Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Section I IndexCORROSION-RESISTANT DEVICESProduct Features ...........................................................................................I1, I22 POLE 3 WIRE GROUNDING STRAIGHT BLADE15A 125V, 15A 250V............................................................................................I320A 125V, 20A 250V............................................................................................I32 POLE 3 WIRE GROUNDING LOCKING15A 125V..............................................................................................................I420A 125V..............................................................................................................I530A 125V..............................................................................................................I6Cruising Adapters ..............................................................................................I750A 125V..............................................................................................................I83 POLE 4 WIRE GROUNDING LOCKING50A 125/250V.......................................................................................................I9WATERTIGHT & DUST-TIGHTProduct Features.........................................................................................I10, I11Watertight Elastomeric Plugs & Connectors.......................................................I12Dust-tight Elastomeric Plugs & Connectors........................................................I13Weather Protective Covers.................................................................................I14Portable Outlet Boxes ........................................................................................I15Weather Protective Boots.........................................................................I16, I17Weather Protective Outdoor Plates ................................................................I18Nonmetallic Boxes and Covers.......................................................................I19Ship-to-Shore Guide..................................................................................I20, I21
Product Features Corrosion-Resistant Devices
High-visibility yellowface is molded of impact/chemical- resistantnylon
Nylon washers on cover hingeminimize friction and abrasion forlong-lasting performance
Nickel and tin-plated copper-alloy contacts andterminals resist corrosion
Heavy-duty nickel-plated brassmounting straps resist corrosion.Wide width design assuressecure assembly
High strength #10 silicon bronze terminalscrews resist corrosion and providesecure terminations
LOCKING RECEPTACLE70530FRCR
Base is molded of ruggedreinforced thermoplastic polyester to minimize heatbuildup
Stainless steel mounting screwsresist corrosion
Bryant offers a complete line of corrosion-resistant devices for industrial, commercial and marine applications. Available in locking and straight bladeconfigurations, each device is designed to provide extra protection in corrosiveconditions such as food processing plants, breweries, dairies, chemical plants,metal fabrication facilities, marine/shipboard and temporary power applications.Bryant corrosion-resistant devices are engineered with materials such asimpact/chemical-resistant nylon, to provide strength and resistance to
chemicals such as hydrocarbons and solvents typically found in industrial environments. Brass and copper-alloy metal parts are nickel-plated to resistcorrosion and oxidation which can occur in salt air/water environments.Weather-protective boots and outdoor plates provide additional protectionagainst infiltration of contaminants. Corrosion-resistant devices are molded ofhigh-visibility yellow nylon for easy identification.
SHORE POWER INLETS AND OUTLETS
One-piece rivetlesscopper-alloy power contacts reduce heatbuildup and providesecure plug blade retention
70530MPI
72002M70530NCCR
I1
Product specifications appearing in the following section are subject to change without notice.
Copper-alloy blades and terminals have .0003 nickelplating. Amperage and voltage rating molded into facefor easy identification
Hinged cover locks at 90° in openposition, leaves hands free forinserting power cord connector andthread sealing ring
Exclusive neoprene “O” ring, situated between cover and plate,improves ease of opening andclosing cover by sealing threadsagainst contamination. Provideswater-resistant compression fit.Assures maximum protection forinterior components.
Yellow neoprene boot withthreaded nonmetallic sealing ring for use withconnector when used withpower inlets
.0003 nickel-plated brass plate and coverassembly plus chrome finish provides exceptional corrosion resistant properties and attractive, maintenance-free performance
Product Features Corrosion-Resistant Devices
70530NPCR Plug72002BP Boot
70530NCCR Connector72002BC Boot
70530NPCR
WEATHER PROTECTIVE BOOTS
Universal nonmetallic Triple-Gripper cordgrip
Silicon bronzeassembly screws
Copper-alloy blades and terminals have .0003 nickelplating
Above Assembled
See-thru terminal cover allowsvisual inspection for properwire terminations.
Devices are keyed for easyassembly
TPE dust seal helps prevent moisture and foreign matterfrom entering wiring chamber
Specifications are subject to change without notice.I2
Dead front construction complies withNational Electrical Code requirements
High-visibility yellowtoughened nylonconstruction
Individual wirepockets with clamp-type termi-nals
Features - SpecificationsRECEPTACLE
Metal parts have .0003 nickel plating to resist corrosionCopper-alloy contacts, terminals and self-grounding strapStainless steel mounting screwsNickel-plated brass yokeBack wiring: eight wiringpockets for convenient feedthru wiring, clamp-type terminals accept up to #10 wireApproved for CU wire onlyTerminal screws: brass combination Phillips/slotted/ Robertson binding head, accepts up to #10wireVerified under Fed. Spec. #WC596. See page P-1 for complete listing.
One-piece grounding system with built-in self-grounding strapHigh-visibility yellow colorMolded of impact/chemical-resistant nylonUL Listed File #E2258 – Guide #RTRTCSA Certified File #LR16215 – Guide #365E1
NYLON PLUG AND CONNECTOR
Metal parts have .0003 nickel platingCopper-alloy blades, contacts and terminalsSilicon bronze assembly screwsImpact/chemical-resistant nylon/polymer construction with automatic cord gripHigh-visibility yellow color
Pre-attached TPE dust seal UL Listed File #E1381 – Guide #AXUTCSA Certified File #LR16215 – Guide #20T2
ALL DEVICESComply with NEMA Standards WD-1, WD-6 and UL 498NOMCE
See page I-16 for information on weather protective boots.See page P-3 for horsepower ratings.Specifications are subject to change without notice.
5262CR 5361CR 5266NCR 5369NCR
5269NCR
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
BRY5362CR
5361CR
CATALOG NO.NEMA CONFIGURATION
DESCRIPTIONRECEP. & PLUGSCONN.
