Upload
lethien
View
216
Download
0
Embed Size (px)
Citation preview
Telephone Fax EmailADELAIDE (08) 8228 2411 (08) 8223 3413 [email protected]
BRISBANE (07) 3375 4499 (07) 3375 4488 [email protected]
EMERALD (07) 4988 1800 (07) 4982 0280 [email protected]
DEVONPORT (03) 6427 0908 (03) 6427 0522 [email protected]
LAVERTON (03) 9371 9000 (03) 9360 0484 [email protected]
MACKAY (07) 4952 4056 (07) 4952 4367 [email protected]
MELBOURNE (03) 8551 0500 (03) 8551 0508 [email protected]
NEWCASTLE (02) 4964 2123 (02) 4964 2235 [email protected]
PERTH (08) 9454 9311 (08) 9454 9366 [email protected]
SYDNEY (02) 9838 9033 (02) 9838 9133 [email protected]
Cop
yrig
ht (
C)
2004
-201
3 -
Sou
thco
tt P
ty L
td
The Complete Solution
September 2013
Important Warnings and Cautions:
WARNINGS:Do not mix and match products.The mixing of product brands in hose assemblies is not recommended.Hydraulic hose from one supplier has seldom been verified by testing with fittings fromanother. Performance capabilities of such mixed assemblies will therefore be unpredictableand are not guaranteed by either supplier. Hose coupling specifications and publishedassembly instructions are not necessarily valid in these instances.It is the hose assembler’s responsibility to consult with suppliers before intermixing hose andend fittings. Similarly, assembly equipment is not usually interchangeable and it is the fabricator’sresponsibility to consult with the manufacturer for the correct equipment.Always follow the manufacturer’s instructions for correct preparation and fabrication ofCHILD-GATES hose assemblies.The welding of any CHILD fitting, including weld-on, salvage, lifesaver or any othercomponents should only be carried out by suitably qualified personnel. The Company doesnot warrant the performance of such fittings or products, once welded (except by theCompany, its servants or its selling agents). These welded products should be tested andproved fit for the use intended. Not testing, not proving, faulty fabrication or faulty weldingmay result in an unsatisfactory or even dangerous product.
BE AWARE THAT:Hydraulic fluid under pressure can be potentially dangerous! An explosive burst orstream of escaping fluid can cause damage to equipment or serious injury to persons nearby.Highly pressurized fluid escaping from a small pinhole can be almost invisible, and yet exertextreme force capable of penetrating the skin and other tissues, causing possible severeinjury.Pressurized fluids, if released uncontrolled, can exert a tremendous explosive force.Hot fluids or chemicals can cause severe burns.Some fluids are highly flammable
CAUTIONS:Working Pressures for Hose AssembliesSince many factors influence the pressure at which a hydraulic system will or will not performsatisfactorily, stated maximum hose working pressures should not be exceeded.For any severe applications it is recommended sufficient testing be conducted and reviewedby both the hose assembler and the machine manufacturer to assure performance levels willbe safe and satisfactory.
While all care has been taken to ensure that information contained in this catalogue istrue and correct at the time of publication, Southcott Hydraulics gives no warranty orassurance, and makes no representation as to the accuracy of any information oradvice contained in this catalogue, or that it is suitable for your intended application.
I
Fluid Connectors Product GuideContents
Nomographic Chart ........................................................ IIOil Flow Capacity Of Hose & Tubing ........................... IIIChild Coupling End Style Nomenclature....................... IV
SECTION 1: HYDRAULIC HOSE ................................................ 1Extremely High Pressure................................................ 1.3High Pressure ................................................................. 1.7Medium Pressure............................................................ 1.15Fleet Application ............................................................ 1.17Thermoplastic................................................................. 1.20Low Pressure .................................................................. 1.25Refrigerant...................................................................... 1.28Industrial......................................................................... 1.28Marine ............................................................................ 1.29Automotive..................................................................... 1.29Stainless Steel................................................................. 1.33Fire Suppressant ............................................................. 1.33Hose Accessories & Protection ...................................... 1.34
SECTION 2: FIELD-FIT COUPLINGS........................................ 2Lock-On ......................................................................... 2.13Clamp-On ....................................................................... 2.15
SECTION 3: PERMANENT CRIMP COUPLINGS.................... 3Super-Crimp Two-Piece Couplings ............................... 3.7Ezi-Crimp One-Piece Couplings.................................... 3.17Global-CrimpTwo-Piece Couplings (GS & GSP) ......... 3.19Global-Crimp GSH One-Piece Couplings ..................... 3.25Maxi-Crimp Two-Piece Couplings ................................ 3.28Vacu-Crimp One-Piece Couplings................................. 3.30
SECTION 4: ADAPTORS............................................................... 4
SECTION 5: ACCESSORIES......................................................... 5Quick Release Couplings ............................................... 5.3Swivel Joints (Tema)...................................................... 5.10Porta-Power Hoses ......................................................... 5.11Pipe Clamps.................................................................... 5.12Swivel Joints (Hydraulics Inc) ....................................... 5.17Rotary Couplings (MTC) ............................................... 5.20Pressure Gauges ............................................................. 5.20Test Points ...................................................................... 5.22Hydraulic Tube............................................................... 5.24Compression Fittings...................................................... 5.25Hose Clamps .................................................................. 5.26Swaging Machines ......................................................... 5.29Cut-Off Saws.................................................................. 5.29
III
OIL
FLO
W C
APA
CIT
Y O
F H
OS
E A
ND
TU
BIN
G
INS
IDE
DIA
ME
TE
R
SU
CTIO
N L
INE
S
(-0
.25
TO 0
BA
R)
HIG
H E
FFIC
IEN
CY L
INES
(0 T
O 3
5 B
AR
)C
ON
TIN
UO
US R
UN L
INE
S
(36
TO 2
07
BA
R)
I NT
ER
MIT
TEN
T R
UN L
INE
S
(20
8 B
AR
& A
BO
VE)
1.2
M/
SEC
4FT/
SEC
3M
/S
EC
10
FT/
SE
C4
.5M
/S
EC
15
FT/
SEC
6.1
M/
SEC
20
FT/
SEC
LTR
/M
INU
S G
PM
LTR
/M
INU
S G
PM
LT
R/
MIN
US
GP
MLTR
/M
INU
S G
PM
1/
4”
2.3
0.6
5.7
1.5
92.3
11
3
5/
16
”3.8
19
2.4
14
3.6
18
4.8
3/
8”
5.3
1.4
13
3.4
19
527
7
1/
2”
9.5
2.5
23
634
945
12
5/
8”
15
3.8
38
10
53
14
72
19
3/
4”
21
5.5
53
14
79
21
106
28
7/
8”
28
7.5
72
19
107
28
142
37
1”
38
10
85
25
140
37
185
49
1 1
/4
”57
15
144
38
216
57
231
61
1 1
/2
”83
22
209
55
314
83
416
110
1 3
/4
”114
30
285
75
426
112
570
150
2”
148
39
371
97
556
147
742
196
2 1
/2
”231
61
579
153
870
230
1158
306
3”
333
88
832
220
1249
330
1669
441
IV
Coupling End Style Nomenclature
Child couplings feature a meaningful description by combining end-style codes shown below that make thread end identification fast and easy. Always refer to Child Crimp Data Charts when selecting hose and coupling combinations.
In the following example, the Child description SFJ90C-0906 identifies a Supercrimp female JIC swivel 90° close coupling for 9/16” thread size and 3/8” hose size.
S F J 90 C - 09 06
Series
ThreadOrientation
ThreadType
Angle
AngleType
ThreadSize
HoseSize
SeriesE Ezicrimp - 1 pieceS Supercrimp - 2 piece
C5 Field-Fit - suit R5 hoseC5E Field-Fit - suit R5E hoseR Field-Fit - suit R1, R2 & R3 hoseL Lock-On - suit pushlock hose
Thread OrientationF FemaleM Male
Thread TypeB BSP TaperedDKL DIN Light SeriesDKS DIN Heavy SeriesDKO DIN Heavy Series & O-RingFL Flange Code 61FLH Flange Code 62FLK Flange KomatsuFO Flat Face O-Ring (ORFS)G Grease FittingGAZ French GAZ
Thread Type (cont’d)HJ Hose JoinerIX SAE Inverted FlareJ JICK JIS-Metric (Japanese)LS LifesaverN NPTNF NPT - Female FixedNL NPT - Long SeriesNP JIS-BSPP (Japanese)OX SAE O-Ring Boss SwivelP BSP ParallelS SAESS Staple Series
Angle(none) Straight45 45° Bend90 90° Bend
Angle Type(none) Standard DropC Close L Long Drop
Code Description Code Description
Due to continual product improvement., we reserve the right to alter specifications without notice 1.1
Section 1Hydraulic Hose
ContentsPart No. ................ Description ...........................................................................................................................Page
Extremely High PressureEFG6K .................. 4 & 6 Wire Spiral Hose (SAE 100R15) ..................................................................................1.3EFG6K-MTF......... 4 & 6 Wire Spiral Hose MegaTuff®(abrasion-resistant cover)(SAE 100R15) ......................1.3EFG5K .................. 4 & 6 Wire Spiral Hose (SAE 100R13) ..................................................................................1.4EFG5K-MTF......... 4 & 6 Wire Spiral Hose MegaTuff®(abrasion-resistant cover) (SAE 100R13) .....................1.4EFG4K .................. 4 Wire Spiral Hose (SAE 100R12) .........................................................................................1.5EFG4K-MTF......... 4 Wire Spiral Hose MegaTuff® (abrasion-resistant cover)(SAE 100R12) ............................1.5EFG3K .................. 4 - Wire Spiral Hose (SAE 100R12 & EN8564SP)................................................................1.6EFG3K-MTF......... 4 - Wire Spiral Hose MegaTuff® (abrasion-resistant cover)(SAE 100R12 & EN8564SP) ..1.6
High PressureM5K ...................... 2 - Wire Braid Hose Mega 5000® ..........................................................................................1.7M5K-XTF ............. 2 - Wire Braid Hose Mega 5000® XtraTuff®(abrasion-resistant cover) ...............................1.7M5K-MTF............. 2 - Wire Braid Hose Mega 5000® MegaTuff®(abrasion-resistant cover) .............................1.7M4K ...................... 2 - Wire Braid Hose Mega 4000® ..........................................................................................1.8M4K-XTF ............. 2 - Wire Braid Hose Mega 4000® XtraTuff®(abrasion-resistant cover) ...............................1.8M4K-MTF............. 2 - Wire Braid Hose Mega 4000® MegaTuff®(abrasion-resistant cover) .............................1.8M3K ...................... 1 & 2 Wire Braid Hose Mega 3000® (SAE 100R17) ............................................................1.9M3K-XTF ............. 1 & 2 Wire Braid Hose Mega 3000® XtraTuff®(abrasion-resistant cover) (SAE 100R17) .1.9M3K-MTF............. 1 & 2 Wire Braid Hose Mega 3000® MegaTuff®(abrasion-resistant cover (SAE 100R17).1.9M2T....................... 2 - Wire Braid Hose MegaFlex® (SAE 100R16) ...................................................................1.10M2T-XTF.............. 2 - Wire Braid Hose XtraTuff® (abrasion-resistant cover)(SAE 100R16) ............................1.10M2T-MTF ............. 2 - Wire Braid Hose MegaTuff® (abrasion-resistant cover)(SAE 100R16) ..........................1.10CM2T.................... 2 - Wire Braid Hose MegaFlex® (SAE 100R2AT) Twin ......................................................1.11G2.......................... 2 - Wire Braid Hose (SAE 100R2 Type AT & DIN 20022 2SN)...........................................1.12G2XH.................... 2 - Wire Braid Hose Extreme Heat (SAE 100R2 & Flame Resistance U.S. MSHA 2G).......1.12G2H....................... 2 - Wire Braid Hose (SAE 100R2 Type AT & High Temperature DIN 20022 2SN) ............1.13J2AT...................... 2- Wire Braid (MHI J100).......................................................................................................1.14
Medium PressureG1.......................... 1 - Wire Braid Hose (SAE 100R1 Type AT & DIN 20022 1SN)...........................................1.15G1H....................... 1 - Wire Braid Hose (SAE 100R1 Type AT & DIN 20022 1SN) High Temperature ............1.15MegaTech 1000..... 1 - Wire Braid Hose (SAE J1402, SAE J1019 & DOT FMVSS 106-74) High Temperature 1.16MegaTech II .......... 2 - Wire Braid Hose (SAE 100R2AT & SAE 100 R2 Type S) High Temperature................1.16
