Upload
others
View
15
Download
1
Embed Size (px)
Citation preview
SELF ASSESSMENT REPORT (SAR)For Accreditation of UG Engineering Program
BE –
National Board of Accreditation
SAMRAT ASHOK TECHNOL(A Grant in-aid Autonomous Engineering
(Approved from AICTE and Affiliated to RGPV & Barkatullah University, Bhopal)
NAAC Accreditated, UGC Autonomous
(An Autonomous Institute declared by RGPV, BU and Full fledged Autonomy by UGC)
Registrar : 251083, 250744, 250741
E-mail : [email protected]
Steno to Director :
1
SELF ASSESSMENT REPORT (SAR)For Accreditation of UG Engineering Program
– Mechanical Engineering (Tier- 1)
Submitted to
National Board of Accreditation
New Delhi
By
SAMRAT ASHOK TECHNOL OGICAL INSTITUTEaid Autonomous Engineering College Estd. in 1960)
(Approved from AICTE and Affiliated to RGPV & Barkatullah University, Bhopal)
NAAC Accreditated, UGC Autonomous
(An Autonomous Institute declared by RGPV, BU and Full fledged Autonomy by UGC)
Vidisha (M.P.)
: PHONES :
STD Code : (07592)
251083, 250744, 250741 E-mail : [email protected]
[email protected] Website : www.satiengg.in
Steno to Director : 250121 Fax : 250124
SELF ASSESSMENT REPORT (SAR) For Accreditation of UG Engineering Program
1)
OGICAL INSTITUTE
College Estd. in 1960)
(Approved from AICTE and Affiliated to RGPV & Barkatullah University, Bhopal)
(An Autonomous Institute declared by RGPV, BU and Full fledged Autonomy by UGC)
www.satiengg.in
250124
2
SAMRAT ASHOK TECHNOLOGICAL INSTITUTE (Engineering College)
Vidisha (M.P.)
SAR Contents
Serial Code &
Link to the Item Item Page No.
PART A Institutional Information 02
PART B Criteria Summary 09
Program Level Criteria
1 Vision, Mission and Program Educational Objectives 10
2 Program Curriculum and Teaching – Learning Processes 16
3 Course Outcomes and Program Outcomes 33
4 Students’ Performance 57
5 Faculty Information and Contributions 83
6 Facilities and Technical Support 138
7 Continuous Improvement 146
Institute Level Criteria
8 First Year Academics 161
9 Student Support Systems 168
10 Governance, Institutional Support and Financial Resources 176
PART C Declaration by the Institution 190
3
PART A: Institutional Information
1. Name and Address of the Institution : Samrat Ashok Technological Institute (Engineering College), Civil Line, Vidisha (M.P.) 464 001
2. Name and Address of the Affiliating University
: Rajiv Gandhi Prodyogiki Vishwavidhyalya Airport Bypass Road, Gandhi Nagar, Bhopal, Madhya Pradesh 462036
3. Year of establishment of the Institution : 1960
4. Type of the Institution :
Institute of National Importance :
University :
Deemed University :
Autonomous : Year of Autonomy - 2010
Any other (Please specify) :
Note :
1. In case of Autonomous and Deemed University, mention the year of grant of status by the authority.
2. In case of University Constituent Institution, please indicate the academic autonomy status of the Institution as defined in 12th Plan guidelines of UGC. Institute should apply for Tier 1 only when fully academically autonomous.
5. Ownership Status :
Central Government :
State Government :
Government Aided :
Self financing
Trust
Society :
Section 25 Company
Any other (Please specify) :
√√√√
√√√√
4
Provide Details: The Institute "Samrat Ashok Technological Institute" is established by Maharaja Jiwaji Rao
Education Society (MJES) on November 1, 1960 under the open door policy of Government of India. The society constituted a Board of Governors (BOG) which governs the Institute as per the rules, regulation of Government of India, State Government and AICTE. A managing committee has been constituted by the BOG to take decisions on behalf of the BOG.
Following are the members of the society:
S.N. Name Designation
1. Shrimant Shri Jyotiraditya M. Scindia President
2. Sh. Motilal Vora Vice President
3. Minister Technical Education MP Govt. Member
4. Dr. Laxmikant Markhedkar Secretary
5. Er. Ramesh Agrawal Treasurer
6. Chairman Vidisha Municipal Council Member
7. Chairman Distt. Cooperative Bank Vidisha Member
8. Justice (former ) N.K.Modi Member
9. Sh. Prashant Mehta (IAS retd.) Member
10. Sh. Bimal Julka IAS Member
11. Dr. K.K. Agrawal, Founder Vice-Chancellor of Indraprastha University
Member
12. Sh. Bharat C Chhaparwal, Ex-Vice-chancellor, DAVV, Indore Member
13. Sh. Mahendra Sethia Member
14. Dr. Anoop Raj Member
15. Sh. Abhilash Khandekar Member
16. Sh. Virendra Bapna Member
17. Smt. Ujjwala Phalke Member
18. Sh. Rajeev Markhedkar Member
19. Dr. Padam Jain Member
20. Sh. Laxmikant Agrawal Joint Secretary
The function for which the society is established are: 1. To administer and manage the funds which may be received from time to time from any
sources what so ever for establishing institutions at Vidisha (Bhilsa) or elsewhere for imparting of technical, vocational or other type of education.
2. To establish and run an institution or institutions for imparting technical education in Civil, Mechanical, Electrical, Electronics, Computer Science, Information Technology, Telecommunication Engineering and other science & Technological subjects, to establish and run vocational and other educational institution.
3. To acquire either by purchase, exchange, lease, gift or otherwise and to hold, shell receive the purchase money of convey assign, lease exchange and administer and utilize all such property wholly and completely in furtherance of the aims and ends of the society and for the achievement of any other object what so ever.
5
4. To layout and prepare for building purposes of the society and lands, acquired by or leased to the society.
5. To erector procure the erection of buildings, of any and all kinds upon any such lands as aforesaid and to alter, pull down improve, decorate maintain, furnish and do any other works on or for or in respect of all or any building in which the society may be interested.
6. To aid in the establishment and support of association for the benefit of persons employed by the society of in any way connected with the society.
7. To invest or land money whether belonging or entrusted to the society upon such manner as may from time to time be determined by the society.
8. To raise money or mortgage or change or in such other manner as the society shall think fit and in particular by the issue of debentures charged upon all or in any of the property of the society both present and future.
9. To apply the income and property when so ever derived towards the promotion of the objects set out above.
10. To do all or any of the above things either along or in conjunction with others and to do all other such things as the society may consider necessary, incident or conductive to the attainment of the above objects.
11. To raise or borrow money as may be required from time to time for the purpose of the society.
6. Other Academic Institutions of the Trust/Society /Company etc., if any:
Name of the Institution(s) Year of Establishment Programs of Study Location
Samrat Ashok Technological Institute (Polytechnic)
1957 Diploma in Engineering Vidisha (M.P.)
Table A.6 7. Details of all the programs being offered by the institution under consideration:
S.No Programme Name of the Department
Year of Start
Intake Increase/ Decrease in intake, if any
Year of Increase /Decrease
AICTE Approval
Accreditation Status*
UG-Engineering 1. BE- Civil Engineering Civil 1960 60 Yes Accredited
2012-15 2. BE - Mechanical
Engineering Mechanical 1960 30 60 2001 Yes Not Accredited
1.23-25 Sept. 2011, 2.8-10 April 2015
3. BE- Electrical Engineering
Electrical 1960 30 60 2001 Yes Accredited 2012-15
4. BE- Electronics & Instrumentation
EI 1985 30 60 2001 Yes Accredited 2012-15
5. BE- Computer Science Engineering
CSE 1988 30 60 2001 Yes Not Accredited 1.23-25 Sept. 2011, 2.8-10 April 2015
6. B.E. Information Technology (merged with BE CSE)
CSE 2000 60 Yes Not Accredited 8-10 April 2015
7. B.E. Electronics and communication
EC 2000 60 Yes Not Accredited 8-10 April 2015
8. B.E. Bio Medical Engineering
BME 2002 60 Yes Not Eligible
9. B.E. Petrochemical Engineering
PCE 2011 60 Yes Not Eligible
6
PG-Engineering 10. M.E. Construction
Technology & Management
Civil 1997 18 Yes Not Eligible
11. M.E. Environmental Engineering
Civil 1999 18 Yes Not Eligible
12. M.E. Trasportation Engineering
Civil 2003 18 Yes Not Eligible
13. M.E. Advanced Production System
Mechanical 1993 18 Yes Not Eligible
14. M.Tech. Thermal Engineering
Mechanical 2004 18 Yes Not Eligible
15. M.E. Power Electronics
Electrical 1997 18 Yes Not Eligible
16. M.Tech CSE CSE 2001 25 Yes Not Eligible 17. M.E. Electrical
Machine Design Electrical 2003 18 Yes Not Eligible
18. M.Tech. Artificial Intelligence
CSE 2003 18 Yes Not Eligible
19. M.Tech. Cyber Security
CSE 2004 18 Yes Not Eligible
20. M.Tech. Digital Communication
EC 2011 18 Yes Not Eligible
Others Courses 22. Master in Computer
Application MCA 1988 30 60 2017 Yes --
23. M.Sc. Applied Chemistry
Chemistry 1972 25 Yes --
24. M.Sc. Applied Maths Maths 1972 25 Yes -- 25. M.Sc- Applied
Physics Physics 1993 20 25 2012 Yes --
26. M.Sc. Computer Science
Maths 1997 20 25 2012 Yes --
27 Master in Business Administration
MBA 2001 30 60 2012 Yes --
Table A.7 * Write applicable one:
Applying first time
o Granted provisional accreditation for two/three years for the period(specify period)
o Granted accreditation for 5/6 years for the period (specify period)
o Not accredited (specify visit dates, year)
o Withdrawn (specify visit dates, year)
o Not eligible for accreditation
o Eligible but not applied
Note: Add rows as needed. 8. Programs to be considered for Accreditation vide this application
S.No. Programme Name
1. B.E. Mechanical Engineering
2. B.E. Electronics & Instrumentation Engineering
Table A8
7
9. Total number of employees :
A. Regular Employees (Faculty and Staff):
Items CAY
(2017-18)
CAYm1
(2016-17)
CAYm2
(2015-16)
CAYm3
(2014-15)
Min Max Min Max Min Max Min Max
Faculty in Engineering M 42 42 42 43 43 43 43 47
F 06 06 06 06 06 06 06 06
Faculty in Maths, Science &
Humanities teaching in
Engineering Programs
M 09 09 09 09 09 09 09 09
F 04 04 04 04 03 04 03 03
Non-Teaching Staff M 57 57 62 62 55 55 55 55
F 10 10 16 16 16 16 17 17
Table A9a Note: Minimum 75% should be Regular/Full Time faculty and the remaining shall be
Contractual Faculty/Adjunct Faculty/Resource Source from industry as per AICTE norms and standards. The contractual Faculty will be considered for assessment only if a faculty is drawing a salary as prescribed by the concerned State Government for the contractual faculty in the respective cadre and who have taught over consecutive 4 semesters.
CAY – Current Academic Year CAYm1- Current Academic Year minus1= Current Assessment Year CAYm2 - Current Academic Year minus2=Current Assessment Year minus 1
B. Contractual Staff Employees (Faculty and Staff): (Not covered in Table A):
Items CAY
(2017-18)
CAYm1
(2016-17)
CAYm2
(2015-16)
CAYm3
(2014-15)
Min* Max Min Max Min Max Min Max
Faculty in Engineering M 31 45 32 35 30 37 35 43
F 17 20 18 18 17 18 19 22
Faculty in Maths, Science &
Humanities teaching in
Engineering Programs
M 02 04 02 02 03 03 03 03
F 01 01 01 01 01 02 02 02
Table A9b
* NPIU faculty is to added
8
10. Total number of Engineering Students: (i) Undergraduate-Engineering
Item CAY (2017-18) CAYm1 (2016-17) CAYm2 (2015-16)
Total no. of Boys 1583 1567 1537
Total no. of Girls 545 635 608
Total no. of Students 2128 2202 2145
Table A.10 (ii) Postgraduate-Engineering
Item CAY (2017-18) CAYm1 (2016-17) CAYm2 (2015-16)
Total no. of Boys 104 122 192
Total no. of Girls 50 76 113
Total no. of Students 154 198 305
Table A.10
(iii) Others (M.Sc., MBA and MCA)
Item CAY (2017-18) CAYm1 (2016-17) CAYm2 (2015-16)
Total no. of Boys 96 124 125
Total no. of Girls 111 110 107
Total no. of Students 207 234 232
Table A.10
(Instruction: The data may be categorized in tabular form separately for undergraduate,
postgraduate engineering, other program, if applicable) Note : In case the institution is running programs other than engineering programs, a separate
table giving similar details is to be included.
11. Vision of the Institution:
To contribute towards service and development of the mankind through quality education and research, in the area of science and technology and Management.
12. Mission of the Institution:
To create quality manpower equipped with technical skills ,social values, leadership, creativity and renovation for the benefit and betterment of mankind and sustainable development of the nation.
9
13. Contact Information of the Head of the Institut ion and NBA coordinator, if designated: i. Name : Dr. J.S. Chauhan
Designation : Director
Mobile No. : 9826244840
Email ID : [email protected]
ii NBA Coordinator, if designated
Name : Dr. Sanjay Katarey
Designation : Professor
Mobile No. : 9826050049
Email ID : [email protected] 14. General Information of the Institute
Samrat Ashok Technological Institute, a premier institute of the region, was established on November 1, 1960 under the “Open Door” policy of the Government of India, by Maharaja Jiwajirao Education Society, Vidisha with a donation from the Gangajali Trust Fund of the Scindias, erstwhile rulers of the Gwalior state, and commitment of non-recurring grants from the Government of India and the Government of Madhya Pradesh in agreed proportions.
The Institute has completed its 57 glorious years. During the last 57 years, the institute grew up in a big way. The institute which was started with 3 UG programmes in Engg., now offers nine undergraduate courses in Engineering (B.E.), eleven Post graduate courses in Engineering (ME/M.Tech.), Master of Computer application (MCA), Master of Business Administration (MBA), four P.G. courses in Applied Sciences, and Full Time/Part-time Ph.D. programmes with approx 3000 students. Institute has academic autonomy status, recently Institute has got NAAC accreditation also. Institute has well qualified, experienced & dynamic faculty to impart the high quality education in Engg./Technology, Science and Management. There are well equipped modern laboratories, well stocked Digital E-Library, sports facilities and other facilities to meet academic, Co-curricular extra-curricular activities, and other requirements. MHRD, Govt of India, New Delhi, has selected this institute under the World Bank Scheme TEQIP-III with financial assistance of Rs. 15.00 crores. The objective of the scheme is to establish Academic Excellence in the institute through various activities and enhance the employability of UG/PG students.
Since its inception, Institute has played a significant role in developing human resources to meet the requirement of industries with high social values at home and abroad.
Campus The college campus a few minute walk from the Railway station, is situated in Civil lines area of Vidisha a district headquarter. It spreads over 85 acres of lush green land with well maintained internal road and approaches, play ground, garden, administrative building, academic departments, workshop, hostels, residential quarters etc. Some of the highlights of the campus are:
• Well spread over 85 acres of lush green land with internal roads and approaches. • Total built-up area of the institute in 34463 Sq. m. • Embedded with all amenities required for a technical institute. • Houses sixteen academic departments, other supporting sections, workshop etc. • Residential zone for faculty and staff. • Three boys and two girls hostel + one girls hostel under construction. • Post office, Two Banks, ATM, Cooperative store, Canteen, Dispensary, Central Reprographic Centre. • Enclosed by RCC boundary wall • One guest house, one alumni Transit House • Indoor Auditorium of 600 capacity and open auditorium • Own 33 KVA/400 Volt power sub station • Overhead tanks, internal water supply pipeline, tube well etc. • Sports complex with all indoor and outdoor sports facilities • Round the clock security • Power backup with two 62.5 KVA and one 200 KVA Generator sets.
10
PART B: Criteria Summary
Name of the program _ BE Mechanical Engineering
Criteria No. Criteria Mark/Weightage
Program Level Criteria
1. Vision, Mission and Program Educational Objectives 50
2. Program Curriculum and Teaching –Learning Processes 100
3. Course Outcomes and Program Outcomes 175
4. Students’ Performance 100
5. Faculty Information and Contributions 200
6. Facilities and Technical Support 80
7. Continuous Improvement 75
Institute Level Criteria
8. First Year Academics 50
9. Student Support Systems 50
Governance, Institutional Support and Financial Resources 120
10.
Total 1000
11
PART B: Program Level Criteria
CRITERION 1 Vision, Mission and Program Educational Objectives 50
1.1. State the Vision and Mission of the Department and Institute (5)
Vision and Mission of the Institute VISION : To contribute towards service and development of the mankind, through quality
education and research, in the area of science , technology & management. MISSION : To create quality manpower equipped with technical skills, Social values, Leadership,
Creativity and Renovation for the benefits and betterment of mankind and sustainable development of the nation.
Vision and Mission of the Mechanical Engineering Department
VISION : To impart knowledge to our students in an ambience of Humanity, Wisdom, Intellect,
Creativity of Innovation, in order to nurture them culturally and Ethically rich professionals with bright future.
MISSION : M1 An integrative educational experience that blends fundamentals, research and hands-on
experience.
M2 Distinctive academic curriculum designed through the interaction with the major stakeholders like industry and professional societies.
M3 The state of the art facilities and effective delivery of high quality content by qualified faculties who ensure the motion of lifelong learning.
M4 Promotion of exchange of scholars and students with international and national academic and research institutions.
M5 Including a high regards for ethical principles and an understanding of human and environmental realities.
1.2. State the Program Educational Objectives (PEOs)
PEOs of the B. E (Mechanical Engineering) program are as following
PEO1To prepare the students for Successful professional careers with strong fundamental
knowledge in Science, Mathematics, English and Engineering Sciences so as to enable them
to analyze the Mechanical Engineering related problems leading to leadership,
entrepreneurship or pursuing higher education.
12
PEO2 To develop ability among the students for acquiring technical knowledge in specialized
areas of Mechanical Engineering with a focus on research and innovation and gaining the
technical skills in classical software packages
PEO3 To provide opportunities for the students to work with multidiscipline field of engineering
so as to enlarge the ability among the students to understand the different industrial
environments.
PEO4 To prepare strong foundation in academic excellence, soft skills, managerial skills,
leadership qualities, moral and ethical values and understand the need for lifelong learning
for a successful professional career.
1.3. Indicate where the Vision, Mission and PEOs are published and disseminated among
stakeholders (15)
Internal Stake Holders 1. Management - MJES (Maharaja Jivajirao Education Society) 2. Government of Madhya Pradesh 3. Faculty members 4. Non-Teaching Staff 5. Students External Stake Holders 1. Parents 2. Employers 3. Industry 4. Alumni 5. Various funding agencies like, AICTE, UGC, etc
1. The vision and mission of the institute is published in the Institutional website
(www.satiengg.in) and all the stakeholder’s and future Students can have the access.
2. The mission and vision displayed at prominent locations in the campus can be viewed by Students, parents, faculty members and others
3. For fresher’s, institute organizes orientation program in which they are given the Institutional profile
4. College Brochure
The Vision, Mission and PEO’s of the department are disseminated through:
1. Departmental Notice Board 2. Faculty’s rooms 3. Departmental Laboratories 4. Mechanical Engineering Department Website
(http://www.satiengg.in/Departments/Department_Home.aspx) 5. Class rooms & Tutorials rooms
13
6. Workshop 7. Seminar rooms 8. Department Library
1.4. State the process for defining the Vision and Mission of the Department, and PEOs of the
program (15)
.Following process were adopted in developing Departmental Vision and Mission statements:
1. SWOT analysis was conducted by considering internal stakeholders including management
and alumni. 2. Study of the basic aim, objective and theme of the vision and mission of the Institute.
3. On the basis of this, the department tried to develop vision and mission of the Mechanical Engineering Department.
4. The department circulated among the stakeholder to develop vision and mission of the Department.
5. Then, the committee headed by Head of the Department (HOD) finalized vision and mission of the Department.
Following process were adopted in developing the PEOs of the program:
1. Departmental meeting 2. Feedback from peer review
3. Feedback from industries
4. Feedback from students/ alumni
5. Feedback from training and placement department 1.5. Establish consistency of PEOs with Mission of the Department (10)
PEO Statements M
1
M
2
M
3
M
4
M
5
Justifications
PEO1To prepare the students for
Successful professional
careers with strong
fundamental knowledge in
Science, Mathematics,
English and Engineering
Sciences so as to enable
them to analyze the
3 1 2 3 1 M1 strongly support to achieve PEO1
as objective is to develop strong
fundamental knowledge , research
, and hand on experience
M2 slightly support to achieve PEO1 as
concern with distinctive academic
curriculum
14
Mechanical Engineering
related problems leading to
leadership, entrepreneurship
or pursuing higher
education.
M3 moderately support PEO1 as
concerned with faculties of lifelong
learning
M4 strongly support PEO1 as after
acquiring fundamental knowledge
from qualified faculties students
promote to higher studies
M5 slightly support PEO1 as concerned
ethical principles and an
understanding of human and
environmental realities
Overall, a department mission reasonably supports PEO1.
PEO2 To develop ability among
the students for acquiring
technical knowledge in
specialized areas of
Mechanical Engineering
with a focus on research
and innovation and gaining
the technical skills in
classical software packages
3 3 2 1 3 M1 strongly support PEO2 as after
acquiring technical knowledge and
skills students will be able to use it for
research and innovation.
M2 strongly support PEO2 as distinctive
academic curriculum will help
students to acquire knowledge in
specialized areas and use them for
research and innovation.
M3 moderately supports PEO2 as
lifelong learning helps students to
learn new technical skills.
M4 is slightly consistent with PEO2.
M5 strongly supports PEO2. Ethical
practices are required in research
and innovation.
PEO3 To provide opportunities
for the students to work
with multidiscipline field
of engineering so as to
enlarge the ability among
the students to understand
3 3 2 3 - M1 strongly support PEO3.
Fundamental knowledge and
hands on experience will enable
students to look for the
opportunities in multidiscipline
field.
M2 strongly supports PEO3. Distinctive
design of academic curriculum
15
the different industrial
environments.
helps the stake holders to explore
multidiscipline field of engineering.
M3 moderately supports PEO3. To
create industrial environment state
of the art facilities are required.
M4 strongly supports PEO3.
Collaboration with other national and
international institutes and industries
helps students do develop a
understanding about the research
environment of outside world.
PEO4 To prepare strong foundation in academic excellence, soft skills, managerial skills, leadership qualities, moral and ethical values and understand the need for lifelong learning for a successful professional career
- 3 - 2 3 M2 strongly supports PEO4 by
designing distinctive curriculum
students will be able to perform
well in the academics as well as in
the professional career.
M4 moderately supports PEO4.
Interaction with industries and
outside world helps students to
become better professional.
M5 strongly supports PEO4 since
ethical values and understanding
of human and environment
realities is required to become a
successful professional.
Note: M1, M2, . . Mn are distinct elements of Mission statement. Enter correlation levels 1, 2 or 3
as defined below:
1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High)
16
CRITERION 2 Program Curriculum and Teaching – Learning Processes 100
2.1. Program Curriculum (30)
2.1.1. State the process for designing the program curriculum (10)
Feedback
from alumni
and recruiters
Feedback from
student exit
meeting
PAC (Programme Assessment Committee)
� Monitors Attainments of POs and
PSOs
� Evaluate Program Effectiveness
DAC (Departmental Advisory Cell)
� Analyze the Suggestions from PAC
� Monitor the Progress of Programme
� Suggest Necessary Changes in Syllabus to Satisfy PEOs and Pos & PSO’s ; If require
BoS (Board of Studies)
� Review the Suggestion of DAC
� Recommend Change in Syllabus as Required
Academic Council
� Approve the Recommendation of BoS
17
2.1.2. Structure of the Curriculum (5)
I Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practicals
(P)
Total
Credits
(in hours)
ME 1721 Engineering Physics 3 1 2 6
ME 1722 Basic Civil Engg and Engg Mechanics 3 1 2 6
ME 1723 Basic Mechanical Engg. 3 1 2 6
ME 1724 Energy, Environment, Ecology and
Society
3 1 - 4
ME 1725 Engineering Maths-1 3 1 - 4
ME 1726 Computer Programming - - 4 4
ME 1727 Rural Outreach and Entrepreneurship - - 2 2
Total Credits 32
II Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practical
(P)
Total
Credits
(in hours)
ME 1711 Engineering Chemistry 3 1 2 6
ME 1712 Basic Electrical and Electronics Engg. 3 1 2 6
ME 1713 Engg. Graphics 3 1 2 6
ME 1714 Communication Skills 3 1 - 4
ME 1715 Engineering Maths-1 3 1 - 4
ME 1716 Workshop Practices - - 4 4
ME 1717 Introduction to Branch and Its
Opportunities
- - 2 2
Total Credits 32
18
III Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practical
(P)
Total
Credits
(in hours)
ME 1731 Machine Drawing and Design 3 1 2 6
ME 1732 Material Science 3 1 2 6
ME 1733 Strength Mechanics of Materials 3 1 2 6
ME 1734 Manufacturing Process -I 3 1 - 4
ME 1735 Fundamentals of Thermodynamics 3 1 - 4
ME 1736 CAD Lab - - 4 4
ME 1737 Seminar and Entrepreneurship - - 2 2
Total Credits 32
IV Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practical
(P)
Total
Credits
(in hours)
ME 1741 Applied Thermodynamics 3 1 2 6
ME 1742 Fluid Mechanics 3 1 2 6
ME 1743 Theory of Machines I 3 1 2 6
ME 1744 Machine component Design 3 1 - 4
ME 1745 Engineering Mathematics-III 3 1 - 4
ME 1746 Metal Cutting Machine Lab - - 4 4
ME 1747 Aptitude and Logical Reasoning - - 2 2
Total Credits 32
19
V Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practical
(P)
Total
Credits
(in hours)
ME 1751 Industrial Engineering and
management
3 1 2 6
ME 1752 Internal Combustion Engine 3 1 2 6
ME 1753 Mechatronics 3 1 2 6
ME 1754 Manufacturing Process -II 3 1 2 6
ME 1755 Industrial Organization and
Operations Management
3 1 - 4
ME 1756 CAE Lab - - 2 2
ME 1757 Minor Industrial Training - - 2 2
Total Credits 32
VI Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practical
(P)
Total
Credits
(in hours)
ME 1761 Automobile Engineering 3 1 2 6
ME 1762 Theory of Machine II 3 1 2 6
ME 1763 Turbo Machines 3 1 2 6
ME 1764 Manufacturing science 3 1 2 4
ME 1765 Operations Research 3 1 - 4
ME 1766 Minor Project - - 2 2
ME 1767 Technical and Professional Skill - - 2 2
Total Credits 32
20
VII Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practical
(P)
Total
Credits
(in hours)
ME 1171 Manufacturing Science and CNC
Machines 3 1 2 6
ME 1172 Operations Research 3 1 - 4
ME 1173 Heat and Mass Transfer 3 1 2 6
ME 1174 Power Plant 3 1 - 4
ME 1175 Elective I - - 4 4
ME 1176 Industrial training - - 4 4
ME 1177 Major Project-I 4 4
Total Credits 32
VIII Sem BE Mechanical
Course
Code
Course Title Lecture
(L)
Tutorials
(T)
Practicals
(P)
Total
Credits
(in hours)
ME 1181 Machine Design II 3 1 2 6
ME 1182 Refrigeration and air conditioning 3 1 2 6
ME 1183 Computer Integrated Manufacturing 3 1 - 4
ME 1184 Elective II 3 1 - 4
ME 1185 Major Project - - 8 8
ME 1186 GP - - 4 4
Total Credits 32
Table B.2.1.2
Total 256 credits
# Seminars, project works may be considered as practical
21
2.1.3. State the components of the curriculum (5)
Program curriculum grouping based on course components
Course Component
Curriculum Content
(% of total number
of credits of the
program )
Total number of
contact hours
Total number of
credits
Basic Sciences 9.4 24 24
Engineering Sciences 9.4 24 24
Humanities and Social
Sciences 4.7 12 12
Program Core 59.4 152 152
Program Electives 3.1 08 08
Open Electives 4.7 12 12
Project(s) 5.5 14 14
Internships/Seminars 3.9 10 10
Any other (Please
specify) - - -
Total number of Credits 256
Table B.2.1.3
22
2.1.4. State the process used to identify extent of compliance of the curriculum for attaining the
Program Outcomes and Program Specific Outcomes as mentioned in Annexure I (10)
• This institute is Grant –in-Aid an autonomous engineering college Institute has
been Accorded academic autonomy by Rajiv Gandhi Prodyogiki Vishwavidyalaya
vide letter No. F-5/RGPV/Academic/Autonomy/2011/59, Bhopal, Dated 07.01.2011
w.e.f. session 2010-11.