5261CR 15 AMP 125V Single receptacle, yellow nylon, back and side wiredBRY5262CR Duplex receptacle, yellow nylon, back and side wiredBRY5262BCR Duplex receptacle, brown nylon, back and side wired
5266NCR Attachment plug, yellow nylon/polymer5269NCR 5-15R 5-15P Connector body, yellow nylon/polymer
15 AMP 250V
5661CR Single receptacle, yellow nylon, back and side wiredBRY5662CR Duplex receptacle, yellow nylon, back and side wired
6-15R5361CR 20 AMP 125V Single receptacle, yellow nylon, back and side wiredBRY5362CR Duplex receptacle, yellow nylon, back and side wired
5366NCR Attachment plug, yellow nylon/polymer5369NCR 5-20R 5-20P Connector body, yellow nylon/polymer
20 AMP 250V
5461CR Single receptacle, yellow nylon, back and side wiredBRY5462CR Duplex receptacle, yellow nylon, back and side wired
6-20R
RECEPTACLES, ATTACHMENT PLUGS AND CONNECTORS
5266NCR
Corrosion-Resistant Straight Blade Devices2-Pole 3-Wire Grounding
2.38(60.5)
3.28(83.3)
4.06(103.1)
1.38 (35.1).91
(23.4)
1.78(45.2)
1.57 (39.9)
2.10(53.3)
1.38 (35.1)
.13(3.3)
CORROSIONRESISTANT
1.57(39.9)
2.68(68.1)
1.38(35.1)
.13(3.3)
CORROSIONRESISTANT
I3
.92(23.4)
2.69(68.3)
4.06(103.1)
3.29(83.6)
1.54(39.1)
1.16(29.5)
Features - SpecificationsDUPLEX RECEPTACLE
Nickel-plated brass yokeHi-visibility yellow RTP constructionBack and side wiredNickel-plated copper-alloy contacts
SINGLE RECEPTACLE.050 nickel-plated brass yokeImpact/chemical-resistant, high-visibility yellow nylonBack and side wiredNickel-plated copper-alloy contactsUL Listed File #E2258 – Guide #RTRTCSA Certified File #LR16215 – Guide #365E1
NYLON PLUG AND CONNECTOR
Impact/chemical-resistant nylon constructionHigh-visibility yellow nylon with nonmetallic Triple-Gripper cord gripThree captive assembly screws automatically tighten cord gripAll metal parts have .0003 nickel platingCopper-alloy blades, contacts and terminalsSilicon bronze assembly screwsDead front constructionIndividual wire pockets with clamp-type terminalsUL Listed File #E1381 – Guide #AXUTCSA Certified File #LR16215– Guide #20T2
NOMCE
Reinforced Thermoplastic PolyesterSee page I-16 for information on weather protective boots.
See page P-3 for horsepower ratings.
Specifications are subject to change without notice.
4700DRCR 4710CR 4721NPCR 4732NCCR
4732NCCR
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
4700DRCR
4710CR
CATALOG NUMBER CORD DIA. DESCRIPTION
4700DRCR — Duplex receptacle, yellow urea, back wired, clamp-type terminals
4710CR — Single receptacle, yellow nylon, back and side wired
4721NPCR .300-.655 (7.6-16.6) Attachment plug, yellow nylon, back wired, clamp-type terminals
4732NCCR .300-.655 (7.6-16.6) Connector body, yellow nylon, back wired, clamp-type terminals
RECEPTACLES, ATTACHMENT PLUGS AND CONNECTORS
4721NPCR
2-Pole 3-Wire Grounding15 Amp 125V Corrosion-Resistant Locking DevicesNEMA L5-15
3.28(83.3)
2.74(69.5)
1.70(43.2)
1.17(29.67)
.93(23.72)
1.37(34.8)
1.01(25.7)
.25(6.4)
2.95(75.0)
1.38(35.1)
1.53(39.1)
1.41 (35.8)
1.38(35.1)
2.38(60.5)
3.28(83.3)
2.18(55.2)
1.53(39.1)
1.38(35.1)
WEATHER PROTECTIVE BOOTSCATALOG NUMBER DESCRIPTION
5200BP Yellow neoprene boot for use with plug
5200BC Yellow neoprene boot for use with connector
5200BSR Yellow neoprene sealing ring, seals connector
I4
2-Pole 3-Wire
Features - SpecificationsRECEPTACLE
Metal parts have .0003 nickel plating to resist corrosionCopper-alloy contacts,terminals and shuntStainless steel mounting screwsHeavy-duty, copper-alloy nickel-plated yokeCombination back and side wiring, clamp-type terminals; accept #14 through #8 AWG solid or stranded conductorsFace molded of impact/chemical-resistant high-visibility nylonUL Listed File #E2258 – Guide #RTRT
CSA Certified File #LR16215 – Guide 365E1
NYLON PLUG AND CONNECTOR
All metal parts have .0003 nickel platingSilicon bronze assembly screwsCopper-alloy blades, contacts and terminalsTPE cord dust sealImpact/chemical-resistant toughened nylon constructionHigh-visibility yellow nylonInternal Triple-Gripper cord gripUL Listed File #E1381 – Guide #AXUTCSA Certified File #LR16215 – Guide #20T2
ALL LOCKING DEVICESComply with NEMA StandardsWD-1, WD-6 and UL 498NOMCE
See page I-17 for more information on boots.See page P-3 for horsepower ratings.Specifications are subject to change without notice.
