Upload
others
View
19
Download
2
Embed Size (px)
Citation preview
RECIPROCATING COMPRESSORSEMI-HERMETIC
MULTIPLE COMPRESSORS UNIT WITH LEADING INVERTER COMPRESSOR
ORIGINAL MANUFACTURED EQUIPMENT
Watch BITZER video
// 2
iPac racks nomenclature is reported here below, with clear similarities to MultiPac designation:
Identification for iPac unit
Index for the frame configuration
Code for the number of compressor installed on the rack
Identifier for application (K for medium and Low temperature, H for High temperature)
Code to identify the VARISPEED compressor model
Identification of the standard compressor model
In a world where energy efficiency and sustainability are key factors for the user of any kind of refrigeration projects, adjustability becomes an additional driving force for the design of the iPac range of units.
The high adjustability is required especially to follow adequately the variation of the refrigeration load along the whole running time of the system. The integration of the inverter technology through the use of the VARISPEED compressor by BITZER, allows the required modulation and adaptation that any designer is looking for. This gives the potential to lift the evaporating temperature and stabilizes fluctuation in condensing pressure to reduce the energy consumption.
PRODUCTS SPECIFICATIONS
FEATURES
The iPac, in the 2, 3 and 4 compressors configurations, will offer a compact and plug & play solution to be fit into any refrigeration applications where otherwise a multiple condensing unit installation will be required.
The iPac range is a further identification of the basic phylosophy of the Added Value Products by BITZER. It incorporates all the high quality features of the well known and qualified MultiPacs semi-hermetic reciprocating compressor racks and at the same time it includes additional features characteristics of this new technology.
VARISPEED compressor by BITZER with suction gas cooled inverter, to provide maximum flexibility and efficiency also at part load.conditions
Standard electrical board with customized controller that will simplify the installation of the unit.
Extremely easy access to compressors and all replaceable parts fitted on the unit.
Flexible eliminator and electronic oil level control on each compressor for maximum reliability.
iP - 103 - K - 4EEF - 4DES
iP - 103 - K - 4EEF - 4DES
iP - 103 - K - 4EEF - 4DES
iP - 103 - K - 4EEF - 4DES
iP - 103 - K - 4EEF - 4DES
iP - 103 - K - 4EEF - 4DES
// 3
MEDIUM AND LOW TEMPERATURE PERFORMANCE TABLEThe medium and low temperature series of iPac units are available for operation on R404A*. With the introduction of Ecoline compressor the series of iPac K can cover both medium and low temperature application and the table here below reports capacity and heat rejection for different conditions. Specific conditions of a project can be calculated with the use of the BITZER selection software
Suction gas Temperature: +20°C (according to EN12900)VARISPEED frequency: 80Hz
The low temperature range of iPac will be available only for operation on R404A. The cooling capacities of each unit are reported in the performance tables here below:
iP-102-K-4EEF-4DES iP-102-K-4DEF-4CES
iP-102-K-4CEF-4TES
iP-103-K-4FEF-4EES
iP-103-K-4EEF-4DES
iP-103-K-4DEF-4CES
iP-103-K-4CEF-4TES
iP-104-K-2DEF-2CES
iP-104-K-4FEF-4EES
iP-104-K-4EEF-4DES
iP-104-K-4DEF-4CES
iP-104-K-4CEF-4TES
304050304050304050304050304050304050304050304050304050304050304050304050
41.234.928.449.642.134.561.652.042.548.641.233.559.050.140.971.360.549.689.375.361.346.839.732.163.653.943.976.965.353.392.978.864.7117.098.680.2
-10 -20 -30 -10 -20 -30 26.822.618.232.527.322.140.133.426.831.626.721.638.532.526.246.639.231.758.148.338.630.926.020.741.435.028.350.242.334.260.851.041.376.163.250.4
16.513.710.920.116.613.224.620.115.719.516.413.023.819.815.728.823.818.935.528.922.419.115.812.225.621.417.031.025.820.537.531.024.646.537.729.1
54.149.644.465.159.753.780.773.766.069.864.057.383.476.568.8
101.092.483.285.377.568.861.055.949.782.976.068.1
100.291.982.5
121.0110.799.5
151.9138.2123.3
37.934.730.945.841.837.456.451.045.248.944.840.058.653.748.170.864.457.659.353.446.843.139.334.758.153.447.870.364.457.684.977.369.2
105.795.283.9
25.323.020.230.727.724.537.333.228.832.729.726.239.435.831.747.242.437.439.134.629.628.926.122.539.035.631.547.142.737.856.751.145.269.661.753.1
Model Cond.Temp.
˚CEvaporating temperature ˚C
Cooling capacity [kW] Heat Rejection [kW]
// 4
DIMENSION DRAWINGS
iP-102-K-4EEF-4DES
iP-102-K-4DEF-4CES
iP-102-K-4CEF-4TES
iP-103-K-4FEF-4EES
iP-103-K-4EEF-4DES
iP-103-K-4DEF-4CES
iP-103-K-4CEF-4TES
iP-104-K-2DEF-2CES
iP-104-K-4FEF-4EES
iP-104-K-4EEF-4DES
iP-104-K-4DEF-4CES
iP-104-K-4CEF-4TES
Model
F552T
F552T
F732N
F552T
F732N
F732N
F1052T
F552T
F732N
F732N
F1052T
F1202N
Pump down volume (kg)
51.9
51.9
70.2
51.9
70.2
70.2
100.9
51.9
70.2
70.2
100.9
107.7
Inlet
2 1/8”
Outlet
7/8”
1 1/8”
Connections Liquid receiverDimensionsModelC [mm]
1350
1700
B [mm]
850
A [mm]
1230
1450
1960
D [mm]
1530
1750
2260
A B
C
D
// 5
SCHEMATIC DIAGRAM
HIg
h Pr
essu
re G
auge
Low
Pre
ssur
e G
auge
Lo
w P
ress
ure
Switc
h Au
toH
P Pr
essu
re S
witc
h M
anua
lSo
leno
id V
alve
Ball
Valv
e / V
alve
Sigh
t Gla
ss
Filte
rTX
VVi
brat
ion
Elim
inat
orC
heck
Val
veO
il Fl
ow S
witc
hO
il C
ontro
l Val
ve
NOTES
NOTES
PT. Bitzer Compressor IndonesiaJl. Raya Tlajung Udik No.2 Gunung Putri
Bogor 16962, IndonesiaTel +62 (0) 21 8671041 // Fax +62 (0) 21 8670386
www.bitzeravp.com • [email protected]
Subject to change // 03.2013