• Accorded autonomy by University Grant Commission, New Delhi vide letter No. F. 22-1/2015(AC), New Delhi, Dated 01.05.2015 w.e.f. session 2015-16.
• Accorded autonomy by Barkatullah University Bhopal vide letter No. 1618/Academic/Affiliation/2015, Bhopal, Dated 09.07.2015 up to 2020-21.
The course curriculum of Mechanical Engineering departmental has been developed by the department. Following is the process used to identify extent of compliance of curriculum for attaining the POs and PSOs.
• Identify Course Outcomes for each subject
• Map each Course Outcome with POs and PSOs • Based on All CO-POs/PSOs mapping, Map subject with POs and PSOs
• Categorize entire Curriculum into Core Courses, Science & Humanities, Programming, Inter Disciplinary, Projects / Lab Practices
• Map each category with POs and PSOs
S.No. Course Content Curriculum
Content (% of
total number of
credits of the
program)
Total no. of
Credits
PO’s
1 Basic Sciences 9.4 24 PO1, PO2, PO3,PO4,PO7,P10
2 Engineering Sciences 9.4 24 PO1, PO2, PO3,PO4,PO5,PO7,P10,P12
3 Humanities and
Social Science
4.7 12 PO6,PO7,P08,P09,P11,P12
4 Program Core 59.4 152 P01,P02,P03,P04,P05,P06,P07,P08,P09,P10,P11,P12
5 Program Electives 3.1 08 P01,P02,P03,P04,P05,P06,P07,P08,P0
9,P10,P11,P12
6 Open Electives
4.7 12 P01,P02,P03,P04,P05,P06,P07,P08,P0
9,P10,P11,P12
23
7 Project(s) 5.5 14 P01,P02,P03,P04,P05,P06,P07,P08,P0
9,P10,P11,P12
8 Internships/Seminars 3.9 10 PO7,P08,P09,P10,P11,P12
9 Any other (Please
Specify
- -
2.2. Teaching-Learning Processes (70)
2.2.1. Describe Processes followed to improve quality of Teaching & Learning (15)
• Department follows the academic calendar provided by the academic section of institute. It consists of the activities planned for the semester which includes internal test dates, laboratory and end examination schedules etc.
• Subject allotment is done well in advance for the staff members to prepare lesson plans, course plan, soft and/or hard copies of the lecture notes.
• E-learning facility (using NPTEL based Lecture CD, MOOCS) is made available for skill development of the Students.
• Experiments in the laboratories are conducted as per the syllabus of the subject. Some discussions are made beyond syllabus relevant to the course. Laboratory manuals explaining the details of the experiment are available with the course teacher and are given to students during the semester
• The faculty of department adopts various innovative Teaching & Learning methodologies to create the best learning environment for student. These methodologies include traditional chalk & talk methods, presentations, video lecturing, collaborative learning methods are used where every concept is explained with real world illustrations, design and problematic aspects.
• Faculties are now oriented towards Outcome based Education (OBE) and are actively utilizing the OBE to cater the learning needs of students by innovative ways.
• Lecture Session duration is 60 minutes. Laboratory duration is 180 minutes. • Assignments are given to students for their better performance.
• Invited talks and seminars on the current trends are done regularly from the industry persons and/or academia.
• Tutorial/Remedial classes are conducted to bridge the curriculum GAP as well as to support the slow learners based on their performance in external exams and after the first internals.
• Motivating and guiding students for higher studies and university ranks. • Industrial visits are conducted to reduce the gap between industry and institute.
• Workshops are organized to help the students to understand concepts beyond curriculum.
24
• Mentoring sessions are conducted to provide guidance to students towards achieving professional fulfillment and assessment of his/her academic progress as well as personal growth. One-one discussion, interaction between Professors and students has increased confidence levels of the students.
• Identification of bright and weak students. Motivate the weak students to attend tutorials and help them solve more problems. Encourage the bright students to attend more workshops and technical talks.
2.2.2. Quality of end semester examination, internal semester question papers, assignments
and evaluation (15)
(A) Internal Semesters Questions papers
• Internal semester question papers are prepared considering the standards of GATE, PSU entrance, and other institutions.
• Assignments are given to the students in such a fashion that they have to solve the problem themselves by self-learning methods.
• The Mechanical Engineering department conducts two internal assessment tests as per academic calendar.
• The tests are conducted for a maximum of 20 marks. • The duration of the test is one hour and question paper are set to make the student to learn
time management. • Blooms Taxonomy is followed while setting the internal exam question papers
(B) End Semesters Examinations
• While setting the question paper all previous university exam papers are taken into consideration.
• According to level of toughness the questions are prepared (viz., analyzing the problems, implementation of modern tools, formulating the problems etc), which is termed as Bloom’s Taxonomy.
• The questions will be of three categories:
• One third of the questions is straight and can be answered by all students.
• One third of the questions need analysis and use of content covered as per syllabus. • Remaining one third of the questions is not straight. Certain amount of thinking, analysis
and mathematical knowledge are required to resolve.
(C) Assignments:
• Assignment issue and submission dates are announced by the respective faculty members. • Assignment questions are prepared using Bloom’s Taxonomy process in relation with COs.
• In order to bridge the gap in curriculum, bright students are given some assignment beyond syllabus.
(D) Evaluation:
25
• The faculties after every internal assessment test they explain the solution of the questions in the class which will enable them to perform well in the final examination.
• For any genuine reasons, if a student was unable to perform well in the given two internal assessment tests, improvement test is given to him/her.
• The average of the marks obtained from best two tests is chosen for the award of internal assessment marks.
• If a candidate remains absent for all the tests conducted, the Internal assessment marks are marked as “Absent” in the result.
• Assignments are used as a tool for practice and evaluation is based purely on Internal Assessment Test
2.2.3. Quality of student projects (20)
• The student’s projects are selected in line with department mission, vision Program
outcomes & Program specific outcomes.
• Students are provided with brief idea of various fields for selecting the project ideas
• The faculties encourage the students to carry out in house projects and support will be
provided with all necessary software and hardware.
• The faculties encourage students to publish their project work in reputed
journals/conferences.
• Approach of project preparation is as follows;
• Students are briefed about the objectives, outcomes & specific outcomes of the projects
and steps to be followed.
• Selection of area in which students are interested to do the project.
• Literature survey
• Identification of Project
• Allotment of Project
• Manufacturing / Prototype making
• Collection of Data
• Analysis of Data
• Conclusion of the Project
• Future scope of work Project works are evaluated as per the schedule
Implementation
• A project coordinator is appointed by the Head of the department who is responsible for planning, scheduling and execution of all the activities related to the student project work.
• Timeline Task Particulars
26
SEMESTER SEVEN Timeline Task Particulars
12th week
Call for project batch
Students are invited to prepare their batch
and get it registered with the project
coordinator of the department. The student
submitting project titles are pre evaluated by
a team of experts
14th week Synopsis Submission The submitted project titles are reviewed by
a committee consisting of Project
coordinator, Head of the department and
experts
SEMESTER EIGHT Timeline Task Particulars
1st week Guide allotment
Guide will be allotted based on areas of
interest.
4th week First Review
Students are instructed to submit
requirement specification and give a
PowerPoint presentation for the project.
(Evaluation phase I by a team of faculty)
8th week Second Review
Students are instructed to submit Design
document of the project and give a
PowerPoint presentation for the project.
(Evaluation phase II by a team of faculty)
12th week
Final Demonstration
Students are instructed to submit complete
project report with university compliance
and give a PowerPoint presentation for the
project. (Evaluation phase III by a team of
faculty)
Project Relevance with POs and PSOs: Academic Year CAY – 2017-18
Sr Project Name Relevance with PO’s Relevance
27
No. with PSO’s
1. Design, Analysis and Fabrication of
an Automatic Tyre Inflation System
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
PSO1
2. Fabrication & Feasibility Report of
Electricity Generation by (Human
Powered) Gym Bicycle
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
PSO2
3. Fabrication of Hybrid Energy (Solar
Wind) Generation System
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
4. Design And Fabrication of Solar
Energy Driven Bucket Elevator
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
5. Design And Fabrication OF Air
Compressor
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
6. Design, analysis and fabrication of
auto stamp machine using Geneva
mechanism
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
PSO1
7. Design, Analysis And Fabrication of
Vortex Tube
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
8. Fabrication of Gearless Power
Transmission System In Angular
Positions
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
9. Hybrid Engine Technology And
Regenerative Braking System
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
10 Drag And Lift Estimation of
Convertible Drone By CFD
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
11. Gesture Controlled Robot PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
12. Robotic Hand PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
PSO1
13. Design Analysis And Fabrication of A
Constant Mesh Sliding Gears Axial
Force Transmission
PO1, PO2, PO3, PO4, PO5, PO6, PO7,
PO8, PO9, PO10, PO11, PO12
14. Fire Fighting Robot PO1, PO2, PO3, PO4, PO5, PO6, PO7, PSO1, PSO2
28
PO8, PO9, PO10, PO11, PO12
2.2.4. Initiatives related to industry interaction (10)
To strengthen interaction with industries and to keep our students updated with the latest trends in Mechanical Engineering, the Department has implemented following initiatives.
• Faculty members of department always keep contacts with the Training & Placement Office of this institute regularly. Special lecture on hi-tech area of mechanical engineering by experts from industries are conducted for exposing the industrial needs to the students.
• Students are permitted to take training at various industries.
• All students undertake summer vacation training in industries which is mandatory.
• Industrial visits along with the faculty members are arranged to bridge the gap between theoretical concepts and practical implications of the same.
• Department entered in to a MoU with Magdham Precision Engg. Dewas for the benefit of the mechanical engineering students.
List of Expert Lectures by Industry persons
S.No. Event Name of Organization Date
1 Expert Lecture on “Computer Aided Design (CAD) and its Industrial Application” Delivered by Mr. Manish Mayank Kashyap on dated 28.07.2017 at Eduset Room, SATI, Vidisha
Andvitz Hydro,
Bhopal
28.07.2017
2 Expert Lecture on “ Industrial Management” Delivered by Prof. Kripa Shankar, Professor from IIT Kanpur,(Ex VC, U.P. technical University Lukhnow)on 08.09.2017 at Class Room 221 SATI Vidisha.
IIT Kanpur 08.09.2017
3 Expert Lecture on “Industrial Management” Delivered by Prof. Sameer Khandekar, Professor from IIT Kanpur , Coordinator SIDBI Innovation & Incubation Center on 08.09.2017 at Class Room 221 SATI Vidisha.
IIT Kanpur 08.09.2017
4 Expert Lecture on “Design Scenario in Industry” Delivered by Mr. Avin Toank on 23.09.2018 at Smart Class Room SATI Vidisha
Toyo Engineering Ltd,
Mumbai
23.09.2017
5 Expert Lecture on “Additive Manufacturing (3-D Printing Technology)” delivered by Dr. Y.
NIT, Warangal 09.10.2017
29
Ravi Kumar from NIT, Warangal on 09.10.2017 at Smart Class Room SATI Vidisha
6
Expert Lecture on “Industrial Work Culture and Job Opportunities in Mechanical Engineering” delivered by Mrs. Shuruti Soni, at Smart Class Room SATI Vidisha
Cummins
Technologies, Pune
14.03.2018
List of Industry Visit by Mechanical Engineering Students
S.No. Name of Organizations Date of visit No. of Students
1 Subros Ltd. (Auto Refrigeration Mfg.
Co.) Phase – II NOIDA (UP)
8-12/03/ 2016 30 (Prefinal year
students)
2 Hero Moto Corp Gurgaon (HR) 8-12/03/ 2016 30 (Prefinal year
students)
3 New Holland Fiat Tractors India Ltd.
Greater NOIDA (UP)
8-12/03/ 2016 30 (Prefinal year
students)
4 Munjal Showa Ltd. (Shock Absorbers
Mfg. Unit) Gurgaon (HR)
8-12/03/ 2016 35 (Prefinal year
students)
5 Industrial visit to HEG Mandideep distt.
Raisen
22.07.2017 35 (Prefinal year
students)
6 Industrial visit to Magdham Precision
Engg., Dewas,
29.07.2017 35 (Prefinal year
students)
2.2.5. Initiatives related to industry internship/summer training (10)
• Training & Placement Cell identifies the organizations, suitable for Mechanical Engineering students and approach them to allow our students for internship/ summer training.
• Faculty members also arrange internships (through their personal contacts) for the students, in suitable organizations.
• The alumni coordinator constantly interacts with alumni those who are working in the industries and request them to provide necessary guidelines and supports for their junior’s internship.
• Some of the organizations where students are going for the internships/ summer training for CAY 2017-18 are appended below:
30
S.No. Name of Student Certification /
Training Details
Organization Duration Date
1 Anushi Singh Certificate Summer
Internship Utilization
of Wasted Activated
Carbon in Products in
our plant
HEG plant,
Mandideep
15 Days 13.05.2017
to
27.05.2017
2 Siddarth Sharma CG Power and
Industrial Solutions
Limited Vocational
Training
CG Power and
Industrial
Solutions
Limited
28 days 1st
May
2017 to
27th
May
2017
3 Ashessh Kurmi Completed the
Vocational/ Industrial
Training at Technical
Training Centre,
Coach Rehabilitation
workshop west
Central Railway,
Bhopal on
Productivity
Enhancement of
Carpentry shop
West Central
Railway,
Bhopal
28 days 01.05.2017
to
27.05.2017
4 Sarthak Tiwari Major Training
Certificate CI
Automotors Pvt. Ltd.
CI
Automotors
Pvt. Ltd.
Bhopal
30 days 18.05.2017
to
18.06.17
5 Sanskriti Gupta Certificate Vocational
/ Industrial Training at
Technical Training
Certre, Coach
Rehabilitation
Workshop, West
Central Railway
Bhopal
on Study of Gas
Manifold
West Central
Railway
Bhopal
28 days 01.05.2017
to
27.05.2017
31
6 Pragya Yadav Vocational/Industrial
Training at Technical
Training Centre,
Coach Rehabilitation
workshop west
Central Railway,
Bhopal
On Study of P.U.Paint
System & Shot
Blasting Process in
coaches
West Central
Railway
Bhopal
22 days 05.05.2017
to
27.05.2017
7 Sheetal Rai Certificate Vocational
training at Satpura
Thermal Power
Station, Sarni Distt.
Betul.
Satpura
Thermal
Power
Station, Sarni
Distt. Betul.
15 days 01.06.2017
to
15.06.2017
8 Akshay
Raghuwanshi
Certificate Diesel Loco
Shed Itarsi West
Central Railway at
Diesel Training Centre
Itarsi
West Central
Railway at
Diesel
Training
Centre Itarsi
13days 05-06-
2017 to
17-06-
2017
9 Amit Kori Certificate Diesel Loco
Shed Itarsi West
Central Railway at
Diesel Training Centre
Itarsi
West Central
Railway at
Diesel
Training
Centre Itarsi
13days 05-06-
2017 to
17-06-
2017
10 Ayush Pandey Training Certificate
Bharat Heavy
Electricals Ltd. Bhopal
Bharat Heavy
Electricals Ltd.
Bhopal
14 days 08.06.2017
to
21.06.2017
11 Anushi Singh Certificate Vacational
training at Satpura
Thermal Power
Station Sarni Distt.
Betul Two Weeks
Satpura
Thermal
Power
Station, Sarni
Distt. Betul.
15 days 01.06.2017
to
15.06.2017
12 Alpesh Jain Vocational training at
Satpura Thermal
Power Station,Sarni
Satpura
Thermal
Power
15 days 01.06.2017
to
32
Distt. Betul Station, Sarni
Distt. Betul.
15.06.2017
13 Ayush Pandey Completed 03 days
training program
on”Autombile Design
& Simulation
“Organized by
VIRTUALIS
MOTORSPORTS, at
Meerut Instutute Of
Engineering and
Technology. Meerut.
Meerut
Instutute Of
Engineering
and
Technology.
Meerut
03 days 24th
26th
June, 2017
14 Sahil Lodhi Training Certificate
Bharat Heavy
Electricals Ltd. Bhopal
Bharat Heavy
Electricals Ltd.
Bhopal
14 days 08.06.2017
to
21.06.2017
15 Shikha Jain Vocational / Industrial
Training at Technical
Training centre,
Coach Rehabilitation
Workshop, West
Central Railway
Bhopal
West Central
Railway
Bhopal
27 days 01.05.2017
to
27.05.2017
16 Sanskriti Gupta Internshala Student
Partner 7.0 program
with internshala
during the period
Gurgaon 06 Months March
2017to
August
2017
17 Durgesh
Vishwakarma
Certificate
Participated in
Combined annual
Training Camp on
National Cadet Corps.
Place Pachmari
Pachmari 09 days 20May to
29May
2017
33
CRITERION 3 Course Outcomes and Program Outcomes 175
3.1. Establish the correlation between the courses and the Program Outcomes (POs) &
Program Specific Outcomes (25)
Mechanical Engineering Department have twelve Program outcomes as defined by NBA and
two Program Specific Outcomes
1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering
fundamentals, and an engineering specialization to the solution of complex engineering problems.
2. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural sciences,
and engineering sciences.
3. Design/development of solutions: Design solutions for complex engineering problems and
design system components or processes that meet the specified needs with appropriate
consideration for the public health and safety, and the cultural, societal, and environmental
considerations.
4. Conduct investigations of complex problems: Use research-based knowledge and research
methods including design of experiments, analysis and interpretation of data, and synthesis of the
information to provide valid conclusions.
5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern
engineering and IT tools including prediction and modeling to complex engineering activities with an
understanding of the limitations.
6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess
societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the
professional engineering practice.
7. Environment and sustainability: Understand the impact of the professional engineering solutions
in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development.
8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of
the engineering practice.
9. Individual and team work: Function effectively as an individual, and as a member or leader in
diverse teams, and in multidisciplinary settings.
34
10. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports
and design documentation, make effective presentations, and give and receive clear instructions.
11. Project management and finance: Demonstrate knowledge and understanding of the engineering
and management principles and apply these to one’s own work, as a member and leader in a team,
to manage projects and in multidisciplinary environments.
12. Life-long learning: Recognize the need for, and have the preparation and ability to engage in
independent and life-long learning in the broadest context of technological change.
PROGRAM SPECIFIC OUTCOMES (PSOs)
PSO1 Extend and implement new thoughts on product design and development with the aids
of modern tools, while ensuring best manufacturing practices.
PSO2 An ability to become successful entrepreneur with necessary knowledge of start-up
and industrial management which contributes in nation building.
Program Articulation Matrix
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO.113 3 2.8 1.6 2.75 2 1 1
CO.123 3 2.75 1.5 1 1 1 1 1
CO.116 3 2 1 1.66 2 2 1
CO.331 2.25 2 2.5 2 2 2
CO.332 3 2 1.4 1.4 1 1 3
CO.333 3 2 2 2.5 1
CO.334 3 2 2 1 2 2
CO.335 3 2.5 2.66 2.5 1 1.5 1
CO.336 3 1 2 2 3 2 3
CO.441 2.2 2.4 1.4 2 1.33 1 1.33 1 1
CO.442 3 3 2 2.42 2
CO.443 2.6 2.6 2.4 2.6 1
CO.444 3 3 3 3 1 1 1 1
CO.445 3 2.8 2 2.4 1.6 2 1 2.2 1.4 2.6
35
CO.446 3 2 1 1
CO.447 2 2 1 1
CO.551 3 1.66 2 2.66 1.5 3 1 1 1.66 2.33 1.75 2
CO.552 2.2 2.2 2.4 1.6 1.4 1.8 1.6 2 1 1.75
CO.553 3 2 3 2.66 3 3 1.5
CO.554 2.33 1 1.5 2.5 2 2 2.33
CO.555 1 1 1 1 1 1 1 1 1 1
CO.556 3 2.4 2.4 2 3 1.66 3 1 3 3 2.33 1
CO.557 5 2 3 2 1.66 3 3 2 2.66
CO.661 2.6 1.8 1.75 1 1.66 1 1.66 1 1 1 1 1.5
CO.662 3 3 2.2 2.4
CO.663 2.6 2.33 2.75 2.5 3 2.33 2.75
CO.664 3 2.6 2 1.8 2 2.6 1.8 1.5 3 1.6 1.8 2
CO.665 3 1.75 1.25 2 2
CO.666 3 2.6 2.6 1.8 3 1.5 2 1.5 1.8 2 1.6
CO.771 3 2.6 2 1.8 2 2.6 1.8 1.5 3 1.6 1.8 2
CO.772 3 1.75 1.25 2 2
CO.773 3 2.75 2.25 2 1.5 1 1 1 1 1
CO.774 2.8 1.8 2 1.5 1.5 1 2 2 1 2
CO.775
(A)
3 1.8 2 2 1.5 1
1 1 1.5 2 1
CO.775
(B)
3 2.25 2 1.66 2 3 2
CO.881 3 2.2 2.4 1 3 1
CO.882 3 2 2.25 2 1 2 1
CO.883 3 2 2 1 1
CO.884 2.4 2 2.2 2.6 2.4 2.2 2.4 2.2 2 1.6 1.4 2
Table B.3.1a
36
Course Articulation Matrix
Semester III
ME-1731 Machine Drawing & Design
Course Outcomes: At the end of the course, the students will able to:
CO 1 Understand basics of Machine Drawing representation of various machine parts and
joints IS Codes
CO 2 Learn various design consideration for machine component design
CO 3 To do assembly drawing of machine parts and can analyse function of different
components in assembly
CO 4 Design various joints subjected to static load and suitability of various joints
Mapping of course outcomes with program outcomes:
PO 1 PO
2
PO
3
PO 4 PO 5 PO 6 PO
7
PO 8 PO 9 PO
10
PO
11
PO 12
CO 1 1 2 2 1
CO 2 2 2 2 2 1 1
CO 3 3 2 3 3
CO 4 3 2 3 2
ME1731 2.25 2 2.5 2 1 1
Semester IV
ME-1743 Theory of Machines – I
Course Outcomes: At the end of the course, the students will able to:
CO 1 Understand concepts of Mechanism, Machines linkage system, Kinematic Pair and
Kinematic Chain, inversions, degree of freedom
37
CO 2 Aanalyze velocity and acceleration of a point or a link in Mechanism
CO 3 Understand Gear mechanism, Gear terminology, meshing between Gears and analyze
force and Motion in gear trains
CO 4 Analyze stability of four wheelers, Two wheelers and plane under the action of
gyroscopic effect
CO 5 Understand concepts of CAM and Follower, their applications and CAM draw, CAM
profile
Mapping of course outcomes with program outcomes:
PO
1
PO
2
PO
3
PO 4 PO 5 PO 6 PO
7
PO 8 PO 9 PO
10
PO
11
PO 12
CO 1 3 2 2 2 1
CO 2 3 3 2 3
CO 3 3 2 2 3 1
CO 4 2 3 3 3
CO 5 2 3 3 2 1
ME1743 2.6 2.6 2.4 2.6 1
Semester V
ME-1752 I.C. Engines
Course Outcomes: At the end of the course, the students will able to:
CO 1 Evaluate performance of I.C. Engines
CO 2 Understand the Combustion phenomena and design for S.I. and C.I. Engines
CO 3 Understand working of various I.C. engine systems such as Fuel, Systems, Lubrication
systems
CO 4 Understand different engine exhaust emissions and their controlling methods
CO 5 Evaluate methods for improving the I.C. Engine performance
38
Mapping of course outcomes with program outcomes:
PO
1
PO
2
PO
3
PO 4 PO 5 PO 6 PO
7
PO 8 PO 9 PO
10
PO
11
PO 12
CO 1 3 3 3 2 2 2 3 1 2
CO 2 3 1 2 1 1 2 1
CO 3 2 3 3 2 2 3 1
CO 4 1 2 2 2 1 2 1 2
CO 5 2 2 2 1 2 1 1 2 2
ME1752 2.2 2.2 2.4 1.6 1.4 1.8 1.6 2 1 1.75
Semester VI
ME- 1761 Automobile Engineering
Course Outcomes: At the end of the course, the students will able to:
CO 1 Understand the basic lay-out of Automobiles
CO 2 Understand the basic principles of Chassis and frames
CO 3 Understand the Operation of transmission Suspension, Steering and Breaking system
CO 4 Understand Automotive Electronics and Control system
CO 5 Understand latest technological development in IC Engine
Mapping of course outcomes with program outcomes:
PO
1
PO
2
PO
3
PO
4
PO 5 PO
6
PO
7
PO
8
PO
9
PO
10
PO
11
PO
12
PSO1 PSO2
CO 1 3 2 1 1 1 1
CO 2 3 3 2 1 1 2
39
CO 3 3 3 2 1 1 1 1 1
CO 4 3 2 1 1 1 1 1
CO 5 1 1 3 2 1 1 1
ME1761 2.6 1.8 1.75 1 1.66 1 1.66 1 1 1 1 1.5
Semester VII
ME-1173 Heat & Mass Transfer
Course Outcomes: At the end of the course, the students will able to:
CO 1 Understand the basic modes of heat transfer and compute temperature distribution in
steady and unsteady state heat transfer through conduction
CO 2 Heat transfer analysis of extended surfaces
CO 3 Interpret and analyze forced and free convection
CO 4 Understand the Principle of Radiation, Evaluation of heat transfer by radiation
between different Geometries and basic of Mass Transfer
CO 5 Design and analysis of Heat Exchanger
Mapping of course outcomes with program outcomes:
PO
1
PO 2 PO 3 PO 4 PO 5 PO 6 PO
7
PO 8 PO 9 PO
10
PO
11
PO 12
CO 1 3 2 1
CO 2 3 3 2 2 2 1 1
CO 3 3 3 2 2 1 1 1
CO 4 3 3 2 2 1 1 1
CO 5 3 2 3 2 1 1 1 1 1
ME1173 3 2.75 2.25 2 1.5 1 1 1 1 1
40
Semester VIII
ME-1183 Computer Integrated Manufacturing
Course Outcomes: At the end of the course, the students will able to:
CO 1 A knowledge of automated process is a Modern manufacturing Environment
CO 2 An understanding of using Automation, Control Strategies towards numerical control,
robotics, automated storage, CIM, expert systems in manufacturing
CO 3 An understanding of contemporary manufacturing/production strategies such as group
technology and agils manufacturing
Mapping of course outcomes with program outcomes:
PO
1
PO
2
PO
3
PO 4 PO 5 PO 6 PO
7
PO 8 PO 9 PO
10
PO
11
PO 12
CO 1 3 1
CO 2 3 2 2 1 1
CO 3 3 2 1 1
ME1183 3 2 2 1 1
Table B.3.1b
Note:
1. Enter correlation levels 1, 2 or 3 as defined below:
1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High)
41
3.2. Attainment of Course Outcomes (75)
3.2.1. Describe the assessment tools and processes used to gather the data upon which
the evaluation of Course Outcome is based (10)
1. Assessment Tools
End semester & Mid Semester Exam: (Direct Assessment)
• The Subject teacher will design assignment questions/laborites problems/projects and distributes
them to the students.
• During commencement of the course, the subject teacher will conduct 2 Mid Semester tests as per
the academic calendar in a given semester
• The CIE marks will be based on assignments, tests, and seminars conducted in respective subjects.
• The SEE marks will be based on tests, and laboratory, oral examinations.
Practical Exam Evaluation: (Direct Assessment)
• The subject teacher will take practical examination of the subject. The students have to give Quiz
test and practical Viva in the presence of External Examiner. The students obtain less than 50%
marks will considered as fail in respective practical Examination
Seminar Work Evaluation: (Direct Assessment)
• Seminar coordinators follow rubrics, which is set by the Department for evaluation of laboratory
programs.
• All seminar coordinators will conduct 2 seminars per student. It will be evaluated by the seminar
coordinator and marks will be submitted to the Department.
Project Work Evaluation: (Direct Assessment)
• During project work, the evaluation process will be divided into number of the phases to assess
the continuous progress.
• The project guides and project coordinator follows rubrics, which is set by the Department for
evaluation and then submit to the head of Department.
• Each internal guide will see the statement of project and literature of work and implementation
details. The department will encourage students to make publications in standard
conference/journal forums.
Course Exit Survey (In-Direct Assessment)
2. Process
Process used for attainment of course outcome are as follows
• First Bench Mark is finalized by concern teacher for End Semester , Mid Semester Examination,
assignment, tutorials etc.
• Percentage attainment is calculated by counting the number of students scoring benchmark and
above divided by total no. of students for various assessment tools.