70520NCCR
70520FRCR
70520NPCR
CATALOG NUMBER CORD DIA. DESCRIPTION
70520FRCR — Single flush receptacle, yellow nylon face,back or side wiring, clamp-type terminals
70520NPCR .300-.950 (7.6-24.1) Attachment plug, yellow nylon, back wired,clamp-type terminals
70520NCCR .300-.950 (7.6-24.1) Connector body, yellow nylon, back wired,clamp-type terminals
WEATHER PROTECTIVE BOOTSCATALOG NUMBER DESCRIPTION
72002BP Yellow neoprene boot for use with plug
72002BC Yellow neoprene boot for use with connector
72002BSR Yellow neoprene sealing ring, seals connector
72002M Yellow neoprene boot with threaded nonmetallic sealing ring,for use with 70520MPI and 70520NCCR
20 Amp 125V GroundingCorrosion-Resistant Locking DevicesNEMA L5-20
70520FRCR 70520NPCR 70520NCCR
1.70 (43.2)
3.28(83.3)
2.38(60.5)
6 x 32TAP
2.85(72.3)MAX
1.83 DIA.(46.5)
2.13 DIA.(54.0)
3.90(99.0)MAX
1.83 DIA.(46.5)
2.13 DIA.(54.0)
2.67(67.8)
1.56(39.6)DIA.
1.24 (31.5).26
(6.6)
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
I5
2-Pole 3-Wire
Features - SpecificationsRECEPTACLE
Metal parts have .0003 nickel plating to resist corrosionCopper-alloy contacts, termi-nals and shuntStainless steel mounting screwsHeavy-duty, copper-alloy nickel-plated yokeCombination back and side wiring, clamp-type terminals; accept #14 through #8 AWG solid or stranded conductorsFace molded of impact/chemi-cal-resistant high-visibility yellow nylonUL Listed File #E2258 – Guide #RTRTCSA Certified File #LR16215 – Guide #365E1
NYLON PLUG AND CONNECTOR
All metal parts have .0003 nickel platingSilicon bronze assembly screwsCopper-alloy blades, contacts and terminalsTPE cord dust sealImpact/chemical-resistant toughened nylon constructionHigh-visibility yellow nylonInternal Triple Gripper cord grip
POWER INLET.0003 nickel-plated forged brass body and cover assembly plus chrome finishExclusive neoprene “O” ring between cover and plate seals threads against contamination
Hinged cover locks at 90° in open position
NYLON PLUG, CONNECTOR AND POWERINLET
UL Listed File #E1381 – Guide #AXUTCSA Certified File #LR16215 – Guide #20T2
ALL LOCKING DEVICESComply with NEMA Standards WD-1, WD-6 and UL 498NOMCE
To be discontinued when supplies are exhausted. See page I-17 for more information on boots.
See page P-3 for horsepower ratings.
Specifications are subject to change without notice.
530MCS
70530FRCR
70530MPI
70530MPO
CATALOG NUMBER CORD DIA. DESCRIPTION
70530FRCR — Single flush receptacle, yellow nylon face,back or side wiring, clamp-type terminals
70530MPI — Power inlet, chrome-plated brass with neoprene “O” ring, back wired, clamp-type terminals
70530MPO — Power outlet, chrome-plated brass with neoprene “O” ring, back wired, clamp-type terminals
70530NPCR .300-.950 (7.6-24.1) Attachment plug, yellow nylon,clamp-type terminals, Triple-Gripper cord grip
70530NCCR .300-.950 (7.6-24.1) Connector body, yellow nylon,clamp-type terminals, Triple-Gripper cord grip
530MCS25 — 30 amp 125V pre-wired 25 ft. cord set10 AWG, 3 conductor STO, yellow
530MCS — 30 amp 125V pre-wired 50 ft. cord set10 AWG, 3 conductor STO, yellow
WEATHER PROTECTIVE BOOTSCATALOG NUMBER DESCRIPTION
72002BP Yellow neoprene boot for use with plug72002BC Yellow neoprene boot for use with connector72002BSR Yellow neoprene sealing ring, seals connector
72002M Yellow neoprene boot with threaded nonmetallic sealing ring,for use with 70530MPI and 70530NCCR
30 Amp 125V Grounding Corrosion-Resistant Locking DevicesNEMA L5-30
70530NPCR
70530NCCR
70530FRCR 70530MPI 70530NPCR 70530NCCR
1.70 (43.2)
3.28(83.3)
2.38(60.5)
6 x 32TAP
2.85(72.3)MAX
1.83 DIA.(46.5)
2.13 DIA.(54.0)
3.90(99.0)MAX
1.83 DIA.(46.5)
2.13 DIA.(54.0)
3.25(82.6)
4.12 (104.6)2.38 (60.5)
SQ..19 (4.8) DIA. (4)
1.34(34.0)
2.04(51.8)
2.67(67.8)
1.56(39.6)DIA.
1.24 (31.5).26
(6.6)
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
I6
Features - SpecificationsEmergency adapters for temporary dockside powerHigh-visibility yellow for easy identificationPlugs and connectors feature .0003 (.0076) nickel-plated metal parts for resistance tocorrosion in marine and outdoor applications
Weather-protective neoprene bootsSilicon bronze assembly screwsCopper-alloy blades, contacts and terminalsNEMA line number and rating molded or heat-stamped on face for easy identificationDead front construction
The adapters shown on this page are not UL Listed.Specifications are subject to change without notice.
3015/1530 2128CR/2129CR
2129CR
1530
CATALOG NO.CONFIGURATIONS
DESCRIPTIONPLUG CONNECTOR
3015
1530
2128CR
2129CR
PRE-ASSEMBLED ADAPTERS
Corrosion-Resistant Adapters
2128CR
3015
CAUTION:THE USE OF ADAPTERS RECOMMENDED ONLY WITHIN THE FOLLOWING CONDITIONS:A. When the supply and equipment are of the same voltage rating.B. When the total amperage drawn does not exceed the lowest amperage rated device of the adapter.C. When the grounding continuity and polarity are maintained.D. When adapter is away from water.
