SensorGlobal Creative Partner

Global Creative Partnerwww.dsec.co.kr

R&D Center555, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea

Head Office8-27 B/L, 743-5, Weonsi-dong, Ansan City, Gyeonggi-do, Korea tel. +82-31-494-1141, 495-1151 fax. +82-31-495-4887, 495-4888

Ⓒ2012 DAESUNG Electric Co., Ltd. All right reserved. This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or documentmay be reproduced in any form by any means without prior written authorization of DAESUNG Electric and its licensors, if any.Products shown on this catalog are subject to change without any prior notice.

This information provided in the brochure contains only general description or performance characteristics, which do not always apply as described in case of actual use or which may

change as a result of further development of the products. This information is not meant or intended to be a special guarantee for a particular quality. An obligation to provide the respective

characteristics shall only exist if expressly agreed in the terms of contacts. We reserve the right to change in availability as well as technical changes without prior notice.

Business Overview In today’s automobile industry, systems controlled by sensors have become an integral part of safe and secured life, and this has made most electro-mechanical devices more refined and more efficient with their applications. We have set up a separate sensor team in 1995 and started sensor business with electric pressure sensor. We have also started to supply sensors for automotive industry since 2005.

Currently we supply sensors in various applicationsFor power steering system, we supply steering angle sensor, torque sensor and torque angle combined sensor. For transmission, we supply position sensor and Yaw &G sensor for brake and ESC system.For emerging EV/HEV application, we supply current transducer for battery and VR type resolver for EV traction motor and hybrid system.

R&D CapabilityAlthough the development and deployment of a number of sensing technologies are emerging in automotive industry, there are challenges regarding robustness, reliability, quality and cost. We have our own capability to design, develop and produce automotive sensor satisfying these chal-lenges.

Magnet Field Sensing TechnologyWe have rich experience and know how of analysis of magnetic field and its sensing mechanism. Vari-ous projects enable us to build up high accurate analyzing technology of magnetic field and to develop sensing algorithm. Based on this technology, we have expanded our sensor application. For steering angle sensor, we de-veloped our own algorithm and registered design resulting the flexibility in design. For torque sensor, we have our own patent for magnet inducing way and the sensor structure. As a result, we can give additional benefits to customer.

DAESUNG Sensing Technology

Customers

Accreditations QS 9000, ISO 14001, ISO/TS16949, OHSAS18001, CMMI L2 & L3, ASPICE L2

We will try our best to become a Global Leading Company DAESUNG 1102 We will try our best to become a Global Leading Company DAESUNG

Global Development ProcessCMMI (Capability Maturity Model Integration) Daesung Electric is a CMMI Level 3 certified company. This industry-standard certification signals the com-pany’s commitment to product quality, production efficiency, and the ability to reduce associated costs. We have adopted CMMI since 2010 to meet demand for global car manufacturers and for the safety of drivers, and to legal regulations (PL law).

CMMI is a software development process improvement approach which has become the standard for measuring an organization’s capability to apply a process based methodology to software development.

With the CMMI Level 3 certification, Daesung provides the following benefits to its customers• Higher quality product with constant quality control at each development stage• Lower costs due to a produc tive and efficient process

• Established rules and procedures that encourages better communication with customers

• Organized documentation to showcase visibility of the product life cycle and development activities

System testing

Veri�cation

MIL

RP

Test

Phas

e

Design Phase

Veri�cation

Veri�cation(Static Analysis)

Test phase verification

Test phase verification

Test phase verification

HW-SW testing

Software testing

Validation(Dynamic Analysis)

Validation(Dynamic Analysis)

Validation(Dynamic Analysis)

Validation(Dynamic Analysis)

SW & HWintegration testing

Softwareintegration and

testing

Softwarearchitecture

design

Softwaretesting

Test phaseverication

System integrationand testing

Specification ofsoftware

requirements

System Design

Softwarearchitecture

design

Softwareunit

testing

Design phaseveri�cation

Design phaseveri�cation

Design phaseveri�cation

Development Process Road Map• CMMI Level 2 (2010)

• CMMI Level 3 (2011)

• ASPICE (2012)

• ISO26262 (2013)

• CMMI Level 4 (2016)

AUTOSAR (AUTomotive Open System ARchitecture)Daesung Electric provides a AUTOSAR solution which is an open and standardized automotive software architecture, jointly developed by automobile manufacturers, suppliers and tool developers.

MBD (Model Based Development)We develop software using MBD(Model Based Development) which is the latest software development methodology

We will try our best to become a Global Leading Company DAESUNG 03

Sensor Products for Vehicle System

For ESCWe supply steering angle sensor to calculate absolute angularity of steering wheel applying non contact technology

We supply sensor to measure Yaw rate and lateral G to gauge the vehicle’s movement.

For TransmissionWe supply sensor to measure the gear position using Hall IC.

For EPSWe supply Torque Only Sensor(TOS) and Torque and Angle inte-grated Sensor (TAS) applying to power steering system.