• Attainment levels have to be calculated
60% students scoring more than benchmark ---Level-1
70% students scoring more than benchmark ---Level-2
80% students scoring more than benchmark ---Level-3
42
• Direct Assessment Course Outcome Attainment is calculated by considering the weight age of
60% for End Semester and weight age of 40% for Mid Semester Examinations, assignment, tutorials
etc.
• Indirect assessment tools are also used for CO Attainment Calculation based on course exit survey
• Calculating the attainment level of Overall Course Outcome (Direct Assessment + Indirect
Assessment) by considering the weight age of 80% for direct assessment and weight age of 20% for
indirect Assessment.
3.2.2. Record the attainment of Course Outcomes of all courses with respect to set
attainment levels (65)
Measuring Course Outcomes attained through Semester End Examinations (SEE)
Calculation for Attainment of CO for ME-1174 (Power Plant Engineering) is done. Tables
B.3.2.2 (a )- (i) show calculations for reference purpose.
Mid Sem Marks Map with CO’s
S.No Name of Student Q-1 (MM 10)
CO1
Q-2 (MM 10) CO2 Total Marks
1 Hariom Singh 07 08 15
2 Suraj Pratap Singh
Sikarwar
06 06 12
3 Mamta Routel 01 02 03
4 Aashruti Sharma 08 07 15
5 Alka Choudhary 08 06 14
6 Amit Jat 08 06 14
7 Ankit Kr Pandey 08 07 15
8 Arpit Tandon 08 04 12
9 Asheesh Kurmi 09 09 18
10 Ashutosh Pandey 08 04 12
11 Deepak Ramsutrakar 01 02 03
12 Deepak Soni 02 02 04
13 Gajendra Singh Thakur 08 09 17
14 Himanshu Rajurker 02 03 05
15 Himanshu Singh 01 04 05
16 Indrajeet Yadav 04 06 10
43
17 Keyur Gandhi 06 03 09
18 Lokesh Sharma 08 08 16
19 Mahima Bunkar 06 06 12
20 Manish Thakur 09 06 15
21 Manu Chourasiya 08 06 14
22 Neha Pandey 07 06 13
23 Nikhil Kumar 06 05 11
24 Piyush Yadav 06 06 12
25 Prachi Dhote 08 07 15
26 Prachi Sahu 09 06 15
27 Pragya Yadav 08 08 16
28 Pranay Deshmukh 09 06 17
29 Praveen Kr Dhakade 06 08 14
30 Priya Upadhyay 08 06 16
32 Rana Vishwajeet 08 07 15
33 Ranjeet Waskale 06 05 11
34 Rewa Prasad Sahu 02 04 06
35 Rishab Kori 02 05 07
36 Sanjay Kumar 06 04 10
37 Sanskriti Gupta 06 06 12
38 Sarthak Tiwari 09 08 17
39 Shailendra Singh 02 06 08
40 Shikha Jain 09 09 18
41 Shubham Bhallavi 05 06 11
42 Shubham Bunkar 05 05 10
43 Siddharth Sharma 05 07 12
44 Sohan Gottre 03 05 08
44
45 Suraj Miholiya 08 07 15
46 Vikas Sinam 01 02 03
47 Vikas Bansal 01 00 01
48 Abhijeet Dubey 08 06 14
49 Anjali Patel 06 05 11
50 Ankit Sharma 08 06 14
51 Arun Pahade 07 06 13
52 Chetna Patne 03 02 05
53 Gaurav Verma 07 06 13
54 Lovekesh Sonare 09 09 18
55 Manoj Bairagee 08 07 15
56 Prakash Ahirwar 06 03 09
57 Rohit Tripathi 08 06 14
58 Sudeep Khelna 05 06 11
59 Sumit Birthare 02 06 08
60 Diksha Patil 08 05 13
61 Urmila Ahirwar 01 01 02
Table B.3.2.2 (a) Mid Sem Marks Map with CO’s
45
CO Attainment Calculation (Based on Mid Semester-1 Examination)
Bench Mark = 60%, so % attainment is calculated by counting the number of students scoring 60%
and above divided by total no. of students
Attainment Levels
60% students scoring more than benchmark (60%) ---Level-1
70% students scoring more than benchmark (60%) ---Level-2
80% students scoring more than benchmark (60%) ---Level-3
S.No Course Outcome No. of Students above
benchmark (60%)
Attainment Level
1 CO1 41 (41/61)*100 = 67.21 Level -1
2 CO2 38 (38/61)*100 = 62.29 Level -1
Table B.3.2.2 (b)
CO Attainment Calculation (Based on Mid Semester-II Examination)
S.No Course Outcome No. of Students above
benchmark (60%)
Attainment Level
1 CO3 25 (25/41)*100 = 61 Level -1
2 CO4 07 (07/41)*100 = 17.0
3 CO5 25 (25/41)*100 = 61 Level -1
Table B.3.2.2 (c)
CO Attainment Calculation (Based on Mid Semester -1 & Mid Semester-II Examination)
S.No Course Outcome No. of Students above
benchmark (60%)
Attainment Level
1 CO1 41 (41/61)*100 = 67.21 Level -1
2 CO2 38 (38/61)*100 = 62.29 Level -1
3 CO3 25 (25/41)*100 = 61 Level -1
4 CO4 07 (07/41)*100 = 17.0
5 CO5 25 (25/41)*100 = 61 Level -1
Table B.3.2.2 (d)
Marks of Students in End Semester Examination
46
S.No Q-1
MM-
14
(CO1)
Q-2
MM-
14
(CO1)
Q-3
MM-
14
CO2
Q-4
MM-
14
CO2
Q-5
MM-
14
CO4
Q-6
MM-
14
CO4
Q-7
MM-
14
CO3
Q-8
MM-
14
CO3
Q-9
MM-
14
CO5
Q-10
MM-
14
CO5
Total Marks MM-70
1 09 09 10 07 08 43
2 10 07 10 12 14 53
3 10 08 05 10 08 41
4 00 02 01 01 00 04
5 10 03 09 11 12 45
6 11 12 04 11 14 52
7 10 08 10 11 10 49
8 07 03 09 11 05 35
9 11 09 09 10 14 53
10 10 11 06 08 14 49
11 10 12 09 11 14 56
12 07 02 04 11 14 38
13 08 11 10 10 14 53
14 08 01 08 11 10 38
15 09 11 10 13 14 57
16 08 08 10 10 09 45
17 10 09 10 12 10 51
18 09 08 08 11 08 44
19 09 10 10 10 14 53
20 09 04 10 12 14 49
21 05 10 12 10 14 51
22 09 09 10 10 10 48
23 10 11 10 10 07 48
24 10 06 10 10 12 48
47
25 10 11 10 12 10 53
26 10 10 10 10 14 54
27 10 09 10 11 09 49
28 10 10 08 09 06 43
29 06 05 07 10 08 36
30 10 10 11 12 14 57
31 10 12 11 09 11 53
32 09 09 10 11 05 44
33 10 11 10 12 07 50
34 11 10 11 11 14 57
35 09 10 08 10 14 51
36 10 10 10 06 10 46
37 11 10 08 10 14 53
38 08 04 10 10 14 46
39 10 09 10 11 14 54
40 11 11 12 12 10 56
41 08 10 07 12 08 45
42 11 08 12 12 10 53
43 09 12 11 12 14 58
44 10 12 12 12 05 51
45 04 11 11 08 11 45
46 10 11 10 06 12 49
47 08 11 08 12 14 53
48 11 10 10 10 09 50
49 09 03 03 07 00 22
50 09 07 08 08 08 40
51 09 07 09 10 10 45
48
Table B.3.2.2 (e) Marks of Students in End Semester Examination
52 08 03 08 11 14 44
53 05 06 06 10 13 40
54 10 08 07 08 06 39
55 10 10 09 03 13 45
56 03 02 04 04 04 17
57 08 09 09 12 14 52
58 08 09 03 05 12 37
59 03 07 08 11 12 41
60 05 04 09 14 32
61 10 10 09 12 14 55
62 08 08 09 11 12 48
63 09 07 04 09 10 39
64 07 10 11 10 14 52
65 09 10 09 08 06 42
66 10 10 08 06 14 48
67 09 09 07 07 08 40
68 10 10 10 08 14 52
49
CO Attainment Calculation (Based on End Semester Examination)
Bench Mark = 60%, so % attainment is calculated by counting the number of students scoring 60%
and above divided by total no. of students
Attainment Levels
60% students scoring more than benchmark (60%) ---Level-1
70% students scoring more than benchmark (60%) ---Level-2
80% students scoring more than benchmark (60%) ---Level-3
S.No Course Outcome No. of Students above
benchmark (60%)
Attainment Level
1 CO1 57 (57/68)*100 = 83.82 Level -3
2 CO2 49 (49/68)*100 = 72.05 Level-2
3 CO3 58 (58/68)*100 =85.29 Level-3
4 CO4 53 (53/68)*100 = 78 Level -2
5 CO5 57 (57/68)*100 = 83.82 Level -3
Table B.3.2.2 (f)
50
Measuring CO attainment through Cumulative Internal Examinations (CIE)
Direct Assessment Course Outcome Attainment Calculation (End Semester Examination + Mid
Semester Examination)
Calculating the attainment level of Course Outcome (Direct Assessment) by considering the weight
age of 60% for End Semester and weight age of 40% for Mid Semester Examinations
Sr
No.
Course
Outcome
CO attainment End
Semester Examination
CO attainment MID
Semester Examination
60% (End Semester) +
40% ( Mid Semester)
1 CO1 3 1 1.8 + 0.4 = 2.2
2 CO2 2 1 1.2 + 0.4 = 1.6
3 CO3 3 1 1.8 + 0.4 = 2.2
4 CO4 2 0 1.2 + 0.0 = 1.2
5 CO5 3 1 1.8 + 0.4 = 2.2
Table B.3.2.2 (g)
CO Attainment Calculation (Indirect Assessment)
Indirect Assessment
Course Exit Survey
� If maximum number of students are saying that CO is Weakly attained ----Level-1
� If maximum number of students are saying that CO is Moderately attained ----Level-2
� If maximum number of students are saying that CO is Strongly attained ----Level-3
Given below is result of attainment of CO’s for a ME-1174 Power Plant Engineering based on
course exit survey
Course Outcome CO attainment
CO1 3
CO2 2
CO3 2
CO4 2
CO5 2
Table B.3.2.2 (h)
51
CO Attainment calculation (Direct + Indirect Assessment)
Calculating the attainment level of Overall Course Outcome (Direct Assessment + Indirect
Assessment) by considering the weight age of 80% for direct assessment and weight age of 20%
for indirect Assessment
S.No Course
Outcome
CO attainment
(Direct
Assessment)
CO attainment
(Indirect
Assessment)
80% Direct + 20%
Indirect
1 CO1 2.2 3 0.8 *2.2 + 0.2*3 =
2.36
2 CO2 1.6 2 0.8*1.6 + 0.2*2 =
1.68
3 CO3 2.2 2 0.8*2.2 + 0.2*2 =
2.16
4 CO4 1.2 2 0.8*1.2 + 0.2*2 =
1.36
5 CO5 2.2 2 0.8*2.2 + 0.2*2 =
2.16
Table B.3.2.2 (i)
3.3. Attainment of Program Outcomes and Program Specific Outcomes (75)
3.3.1. Describe assessment tools and processes used for measuring the attainment of
each Program Outcome and Program Specific Outcomes (10)
1. Assessment Tools
• Direct Assessment Tools
After calculating the overall attainment of course outcome, PO attainment is calculated on the basis of
mapping of CO’s with PO’s of individual subject
• Indirect Assessment Tools:
Employer survey at the end of the program
Graduate Exit Survey– Questionnaires’ as follows:
52
SAMRAT ASHOK TECHNOLOGICAL INSTITUTE MECHANICAL ENGINEERING DEPARTMENT
Exit Meeting Survey
Dear Student, It’s our pleasure to note that you are completing your graduation in a few days. We wish and hope that you have assimilated all that is required for your successful career. Kindly give your response on the following outcomes you have gained through your four-year degree program.
Head of the Department and Faculty Members
At the end of my degree program. I am able to:
Ranking : 3 - Strongly agree, 2 – Agree, 1- Average
1. Apply the basic knowledge of mathematics ③ ③ ③
Science and engineering fundamentals to solve Engineering problems.
2. Identify. Formulate and analyze complex engineering problems. ③ ③ ③
3. Design solutions for complex engineering problems ③ ③ ③
With a concern for public health and safety cultural societal and
environmental issues
4. Conduct research based investigation by using different statistical ③ ③ ③
Methods and interpret the data.
5. Select, create and use appropriate modern IT tools and techniques to ③ ③ ③
Predict and model engineering activities.
6. Apply contextual knowledge to assess societal health, safety. legal and ③ ③ ③
Cultural issues with respect to professional engineering practices.
7. Understand the impact of the professional engineering solutions in ③ ③ ③
Societal and environmental contexts.
8. Apply professional ethics in engineering practices. ③ ③ ③
9. Function as an individual and as a member in diverse and ③ ③ ③
multidisciplinary settings.
10. Communicate effectively on engineering activities with engineering ③ ③ ③
community and with society at large.
11. Work as a leader and as a member in multidisciplinary environment ③ ③ ③
during project management.
12. Recognize the need for lifelong learning for continuous enhancement ③ ③ ③
and up gradation of my knowledge in view of technological changes.
Signature------------------------------------------
53
Name----------------------------------------------
Sch. No----------------------------. ---------------
Year of Completing VIII Sem------------------
2 Process
• PO Attainment Calculation (Direct Assessment) By factoring in the attainment of CO’s
PO attainment = (PO mapping level /3)* CO attainment
• Indirect assessment tools are also used for PO Attainment Calculation based on Graduate exit
survey & Employer Survey
• Calculating the attainment level of Overall Program Outcome (Direct Assessment + Indirect
Assessment) by considering the weight age of 80% for direct assessment and weight age of 20%
for indirect Assessment.
54
3.2. Provide results of evaluation of each PO & PSO (65)
(The attainment levels by direct (student performance) and indirect (surveys) are to be
presented through Program level Course-PO&PSO matrices as indicated).
PO Attainment
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO.113 1.06 1.06 1.06 0.99 1.33 1.06 1.06
CO.123 1.4 1.47 1.31 1.29 1.29 1.4 1.5 1.4
CO.331 1.53 1.53 1.29 1.29 0.16 0.16
CO.332 2.15 1.35 1.02 1.02 0.6 0.76 2.3
CO.333 2.2 1.45 1.15 1.67 0.7
CO.334 2.22 1.25 1.48 0.67 1.18
CO.335 1.64 1 1.1 0.9 0.6
CO.336 1.95 1.32 1.21 1.22 0.64 0.51 2.30
CO.337 1.32 1.22 1.18 0.70 0.5 2.3
CO.441 1.33 1.37 0.9 1.18 0.49 0.58 0.5 0.63 0.57 0.59
CO.442 2.1 2.1 0.7 2 1.6
CO.443 1.02 1.06 1.03 1.11 0.32
CO.444 1.33 1.32 0.80 1.24 0.58 0.46 0.50 0.65
CO.445 0.86 0.75 0.57 0.65 0.42 0.5 0.28 0.6 0.36 0.67
CO.446 1.33 1.32 0.41 0.65
CO.447 0.94 0.46 0.50 0.36
CO.551 2.07 1.09 1.51 1.85 1.06 2.5 0.83 0.83 1.2 1.60 1.14 0.94
CO.552 1.86 1.69 1.88 1.14 1.39 1.34 1.28 1.09 0.88 1.49
CO.553 2.8 2.8 1.8 2.8
CO.554 2.24 1.39 1.92 1.06 1.15 1.32 0.94
CO.555 2.30 1.54 1.98 1.63 1.17 0.83 1.12 1.06 1.40 0.94
55
CO.556 2.25 1.43 2.10 1.58 1.80 1.80 1.12 0.83 1.08 1.20 1.35 1.34
CO.557 2.26 1.45 2.14 1.56 1.84 1.11 1.14 1.17 0.94
CO.661 1.62 1.28 1.13 0.57 0.87 0.52 0.78 0.5
CO.662 1.43 1.20 1.11 1.17
CO.663 1.63 1.61 1.89 2.09 2.41 1.72 1.81
CO.664 1.61 1.51 1.1 0.84 1.13 0.91 1.17 0.63 1.51 0.66 0.48 0.66
CO.665 0.85 0.40 0.31 0.57 0.57
CO.666 1.56 1.36 1.38 1.28 1.51 1.06 0.88 0.54 0.66 0.48 1.53
CO.667 1.36 1.17 1.10 1.47 1.37 1.07 1.17 0.63 1.51 0.66 0.48 1.24
CO.771 1.55 1.48 0.88 0.93 1.23 1.69 1 0.71 1.62 0.9 0.93 1.33
CO.772 0.85 0.40 0.31 0.57 0.57
CO.773 1.88 1.47 1.02 1.21 0.83 0.58 0.62 0.67 1.89 0.57 1.44
CO.774 1.93 1.16 1.44 1.04 0.96 0.72 1.44 1.44 0.57 1.44
CO.775 2.84 1.7 1.89 1.91 1.41 0.94 0.96 0.96 1.41 1.89 0.95
CO.776 1.43 1.12 0.74 1.07 0.88 1.14 0.73 0.69 1.62 0.90 0.93 1.61
CO.777 2.22 1.44 1.45 1.39 1.12 0.83 0.62 0.78 0.96 1.41 1.67 1.43
CO.881 2.02 1.46 1.65 0.45 1.36
CO.882 2.38 2 1.82 1.47 0.70 0.60
CO.883 2.20 1.73 0.96 0.70 1.74
CO.884 2.29 1.87 1.78 1.22 1.19 0.79 1.24 1.06 1.16 0.78 0.97 1.8 1.3
CO.885 2.22 1.77 1.75 1.03 0.70 0.93 2.1 1.87 1.36 1.9 1.67
Direct
Attainm
ent 1.80 1.34 1.28 1.26 1.15 1.09 0.88 0.82 1.10 0.96 1.14 1.35 0.75 1.16
56
Table B.3.3.2a
Survey PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
Exit Survey 2.19 1.92 1.84 1.84 1.73 2.08 2.07 2.16 2.13 2.18 1.89 2.21
Indirect
Attainment
2.19 1.92 1.84 1.84 1.73 2.08 2.07 2.16 2.13 2.18 1.89 2.21
Table B.3.3.2b
Note: Add more columns as needed for PSOs. Mention the type of survey conducted and the location of its source C101, C102 are indicative courses in the first year. Similarly, C409 is final year course. First numeric digit indicates year of study and remaining two digits indicate course nos. in the respective year of study.
• Direct attainment level of a PO/PSO is determined by taking average across all courses addressing that PO/PSO.
• Indirect attainment level of a PO/PSO is determined based on the student exit surveys, employer surveys, co-curricular activities, extracurricular activities etc.
57
CRITERION 4 Students’ Performance 100
(Information to be provided cumulatively for all the shifts with
explicit headings, wherever applicable)
2017-
18
2016-
17
2015-
16
Sanctioned intake of the program (N)
60 60 60
Total number of students admitted in first year minus number of
students migrated to other programs/institutions, plus no. of students
migrats(N1)
60 60 60
Number of students admitted in 2nd year in the same batch via lateral
entry (N2)
- 10 11
Separate division students,if applicable(N3) 02 03 02
Total number of students admitted in the Program(N1+N2+N3) 62 73 73
Table B.4a
CAY – Current Academic Year
CAYm1- Current Academic Year minus1= Current Assessment Year
CAYm2 - Current Academic Year minus2=Current Assessment Year minus 1
LYG – Last Year Graduate
LYGm1 – Last Year Graduate minus 1
LYGm2 – Last Year Graduate minus 2
58
Year of entry
N1 + N2 + N3
(As defined above)
Number of students who have successfully
graduated without backlogs in any
semester/year of study
(Without Backlog means no compartment
or failures in any semester/year of study)
I Year II Year III Year IV Year
2017-18 60
2016-17 58 39
2015-16 58 43 38+7
2014-15 60 42 39+9 37+7
2013-14 61+11 49 45+3 44+3 43+3
2012-13 58+12 44 37+5 33+5 33+5
2011-12 61+11 46 36+2 34+2 31+2
Table B.4b
of entry
N1 + N2 + N3
(As defined above)
Number of students who have successfully
graduated
(Students with backlog in stipulated period
of study)
I Year II Year III Year IV Year
2017-18
2016-17 14
2015-16 16 15
2014-15 06 8+1 7+4
2013-14 06 12+6 13+6 15+6
59
2012-13 07 15+4 13+4 19+4
2011-12 12 22+9 22+9 21+9
Table B.4c
For Example from data entry perspective:
Item
(Information to be provided cumulatively for all the shifts
with explicit headings, wherever applicable)
CAY CAYm1 CAYm2
(2016-17) (2015-16)
(2014-15)
Sanctioned intake of the program (N) 120 120 120
Total number of students admitted in first year minus number of
students migrated to other programs/institutions plus no. of
students migrated to this program (N1) 100 100 110
Number of students admitted in 2nd year in the same batch via
lateral entry (N2) Nil 24 24
Separate division (N3) Nil Nil Nil
Total number of students admitted in the Program (N1 + N2 + N3) 124 124 134
60
Year of entry N1 + N2 + N3
(As defined above)
Number of students who have
successfully graduated without
backlogs in any semester/year of
study
I Year II Year III Year IV Year
CAY (2016-17) 100(100+00+0)
CAYm1 (2015-16) 124(100+24+0) 60
CAYm2 (2014-15) 124 (100+24+0) 50 40+20
CAYm3 (2013-14) 134 (110+24+0) 90 80+20 70+20
CAYm4 (LYG) (2012-13) 124 (100+24+0) 100 90+20 85+18 85+15
CAYm5 (LYGm1) (2011-12) 130 (120+10+0) 80 70+10 60+10 50+10
CAYm6 (LYGm2) (2010-11) 144 (120+24+0) 70 60+15 54+10 50+10
Year of entry N1 + N2 + N3 Number of students who have
(As defined above)
successfully graduated
(Students with backlog in stipulated
period of study)
I Year II Year III Year IV Year
61
CAY (2016-17) 100(100+0+0)
CAYm1 (2015-16) 124(100+24+0) 40
CAYm2 (2014-15) 124 (100+24+0) 50 45+4
CAYm3 (2013-14) 134 (110+24+0) 20 20+4 15+3
CAYm4 (LYG) (2012-13) 124 (100+24+0) 0 0+4 5+4 5+4
CAYm5 (LYGm1) (2011-12) 130 (120+10+0) 30 30+10 25+4 50+10
CAYm6 (LYGm2) (2010-11) 144 (120+24+0) 30 25+5 25+5 20+5
4.1. Enrolment Ratio (20)
Enrolment Ratio= N1/N = 60 /60 = 100%
Item
(Students enrolled at the First Year Level on average basis during the last
three
Marks
years starting from current academic
year)
>=90% students enrolled 20
>=80% students enrolled 18
>=70% students enrolled 16
62
>=60% students enrolled 14
Otherwise 0
Table B.4.1
4.2. Success Rate in the stipulated period of the program (20)
4.2.1. Success rate without backlogs in any semester/year of study (15)
SI= (Number of students who have graduated from the program without
backlog)/(Number of students admitted in the first year of that batch and admitted in
2nd year via lateral entry and separate division, if applicable)
Average SI = Mean of Success Index (SI) for past three batches
Success rate without backlogs in any semester/year of study = 15 × Average SI
15 x 0.545 = 8.17
Item
Graduate
2013-14
Graduate
2012-13
Graduate
2011-12
Number of students admitted in the
corresponding First Year + admitted in 2nd
year via lateral entry and separate
division, if applicable
58+12=70 61+12=73 61+11=72
Number of students who have graduated
without backlogs in the stipulated period
43+3=46 33+5=38 31+2=33
Success Index (SI) 0.657 0.520 0.458
Table B.4.2.1
63
4.2.2. Success rate with backlog in stipulated period of study (5)
SI= (Number of students who graduated from the program in the stipulated period of
course duration)/ (Number of students admitted in the first year of that batch and
admitted in 2nd year via lateral entry and separate division, if applicable)
Average SI = mean of Success Index (SI) for past three
batches Success rate = 5 × Average SI = 5 x 0.878 = 4.39
Item
Graduate
2013-14
Graduate
2012-13
Graduate
2011-12
Number of students admitted in the corresponding
First Year + admitted in 2nd year via lateral entry and
separate division, if applicable
70 73 72
Number of students who have graduated with
backlogs in the stipulated period
46+19=65 38+23=61 30+33=63
Success Index (SI) 0.928 0.835 0.875
Average Success Index 0.878
Table B.4.2.2
Note: If 100% students clear without any backlog then also total marks scored will be 20 as both
4.2.1 & 4.2.2 will be applicable simultaneously.
4.3. Academic Performance in Second Year (10)
Academic Performance = Average API (Academic Performance Index),where
64
API = ((Mean of 2nd
Year Grade Point Average of all successful Students on a 10 point
scale) or (Mean of the percentage of marks of all successful students in Second Year/10)) x
(number of successful students/number of students appeared in the examination)
Successful students are those who are permitted to proceed to the Third year.
Academic Performance 2016-17 2015-16 2014-15
Mean of CGPA or Mean Percentage of all successful students 7.53 7.87 7.26
(X)
Total no. of successful students (Y)
42 47 44
Total no. of students appeared in the examination (Z) 67 68 62
API = X* (Y/Z) 4.72 5.43 6.18
Average API = (AP1 + AP2 + AP3)/3 5.44
Table B.4.3
4.4. Placement, Higher Studies and Entrepreneurship (30)
Assessment Points = 30 × average placement
Item 2017-18 2016-17 2015-16
Total No. of Final Year Students (N) 75 72 72
No. of students placed in companies or Government Sector (x) 12 06 16
65
No. of students admitted to higher studies with valid qualifying scores 25 11 23
(GATE or equivalent State or National Level Tests, GRE, GMAT etc.) (y)
No. of students turned entrepreneur in engineering/technology (z) - - -
x + y + z = 37 17 39
Placement Index : (x + y + z )/N 0.493 0.236 0.54
Average placement= (P1 + P2 + P3)/3 0.423
Assessment Points = 30 × average placement 12.69
Table B.4.4
4.4a. Provide the placement data in the below menti oned format with the name of the program
and the assessment year:
Programs name and assessment year: 2015-2016
s.no Name of the student placed Enrollment no. Name of the
employer
Appointment
letter reference
no. with date
1 Yashvant Singh Ginnare, 0108ME121060 Diffusion, 01.12.2015
2 Pragati Sharma 0108ME121036 Diffusion, 01.12.2015
3 Gaurav Kumar Cholkar, 0108ME121015 Diffusion, 01.12.2015
4 Rupendra Patil, 0108ME121045 Diffusion, 01.12.2015
5 Akhlesh Dubey, 0108ME121003 Epic Research 27.04.2016
6 MallikaVerma, 0108ME121027 Epic Research 27.04.2016
7 Ankit Verma, 0108ME121005 Epic Research 27.04.2016
8 Manish Roy 0108ME121029 TCS 13.10.2015
66
9 Rahul Singh Jat 0108ME121040 TCS 13.10.2015
10 PrateekTambe 0108ME121038 TCS 13.10.2015
11 Rahul Sahu 0301ME121041 TCS 13.10.2015
12 MallikaVerma 0108ME121027 Trade india 23.02.2016
13 Ashish Chouhan 0108ME121009 Ways 2 Capital 05.05.2016
14 Suchita Thakur 0108ME121057 Ways 2 Capital 05.05.2016
15 Sonu Kumar Kushwaha, 0108ME133D10 Ways 2 Capital 05.05.2016
16 Deepak singh chauhan, 0108ME121012 Ways 2 Capital 05.05.2016
Programs name and assessment year: 2016-2017
s.no Name of the student placed Enrollment no. Name of the
employer
Appointment
letter reference
no. with date
1 DivyaSanodiya 0108ME131018 BullMartRes,Pvt.LTD 25.05.2017
2 SHANTANU PANDEY 0108ME131047 ShriRam Finance 31.01.2017
3 ABHINAV DUBEY 0108ME131002 TCS 29.09.2016
4 NAMAN PANDEY 0108ME131027 TCS 29.09.2016
5 UMANG JAIN 0108ME131057 TCS 29.09.2016
6 Ankush Sharma 0108ME131007 TCS 29.09.2016
67
Programs name and assessment year: 2017-2018
s.no Name of the student placed Enrollment no. Name of the
employer
Appointment
letter reference
no. with date
1 ARPIT TANDON 0108ME141009 TCS 11.11.2017
2 SUMIT BIRTHARE 0108ME153D12 TCS 11.11.2018
3
SURAJ PRATAP SINGH
SIKARWAR
0108EC141054
TCS 11.11.2019
4 SANSKRITI GUPTA 0108ME141047 TATA AIG 02.11.2017
5
SURAJ PRATAP SINGH
SIKARWAR
0108EC141054
BYJU'S 13.12.2017
6 SUDEEP KHELNA 0108ME153D11 Ways2star 23.05.2018
7 ROHIT KUMAR TRIPATHI 0108ME153D10 Ways2star 23.05.2018
8 ABHIJEET DUBEY 0108ME153D01 Ways2star 23.05.2018
9 MANOJ BAIRAGEE 0108ME153D08 Ways2star 23.05.2018
10 VIKASH BANSAL 0108ME141058 Ways2star 23.05.2018
11 RohitTripathi 0108ME153D10 YKK 06.04.2018
12 LovekeshSonare 0108ME153D07 SPM Auto 08.05.2018
Table B.4.4a
68
4.5. Professional Activities (20)
4.5.1. Professional societies/chapters and organizing engineering events (5)
S.No Name of Students Activities Date
1 Akshay Raghuwanshi Participation Certificate SAEINDIA in
Helix ’15, a workshop on CATIA and
ANSYS 23rd
-24th
,2015
2015
2 Durgesh Vishwakarma SAEINDIA Successfully Participated in
Helux ’15, a Workshop CATIA and ANSYS
organized by Mech. Engg. Deptt.