Fleet ApplicationMegaTech 500....... 1 - Wire Braid Hose (DOT SAE J1019) Hot oil return hose ..................................................1.17C5C ....................... 1 - Wire Braid Hose (SAE 100R5) (SAE J1402 Type AII) ....................................................1.17C5E........................ 1 - Wire Braid Hose (SAE J1019 and SAE J1402 Type AI) ..................................................1.18G3H....................... 2 - Textile Braid Hose (SAE 100R3) High Temperature (DIN 20021) ..................................1.19
ThermoplasticTH8 ....................... 2 - Braid Hose (SAE 100R8 Black Covered Pin Perforated Thermoplastic Hose)) ...............1.20TH8NC.................. 2 - Braid Hose (SAE 100R8 Orange Covered Non-Conductive Thermoplastic Hose) ..........1.20TH7 ....................... 1 - Braid Hose (SAE 100R7 Black Covered Pin Perforated Thermoplastic Hose) ................1.21TH7NC.................. 1 - Braid Hose (SAE 100R7 Orange Covered Non-Conductive Thermoplastic Hose) ..........1.22TH7DL.................. 1 - Braid Twin Hose (SAE 100R7 Black Covered Pin Perforated Thermoplastic Hose).......1.23TH7NCDL ............ 1 - Braid Twin Hose (SAE 100R7 Orange Covered Non-Conductive Thermoplastic Hose).1.24
Low PressureGMV ..................... 1 - Helical Wire Hose MegaVac® (SAE 100R4) ...................................................................1.25Hozeflex ................ 1 - Helical Wire Suction Hose ................................................................................................1.25RLA....................... 1 - Textile Braid Hose (SAE 30R2) ........................................................................................1.26LOL+..................... 1 - Textile Braid Hose (Lock-On)...........................................................................................1.27LOC....................... 1 - Textile Braid Hose (Textile Cover Lock-On)....................................................................1.27
1.2 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
ContentsPart No. ................ Description ........................................................................................................................Page
RefrigerantPolar Seal............... 1 - Braid Hose (R134a, R12 and R22 Refrigerants)............................................................... 1.28
IndustrialPowerclean ............ 1 - Braid Hose PowerClean™ Pressure Washer Hose ........................................................... 1.28
MarineC5M....................... 1 - Wire Braid (SAE J1527Type A, Class 1, SAE J1952) ..................................................... 1.29
Fuel LineC5D ....................... 1 - Wire Braid (SAE J1402 and SAE J1019) ......................................................................... 1.29Safety Stripe II ...... Reinforced Nitrile Rubber (SAE 30R6 & SAE 30R7)........................................................... 1.304219....................... 1 - Textile Braid (SAE 30R6 & SAE 30R7) .......................................................................... 1.30
AutomotivePS-188 ................... Synthetic Rubber (SAE J2050 Type 1) Power Steering Hose ............................................... 1.312700*..................... Type P (EPDM) (SAE J1037, SAE J942b) Windshield Washer Hose .................................. 1.31
Air and Multi-PurposeTerminator............. 1 - Textile Braid (MSHA 30 CFR 18.65) Flame Resistant Air & Multipurpose Hose.......... 1.32Premo Flex ............ 1 - Textile Braid Air & Multipurpose Hose ........................................................................... 1.32
Stainless SteelAFX....................... 1 or 2 Braid Hose (Stainless Steel Braided Teflon Hose) ...................................................... 1.33
Fire SuppressionRFS........................ 1 - Wire Braid (SAE 100R Type S) Flame Resistant Fire Suppressant Hose ....................... 1.33
Hose AccessoriesHSG....................... Wire Spring Guard ................................................................................................................. 1.34AB00* ................... Hose Straps & Bunch Binders................................................................................................ 1.34HPSG..................... Flat Plastic Guard ................................................................................................................... 1.35SGX....................... Flat Plastic SpiralGuard™...................................................................................................... 1.35HNG ...................... Nylon Protective Sleeve ......................................................................................................... 1.36LIFEGUARD ........ Nylon Protective Hose Burst Sleeve Flame Resistant............................................................ 1.36TEXSLEEVE ........ Nylon Protective Hose Burst Sleeve Flame Resistant............................................................ 1.37HBR....................... Bend Restrictor....................................................................................................................... 1.37HTG....................... HeatGuard Silicon Fire Jacket................................................................................................ 1.38
Due to continual product improvement., we reserve the right to alter specifications without notice 1.3
Section 1Hydraulic Hose
GATES EFG6KEXTREMELY HIGH PRESSURE4 & 6 SPIRAL WIRE HOSE(S.A.E. 100R15)Recommended For: Extremely high pressure, high impulse applications such as hydrostatic transmissions. EFG6K is designed to meet all requirements of SAE 100R15 specifications and performance requirements of EN 856 4SP (-6, -8, -10 and -12) and EN 856 4SH (-12, -16, -20 and -24)Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standardpetroleum-based fluids.Revolutionary Design: Makes designing and plumbing of extremely high pressure hydraulic systems easy and efficient. 5/8” to 1 1/2” sizes are available in 36m and 60m continuous lengths. Tube:(EFG6K) Black, oil resistant, synthetic rubber. (Nitrile - Type C). 24G6K neoprene-typeAReinforcement: Four (six for -20 and -24) alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene- Type A). Blue stripe with gold print layline. Available with unique abrasion-resistant MegaTuff® coverTemperature Range: -40°F to +250°F (-40°C to +121°C). Couplings: Global-Crimp series.
GATES EFG6K-MTFEXTREMELY HIGH PRESSUREMEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Length Couplings
Carton BulkGlobal-Crimp
Non-SkiveGlobal-Crimp
Non-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m m One Piece Stem
SeriesFerrule Part No
6EFG6K 3/8 0.80 6000 414 24000 1655 64 30 - - 6GS 6GS1F-48EFG6K 1/2 0.95 6000 414 24000 1655 89 30 - - 8GS 8GS1F-4
10EFG6K 5/8 1.09 6000 414 24000 1655 102 30 61 - 10GS 10GS1F-412EFG6K 3/4 1.24 6000 414 24000 1655 120 30 61 - 12GS 12GS1F-416EFG6K 1 1.53 6000 414 24000 1655 155 30 61 - 16GS 16GS1F-420EFG6K 1 1/4 1.97 6000 414 24000 1655 210 15 61 - 20GS 20GS1F-624EFG6K 1 1/2 2.26 6000 414 24000 1655 254 15 61 24GSH - -32EFG6K 2 2.80 6000 414 24000 1655 635 15 61 32GSH - -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRadius
Approx. Carton Length
Couplings
Global-CrimpNon-Skive
Global-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m One PieceStem
SeriesFerrule Part No
6EFG6K-MTF 3/8 0.80 6000 414 24000 1655 64 30 6GS 6GS1F-48EFG6K-MTF 1/2 0.95 6000 414 24000 1655 89 30 8GS 8GS1F-4
10EFG6K-MTF 5/8 1.09 6000 414 24000 1655 102 30 10GS 10GS1F-412EFG6K-MTF 3/4 1.24 6000 414 24000 1655 120 30 12GS 12GS1F-416EFG6K-MTF 1 1.53 6000 414 24000 1655 155 30 16GS 16GS1F-420EFG6K-MTF 1 1/4 1.97 6000 414 24000 1655 210 15 20GS 20GS1F-624EFG6K-MTF 1 1/2 2.26 6000 414 24000 1655 254 15 24GSH - -
1.4 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES EFG5KEXTREMELY HIGH PRESSURE4 & 6 SPIRAL WIRE HOSE(S.A.E. 100R13)Recommended For: Extremely high pressure hydraulic applications. EFG5K is designed to meet all requirements of SAE 100R13 specifications and performance requirements of EN 856 4SH (-16, -20, -24 and -32) and EN 856 4SP (-8, -10 and -12). and EN 856 R13. 1/2” to 2”sizes are available in 36m to 61m continuous lengths. Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as stan-dard petroleum-based fluids.Tube: Black, oil resistant, synthetic rubber. (Sizes 06 to 20 Nitrile - Type C, sizes 24 & 32 Neoprene - Type A). Reinforcement: Four (six for 20, -24 and -32) layers of alternated, spiraled, high tensile steel wireCover: Black, oil resistant synthetic rubber (Neoprene-Type A). Blue stripe with red print layline. Temperature Range: -40°F to +250°F (-40°C to +121°C). Couplings: Global-Crimp series.
GATES EFG5K-MTF EXTREMELY HIGH PRESSUREMEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Length Couplings
Carton BulkGlobal-Crimp
Non SkiveGlobal-Crimp
Non-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m m One PieceStem
SeriesFerrule Part No
6EFG5K 3/8 0.80 5000 345 20000 1379 64 30 - 6GS 6GS1F-48EFG5K 1/2 0.94 5000 345 20000 1379 89 30 61 - 8GS 8GS1F-4
10EFG5K 5/8 1.11 5000 345 20000 1379 102 30 61 - 10GS 10GS1F-412EFG5K 3/4 1.26 5000 345 20000 1379 120 30 61 - 12GS 12GS1F-416EFG5K 1 1.53 5000 345 20000 1379 155 30 61 - 16GS 16GS1F-420EFG5K 1 1/4 1.97 5000 345 20000 1379 210 15 61 - 20GS 20GS1F-624EFG5K 1 1/2 2.26 5000 345 20000 1379 254 15 61 24GSH32EFG5K 2 2.80 5000 345 20000 1379 635 15 61 32GSH - -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
LENGTH Couplings
Carton BulkGlobal-Crimp
Non-SkiveGlobal-Crimp
Non-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m One PieceStem
SeriesFerrule Part No
6EFG5K-MTF 3/8 0.80 5000 345 20000 1379 64 30 - 6GS 6GS1F-48EFG5K-MTF 1/2 0.94 5000 345 20000 1379 89 30 - 8GS 8GS1F-4
10EFG5K-MTF 5/8 1.11 5000 345 20000 1379 102 30 - 10GS 10GS1F-412EFG5K-MTF 3/4 1.26 5000 345 20000 1379 120 30 - 12GS 12GS1F-416EFG5K-MTF 1 1.53 5000 345 20000 1379 155 30 61 - 16GS 16GS1F-420EFG5K-MTF 1 1/4 1.97 5000 345 20000 1379 210 15 61 - 20GS 20GS1F-624EFG5K-MTF 1 1/2 2.26 5000 345 20000 1379 254 15 61 24GSH - -32EFG5K-MTF 2 2.80 5000 345 20000 1379 635 15 61 32GSH - -
Due to continual product improvement., we reserve the right to alter specifications without notice 1.5
Section 1Hydraulic Hose
GATES EFG4KEXTREMELY HIGH PRESSURE4 SPIRAL WIRE HOSE(S.A.E. 100R12)Recommended For: Extremely high pressure, high impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 4SP (-16). Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycole and vegetable oil as well as standardpetroleum based fluids. Available in 36 through 60 metre lengths.Tube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Four alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene Type A). Blue stripe with white print layline.Temperature Range: -40°F to +250°F (-40°C to +121°C).Couplings: Super-Crimp and Global-Crimp series.
GATES EFG4K-MTF EXTREMELY HIGH PRESSUREMEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Length Couplings
Carton BulkSuper-Crimp
Non-SkiveGlobal-Crimp
Non-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
Stem Series
Ferrule Part No
6EFG4K 3/8 0.80 4000 275 16000 1103 64 30 S FNS-06 6GS 6GS1F-48EFG4K 1/2 0.94 4000 275 16000 1103 89 30 61 S FNS-08 8GS 8GS1F-4
10EFG4K 5/8 1.09 4000 275 16000 1103 102 30 61 S FNS-10 10GS 10GS1F-412EFG4K 3/4 1.21 4000 275 16000 1103 122 30 61 S FNS-12 12GS 12GS1F-416EFG4K 1 1.50 4000 275 16000 1103 152 30 61 S FNS-16 16GS 16GS1F-420EFG4K 1 1/4 1.85 4000 275 16000 1103 210 15 61 S FNS-20 20GS 20GS1F-4
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Length Couplings
Carton BulkSuper-Crimp
Non-SkiveGlobal-Crimp
Non-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
Stem Series
Ferrule Part No
6EFG4K-MTF 3/8 0.80 4000 275 16000 1103 64 30 S FNS-06 6GS 6GS1F-48EFG4K-MTF 1/2 0.94 4000 275 16000 1103 89 30 S FNS-08 8GS 8GS1F-4
10EFG4K-MTF 5/8 1.09 4000 275 16000 1103 102 30 S FNS-10 10GS 10GS1F-412EFG4K-MTF 3/4 1.21 4000 275 16000 1103 122 30 61 S FNS-12 12GS 12GS1F-416EFG4K-MTF 1 1.50 4000 275 16000 1103 152 30 61 S FNS-16 16GS 16GS1F-420EFG4K-MTF 1 1/4 1.85 4000 275 16000 1103 210 15 61 S FNS-20 20GS 20GS1F-4
1.6 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES EFG3KEXTREMELY HIGH PRESSURE4 SPIRAL WIRE HOSE(S.A.E. 100R12)Recommended For: Extremely high pressure, high impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 4SP. Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycole and vegetable oil as well as stan-dard petroleum based fluids. Available in 36 through 60 metre lengths.Tube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Four alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene Type A). Blue stripe with white print layline.Temperature Range: -40°F to +250°F (-40°C to +121°C).Couplings: Global-Crimp and GSP Series.
