, and elasticity. The stern tube end of the bellow is available in 1/4" increments. both shaft and stern tube diameters are necessary when ordering.
3/4" - 3 3/4"20 mm - 95 mm
Shaft Sizes.
nylon Hose barb Fitting***The nylon hose barb fitting is threaded into the carbon flange. The Barb fitting is used to plumb water to the seal or to run a vent line.
stainless steel rotorThe one-piece stainless steel (Type 316) rotor is slid down and secured to the propeller shaft with double set screws after compression is applied to the bellows. Precision tolerances are maintained by computer controlled lathe. The stainless steel should never need replacing under normal operating conditions.
stern tube
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)
365
Size 4" - 6" (100 mm - 150 mm) Shafts I
HigH Density Carbon/grapHite Flange(See opposite page for description).
ClotH inlay siliCone bellowsCloth inlay silicone bellow have a temperature rating of 400°F+, and rate resistant to petroleum based products and abrasions.
Double nylon Hose barb Fitting(See opposite page for description).
Double Hose ClampsTwo stainless steel hose clamps are used to secure the bellow at both the stern and flange ends.
stainwless steel Hoops
stern tube
316l stainless steel Compression Clamp
4" - 6" 100 mm - 150 mm
Shaft Sizes.
Driveline & engine
Mounting
BoAtSWAIn’S loCker® WWW.BoAtSWAInSloCker.CoM
366
pYI DimensionsI
Driv
elin
e &
eng
ine
Mou
ntin
g
BoAtSWAIn’S loCker® 800-779-BoSn (2676)