2015
3 Jyoti Suryawanshi CATIA and ANSYS Department of
Mechanical Engineering SAE@SATI
Collegiate Club.
2015
4 Anushi Singh Participated in Helix ’15,a Workshop on
CATIA and ANSYS by Mechanical
Engineering Department SAE@SATI
Collegiate Club.
2015
5 Sahil Lodhi The Moving Wheels a workshop on
Automobile Department of Mechanical
Engineering SAE@SATI Collegiate Club.
2015
6 Pragya Yadav The Moving Wheels a workshop on
Automobile Department of Mechanical
Engineering organized by SAE Collegiate
Club. SATI, Vidisha
2015
7 Ashutosh Pandey Certificate The Moving Wheels a
Workshop on Automobile organized by
Mechanical Engg. Department SAE@SATI
Collegiate Club.
2015
8 Pragya Yadav Satyarth-I 2016 Robo Warrier
(Technovision) held at Samrat Ahok
Technological Institute Vidisha (M.P)
2015
9 Pragya Yadav Satyarth-I 2016 CASCADE (Technovision)
held at Samrat Ahok Technological
2015
69
Institute Vidisha (M.P)
10 Amit Kori SAEINDIA The Mobbing Wheels a
Workshop Automobile Organized by
Department of Mechanical Engineering
SAE@SATI College Club
2016
11 Akshay Raghuwanshi SAEINDIA The Mobbing Wheels a
Workshop Automobile Organized by
Department of Mechanical Engineering
SAE@SATI College Club
2016
12 Praveen Kumar Dhakade Publicity – Chair of SAE Collegiate Club,
SATI Vidisha
2016
13 Pragya Yadav Certificate of Recognition as Reception
Chair by SAE Collegiate Club. SATI,
Vidisha
2016
4.5.2. Publication of technical magazines, newsletters, etc. (5)
Collegiate club of Samrat Ashok Technological Institute publishes new letter quarterly
SEAINDIA.
4.5.3 Participation in inter-institute events by students of the program of study (10)
S.No Name of Students Activities Date
1 Shikha Jain Certificate in Workshop
“ELECTROLEARN” organized by CLUB
‘O’ E of Electronics and
Communication Engineering
Department. On September 20th 2014
2014
2 Sanskriti Gupta EFFI Cars as a member of team
FIRBOLT Performance in EFFI-CARs
held from 21st
October to 24th
October,2016
2014
3 Sanskriti Gupta Junior Diploma Examination from
Prayag Sangeet Samiti, Allahabad in
2014
70
the year 2011-2012 in FIRST division
4 Sanskriti Gupta Senior Diploma Cum Marksheet
Subject BHARAT NATYAM Placed in
FIRST division
2014
5 Gajendra Singh Thakur Workshop “EXLECTROLEARN”
organized by CLUB ‘O’ E of Electronics
AND Communication Engineering
Department on Septemtnber 20th
2014
6 Pragya Yadav State level Kabaddi Championship of
RGPV at Malwa Institute of
Technology & management, Gwalior
2014
7 Sarthak Tiwari “13th
State Level Inter Engineering
Cricket Tournament” Winner
2015
8 Sanskriti Gupta Certificate HONOUR CODE
ME209Xa15: Thermodynamics
2015
9 Sanskriti Gupta Certificate of Completion Course on
CATIA V5 during JUN-AUG 2015
2015
10 Sanskriti Gupta Certificate of Excellence has secured II
Place in the event Nukkad Natak at
Fluxus’15,IIT Indore.
2015
11 Amit Kori Certificate of Excellence has secured III
Position in Manoeuvre (“A Pick &
Place conducted by Robolnc.held
during 3rd
-4th
October,2015
2015
12 Akshay Raghuwanshi Certificate of Excellence Robolnc.2015
has secured Ist
Position in Manoeuvre
Manoevure (“APick & Placed
conducted by Roboln. Held during 3rd
-
4th
October,2015
2015
13 Akshay Raghuwanshi Certificate of Experience for
participating in the first ever Hackath
non “Line follower Bot” organised on
Saturday, October 17,2015
2015
14 Anushi Singh Certificate Participating in the first 2015
71
ever Hackath on “Line Follower
Hot”organized on Saturday, October
17,2015
15 Anushi Singh Certificate Robolnc.2015 1 Position
Manoeuvre(“A Pick & Place Robolnc
during 3rd
& 4th
Octorber 2015
2015
16 Sanskriti Gupta Green Vision Participated in the event
Debate and has Secured 1st
Position
2015
17 Sanskriti Gupta National Cadet Corps Certify that No.
MP/SW/14/19383 Rank Cdt
Participated in International Day of
Yoga on 21 Jun 2015.
2015
18 Akshay Raghuwanshi Participation Certificate SAEINDIA in
Helix ’15, a workshop on CATIA and
ANSYS 23rd
-24th
,2015
2015
19 Pragya Yadav Rajiv Gandhi Proudyogiki
Vishwavidyalaya Nodal Level Kabaddi
Tournament from 11.09.14 to
12.09.14 at Bansal College (Bhopal)
2015
20 Pragya Yadav TECH ACME-2015 atOIST Bhopal In
Association with TATA Consultancy
Services
Certificate for Winner Second
Posetion in Kabaddi (G)
2015
21 Asheesh Kurmi Certificate of Participation Microsoft
PowerPoint
2015
22 Akshay Raghuwanshi Certificate of Participation by Technex
the Annual Techno-Management
Festival of IIT (BHU)Varanasi.
2015
23 Ayush Pandey Technex The Annual Techno-
Management Festival Of IIT (BHU)
Varanasi.
2015
24 Sahil Lodhi Technex The Annual Techno-
Management Festival of IIT (BHU)
Varanasi.
2015
25 Amit Gour Technex The Annual Techno-
Management Festival of
2015
72
IIT(BHU)Varanasi
26 Praveen Kumar Dhakade Technex’15, the annual techno-
management festival of IIT (BHU)
Varanasi.
2015
27 Gajendra Signh Thakur Technex’15,the annual techno-
management festival of IIT (BHU)
Varanasi.
2015
28 Jyoti Suryavanshi Electrolearn –Basic Electronics
Workshop
2015
29 Pragya Yadav Techkriti, the Annual Technical and
Entrepreneurial Festival of IIT Kanpur,
held from 19th
-22nd
March,2015
2015
30 Pragya Yadav Certificate of Appreciation in Youth
sensation Welfare Society,Vidisha
2015
31 Gajendra Singh Thakur Grreen Vision 2015
32 Alpesh Jain Helix 15, a workshop on CATIA and
ANSYS (SAEINDIA)
2015
33 Pragya Yadav CATIA 2015
34 Sanskriti Gupta National Cadet Corps Certify that No.
MP/SW/14/19383 Rank Cdt
Participated in International Day of
Yoga on 21 Jun 2015.
2015
35 Jyoti Suryawanshi CATIA and ANSYS Department of
Mechanical Engineering SAE@SATI
Collegiate Club.
2015
36 Anushi Singh Participated in Helix ’15,a Workshop
on CATIA and ANSYS by Mechanical
Engineering Department SAE@SATI
Collegiate Club.
2015
37 Anushi Singh F Techfest Certificate of Organization
as College Reprentatur during
Techfest 2015-16
2015
38 Sikha Jain Certificate Participated in
(Rank CPL) Combined Annual Training
Camp on National Cadet Corps Bhopal
2015
73
39 Asheesh Kurmi Honour Code Certificate ME-209XA15:
Thermodynamics
2015
40 Anushi Singh Certificate of Organisation for being a
part of organizing team in National
level zonal competitions. TechnoVoltz
held in the Bhopal zone during
Techfest 2015016
2016
41 Anushi Singh Certificate of Participation National
Level zonal competitions held in the
Bhopal zone during Techfest 2015-
16(Block Warrior)
2016
42 Sanskriti Gupta Sangeet Prabhakar Examination
Subject BHARAT NATYAM Placed in
FIRST division
2016
43 Sikha Jain Certificate secured First Patriot’s
Rhyme”paetry competition held on
January 26 2016 organized by
CLUB’O’E.
2016
44 Amit Gour CATIA/ REAL CAD 2016
45 Anushi Singh Certificate Birth Anniversary of Swami
Vivekananda Speech Competition
Secured I/II/III Consolation Prize
2016
46 Sanskriti Gupta Certificate Combined Annual Training
Camp(Senior/Junior Division / Wing
Rank LCPL
2016
47 Sanskriti Gupta Certificate National Kart Racing
Championship 2016 Season- 3 held at
Mohites Racing Academy,Kolhapur;
from 29th Sept. to 02nd October 2016
2016
48 Sarthak Tiwari Certificate of Completion Real CAD 2016
49 Sikha Jain Certificate of Completion Course on
CATIA during Jan-March 2016
2016
50 Anushi Singh Certificate of Completion Course on
CATIA Oct-Dec. 2016
2016
51 Sanskriti Gupta Certificate of Excellence ME Branch 2nd
year has secured Third Position in
Business Quiz Competition on 24
2016
74
February. 2016 organised by
Bhangaarchand.
52 Akshay Raghuwanshi Certificate of Participation National
Kart Racing Championship 2016 held
at Mohites Racing Academy,Kolhapur;
from 29th
September to 2nd
October
2016
2016
53 Sanskriti Gupta Certificate of Participation Valid entry
in internshala Content Writing
Contest, organized in association with
UCWeb (Alibaba Group). In December
2016.
2016
54 Sanskriti Gupta Certificate of Winning of Mechancial
Vth
sem has been awarded I Position in
Devate Competition
2016
55 Sanskriti Gupta Certificate Rank CPL passed the
Certificate ‘B’ (A-GRADING) held in
2016 under the authority of Ministry
of Defence, Government of India.
2016
56 Anushi Singh Certificate T- ARCHO NNS UNIT-
Second Position
2016
57 Anushi Singh Certificate Technovision-2016
cant vote has won – 1st
2016
58 Anushi Singh Certificate Workshop on MATLAB
organized under Electronics and
Instrumentation Society Natu
Computer center, SATI, Vidisha
2016
59 Anushi Singh Effi-CYCLE Saeindia from Samrat Ashok
Technological Institute, Team
Nishnaad
2016
60 Alpesh Jain In recognition of valuable support
voluntarily given to the RUN BHOPAL
RUN, held on December 4,2016
2016
61 Alpesh jain In recognition of valuable support
voluntarily given to the RUN BHOPAL
RUN, held on December 4,2016
2016
62 Durgesh Vishwakarma Indipandenceday 2016 Participation in 2016
75
63 Lokesh Sharma National Creativity Aptitude Test
participated in Round 1 of National
Creativity Aptitude Test 2016.
2016
64 Harsh Vardhan Sahu Real CAD (Certificate of Completion) 2016
65 Gajendra Singh Thakur SAEINDIA Effi-Cycle-2016 2016
66 Siddarth Sharma Underwent on-the job training in the
RES Division of RITES Lteb. Under
Group General Manager (RES) for a
period from 20.06.2016 to 15.07.2016
He has been involved in the project on
“Study on Operation & Operation &
Maintenance of Locomotives site at
Jhajjar Haryana”
2016
67 Anushi Singh National Kart Raching Chamionship
2016 Season-3 held at Mohites Racing
Academy, Kolhaur;from 29th
September to 2nd
October 2016
2016
68 Pragya Yadav National Kart Racing Championship
2016 Season-3 held at Mohites Racing
Academy, Kolhapur;from 29th
September to 2nd
October 2016
2016
69 Ashutosh Pandey Certificate The Moving Wheels a
Workshop on Automobile organized
by Mechanical Engg. Department
SAE@SATI Collegiate Club.
2016
70 Anushi Singh Participation Certificate The Moving
Wheels a Workshop on Automobile by
Mechanical Engineering Department
(SAEINDIA)
2016
71 Praveen Kumar Dhakade The Indian Engineering Olympiad
exam conducted on 21th February
2016
2016
72 Asheesh Kurmi Real CAD Design 2016
73 Sanskriti Gupta Training Certificate Industrial And
Automobile at CI Automotors Pvt. Ltd
Bhopal 18 June 2016 to 2 July 2016
under our Technical Team Supervision
2016
76
74 Pragya Yadav Certificate of Recognition as
Reception Chair by SAE Collegiate
Club.SATI, Vidisha
2016
75 Praveen Kumar Dhakade Rose as Trainer in Moving Wheels a
Workshop on basics of Automobile
Engineering held on 18th
Feb.2016
2016
76 Gajendra Singh Thakur Rose as Trainer in Moving Wheels a
Workshop on basics of Automobile
Engineering held on 18th
Feb.2016
2016
77 Sahil Lodhi Real CAD is the Unit of SKILLFOLIO
INNOVATION Privat Limited for
Providing quality education on CAD
CAM
2016
78 Pragya Yadav Techkriti, the Annual Technical and
Entrepreneurial Festival of IIT Kanpur,
held from 3rd
06th
March,2016
2016
79 Gajendra Singh Thakur Techkriti,theAnnual Technical and
Entrepreneurial Festival of IIT
Kanpur,held from 3td-6th
March,2016
2016
80 Praveen Kumar Dhakade CATIA 2016
81 Alpesh Jain Virtual BAJA SAEINDIA 2016 by
SAEINDIA on 24th
& 25th
Jun at
Chitkara University, Punjab.
2016
82 Praveen Kumar Dhakade Virtual BAJA SAEINDIA 2016 by
SAEINDIA on 24th
& 25th
Jun at
Chitkara University, Punjab.
2016
83 Gajendra Singh Thakur Virtual BAJA SAEINDIA 2016 by
SAEINDIA on 24th
& 25th
Jun at
Chitkara University, Punjab.
2016
84 Amit Gour Virtual BAJA SAEINDIA 2016 by
SAEINDIA on 24th
& 25th
Jun at
Chitkara University, Punjab.
2016
85 Anushi Singh Virtual BAJA SAEINDIA 2016 by
SAEINDIA on 24th
& 25th
Jun at Christ
University, Kengeri Campus Bengaluru.
2016
77
86 Praveen Kumar Dhakade Hero Moto. Corp Ltd. 2016
87 Sikha Jain Proficiency Certificate Rank CPI
Participated in TUG OF WAR
2016
88 Praveen Kumar Dhakade SAEINDIA Northern Section EFFI-
CYCLE-2016
2016
89 Sikha Jain Proficiency Certificate Rank CPl
Participated in Drill Competition
Bhopal
2016
90 Harsh Vardhan Sahu Competition during techfest -2016-17 2016
91 Anushi Singh Certificate of Participation Galactic
Trooper during Technorion
Nationwide zonal Competitions at
Tehchfest 2016-17
2017
92 Amit Gour Competition / Workshop/ TW-MUN
during
2017
93 Ayush Pandey Competition during Techfest
2016-17
2017
94 Ayush Pandey Compition/Workshop/TW-MUN
during Techfest 2016-17
2017
95 Ayush Pandey During Technorion Nationwide Zonal
Competiotions. At Techfest 2016-17
2017
96 Anushi Singh Certificate Summer Internship at our
HEG plant w.e.f 13.05.2017 to
27.05.2017 Utilization of Wasted
Activated Carbon in Products in our
plant
2017
97 Akshay Raghuwanshi Certificate Appreciation 11th
January
2017 BE Mechanical Engg. Ist Year
First Position in End Semester
Exam.2015-16
2017
98 Sanskriti Gupta Certificate of Participated Nukkad
natak Prelims of Roatrip Nationals,
held on 15 oct.2017organised by
Antiaraoni’17the annual cultural
festival of IIT Kanpur and has secured
1st
Rank by team.
2017
78
99 Akshay Raghuwanshi Certificate of Participation National
Kart Racing Championship 2017
organized by Virtualis Motorsports at
vikrant Group of Institution, Indore on
8-9 July 2017
2017
100 Sikha Jain Certificate Passed the Certificate
‘C’Examination Unit 14 BN NCC
Vidisha
2017
101 Ahutosh Pandey Certificate Summer/Winter Vocational
Training from 05/06/2017 to
17/06/2017 Performance Very Good
2017
102 Siddarth Sharma CG Power and Industrial Solutions
Limited Vocational Training from 1st
May 2017 to 27th
May 2017
2017
103 Ashessh Kurmi Completed the Vocational/ Industrial
Training of Four Week
from.01.05.2017 to 27.05.2017 at
Technical Training Centre, Coach
Rehabilitation workshop west Central
Railway, Bhopal
2017
104 Asheesh Kurmi Innovative Research in Engineering &
Science 16th
February 2017
2017
105 Sarthak Tiwari Major Training Certificate CI
Automotors Pvt. Ltd. 18.05.2017 to
18.06.17
2017
106 Sahil Lodhi National Kart Racing Championship
2017 Season-4 held at RPM
International Kart Racing Circuit,
Bhopal and hosted by Radharaman
Institute Of Technology &Science,
Bhopal from-29th
September to3rd
October 2017
2017
107 Sahil Lodhi National Kart Racing Championship
2017 Season-4 orgnized by Virtualis
Motorsports at Vikrant Group Of
Institution, Indore on 8-9 July, 2017
2017
108 Harsh Vardhan Sahu National Kart Racing Championship- 2017
79
2017
109 Amit Gour National Kart Racing Championship-
2017
2017
110 Sanskriti Gupta National Youth Conclave 2017
Participated as a Delegate in Madhya
Pradesh Yuva Sansad’s National Youth
Conclave 2017, held at Campion
School Auditorium, Bhopal on 6th
August 2017.
2017
111 Sanskriti Gupta The Indian Science Congress
Association has Patricipated in the
104th
Indian Science Congress held at
S.V University, Tirupati from January
03 to 07, 2017 Her Membership
Number is STM1023
2017
112 Durgesh Vishwakrma Vidisha Marathon-2017 has
participated in Vidisha Marathon-
2017 has been declared FIRST
2017
113 Sanskriti Gupta Certificate Rank SGT NCC Directorate
Cadet has passed the Certificate ‘C’ In
A Grade held in 2017 under the
authority of ministry of Defence
Government of India.
2017
114 Harsh Vardhan Sahu National Kart Racing Championship-
2017
2017
115 Ayush Pandey Nationla Kart Racing Chamionship
2017 Session-I Held at RPM
International Kart Racing Circuit
Bhopal and hosted by Radharaman
Institute Of Technology & Science,
Bhopal: From 29th
September to 3rd
October 2017
2017
116 Sanskriti Gupta Certificate of Merit Secured Content
Writing internship at Bigsmall.in
through Internshala – India’s No 1
internship platform.
2017
117 Sanskriti Gupta Certificate of Completion
Internashala
2017
80
118 Sanskriti Gupta Certificate Vocational / Industrial
Training of Four Week From
01.05.2017 to 27.05.2017 at Technical
Training Certre, Coach Rehabilitation
Workshop, West Central Railway
Bhopal
2017
119 Pragya Yadav Vocational/Industrial Training of FOUR
WEEK from 05.05.2017 to 27.05.2017
at Technical Training Centre, Coach
Rehabilitation workshop west Central
Railway, Bhopal
2017
120 Amit Gour Human Resource Development Centre
(Training Certificate)
2017
121 Sheetal Rai Certificate Vocational training at
Satpura Thermal Power Station, Sarni
Distt. Betul.
2017
122 Gajendra Singh Thakur ANSYS 2017
123 Akshay Raghuwanshi Certificate Diesel Loco Shed Itarsi
West Central Railway from 05-06-2017
to 17-06-2017 at Diesel Training
Centre Itarsi
2017
124 Amit Kori Certificate Diesel Loco Shed Itarsi
West Central Railway from 05-06-2017
to 17-06-2017 at Diesel Training
Centre Itarsi
2017
125 Harsh Vardhan Sahu Human Resource Development Centre 2017
126 Ayush Pandey Training Certificate
Bharat Heavy Electricals Ltd. Bhopal
2017
127 Anushi Singh Certificate Vacational training at
Satpura Thermal Power Station Sarni
Distt. Betul Two Weeks
2017
128 Alpesh Jain Vocational training at Satpura Thermal
Power Station,Srni Distt. Betul
2017
129 Alpesh jain Virtual BAJA SAEINDIA 2016 by
SAEINDIA on 24th
& 25th
Jun at Christ
University, Kengeri Campus Bengaluru.
2017
81
130 Pragya Yadav Virtual BAJA SAEINDIA 2016 by
SAEINDIA on 24th
& 25th
Jun at Christ
University, Kengeri Campus Bengaluru.
2017
131 Ayush Pandey Completed 03 days training program
on”Autombile Design & Simulation
“Organized by VIRTUALIS
MOTORSPORTS, held on 24th
26th
June,
2017 at Meerut Instutute Of
Engineering and Technology. Meerut.
2017
132 Amit Gour Virtual BAJA SAEINDIA 2017 by
SAEINDIA on 14th
& 15th
July at
Chitkara University, Punjab.
2017
133 Ayush Pandey Virtual BAJA SAEINDIA 2017 organized
by SAEINDIA on 14th
& 15th
July 2017
at Chitkara Univiersity Punjab
2017
134 Sahil Lodhi Virtual BAJA SAEINDIA 2017 organized
by SAEINDIA on 14th
& 15th
July 2017
at Chitkara Univiersity Punjab
2017
135 Harsh Vardhan Sahu Virtual BAJA SAEINDIA 2017 organized
by SAEINDIA on 14th & 15th July 2017
at Chitkara Univiersity Punjab
2017
136 Sahil Lodhi Training Certificate Bharat Heavy
Electricals Ltd. Bhopal
2017
137 Ayush Pandey Virtulis Motorsports at Vikrant Group
Of Institution, Indore 0n 8-9 July.2017
2017
138 Shikha Jain Vocational / Industrial Training of
FOUR Week from 01.05.2017 to
27.05.2017 Technical Training centre,
Coach Rehabilitation Workshop, West
Central Railway Bhopal
2017
139 Sanskriti Gupta Internshala Student Partner 7.0
program with internshala during the
period March 2017to August 2017
2017
140 Durgesh Vishwakrma Certificate of Participation in Mini
Marathon and contributing in the
causes
2018
141 Durgesh Vishwakarma Certificate Participated in Combined
annual Training Camp on National
2018
83
CRITERION 5 Faculty Information and Contribution 200
Name of the
Faculty
Member
Qualification Association
with the
Institution
Designati
on
Date of
Joining
the
Institutio
n
Depart
ment
Specializatio
n
Academic Research Sponsored
Research
(Funded)
Consultancy
and Product
Development
Degree
(highest
degree)
University Year of
Gradu
ation
Research
Paper
Publicatio
ns
Ph.D.
Guidance
Faculty
Receiving
Ph.D.
during the
Assessment
Years
Dr. Pankaj
Agarwal
Ph.D. Barkatullaha
University,
Bhopal
1990 Regular Professor 12.08.91 Mecha
nical
Operations
managemen
t
87 02 NIL NIL NIL
Dr. Lokesh
Bajpai
Ph.D. BU 1984 Regular Professor 23.08.85 Mecha
nical
Production 45 5 1999 NIL NIL
Dr. Sanjay
Katarey
PhD Bhopal
University
1986 Regular professor 13.11.92 Mecha
nical
Thermal 25 02-
ongoing
NIL NIL NIL
Dr. P L
Verma
Ph.D. R.G.P.V.
Bhopal
2009 Regular Professor 21.06.99 Mecha
nical
Production 55
NIL
NIL NIL NIL
Dr. Ashish
Manoria
PhD R.G.P.V.
Bhopal
1998 Regular Professor 13.04.99 Mecha
nical
Advanced
Production
System
60 NIL Yes
In 2015-16
NIL NIL
Sandeep
Jain
M.E. Barkatullaha
University,
1986 Regular Associate
Professor
12.09.88 Mecha
nical
Advanced
Production
20 NIL NIL NIL NIL
84
Bhopal System
Sanjay Jain M.E. Barkatullaha
University,
Bhopal
Regular Associate
Professor
05.09.89 Mecha
nical
Advanced
Production
System
35 NIL NIL NIL NIL
Dr. S.K.
Dhakad
Ph.D. BU Bhopal 2003 Regular Associate
Professor
24.08.05 Mecha
nical
Mechanical 49 01
On going
NIL NIL NIL
Dr.Ravindra
Mohan
Ph.D. Barkatullaha
University,
Bhopal
1988 Regular Assistant
Professor
20.05.97 Mecha
nical
Production
and
Operations
managemen
t
18 01 NIL NIL NIL
Dr. Chandra
Pal Singh
Ph.D. MANIT,
Bhopal
2000 Regular Assistant
Professor
31.08.04 Mecha
nical
Design 10 0 2017-18 NIL NIL
Neeraj Sen
M.Tech R.G.P.V.
Bhopal
2004 Regular Assistant
Professor
22.08.06 Mecha
nical
C.I.M.(Comp
uter
Integrated
.Manufactur
ing)
02 NIL NIL NIL NIL
Jagdish
Prasad
Shakya
M.Tech MANIT,
Bhopal
1996 Contract Assistant
Professor
( Contract
Basis)
12.09.07 Mecha
nical
Maintenanc
e Engg.
03 NIL NIL NIL NIL
Kamlesh
Kumar
M.Tech MANIT,
Bhopal
2005 Contract Assistant
Professor
(Contract
18.08.10 Mecha
nical
Thermal
Engg.
05 NIL NIL NIL NIL
85
Sharma
Basis )
Sachin Sen
M.Tech RGTU 2009 Contract Assistant
Professor
12.08.13 Mecha
nical
cim 02 NIL NIL NIL NIL
Gayatri
Kushwah
M.E. RGPV Bhopal
/SGSITS Indore
02
years
Contract Asst.
Professor
(contract)
12.08.13
Mecha
nical
Industrial
Engg. &
Maintenanc
e
02
NIL NIL NIL NIL
Prachi
Kanherkar
M.E. R.G.P.V.
Bhopal
2011 Contract Assistant
Professor
27.0116 Mecha
nical
Production
Engg.(comp.
Integrated
Mfg.)
02. NIL NIL NIL NIL
Dr. Ashish
Khaira
PhD MANIT,
Bhopal
2017 Regular Assistant
Professor
01.01.18 Mecha
nical
Condition
Monitoring,
Manufacturi
ng
12 NIL NIL NIL NIL
Rakesh
Mangore
M.Tech IIT Bombay 2017 Regular Assistant
Professor
01.01.18 Mecha
nical
Aerospace
Propulsion
NIL NIL NIL NIL NIL
Dr. M.