GATES EFG3K-MTF EXTREMELY HIGH PRESSUREMEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Lengths Couplings
Carton BulkGlobal-Crimp
Non-SkiveGSP Series
Non-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
Stem Series
Ferrule Part No
20EFG3K 1-1/4 1.85 3000 207 12000 828 210 15 61 20GS 20GS1F-4 - -24EFG3K 1-1/2 2.11 3000 207 12000 828 254 15 61 - - 24GSP 24GSP1F-432EFG3K 2 2.63 3000 207 12000 828 635 15 61 - - 32GSP 32GSP1F-4
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Length Couplings
Carton BulkGlobal-Crimp
Non-SkiveGSP Series
Non-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
Stem Series
FerrulePart No
20EFG3K-MTF 1-1/4 1.85 3000 207 12000 828 210 15 61 20GS 20GS1F-4 - -24EFG3K-MTF 1-1/2 2.11 3000 207 12000 828 254 15 61 - - 24GSP 24GSP1F-432EFG3K-MTF 2 2.63 3000 207 12000 828 635 15 61 - - 32GSP 32GSP1F-4
Due to continual product improvement., we reserve the right to alter specifications without notice 1.7
Section 1Hydraulic Hose
GATES M5K Mega5000®
HIGH PRESSURERecommended For: High pressure hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.Meets flame resistance acceptance designation “MSHA 2G”
Tube: Black, oil-resistant, synthetic rubber. (Nitrile-Type C).Reinforcement: Two braids of high-tensile steel wire.Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile-Type C2)Temperature Range:-40°F to +212°F (-40°C to +100°C).Couplings: Gates Mega-Crimp series.
XTRATUFF® SPECIFICATIONSHose lasts up to 25times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
MEGATUFF® SPECIFICATIONSHose lasts up to 300times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m One Piece Series
4M5K 1/4 0.54 5000 345 20000 1379 51 134 4G-6M5K 3/8 0.69 5000 345 20000 1379 64 100 6G-8M5K 1/2 0.86 5000 345 20000 1379 89 67 8G-
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m One Piece Series
4M5K-XTF 1/4 0.54 5000 345 20000 1379 51 134 4G-6M5K-XTF 3/8 0.69 5000 345 20000 1379 64 100 6G-8M5K-XTF 1/2 0.86 5000 345 20000 1379 89 67 8G-
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m One Piece Series
4M5K-MTF 1/4 0.54 5000 345 20000 1379 51 134 4G-6M5K-MTF 3/8 0.69 5000 345 20000 1379 64 100 6G-8M5K-MTF 1/2 0.86 5000 345 20000 1379 89 67 8G-
1.8 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES M4K Mega4000®
HIGH PRESSURE (exceeds SAE 100R19 & ISO11237 R19)Recommended For: High pressure hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.Meets flame resistance acceptance designation “MSHA 2G”Tube: Black, oil-resistant, synthetic rubber (Nitrile- Type C). Reinforcement: Two braids of high tensile steel wire.Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile- Type C2). Available with unique abrasion resistant Megatuff® cover.Temperature Range: -40°F to +212°F (-40°C to +100°C).Couplings: Super-Crimp, Global-Crimp and Mega-Crimp series.
EXTRATUFF® SPECIFICATIONSHose lasts up to 25 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
MEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Global-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
StemSeries
FerrulePart No
4M4K 1/4 0.54 4000 276 16000 1103 38 134 S FN4P-04 - -6M4K 3/8 0.69 4000 276 16000 1103 51 100 S FN4P-06 - -8M4K 1/2 0.86 4000 276 16000 1103 71 67 S FNP-08 - -
10M4K 5/8 0.98 4000 276 16000 1103 76 67 S FNP-10 - -12M4K 3/4 1.14 4000 276 16000 1103 97 67 S FNS-12 - -16M4K 1 1.52 4000 276 16000 1103 114 50 - - GS 16GS1F-4
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Global-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
StemSeries
FerrulePart No
4M4K -XTF 1/4 0.54 4000 276 16000 1103 38 134 S FN4P-04 - -6M4K -XTF 3/8 0.69 4000 276 16000 1103 51 100 S FN4P-06 - -8M4K -XTF 1/2 0.86 4000 276 16000 1103 71 67 S FNP-08 - -10M4K-XTF 5/8 0.98 4000 276 16000 1103 76 67 S FNP-10 - -12M4K-XTF 3/4 1.14 4000 276 16000 1103 97 67 S FNS-12 - -16M4K-XTF 1 1.52 4000 276 16000 1103 114 50 - - GS 16GS1F-4
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Global-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
StemSeries
FerrulePart No
4M4K -MTF 1/4 0.54 4000 276 16000 1103 38 134 S FN4P-04 - -6M4K -MTF 3/8 0.69 4000 276 16000 1103 51 100 S FN4P-06 - -8M4K -MTF 1/2 0.86 4000 276 16000 1103 71 67 S FNP-08 - -10M4K-MTF 5/8 0.98 4000 276 16000 1103 76 67 S FNP-10 - -12M4K -MTF 3/4 1.14 4000 276 16000 1103 97 57 S FNS-12 - -16M4K -MTF 1 1.52 4000 276 16000 1103 114 50 - - GS 16GS1F-4
Due to continual product improvement., we reserve the right to alter specifications without notice 1.9
Section 1Hydraulic Hose
GATES M3K Mega3000®
HIGH PRESSURE (exceeds SAE 100R17 & ISO11237 R17)225 bar 3250 psi Recommended For: High pressure hydraulic oil lines. M3K hose has smaller exterior dimensions and significantly tighter bend radius than other SAE 100R1 and 100R2 hose. Meets flame resistance acceptance designation “MSHA 2G”Tube: Black, oil-resistant, synthetic rubber (Nitrile-Type C). Reinforcement: Braided high tensile steel wire. -4, -6 and -8 sizes are one braid; -10, -12 and -16 sizes are two-braid.Cover: Black, oil, abrasion and weather resistant, synthetic rubber. (Modified Nitrile-Type C2). Temperature Range: -40°F to +212°F (-40°C to +100°C)Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.
EXTRATUFF® SPECIFICATIONSHose lasts up to 25 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
MEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrule Part
NoOne Piece
Series
4M3K 1/4 0.47 3250 225 13000 897 38.1 134 S FN3P-04 E6M3K 3/8 0.62 3250 225 13000 897 50.8 100 S FN3P-06 E8M3K 1/2 0.78 3250 225 13000 897 71.1 67 S FN3P-08 E
10M3K 5/8 0.98 3250 225 13000 897 76.2 67 S FNP-10 -12M3K 3/4 1.14 3250 225 13000 897 96.5 67 S FNP-12 E16M3K 1 1.48 3250 225 13000 897 114.3 50 S FNS-16 -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrule Part
NoOne Piece
Series
4M3K-XTF 1/4 0.47 3250 225 13000 897 38.1 134 S FN3P-04 E6M3K-XTF 3/8 0.62 3250 225 13000 897 50.8 100 S FN3P-06 E8M3K-XTF 1/2 0.78 3250 225 13000 897 71.1 67 S FN3P-08 E
10M3K-XTF 5/8 0.98 3250 225 13000 897 76.2 67 S FNP-10 -12M3K-XTF 3/4 1.14 3250 225 13000 897 96.5 67 S FNP-12 E16M3K-XTF 1 1.56 3250 225 13000 897 114.3 50 S FNS-16 -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrule Part
NoOne Piece
Series
4M3K-MTF 1/4 0.47 3250 225 13000 897 38.1 134 S FN3P-04 E6M3K-MTF 3/8 0.62 3250 225 13000 897 50.8 100 S FN3P-06 E8M3K-MTF 1/2 0.78 3250 225 13000 897 71.1 67 S FN3P-08 E
10M3K-MTF 5/8 0.98 3250 225 13000 897 76.2 67 S FNP-10 -12M3K-MTF 3/4 1.14 3250 225 13000 897 96.5 67 S FNP-12 E16M3K-MTF 1 1.56 3250 225 13000 897 114.3 50 S FNS-16 -
1.10 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES M2T MegaFlex®
HIGH PRESSURE (SAE 100R16)EXTRA FLEXIBLERecommended For: High pressure hydraulic oil lines. Exceeds SAE 100R16 requirements and meets or exceeds EN 853 2SN. M2T hose has smaller exterior dimensions and significantly tighter bend radius.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber. (Nitrile- Type C). Reinforcement: Two braids, of high-tensile steel wire. Cover: Black, oil, abrasion and weather resistant, synthetic rubber. (Modified Nitrile-Type C2). Green stripe layline.Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.
EXTRATUFF® SPECIFICATIONSHose lasts up to 25 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
MEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrule Part
NoOne Piece
Series
4M2T 1/4 0.54 6000 414 24000 1655 38 167 S FNP-03 E6M2T 3/8 0.69 5000 345 20000 1379 50 117 S FNM2P-06 E8M2T 1/2 0.81 4300 297 17200 1186 70 100 S FNM2P-08 E
10M2T 5/8 0.95 3800 262 15200 1048 75 67 S FNM2P-10 -12M2T 3/4 1.10 3500 241 14000 966 95 67 S FNM2P-12 E16M2T 1 1.38 2500 172 10000 690 114 50 S FNM2P-16 -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrule Part
NoOne Piece Series
4M2T-XTF 1/4 0.54 6000 414 24000 1655 38 167 S FNP-03 E6M2T-XTF 3/8 0.69 5000 345 20000 1379 50 117 S FNM2P-06 E8M2T-XTF 1/2 0.81 4300 297 17200 1186 70 117 S FNM2P-08 E
10M2T -XTF 5/8 0.95 3800 262 15200 1048 75 67 S FNM2P-10 -12M2T -XTF 3/4 1.10 3500 241 14000 966 95 67 S FNM2P-12 E16M2T -XTF 1 1.38 2500 172 10000 690 114 50 S FNM2P-16 -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrule Part
NoOne Piece Series
4M2T-MTF 1/4 0.54 6000 414 24000 1655 38 167 S FNP-03 E6M2T-MTF 3/8 0.69 5000 345 20000 1379 50 117 S FNM2P-06 E8M2T-MTF 1/2 0.81 4300 297 17200 1186 70 117 S FNM2P-08 E
10M2T -MTF 5/8 0.95 3800 262 15200 1048 75 67 S FNM2P-10 -12M2T -MTF 3/4 1.10 3500 241 14000 966 95 67 S FNM2P-12 E16M2T -MTF 1 1.38 2500 172 10000 690 114 50 S FNM2P-16 -
Due to continual product improvement., we reserve the right to alter specifications without notice 1.11
Section 1Hydraulic Hose
GATES CM2T MegaFlex® TWIN HOSEHIGH PRESSUREEXTRA FLEXIBLE(SAE 100R16)Recommended For: High pressure hydraulic oil lines such as forklift applications. Exceeds SAE100R16 requirements and meets or exceeds performance standards of EN 857 2SC and ISO/DIS 1436CM2T hose has a smaller exterior dimensions and significantly tighterbend radius.Meets flame resistance acceptance designation “MSHA 2GTube: Black oil resistant, synthetic rubber (Nitrile-Type C). Reinforcement: Two braids, of high-tensile steel wire. Cover: Black oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile - Type C2)Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mmStem
SeriesFerrule Part
NoOne Piece
Series
6CM2T 3/8 0.69 5000 345 20000 1379 50 S FNM2P-06 E8CM2T 1/2 0.81 4300 297 17200 1186 70 S FNM2P-08 E
1.12 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES G2 HIGH PRESSURE(SAE 100R2AT & SAE 100R2 Type S)Recommended For: High pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber. (Nitrile - Type C).Reinforcement: Two braids of high-tensile steel wire. Cover: Black, oil and abrasion resistant thin synthetic rubber (Modified Nitrile - Type C2).Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates MegaCrimp series couplings.