Permits the use of 30 amp 125V locking cable set with 15amp straight blade receptacle, 12/3 type ST cord, yellow
Permits the use of 15 or 20 amp straight blade cable set with30 amp 125V locking receptacle, 12/3 type ST cord, yellow
Permits the use of 20 amp 125V locking cable set with 15amp 125V straight blade receptacle, 12/3 type ST cord, yel-low
Permits the use of 15 or 20 amp straight blade cable set with20 amp 125V locking receptacle, 12/3 type ST cord, yellow
5-15P L5-30R15 Amp 125V 30 Amp 125V
L5-30P 5-20R30 Amp 125V 20 Amp 125V
5-15P L5-20R15 Amp 125V 20 Amp 125V
L5-20P 5-20R20 Amp 125V 20 Amp 125V
WARNINGDO NOT REMOVE THIS TAG
14.00 (355.6) 14.00 (355.6)
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
I7
WARNING :RISK OF ELECTRIC SHOCKADAPTER DOES NOT PROVIDE SHOCK HAZARD PROTECTIONUSE WITH GFCI PROTECTION
Features - SpecificationsRECEPTACLE
Casing and mounting strap nickel-plated brassCopper-alloy contacts are nickel-platedPressure-type terminals Stainless steel terminal screwsThermoset bodyMounts in F.S. and F.D. boxesUL Listed File #E2258 – Guide #RTRTCSA Certified
PLUG AND CONNECTORCasing and cord grip nickel-plated brassNickel-plated copper-alloy blades/contactsStainless steel terminal screwsThermoset bodyPressure-type terminalsDevices are keyed for proper assemblyUL Listed File #E1381 – Guide #AXUTCSA Certified
POWER INLETChrome-plated brass plate and cover assemblyNickel-plated copper-alloy blades and terminalsStainless steel terminal screwsMounting screws and neoprene gasket suppliedPressure-type terminalsThermoset bodyUL Listed File #E1381 – Guide #AXUTCSA Certified
See page I-19 for boxes, covers and adapters.See page I-17 for more information on boots.
Specifications are subject to change without notice.
6360CR
6370CR
6372CR
CATALOG NUMBER CORD DIA. DESCRIPTION
6370CR — Single receptacle, nickel-plated brass
6372CR — Power inlet, chrome-plated brass
6361CR .83-1.1 (21.1-27.9) Plug, nickel-plated brass
6360CR .83-1.1 (21.1-27.9) Connector body, nickel-plated brass
WEATHER PROTECTIVE BOOTSCATALOG NUMBER DESCRIPTION
7715CR Yellow neoprene boot with threaded ring for6360CR when used with 6372CR power inlet
7716CR Yellow neoprene boot for 6361CR plug
7717CR Yellow neoprene boot for 6360CR connector bodies when used on extension cords or adapters
6361CR
Corrosion-Resistant Locking Devices
2-Pole 3-Wire Grounding50 Amp 125V
6372CR
6370CR 6361CR 6360CR
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
2.12 (53.8)
3.28(83.3)
2.69(68.3)
1.03(26.2)
2.44 (62.0)
2.38(60.5)SQ.
3.94(100.1)
3.00(76.2)SQ.
2.05(52.1)
2.17(55.1)
4.68(118.9)
2.31 (58.7)
4.50(114.3)
2.31 (58.7)
I8
6364CR
6369CR
6374CR
6365CR
Corrosion-Resistant Locking Devices
3-Pole 4-Wire Grounding50 Amp 125/250VEQ
GR
Features - SpecificationsRECEPTACLE
Casing and mounting strap nickel-plated brass
Copper-alloy contacts are nickel-plated
Pressure-type terminals
Stainless steel terminal screws
Thermoset body
Mounts in F.S. and F.D. boxes
UL Listed File #E2258 – Guide #RTRT
CSA Certified
PLUG AND CONNECTORCasing and cord grip nickel-plated brass
Nickel-plated copper-alloy blades/contacts
Stainless steel terminal screws
Thermoset body
Pressure-type terminals
Devices are keyed for proper assembly
UL Listed File #E1381 – Guide #AXUT
CSA Certified
POWER INLETChrome-plated brass plate and cover assembly
Nickel-plated copper-alloy blades and terminals
Stainless steel terminal screws
Mounting screws and neoprene gasket supplied
Pressure-type terminals
Thermoset body
UL Listed File #E1381 – Guide #AXUT
CSA Certified
CATALOG NUMBER CORD DIA. DESCRIPTION
6369CR — Single receptacle, nickel-plated brass
6374CR — Power inlet, chrome-plated brass
6365CR .83-1.1 (21.1-27.9) Plug, nickel-plated brass
6364CR .83-1.1 (21.1-27.9) Connector body, nickel-plated brass
See page I-19 for boxes, covers and adapters.See page I-17 for more information on boots.
Specifications are subject to change without notice.
WEATHER PROTECTIVE BOOTSCATALOG NUMBER DESCRIPTION
7715CR Yellow neoprene boot with threaded ring for6364CR when used with 6374CR power inlet
7716CR Yellow neoprene boot for 6365CR plug
7717CR Yellow neoprene boot for 6364CR connector bodies when used on extension cords or adapters
6374CR
6369CR 6365CR 6364CR
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
2.12 (53.8)
3.28(83.3)
2.69(68.3)
1.03(26.2)
2.44 (62.0)
2.38(60.5)SQ.
3.94(100.1)
3.00(76.2)SQ.