We will try our best to become a Global Leading Company DAESUNG04

Steering Angle Sensor Torque Sensor

• Using 2 magnetic field sensors • Output signal 2 analog cross data

• Resolution Minimum 0.1° • Supply voltage 5 ± 0.25V

• Angular Range -900°~ 900°• Output voltage

0.5~4.5V → Daesung can make PWM or SENT output signal• Total Error Band ±2°

• Non-linearity ±2° • Angle range ± 4.5 Deg.

• Hysteresis 0~3° • Resolution Less than 0.009 Deg (More than 10Bit)

• Angular Speed 2000 °/s • Sampling time Less than 1ms

• Storage Temp. -45℃ ~ 95℃ • Hysteresis Max 1% of the supply voltage

• Operating Temp. -40℃ ~ 90℃ • Linearity ± 2% of the supply voltage

• Operating Voltage 8~18V • Operating temperature -40 ~ +125℃

• Max. Current 300mA • Sensing type Applied linear hall sensor

• Using High speed CAN

• Mounting on Lower column Or on the combination switch

Yaw & G Sensor Position Sensor

• Analog/CAN Type • Output signal 2 analog cross data

• Fail-safe • Supply voltage 5 ± 0.25V

• One Package MEMS (Yaw rate, Accelerometer) Type • Output voltage 0.5~4.5V → Daesung can make PWM output signal

• Lateral Accelerometer

Range -1.7(g) ~ +1.7(g) • Angle range ± 30 Deg.

Resolution 1200(mv/g) • Resolution Less than 0.05 Deg (More than 10Bit)

Sensitivity Error ±3(%) • Response time max. 20ms

Off set Error ± 3(%) • Hysteresis max. 2% of the supply voltage

• Yaw rate

Range -75(deg/sec) ~ +75(deg/sec) • Linearity ± 2% of the supply voltage

Resolution 27(mv/°/s) • Operating temperature -40 ~ +125℃

Sensitivity Error ±3(%)- O • Sensing type Applied linear hall sensor

We will try our best to become a Global Leading Company DAESUNG 05

Sensor Products for Green CarCurrent TransducerWe supply open loop Current Transducer to measure current of HEV/EV using programmable hall IC. It is designed to work with a single +5V power supply to cover the whole primary current ranging from negative to positive current and optimized to minimize bus bar effect.

We supply Current Transducer in different types for different applications for Inverter and HDC and for battery pack and BDU (Battery Disconnect Unit).

Resolver Resolver is designed to realize the highly accurate absolute angle measurement and the extremely reliable usability in harsh environmental conditions.

We developed VR type resolver that produces two analog output signals with two phases proportional to sine and cosine of the angle of rotor by detecting a change of air gap (Permeance) between the rotor and the stator.

We apply this resolver to measure absolute position and velocity and apply this to traction motor and transmission of HEV/EV.

Resolver

Current Transducer

We will try our best to become a Global Leading Company DAESUNG06

LDC and Inverter Battery and BDU

ClassificationFast Response and High Voltage

Current TransducerHigh Accurate Current Transducer

Application +/- 1.0 % +/- 0.5%

Primary Current Measuring Range (IP) -500 A to +500 A -400A to +200 A

Linearity Error@ Ta=25°C, Vcc=5.0V +/- 1.0 % +/- 0.5%

Supply Voltage (Vcc) +5.0 V +5.0 V

Supply Voltage Range +4.5 V to +5.5 V +4.75 V to +5.25 V

Output Voltage (Vo) @ Ta=25°C, Vcc=5.0V, RL=10k

I=(+)IP 4.5 V±50 mV 4.5 V

I=0 2.5 V±50 mV 3.1667 V

I=(-)IP 0.5 V±50 mV 0.5 V

Offset Drift of Output Voltage @ Ip=0 < +/- 2.5 mV/°C < +/- 0.113 mV/°C

Maximum Current Consumption(Ic) < 30 mA < 10 mA

Response Time@ IP =400A, di/dt = 100A/us

< 10us < 10ms

Frequency Bandwidth@ 40 ARMS > 20 kHz(-3dB) > 50 Hz(0dB)

Operating Temperature -40 °C to +125 °C 40 °C to +70 °C

VR type resolver Function 8X-VRX 4X-VRX

Excitation Input AC 5Vrms 10KHz AC 7Vrms 10KHz

Primary Side R1-R1

Transformation Ratio 0.19±10% 0.28±10%

Accuracy ±30arc-min

Input Impendance : Zro 73.21±10% 45.62±10%

Output Impendance : Zss 534.2±15% 214.5±15%

Phase Shift -10˚±5%

DC Resistance R1-R2 14.7±10% 19.4±10%

S1-S3 46.8±10% 55.2±10%

S2-S4 52.0±10% 55.2±10%

Max Operating Speed 7200 min-1 20,000 min-1

Operating Temp. Range -40 °C to +150 °C

Current Transducer

VR Type Resolver

Main Feature • Open loop current transducers with programmable hall–effect IC. • Optimized flux sensing gate to minimize the bus-bar effect • Magnetic core shielding structure • Ratio-metric output voltage • Support diagnostic features