GATES G2XH 2Wire Braid Extreme Heat HoseHIGH PRESSURE (SAE 100R2AT)Recommended For: High-pressure hydraulics applications where pressure or temperature requirements exceed SAE 100R2AT or where resistence to either petroleum-base or phosphate ester fluids is required. Meets or exceeds the requirements of SAE 100R2 Type AT.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil and chemical resistant, synthetic rubber. (CPE)Reinforcement: Two braids of high-tensile steel wire. Cover: Blue, oil and abrasion resistant thin synthetic rubber (CSM) Flame Resistant U.S MSHA 2GTemperature Range: -40°F to +300°F (-40°C to +149°C).Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m mStem
SeriesFerrulePart No
One Piece Series
4G2 1/4 0.58 5800 400 23200 1600 102 102 167 S FNP-04 E5G2 5/16 0.64 5000 350 20000 1400 110 167 S FNP-05 -6G2 3/8 0.73 4800 330 19200 1320 127 91 122 S FNP-06 E8G2 1/2 0.86 4000 275 16000 1100 178 84 100 S FNP-08 E
10G2 5/8 0.98 3625 250 14500 1000 203 61 67 S FNP-10 -12G2 3/4 1.14 3100 215 12400 855 241 53 67 S FNP-12 E16G2 1 1.48 2400 165 9600 660 305 30 50 S FNP-16 -20G2 1 1/4 1.87 1825 125 7300 500 419 30 - S FNP-20 -24G2 1 1/2 2.15 1300 90 5000 345 508 30 - S FNP-24 -32G2 2 2.65 1175 81 4500 310 635 30 - S FNP-32 -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m m Stem SeriesFerrulePart No
One Piece Series
4G2XH 1/4 0.58 6000 414 23200 1600 102 102 167 S FNP-04 E6G2XH 3/8 0.73 5000 345 19200 1320 127 91 122 S FNP-06 E8G2XH 1/2 0.86 4250 293 16000 1100 178 84 100 S FNP-08 E
10G2XH 5/8 0.98 3625 250 14500 1000 203 61 67 S FNP-10 -12G2XH 3/4 1.14 3100 215 12400 855 241 53 67 S FNP-12 E16G2XH 1 1.48 2500 172 9600 660 305 30 50 S FNP-16 -20G2XH 1-1/4 1.87 2250 155 9000 620 419 36 - S FNP-20
Due to continual product improvement., we reserve the right to alter specifications without notice 1.13
Section 1Hydraulic Hose
GATES G2H 2 WIRE BRAID HOSENON-SKIVE HIGH TEMPERATURE(SAE 100R2AT) Recommended For: High pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and performance requirements of EN 853.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber (Nitrile - Type C). Reinforcement: Two braids of high-tensile steel wire. Cover: Black, oil resistant, synthetic rubber. (Hypalon® - Type M). Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent- up to 10% ofoperating time.Couplings: Super-Crimp series.
Hypalon is a registered trademark of DuPont
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
20G2H 1 1/4 1.87 1650 114 6600 455 419 30 S FNP-2024G2H 1 1/2 2.15 1300 89 5000 344 508 30 S FNP-2432G2H 2 2.65 1175 81 4500 310 635 30 S FNP-32
1.14 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES J2ATJACKLINE HOSEHIGH PRESSURE2 WIRE BRAIDMHI - IJ100Recommended For: Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Two braids of high tensile steel wire. Cover: Black, oil and abrasion resistant synthetic rubber. (Modified Nitrile - Type C2)Temperature Range: -40°F to +120°F (-40°C to +49°C). Couplings: Super-Crimp and Ezi-Crimp series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m Stem SeriesFerrule Part
NoOne Piece
Series
4J2AT 1/4 0.58 10000 689 20000 1862 102 106 S FNP-04 E6J2AT 3/8 0.74 10000 689 20000 1862 127 100 S FNP-06 E
Due to continual product improvement., we reserve the right to alter specifications without notice 1.15
Section 1Hydraulic Hose
GATES G1 MEDIUM PRESSURE(SAE 100R1 AT) Recommended For: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R1 Type AT and SAE 100R1 Type S and performance requirements of EN 853 1SN.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber (Nitrile - Type C).Reinforcement: One braid of high-tensile steel wire. Cover: Black, oil and abrasion-resistant, synthetic rubber. (Modified Nitrile - Type C2).Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.
GATES G1H MEDIUM PRESSUREHIGH TEMPERATURESAE 100R1 ATRecommended For: Medium pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R1 Type AT. Tube: Black, oil-resistant, synthetic rubber (Nitrile - Type C).Reinforcement: One braid of high-tensile steel wire. Cover: Black, oil and abrasion-resistant, synthetic rubber. (Modified Nitrile - Type C2).Temperature Range: -40°F to +275°F (-40°C to +135°C).Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m mStem
SeriesFerrulePart No
One Piece Series
3G1 3/16 0.47 3625 250 14500 1000 89 243 134 S FNP-03 -4G1 1/4 0.53 3275 225 13100 900 102 213 134 S FNP-04 E5G1 5/16 0.59 3125 215 12500 850 114 167 168 S FNP-05 -6G1 3/8 0.69 2600 180 10400 720 127 145 117 S FNP-06 E8G1 1/2 0.82 2325 160 9300 640 178 122 100 S FNP-08 E
10G1 5/8 0.94 1900 130 7600 520 203 91 67 S FNP-10 -12G1 3/4 1.10 1525 105 6100 420 241 61 67 S FNP-12 E16G1 1 1.41 1275 88 5100 352 305 30 50 S FNP-16 -20G1 1 1/4 1.71 925 63 3700 252 406 30 - S FNP-20 -24G1 1 1/2 1.96 725 50 2900 200 508 30 - S FNP-24 -32G1 2 2.52 600 41 2700 186 635 30 - S FNP-32 -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Ezi-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m mStem
SeriesFerrulePart No
One Piece Series
4G1H 1/4 0.53 2750 190 11000 759 102 213 134 S FNP-04 E6G1H 3/8 0.69 2250 155 9000 621 127 145 117 S FNP-06 E8G1H 1/2 0.82 2000 138 8000 552 178 122 100 S FNP-08 E
10G1H 5/8 0.94 1500 103 6000 414 203 91 67 S FNP-10 -12G1H 3/4 1.10 1250 86 5000 345 241 61 67 S FNP-12 E16G1H 1 1.41 1000 69 4000 276 305 30 50 S FNP-16 -20G1H 1 1/4 1.71 925 63 3700 252 406 30 - S FNP-20 -24G1H 1 1/2 1.96 725 50 2900 200 508 30 - S FNP-24 -32G1H 2 2.52 600 41 2400 166 635 30 - S FNP-32 -
1.16 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES MegaTech 1000 (ACR) MEDIUM PRESSUREHIGH TEMPERATURESAE J1402, SAE J1019 & DOT FMVSS 106-74Recommended For: Air brake, pressurised hot oil return lines and rotary oil/air compressor lines. Meets the requirements of DOT FMVSS 106-74, SAE J1402, SAE J1019 performance specifications for high-temperature transmission and lubricating oil systems using petroleum-based oils.Tube: True-bore GTS black tube, specifically compounded for temperature and chemical resistance (CPE - Type J)*Reinforcement: One braid of high-tensile steel wire. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber.Temperature Range: Petroleum-base fluids -40°F to +300°F (-40°C to +149°C). Phosphate ester fluids as recommended by the fluid manufacturer, but within a range of -40°F to +212°F (-40°C to +100°C).Couplings: Super-Crimp and Gates Mega-Crimp series.
GATES MegaTech II (ACP) MEDIUM PRESSUREHIGH TEMPERATURESAE 100R2AT & SAE 100R2 Type SRecommended For: Multipurpose medium-pressure, high-temperature, air compressor lines, petroleum-base or phosphate ester hydraulic fluid supplies. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S. Tube: Black, oil-resistant, synthetic rubber (CPE - Type J).Reinforcement: Two braids of high-tensile steel wire. Cover: Blue, oil and abrasion-resistant polyester braid.Temperature Range: -40°F to +300°F (-40°C to +149°C).Couplings: Super-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
One Piece Series
4MegaTech1000 1/4 0.52 1000 69 4000 276 51 107 S FSP-204 4G-6MegaTech1000 3/8 0.66 1000 69 4000 276 64 107 S FSP-206A 6G-8MegaTech1000 1/2 0.80 1000 69 4000 276 89 107 S FNP-08 8G-
10MegaTech1000 5/8 0.93 1000 69 4000 276 102 91 S FNP-10 10G-12MegaTech1000 3/4 1.04 1000 69 4000 276 122 61 S FNP-12 12G-16MegaTech1000 1 1.34 1000 69 4000 276 152 46 S FNP-16 16G-20MegaTech1000 1-1/4 1.58 1000 69 4000 276 216 31 S FNP-20 20G-
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min.BendRad.
Approx. Reel
Length
Couplings
Super-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrulePart No
20Megatech II 1-1/4 1.89 1700 117 6800 469 381 31 S FNP-2024Megatech II 1-1/2 2.13 1500 103 6000 413 508 31 S FNP-2432Megatech II 2 2.61 1300 89 5200 358 635 31 S FNP-32
Due to continual product improvement., we reserve the right to alter specifications without notice 1.17
Section 1Hydraulic Hose
GATES Megatech500High-Temp Oil/Return
Recommended For: Air Brake, pressurized hot oil return lines and rotary oil/air compressor lines. Meets the requirements of DOT SAE J1019 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Not recommended for petrol or diesel applications.Tube: GTS* black tube, specificallycompounded for temperature and chemical resistance (CPE -Type J)Reinforcement: One braid of high-tensile steel wire.Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubberTemperate Range: Petroleum-base fluids -40°F to +300°F(-40°C to + 149°C). Phosphate ester fluids reccommended by the fluid manufacturer, but within range of -40°F 70 + 212°F (-40°C to + 100°C)Couplings: GL Series
GATES C5CFLEET APPLICATIONPOLYESTER BRAID COVERSAE 100R5 & SAE J1402 Type AIIRecommended For: Medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications. DOT FMVSS 106-74 Type - All and SAE J1402 Type All for air brake applications (-4 and-12). Not recommended for gasoline or diesel fuel.Tube: -4 and -5: black, oil and heat resistant synthetic rubber (Neoprene Type A). -6 thru -40 (Nitrile - Type C)Reinforcement: One braid of high tensile carbon steel wire over one braid of polyester. Cover: Black, oil and mildew resistant, polyester braid. Temperature Range: Under SAE 100R5 (hydraulic) conditions -40°F to +212°F (-40°C to +100°C). All-purpose fleet application (hot lube oil lines) -40°F to +300°F (-40°C to +149°C). Air to +160°F (+71°C) only. For water emulsions etc. Avoid continuous use at maximum temperature concurrent with maximum working pressure.Couplings: Super-Crimp and C5 Field-Fit series.
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min.BendRad.
Approx. Reel
LengthCouplings
I.D.in.
O.D.in.
psi bar psi bar mm m GL Series
24Megatech500 1-1/2 1.95 500 34 2000 138 381 31 24GL-32Megatech500 2 2.48 500 34 2000 138 457 31 32GL-40Megatech500 2-1/2 2.97 500 34 2000 138 559 31 40GL-48Megatech500 3 3.5 500 34 2000 138 609 31 48GL-
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Approx Reel
Length
Couplings
Super-CrimpNon-Skive
Field-Fit/C5Field Attachable
I.D.in.
O.D.in.
psi bar psi bar mm m mStem
SeriesFerrulePart No
CompleteCoupling Series
4C5C 3/16 0.52 3000 207 12000 828 76 - 134 S FSP-204 4C5-5C5C 1/4 0.58 3000 207 12000 828 86 - 117 S FSP-204 5C5-6C5C 5/16 0.67 2250 155 9000 621 102 - 117 S FSP-206A 6C5-8C5C 13/32 0.77 2000 138 8000 552 117 - 100 S FNP-06 8C5-
10C5C 1/2 0.92 1750 121 7000 483 140 - 83 S FSP-210 10C5-12C5C 5/8 1.08 1500 103 6000 414 165 - 67 S FNP-12 12C5-16C5C 7/8 1.23 800 55 3200 221 188 - 50 - - 16C5-20C5C 1 1/8 1.50 625 43 2500 172 229 30 - - - 20C5-24C5C 1 3/8 1.75 500 35 2000 138 267 30 - - - 24C5-32C5C 1 13/16 2.22 350 24 1400 97 338 30 - - - 32C5-40C5C 2 3/8 2.88 350 24 1400 97 610 30 - - - -
1.18 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES C5EFLEET APPLICATIONPOLYESTER BRAID COVERSAE J1019 & SAE J1402 Type AI (-4 to -12)Recommended For: Air brake hose, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), fuel filter, engine and transmission coolant lines, and hot (+300°F) lube oil lines. Tube: Black, oil and heat resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire over one braid of polyester. Cover: Black, oil and heat resistant, textile braid impregnated with synthetic rubber. Green stripe for easy identification. Temperature Range: -40°F to +300°F (-40°C to +149°C). Air +250°F (+121°C) maximum only.Couplings: Super-Crimp and Field-Fit C5E series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx Carton Length
Approx Reel
Length
Couplings
Super-CrimpNon-Skive
Field-Fit/C5EField Attachable
I.D.in.