2.05(52.1)
2.17(55.1)
4.68(118.9)
2.31 (58.7)
4.50(114.3)
2.31 (58.7)
I9
Product Features Watertight/Dust-Tight ElastomericPlugs and Connectors
Closure cap seals outwater and dirt when notin use
WATERTIGHT recommended where moisture exists or casual submersion is possible
Strain relief compression cordseal with neoprene bushing
Double insulated elastomericcover & PBT body for extrasafety and water resistanceTongue & groove sealing
system for optimum protection
Accepts 18/3 to10/3 cord
All yellow/green color foreasy identification
Corrosion-resistant nickelplated blades
Stainless steel captive assemblyscrews, maximum corrosion resistance
Free floatingstrain reliefcenters cord automatically
DUST-TIGHT recommended where minute airborne fibers and dust are present
Solid brass bladesInternal one-piece dusttight seal
Exterior ribbing provides firmfinger grip
Double insulated elastomeric cover & PBTbody for extra safety and water resistance
Tapered endsreduce cord snagging
Extra Bushings
Color coded rubber cordsealer bushings supplied
for diameter ranges .30-.910.
I10
Specifications are subject to change without notice.
Product FeaturesPortable Outlet Boxesand Weather Protective Covers
I11
Specifications are subject to change without notice.
PORTABLE OUTLET BOX
Self closing flip seals provideprotection against moisturewhen closed
Heavy-duty stainless steel springs,resistant to oils and solvents
Compression neoprene bushings seal outmoisture (cord sizes #16/3 SO to #12/3 SO)
Large internal cavity for easywiring of two duplex receptacles
Non-conductive, non-metallic box
Molded impact-resistantThermoplastic Elastomer
WEATHER PROTECTIVE COVERS
3005BRY
Extra heavy-duty stainless steel springloaded cover, automatically closes
Fiber reinforced polycarbonate for impactand chemical resistance
Weather resistantElastomeric seal
Steel reinforced backplate
Back view
Pre-wired ground
See-thru view for security
Large wiring chambers for easy termination
67W47BRY
Available with or withoutreceptacles
I12
29W76BRY
14W47BRY
15W47BRY
28W76BRY
Elastomeric Plugs and Connectors
WatertightStraight Blade and Locking
Features - SpecificationsHigh-visibility yellow thermoplasticelastomeric housing
Rugged PBT interiors provide excellentresistance to moisture and temperatures
Tongue and groove plug to connector sealingsystem for optimum protection
Nickel-plated contacts and blades
Stainless steel captive assembly screws
Accepts multiple cord diameters
Operating temperature: -20°C to 65°C
Individual neoprene bushings provide water-tight sealing
15 - 30 amp range up to 600 volts
Keyed body and cover for proper alignment
Recommended where moisture exists or casual submersion is possible
Comply with NEMA standards WD-1, WD-6,and UL498, UL544
UL File #E1381 Guide AXUT
CSA Certified
Meets NEC requirements for “Wet & DampLocations”
Meets OSHA requirements
CATALOG NUMBERAMP VOLTS NEMA DESCRIPTION
PLUG CONNECTOR
14W47BRY 15W47BRY 15A 125V 5-15 Straight blade, 2-pole 3-wire
24W47BRY 25W47BRY 15A 125V L5-15 Locking, 2-pole 3-wire
14W49BRY 15W49BRY 15A 250V 6-15 Straight blade, 2-pole 3-wire
24W49BRY 25W49BRY 15A 250V L6-15 Locking, 2-pole 3-wire
14W33BRY 15W33BRY 20A 125V 5-20 Straight blade, 2-pole 3-wire
26W47BRY 27W47BRY 20A 125V L5-20 Locking, 2-pole 3-wire
26W74BRY 27W74BRY 20A 125/250V L14-20 Locking, 3-pole 4-wire
14W48BRY 15W48BRY 20A 250V 6-20 Straight blade, 2-pole 3-wire
26W48BRY 27W48BRY 20A 250V L6-20 Locking, 2-pole 3-wire
26W75BRY 27W75BRY 20A 250V 3Ø L15-20 Locking, 3-pole 4-wire
26W76BRY 27W76BRY 20A 480V 3Ø L16-20 Locking, 3-pole 4-wire
28W47BRY 29W47BRY 30A 125V L5-30 Locking, 2-pole 3-wire
28W74BRY 29W74BRY 30A125/250V L14-30 Locking, 3-pole 4-wire
28W48BRY 29W48BRY 30A 250V L6-30 Locking, 2-pole 3-wire
28W75BRY 29W75BRY 30A 250V 3Ø L15-30 Locking, 3-pole 4-wire
28W76BRY 29W76BRY 30A 480V 3Ø L16-30 Locking, 3-pole 4-wire
28W77BRY 29W77BRY 30A 600V 3Ø L17-30 Locking, 3-pole 4-wire
Specifications are subject to change without notice.
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
20 Amp Locking
2.45(62.2)
1.58(40.1)
3.75(95.3)
1.83(46.5)
3.00(76.2)
2.18(55.4)
4.70(119.4)
2.57(65.3)
15 and 20 Amp Straight Blade15 Amp Locking
I13
Features - SpecificationsOne-piece molded elastomeric cover withintegral dust seal
Withstands high impact, corrosion, oil, andsolvents
Free floating strain relief centers cord automatically
Tapered ergonomic body style reduces cordsnags
Solid brass blades and contacts
Stainless steel captive assembly screws
Back wire transparent wiring wells
Rugged PBT interiors provide excellent resistance to dust particles
Operating temperature:-20°C to 100°C
Comply with NEMA standards WD-1, WD-6,and UL498, UL544
UL File #E1381 Guide AXUT
CSA Certified
Meets OSHA requirements
Specifications are subject to change without notice.
