Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
SSEEII//EELLEEXXR S D I S C H A R G E E L E C T R O D E
6 6 9 0 We s t N i n e M i l e R o a d • P e n s a c o l a , F l o r i d a 3 2 5 2 6 • 850 / 944 - 4475 • F a x : 850 / 944 - 8268
HHOOWW TTOO TTEELLLL TTHHEE OORRIIGGIINNAALL from all the copies.
Cantilevered Suspension of Dual Emitter ArmsEliminates Dust Build Upand Guarantees uniformCorona Distribution
Heavy 10 Gauge Top andBottom Attachment ClipsEliminate Hanger Failures
Roll Formed 2 Piece TubularSupport member EliminatesFatigue and Breakage
DDOO NNOOTT SSEETTTTLLEE FFOORR AA CCOOPPYY -- insist on the original!
Why are so many precipitator manufactures copying the SEI style rigid electrode? There is bound to be confusion, but it is easy to tell the original —SEI's ELEX Electrodes.
• Look for equally spaced dual emitter sources. They assure equal corona over the entire length of the electrode.
• Look for cantilevered suspension of the emitter arms away from the center support. It is a design feature that makes sure dust cannot build up and cover the discharge points.
• Look for performance. This is why everyone is copying SEI's ELEX Electrode design. After all, performance is what you are really buying.
IF YOUR PRECIPITATOR IS IN NEED OF ONE OF THE FOLLOWING:Rebuilding • Upgrading • Plant Life Extension • Fuel SwitchingHot to Cold Conversions, specify the original ELEX Electrode.
The SEI Rigid Electrode has been retrofitted into 8", 9", 10", 11", 12", and 16" spaced units replacing weighted wires.
• MORE INSTALLATIONS THAN ANY OTHER MANUFACTURER• OVER 25 YEARS INSTALLED EXPERIENCE• OVER 1000 PRECIPITATOR INSTALLATIONS WORLDWIDE• OVER 500,000,000 LINEAR FEET IN SERVICE.
For more than twenty-five years SEI/ELEX
electrostatic precipitators have been equipped with
their patented ELEX DISCHARGE ELECTRODES.
It can be seen in the above illustration that the
ELEX DISCHARGE ELECTRODE consists of a
rigid tubular support to which the discharge points
are positively attached by spot welding. The ELEX
DISCHARGE ELECTRODE is, in turn, firmly
connected to its own suspension system.
This unique electrode is incorporated in over a
thousand SEI/ELEX precipitators world wide with
over 500,000,000 linear feet of installed electrodes in
the United States.
• It is unbreakable and is not subject to electrical
erosion or mechanical wear, which are the
principal causes of discharge electrode failure.
• Improved Cleaning Effects. The vibrations
created by the rapping system are transmitted
over the entire length of each and every electrode.
• Optimum Corona Effect. The corona discharge is
guaranteed at every point because the points are
geometrically disposed throughout the whole
effective column of the precipitator. The excellent
corona effect ensures optimum charging of
particles and, therefore, a superior and constant
cleaning efficiency is achieved.
• No Bending or Distorting. The provisions of
suitable guides ensure that the ELEX
ELECTRODE will not bend or deform, even
when it is subjected to excessive variations of
temperature in the precipitator.
• The ELEX ELECTRODE has been installed new
or retrofitted in gas passages spaced from
8" to 16".
The ELEX DISCHARGE ELECTRODE is
essential to the high efficiency and reliability
required of the precipitator. To find out more
about this proven system and how Southern
Environmental, Inc. can make your precipitator
operate more efficiently, contact your field sales
representative or Southern Environmental, Inc.