Main Feature • Highly reliable structure with no winding coil on rotor • Compact package dimensions with extremely thin structure • Robust performance under harsh environments • Extended operating temperature range: –55 °C to 155 °C

We will try our best to become a Global Leading Company DAESUNG 07

Engineering Capability Test & Analysis For analysis, we use the software tools of ANSYS, Mold-flow, e-flow, Maxwell and using 4 types of analysis soft-ware tools, we do mold flow analysis, finite element analysis, structure analysis and thermal analysis combined with MATLAM Simulimk.With this analysis, we can reduce the development time and cost.We have a test lab in R&D center and in this lab, we have equipments to evaluate and verify the proto sample.We have separate test lab in R&D center, and in this lab, we test the functional performance for different param-eters at different environmental conditions, measure the sensor characteristics data, and verify the design, etc. We can also test them at certain temperature and humidity condition when customer requires.

[Current Transducer DAQ & CONTROL SYSTEM] [Yaw & G Dynamic Test Line]

We will try our best to become a Global Leading Company DAESUNG08

In-House Manufacturing We have in -house production line for precision components like CNC Jig, grinding machine, stamping machine, and molding machine. Especially for automation manufacturing, we have an automation in-house team who empowers us to design automation lines, SMT lines and assembly lines in house, and specially dynamic test lines for sensor by ourselves. With this in-house capability, we can increase the productivity as well as quality by strictly managing the manu-facturing process.

[Performance Test Equipment] [Mounted Samples in Equipment]

We will try our best to become a Global Leading Company DAESUNG 09

Test Capability We have in -house test & evaluation center dedicated for inspection and evaluation of our product, and to test the general electric performance, environmental material, electrical and mechanical test with more than 20 test-ing and monitoring machines and equipments.To increase the test performance, we set up state of the art equipments including EMP testing equipments, accelerated weatherometer, vibro-chamber, endurance testing device as well as state of the art X ray inspection equipment.

Validation & Verification Test Center Overview • Test Center Member : 13 persons

• LAB Area: 1,200㎡

• Test Capability : 1,000 test items / year

• Test Equipments: 177 equipments (63 types)

• Certification : 3rd party accreditation (by KOLAS : Mar. 2000 )

• Vibro Chamber • Temperature & Humidity Chamber

• Tester for X-Ray Analysis • Chamber for EMC Test • Reliability Test Lab

We will try our best to become a Global Leading Company DAESUNG10

Business Overview In today’s automobile industry, systems controlled by sensors have become an integral part of safe and secured life, and this has made most electro-mechanical devices more refined and more efficient with their applications. We have set up a separate sensor team in 1995 and started sensor business with electric pressure sensor. We have also started to supply sensors for automotive industry since 2005.

Currently we supply sensors in various applicationsFor power steering system, we supply steering angle sensor, torque sensor and torque angle combined sensor. For transmission, we supply position sensor and Yaw &G sensor for brake and ESC system.For emerging EV/HEV application, we supply current transducer for battery and VR type resolver for EV traction motor and hybrid system.

R&D CapabilityAlthough the development and deployment of a number of sensing technologies are emerging in automotive industry, there are challenges regarding robustness, reliability, quality and cost. We have our own capability to design, develop and produce automotive sensor satisfying these chal-lenges.

Magnet Field Sensing TechnologyWe have rich experience and know how of analysis of magnetic field and its sensing mechanism. Vari-ous projects enable us to build up high accurate analyzing technology of magnetic field and to develop sensing algorithm. Based on this technology, we have expanded our sensor application. For steering angle sensor, we de-veloped our own algorithm and registered design resulting the flexibility in design. For torque sensor, we have our own patent for magnet inducing way and the sensor structure. As a result, we can give additional benefits to customer.

DAESUNG Sensing Technology

Customers

Accreditations QS 9000, ISO 14001, ISO/TS16949, OHSAS18001, CMMI L2 & L3, ASPICE L2

We will try our best to become a Global Leading Company DAESUNG 1102 We will try our best to become a Global Leading Company DAESUNG

SensorGlobal Creative Partner

Global Creative Partnerwww.dsec.co.kr

R&D Center555, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea

Head Office8-27 B/L, 743-5, Weonsi-dong, Ansan City, Gyeonggi-do, Korea tel. +82-31-494-1141, 495-1151 fax. +82-31-495-4887, 495-4888

Ⓒ2012 DAESUNG Electric Co., Ltd. All right reserved. This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or documentmay be reproduced in any form by any means without prior written authorization of DAESUNG Electric and its licensors, if any.Products shown on this catalog are subject to change without any prior notice.

This information provided in the brochure contains only general description or performance characteristics, which do not always apply as described in case of actual use or which may

change as a result of further development of the products. This information is not meant or intended to be a special guarantee for a particular quality. An obligation to provide the respective

characteristics shall only exist if expressly agreed in the terms of contacts. We reserve the right to change in availability as well as technical changes without prior notice.