Mohsin
Khan
PhD MANIT,
Bhopal
2017 Regular Assistant
Professor
05.01.18 Mecha
nical
Composite
materials
and
Tribology
12 NIL NIL NIL NIL
86
Table B.5
Ajay Sonare
M.Tech NIT Warangal 2017 Regular Assistant
Professor
02.01.18 Mecha
nical
Thermal
Engineering
NIL NIL NIL NIL NIL
87
5.1. Student-Faculty Ratio (SFR) (20)
(To be calculated at Department Level)
No. of UG Programs in the Department (n):__1_______
No. of PG Programs in the Department (m): 2_______
No. of Students in UG 2nd Year= u1(72)
No. of Students in UG 3rd Year= u2(72)
No. of Students in UG 4th Year= u3(72)
No. of Students in PG 1st Year= p1(36)
No. of Students in PG 2nd Year= p2(36)
No. of Students = Sanctioned Intake + Actual admitted lateral entry students
(The above data to be provided considering all the UG and PG programs of the
department) S=Number of Students in the Department = UG1+UG2+UG3+PG1+PG2
F = Total Number of Faculty Members in the Department (excluding first year
faculty)
Student Faculty Ratio (SFR) = S / F
Year CAY
(2017-18)
CAYm1
(2016-17)
CAYm2
(2015-16)
u1.1 (Mechanical) 72 71 72
UG1 72 71 72
u2.1(Mechanical) 72 71 72
UG2 72 71 72
U3.1(Mechanical) 72 71 72
88
UG3 72 71 72
p1.1 (APS) 18 18 18
p1.2 (CIM) 18 18 18
PG1 36 36 36
P2.1 (APS) 18 18 18
P2.2 (CIM) 18 18 18
PG2 36 36 36
Total No. of Students
in the Department (S)
288 285 288
No. of Faculty in the
Department (F)
20 13 13
Student Faculty Ration
(SFR)
14.4 21.92 22.15
Average SFR 19.49
Table B.5.1
Marks to be given proportionally from a maximum of 20 to a minimum of 10 for average SFR
between 15:1 to 25:1, and zero for average SFR higher than 25:1. Marks distribution is given
as below:
< = 15 - 20 Marks
< = 17 - 18 Marks
< = 19 - 16 Marks
< = 21 - 14 Marks
89
< = 23 - 12 Marks
< = 25 - 10 Marks
> 25.0 - 0 Marks
Note: Minimum 75% should be Regular/ full time faculty and the remaining shall be
Contractual Faculty as per AICTE norms and standards.
The contractual faculty (doing away with the terminology of visiting/adjunct faculty,
whatsoever) who have taught for 2 consecutive semesters in the corresponding academic
year on full time basis shall be considered for the purpose of calculation in the Student
Faculty Ratio. 5.1.1. Provide the information about the regular and contractual faculty as per
the format mentioned below:
5.1.1. Provide the information about the regular and contractual faculty as per the
format mentioned below:
Total number of regular
faculty in the
department
Total number of
contractual faculty in the
department
CAY (2017-18) 11 + 4* =15 5+3**=8
CAYm1(2016-17) 11 5
CAYm2(2015-16) 11 5
Note : * Faculties appointed by NPIU (MHRD)
** Adjunct faculties
5.2. Faculty Cadre Proportion (20)
The reference Faculty cadre proportion is 1(F1):2(F2):6(F3)
F1: Number of Professors required = 1/9 x Number of Faculty required to comply with 15:1
Student-Faculty ratio based on no. of students (N) as per 5.1
F2: Number of Associate Professors required = 2/9 x Number of Faculty required to comply with
15:1 Student-Faculty ratio based on no. of students (N) as per 5.1
F3: Number of Assistant Professors required = 6/9 x Number of Faculty required to comply with
90
15:1 Student-Faculty ratio based on no. of students (N) as per 5.1
Year
Professors Associate Professors Assistant Professors
Required
F1 Available
Required F2 Available Required F3 Available
2.133 7 4.266 4 12.8 12
CAY (2017-18)
CAYm1(2016-
17) 2.111 3 4.222 4 12.667 9
CAYm2(2015-
16)
2.111 3 4.222 4 12.667 9
Average
RF1=2.118
AF1=4.33
3 RF2=4.237 AF2=4 RF3=12.711 AF3=10
Numbers
Table B.5.2
Cadre Ratio Marks � ��AF1RF1� � �AF2 � 0.6
RF2 � � �AF3 � 0.4RF3 �� � 10
Cadre Ratio Marks=29.265
91
5.3. Faculty Qualification (20)
FQ =2.0 x [(10X +4Y)/F)] where x is no. of regular faculty with Ph.D., Y is no. of regular faculty
with M. Tech., F is no. of regular faculty required to comply 1:15 Faculty Student ratio (no. of
faculty and no. of students required are to be calculated as per 5.1)
X Y F FQ=2.0 x [(10X +4Y)/F)]
CAY (2017-18) 8 3 9.2 9.58
CAYm1(2016-17) 7 4 19 9.052
CAYm2(2015-16) 7 4 19.2 8.958
Average Assessment 9.197
Table B.5.3
5.4. Faculty Retention (10)
No. of regular faculty members in CAYm2= 11 CAYm1= 11 CAY= 11
Item
Marks
(% of faculty retained during the period of assessment keeping CAYm3 as base year)
>=90% of required Faculty members retained during the period of three academic 10
years keeping CAYm3 as base year
>=75% of required Faculty members retained during the period of three academic
08
years keeping CAYm3 as base year
>=60% of required Faculty members retained during the period of three academic
06
years keeping CAYm3 as base year
92
>=50% of required Faculty members retained during the period of three academic
04
years keeping CAYm3 as base year
<50% of required Faculty members retained during the period of three academic years
0
keeping CAYm3 as base year
Table B.5.4
5.5. Faculty competencies in correlation to Program Specific Criteria (10)
Name of the Faculty
Member
Specialization Publication Competency for Pos
Dr. Pankaj Agarwal Production 87 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12 ,PSO1,PSO2
Dr. Lokesh Bajpai Production 45 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1,PSO2
Dr. Sanjay Katarey Thermal 25 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO2
Dr. P L Verma Production 55 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1,PSO2
Dr. Ashish Manoria Advance Production
System
60 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,
PO10,PO11,PO12,PSO1,PSO2
Sandeep Jain Design 20 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1,PSO2
Sanjay Jain Advance Production
System
35 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1,PSO2
Dr. S.K. Dhakad Energy 49 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,
PO10,PO11,PO12,PSO2 Dr. Ravindra Mohan Production and
Operations
18 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO2
93
management
Dr. Chandra Pal
Singh
Design 10 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1,PSO2
Neeraj Sen C.I.M.(Computer
Integrated
.Manufacturing)
02 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1,PSO2
Jagdish Prasad
Shakya
Maintenance Engg. 03 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1
Kamlesh Kumar
Sharma
Thermal Engg. 05 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO2
Sachin Sen C.I.M.(Computer
Integrated
.Manufacturing)
02 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1
Gayatri Kushwah Industrial Engg. &
Maintenance
02 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1
Prachi Kanherkar Production
Engg.(comp.
Integrated Mfg.)
02 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO2
Dr. Ashish Khaira Condition Monitoring,
Manufacturing
12 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1
Rakesh Mangore Aerospace Propulsion Nil PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO2
Dr. M. Mohsin Khan Composite materials
and Tribology
12 PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO1
Ajay Sonare Thermal Engineering Nil PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11,PO12,PSO2
94
5.6. Innovations by the Faculty in Teaching and Learning (10)
Faculty members provide quality study materials to enrich students.
� Mode of teaching in this institute is not only limited to the traditional Chalk & Talk
methods, but also an amalgamation of the modern technology (e.g. power point
presentation, audiovisual teaching etc.) with the traditional one.
� The course files are distributed among the students by the subject teacher well in
advance of the commencement of the class.
� Faculty shares the study materials among the students via e-mail, websites, hand-outs
etc.
� The biggest resource for self-learning is obviously the college library. The college library
not only possesses plenty of books to meet the students’ syllabus-oriented needs, but it
also houses numerous books by eminent national and international authors on a variety
of topics which students may regularly access to sharpen and broaden their knowledge.
The library also possesses a number of magazines and periodicals related to different
branches of science and technology which the students may readily access.
� The library also subscribes to a host of online and printed journals which are also made
readily available to the students.
� The library also includes a computer room with internet access which is often used by
students to access various forms of e-materials for their self-development.
� Students are encouraged to visit NPTEL lectures, browse different internet sites to
increase their knowledge base about the subject. Moreover, through these activities
students acquire relevant knowledge which is beyond the syllabus as per the university
curriculum.
� This apart, students are also endowed with various resource materials by the teachers for
their self-development and they are also encouraged by them to participate in various
competitions of technical innovations for which again they have to participate in
innovative thinking and experimentations.
95
� The Tech-Fest (Technovision) organized by the college also serves to create opportunities
for students’ self development based on extra-syllabus technological knowhow.
� Management regularly organizes Soft Skill classes for various departments, based on
availability and requirement, to enhance the students’ communication skills, grooming
and body language to equip them for the professional world.
96
5.7. Faculty as participants in Faculty development/training activities/STTPs (15)
A Faculty scores maximum five points for participation
Participation in 2 to 5 days Faculty/faculty development program: 3 Points
Participation>5 days Faculty/faculty development program:5 points
Name of the Faculty Max. 5 per faculty
2017-18 2016-17 2015-16
Dr. Pankaj Agarwal 0 0 5
Dr. Lokesh Bajpai 0 0 5
Dr. Sanjay Katarey 0 0 5
Dr. P. L. Verma 0 0 3
Dr. Ashish Manoria 0 3 5
Prof. Sandeep Jain 0 0 5
Prof. Sanjay jain 0 0 5
Dr. S. K. Dhakad 3 5 0
Dr. R. M. Saxena 5 5 5
Dr. C. P. Singh 5 0 0
Prof. Neeraj Sen 5 0 0
Prof. J. P. Shakya 5 5 3
Prof. Kamlesh Sharma 5 5 3
Prof. Gayatri Kushwaha 5 0 5
Prof. Sachin Sen 5 3 3
Prof. Prachi Kanherkar 5 5 5
Dr. Ashish Khaira 5 5 5
Prof. Rakesh Mangore 5 0 0
97
Prof. Ajay Sonare 5 0 0
Dr. M. Mohsin Khan 5 0 5
Prof. Subhash C.Jain
Prof. S.C. Saxena
Prof. Suresh C. Jain
Sum 63 36 52
RF= Number of Faculty
required to comply
with 15:1 Student-Faculty
ratio as per 5.1
19.2 19 19.2
Assessment = 3 × (Sum/0.5RF)
(Marks limited to 15) 19.6875 11.368421 16.25
Average assessment over three years (Marks limited to 15) = 15.76864
Table B.5.7
98
5.8. Research and Development (75)
5.8.1. Academic Research (20)
Academic research includes research paper publications, Ph.D. guidance, and faculty receiving Ph.D. during the assessment period.
Number of quality publications in refereed/SCI Journals, citations, Books/Book Chapters etc. (15)
Name of Faculty: Dr. Pankaj Agarwal
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Micro Electro chemical
Machining of Micropin
Tool using Ultrasonic
Vibration Polishing,
PP110-113,
Published in
International Journal of
Mechanical and
Production Engineering
ISSN: 2320-2092 May 2015
02 Optimization of various
performance
parameters in Micro
Electrical Discharge
Machining Process using
Taguchi Method, pp
655-658
International Journal of
Science and Research
(IJSR)
ISSN 2319-7064 Impact Factor (2014)
: 5.611
October 2015
99
03 Comparative Study of
Supplier Selection by
Using Analytical
Hierarchy Process in
Supply Chain
Management, pp 64-67,
International Journal of
Scientific Research
ISSN: 2277-8179 Impact factor 3.2416 January 2016
04 Optimization of Micro-
EDM Process and its
performance
Characteristics, pp 1-11
International Journal of
Modern Trends in
Engineering and
Research, (IJMTER)
ISSN (online) 2349-9745,
ISSN (Print) : 2393-8161
impact factor (SJIF):
3.518
March 2016
05 Importance of heat
transfer and fins in light
weight automobile
engine, pp: 43-47
International journal of
research in
aeronautical and
mechanical
engineering
ISSN (online): 2321-3051 April 2016
06 Weightage Allocation
to influential
parameters in FSW for
yield strength
Evaluation, pp 04-08
International Journal of
Engineering Research
and Applications
ISSN : 2248-9622 May 2016
07 Thermal Study of Fins In
Light Weighted
Automobile Vehicles, pp
251-254
International Research
Journal of Engineering
and Technology (IRJET)
ISSN: 2395-0072 Impact Factor value:
5.181
Feb -2017
100
08 CFD Analysis on Circular
Fins in light weight
Automobile Vehicle, pp:
58-63
International journal
for research in Applied
Science & Engineering
Technology (IJRASET)
ISSN: 2321-9653 impact factor :
5.969,Thomson
reuters researcher
id : N-9681-2016, IC
Value: 45.98
March 2017
09 Implementing Latest
Techniques and Tools
for Modeling and
Analysis of piston to
enhance the
performance by using
different Materials,
International Journal of
Innovative Research In
Science Engineering
and Technology
(IJIRSET)
ISSN (on line) : 2319-8753,
ISSN (print): 2347-6710
Impact Factor: 6.209 March 2017
10 Effect of change in
piston made of different
materials on applying
Thermal and Static
loading conditions
International Journal
for Research
Publication & Seminar
ISSN: 2278-6848 January- March 2017
11 Comparative Study of
Single Point Incremental
Sheet Forming on
conventional setup and
flexible Hydraulic
Support Setup, pp 5452-
5460
published in
International Journal
materials Todays
proceeding ( ELSEVIER
publication)
ISSN (O) :- 2349-3585 July 2017
101
12 Incremental Sheet
Forming with Flexible
Hydraulic Supports
Published in e- journal
“ International Journal
for Scientific Research
& Development
ISSN (On Line): 23210613 July 2017
13 Effect of TiC particles on
the mechanical
properties of aluminium
alloy metal matrix
composites (MMCs), pp
5452-5460
published in
International Journal
materials Todays
proceeding ( ELSEVIER
publication)
2017
Name of Faculty: Dr. Lokesh Bajpai
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Design, Analysis and
Optimization of Four
Stroke S.I. Engine Piston
using finite element
Analysis in ANSYS
Software
Pp 16-27
International Journal of
Adcanced Engineering
and Research
Development Vol. 3,
Issue 9, 2016
2348-4470 2016
02 Design, Analysis and
Optimization of Four
International Journal of
Scientific Research and
23210613 2016
102
Stroke S.I. Connecting
Rod using finite Element
Analysis with the help of
CAD Software
Pp133-142
Development Vol. 4,
Issue 7, 2016
(online)
03 Analysis of NACA 4412
Airfoil using
Computational Fluid
Dynamics in ANSYS
Software
Pp 411-413
IJSRD Vol. 4,Issue 7,
2016
23210613
(online)
2016
04 Adjoint based
Optimization of
NACA4412 Aerofoil
using ANSYS Fluent
pp 418-420
IJSRD Vol. 4,Issue 7,
2016
23210613
(online)
2016
05 Simplifying Six Sigma
Methodology using
Shainin D.O.E
pp 363-368
International Journal of
Advanced engineering
and Research
Development
e ISSN (O)
2348-4470 p-ISSN (P): 2348-
6406
2016
06 Simplifying six sigma
methodology using
International Journal of
Advance Engineering
and Research
e-ISSN (O): 2348-4470 p-
ISSN (P) 2348-6406, Vol. 3,
March -2016
103
shainin d.o.e” p 363-368 Development Issue 3,
Name of Faculty: Dr. Sanjay Katarey
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Analyzing a case of
vendor selection model
for Indian industries of
all categories through
known procedure of
AHP.
23 International
Conference on
Multiple Criteria
Decision Making
at Helmut –Schmidt-
University Hamburg
Germany
2015
02 “Performance Improvement of Air Conditioning System using Applications of Evaporative Cooling: A Review Paper”
SSRG International
Journal of Thermal
Engineering (SSRG-
IJTE) September to
October 2016
2/2016/1-5
volume 2 Issue 5 2016
03 Comparative Analysis on Performance of a Forced Draft and
Presented in
International
2017
104
Natural Draft Counter Flow Cooling Tower
Conference on
Mechanical, Energy
and Power Systems,
20-21 January 2017, at
OIST Bhopal
04 A Review of Vapour
Compression
Refrigeration System
With Evaporative
Cooling condenser
Presented in National
Conference on
Innovative Research in
Engineering and
Science,16th
Feb 2017,
at SATI Vidisha
05 Carbon Dioxide using as
an Alternative
Refrigerant in Air
Conditioning System
Presented in National
Conference on
Innovative Research in
Engineering and
Science,16th
Feb 2017,
at SATI Vidisha
Name of Faculty: Prof Sandeep Jain
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Design, Analysis and
Optimization of Four
Stroke S.I. Engine Piston
International Journal of
Advanced Engineering
and Research
2348-4470 4.72 Vol. 3, Issue 9, 2016
105
using finite element
Analysis in ANSYS
Software
Pp 16-27
Development
02 Design, Analysis and
Optimization of Four
Stroke S.I. Connecting
Rod using finite Element
Analysis with the help of
CAD Software
Pp133-142
International Journal of
Scientific Research and
Development
23210613
(online)
4.396 Vol. 4, Issue 7, 2016
03 Analysis of NACA 4412
Airfoil using
Computational Fluid
Dynamics in ANSYS
Software
Pp 411-413
International Journal of
Scientific Research and
Development
23210613
(online)
4.396 Vol. 4,Issue 7, 2016
04 Adjoint based
Optimization of
NACA4412 Aerofoil
using ANSYS Fluent
pp 418-420
International Journal of
Scientific Research and
Development
23210613
(online)
4.396 Vol. 4,Issue 7, 2016
106
05 Aerodynamics of 3D
Wing with Winlet: A
Computational Fluid
Dynamics Study using
Fluent
International Journal of
Scientific Research and
Development
ISSN 2310613 4.396 Vol. 4,Issue 6, 2016
06 Investigation on 3D
Wing of Commercial
Aeroplane with Aerofoil
NACA 2415 using CFD
Fluent
International Journal of
Scientific Research and
Development
ISSN 2310613 4.396 Vol. 4,Issue 6, 2016
07 Use of MQL Technique
to on Different
Specimen during
Turning Operation and
Calculation of Grey
Relational Co-efficient
International Journal of
Scientific for Research
in Applied Science &
Engg. Technology
ISSN 2321-9653 Vol. 6,Issue 2, 2018
Name of Faculty: Prof Sanjay Jain
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 “Various aspect of Six
Sigma in manufacturing
Proceedig International
Conference on
2015
107
Industries”, pp-382-387
Industrial Engineering
2015(ICIE - 2015)
02 “Comparison of
Dynamic scheduling
techniques in Flexible
Manufacturing
Systems” pp 1-4
International Journal
Engineering Research
and Applications
ISSN:2248-9622 Vol-5, Issue-7(Part-II)
2015
03 “A Simulation
Technique: Petri Net
Used in Manufacturing
Application: A review”
pp. 343-349
International Journal of
Advance Engineering
and Research
Development
e-ISSN (O): 2348-4470 p-
ISSN (P): 2348-6406
(SJIF): 4.14 Vol. 3, Issue 3, March
2016
04 “Overview of CuSiC
Composite Material”
pp.1-19
International Journal
for Scientific Research
& Development (IJSRD)
ISSN (online): 2321-0613 IF 4.396 Vol. 4, Issue 06, 2016
05 “Six Sigma - Indian
contribution to the
research” pp.112–145
Int. J. Six Sigma and
Competitive Advantage
ISSN online: 1479-2753
ISSN print: 1479-2494
- Vol. 10, No. 2, 2016
06 “Improvement in
Process capability of
Coating process in CFL
manufacturing”
Six-Sigma Forum
Magazine, American
Society of Quality
(ASQ)
ISSN: 1539 2016
108
07 “Analysing the Effect of
Lean Manufacturing
Using Value Stream
Mapping Based
Simulation- a Case
Study at Glass
Processing Unit”
pp. 817-823
International Research
Journal of Engineering
and Technology (IRJET)
e-ISSN: 2395 -0056 p-ISSN:
2395-0072
IF5.181 Volume: 04 Issue: 01
Jan -2017
08 “Selection of Supplier
for Optimization of
Supply Chain using in
Engineering & Science”
pp-229-236
National Conference
on Innovative Research
in Engineering &
Science
ISBN No. 978-93-82346-18-
0
Fab-17
09 “Break Even Analysis of
a Briquettes production
Plant and density
determination of Rice
Soya husk Briquettes for
different composition”
pp 8 -13
Published in
International Journal of
Computer and
Advanced Engineering
Research (IJCAER)
p-ISSN: 2395-4523 Volume: 04 Issue: 01
Feb-2017
10 “Calculation of Physical
parameters of
Briquettes and its
effects on Costing” pp
10 -12
Published in
International Journal
Research in Technology
(IJRT)
p-ISSN: 2394-9007 Volume: 04 Issue: 01
Feb-2017
109
11 “Redundancy allocation
in an Industry using
multi objective
optimization –A
Review” pp
Published in
International Journal
for Research
publication and
Seminar(JRPS)
p-ISSN: 2278-6848 Volume: 8 Issue: 2 Jan-
March-2017
12 “Study of the Product
Failure Modes and
Effect Analysis (PFMEA)
on Welding Process” pp
7991-7996
International Journal of
Innovative Research in
Science Engineering
and Technology
ISSN(Online): 2319-8753 7.089 2017
13 “Lighting the Way using
Six-Sigma and Shainin
System tool to improve
the Coating process in
the manufacturing of
Compact Fluorescent
lamps” pp 5-14
Six-Sigma Forum
Magazine, American
Society of Quality
(ASQ)
ISSN: 1539-4069 Feb-2018
Name of Faculty: Dr. P L Verma
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 “Experimental approach
on study about
delamination in
International Journal of
Science, Technology
ISSN 2349-784x IF 0.5466 2015
110
composite materials”
pp.255-259
and Engineering (IJSTE) Vol. 1, Issue 12, 2015
02 “Role of Six Sigma in
Total Quality
Management’ pp.1045-
1049
International Journal of
Technological Research
in Engineering (IJTRE)
ISSN 2347-4718 IF 2.81 Vol. 7, Issue 7, 2016
03 “SIMPLIFYING SIX
SIGMA METHODOLOGY
USING SHAININ D.O.E”
pp. 363-368
International Journal
of Advance Engineering
and Research
Development
e-ISSN (O): 2348-4470 p-
ISSN (P): 2348-6406
(SJIF): 4.14 Vol. 3, Issue 3, March
2016
04 “A Simulation
Technique: Petri Net
Used in Manufacturing
Application: A review”
pp. 343-349
International Journal of
Advance Engineering
and Research
Development
e-ISSN (O): 2348-4470 p-
ISSN (P): 2348-6406
(SJIF): 4.14 Vol. 3, Issue 3, March
2016
05 “Overview of CuSiC
Composite Material”
pp.1-19
International Journal
for Scientific Research
& Development (IJSRD)
ISSN (online): 2321-0613 IF 4.396 Vol. 4, Issue 06, 2016
06 “An Effective
Integration of various
Influencing Criteria to
Analyse the Best
Supplier by Using
Analytic Hierarchy
International Journal of
Software & Hardware
Research in
Engineering (IJSHRE)
ISSN-2347-4890 IF 4.528 Volume 4, Issue 10,
October, 2016
111
Process in Supply Chain”
pp. 15-23
07 “Six Sigma - Indian
contribution to the
research” pp.112–145
Int. J. Six Sigma and
Competitive Advantage
ISSN online: 1479-2753
ISSN print: 1479-2494
- Vol. 10, No. 2, 2016
08 “Enhancement in the
Working Process of
Packaging Industries by
Grouping of Lean
Manufacturing & Six
Sigma” pp. 689-697
International Journal
for Scientific Research
& Development (IJSRD)
ISSN (online): 2321-0613 IF 4.396 Vol. - 4, Issue 08, 2016
09 “Analysing the Effect of
Lean Manufacturing
Using Value Stream
Mapping Based
Simulation- a Case
Study at Glass
Processing Unit” pp.
817-823
International Research
Journal of Engineering
and Technology (IRJET)
e-ISSN: 2395 -0056 p-ISSN:
2395-0072
IF5.181 Volume: 04 Issue: 01
Jan -2017
10. "Analysis of Various
Effects on Tensile
Strength and Yield
Strength in Friction Stir
Welding Due to
Different Influencing
International Journal
for Scientific Research
and Development(
IJSRD)
e-ISSN: 2321-0613 IF 4.96 Volume: 5, Issue 3,
2017
112
Factors" pp.1471-1474
11. "Impact of Different
Process Parameters on
the Strength of Welded
Joint in Friction Stir
Welding" pp.1140-1145
International Journal
for Research in Applied
Science and
Engineering
Technology (IJRASET)
ISSN: 2321-9653 IF 6.887 ISRA Journal
IF3.166
Volume 5, Issue VI,
June 2017
12. “RAPID PROTOTYPING -
A NEW CHANGE IN
MANUFACTURING
TECHNOLOGY” pp.
2348-6406
International Journal of
Advance Engineering
and Research
Development
e-ISSN (O): 2348-4470 p-
ISSN (P): 2348-6406
(SJIF): 4.14 Vol. 4, Issue 8, August
2017
13. “Use of Corrugated
Composite Sandwich
and Hexagonal
Honeycomb Plates for
Helmets” pp. 1472-1476
International Journal
for Scientific Research
& Development (IJSRD)
ISSN (online): 2321-0613 IF 4.396 Vol. 5, Issue 05, 2017
14. “Application of Various
Equipment Used In
Foundry for Prevention
of Pollution - A Review”
pp. 501-505
International Journal of
Scientific & Engineering
Research
ISSN 2229-5518 IF 4.2 Volume 8, Issue 10,
October-2017
Name of Faculty: Dr Ashish Manoria
113
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01
Review Technique for
Exploration of the
Manufacturing Line for
Improved Production
International Journal of
Science and Research
(IJSR)
ISSN (Online) : 2319-
7064,
Volume 4 Issue 9,
Impact Factor (2015) : 6.391
https://www.ijsr.net/
September 2015
02 Balancing The Line By
using Heuristic Method
Based on CPM in SALBP-
A case study
International Journal of Research in Engineering and Technology (IJRET)
E ISSN: 2319-1163
P ISSN : 2321-7308
Volume : 04 Issue :12,
3.935 (2015-16) December -2015
03 Increasing Line
efficiency with
COMSOAL, RPW and
LCR Methods of
Assembly Line Balancing
Problem
International Journal of
Software & Hardware
Research in
Engineering
ISSN-2347-4890
4.528 (2015)
http://sjifactor.com
/passport.php?id=1564
Volume 4 Issue 1
January 2016
04 Implementation on Line
BalancingTechniques
and Optimization of
Technologies for
Efficiency Improvement
International Journal of
Research in Mechanical
Engineering and
Technology (IJRMET)
ISSN: 2249-5762
(online)
ISSN : 2249 – 5770
(Print)
0.857 (2014)
http://www.ijrmet.com/
Vol.6, Issue 1-
April2016
114
05 An Effective Integration
of various
Influencing Criteria to
Analyse the Best
Supplier by Using
Analytic Hierarchy
Process in Supply Chain
IJournals: International
Journal of Software &
Hardware Research in
Engineering
ISSN-2347-4890
Impact Factor 2015 :
4.528
Volume 4 Issue 10
October, 2016
06 Analysing The Effect Of
Lean Manufacturing
Using Value Stream
Mapping Based
Simulation- A Case
Study At Glass
Processing Unit
International Research
Journal of Engineering
and Technology (IRJET)
e-ISSN: 2395 -0056
p-ISSN: 2395-0072
Impact Factor value:
5.181
ISO 9001:2008 Certified
Journal
Volume: 04 Issue: 01 |
Jan -2017
07 Rapid Prototyping - A
New Change In
Manufacturing
Technology
International Journal of
Advance Engineering
and Research
Development (IJAERD)
e-ISSN (O): 2348-4470
p-ISSN (P): 2348-6406
Scientific Journal of
Impact Factor (SJIF): 4.72
Volume 4, Issue 8,
August -2017
08 Use of Corrugated
Composite Sandwich
and Hexagonal
International Journal
for Scientific Research
& Development (IJSRD)
ISSN (Online) : 2321-
0613
Impact Factor : 4.396
http://ijsrd.com/images/I
Vol. 5, Issue 05,
September -2017
115
Honeycomb Plates for
Halmets
mpact_Factor.jpeg
Name of Faculty: Dr. S. K. Dhakad
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01
“Adsorption of Cr (VI) from Synthetic Tannery Wastewater by using Banyan Sawdust (Ficus Bengalensis) Adsorbent”
International Journal of
Engineering
Technology Science
and Research IJETSR
2394 – 3386 2.120
UGC Listed
2017
02 “J Integral and Crack growth analysis of 2-D Element”
International journal of
Latest Trend in
Engineering and
Technology
eISSN:2278-621X,
pISSN2319-3778
4.49
UGC listed
2018
03 “Experimental
Investigation of EDM
Parameters on Al-
LM6/SiC/B4C Hybrid
composites”,
International Journal of
Applied mechanics and
Materials
1662-7482 2018
116
04 “Life Prediction and Stress Intensity Factor (SIF) analysis for the base straight component and weld straight component (Pipes) used in the nuclear power plant” pp 5429-5434
Elsevier Journal
Materials Today
Proceedings
Vol.04, Issue 04, part D
2017
05 “Effect of TIC Particles
on the Mechanical
properties of aluminium
alloy Metal Matrix
Composites (MMCs)”
pp5452-5460.