2976BRY
1447BRY
1547BRY
2876BRY
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
CATALOG NUMBERAMP VOLTS NEMA DESCRIPTION
PLUG CONNECTOR
1447BRY 1547BRY 15A 125V 5-15 Straight blade, 2-pole 3-wire
2447BRY 2547BRY 15A 125V L5-15 Locking, 2-pole 3-wire
1449BRY 1549BRY 15A 250V 6-15 Straight blade, 2-pole 3-wire
2449BRY 2549BRY 15A 250V L6-15 Locking, 2-pole 3-wire
1433BRY 1533BRY 20A 125V 5-20 Straight blade, 2-pole 3-wire
2647BRY 2747BRY 20A 125V L5-20 Locking, 2-pole 3-wire
2674BRY 2774BRY 20A 125/250V L14-20 Locking, 3-pole 4-wire
1448BRY 1548BRY 20A 250V 6-20 Straight blade, 2-pole 3-wire
2648BRY 2748BRY 20A 250V L6-20 Locking, 2-pole 3-wire
2675BRY 2775BRY 20A 250V 3Ø L15-20 Locking, 3-pole 4-wire
2676BRY 2776BRY 20A 480V 3Ø L16-20 Locking, 3-pole 4-wire
2847BRY 2947BRY 30A 125V L5-30 Locking, 2-pole 3-wire
2874BRY 2974BRY 30A125/250V L14-30 Locking, 3-pole 4-wire
2848BRY 2948BRY 30A 250V L6-30 Locking, 2-pole 3-wire
2875BRY 2975BRY 30A 250V 3Ø L15-30 Locking, 3-pole 4-wire
2876BRY 2976BRY 30A 480V 3Ø L16-30 Locking, 3-pole 4-wire
2877BRY 2977BRY 30A 600V 3Ø L17-30 Locking, 3-pole 4-wire
Elastomeric Plugs and Connectors
Dust-TightStraight Blade and Locking
2.44(62.0)
1.58(40.1)
3.10(78.7)
1.58(40.1)
2.99(76.0)
1.98(50.3)
4.06(103.1)
1.98(50.3)
20 Amp Locking15 and 20 Amp Straight Blade15 Amp Locking
I14
6700BRY
60W47BRY
67W47BRY
Weather Protective CoversFor Single 15, 20, 30 Amp Receptacles
Features - SpecificationsProvides weather resistant elastomeric sealaround receptacles and plugs while in use
Stainless steel spring loaded cover closesautomatically
Impact/chemical-resistant
Operating temperature:-20°C to 100°C
Mounts to FS and FD boxes
Can be panel mounted to any flat surface
Available with or without receptacle
Recommended where moisture exists
Devices comply with NEMA standards WD-1,WD-6, and UL498, UL544
UL File #E33208 Guide QCM2
CSA Certified
Meets NEC requirements for “Wet & DampLocations”
Meets OSHA requirements
CATALOG NUMBER AMP VOLTS NEMA DESCRIPTION
6500BRY 15A or 20A — Cover and seal, excludes receptacle, for use with straight blade single 15 and20A 125/250 volt and locking 15 Amp receptacles
60W47BRY 15A 125V 5-15R Cover, seal, and receptacle assembly
65W47BRY 20A 125V 5-20R Cover, seal, and receptacle assembly
6700BRY 20A or 30A — Cover and seal, excludes receptacle, for use with 20A and 30A locking single receptacles, 3-wire only
67W47BRY 20A 125V L5-20R Cover, seal, and receptacle assembly
6800BRY 20A or 30A — Cover and seal, excludes receptacle, foruse with 30A locking single receptacles, 4-wire
Specifications are subject to change without notice.
1.85(47.0)
3.30(83.8)
3.14(79.8)
4.64(117.9)
WEATHER PROTECTIVE COVER
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
I15
Features - SpecificationsProvides for temporary power distribution onjob sites and maintenance
Non-conductive, non-metallic boxes reducethe exposure to potential hazards
Molded of impact resistant ThermoplasticElastomer
Resistance to oils and solvents
Heavy-duty stainless steel springs
Available in extra deep sizes
Operating temperature: -20°C to 65°C
Comply with NEMA standards WD-1, WD-6,and UL498, UL544
UL File #E2258 Guide RTRT
CSA Certified
Meets OSHA requirements
DUST-TIGHT SERIESAutomatic centering strain relief cord clamps
Provides for dust resistant, IP45environments
WATER-RESISTANT SERIESFlip seals provide for protection against wetenvironments when closed
Supplied with neoprene seal bushings toaccommodate cord size #16/3 SO to #12/3 SO
Receptacles sold separately. See Sections B & H.Specifications are subject to change without notice.
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
Single-Gang, Dust-Tight and Water-ResistantPortable Outlet Boxes
3085BRY
3000BRY
3005BRY
CATALOG NUMBER BOX DEPTH SIZE DESCRIPTION
3000BRY 3.16" (80.3) Dust-tight, standard box
3080BRY 4.17" (105.9) Dust-tight, standard box
3005BRY 3.16" (80.3) Water-resistant, standard box
3085BRY 4.17" (105.9) Water-resistant, extra deep box
3017BRY — Replacement duplex flip cover
3018BRY — Replacement single receptacle flip cover
3019BRY — Replacement GFCI flip cover
2.50(63.5)
4.00 (101.6)4.71 (119.63)
StandardDepth Box3.16 (80.3)
Extra DeepBox
4.17 (105.9)
2.50(63.5)
4.00 (101.6)4.71 (119.63)
StandardDepth Box3.16 (80.3)
Extra DeepBox
4.17 (105.9)
To be discontinued when supplies are exhausted.Specifications are subject to change without notice.
Weather Protective Boots
5200BCR
7460BP, 7460BC
5200BPB, 5200BSRB, 5200BCB
7400BCR
WEATHER PROTECTIVE BOOTSCATALOG NUMBER DESCRIPTION
5200BP Yellow thermoplastic elastomer boot for use with 15 amp nylon locking and straight blade plugs
5200BC Yellow thermoplastic elastomer boot for use with 15 amp nylon locking and straight bladeconnectors
5200BSR Yellow thermoplastic elastomer sealing ring for use with 5200BC connector boot
5200BPB Black thermoplastic elastomer boot for use with 15 amp nylon locking and straight blade plugs
5200BCB Black thermoplastic elastomer boot for use with 15 amp nylon locking and straight blade connectors
5200BSRB Black thermoplastic elastomer sealing ring for use with 5200BCB connector boot
5200BCR Yellow neoprene boot for use with 15 amp nylon locking plugs and connectors
7400BCR Yellow neoprene boot for use with 2-pole 2-wire straight blade nylon plug and connector and nylon midget locking plugs and connectors. NEMA 1-15, ML-2 and ML-3
7460BP Black thermoplastic elastomer boot for use with 7465N plug when used with 7464N connector or 7468N female equipment receptacle. Also for use with connector when used with 7466N male base.
