Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
SEISMICMONITORING & PROTECTION SYSTEMS
PRODUCT GUIDE
SEISMICMONITORING & PROTECTION SYSTEMS
PRODUCT GUIDESeismic Transducers & Switches
Nuclear Infrastructure ProtectionStructural & Environmental Monitoring
Data Capture & Analysis
25YEARS1978 -2003
For over twenty five years Sensonics instrumentation has been used throughoutindustry for the monitoring of both seismic and structural vibration events. Weare the leading supplier of Seismic Monitoring and Protection systems to the UKNuclear Industry. Whether the requirement is for a single transducer or a fullycustomised multi-location monitoring system, Sensonics can provide the solution.
The Sensonics range of industry proven high quality transducers, equipment and services include:-
PROTECTING INDUSTRYWORLDWIDE
Frequency Response down to 0.1HzAcceleration Sensitivities up to 50V/gVelocity Sensitivities up to 2000V/m/sDynamic Range >120dBLinearity better than 0.1%Hermetically SealedCross Axis Sensitivity <1%Voltage or Current Outputs-30ºC to +140ºCATEX ‘Intrinsically Safe’ Versions
The SP series of Piezoelectric Transducers arerobust, portable, sealed instruments suitable foroperation in any attitude without modification.The SP4 unique inertial system of matchedpiezoelectric elements arranged in a reciprocalconfiguration generates high output sensitivityand minimum noise with a capability for com-plete transducer verification through an inputcalibration facility.
Outputs proportional to ground accelerationor ground velocity are available with sensitivi-ties of up to 50V/g.The sealed stainless steelcasing makes the instruments particularly suitedfor field operation and with the optional water-proof connector, for underwater applications.
Available in single axis and three axis (X,Y & Z) configurations.
SP Series of Low Frequency Piezoelectric Seismic Transducers
Wilmore MkIII Seismometer RangeSP Series of Piezoelectric TransducersSA Series of Triaxial Seismic Protection SwitchesMulti-Channel Voting Rack SystemsEvent Recorder EquipmentAlarm and Annunciator Rack SystemsReplay and Analysis SoftwareCustomised Seismically Qualified Cubicle EquipmentTurnkey System Design and ImplementationInstallation and CommissioningMaintenance and Support ServicesCalibration and Refurbishment
The SA series of seismic safety switches are fundamentally triaxial vibration detection devices, suitable for theprotection of vulnerable structures from ground bornevibration events. The unit features three high sensitivitylow noise seismometers in combination with high integrityalarm circuitry mounted in a robust weatherproof steelenclosure. The series are seismically qualified and featurean optional 2 out of 3 voting system.
When the vibration signal on any axis exceeds the setalarm threshold, the seismic alarm relays are activated,permitting further alarm processing for the safe shutdownof equipment.The switch can also be configured toprovide a robust current loop output for each of the threeaxes of detection representing the measured seismicwaveforms.
Utilising the SP4 seismic transducer permits full in-servicetesting and performance verification.
Measurement Range 0.1Hz to 100HzActuating Sensitivity 0.005g to 0.5gDynamic Range 90dBSensors Triaxial SP4Power Supply 230Vac, 110Vac or 24VdcProtection IP66, Optional Weather Shield AvailableCalibration Internal or External Oscillator, 20Vpk-pk, 1Hz StdAlarm Interface Seismic Event Relay,Transducer Integrity Relay Contact Rating 220V AC/DC at 2ASeismic Qualification IEEE Std 344-1987EMC Approval EN61326 (Heavy Industrial Standard) and Def Stan 59-41Applications Nuclear Power Plants, Oil Exploration & Mines, Large Structural Monitoring
SA SERIES OF SEISMIC SAFETY SWITCHES
Sensonics are the leading supplier ofSeismic Monitoring and Protection systemsto the UK Nuclear Industry. We offer arange of equipment, which can be scaled tomeet the most complex requirements.Integrity and robustness is key to oursystem concept, offering protected powersupply configurations, custom indicationpanels, as well as alarm voting racks suitablefor safety critical applications. The systemsprovide a secure and extremely dependableseismic alarm to the site operational staff,allowing rapid shutdown of plant processesin a controlled manner.