Elsevier Journal
Published Material
Today Proceedings
6th
International
Conference on
Materials Processing
and Characterization
(ICMPC-2016),
Vol.04, Issue 04, part D
2017
Name of Faculty: Dr. Ravindra Mohan
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Multi Criteria Decision
Making in Automobile
Sector
pp 532-549
IJMEIT
2348-196x
2014
117
02 An Explanatory Study of
Lean Practices in job
shop production/
Special Job production /
Discrete Production /
Batch shop Production
Industries
pp 94-101
IJERA
2248-9622
2014
03 An approach to vendor
selection : A case study
IJETAE
2250-2459
2014
04 Design and
development of a piston
head for internal
combustion engine
using CMM – A review
pp 5-8
IJERA
2394-9910
2015
05 Assembly line balancing
– A review
pp 1-4
IJERS
2394-9910 2016
118
Name of Faculty: Dr C. P. Singh
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Finite Element Analysis
of Deep Drawing
Process to Investigate
Effect of Friction
pp. 759-767
International Journal of
Mechanical
Engineering &
Technology (SCOPUS
Indexed)
0976-6359 October 2017
02 Formability Analysis at
Different Friction
Conditions in Axis-
Symmetric Deep
Drawing Process
Pp 2411–2418
Materials Today:
Proceedings 4 (2017)
2214-7853
Proceedings 4 (2017)
03 Investigation of Effect of
Clearance between Die
and Punch in
Deep Drawing Process
International Journal of
Metallurgy and Alloys
2456-5113
Vol. 1: Issue 2, 2016
Feb 2017
119
pp 20-24
04 Simulation & Modelling
od Chasis for Small
Electric Car
National Conference
on Innovative Research
in Engineering &
Science
ISBN No. 978-93-82346-18-
0
Fab-17
05 Study of Deep Drawing
Process Parameters: A
Review pp 1-15
International Journal of
Scientific and Research
Publications,
ISSN 2250-3153
Volume 5, Issue 2, Feb-
15
06 Simulation & Modelling
of Deep Drawing
Process of SMA Material
pp 103-106
International Journal of
Scientific & Engineering
Research,
ISSN 2229-5518 Volume 6, Issue 2, Feb-
15 Feb-15
07 Simulation and
Modeling of Deep
Drawing Process using
Finite Element Method
ICMEETS – 14 pp 75-82
1st International
Conference on
Mechanical
Engineering: Emerging
Trends for
Sustainability
Jan- 14
120
Name of Faculty: Jagdish Prasad Shakya
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Application of Back
Propagation Neural
Network for
Improvement in Casting
Defects
Presented in Seminar
on Mathematical
Methods in Science
and Engineering 22nd
Dec 2016 at SATI
(Engg.College),Vidisha
2016
Name of Faculty: Kamlesh Sharma
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01
Performance Improvement of Air Conditioning System using Applications of Evaporative Cooling: A Review Paper Pp . 1-5
SSRG International Journal of Thermal Engineering (SSRG-IJTE) volume 2 Issue5 September to October 2016
2395 - 0250 volume 2 Issue 5
2016
02 Application of Back Presented in Seminar 2016
121
Propagation Neural
Network for
Improvement in Casting
Defects
on Mathematical
Methods in Science
and Engineering 22nd
Dec 2016 at SATI
(Engg.College),Vidisha
03 Comparative Analysis on Performance of a Forced Draft and Natural Draft Counter Flow Cooling Tower
Presented in International Conference on Mechanical, Energy and Power Systems, 20-21 January 2017 at OIST Bhopal
2017
04 A Review of Vapour
Compression
Refrigeration System
With Evaporative
Cooling condenser
pp 114-120
Presented in National
Conference on
Innovative Research in
Engineering and
Science,16th
Feb 2017,
at SATI Vidisha
ISBN No. 978-93-82346-18-
0
2017
05 Carbon Dioxide using as
an Alternative
Refrigerant in Air
Conditioning System
Presented in National
Conference on
Innovative Research in
Engineering and
Science,16th
Feb 2017,
at SATI Vidisha
ISBN No. 978-93-82346-18-
0
2017/
122
pp. 237-240
Name of Faculty: Gayatri Kushwah
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01.
“Analysis of
Environmental Impact
of 4 Stroke Petrol
Engine by Using Eco
Indicator 99 Method”
pp 676-685
International Journal of
Scientific and Research
Publications,
ISSN 2250-3153
February 2013
02. “Analysis of Smoke of
Diesel Engine by Using
Biodiesel as Fuel”
International Journal of
Scientific and Research
Publications
ISSN 2250-3153
April 2013
123
pp 318-322
Name of Faculty: Sachin Sen
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Integration of Process
Planning and Scheduling
Comparison of Models
Approach pp 215-219
IJSR
ISSN: 2319-7064
6.391
2012
02 Alternate process
planning and scheduling
of FMS system
IJRAET ISSN: 2347-2812 3.93 2013
124
Name of Faculty: Dr. Ashish Khaira
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01.
A Review of the State-of-the-Art on Combining Multiple NDT Techniques in Terms of Precise Fault Detection. Innovation, 7(3), 169-187.
International Journal of
Engineering and
Technology
ISSN: 2223-5329 --- 2017
02. Identification of Critical Component to Enhance Equipment Availability in a Graphite Manufacturing Industry, 7(3), 25-32.
International Journal of
Mechanical and
Production Engineering
Research and
Development
ISSN: 2249-6890 --- 2017
03. Risk Based Maintenance- A Unique Approach of Maintenance Management, 29 (2), 22-27.
Asset Management &
Maintenance Journal
ISSN: 1835-789X --- 2016
04. A State of the Art Critical Review of NDT Techniques and Its Development: A Review of more Than a Decade of Research.
Journal of Advanced
Information Science
and Technology
ISSN: 2319-2682 --- 2016
125
International, 5(7), 19-37
05.
Analysis of relation between ultrasonic testing and microstructure: a step towards highly reliable fault detection., 35(2), 87-96.
Engineering Review
Journal
ISSN: 1330-9587 --- 2015
06. Comparative Analysis of Different Steel Grades for Francis Turbine Spiral Casing & Modification in Maintenance Strategy for Cavitations Prevention., 13 (4), 179-187
Chemical Science
Review and Letters
ISSN: 2278-6783 --- 2015
Name of Faculty: Dr. M. Mohsin Khan
S.
No
Title with page No. Journal ISSN /ISBN No. Impact Factor Year of Publication
01 Abrasive Wear
Response of SiC p
Reinforced ZA-43 Alloy
Metal Matrix Composite
Indian Journal of
Science and
Technology
0974-5645 2016
126
02 Effects of SiCp
Reinforcement on the
Abrasive Wear
Properties of Al-Si Alloy
International Journal of
Engineering and
Technology
0975-4024 2016
03 Effect of test
environments on
erosive wear response
of SiCp reinforced
aluminium based metal
matrix composite
Journal of Mechanical
Engineering and
Sciences
2231-8380 2017
04 Abrasive Wear
Characteristics of Silicon
Carbide Particle
Reinforced Zinc Based
Composite
1876-9918 SCI: 0.826 2017
05 High-Stress Abrasive
Wear Response of Zinc-
Based Alloy: A
Comparison with Grey
Cast Iron, pp.
487-492
International Journal
for Research in Applied
Science & Engineering
Technology
2321-9653
2017
06 Comparative Study on
the High-Stress Abrasive
International Research
Journal of Engineering
2395-0056
127
Wear Behaviour of Zinc
and Copper Base pp.
1398-1403
and Technology
08 Effects of Test
Parameters and SiCp
Reinforcement on the
Slurry Erosive wear
response of Al-Si Alloy
Materials Today:
Proceedings 4 (2017)
3141–3149
2214-7853
2017
09 Comparative study on
erosive wear response
of SiC reinforced and fly
ash reinforced
aluminium based metal
matrix composite
Materials Today:
Proceedings 4 (2017)
10093–10098
2214-7853
2017
10 Effect of T6 Heat
Treatment on
Microstructure,
Mechanical Properties
and Abrasive Wear
Response of Fly Ash
Reinforced Al-Si Alloy
Materials Today:
Proceedings 4 (2017)
10062–10068
2214-7853
2017
11 Sliding wear studies of
zinc based alloy, its
composite & cast iron:
International Journal of
Chemical, Molecular,
Nuclear, Materials and
- 2016
129
Ph.D. guided /Ph.D. awarded during the assessment period while working in the institute (5)
S.No. Research Guide Name of
Scholar
Topic of Research University &
year of
Registration
Status
1.
Dr. Pankaj Agarwal
PAWAN
KUMAR
UPADHYAY
“Study and analysis
of Ballizing process
for superfinishing
the internal surface
with evaluation of
different forces”
Barkatullaha
University,
Bhopal,
2014
Submitted
Prem Narayan
Ahirwar
“Multi Goal Multi
Facility Location
Problem in a
Modified Plant
Layout”
Barkatullaha
University,
Bhopal,
2017
On Going
L.P.
Dhamande
Analysis and
development of
TPM (Total
Productive
Maintenance)
strategy for Indian
industries”
Barkatullaha
University,
Bhopal
Awarded in
2008
Suresh c. Jain Development of
Lean Production
Policies.
R.G.P.V.,
Bhopal
On Going
Shri krishna
dhakad
“Energy Modelling
and Optimization of
Molton Carbonate
Fuel Cell”
Barkatullaha
University,
Bhopal
Awarded in
2014
Pawan kumar
upadhyay
“Study and analysis
of Ballizing process
for superfinishing
the internal surface
with evaluation of
Barkatullaha
University,
Bhopal
Submitted
130
different forces”
Hitesh kumar “Energy Modelling
and Optimization
using hybrid
system of Wind
and Biomass”
Barkatullaha
University,
Bhopal
Awarded in
2014
Prem Narayan
Ahirwar
“Multi Goal Multi
Facility Location
Problem in a
Modified Plant
Layout”
Barkatullaha
University,
Bhopal
On Going
2.
Dr. Lokesh Bajpai
N. V.
Halegowda
A Frame Work for
Knowledge
Management and
its Application for
Industrial
Excellence", B.U.
Bhopal.
BU Bhopal Awarded
M. M. Patil “Design
Improvement in
Motor Cycles by
Ergonomics Point of
View using CAD”
RGPV BHOPAL
RGPV BHOPAL Awarded
Sandeep Jain, Elastohydrodynamic
(EHD) Analysis of
Plain Circular and
Two Lobe Journal
Bearing (Thesis
submitted) in RGPV
BHOPAL
RGPV BHOPAL Thesis
submitted
Ashish
Manoria
Assembly Line
Balancing Using
Expert System in
RGPV BHOPAL
RGPV BHOPAL Awarded
Sanjay Jain FMS Scheduling:
Some Studies
(Thesis to be
submitted) in RGPV
RGPV BHOPAL In Progress
131
BHOPAL
3. Dr. Sanjay Katarey
R M Saxena Study of factor
analysis of vendor
selection and
outsourcing in
supply chain
management for
manufacturing and
hardware
industries.
Bhopal
University
2007
Awarded
Kamlesh
Sharma
Vipin Mehta
Registered. Title yet
to be finalized.
Bhopal
University
2015
RGPV 2017
On going
4. Dr. S. K. Dhakad Dinesh
Agarwal
Fatigue Life analysis
of straight pipe
component
2017 RDC
Complete
132
5.8.2. Sponsored Research (20)
NIL
Funded research from outside:
(Provide a list with Project Title, Funding Agency, Amount and Duration)
Funding Amount (Cumulative during last three academic years starting from CAYm1):
Amount > 50 Lacs – 20 Marks,
Amount > 40 and < 50 Lacs – 15 Marks,
Amount > 30 and < 40 Lacs – 10 Marks,
Amount > 15 and <30 Lacs – 5 Marks,
Amount < 15 Lacs – 0 Marks
133
5.8.3. Development activities (15)
Product Development
S.No. Project title Research Laboratory
1. Fabrication and Feasibility Report of Electricity
Generation by (Human Powered) GYM BICYCLE
Worksop
2. Fabrication of Gearless Transmission System in
Angular Positions
DOM Lab
3. Design Analysis and Fabrication of VORTEX TUBE RAC Lab
4. Design Analysis and Fabrication of Auto Stamp
Machine using Geneva Mechanism
DOM Lab
5. Design Analysis and Fabrication of an Automatic
Tyre Inflation System
Worksop
6. Design and Fabrication of Air Compressor Worksop
7. Design and Fabrication of Solar Energy Driven
Bucket Elevator
Worksop
8. Fabrication of Hybrid Energy (Solar + Wind)
Generation System
Worksop
Research laboratories
1. Department has CAD lab with latest software of design and separate FMS and CNC lab for research activities by the faculty and students of UG and PG.
2. Department has an innovation club through which student as well as faculty undertake research.
Instructional materials
Instruction materials such as model, charts, Lab Manuals, data sheet, PPTs, handouts, subject notes are made available.
Working models/charts/monograms etc.
134
Charts displayed in all Laboratories. The department has many models created by students and has been displayed in research Laboratory. These prototype models help the students to understand the working of basics and recent technologies in a better manner. Also, this can be used for better teaching and learning process
5.8.4. Consultancy (from Industry) (20)
NIL
(Provide a list with Project Title, Funding Agency, Amount and Duration)
Funding Amount (Cumulative during last three academic years starting from CAYm1):
Amount >10 Lacs – 20 Marks,
Amount <10 and > 8 Lacs – 15 Marks,
Amount < 8 and > 6 Lacs– 10 Marks,
Amount < 6 and > 4 Lacs–5 Marks,
Amount < 4 and > 2 Lacs– 2 Marks,
Amount <2 Lacs – 0 Mark
5.9. Faculty Performance Appraisal and Development System (FPADS) (10)
135
Faculty members of Higher Educational Institutions today have to perform a variety of tasks pertaining to diverse roles. In addition to instruction, Faculty members need to innovate and conduct research for their self-renewal, keep abreast with changes in technology, and develop expertise for effective implementation of curricula. They are also expected to provide services to the industry and community for understanding and contributing to the solution of real life problems in industry. Another role relates to the shouldering of administrative responsibilities and co-operation with other Faculty, Heads-of-Departments and the Head of Institute. An effective performance appraisal system for Faculty is vital for optimizing the contribution of individual Faculty to institutional performance.
The assessment is based on:
A well-defined system for faculty appraisal for all the assessment years (5)
Its implementation and effectiveness (5)
Faculty Performance Appraisal letter is collected from each faculty in which they need to show their innovations and research for their self-renewal to cope up with changes in technology and develop expertise for effective implementation of curricula. The format of Faculty Performance Appraisal letter is provided in annexure.
Key Points
• Personal Information
• Teaching and Lab work
• Performance of Students in end sem exam for subjects taught during previous
sem/session
• Teaching learning and evaluation related activities
� Direct teaching
� Exam duty (Paper setting, Evaluation, Invigilation)
� Innovative teaching learning methodology, updating subject
content, course, mentoring etc.
• Professional development co-curricular and extension activities
� Student related co-curricular and extension activities, field and
field based activities like remedial classes, career counselling,
Seminar and other events like NCC, NSS, extension and
dissemination activities.
136
• Contribution to corporate life and management of the department and institution
through participation in academic and administrative committees and
responsibilities (i) Administrative responsibility (including as Dean/ Principal/
Chairperson/ Convener/ Teacher incharge/ similar other duties that require regular
office hrs. for its discharge) (ii) Participation in Board of Studies. Academic and
Administrative Committees.
• Professional Development activities (such as participation in seminars,
conferences, short term training courses, industrial experience talks lectures In
refresher/ faculty development courses, dissemination and general articles and any
other contribution)
• RESEARCH AND ACADEMIC CONTRIBUTIONS like Research papers
published, Publications other than journal articles (books, chapters in books),
RESEARCH PROJECTS, RESEARCH GUIDANC, Fellowships awards and
invited lectures delivered in conference/ seminars
• Self Development through upgrading Qualification (including Open University
Courses)/Teaching or Learning New Subjects etc
• Use of Library Journals/ Books apart from the books mentioned in the Syllabi to
Supplement your knowledge and information:
• Details of Leaves taken during the said period (Number of days):
• Details of Memos/Warning/Note/Punishment etc. during the period of this report:-
-
• Future Planning in Consultation with Higher Authorities
5.10. Visiting/Adjunct/Emeritus Faculty etc. (10)
Adjunct faculty also includes Industry experts. Provide details of participation and contributions in teaching and learning and /or research by visiting/adjunct/Emeritus faculty etc. for all the assessment years: Provision of visiting/adjunct faculty (1)
Minimum 50 hours per year interaction with adjunct faculty from industry/retired professors etc.(9)
(Minimum 50 hours interaction in a year will result in 3 marks for that year; 3marks x 3years=9marks)
S.No. Name of faculty Qualification Institute Name Nature of
Assiciation
137
1. Prof. Subhash C. Jain M.Tech S.A.T.I. Vidisha Adjunct
2. Prof. S.C. Saxena M.Tech S.A.T.I. Vidisha Adjunct
3. Prof. Suresh C. Jain M.Tech S.A.T.I. Vidisha Adjunct
138
CRITERION 6 Facilities and Technical Support 100
6.1 Adequate and well equipped laboratories, and technical manpower (40)
Sr.
No.
Name of
the
Laboratory
No. of
students
per
setup
(Bat
ch Size)
Name of the
Important
Equipment
Weekly
utilization
status (all
the
courses
for which
the lab is
utilized)
Technical Manpower support
Name of the
technical
staff
Designation Qualificatio
n
1. Material
Science
30 1.Muffle furnace,
2.Experimental
setup for
determination of
carbon in steel &
iron,
3.Electric furnace,
4.Grinding &
polishing machine
4 hrs Sh. C.B.
Vishwakarma
Skilled
Workman
B.A.
139
2. Dynamics of
Machines
30 1.Epicyclical Gear
Train & Holding
Torque test kit.
2.Whirling speed
of Shaft,
3.Balancing test rig
4.Journal Bearing
test rig,
5.Coriolis
Components of
Acceleration
apparatus
4hrs Sh. C.B.
Vishwakarma
Skilled
Workman
B.A.
3. Refrigeration
and Air
Conditioning
30 1.Experimental
Cooling Tower.
2. Vapour
Compression
Refrigeration Test
Rig.
3.Experimental Air
Conditioner
Simulator.
4. Experimental
Air Conditioner
Trainer.
5.Absorption
Refrigeration
Demonstration
System.
6. Window Air
Conditioner
Trainer.
4hrs Sh. M. Amin
Mansoori
Lab.
Technician
B.Sc.
(Maths),
PGDCA
4. Heat and Mass 30 1.Parallel flow and
counter flow heat
4 hrs Sh. M. Amin Lab. B.Sc.
140
Transfer exchanger, Film
2.Condensation
apparatus,
3.Critical heat flux
apparatus
Mansoori Technician (Maths),
PGDCA
5. Heat Engine 60 1.Petrol Engine
Test Rig,
2.Diesel Engine
Test Rig
2 hrs Sh. K. L.
Yadav
Instructor Diploma
(ITI Mech)
6. Measurement
/Mechatronics
30 1.Digital trainer kit
for pressure
measurement
2.Digital trainer kit
for temperature
measurement
3.Digital trainer kit
for torque
4.measurement
5.Digital trainer kit
for displacement
measurement
6.Digital trainer kit
for strain
measurement
7.Digital trainer kit
for angle
measurement
4hrs Sh. C.B.
Vishwakarma
Skilled
Workman
B.A.
7. Automobile 30 1.Gear Box
(Working):
2.Cut Section
Model (Working):
4 hrs Shri Baijnath
Ahirwar
Technical
Assistant
B.E.,
M.Tech
141
suitably mounted
on a sturdy Iron
frame
3.Cut Section
Model of
Complete
front Suspension
with Longitudinal
Torsion bar
8. CAD 30 1.Software for
Finite Element
Analysis
2.Design
Workstations
3.Plotter (A1 Size)
4.3D Mouse
4 hrs Sh. D. Shah Programmer M.Tech.
(Mech)
9. FMS 30 1.CNC Lathe
Machine,
2.FMS System
4 hrs Sh. D. Shah Programmer M.Tech.
(Mech)
Table B.6.1
6.2. Laboratories maintenance and overall ambiance (10)
1. Do’s and Don’ts and Safety measures rules are displayed in each laboratory.
2. Well Technical Staff are available.
3. Servicing of each laboratory is doing frequently.
4. In all necessary PC systems, regular software like Microsoft office, browser, lab software etc.
have been installed and maintained.
142
Ambiance:
1. Department has Full furnished with well-equipped equipment which shall cater to UG course
as per curriculum requirements.
2. Conditions of chairs/benches are in good condition.
3. Department has experienced faculty to educate them in all the fields of engineering.
4. Laboratories are conducted every week. As per the institute curriculum.
5. Labs are equipped with sufficient hardware and licensed software to run program specific
curriculum and off program curriculum.
6. Laboratory manual are available to students.
7. Lighting system is very effective in every lab.
8. Each Lab is equipped with white/black board.
9. Exclusively, a project lab has been provided for the students to carry out their mini and major
project work.
6.3. Safety measures in laboratories (10)
The following safety measures are used in all the labs: Specific Safety Rules like Do’s and Don’ts are displayed and instructed for all students.
First aid box and fire extinguishers are kept in each laboratory.
Students are supposed to wear Lab Apron.
Well trained technical supporting staff monitor the labs at all times.
Damaged equipments are identified and serviced at the earliest.
Periodical calibration of the lab equipments are regularly done
Clean and organized laboratories are maintained
The use of cell phones is prohibited.
Appropriate storage areas are available.
Fully and rightly loaded PC Systems with needed software are readily available for students’ usage.
143
6.4. Project laboratory (20) A Central workshop is equipped with fabrication and manufacturing facilities. Students use central workshop for fabricating their final year projects. Further other laboratories are also used to extend project laboratories.
Sr.
No.
Name of the Laboratory Name of Equipments Usage
1. Material Science 1.Muffle furnace,
2.Experimental setup for
determination of carbon
in steel & iron,
3.Electric furnace,
4.Grinding & polishing
machine
Used as Laboratory in B.E.
Curriculum
Students Project Work
2. Dynamics of Machines 1.Epicyclical Gear Train &
Holding Torque test kit.
2.Whirling speed of Shaft,
3.Balancing test rig
4.Journal Bearing test rig,
5.Coriolis Components of
Acceleration apparatus
Used as Laboratory in B.E.
Curriculum
Students Project Work
SAE club students
3. Refrigeration and Air
Conditioning
1.Experimental Cooling
Tower.
2. Vapour Compression
Refrigeration Test Rig.
3.Experimental Air
Conditioner Simulator.
4. Experimental Air
Conditioner Trainer.
5.Absorption
Refrigeration
Demonstration System.
6. Window Air
Used as Laboratory in B.E.
Curriculum
Students Project Work
144
Conditioner Trainer.
4. Heat and Mass Transfer 1.Parallel flow and
counter flow heat
exchanger,Film
2.Condensation
apparatus,
3.Critical heat flux
apparatus
Used as Laboratory in B.E.
Curriculum
Students Project Work
5. Heat Engine 1.Petrol Engine Test Rig,
2.Diesel Engine Test Rig
Used as Laboratory in B.E.
Curriculum
Students Project Work
6. Measurement /Mechatronics 1.Digital trainer kit for
pressure measurement
2.Digital trainer kit for
temperature
measurement
3.Digital trainer kit for
torque
4.measurement
5.Digital trainer kit for
displacement
measurement
6.Digital trainer kit for
strain measurement
7.Digital trainer kit for
Used as Laboratory in B.E.
Curriculum
Students Project Work
145
angle measurement
7. Automobile 1.Gear Box (Working):
2.Cut Section Model
(Working): suitably
mounted on a sturdy Iron
frame
3.Cut Section Model of
Complete front
Suspension with
Longitudinal Torsion bar
Used as Laboratory in B.E.
Curriculum
Students Project Work
SAE Club Activities
8. CAD 1.Software for Finite
Element Analysis
2.Design Workstations
3.Plotter (A1 Size)
4.3D Mouse
Used as Laboratory in B.E &
M.E. Curriculum
Students Project Work
9. FMS 1.CNC Lathe Machine,
2.FMS System
Used as Laboratory in B.E &
M.E. Curriculum
Students Project Work
Table B.6.4
8
146
CRITERION 7 Continuous Improvement 75
7.1. Actions taken based on the results of evaluation of each of the COs, POs & PSOs (30)
Identify the areas of weaknesses in the program based on the analysis of evaluation of COs, POs
& PSOs attainment levels. Measures identified and implemented to improve POs& PSOs
attainment levels for the assessment year including curriculum intervention, pedagogical
initiatives, support system improvements, etc.
Actions to be written as per table in 3.3.2
Examples of analysis and proposed action Sample 1-Course outcomes for a laboratory
course did not measure up, as some of the lab equipment did not have the capability to do the
needful (e.g., single trace oscilloscopes available where dual trace would have been better, or,
non-availability of some important support software etc.). Action taken-Equipment up-gradation
was carried out (with details of up-gradation)
Sample 2-In a course on EM theory student performance has been consistently low with respect
to some COs. Analysis of answer scripts and discussions with the students revealed that this
could be attributed to a weaker course on vector calculus.
Action taken-revision of the course syllabus was carried out (instructor/text book changed too
has been changed, when deemed appropriate).
Sample 3-In a course that had group projects it was determined that the expectations from this
course about PO3 (like: “to meet the specifications with consideration for the public health and
safety, and the cultural, societal, and environmental considerations”) were not realized as there
were no discussions about these aspects while planning and execution of the project. Action
taken-Project planning, monitoring and evaluation included in rubrics related to these aspects.
147
POs Target Level (in %) Attainment Level (in %)
Observation
PO1: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems. PO1 2.4 1.8 Attainment is low in the
following subjects Observations 1. Lateral entry Students are not exposed to basic of engineering mathematics. 2.Solving design procedure problems found to be lengthy
Actions: 1. Extra classes to be conducted to improve fundamentals of engineering mathematics. 2. More problems will be given for practice. PO2: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences. PO2 2.1 1.3 Attainment is low in the
following subjects Observations 1. Basic knowledge of analysis is not well understood. 2. Fundamentals of thermodynamics , theory of machine, machine design and engineering mathematics are not well understood.
Actions: 1.Motivate students to refer standard text books, online resources. 2. More problems will be given for practice. PO3: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations. PO3 2.1 1.28 Attainment is low in the
following subjects Observations 1. Students find it difficult to solve design problems. 2.Face problem to understand design procedure
Actions: 1. Extra classes to be conducted to improve understanding of design procedure. 2. More problems will be given for practice. PO4: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions. PO4 2.1 1.26 Attainment is low in the
following subjects Observations 1. Few lab equipments
148
are not operational. 2.Lack of access of standard journals
Actions: 1.Procurement of new equipment’s. 2. Motivate students to refer standard text books, e-journals, online resources. PO5: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations. PO5 2.1 1.15 Attainment is low in the
following areas Observations 1. Students are less proficient in IT tools.
Actions: 1.Software training will be given. 2. Mechanical design engineering software’s procured.
PO6: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice. PO6 2.1 1.09 Attainment is low in the
following areas Observations 1. Less emphasis is given on industrial training. 2.Few lab equipments are not operational.
Actions: 1. Students will be motivated to go for internships. 2. Lab equipment’s will be procured. PO7: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development. PO7 2.00 0.88 Attainment is low in the
following areas Observations 1. Fundamentals concepts of environmental engineering with respect to society are not considered.
Actions: 1. Awareness about initiatives taken by State and Central Govt. PO8: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice. PO8 2.1 0.82 Attainment is low in the
following areas Observations 1.Students do not take part in seminar, group discussion etc.
Actions: 1. Attending seminars and group discussion is made mandatory. 2. Students will be made aware about the importance of ethics in mechanical engineering. PO9: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
149
PO9 2.1 1.1 Attainment is low in the following areas Observations 1. Lack of interaction amongst the students.
Actions: 1. More group projects will be assigned. PO10: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions. PO10 2.0 0.96 Attainment is low in the
following areas Observations 1. Less proficient in English
Actions: 1. Essay writing competition is organized.
2. Course work will include Presentation on relevant topics.
PO11: Demonstrate knowledge and understanding of the engineering and management principles and
apply these to one’s own work, as a member and leader in a team, to manage projects and in
multidisciplinary environments.
PO11 2.1 1.14 Attainment is low in the
following areas
Observations
1. Students give less
importance to industrial
training.
2. Students are less
focused in report
writing.
Actions: 1.Students will be given term projects.