7460BC Black thermoplastic elastomer boot for use with 7464N connector when used with 7465N plug
Features - SpecificationsWEATHER PROTECTIVE BOOTS (5200 BP,BC and BSR Series) For use with Bryant Tech-Spec® and
5900 Series straight blade plugs and connectors
Help prevent moisture, dust and other contaminants from infiltrating plugs and connectorsAvailable in high-visibility yellow or standard black
Thermoplastic elastomer ConstructionExcellent ozone and weatherresistance
Resistant to deterioration by oils and heatConnector sealing ring provides extra protection when plug and connector are not matedRibbed exterior provides firm grip
ADAPTER SLEEVESCATALOG NUMBER DESCRIPTION
5200S Rubber adapter sleeve, strain relief, black, for Triple-Gripper nylon plugs and connectors
9700SRubber adapter sleeve, strain relief, white, for use with 2-pole 2-wire straight
blade nylon plug and connector and midget locking nylon plugs and connectors.NEMA 1-15, ML-2 and ML-3
I16
See pages H-18, H-20, H-34 and H-36.See pages H-19, H-21, H-35 and H-37.See pages I-8 and I-9.
Specifications are subject to change without notice.
Weather Protective Boots
72002BP, 72002BSR, 72002BC
7717N, 510BSR, 7717N
7716CR, 7717CR
72002M
7715CR
WEATHER PROTECTIVE BOOTSCATALOG NUMBER DESCRIPTION
72002BPB Black neoprene boot for use with 20 and 30 amp nylon locking plugs72002BP Yellow neoprene boot for use with 20 and 30 amp nylon locking plugs
72002BCB Black neoprene boot for use with 20 and 30 amp nylon locking connectors72002BC Yellow neoprene boot for use with 20 and 30 amp nylon locking connectors
72002BSRB Black neoprene sealing ring seals connector72002BSR Yellow neoprene sealing ring seals connector
72002M Yellow neoprene boot with threaded nonmetallic sealing ring for use with 20 and 30 amp nylon locking connector when used with 70520MPI and 70530MPI power inlets
7716B Black elastomer weather protective boot for 50 amp plugs when used in acord set, and connectors when used with flanged inlets
7717B Black elastomer weather protective boot for 50 amp connectors when usedin a cord set
7717N Yellow boot, vinyl-based compound for use with 50 amp N Series lockingplugs and connectors
510BSR Black sealing ring seals N Series plug and connector boots
7716CR Yellow neoprene boot for use with corrosion-resistant 50 amp armored locking plugs (when used with receptacle). Also, 50 amp armored locking connector (when used with male base, or plug with 7717CR long boot)
7717CR Yellow neoprene boot for use with corrosion-resistant 50 amp armored locking plug (when used with connector)
7715CR Yellow neoprene boot with threaded chrome-plated brass sealing ring for use with corrosion-resistant 50 amp connector when used with 6372CR and6374CR power inlets
Features - SpecificationsWEATHER PROTECTIVE BOOTS (72002Series)
Help prevent moisture, dust and other contaminants from infiltrating plugs and connectors
Chemical/UV-resistant neoprene construction
High-visibility yellow
Ribbed exterior provides firm grip
Sealing ring seals connector when not mated
Cat. #72002M has non-metallic sealing ring for use with marine shorepower inlets
For use with Bryant Triple-Gripper 20 and 30 amp nylonplugs and connectors
7716B, 7717B
I17
Catalog Numbers 23007 and 7770 have lacquer finish. “CS” 50 amp locking receptacles require this cover. Outline drawing is shown on page I-19.
See page I-19 for additional information on Weather Protective Inlet & OutletCovers.Specifications are subject to change without notice.
FRONT SIDE BACK7770
4510D
Features - SpecificationsRugged die-cast aluminum construction with gray epoxy finish provides excellent corrosion resistance
Self-closing lift lid cover with heavy-duty stainless steel springassures maximum weatherproof protection
All weatherproof covers are furnished complete with nickel-plated brass mounting screws, (except catalog numbers23007 and 7770 furnished withstainless steel mounting screws).
F.S. and F.D. box mounting
UL Listed, wet, damp and dry locations with cover closed
Industrial Weatherproof Covers
CATALOG NUMBER APPLICATION
4510B Duplex receptacle opening4510D GFI/Fashion NEMA 1.3" (33.0) x 2.6" (66.0) opening7418B 1.40" (35.6) dia. opening, 15 and 20 amp single receptacle7420B 1.62" (41.1) dia. opening, 20 and 30 amp locking receptacle7427B 2.15" (54.6) dia. opening, 30 and 50 amp, 3-wire power receptacles7429B 2.31" (58.7) dia. opening for “MBWP” inlets7770 50 amp standard locking receptacles23007 20 amp power interrupting, locking receptacles20405 30 amp power interrupting, locking receptacles
INDUSTRIAL, CAST ALUMINUM OUTDOOR PLATES, VERTICAL, F.S. MOUNTING
5210B Duplex receptacle, device mounted5211B Duplex receptacle, F.S. mounting
HORIZONTAL F.S. AND DEVICE MOUNTING
7774CR 50 amp “CS” or standard locking receptaclesINDUSTRIAL, POLYCARBONATE OUTDOOR PLATE, VERTICAL, F.S. MOUNTING
7418B 7420B 7427B 7770/7774CR 7774CRRECOMMENDED WEATHER PROTECTIVE COVERS
23007
7420B
4510B
55652615251566153615351546147104760758273108210
83107250528452585684538454845261IG5361IG753570615FR
70520FR70620FR70720FR70820FR70920FR70530FR70630FR70730FR70830FR70930FR71020FR71120FR71220FR71030FR71130FR
71230FR71330FR71420FR71520FR71620FR71430FR71530FR71630FR71730FR71820FR71920FR72020FR71830FR71930FR72030FR
72120FR72220FR72320FR72130FR72230FR72330FR333034303520741040045FRFSL1FRFSL2FRFSL3FRFSL4FR
9530FR9630FR930393069550FR9650FR
3771737937696369CR6370CR
CS6369CS6370CS8169CS8269CS8369CS8469CS6369NCS6370NCS8169NCS8269NCS8369NCS8469N
2.81 (71.4)
4.67(118.6)
.86(21.8)
1.88 (47.8)
3.25(82.6)
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
I18
Flanged inlets and receptacles sold separately.Specifications are subject to change without notice.