O.D.in.
psi bar psi bar mm m mStem
SeriesFerrulePart No
Complete Coupling Series
4C5E 3/16 0.49 1500 103 6000 414 20 122 134 - - 4C5E-5C5E 1/4 0.55 1500 103 6000 414 25 106 117 S FSP-204 5C5E-6C5E 5/16 0.61 1500 103 6000 414 33 68 117 S FNP-05 6C5E-8C5E 13/32 0.73 1250 86 5000 345 46 145 100 S FNP-06 8C5E-
10C5E 1/2 0.83 1250 86 5000 345 58 100 83 S FSP-208 10C5E-12C5E 5/8 0.95 750 52 3000 207 71 61 67 S FNP-10 12C5E-16C5E 7/8 1.20 400 28 1600 110 89 83 50 - - 16C5E-20C5E 1 1/8 1.49 300 21 1250 86 114 30 - - - 20C5E-
Due to continual product improvement., we reserve the right to alter specifications without notice 1.19
Section 1Hydraulic Hose
GATES G3H MEDIUM PRESSURESAE-100R3 Recommended For: Hydraulic oil lines, anti-freeze solutions or water. Meets or exceeds requirements of SAE 100R3. Tube: Black, synthetic rubber (Nitrile - Type C). Reinforcement: Two fibre braids. Cover: Black, oil and abrasion resistant, synthetic rubber (Neoprene - Type A).Temperature Range: For hydraulic oil lines -40°F to 275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time). Couplings: Super-Crimp series.
SPECIFICATIONS
Part No.
Hose Size VacuumWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Super-CrimpSkive
I.D.in.
O.D.in.
Ins. Hg psi bar psi bar mm mSkive
LengthSkive
DiameterStem
SeriesFerrule Part No
4G3H 1/4 0.56 28 1250 86 5000 345 76 139 19mm 13.7mm S FSP-2046G3H 3/8 0.75 28 1125 78 4500 310 102 91 19mm 17.5mm S FSP-206A8G3H 1/2 0.94 28 1000 69 4000 276 127 68 22mm 22.8mm S FSP-210
12G3H 3/4 1.25 28 750 52 3000 207 152 49 40mm 30.5mm S FSP-41216G3H 1 1.50 20 565 39 2250 155 203 30 38mm 36.8mm S FSP-21620C3H 1 1/4 1.75 15 375 26 1500 103 254 24 Non-Skive Non-Skive S FSP-220
1.20 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES TH8 THERMOPLASTICSAE 100R8Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction equipment. TH8 hoses meet or exceed performance requirements of SAE 100R8 with significantly tighter bend radius. Multiline available.Tube: 100% seamless Nylon Type Z. Easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol.Reinforcement: Two polyester braids. Cover: Black urethane resists hydraulic fluids, high temperatures, aging and weather. Black cover is perforated for use in general hydraulic and pneumatic service.Temperature Range: -65°F to +200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of 158°F (+70°C) for water, water/oil emulsions and water glycol.Couplings: Gates Mega-Crimp series.
GATES TH8NC THERMOPLASTIC - NON-CONDUCTIVESAE 100R8Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction equipment. TH8 hoses meet or exceed performance requirements of SAE 100R8 with significantly tighter bend radius. Multilineavailable.Tube: 100% seamless Nylon Type Z. Easily handles a broad range of hydraulic fluids, including phosphate esters andwater glycol.Reinforcement: Two polyester braids. Cover: Orange urethane resists hydraulic fluids, high temperatures, aging and weather. Orange cover is non-perforat-ed for applications requiring electrical non-conductivity. Meets SAE 100R8 Electrical Conductivity test.Temperature Range: -65°F to +200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maxi-mum of 158°F (+70°C) for water, water/oil emulsions and water glycol.Couplings: Gates Mega-Crimp series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m One Piece Series
4TH8 1/4 0.63 5000 345 20000 1379 51 76 4G-6TH8 3/8 0.77 4000 276 16000 1103 64 76 6G-8TH8 1/2 0.89 3500 241 14000 966 102 76 8G-
12TH8 3/4 1.14 2250 155 9000 621 165 61 12G-
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m One Piece Series
4TH8NC 1/4 0.63 5000 345 20000 1379 51 76 4G-6TH8NC 3/8 0.77 4000 276 16000 1103 64 76 6G-8TH8NC 1/2 0.89 3500 241 14000 966 102 76 8G-
Due to continual product improvement., we reserve the right to alter specifications without notice 1.21
Section 1Hydraulic Hose
GATES TH7 THERMOPLASTICSAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7 hose meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius.Tube: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol.Reinforcement: Synthetic Fibre.Cover: Black polyurethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7 is perforated for use in general hydraulic and pneumatic service.Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp series and Gates Mega-Crimp series.
SPECIFICATIONS(Black cover)
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRadius
Approx. Carton Length
Couplings
Super-CrimpNon-Skive
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m Stem SeriesFerrule Part
No.One Piece
Series
2TH7 1/8 0.34 3000 172 12000 690 13 76 - - 2PCTS3TH7 3/16 0.43 3000 207 12000 828 20 76 - - 3PCTS4TH7 1/4 0.51 2750 190 11000 759 33 76 S FSP-204 4G-5TH7 5/16 0.60 2500 172 10000 690 46 76 - - 5G-6TH7 3/8 0.66 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-
12TH7 3/4 1.07 1250 86 5000 345 127 76 - - 12G-16TH7 1 1.47 1000 69 4000 276 254 76 - - 16G-
1.22 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES TH7NC THERMOPLASTIC - NON-CONDUCTIVESAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. Orange colour TH7NC meets SAE 100R7 non-conductivity requirements. TH7NC hose meets or exceeds performance requirements of SAE 100R7 with significant tighter bend radius.Tube: -2, -12 and -16: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. -3 through -8 Polyester.Reinforcement: Synthetic fibre.Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NC is non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kV/Ft for five minutes.Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS(Orange Cover)
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. Bend
Radius
Approx. Carton Length
Couplings
Super CrimpNon-Skive
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m Stem SeriesFerrule Part
No.One Piece
Series
2TH7NC 1/8 0.32 2500 172 10000 690 13 76 - - 2PCTS3TH7NC 3/16 0.44 3000 207 12000 828 20 76 - - 3PCTS4TH7NC 1/4 0.51 2750 190 11000 759 33 76 S FSP-204 4G-6TH7NC 3/8 0.66 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7NC 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-
12TH7NC 3/4 1.07 1250 86 5000 345 127 61 12G-16TH7NC 1 1.47 1000 69 4000 276 254 61 - - 16G-
Due to continual product improvement., we reserve the right to alter specifications without notice 1.23
Section 1Hydraulic Hose
GATES TH7DL THERMOPLASTICSAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7DL hoses meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius.Tube: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol.Reinforcement: Synthetic fibre. Cover: Black urethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7DL is perfotated for use in general hydraulic and pneumatic service.Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS(Black cover)
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. Bend
Radius
Approx. Carton Length
Couplings
Super-CrimpNon-Skive
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm m Stem SeriesFerrule Part
No.One Piece
Series
4TH7DL 1/4 0.48 2750 190 11000 759 33 76 S FSP-204 4G-5TH7DL 5/16 0.60 2500 172 10000 690 46 76 - - 5G-6TH7DL 3/8 0.63 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7DL 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-
1.24 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES TH7NCDL THERMOPLASTICSAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. Orange colour TH7NCDL meets SAE 100R7 non-conductivity requirements. TH7NCDL hoses meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius.Tube: PolyesterReinforcement: Braided synthetic fibre. Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NCDL is non-perforated for applications requiring electrical non-conductivity-. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kV/Ft. for five minutes. (Orange is industry accepted colour for non-conductive hose.) Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS(Orange cover)
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Super CrimpNon-Skive
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mStem
SeriesFerrule Part No.
One Piece Series
4TH7NCDL 1/4 0.48 2750 190 11000 759 33 76 S FSP-204 4G-6TH7NCDL 3/8 0.63 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7NCDL 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-
Due to continual product improvement., we reserve the right to alter specifications without notice 1.25
Section 1Hydraulic Hose
GATES GMV MegaVac®
LOW PRESSURE(SAE 100R4)Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure return lines. Meets or exceeds requirements of SAE 100R4. Uses half the bend radius of SAE100R4.Meets flame resistance acceptance designation “MSHA 2GTube: Black, synthetic nitrile rubber is specifically designed for resistance to high temperatures. (Nitrile - Type C)Reinforcement: Double spiral textile (braid for -12 -16 -20) reinforced with a helical spiral-wire to prevent collapse. Cover: Black synthetic rubber is oil and abrasion resistant. (Neoprene - Type A)Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% ofoperating time). Couplings: Super-Crimp, Clamp-On, Gates Mega-Crimp and GL series.
HOZEFLEX
LOW PRESSUREOIL DELIVERY AND SUCTIONRecommended For: The transfer of oils and petroleum-based products with aromatic content below 50%. Also suitable on hydraulic systems such as hydraulic oil return lines.Tube: Black Nitrile RubberReinforcement: High tensile textile cords, steel wire helix.Cover: Black, oil and weather resistant chloroprene rubberTemperature Range: -20°C to +70°C). Couplings: Field-Fit Clamp-On series.
SPECIFICATIONS
Part No.
Hose SizeVacuu
mWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx Carton Length
Couplings
Super-Crimp
Vacu-Crimp
Clamp-OnNon-Skive
I.D.in.
O.D.in.
Ins. Hg psi bar psi bar mm m Ferrule One PieceSuper Clamp
Part No.T-Bolt Clamp
Part No.
12GMV 3/4 1.22 25 350 24 1,400 69 64 30 FSS-12 - SP21-34 323016GMV 1 1.45 25 300 20 1200 55 76 30 FSP-216 - SP34-37 323620GMV 1 1/4 1.76 25 250 17 1000 52 102 30 FSP-220 - SP43-47 324424GMV 1 1/2 2.01 25 162 11 650 45 127 30 FSP-424 - SP47-51 325032GMV 2 2.51 25 112 8 450 31 152 30 FSP-432 - SP63-68 326236GMV 2 1/4 2.76 25 88 6 350 24 178 30 - GL SP68-73 326840GMV 2 1/2 3.02 25 68 5 275 19 178 30 - GL SP73-79 327448GMV 3 3.51 25 62 4 250 17 229 30 - GL SP85-91 328656GMV 3 1/2 4.01 25 56 3.8 225 16 254 30 - GL SP97-104 329864GMV 4 4.51 25 56 3.8 225 16 305 30 - GL SP112-121 -
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Approx Carton Length
Couplings
Clamp-OnClamp Non-Skive
I.D.in.
O.D.in.
psi bar m Stem SeriesSuper Clamp
Part No.T-Bolt Clamp Part
No.
RS41-19 3/4 1.14 150 10 20 Clamp-On SP29-31 3229RS41-22 7/8 1.30 150 10 20 Clamp-On SP-31-34 3232RS41-25 1 1.38 150 10 20 Clamp-On SP34-37 3232RS41-32 1 1/4 1.65 150 10 20 Clamp-On SP40-43 3240RS41-38 1 1/2 1.93 150 10 20 Clamp-On SP47-51 3248RS41-51 2 2.44 150 10 20 Clamp-On SP59-63 3260RS41-64 2 1/2 2.99 150 10 20 Clamp-On SP73-79 3274RS41-76 3 3.50 150 10 20 Clamp-On SP85-91 3286
1.26 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES RLA LOW PRESSURE(SAE 30R2)Recommended For: Low-pressure hydraulics oil return lines for general purpose water, glycol antifreeze solutions, converying diesel fuel, gasoline or air. Meets 30R2 performance requirements for both Type 1 and Type 2.Tube: Black, synthetic rubber, oil resistant (Nitrile - Type C)Reinforcement: One fibre braid (-3 to -10). Spiral braid (-12 to -16)Cover: Black synthetic rubber. Oil and abrasion resistant. (Modified Nitrile - Type C)Temperature Range: -40°F to +212°F (-40°C to +100°C). Air to +160°F (+71°C) only.Couplings: Super-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS
Part No.
Hose Size VacuumWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx Carton Length
Couplings
Super CrimpNon-Skive
Mega-CrimpNon-Skive
I.D.in.