PO12: Recognize the need for, and have the preparation and ability to engage in independent and life-
long learning in the broadest context of technological change.
PO12 2.1 1.35 Attainment is low in the
following areas
Observations
1. Students are less
motivated to work on
their own.
150
Actions: 1. Group discussions are organized.
2. Term projects will be given on relevant topics.
PSO1: Extend and implement new thoughts on product design and development with the aids of
modern tools while ensuring best manufacturing practice.
PSO 1 2.0 0.75 Attainment is low in the
following areas
Observations
1. Students are weak in
modern manufacturing
practices.
2. Less exposer to real
life problems
Actions: 1. Case study will be assigned to the students.
3. More expert lectures from industry people will be organized.
PSO2:An ability to become successful entrepreneur with necessary knowledge of startup and industrial
management which contributes in nation building.
PSO 2 2.0 1.16 Attainment is low in the
following areas
Observations
1. Students are weak in
basic concepts of
mechanical
engineering.
2. Less exposer to real
life problems
Actions: 1. Case study will be assigned to the students.
2.More expert lectures from industry people will be organized.
Table B.7.1
151
7.2. Academic Audit and actions taken thereof during the period of Assessment (15)
(Academic Audit system/process and its implementation in relation to Continuous Improvement)
The process of Academic Auditing intends to monitor and enhance the quality of technical
education through proper guidelines for both teaching faculty and students, so as to ensure
qualified engineers/researchers passing out from Engineering Institutions.
OBJECTIVES OF ACADEMIC AUDITING:
(i) To ensure academic accountability.
(ii) To define quality of each component of the functionalities and to ensure quality of technical
education throughout the system.
(iii) To safeguard functionalities of technical education.
(iv) To define effectiveness of teaching – learning process and to devise methodology to confirm
maximum output from faculty members as well as students.
The Performa of academic audit are as follows
157
Action taken by the faculty members:
• Faculty members incorporate changes suggested by the audit committee, if any gaps are
found, to ensure quality deliverables.
• Faculty members have to match the pace of their deliverables as per the students’
requirements as well as they have to schedule the lecture plans in such a way that the
syllabus is completed on time. To achieve this they can arrange extra lectures and cope-
up the syllabus.
• Regular analysis of the results of internal assessment examination of all subjects is done
and concerned faculties are guided to take necessary actions. Remedial classes are
scheduled in reference to academic progress of the student.
• Faculty members attend FDP as required for the overall development of teaching skills in
terms of communication, methods and technical.
• The academic observation is carried out considering two criteria – feedback from
students (requested to the authorities) and randomized observation.
• Technical FDP, expert lectures, seminars etc. are being arranged by the individual
departments at least once in a semester.
7.3. Improvement in Placement, Higher Studies and Entrepreneurship (10)
Assessment is based on improvement in:
Placement: number, quality placement, core industry, pay packages etc.
Higher studies: performance in GATE, GRE, GMAT, CAT etc., and admissions in premier
institutions
Entrepreneurs
Item 2017-18 2016-17 2015-16
Total No. of Final Year Students (N) 75 72 72
No. of students placed in companies or Government Sector (x) 12 06 16
No. of students admitted to higher studies with valid qualifying scores 25 11 23
158
(GATE or equivalent State or National Level Tests, GRE, GMAT etc.) (y)
No. of students turned entrepreneur in engineering/technology (z) - - -
x + y + z = 37 17 39
Placement Index : (x + y + z )/N 0.493 0.236 0.54
Average placement= (P1 + P2 + P3)/3 0.423
Assessment Points = 30 × average placement 12.69
Table B.7.3
159
7.4. Improvement in the quality of students admitted to the program (20)
Assessment is based on improvement in terms of ranks/score in qualifying state level/national
level entrances tests, percentage marks in Physics, Chemistry and Mathematics in 12th Standard
and percentage marks of the lateral entry students.
Item 2017-18 2016-17 2015-16
No. of Students
admitted 62 63 62
National Level Entrance
Opening Score/Rank
Examination (Name of the 144/54990 126/56783
132/3950
5
Entrance Examination)
Closing Score/Rank
2/1024914 17.74/1103796
8.0/117622
6
State/Institute/Level Entrance
No. of Students
admitted - - -
Examination/Others
Opening Score/Rank
- - -
(Name of the Entrance
Closing Score/Rank
Examination) - - -
No. of Students
admitted 10 11 12
Name of the Entrance
Examination for Lateral Entry or Opening Score/Rank 78%/180 82.7%/47 78.52%/134
160
lateral entry details
Closing Score/Rank
63.5% 62.1%/2237 62.5%/1613
Average CBSE/Any other Board Result of admitted 77.67 79.83 79.62
students (Physics, Chemistry & Mathematics)
Table B.7.4.
161
CRITERION 8 First Year Academics 50 8.1. First Year Student-Faculty Ratio (FYSFR) (5)
Data for first year courses to calculate the FYSFR:
Year Number of students
(approved intake strength)
Number of faculty members
(considering fractional load)
FYSFR *Assessment = (5 ×20)/ FYSFR
(Limited to Max. 5)
CAY 540 83 6.51 15.36 CAYm1 540 73 7.4 13.51 CAYm2 540 62 8.71 11.48 Average 540 72.67 7.54 13.45
Table B 8.1.
8.2. Qualification of Faculty Teaching First Year Common Courses (5)
Assessment of qualification = (5x +3y)/RF, x= Number of Regular Faculty with Ph.D., y = Number of Regular Faculty with Post-graduate qualification RF= Number of faculty members required as per SFR of 20:1, Faculty definition as defined in 5.1
Year X Y RF Assessment of faculty qualification (5x + 3y)/RF
CAY 39 44 27 12.11 CAYm1 34 39 27 10.63 CAYm2 33 29 27 9.33
Average Assessment 10.69 Table B 8.2
8.3. First Year Academic Performance (10)
Academic Performance = ((Mean of 1st Year Grade Point Average of all successful Students on a 10 point scale) or (Mean of the percentage of marks in First Year of all successful students/10)) x (number of successful students/number of students appeared in the examination)
Successful students are those who are permitted to proceed to the second year.
Branch 2015-2016 Mean C
=(A+B) /2
Mean Z
=(X+Y) /(P+Q)
Academic Performance
= C *Z Dec 2015 June 2016 Promoted
to second year
Appeared Students
P
Successful Students
X
Mean A
Appeared Students
Q
Successful Students
Y
Mean B
BME 35 22 7.01 33 19 7.46 26 7.23 0.60 4.36 CE 64 61 7.20 62 61 7.16 62 7.18 0.97 6.95 CSE 61 50 9.25 58 52 7.33 54 8.29 0.86 7.11 EE 65 54 7.421 60 51 7.995 56 7.708 0.84 6.47 ECE 63 51 6.08 57 56 6.49 57 6.28 0.89 5.60 EI 63 58 7.76 60 50 8.73 60 8.245 0.88 7.24
IT 63 51 7.53 61 49 7.05 60 7.29 0.81 5.88
ME 63 53 7.94 60 44 7.67 59 7.80 0.79 6.15
162
PCE 61 56 7.25 60 54 7.35 60 7.3 0.91 6.64
Total 59.78 50.67 7.49 56.78 48.44 7.47 7.48 0.84 6.27
Branch 2016-2017 Mean C
=(A+B) /2
Mean Z
=(X+Y) /(P+Q)
Academic Performance
= C * Z Dec 2016 June 2017 Promoted
to second year
Appeared Students
Successful Students
X
Mean A
Appeared Students
Successful Students
Y
Mean B
BME 36 30 6.89 34 20 7.35 25 7.12 0.71 5.09 CE 60 58 7.20 60 41 7.52 60 7.36 0.83 6.07 CSE 63 55 8.18 73 51 7.65 62 7.91 0.78 6.17 EE 62 56 7.351 61 50 7.405 50 7.378 0.86 6.36 ECE 61 57 7.06 60 48 5.81 60 6.435 0.87 5.58 EI 56 52 7.2 56 38 9.7 55 8.45 0.80 6.79
IT 61 58 7.38 61 43 7.4 60 7.39 0.83 6.12
ME 61 53 7.36 64 44 7.45 60 7.405 0.78 5.75 PCE 49 41 7.24 49 30 7.41 46 7.325 0.72 5.31 Total 56.56 51.11 7.32 57.56 40.56 7.52 7.42 0.80 5.91
Branch 2017-2018 Mean C
=X /Y
Academic Performance
= C * A
Dec 2017 Appeared Students
Y
Successful Students
X
Mean
BME 22 14 7.03 0.64 4.47
CE 62 45 7.08 0.73 5.14
CSE/IT 120 95 7.00 0.79 5.54
EE 60 47 7.222 0.78 5.66
ECE 56 40 5.11 0.71 3.65
EI 46 36 8.7 0.78 6.81
ME 61 49 7.35 0.80 5.90
PCE 28 15 7.12 0.54 3.81
Total 53.67 39.56 7.08 0.72 5.11
163
8.4. Attainment of Course Outcomes of first year courses (10)
8.4.1. Describe the assessment processes used to gather the data upon which the evaluation of Course Outcomes of first year is done (5)
(Examples of data collection processes may include, but are not limited to, specific exam questions, laboratory tests, internally developed assessment exams, oral exams assignments, presentations, tutorial sheets etc.)
Description of Course File
Name of the
Department
Course
Code
Course Title Teaching Faculty Semester
Applied Maths BT-1715 Engineering Maths I Dr. Mudit Bansal I
BT-1725 Engineering Maths II Dr. Rajendra Pathak II
Applied Physics BE-1721 Engineering Physics Dr. Sachin Mahajan I & II
Applied Chemistry BE-1711 Engineering Chemistry Dr. Manoj Datar I & II
BE-1724 Energy Environment Ecology
& Society
Dr. R. N. Shukla I & II
Dr. Pradeep Sharma I & II
Civil Engineering BE-1722 Basic Civil Engineering &
Engineering Mechanics
Tanu Chaturvedi I
Suraj Jain II
Computer Science
Engineering
BE-1726 Computer Programming Prof. Shaila Chug II
Electrical Engineering BE-1712 Basic Electrical & Electronics
Engineering
Bharat Singh
Choudhary
I
Anusha S lahoti II
Mechanical
Engineering
BE-1723 Basic Mechanical Engineering Prachi Kanherkar I & II
BE-1716 Workshop Practice R.M. Saxena I & II
BE-1713 Engineering Graphics Kamlesh Sharma I & II
Master of Computer
Application
BE-1726 Computer Programming Narendra Gupta II
Sushil Verma II
Dr. Sachin Kamley II
Sourabh Sharma II
Humanities BE-1714 Communication Skills Dr. Amitosh Singh I & II
BE-1727 Rural Outreach and
Entrepreneurship
Dr. Amitosh Singh I & II
164
8.4.2. Record the attainment of Course Outcomes of all first year courses (5)
Program shall have set attainment levels for all first year courses.
(The attainment levels shall be set considering average performance levels in the institution level examination or any higher value set as target for the assessment years. Attainment level is to be measured in terms of student performance in internal assessments with respect the COs of a subject plus the performance in the institution level examination)
Session 2017-2018
Name of the
Department
Course
Code
Course Title No.
of
COs
Attainment
CO1 CO2 CO3 CO4 CO5 CO6 CO7
Applied
Chemistry
BE-
1711
Engineering
Chemistry 4 41.26 44.51 49.02 40.86 - - -
Electrical
Engineering
BE-
1712
Basic Electrical
& Electronics
Engineering
7 56.20 56.20 51.31 51.31 25.18 52.95 59.07
Mechanical
Engineering
BE-
1713
Engineering
Graphics 5 51.89 42.89 30.28 33.10 47.65 - -
Humanities BE-
1714 Communication
Skills 5 54.31 64.25 61.29 56.72 49.90 - -
Applied Maths BT-
1715
Engineering
Maths I 3 56.83 61.11 61.87 - - - -
Applied
Physics
BE-
1721
Engineering
Physics 5 8.14 45.89 58.99 54.29 65.88 - -
Civil
Engineering
BE-
1722
Basic Civil
Engineering &
Engineering
Mechanics
5 56.20 51.31 25.18 52.95 59.07 - -
Mechanical
Engineering
BE-
1723
Basic
Mechanical
Engineering
5 45.95 44.35 48.05 57.71 36.64 - -
Petrochemical
Engineering
BE-
1724
Energy
Environment
Ecology &
Society
5 52.44 50.31 48.96 38.42 36.74 - -
165
8.5. Attainment of Program Outcomes from first year courses (20)
8.5.1. Indicate results of evaluation of each relevant PO and/or PSO if applicable (10)
The relevant program outcomes that are to be addressed at first year need to be identified by the institution
Program Outcome attainment levels shall be set for all relevant POs and/or PSOs through first year courses.
(Describe the assessment processes that demonstrate the degree to which the Program Outcomes and Program Specific Outcomes are attained through first year courses and document the attainment levels. Also include information on assessment processes used to gather the data upon which the evaluation of each Program Outcome is based indicating the frequency with which these processes are carried out)
PO/PSO Attainment: Mention first year courses
Course Course Title PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 BE-1711 Engineering
Chemistry 43.38 43.38 43.38 43.38 43.38 43.38 43.38 0.00 43.38 0.00 0.00 43.38
BE-1712 Basic Electrical
& Electronics
Engineering 43.61 43.61 0 43.61 43.61 43.61 43.61 43.61 43.61 0 43.61 43.61
BE-1713 Engineering
Graphics 41.16 41.16 41.16 39.54 47.65 0 0 0 0 0 41.16 41.16
BE-1714 Communication
Skills 0.00 0.00 0.00 0.00 49.90 54.31 54.31 49.90 56.72 57.44 56.72 57.08
BE-1715 Engineering
Maths I 61.26 61.26 61.26 61.26 61.26 61.26 61.26 0.00 0.00 0.00 61.26 61.26
BE-1721 Engineering
Physics 46.64 46.64 46.64 46.64 42.77 46.64 46.64 0 0 0 0 46.64
BE-1722 Basic Civil
Engineering &
Engineering
Mechanics
48.94 47.94 47.94 0.00 0.00 0.00 0.00 0.00 59.07 59.07 0.00 56.01
BE-1723 Basic
Mechanical
Engineering 46.54 49.01 43.75 43.01 0.00 43.01 46.69 50.04 0.00 0.00 0.00 46.54
BE-1724 Energy
Environment
Ecology &
Society
45.37 45.37 0.00 45.37 45.37 45.37 45.37 45.37 45.37 0.00 45.37 45.37
166
8.5.2. Actions taken based on the results of evaluation of relevant POs and PSOs (10) (The attainment levels by direct (student performance) are to be presented through Program level Course-PO matrix as indicated) PO Attainment Levels and Actions for improvement – CAY only – Mention for relevant Pos
POs Target Level
Attainment Level
Observations
PO1: Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization for the solution of complex engineering problems. PO1 80 47.11 Attainment is low in engineering graphics & basic electrical and
electronics engineering. Observations: 1. Attainment level still it is 41.16 we need to improve. 2. Students find it difficult visualization of projection.
Action 1: Additional classes to be conducted to introduce projection concepts. Action 2: More problems will be given for practice. PO2: Problem analysis: Identify, formulate, research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences. PO2 68 47.30 Attainment is low in engineering graphics & basic electrical and
electronics engineering. Observations: 1. Attainment level still it is 41.16 we need to improve. 2. Students find it difficult visualization of projection.
Action 1: Additional classes to be conducted to introduce projection concepts. Action 2: More problems will be given for practice. PO3: Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for public health and safety, and cultural, societal, and environmental considerations. PO3 56.67 47.36 Attainment is low in engineering graphics & basic electrical and
electronics engineering. Observations: 1. Attainment level still it is 41.16 we need to improve. 2. Students find it difficult visualization of projection.
Action 1: Additional classes to be conducted to introduce projection concepts. Action 2: More problems will be given for practice. PO4: . Conduct investigations of complex problems: The problems: • that cannot be solved by straightforward application of knowledge, theories and techniques applicable to the engineering discipline. • That may not have a unique solution. For example, a design problem can be solved in many ways and lead to multiple possible solutions. • That requires consideration of appropriate constraints/requirements not explicitly given in the problem statement. (Like: cost, power requirement, durability, product life, etc.). • Which need to be defined (modeled) within appropriate mathematical framework. • That often require use of modern computational concepts and tools.# PO4 59.12 46.12 Attainment level is low in basic electrical and electronics
engineering & basic mechanical engineering. Observation: 1. Attainment level still it is 45.23 we need to improve.
Action 1: Additional classes to be conducted. Action 2: More problems to be taught in tutorial classes. PO5: Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools, including prediction and modelling to complex engineering activities, with an understanding of the limitations. PO5 38.10 47.71 Attainment level is achieved. Action 1: Possibilities will be find to explore the target level. PO6: The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the
167
professional engineering practice. PO6 50.29 48.23 Attainment level is almost achieved. Action 1: Possibilities will be find to explore the target level. PO7: Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts and demonstrate the knowledge of, and need for sustainable development. PO7 51.05 48.75 Attainment level is almost achieved. Action 1: Possibilities will be find to explore the target level. PO8: . Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice. PO8 53.33 47.23 The students are doing better in improving the overall expertise
in the field of engineering but due to lack of communication skills and other ethical knowledge. Observation: some are lagging in real life knowledge
Action 1: Carrier readiness program & corporate lectures to be arranged. Action 2: Motivational talks are to be arranged. PO9: Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings. PO9 58.67 49.63 Attainment level is not far below the target level. The students
are not able to work as individual as well as in team. Action 1: Institute will initiate which provide a platform to work in individual as well as group. Action 2: To help the students to groom the skills like leadership, efficient team member etc.
mentorship to be conducted. PO10: Communication: Communicate effectively on complex engineering activities with the engineering community and with t h e society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions. PO10 57.73 58.26 Attainment level is achieved Action 1: Possibilities will be find to explore the target level. PO11: Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments PO11 42.67 49.62 Attainment level is achieved. Action 1: Possibilities will be find to explore the target level. PO12: Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change PO12 47.11 49.01 Attainment level is achieved. Action 1: Possibilities will be find to explore the target level.
168
CRITERION-9 Student Support Systems
9. STUDENT SUPPORT SYSTEMS (50)
9.1 Mentoring system to help at individual level (5 )
Type of mentoring: Professional guidance/ career advancement/course work specific/ laboratory specific/ all-round development. Number of faculty mentors: Number of students per mentor: Frequency of meeting: (The institution may report the details of the mentoring system that has been developed for the students for various purposes and also state the efficacy of such system)
• Mentoring System : Yes
• Type of Mentoring : Tutor Guardian Scheme
• Number of faculty mentors : 123
• Number of students per mentor : 20
• Frequency of meeting : Fortnightly
Details of the mentoring system
A faculty mentor is assigned to a group of 20 students to deal with their problems the mentor maintains record of students. The mentor observes the overall growth of student and provides counseling whenever required. The mentor also makes sure to maintain a regular parent-teacher dialogue.
Efficiency of such system
The system develops an interaction amongst the students, teachers and parents. The system helps to improve the academic performance of the students. The system provides scope for healthy, positive and stress free state of mind. Teachers are also becoming more responsive to the learner needs day by day which is being reflected in the diary maintained by the teacher. The mentors meet to the students periodically and monitor their performance and their activities. Guidance regarding the lagging issues is provided. Occasionally tutor meeting with the parents is conducted based on the requirement.
Professional Guidance:
The department is well equipped with knowledgeable Human resources in the form of members of faculty who by keeping themselves of development, offer guidance to the prospective professionals in addition to the classroom teaching. The Industry- institute Partnership cell and Entrepreneurship development cell have been putting efforts in this direction.
Career advancement:
The Training and Placement cell has been active not only in arranging campus recruitment drives, but also offering awareness and training for the students Course work. Members of faculty handling different courses interact with students in clearing all their Concept-oriented and test based mechanics of the respective courses. The teachers after first of formative evaluation guide the students as far as student- specific gray areas are concerned.
Lab-specific:
169
Each of the lab sessions are handled by 2 Teachers in order to have special care for the students(batch size 30) while experiments are being handled. A demonstrative presentation is given by the teacher concerned before every experiment. The Laboratory records are evaluated after the experiment is held. In other words, there is active involvement of the faculty members at Pre-experiment stage, at the time of experiment and after the experiment.
Total Development:
As stated above, the college puts forward efforts to realize total development of the student. In addition to academics, literary, cultural and sports activities are conducted which offer leadership qualities, decision making abilities, team spirit, precision, analytical capabilities, socio- psychological awareness etc. which make an individual a intellectually mature being.
9.2. Feedback analysis and reward/corrective measur es taken, if any (10)
Feedback collected for all courses: YES/NO; Specify the feedback collection process; Average Percentage of students who participate; Specify the feedback analysis process; Basis of reward/ corrective measures, if any; Indices used for measuring quality of teaching & learning and summary of the index values for all courses/teachers; Number of corrective actions taken. Feedback collected for all courses (Yes/No): Yes
Specify the feedback collection process:
A standard feedback questionnaire is collected from the students every semester course wise. At the end of semester, department conduct end course survey in order to take the feedback about the facilitators as well about the effectiveness of course. Apart from this exit survey is also conducted for passing out student
Number of Feedback Items : 20 Frequency of feedback collection : Once in a semester. Feedback collection Hard-copy : Yes. Average percentage of students who participates : above 80%
Feedback analysis Process:
1. The feedback analysis is done manually
2. Collected feedback is scrutinized at department level.
3. The feedback is quantified
4. All the parameters mentioned in the feedback form is analyzed.
5. Ability of teaching with respect to each item and comprehensive ability of the teachers is analyzed
6. All the comments written by the students in the feedback forms is communicated to the respective faculty members along with their feedback levels to know their strengths and weaknesses and to enhance their teaching skills.
Basis of reward/corrective measure :
1. Faculty members who get average feedback identified and provided with induction
program and faculty development program.
170
2. Also the faculty members who get bet ter feedback appreciated by management on Independence day & Republic day
9.3. Feedback on facilities (5)
Assessment is based on student feedback collection, analysis and corrective action taken.
Assessment is based on student feedback collection, analysis and corrective action taken. Assessment is based on student feedback collection, analysis and corrective action taken
1. Student’s feedback on facilities such as class room ambiance, furniture, is satisfactory. 2. Student’s feedback on facilities such as library, no of books to be increased. We have
increase purchase of books for central library. 3. Student’s feedback on facilities such as speed of internet to be improved. We have
increased the band width.
9.4. Self-Learning (5)
(The institution needs to specify the facilities, materials and scope for self-learning/ learning beyond syllabus, Webinars, Podcast, MOOCs etc. and evaluate their effectiveness)
• The curriculum offers courses like, minor project, major projects where the topics are self-selected or based on guide suggestion. The component of self-learning is evaluated in these courses.
• Seminars, conference, workshop & guest lecturers were organized.
• In every lecture 5-10 minutes discussion on new technology and its application in real life that is beyond the syllabus is discussed for improvement & innovation.
• Every student has to submit a home assignment in every course which has been evaluated for
10 marks. Some of these tasks are beyond syllabus to encourage out- standing students to develop their self-learning capabilities. • Department library with sufficient number of volumes on core and
application areas, technology awareness journals are opened during college working hours. IPR Cell, Innovation Club, Centre of Excellence has been established in Institute Swayam & Swayam Prabha courses are also available. T.V. Set at prominent locations has been installed to watch the online lecture.
• E-notes has been prepared by the department faculty and maintained by the department faculty for the development of students for all subjects in our department.
• Apart from the above, the college actively promotes self-learning through the following resources procured through NPTEL, QEEE and other Audio-Video content:
9.5. Career Guidance, Training, Placement (10)
(The institution may specify the facility, its management and its effectiveness for career guidance including counseling for higher studies, campus placement support, industry interaction for training/internship/placement, etc.) The Career guidance cell and Training & Placement department in coordination with Student section Counselors keeps students abreast with the opportunities of higher studies & placement on regular basis. The team for Career counseling comprises of departmental Representatives. Functions of the Departmental Representative
1. To arrange Seminars / Workshops on Career opportunities
171
2. To conduct mock tests for competitive examinations.
3. To arrange interactive sessions between alumni and students.
4. To procure study material and make it available in the Library/Intranet.
5. Display of Posters, Notices relating to Opportunities
Details of activities organized by placement cell y ear 2017-18 Sr Date & Time Activity Faculty Co -ordinator Venue
1. 09th July 2017 1 day workshop on tips to solve Aptitude & LR Problems
Mr. Amitesh Amar, IITian having 15yrs exp.
Smart Class Room
2. 26th -28th July 2017
Access to Employability by Barclay & SSRDP
Mr. VivekTripathi, Mr. ManojPatil
Smart Class Room
3. 1st -14th Aug 2017
Personality Development Course Dr.Amitosh Singh Smart Class Room
4. 1st -30th Aug 2017
Daily Aptitude Test on Moodle Mr. Nirmal Gaud IT Lab
5. 10th Aug 2017 Preparing for IT industry Mr. AsadKadri, Director Capgemini
Auditorium
6. 1st Sep. 2017 Mock Aptitude test T&P Cell IT Lab & CSE Lab
7. 4th Sep. 2017 Pseudo Coding test & discussion on answers
Prof. Sandeep Raghuwanshi&Dr.G.Chetty
IT Lab & CSE Lab
8. 4th Sep. 2017 Java Coding test & identifying common mistakes (for IT & CSE )
Prof. Sandeep Raghuwanshi
IT Lab & CSE Lab
9. 5th Sep. 2017
Essay Writing (IT & CSE) (How to prevent common mistakes in writing essay)
Dr.Amitosh Singh & Dr.Dharmesh Jain
Smart Class Room
10. 6th Sep. 2017 Mock Interview Session Respective TG Department
11. 7th Sep. 2017 Motivation lecture TedEx Speaker – Mr.PrashantMotwani
Smart Classroom
12. 7th Sep. 2017 Practice on Aptitude test & Pseudo Coding test
T&P Cell IT Lab
13. 8th & 9th Sep. 2017
Mock recruitment process (resembling recruitment process of Capgemini)
T&P Cell IT & CSE Lab, T&P office
14. 6th Dec 2017 Developing English Communication Skills
Mr. AnandJambolkar, Maatra Associate
Smart Classroom
15. 16th Feb 2018 Research after Graduation Mr. Mayank Tiwari, DRDO
Smartclass
16. 16th Feb 2018 How to score 100%tile in CAT Mr. V. K. Giri, 100%tile in CAT in 2015
Smartclass
172
17. 21st Feb 2018
Trend in IT Industry & Career Counselling
Mr. Ankit Jain, TCS Smart Class Room
Details of Placement year 2017 -18
Sr. No.
Date Company / Organisation No. of Selections
1 01.08.2017 Researchinn Investment Advisor 15
2 09.09.2017 Herbingar 1 3 13.09.2017 Capgemini 17 4 16.09.2017 Smartprix 0 5 07.10.2017 CapitalAim Financial Advisory Private Limited 1 6 28.10.2017 Xoriant Solutions Pvt. Ltd. 0 7 02.11.2017 TATA AIG General Insurance Company 1 8 11.11.2017 TCS Mumbai 28 9 24.11.2017 Synopsys 0
10 25.11.2017 Dafodil 1 11 27.11.2017 Start Login Bhopal 5 12 13.12.2017 BYJU 3 13 18.12.2017 Everest India Pvt Ltd 1 14 11.01.2018 BORL 3 15 15.02.2018 Diaspark Infotech 2 16 24.02.2018 Soctronics Pvt. Ltd. 1 17 21.03.2018 Triveni Turbines 0
18 06.04.2018 YKK 1 19 06.04.2018 Calsoft 1 20 17.04.2018 e-clinical 0 21 08.05.2018 Motif 0
22 08.05.2018 Etech 0
23 08.05.2018 SPM Auto 1 24 08.05.2018 Nainko Exim 0
25 23.05.2018 Ways2star Financial Services 43 26 25.05.2018 Rightful Lab 0
27 25.05.2018 Trigent Software 0
28 26.05.2018 Artech 2 29 01.06.2018 Suzlon 1 30 07.06.2018 Orient Paper Mill 4 31 11.06.2018 Crompton Greaves Result Awaited
Total Selection 132
Placement Details of 3 years
Year No of Companies Visited in closed/pool)
No of students placed (Open campus drive)
No of students placed (Open campus drive)
No of students placed Total Placement
Engineering
Non Engineering
Engineering Non Engineering
Engineering
Non Engineering
173
2017-18 31 102 23 7 0 109 23 132
2016-17 32 70 5 28 0 98 5 103
2015-16 19 182 22 0 0 182 22 204
2014-15 33 169 13 20 18 189 33 222
9.6. Entrepreneurship Cell and incubation facilitie s (5)
(The institution may describe the facility, its management and its effectiveness in encouraging entrepreneurship and incubation) (Success stories for each of the assessment years are to be mentioned) In our institute entrepreneurship development cell is organizing workshop on entrepreneurship. Through entrepreneurship development cell interaction with the entrepreneur is organized. Through entrepreneurship development cell competitions are arranged for new innovative business ideas. The entrepreneurship Development Cell has been organizing workshops and seminar for the benefit of students. The EDC Cell invites speaker, Entrepreneurs to share their experiences and also invites professionals from Banks, Federation of Commerce and Industry to motivate and educate students on Entrepreneurship.