7774CR
6083CR6084CR
6080 CATALOG NUMBER DESCRIPTION6080 Black phenolic F.S. box with two 3/4" (19.1) threaded knockouts
6087 Black phenolic blank cover for F.S. and F.D. boxes with gasket and stainless steel mounting screws
6083CR Yellow fiberglass F.D. box with two 3/4" (19.1) threaded knockouts6084CR Yellow fiberglass F.D. box with two 1" (25.4) threaded knockouts6075CR Adapter plate, used to mount power inlets to F.S. and F.D. boxes
7774CR Yellow fiberglass weather-protective plate with lift lid for 50 amperereceptacles, fits F.S. and F.D. boxes
WPC1 Weatherproof cover for use with 15A locking flanged equipment devices (inlets and receptacles)
WPC2 Weatherproof cover for use with 20A and 30A locking flanged equipment devices (inlets and receptacles)
Nonmetallic Conduit Boxes,Covers and Accessories
Features - SpecificationsCONDUIT BOXES AND COVERS (6080, 6087)
Heavy-duty phenolicconstructionSuitable for wet or damplocations
MARINE DOCKSIDE BOXES (6083CR,6084CR)
Rugged fiberglassconstructionAvailable with 3/4" (19.1) or 1" (25.4) threaded knockoutsHigh-visibility yellow22-cubic inch capacity
WEATHER PROTECTIVE COVER (7774CR)Rugged polycarbonateconstructionHigh-visibility yellowStainless steel screwsNeoprene gasket
6083CR/6084CR
3.25(82.6)
1.87 (47.5)
3.28(83.3)
4.56(115.8)
2.90 (73.7) 3.25 (82.6)
6080
3.25(82.6)
1.87 (47.5)
3.28(83.3)
4.48(113.8)
2.78 (70.6) 2.78 (70.6)
7774CR
6087
4.46(113.3)
2.75 (69.9)
1.87 (47.5).35 (8.9)
GA
SK
ET
4.56(115.8)
3.25(82.6)
2.84 (72.1)
.188 (4.8) DIA. THRU(4) HOLES 1.88 (47.8)
2.40 (61.0)
6075CR
3.25(82.6)
1.87 (47.5)
2.38(60.5)
2.38 (60.5)
.19 (4.8) DIA.
.28 (7.1) C’SINK(4) HOLES
#8-32(4) HOLES
.10(2.5)
PRODUCT DIMENSIONS – ( ) Indicates mm dimensions
I19
CATALOG NUMBER USE WITH FLANGED INLETS & FLANGED RECEPTACLES LISTED BELOW
WPC1 4716MB, 4715ER, 70615MB, 70615ER, 4786MB, 4785ER, 7556MB,7557ER, 8808, 880970520MB, 70520ER, 70620MB, 70620ER, 70720MB, 70720ER, 70820MB,70820ER, 70920MB, 70920ER, 70530MB, 70530ER, 70630MB, 70630ER, 70730MB, 70730ER, 70830MB, 70830ER, 70930MB, 70930ER,7327, 7328, 71020MB, 71020ER, 71120MB, 71120ER, 71220MB, 71220ER,71030MB, 71030ER, 71230MB, 71230ER, 71330MB, 71330ER, 71420MB,
WPC2 71420ER, 71520MB, 71520ER, 71620MB, 71620ER, 71430MB, 71430ER,71530MB, 71530ER, 71630MB, 71630ER, 71730MB, 71730ER, 7408, 7409, 71820MB, 71820ER, 71920MB, 71920ER, 72020MB, 72020ER, 71830MB, 71830ER, 71930MB, 79130ER, 72030MB, 72030ER, 72120MB, 72120ER, 72220MB, 72220ER, 72320MB, 72320ER, 40045MB, 40045ER, 72130MB, 72130ER, 72230MB, 72230ER, 72330MB, 72330ER
WPC1
WPC2
WPC1, WPC2
4.56(115.8)
3.25(82.6)
2.84 (72.1)
.188 (4.8) DIA. THRU(4) HOLES 1.88 (47.8)
1.22(31.0)
WPC2 w/70520ER
Specifications are subject to change without notice.
BRYANT MARINEShip to Shore
7420B 70530FRCR
70530NPCR 72002BP
30 Amp 125V NEMAL5-30
7774CR 6370CR
530MCS, 50 Ft. Cord Set530MCS25, 25 Ft. Cord Set
6361CR 7716CR
50 Amp 125V
7774CR 6369CR
6365CR 7716CR
50 Amp 125/250V
DOCKSIDE
I20
Connections
70530MPI
6372CR
72002M 70530NCCR
7715CR 6360CR
6374CR7715CR 6364CR
BOAT
WIRING DEVICES
I21