O.D.in.
Ins. Hg psi bar psi bar mm mStem
SeriesFerrulePart No
One Piece Series
3RLA 3/16 0.41 28 250 17 1000 39 76 168 P FSP-203 -4RLA 1/4 0.50 28 250 17 1000 39 76 168 S FSP-204 4G-5RLA 5/16 0.56 28 250 17 1000 39 102 168 P FSP-205 5G-6RLA 3/8 0.66 28 250 17 1000 39 102 168 S FSP-206A 6G-8RLA 1/2 0.81 20 200 14 800 55 127 168 S FSP-208 8G-
10RLA 5/8 0.94 15 200 14 800 55 152 168 S FSP-212 10G-12RLA 3/4 1.09 10 200 14 800 55 152 168 S FSP-412 12G-16RLA 1 1.34 10 160 6 640 44 203 91 S FSP-416 16G-
Due to continual product improvement., we reserve the right to alter specifications without notice 1.27
Section 1Hydraulic Hose
GATES LOL+LOW PRESSURERecommended For: Petroleum-base hydraulic oils, water, glycol antifreeze solutions, engine lubricating oils, and air. Lock-On hose and couplings are NOT recommended for pressure surge applications or critical applications such as permanent piping in residential or commercial buildings. Do not use for gasoline or diesel fuels, unless approved by Gates H/C Product Application.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant synthetic rubber highly resistant to oil and heat (Nitrile - Type C).Reinforcement: One fibre braid.Cover: Oil- and abrasion-resistant synthetic rubber (Modified Nitrile- Type C). Available in black-Neoprene (LOLA), blue (LOLB), green (LOLG), red (LOLR), yellow (LOLY) and grey (LOLC) colours.Temperature Range: -40°F to +212°F (-40°C to +100°C). For air: 160°F (+71°C) only.Couplings: Field-Fit Lock-On series.
GATES LOCLOW PRESSURERecommended For: Petroleum-base hydraulic oils, glycol anti-freeze compounds, water, hot lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications such as permanent piping in residential or commercial buildings. Tube: Black, oil-resistant synthetic rubber (Nitrile - Type C). Reinforcement: One fibre braid. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber. Temperature Range: -40°F to +212°F (-40°C to +100°C). For air: -40°F to +160°F (-40°C to +71°C). Couplings: Field-Fit Lock-On series
SPECIFICATIONS
Part No.
Hose Size VacuumWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Reel
Length
Couplings
Lock-OnNon-Skive
I.D.in.
O.D.in.
in. Hg psi bar psi bar mm mOne Piece
Series
3LOLA+ 3/16 0.41 28 300 21 1200 83 76 91 L4LOLA+ 1/4 0.47 28 300 21 1200 83 76 91 L5LOLA+ 5/16 0.55 28 300 21 1200 83 76 91 L6LOLA+ 3/8 0.63 28 300 21 1200 83 76 91 L6LOLB+ 3/8 0.63 28 300 21 1200 83 76 91 L6LOLR+ 3/8 0.63 28 300 21 1200 83 76 91 L6LOLY+ 3/8 0.63 28 300 21 1200 83 76 91 L8LOLA+ 1/2 0.77 28 300 21 1200 83 127 91 L8LOLB+ 1/2 0.77 28 300 21 1200 83 127 91 L
10LOLA+ 5/8 0.94 28 300 21 1200 83 152 75 L10LOLB+ 5/8 0.94 28 300 21 1200 83 152 75 L12LOLA+ 3/4 1.06 15 300 21 1200 83 178 68 L12LOLB+ 3/4 1.06 15 300 21 1200 83 178 68 L
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Lock-OnNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm mOne Piece
Series
4LOC 1/4 0.52 300 21 1000 69 76 175 L6LOC 3/8 0.64 300 21 1000 69 76 183 L8LOC 1/2 0.80 300 21 1000 69 127 102 L
10LOC 5/8 0.90 300 21 1000 69 152 79 L12LOC 3/4 1.00 300 21 1000 69 178 67 L
1.28 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES POLAR SEALSAE J51 Type D, SAE J2064 Type C, class IIRecommended For: Liquid and gaseous R134a and R12 refrigerants in automotive air conditioning and industrial systems; i.e., tractors construction trucks, mobile and stationary refrigeration units. Designed to minimize permeation of R134a refrigerant.Tube: Black synthetic rubber (Chloroprene- Type A).Barrier: Nylon liner.Reinforcement: Two layers of spiral polyester.Cover: Black synthetic rubber (EPDM).Temperature Range: -22°F to +257°F (-30°C to +125°C).Couplings: Gates PolarSeal series.
GATES POWER CLEAN ™1 & 2 WIRE BRAID HOSERecommended For: For use on hot or cold water, high pressure cleaning equipment NOTE: Not recommended for steam service.Tube: Synthetic rubber specifically compounded to handle high pressure water service.Reinforcement: High tensile steel 1 & 2 wire braid.Cover: Specifically compounded to handle high pressure washer environment.Temperature Range:-40°F to +250°F (-40°C to +121°C)Increased operating temperature will reduce hose assembly service life.Couplings: Super-Crimp and Gates Mega-Crimp series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
SuctionApprox. Carton Length
Couplings
Polar CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm in Hg m One Piece Series
6AC134A 5/16 .75 500 34 2000 138 51 24 103 6ACA-8AC134A 13/32 .91 500 34 2000 138 76 24 71 8ACA-
10AC134A 1/2 1.00 500 34 2000 138 102 24 64 10ACA-12AC134A 5/8 1.13 500 34 2000 138 127 24 53 12ACA-
SPECIFICATIONS
Part No.
Hose Size BraidingWorkingPressure
Min. BendRad.
Couplings
Super-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar mm Stem SeriesFerrulePart No
4PC3500-BLACK 1/4 0.53 1 wire 3500 241 101 S FNP-044PC6000-BLACK 1/4 0.59 2 wire 6000 414 101 S FNP-046PC3000-BLACK 3/8 0.68 1 wire 3000 207 127 S FNP-066PC3000-BLUE 3/8 0.68 1 wire 3000 207 127 S FNP-06
6PC5000-BLACK 3/8 0.74 2 wire 5000 345 127 S FNP-066PC5000-BLUE 3/8 0.74 2 wire 5000 345 127 S FNP-06
Due to continual product improvement., we reserve the right to alter specifications without notice 1.29
Section 1Hydraulic Hose
GATES C5MMARINE FUEL LINE HOSE 1 WIRE BRAID HOSESAE J1527 Type A Class 1 and SAE J1942Recommended For: On-shore/off-shore and marine diesel fuel and gasoline applications and hot oil lines up to 212°F. Meets marine fuel specifications SAE J1527 Type A Class 1 and SAE J1942 applications. Exceeds performance requirements of SAE J30RZ for non-marine applications.Tube: Nitrile - Type CReinforcement: One wire braid. Cover: Modified Nitrile - Type C Blue.Temperature Range: -4°F to +212°F (-20°C to +100°C).Couplings: Field-Fit C5 series.
GATES C5DFUEL LINE HOSE 1 WIRE BRAID HOSESAE J1402 Type All and SAE J1019Recommended For: Petroleum-base or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (-4 to -12) meets or exceeds DOT FMVSS 106-74 Type All, SAE J1402 Type All and SAE J1019 and fuel resistence of SAE J30R2.Tube: Black, oil and heat resistent, synthetic rubber (CPE - Type J)Reinforcement: One braid of high tensile steel wire over one braid of polyester. Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber.Temperature Range: -40°F to +300°F (-40°C to +149°C), air to +250°F (+121°C) only, maximum phosphate esters to +212°F (+100°C) only.Couplings: Field-Fit C5 series.
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Field-Fit/C5Field Attachable
I.D.in.
O.D.in.
psi bar psi bar mm mComplete
Coupling Series
5C5M 1/4 .58 500 34 2000 138 25 106 5C5-6C5M 5/16 .67 500 34 2000 138 32 106 6C5-8C5M 13/32 .77 500 34 2000 138 44 91 8C5-
10C5M 1/2 .92 500 34 2000 138 69 76 10C5-12C5M 5/8 1.08 500 34 2000 138 57 60 12C5-
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Approx. Carton Length
Couplings
Field-Fit/C5Field Attachable
I.D.in.
O.D.in.
psi bar psi bar mm mComplete
Coupling Series
4C5D 3/16 0.52 1500 103 6000 414 25 134 4C5-5C5D 1/4 0.58 1500 103 6000 414 25 106 5C5-6C5D 5/16 0.67 1500 103 6000 414 32 106 6C5-8C5D 13/32 0.77 1250 86 5000 345 44 91 8C5-
10C5D 1/2 0.92 1250 86 5000 345 69 76 10C5-12C5D 5/8 1.08 750 52 3000 207 57 60 12C5-16C5D 7/8 1.23 400 28 1600 110 89 45 15C5-
1.30 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES SAFETY STRIPE® IIFuel Lines/PCV/Evaporative Emission Control HoseSAE 30R6 & 30R7
Recommended For: Multi-purpose hose for use on fuel lines, PVC and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol, methanol and ethers (up to the legal limit allowed by EPA)Tube: Nitrile Rubber*Reinforcement: Reinforced construction.Cover: Oil resistant cover resists the effects of high heat and ozone found in engine compartments. Warning: Do not use for pressure lines on fuel injected engines or for cooling systems applications. (Use MPI Hose).
4219 Fuel Line & Tank Vent HoseFuel Lines/Tank VentEmission Control HoseSAE 30R6 & 30R7
Recommended For: Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. NOTE: Not recommended for fuel injection systems.Tube: Nitrile - Type C.*Reinforcement: Single ply of synthetic fibreCover: Type C2 (NBR/PVC). Black. Fuel, oil, ozone and high temperature resistant.Temperature Range: -40°F to +257°F (-40°C to +125°C).
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
SuctionApprox.
Carton Length
I.D.in.
I.D.mm.
psi bar In Hg mm Hg m
27001 3/16 4.8 50 3.4 24 609 7.627002 1/4 6.3 50 3.4 24 609 7.627003 5/16 8.0 50 3.4 24 609 7.627004 3/8 9.5 50 3.4 24 609 7.627006 1/2 12.7 35 2.4 10 254 7.6
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
SuctionApprox.
Carton Length
I.D.in.
I.D.mm.
psi bar In Hg mm Hg m
4219-0103 1/4 6.3 50 3.4 24 609 1984219-0107 5/16 7.9 50 3.4 24 609 1984219-0109 3/8 9.5 50 3.4 24 609 1984219-0102 1/2 12.7 35 2.4 10 254 182
Due to continual product improvement., we reserve the right to alter specifications without notice 1.31
Section 1Hydraulic Hose
GATES PS-188POWER STEERING HOSESAE J2050Recommended For: Power steering pressure lines. Designed to meet requirements of SAE J2050 specifications.Tube: Synthetic rubber specially compunded to provide resistance to high tem-peratures and power steering fluid (Hypalon - Type M)Reinforcement: Two high-strength nylon braids that resist high temperaturesand allow for expansion for system noise dampening.Cover: Black, synthetic rubber developed specifically to resist under hood environment (Hypalon)Temperature: -40°F to +300°F (-40°C to +150°C)Couplings: Super-Crimp
Windshield Washer (27042)SAE J1037
Recommended For: Ideal for windshield washers and vacuum-operated accessories.Tube: Type P (EPDM). Black. Heat resistant.Reinforcement: Non-reinforced.Cover: Uncovered.Temperature Range: -40°F to +257°F (-40°C to +125°C).Meets: SAE J1037, J942b
SPECIFICATIONS(Black cover)
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRadius
Couplings
Super-CrimpNon-Skive
I.D.in.
O.D.in.
psi bar psi bar mm Stem SeriesFerrule Part
No.
6PS-188 3/8 0.71 1500 132 6000 419 83 S FSP-206A
SPECIFICATIONS
Part No.
Hose Size Suction Working PressureApprox. Carton
Length
I.D.in.
Nipple Sizein.
In Hg mm Hg bar m
27041 7/64 1/8 24 610 1.72 15.227042 5/32 3/16 24 610 1.72 15.227043 7/32 1/4 24 610 1.72 15.227044 1/4 5/16 24 610 1.72 15.227050 5/16 3/8 24 610 1.72 7.627053 3/8 7/16 24 610 1.72 7.6
1.32 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
GATES TERMINATOR AIR & MULTI-PURPOSERecommended For: Applications requiring a tough hose with a rugged cover for outstanding abrasion resistance and extended service life where constant flexing and bending is required. This top-of-the-line premium oil resistant hose is designed for applications involving air, oil, and water as well as grease sprays, paraffin waxes, salt solutions and a variety of chemicals. It offers excellent durability for extra long life in mining, air drill, construction, poulry plants, abattoirs, quarries, shipyards, food processing, railroads and other severe service enviroments. It is non-conductive at 1000 volts DCTube: Black. (Nitrile - Type C).Reinforcement: Synthetic, high tensile textile cord. Cover: Yellow (Carboxylated Nitrile - Type C4). Temperature Range: -40°F to +212°F (-40°C to +100°C).