Vision and Ideology of the E-Cell Vision To stimulate, support and sustain all initiatives and endeavors of students, which will lead to generation of entrepreneurship based on Engineering and Technology
Ideology
• To motivate and inspire students to take up the challenge of entrepreneurship • To equip them with necessary skills and provide all possible assistance • To promote creative thinking and an entrepreneurial mindset among the students • To promote innovations and help convert them into market accepted Products
Activities undergoing in E- Cell:
The E-cell Organizes lectures, workshops and seminars by renowned personalities from different domains of expertise, competitions of various kinds etc. round-the-year in order to create awareness and to sharpen business acumen of students and aspiring entrepreneurs. Mentor students / new faculties who have business ideas by bringing expertise to their doorsteps. The E-cell is network hub for students aspiring to be entrepreneurs and also play a role in team building as a part of its mentorship. Mentoring the students at an early stage by giving proper direction and necessary exposure would be crucial in converting technical ideas/projects into viable business plans It is an interface between the entrepreneurial activity in institute and the outside world, a consolidation of logistic and knowledge resources necessary to make a business plan and set up an enterprise. Form permanent associations with professional bodies and organizations, Universities, corporations, media etc. to facilitate exchange of ideas and to promote entrepreneurial ventures. Knowledge partnerships will play an important role in engaging good expertise for the benefit of entrepreneurial activity at institute. Associations with venture capital firms and seed funds would be crucial in the setup of new ventures. To achieve the above objectives the E-Cell will focus on some initiatives to foster the spirit of entrepreneurship in the following ways. Innovation club:
174
In It is aimed at nurturing innovation at the grassroots level, it is an organized group of selected students getting together to discuss each other’s ideas. This discussion is now being done on a wiki page. The discussion helps the students stay motivated to work on their idea as well as helps build their idea into something feasible. In-house Events/competition:
To motivate student towards entrepreneurship, e-Cell will regularly conduct in-house competition of various events such as business idea competition, case study competition, Business quiz, brand watch, innovation approach, best out- of- waste competition, innovation approaches in IT industry, new ventures lunched and their idea and profile, story writing of successful entrepreneur, Expose the youth to the latest innovations and entrepreneurial success stories etc. start up cell: To connect the students with the start-ups through which start-ups get an opportunity to interact with the students and pitch their ideas to the panel of Venture Capitalists and the students get hired for summer internship.
For Smooth functioning of E-cell and carry out strategic planning with aligning our vision and mission and promote of E-cell, we should have team of following: a. Faculty Coordinator :
There is a faculty coordinator whose role will is to see day to day affair of E-cell and organize the different events and competition. He is responsible to promote E-Cell and work under the guidance of Director. He is responsible to work according to vision and mission of the cell. b. Student Team:
There is a student Coordinator, and Secretary cum treasurer from the student community, who will work under the guidance of committee member. They are responsible for monitoring E-cell activities and initiatives. They remain in touch various students of E-cell and other Entrepreneurship network establish in different institute. 9.7. Co-curricular and Extra-curricular Activities (10)
(The institution may specify the co-curricular and extra-curricular activities)(Quantify activities such as NCC, NSS etc.) For the overall development of the students, the institute organize Techfest, Samrat Utsav,State level inter engineering college cricket tournament every year in this we organize different events like, cultural. Sports, painting, competitions through various committees. A student’s newsletter and magazine is also published to exhibit their talent. Co-curricular Activ ities
Engineers Day, Mathematics Day, Rashtriya Yuva Divas, International Yoga day ,Teachers Day, Women Day, World- Water Day, Earth Day, World Book Day, Press Freedom Day,world Science Day, Quiz Competition Tech Fest (SATYARTH)
Seminars, Workshop, Conference & Guest Lecture (at least once in a session in each department) Institute is registered for NSS
175
NSS, & University Youth Festival for sports and cultural activities. Yearly excursion cum Industrial tours is conducted for students wherein students are taken to various places of interest. Extra-curricular activities are:
Activity Detail of activiti es
Annual Festival (SAMRAT UTSAV)
Extempore, Mehndi Competitions, , Poster Competition, Classical /Fusion Dances, Quiz, Poetry, Debate, Essay, Painting, Sketching, Photography, Robo competition, Dance ( Group &Solo), Singing (Group &Solo), skit competition, Nukkad Natak, Rangoli etc. Sports Competition (kabbadi, Volley Ball ,Hand Ball, Badminton ,Cricket, Foot Ball, Kho-Kho, Chess, carom, Table Tennis, Lawn Tennis, & Athletics, Annual Festival (SAMRAT UTSAV)
Social activities Blood Donation Camps, Rallies on social issues, and Tree plantation.
Other Independence Day, Republic Day, Ganesh Utsav, Rose Show, Bhajan Sandhya, Vishwakarma jayanti,
Inter Engineering College Competitions
State level Inter Engineering college cricket tournament.
Foundation Day Alumni meet
Games and Sports facilities, and qualified sports instructors (5)
Outdoor –
1. Kabaddi 2. Volley Ball 3. Hand ball 4. Badminton 5. Cricket 6. Football 7. Kho-Kho
Indoor –
1. Chess 2. Carom 3. Table Tennis 4. Gymnasium
176
CRITERION 10 Governance, Institutional Support and Financial Res ources 120 10.1. Organization, Governance and Transparency ( 55) 10.1.1. State the Vision and Mission of the Institu te (5)
Vision : To contribute towards service and development of the mankind through quality education and research, in the area of science and technology.
Mission : To create quality manpower equipped with technical skills ,social values, leadership, creativity and renovation for the benefit and betterment of mankind and sustainable development of the nation.
10.1.2. Availability of the Institutional Strategic Plan and its Effective Implementation
and Monitoring (25)
Institutional strategic plan has been made by performing deep analysis of Strength, weakness, Opportunity and Threat of the institute. Several meetings and interactions with Management, Director, Dean Academic, Dean Research, Registrar, all HoDs, Faculties, Supporting staff, Students, Parents and Alumni were held for the same. Following key points about institute were discussed to carry out the analysis-
• Infrastructure/Laboratory/Equipment/Workshop
• Research/Consultancy
• Placement Cell
• Industry interaction
• Workshop/Training Programme for Faculty/Staff/Students
• Mentorship Programme for the students
• Active & Innovative Learning Process
• Outcome based Curriculum
• Admission policies/Fee Structure
• TEQIP-III
• MoU with Reputed Institutes/Industries
• E-Learning/Library
• Skill Development Programme
• Unnat Bharat Abhiyan
• Moodle
• Sports/clubs/Activities/social Service
• Awards/Scholarships
• IT Infrastructure/ digital technology
• Security
• Woman grievance & redressal
177
After several brainstorming session by keeping above key points in mind, following
strategy plans and its implementation & monitoring have been set up that transform
S.A.T.I., Vidisha into globally recognize technical institute-
Sr. No Strategy Plan
Implementation Monitoring
1 To improve teaching learning environment
• Set up of new Smart Class Rooms
• Adoption of Moodle • Use Moocs/NPTEL for e learning • Arrange Expert Talks • Interaction with industry person • Provide Career Guidance to
students • Use service of Adjunct faculty • Successful implementation of
OBE
Director of the institute, Dean academic and HODs visit the class rooms, labs daily in order to make healthy academic environment and make sure successful implementation of outcome based education in the campus. In additions to the regular classes, expert talks on emerging areas also arrange weekly in the institute. Daily attendance, assignment, quizzes are uploaded on Moodle and noticed by director and HODs.
2 To improve laboratory/ library
• To setup new labs on emerging areas.
• To setup modern Lab for research
• Rich library resources such as reputed journals/ new books
Meeting of HODs , Dean academic , Dean research arrange once in each semester for setting up new labs or purchasing of new equipment. In-charge library regularly ask for new books/e-journal from faculties & students and arrange them in the library.
3 To enhance research culture
Funds/Workshop/Training have been arranged for the faculty/students in order to attract funded research project/consultancy
Every month Dean research arrange the meeting with director of the institute and encourage the faculty to create the research culture in the institute, arrange the workshop/training/expert talk on emerging areas
4 To enhance interaction with reputed institute
MoU with reputed institute/company has been set up to joint research & exchange of human resources
MoU with reputed institute / industry is decided in the meeting of BOG
5 To provide mentorship to students
Proper assistance is provided by TGs to the needy students in all areas such as study, fiancé, career etc
Meeting between TGs & students takes place daily and resolve various problems of students
6 To start new PG programs in emerging areas
For enhancement of research culture in the institute
Director of the institute arrange the meeting every month with Dean Academic, Dean Research and HODs and try to find the emerging areas for witch new courses can be
178
launched 7 To obtain
accreditation for various courses
Applied for NBA accreditation and prepared for that
Coordinator of NBA arrange the meeting once in a week of Head of the departments to be accredited with director and assess the status of preparation of accreditation
8 To improve quality of campus
Various steps have been taken to provide world class infrastructure in the institute such as digital technology used in every section/ high speed wi-fi/ lush green campus/ smart class rooms/ central library/ computer centre/ higenic hostels/ playgrounds/ indoor stadium/ auditorium /security/electrical maintenance
In-charge of various section such as building section, hostel warden, computer maintenance , security officer, electrical maintenance etc continuously supervise the concern section and keep the campus up-to-date for easy and better life
9 To improve students placement
Communication has been setup with various MNCs such as TCS, Infosys, IBM, etc. for campus drives at the institute
Placement team continuously interact with HR of various MNCs for campus recruitment, arrange various career oriented programme at institute.
10 To increase Sports activity/social services
National level sports and cultural & technical activities have been organized. Institute participates and organize various national and international level activities such as Energy day, Science day, Yoga day, Woman day. Technical day etc.
Sports officer interact regularly with students and arrange facilities of sports, encourage the students for participation at national level competitions. Coordinators of each clubs meet weekly and decide activities to be performed at institute level.
11 Trained students under Skill Development Program
More students have been trained under various schemes of central and state government such as PMKVY
Coordinator of S&D visits the class rooms regularly and assess the performance of trainee, and arrange better environment to improve themselves.
12 To improve the quality of rural areas under the “Unnat Bharat Abhiyan”
Institute is participating in full sprit under “Unnat Bharat Abhiyan” for the development and betterment of rural area
Coordinator of Unnat Bharat Abhiyan takes the meeting of concern faculty & students and make the plan weekly for the betterment of rural areas
179
10.1.3. Governing body, administrative setup, funct ions of various bodies, service
rules, procedures, recruitment and promotional poli cies (10)
Organizational Chart showing the hierarchy of administration and academic is given below
Board of Governors (B.O.G.)
Committee formed by BoG
Director & Member Secretary
Dean R&D
Dean Student Welfare
HoD Professor
PIC (Finance)
PIC Establishment
Dean Academic
PIC Sports
PIC Library
PIC Building Section
T&P Officer
Supporting Staff Class III & IV
Professor, Asso.
Professor, Asstt.
Professor
Account Officer
Incharge Establishment
Registrar Sports Officer
Librarian Asstt. Engineer
Department Representative
Supporting Staff Class III & IV
Supporting Staff Class III & IV
Supporting Staff Class III & IV
Supporting Staff Class III & IV
Supporting Staff Class III & IIV
Supporting Staff Class III & IIV
Supporting Staff Class III & IIV
Supporting Staff Class III & IIV
Supporting Staff Class III & IIV
For the smooth functioning of administration, following committees are formed.
(1) Administrative Committee
(i) Board of Governors
S. No. Member list Frequency of Meeting
1. Shrimant Shri Jyotiraditya M. Scindia, Chairman Minimum Two meetings per year. However, the meeting may be scheduled as and when necessary.
2. Sh. Motilal Vora, Vice Chairman 3. Dr. Laxmikant Markhedkar, Secretary 4. Er. Ramesh Agrawal, Treasurer 5. Secretary , Finance , M.P. Government, Member 6. Secretary , Technical Education , M.P. Government, Member 7. Chairman Vidisha Municipal Council, Member 8. Chairman Distt. Cooperative Bank Vidisha, Member 9. Justice (former ) N.K.Modi, Member 10. Dr. K.K. Agrawal , Member 11. Sh. Bharat C Chhaparwal, Member 12. Sh. Prashant Mehta (IAS retd.) , Member 13. Sh. Bimal Julka IAS, Member 14. Sh. Laxmikant Agrawal, Member 15. Representative , Rajiv Gandhi Proudyogiki Vishwavidyalaya ,
Bhopal, Member 16. Regional Officer , A.I.C.T.E Bhopal, Member 17. Dr.C.M. Chitle Representative of UGC, Member 18 Sh. Mahendra Sethia, Member 19. Director ,S.A.T.I. Vidisha, Member
180
Function and Responsibility
1. To manage the affairs of the S.A.T.I. (Degree) & to regulate its expenditure.
2. To determine the cadre and grades of the Departments and to create, suspend or
abolish posts and to fix the emoluments and the terms of service of the employees of the
Institute.
3. To appoint all staff in accordance with the regulations drawn up for the purpose.
4. To grant leave and allowance to determine conditions of service to enter into service
contracts and grant extension of service to staff.
5. To impose penalties on the staff in accordance with the procedure laid down, for the
purpose.
6. To consider the annual report and audited accounts for the previous financial year and
the budget estimates of the ensuing year and to take decision thereon.
7. To appoint qualified auditors every year and to fix their remuneration.
8. The decision of the Governing Body in all matters pertaining to the managements of the
Institute should be final and should not be subject to any revision by the Society or by
any other organization under it.
Managing Committee
Member list Frequency
of Meeting
Shrimant Shri Jyotiraditya M. Scindia, Chairman Periodically Dr. Laxmikant Markhedkar, Secretary Er. Ramesh Agrawal, Member Justice (former ) N.K.Modi, Member Sh. Prashant Mehta (IAS retd.) , Member Director ,S.A.T.I. Vidisha, Member
Function and Responsibility
(a) Subject to the general control of the Board of Governors the day to day administration
and management of the Institute established by the society shall be entrusted to a
Managing Consisting of not more than five members which may exercise such powers
as may be delegated to it by the Society.
(b) The Board of Governors may from time to time nominee one Managing Committee for
each of the institution run by it and shall also nominee its office bearers from amongst
the nominated members. The Board of Governors shall be free to include in the
Managing Committee such persons as may not be the members of the society.
(c) The term of office of the members of a Managing Committee as nominated shall be one
year from the date of nomination.
181
(2) Academic Committees : Following committees are constituted for academics matters of the institute.
(i) Academic Affair Committee
Member list Function and
Responsibility Frequency of Meeting
Dr. Sanjay Bhandari To take decisions on all academic and routine administrative matters.
Twice in a month Dr. Pankaj Agarwal
Dr. Kanak Saxena Dr. R.N. Shukla Dr. Pramod Sharma, Dean (Academic) Dr. Shailesh Jalori Dr. Shailendra Shrivastava Dr. Jytosna Ogale Dr. Manorama Saini Prof. Sudhir Phulambrikar Special Invitees
(ii) Proctorial Board Committee
Member list Function and Responsibility
Frequency of Meeting
Dr. Lokesh Bajpai To deal with cases of student conduct and discipline and decide suitable action
Periodically as and when required.
Dr. Sanjay Bhandari Dr. Pramod Sharma (Dean Academic) Dr. Shailendra Shrivastava Prof. C.S. Sharma Dr. Manorama Saini Prof. S.S. Goliya Dr. Umesh Banodha Dr. Vinita Singh Prof. Vidhi Rawat Er. Praveen Karkare (Registrar)
(3) Being an autonomous institute, following Academic Autonomy Committees have been
constituted under Statue-37 of Rajeev Gandhi Prodhyogiki Vishwavidhlaya, Bhopal (i) Governing Body
Member list Function a nd Responsibility
Frequency of Meeting
Three members to be nominated for a period of 2 years by the management of the college of whom one shall be the chairman. The person so nominated shall include at least one outstanding educationist/ scientist/ technocrat/ jurist/ management expert
To lay down service conditions, regulates and enforce discipline among staff, Financial management and other academic and administrative matters.
Thrice in a year
Two senior most teachers of the college to be nominated by rotation according to seniority, by the Director/ Principal for a period of two years One nominee of the University not below the rank of Professor One nominee of the State Government one nominee of the University Grant Commission; and The Principal of the college – Ex-officio Member-Secretary
182
(ii) Academic Council
Member list Function and Responsibility
Frequency of Meeting
The Director/Principal of the College – Chairperson To finally approve course of study, scheme of examination and syllabus. Maintain academic standard.
Once in a year All Heads of Departments-Member
One Professor from each of the Department by rotation for a period of one year according to seniority-Member One Reader from each Department by rotation for a period of one year according to seniority-Member Three University representatives nominated by the Vice Chancellor-Member Director of Technical Education or his nominee-Member The Chairman and the Secretary of the Governing Body- Member Dean (Academic)
(iii) Board of Studies (In each Department)
Member list Function and Responsibility
Frequency of Meeting
Head of the Department of the subject in the University or his nominee
To take decision on examination related matters, recommend syllabus scheme etc.
Once in a year
Head of the Department of the subject concerned in the college, not below the rank of the reader, Not more than two Faculty Members of that subject in the college Not more than two experts from outside the College/ University.
In addition to these committees, other committees are also constituted for specific purposes. Academic departments also have committees at department level. Service Rules and Policies :
The institute, being a government aided institute, adheres to all the service rules and procedure as notified by the government of Madhya Pradesh and amended from time to time. The selection and promotion of teachers is as per AICTE (All India council for Technical Education) norms and as approved by government of Madhya Pradesh and BoG of the Institute. Selection of teachers is done by a selection committee constituted as per norms of AICTE and Government of Madhya Pradesh. Reservation for SC/ST/OBC and Other classes in recruitment and promotions is provided as per state government policy and Roster.
10.1.4. Decentralization in working and grievance r edressal mechanism (5)
Administrative powers have been delegated to senior faculty members by appointing them as Dean, Co Dean, Professor In Charges of different sections and activities. All the matters pertaining to any section or activities is placed before concern Professor Incharge or Dean for disposal who dispose the matter in consultation with the director or the management.
List of faculty members with administrative responsibilities is given below:
183
Member list Administrative Responsibility
Function
Dr. Sanjay Bhandari Dean Student Welfare
All matters related to student welfare and discipline
Dr. Sanjay Katarey Coordinator, NBA Accreditation
NBA Accreditation
Dr. Kanak Saxena Professor-in-Charge Establishment section
All service matter of the employees
Dr. Pramod Sharma Dean Academic All academic matters Dr. Ashutosh Datar Placement Officer Carrier guidance, Placement,
Industrial training and Interaction Dr. Rajeev Jain Professor-in-Charge
Library section Supervision of Central Library
Dr. Shailesh Jalori Professor-in-Charge Account section
All financial planning control, Budget
Shri Sudhir Phulambrikar Controller Examination
Conduction of examination as autonomous institute of RGPV, Bhopal
Dr. S.S. Goliya Professor-in-Charge Student Scholarship section
Scholarship Affairs
Dr. Umesh Banodha Professor-in-Charge Security section
Supervision of campus security
Shri Sanjay Saraswat Professor-in-Charge Vehicle, Water supply, Building section, Sports
Construction and maintenance, vehicle maintenance and campus water supply, sports activities
Dr. Sunil Joshi Professor-in-Charge Computer Maintenance section
Supervision and maintenance of hardware and software
Shri Praveen Karkare Public Information Officer
To provide information under RTI act.
Grievance Redressal System : All the Staff member (faculty and supporting staff) can place their grievance to the competent higher authorities. Staff members can meet with the director and management regarding their demand and grievance for which administration always resolve sympathically in the best interest of the institute and employees. Every Saturday has been reserved by the Director for such meetings. Similarly all students can meet dean student welfare or any concerned teacher or director for their grievances.
A separate women grievance cell has been constituted under the chairpersonship of a senior woman faculty member with representation of other women employee and one girl student representation each from UG and PG classes. The cell specially hear cases related to grievances of women employees and students and recommends suitable action to the authorities.
184
The institute has zero tolerance policy towards ragging. Anti ragging committees has been constituted comprises of faculty members to keep a strict watch on any undesirable activities and prevent any incidence of ragging or harassment.
185
10.1.5. Delegation of financial powers (5)
In order to have smooth functioning and speedy disposal, financial power have been delegated at different level as given below.
186
Head of the Departments : up to Rs. five thousand
Director : up to Rs. Fifty thousand Managing Committee : above One lac 10.1.6. Transparency and availability of correct/un ambiguous information in public
domain (5)
All the important information about the Institute like fee, admission, hostel, important student notice, recruitment notice, tender notice employee details etc are available on the Institute web site www.satieng.ac.in. The information on the website is updated regularly.
Being a government aided Institute, Right to Information act has been in force since its
implementation by the government of Madhya Pradesh. All the provision of the act are being followed in the Institute. Any type of information can be sought under the right to information act. All the mandatory information under the act has been uploaded on the Institute web site under link “ Right to Information”. As per the provision of the act, following officer are appointed as information officer and appellant authority.
Public Information Officer : Er. Praveen Karkare, Registrar Asst. Public Information Officer : Shri Rakesh Sagar, Computer Programmer First Appealant Authority : Dr.J S Chauhan, Director
Details of above officials with their mobile numbers are displayed at the prominent places
of the Institute.
10.2. Budget Allocation, Utilization, and Public Ac counting at Institute level (15) Total Income at Institute level: For CFY, CFYm1, CF Ym2 & CFYm3
CFY: Current Financial Year – CFYm1 (Current Financ ial Year minus 1), CFYm2
(Current Financial Year minus 2), CFYm3 (Current Fi nancial Year minus 3)
Year Total Income in CFY: Actual expenditure in CFY (till…) Total No. of
students in CFY:
Total No. of students
Fees Govt. Grant(s) Other Sources
(specify) Recurring
including Salaries
Non- recurring
Special Projects/Any other, specify
Expenditure per students
CFY 2015-16
123,557,103
State Govt.
56,300,000
21,087,150
230,723,540.89
14,528,542.00 85,106.43 2711
CFY 2016-17
118,040,645
State Govt.
49,273,000.00
31,462,178.55
225,643,169.56
37,307,468.15 85,406.20 2642
CFY 2017-18
108,425,053
State Govt.
49,599,999.00
27,161,157.09
236,809,655.71
15,224,184.32 94,951.75 2494
CFY 2018-19 up to
15.06.18
2,641,850.00
State Govt.
4,780,661.00
2,724,392.00
24,279,823.68
9,513,013.00 2.39 2327
Table B.10.2a
187
Item
Expenses CFY
2018-19 up to 15.06.18
Expenses in CFY 2017-18
Expenses in CFY 2016-17
Expenses in CFY 2015-16
Infrastructural built-up 739,564.00
2,433,931.00
3,882,075.00
10,295,376.00
Library 671774.00 95437.00 442534.00 2092590.00
Laboratory equipment 4077702.00 7487200.00 22754868.00 6999486.00
Laboratory consumables 8,707.00 65,967.00
103,669.00
175,163.00
Teaching and non-teaching staff salary
20,871,963.00
221,362,852.00
212,186,035.00
213,734,066.00
Maintenance and Spares 55710.00
R&D 216054.00 112266.00 1354063.00 73094.00
Training and Travel 1346947.00 1617975.71 8097210.29 1398587.00
Miscellaneous expenses * 3144826.00 5911305.61 4658792.86 3964785.00
Other, specify 3,399,153.68
15,380,836.71
13,353,465.56
16,814,311.89
Total 34532400.68 254467771.03 266832712.71 255547458.89
Table B.10.2b
10.2.1. Adequacy of budget allocation (5)
The allocated budget is sufficient to meet the financial need of the institute. However due to decline in
Grant in recent years, financial status is a bit strain.
10.2.2. Utilization of allocated funds (5) The fund allocated in the budget has been utilized as per the budget provisions.
10.2.3. Availability of the audited statements on the institute’s website (5) The audited statements for the last three years are available on the institute website.
10.3. Program Specific Budget Allocation, Utilization (30)
Total Budget at program level: For CFY, CFYm1, CFYm2 & CFYm3
CFY: Current Financial Year – CFYm1 (Current Financial Year minus 1) CFYm2 (Current
Financial Year minus 2) CFYm3 (Current Financial Year minus 3)
10.3.1. Adequacy of budget allocation (10) The allocated budget is sufficient to meet the financial need of the department. However due to decline
in income from fee component in recent years, financial status is a bit strain
10.3.2. Utilization of allocated funds (20)
The fund allocated in the budget has been generally utilized as per the budget provisions
10.4. Library and Internet (20) 10.4.1. Quality of learning resources (hard/soft) ( 10)
Institute has a central library which has a rich collection of books/journals/periodicals etc. Details of the library are as under.
188
� Library space and ambience, timings and usage, avai lability of a qualified librarian
and other staff, library automation, online access, networking, etc. � Carpet area of library (in m): 495.89 Sqm. or 5330.8 Sqft. � Reading space (in m): 154.49 Sqm. or 1663.86 Sqft. � Number of seats in reading space: 65 � Number of Books Circulation per day: 165-200 � Number of users per day: 250-300 � Number of users (reading space) per day: 100-125 � Timings: During Working day: 09:00 AM to 8:00 PM � Number of library staff: 11 � Number of library staff with degree in Library: 02 � Management Computerization:
• For search: YES • Indexing: YES • Issue/return records Bar coding used: YES
� Library services on Internet/Intranet: • E-Books Access & Downloading Facility. • E-Journals Access & Downloading Facility. • NPTEL – Lecture Videos Access Facility • NPTEL – Courses Accessing Facility • OPAC (Online Public Access Catalogue)
� Consortium Membership:
• Shodh Sindhu, INFLIBNET, Gandhinagar • N-List INFLIBNET, Gandhinagar
� Library Total No. of Books (Hard/Soft):
Year Total No. of Books Hard Copy Soft Copy (Subs. +Through N -List)
2017-18 74346 136054 2016-17 74343 136054 2015-16 74245 94052
� Total No. of Journals/Technical Megazines
Year No. of total technical Journals/Magazines Subscribe d Hard Copy Soft Copy (Through N -List)
2017-18 55 6472 2016-17 95 6746 2015-16 105 8344
� Digital Library
� Member of National Digital Library, IIT Kharagpur � Availability of digital library contents: YES � Number of courses availability of an exclusive server: 19 Nos. � Availability over Internet/Intranet:
• E-Books: 136054 Nos. • E-Journals: 6472 Nos.
� Number of users par day: 250-300 Departmental Library is available with rich collection of reference texts. Institute provides
NPTEL lectures on INTRANET. Industrial Visits, Expert talks and workshops are organized from time to time. Students are also encouraged to participate in the events of other premier institution.
189
Institute is very specific to ensure that the classroom teaching, laboratory learning and the concept of self learning methodology is practiced seriously and sincerely. Classroom teaching material (ppts, tutorials, handout), Lab learning material (assignments & manuals) and the self learning material is updated routinely. Institute strives to develop in house and/or procure latest self learning material from outside. Faculty always keeps in mind that advancement in research and development is only possible if one is in tune with the ongoing worldwide research. Departmental libraries of all the departments are equipped with state of the art self learning materials in the form of Computer Based Training materials (CBTs).
Teaching learning materials developed by institutes of higher learning such as IITs and
NPTEL are procured to upgrade the subject knowledge of students. Good quality laboratory manuals and topic specific learning materials have been developed in house. Time to time brain storming sessions are conducted in every department to upgrade the self learning materials and course file notes are submitted for peer review. Apart from above, students are emphasized to make full utilization of self study and seminar / group discussion periods incorporated in the curriculum by the Institute.
10.4.2. Internet (10)
* Name of the internet provider : NKN (National Knowledge Network) ISP Railtel
* Available Bandwidth : 100 Mbps
*Wifi Availability : Yes, External WiFi Access points installed in the campus including Hostels, Main Building, Workshop. Departments.
*Internet Access in Labs classrooms, Library and offices of all departments
: Yes, via Managed Network switches (L-2,L-3) connected to library, offices, labs thru fiber optic cable.
*Security Arrangement : for Internet security Cyberoam (300iNG) hardware firewall is installed in the campus