The key system components areas follows:-
NUCLEAR INFRASTRUCTUREPROTECTION
Voting Rack - Offering multi-channel ‘two out of three’ alarm voting.Utilising either robust electromechanical devices or triplicated programmablelogic with self-fault diagnosis.
Recorder – Robust PC with embedded operating system, contains on boardnon-volatile memory for program operation and event data storage.
Annunciator – For local alarm indication and reset facilities. Key operatedinterlocks and alarm defeat facilities provide additional system robustness.
Calibrator – Activates individual transducer self test facility for completesystem integrity check.
UPS – Typically configured in a dual redundant PSU configuration andavailable with various hold up times dependant on system load.
Qualifications - Seismic qualification to IEEE Std 344-1987, EMC approvalto Def Stan 59-41
Through development of our establishedtechnologies proven in the nuclear industry, incombination with our sensor expertise,Sensonics can offer smart solutions for thevibration monitoring of civil structures.Thisincludes facilities to meet the environmentalstandards required for both building and humanvibration recording, to BS7385, BS6472 and DIN 4150.
Available with alarm voting for shutdownapplications, the system offers maximumflexibility with remote access to view event dataonline and configure system parameters.
STRUCTURAL & ENVIRONMENTALMONITORING
Facilities
Acceleration and PPV RecordingAlarm Voting with multiple trigger levelsFTP Access to Event FilesSummary Event LogRemote System ConfigurationMultiple SMS Messaging of event dataLocal Alarm InterfaceFFT and 3rd Octave analysisVideo Capture on AlarmSelf Test Facilities0.1Hz to 300Hz Bandwidth90dB Dynamic RangeRack Mount and UPS options available
Applications
Construction Vibration MonitoringBridges and Railway InfrastructureLarge Civil StructuresEarthquake MonitoringTunnelsOil and Gas PipelinesLifts
Sensonics can offer a number of software solutions for the capture and analysisof seismic event data, providing analysis in both the time and frequency domains.Embedded operating systems can be supplied to cater for the most severeapplications, as well as protected processor and data storage configurations.
Inherent in our software systems are facilities to configure multiple alarm levels,setup alarm logic, adjust recording period (pre and post trigger), define alarmaction and self-test. Customised software solutions to meet bespoke systemrequirements can be generated from our standard solutions.
DATA CAPTURE AND ANALYSIS
Contact our experienced project and engineering team to discuss your requirements.
Remote SupportCustomised Equipment Design24 hour SupportContract Management
Data Collection and AnalysisInstallation and CommissioningMaintenance and CalibrationStrategic Spares Holding
The Complete Solution
From our offices in the UK, Sensonics can offer ‘through life’ systemsupport in addition to robust seismic system supply. This includes:-
The Willmore MkIII range of Seismometersare velocity sensing devices suitable forfield, vault or observatory use. Available inboth broadband and short periodconfigurations, the MkIII sets a standardthat is hard to beat.
The mass is a permanent magnetsuspended on ligament springs, whichachieves frictionless axial movement.Theoutput is derived from two coils fixed tothe frame, one at each end of the mass.Auxiliary coils are provided for feedbackand calibration. The natural period ofoscillation of the mass is adjustable so thatthe instrument can be optimally matchedto the required operating conditions.
The broadband response is achieved byadding a low noise capacitive displacementtransducing system to the basic MkIIIsuspension.A current proportional to themass displacement is fed back to the‘moving coil’ to maintain the mass atequilibrium. Adjustable electronic feedbackdamping is included to give the user,besides the noise reduction of thetechnique, an instrument capable ofdetecting earth motion from the micro-seismic to the strong motion range.
GEOPHYSICAL PRODUCTS
Dynamic Range 140dB
Noise Level 10-9 m/s2 per root Hz
Movement Range +/- 2mm ultimate
Temperature Range -40ºC to 50ºC
Sensitivity Variation Less than 1%Over Temperature
Inertial Mass 1.2Kg
Housing Polished Stainless Steel
Auxiliary Coils 10Kohm Primary, 500ohm Secondary
Mass can be clamped for transportation and positionadjusted from outside of sealed case.
Standard Output Responses Available:-
Acceleration - DC to 25Hz, 104 V/m/s2
Broadband Velocity - 20s to 20Hz, 105 V/m/s2
Long Period Narrow Band - 2x106 V/m/s2 at 20sShort Period - 5x106 V/m/s2 , 1s to 3s
Willmore Mk III