GATES PREMO FLEXAIR & MULTI-PURPOSE
Recommended For: Applications requiring a premium-grade hose with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oil (to 120°F/49°C) and lubricating oils (to 212°F/100°C). Excellent weather and ozone resistance. It is non-conductive to 1000 volts DC.Tube: Black. (Nitrile - Type C).Reinforcement: Synthetic, high tensile textile cord. Cover: Red (Modified Nitrile - Type C2). Temperature Range: -40°F to +212°F (-40°C to +100°C).
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
SuctionMin. Bend
Radius
Approx. Carton Length
I.D.in.
O.D.in.
psi bar In Hg mm Hg mm m
04TERMINATOR 1/4 0.57 501 34.5 30 762 76 18306TERMINATOR 3/8 0.75 501 34.5 25 635 76 18308TERMINATOR 1/2 0.89 501 34.5 25 635 127 18212TERMINATOR 3/4 1.22 501 34.5 15 381 152 12216TERMINATOR 1 1.51 501 34.5 10 254 203 107
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
SuctionMin. Bend
Radius
Approx. Carton Length
I.D.in.
O.D.in.
psi bar In Hg mm Hg mm m
4PREMO 1/4 0.50 250 17.2 30 762 51 1835PREMO 5/16 0.56 250 17.2 30 762 51 1836PREMO 3/8 0.66 250 17.2 30 762 76 1838PREMO 1/2 0.85 250 17.2 25 635 102 183
10PREMO 5/8 0.98 315 21.7 20 508 127 18312PREMO 3/4 1.15 250 17.2 20 508 127 18316PREMO 1 1.47 250 17.2 10 254 203 10020PREMO 1 1/4 1.75 250 17.2 10 254 254 9124PREMO 1 1/2 2.00 250 17.2 10 254 305 76
Due to continual product improvement., we reserve the right to alter specifications without notice 1.33
Section 1Hydraulic Hose
AFX TEFLON HOSESmooth Bore Heavy Wall Imperial rangeMeets or exceeds SAE 100R14 working pressure(Dimensionally not the same as SAE 100R14)
Recommended For: Hydraulic oil lines, Turbo chargers, Steam, Canning sealant lines, Plastic/Rubber moulding presses, Compressor discharge, Fuel lines, Paint spray, for other applications contact Southcott Pty Ltd.Tube: Teflon*(PTFE) hose core is manufactured from premier quality resin, smooth bore heavy wall. No pigments or additives are incorporated thus giving the hose liner a translucent appearance free from any contamination.Cover/Reinforcement: Stainless steel wire braid produced from AISI 304/S15 or BS970-1 1996 quality hard drawn tensile stainless steel wire. Temperature Range: -60°C to +260°CCouplings: Child: Super-Crimp
Warning: PTFE has a very high electrical isolation value, a damaging electrostatic charge can build up inside the hose when electrically resistive fluids/gases are being transmitted at high velocity. Review the potential for electrostatic discharge for every application. If in doubt contact your Southcott agent.
SAE 100R14 working pressures are rated for dynamic applications.Maximum working pressures will vary depending on operating temperature and impulse frequency
* Dupont Registered TM
GATES RFSUS MSHA 2GRecommended For: Low-pressure powder fire suppressant applications in mining, forestry and fire fighting equipment. The red cover is for easy visual identification in these applications.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil resistant synthetic rubber (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire.Cover: Red, oil and abrasion resistant (Modified Nitrile - Type C)Temperature Range: -40°C to +100°CCouplings: Super-Crimp and Gates Mega-Crimp
SPECIFICATIONS
Part No.
Hose SizeMax. SAE 100R14Working Pressure
Max. Static Working Pressure
Min. Static Burst Pressure
Min. BendRad.
Couplings
Crimp Non-Skive
I.D.in.
O.D.in.
psi bar psi bar psi bar mmStem
SeriesFerrulePart No
AFX2004 1/4 0.384 1500 103 2500 172 10000 689 76 S FNT-04AFX2006 3/8 0.485 1500 103 2000 138 8000 552 127 S FNT-06AFX2008 1/2 0.620 800 55 1750 120 7000 483 140 S FNT-08AFX2010 5/8 0.755 800 55 1250 86 5000 345 165 S FNT-10AFX2012 3/4 0.900 800 55 1125 77 4500 310 203 S FNT-12AFX2016 1 1.170 800 55 875 60 3500 241 305 S FNT-16
SPECIFICATIONS
Part No.
Hose SizeWorkingPressure
Min. BurstPressure
Min. BendRad.
Couplings
Super-Crimp“S” Stems
Mega-CrimpNon-Skive
I.D.in.
O.D.Max in.
psi bar psi bar mm FerruleOne Piece
Series
4RFS 1/4 0.45 2750 190 11000 758 101.6 FNP-04 4G-6RFS 3/8 0.68 2250 155 9000 621 127 FNP-06 6G-8RFS 1/2 0.80 2000 138 8000 551 177.8 FNP-08 8G-
12RFS 3/4 1.09 1250 86 5000 344 241.3 FNP-12 12G-
1.34 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
HSG WIRE SPRING GUARD
HOSE STRAPS & BUNCH BINDERS
Suitable for securing several hoses together
Part Number“A”(In.)
(±.015)
“G”(In.)
“P”(In.)
HSG-01 0.550 14(.080) 7/32
HSG-02 0.676 14(.080) 7/32
HSG-03 0.738 14(.080) 7/32
HSG-04 0.852 14(.080) 7/32
HSG-05 0.915 14(.080) 7/32
HSG-06 0.977 14(.080) 7/32
HSG-07 1.040 14(.080) 7/32
HSG-08 1.122 14(.080) 7/32
HSG-09 1.278 11(.120) 11/32
HSG-10 1.340 11(.120) 11/32
HSG-11 1.578 11(.120) 11/32
HSG-12 1.625 11(.120) 11/32
HSG-13 1.847 11(.120) 13/32
HSG-14 2.112 11(.120) 13/32
HSG-15 2.312 11(.120) 13/32
HSG-15A 2.690 11(.120) 13/32
HSG-16 2.937 11 (.120 13/32
Part No.Length
Type Descriptionmm.
BS001 400 Non FRAS Rated Hose Strap
BS002 800 Non FRAS Rated Hose Strap
BS003 1500 Non FRAS Rated Hose Strap
BS006 600 Non FRAS Rated Hose Strap
AB001 400 FRAS Rated Hose Strap
AB002 800 FRAS Rated Hose Strap
AB003 1500 FRAS Rated Hose Strap
BUNCH-SS N/A FRAS Rated Bunch Binder in Stainless Steel
Due to continual product improvement., we reserve the right to alter specifications without notice 1.35
Section 1Hydraulic Hose
HPSG FLAT PLASTIC GUARD
Temperature Range: -40°C to 121°C
Economical, lightweight plastic sleeving protects hose from water, air, gasoline, oil and hydraulic fluids.Can be used to bundle several hoses together
SPIRAL GUARD™ SGXFLAT PLASTIC SPIRALGUARDSGX Standard: Available in black,blue, yellow and redSGXFRAS Flame Retardant Anti Static: compliance to ISO6805
Part NumberCoil I.D.
(A)(In.)
Strip Width(B)(In.)
Thickness(In.)
ContinuousLength Pkg
(m)
HPSG-04 1/4 1/4 0.040 30
HPSG-06 3/8 1/4 0.040 30
HPSG-08 1/2 3/8 0.070 30
HPSG-10 5/8 3/8 0.070 15
HPSG-12 3/4 3/8 0.070 15
HPSG-16 1 5/8 0.115 15
HPSG-22 1 3/8 5/8 0.115 7.5
HPSG-30 1 7/8 5/8 0.115 7.5
SPECIFICATIONS
Part Number
1-Wire 2-WireMulti Spiral
HoseO.D. Range
mm
HoseO.D. Range in
Coil LengthmStandard
Flame Resistant Anti-Static
SGX12 SGX12FRAS -4 -4 - 8 - 12 1/4 - 3/8 50 m
SGX16 SGX16FRAS -4 -4 - 12 - 17 1/2 - 5/8 20 m
SGX20 SGX20FRAS -6 -6 -6 16 - 22 5/8 - 7/8 20 m
SGX25 SGX25FRAS -8 -8 -8 22 - 28 7/8 - 1 1/16 20 m
SGX32 SGX32FRAS -12 -10 -12 27 - 33 1 1/16 - 1 1/4 20 m
SGX40 SGX40FRAS -16 -16 -16 33 - 42 1 1/4 - 1 5/8 20 m
SGX50 SGX50FRAS -20 -20 -20 42 - 55 1 5/8 - 2 1/8 20 m
SGX63 SGX63FRAS 32 -24 -24 52 - 65 2 - 2 1/2 20 m
SGX75 SGX75FRAS - -32 -32 65 - 80 2 1/2 - 3 1/4 10/20 m
SGX90 SGX90FRAS Hose looms 80mm - 150mm diameter 3 - 6 10/20 m
SGX110 SGX110FRAS Hose looms 150mm - and above 6 plus 6/10 m
SGX125 SGX125FRAS - - - - 6 m
1.36 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
HNG NYLON PROTECTIVE SLEEVE
Gates Nylon Sleeves perform a dual role:They provide excellent abrasive resistance to protect individual hoses.They can be used to bundle several hose assemblies together for maximum protection.Downtime and maintenance costs are reduced.Nylon Sleeves are unique because they form an extra protective layer against abrasive forces.Construction: Thousands of tiny Nylon filaments,woven into the texturized yarn, “friz” providing a self-renewing shield that is extremely resistant to severe abrasion.Note: Do not use Nylon Sleeve where ambient temperature exceeds 120°C.
LIFEGUARD HOSE BURST NYLON PROTECTIVE SLEEVEMEETS MDG41 REQUIREMENTS
The LifeGuard line-of-sight sleeving system is an effective, economical alternative to costly metal shielding or re-routing of hose lines, and does not affect system performance. With an inner layer of tightly woven filament nylon and an outer layer of textured nylon that also resists abrasion, it meets ISO3457 and MSHA flame-resistance requirements.
SPECIFICATIONS
Part No.Inside Flat A Sleeve I.D. B
Colourins. mm ins.
HNG-14 1.42 36.1 0.90 Black
HNG-16 1.67 42.4 1.06 Black
HNG-20 1.92 48.8 1.22 Black
HNG-24 2.24 56.6 1.42 Black
HNG-28 2.85 72.4 1.81 Black
HNG-32 3.44 87.4 2.19 Black
HNG-38 3.74 95.0 2.38 Black
HNG-42 4.12 104.6 2.62 Black
HNG-46 4.53 115.1 2.88 Black
Part NumberHose Size Contains Hose Bursts Clamps To Suit
inch mm Aluminium Stainless Steel
14LG3K 1/4 6.3
Pin Hole up to 3000 psiBurst up to 6000 psi
6SC4 6SC4SS
16LG3K 3/8 9.5 6SC4 6SC4SS
20LG3K 1/2 12.5 8SC4 8SC4SS
22LG3K 5/8 15.9 10SC4 10SC4SS
26LG3K 3/4 19.1 12SC4 12SC4SS
32LG3K 1 25.4 16SC4 16SC4SS
14LG5K 1/4 6.3
Pin Hole up yo 5000 psiBurst up to10000 psi
6SC4 6SC4SS
16LG5K 3/8 9.5 6SC4 6SC4SS
20LG5K 1/2 12.5 8SC4 8SC4SS
22LG5K 5/8 15.9 10SC4 10SC4SS
26LG5K 3/4 19.1 12SC4 12SC4SS
0
B
0 0.09" ± 0.02"
0 A ±0.12
Due to continual product improvement., we reserve the right to alter specifications without notice 1.37
Section 1Hydraulic Hose
TEXSLEEVE HOSE BURST NYLON PROTECTIVE SLEEVE
HBR BEND RESTRICTOR
Flexible Hose Bend Restrictors protect the hose near the coupling.Gates tapered PVC sleeves reduce bending stresses in the hose near the coupling to prevent damage, such as in power wash applications. Installed during the assembly, this smoothly-finished product withstands temperatures from - 40°C to +93°C and is available in nine sizes.
Features: Benefits:Tapered Design:Reduces bending stress near the hose-coupling junction, so extra long, more trouble free hose life can be expected.Smooth Finish:Will not scratch finish on equipment being washed.Attractive appearance enhances look of quality.Wide Temperature Range:Helps give extra long service life for both hot and cold power wash assemblies.Friction Fit:No adhesive or clamps required to hold bend restrictor in place on hose assembly. Saves assembly cost.
Part No. Flat I.D. (mm) Round Diam. (mm)Suits G1 & G2 with ‘S’ series fittings
TEXS17 27 17
TEXS20 31 20 3/16” (-03)
TEXS23 36 23 1/4” (-04)
TEXS25 39 25 5/16” (-05)
TEXS27 42 27 3/8” (-06)
TEXS31 49 31 1/2” (-08)
TEXS33 52 33 5/8” (-10)
TEXS36 54 36
TEXS40 63 40
TEXS44 69 44 3/4” (12)
TEXS47 74 47 1” (-16)
TEXS53 83 53
TEXS55 86 55
TEXS60 94 60 1-1/4” (-20)
TEXS66 104 66
TEXS73 115 73 1-1/2” (-24)
TEXS85 134 85
TEXS93 146 93 2” (-32)
TEXS112 176 112
TEXS127 202 127
Part No.I.D. L
ColourHose Size
& Typeins. mm ins. mm
HBR-1050 0.63 16.0 5.5 140 Black4G1, 4G1H, 4G2,
4M3K, 4M2T, 4PCI, 4PCII
HBR-1051 0.73 18.5 6.0 152 Black4C2A, 6G1, 6G1H,
6M3K, 6M2T, 6C7S, 6PCI, 6WM
HBR-1054 0.77 19.5 7.0 178 Black 6C1A, 6G2, 6PCII
HBR-1052 0.84 21.3 7.0 178 Black6C2A, 8G1, 8G1H,
8PCII
HBR-1053 1.00 25.4 8.0 203 Black8C1A, 8C2A, 10G1,
10G1H,10M2T
0 I.D.
1 L
MEETS MDG41 REQUIREMENTS
TEXSLEEVE is a continuous nylon fibre treatedwith a special process to eliminate air from be-tween the fibres. This process gives the product asuper compact textile wire making it far betterthan any other standard fibre sleeve on the market.The Department of Primary Industries requires thistype of protection for hydraulic hoses where thereis potential for harm to personnel or the environ-ment in the event of a hose failure.
TEXSLEEVE also has excellent abrasion and fireresistance capabilities making it the top of the linechoice in hose protection.
Note: TEXSLEEVE can be fitted clamped or un-clamped. For best performance it is recommendedthat shrink-band clamps be used to secure thesleeve over the crimped hose ferrule. See page 5.28
1.38 Due to continual product improvement., we reserve the right to alter specifications without notice
Section 1Hydraulic Hose
HeatGuard Silicon Fire Jacket
HeatGuard is a completely non-asbestos, heat resistant, protective sleeving. Its special silicone coating can also withstand a broad range of solvents and fuels. It goes on easily over most hoses and couplings, with only hose clamps or wire ties required for fastening.
Best of all, HeatGuard can pay for itself in reduced replacement and maintenance costs.
HeatGuard is knitted, coated fibreglass; meets SAE AS1072A specification Temperature range: -54°C to +260°C for continuous exposure.
Part No. I.D. (In) Part No. I.D. (In) Part No. I.D. (In)
HTG-4 1/4 HTG-16 1 HTG-40 2-1/2
HTG-5 0.31 HTG-18 1.12 HTG-42 2.62
HTG-6 3/8 HTG-20 1-1/4 HTG-44 2-3/4
HTG-7 0.44 HTG-22 1.38 HTG-46 2.88
HTG-8 1/2 HTG-24 1-1/2 HTG-48 3
HTG-9 0.56 HTG-26 1.62 HTG-50 3.12
HTG-10 0.62 HTG-28 1-3/4 HTG-52 3-1/4
HTG-11 0.69 HTG-30 1.88 HTG-56 3-1/2
HTG-12 3/4 HTG-32 2 HTG-60 3-3/4
HTG-13 0.81 HTG-34 2.12 HTG-64 4
HTG-14 0.88 HTG-36 2-1/4
HTG-15 15/16 HTG-38 2.38
DashSize
C5C C5D C5M
C5E G1 G2 M3KM2T
M4K M5KM6K
C12MG4K
C12 G3K
G5K G6K
GMVC14
C14NC
2 HTG-12 HTG-12
4 HTG-12 HTG-12 HTG-12 HTG-14 HTG-12 HTG-12 HTG-8
5 HTG-14 HTG-14 HTG-14 HTG-14 HTG-10
6 HTG-16 HTG-16 HTG-16 HTG-14 HTG-16 HTG-16 HTG-16 HTG-12
8 HTG-16 HTG-16 HTG-18 HTG-18 HTG-16 HTG-16 HTG-18 HTG-18 HTG-14
10 HTG-18 HTG-18 HTG-18 HTG-18 HTG-18 HTG-18 HTG-22 HTG-14
12 HTG-22 HTG-18 HTG-22 HTG-22 HTG-22 HTG-22 HTG-24 HTG-24 HTG-24 HTG-16
16 HTG-24 HTG-24 HTG-26 HTG-28 HTG-28 HTG-26 HTG-28 HTG-28 HTG-28 HTG-20
20 HTG-28 HTG-28 HTG-32 HTG-34 HTG-32 HTG-32 HTG-32
24 HTG-32 HTG-36 HTG-38 HTG-38 HTG-40 HTG-36
32 HTG-38 HTG-44 HTG-48 HTG-44 HTG-48 HTG-44
36 HTG-50 HTG-48
40 HTG-52
48 HTG-60
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 2.1
Section 2Field-Fit Couplings
Contents
Part No. ................. Description...........................................................................................................................Page
FIELD-FIT COUPLINGSTo suit Gates hose types:G1, G2, C1A, C2A, C3H
BN1 ....................... Body to suit G1 Hose (Non-Skive) ......................................................................................2.4BN2 ....................... Body to suit G2 Hose (Non-Skive) ......................................................................................2.4BN3 ....................... Body to suit C3H Hose (Non-Skive) ...................................................................................2.4BS1........................ Body to suit C1A Hose (Skive)............................................................................................2.4BS2........................ Body to suit C2A Hose (Skive)............................................................................................2.4
RMB...................... Straight Male BSPT .............................................................................................................2.4RMP ...................... Straight Male BSPP .............................................................................................................2.4RMBX................... Straight Male BSPT.Swivel .................................................................................................2.4RMBX90C ............ 90° Close Male BSPT.Swivel ..............................................................................................2.4
RFB....................... Straight Female BSPP.Swivel..............................................................................................2.5RFB45 ................... 45° Tube Style Female BSPP.Swivel ..................................................................................2.5RFB45C ................ 45° Close Style Female BSPP.Swivel..................................................................................2.5RFB90 ................... 90° Tube Style Female BSPP.Swivel ..................................................................................2.5RFB90C ................ 90° Close Style Female BSPP.Swivel..................................................................................2.5
RMJ....................... Straight Male JIC .................................................................................................................2.5RFJ ........................ Straight Female JIC Swivel..................................................................................................2.5RFJ45 .................... 45° Tube Style Female JIC Swivel ......................................................................................2.6RFJ45C ................. 45° Close Style Female JIC Swivel .....................................................................................2.6RFJ90 .................... 90° Tube Style Female JIC Swivel ......................................................................................2.6RFJ90L.................. 90° Long Drop Tube Style Female JIC Swivel....................................................................2.6RFJ90C ................. 90° Tube Style Female JIC Swivel ......................................................................................2.6
RFFO..................... Flat Female Swivel O-Ring Flat Face..................................................................................2.6RFFO90................. 90° Female Swivel O-Ring Flat Face ..................................................................................2.6
RMN ..................... Straight Male NPTF .............................................................................................................2.6RFN....................... Straight Female NPTF .........................................................................................................2.6RMO ..................... Straight Male S.A.E. ‘O’ Ring Boss ....................................................................................2.7RMOX................... Straight Male S.A.E. ‘O’ Ring Boss Swivel ........................................................................2.7RMOX90C............ 90° Close Male S.A.E. ‘O’ Ring Boss Swivel .....................................................................2.7
RFL ....................... Straight SAE ‘O’ Ring Flange (Code 61) ............................................................................2.7RFL45 ................... 45° SAE ‘O’ Ring Flange (Code 61) ...................................................................................2.7RFL90 ................... 90° SAE ‘O’ Ring Flange (Code 61) ...................................................................................2.7
RMS ...................... Straight Male SAE ...............................................................................................................2.7RFS ....................... Straight Female SAE.Swivel................................................................................................2.7RFS45C................. 45° Tube Style Female SAE.Swivel ....................................................................................2.7RFS90 ................... 90° Tube Style Female SAE.Swivel ....................................................................................2.7RFS90C................. 90° Close Style Female SAE Swivel ...................................................................................2.7
RLS ....................... Lifesaver...............................................................................................................................2.8RHJ ....................... Hose Joiner...........................................................................................................................2.8
2.2 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Contents
Part No. ................. Description .......................................................................................................................... Page
Section 2Field-Fit Couplings
FIELD-FIT/C5 COUPLINGSTo suit Gates hose types:C5C, C5D & C5M
5MB .......................Straight Male BSPT. ............................................................................................................2.9C5-RMP.................Straight Male NPTF.............................................................................................................2.9C5-RFJX ................Straight Female JIC Swivel .................................................................................................2.9C5-RFJX45 ............45° Tube Style Female JIC Swivel ......................................................................................2.9C5-RFJX90 ............90° Tube Style Female JIC Swivel ......................................................................................2.9C5-RFJSX .............Straight Female JIC/SAE (Dual Cone Seat) Swivel ............................................................2.9C5-RFJSX45..........45° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.9C5-RFJSX90..........90° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.9C5-RFSX ...............Straight Female SAE Swivel ...............................................................................................2.10C5-RFSX45 ...........45° Tube Style Female SAE Swivel ....................................................................................2.10C5-RFSX90 ...........90° Tube Style Female SAE Swivel ....................................................................................2.10
FIELD-FIT/C5E COUPLINGSTo suit Gates hose types:C5E - SAE J1402 Type E.A1.(Air brake) SAE J1019 High Temp
C5E-RMP ..............Straight Male NPTF.............................................................................................................2.11C5E-RFJX..............Straight Female JIC Swivel .................................................................................................2.11C5E-RFJX45..........45° Tube Style Female JIC Swivel ......................................................................................2.11C5E-RFJX90..........90° Tube Style Female JIC Swivel ......................................................................................2.11C5E-RFJSX ...........Straight Female JIC/SAE (Dual Cone Seat) Swivel ............................................................2.11C5E-RFJSX45 .......45° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.11C5E-RFJSX90 .......90° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.11C5E-RFSX.............Straight Female SAE. Swivel ..............................................................................................2.12C5E-RFSX45.........45° Tube Style Female SAE Swivel ....................................................................................2.12C5E-RFSX90.........90° Tube Style Female SAE Swivel ....................................................................................2.12C5E-RMIX ............Straight Male SAE Inverted Flare .......................................................................................2.12C5E-RMIX45 ........45° Male SAE Inverted Flare...............................................................................................2.12C5E-RMIX90 ........90° Male SAE Inverted Flare...............................................................................................2.12
LOCK-ON COUPLINGS
LMB.......................Straight Male BSP.T ............................................................................................................2.13LFB ........................Straight Female BSP.P. Swivel............................................................................................2.13LFB90C .................90° Close Style Female BSP.P Swivel ................................................................................2.13LMN ......................Straight Male NPTF.............................................................................................................2.13LMJ........................Straight Male JIC .................................................................................................................2.13LMS .......................Straight Male SAE ...............................................................................................................2.13LFJ .........................Straight Female JIC Swivel .................................................................................................2.13LFJS.......................Straight Female JIC/SAE (Dual Cone Seat) Swivel ............................................................2.13LFJ90 .....................90° Tube Style Female JIC Swivel ......................................................................................2.14LFJ90C ..................90° Close Style Female JIC Swivel .....................................................................................2.14LFS ........................Straight Female SAE Swivel ...............................................................................................2.14LMIX .....................Straight Male SAE Inverted Flare .......................................................................................2.14LSP ........................Straight Stand Pipe...............................................................................................................2.14LHJ ........................Straight Hose Joiner.............................................................................................................2.14
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 2.3
Section 2Field-Fit Couplings
Contents
Part No. ................. Description...........................................................................................................................Page
CLAMP-ON COUPLINGS
CB4 ....................... Hosetail Male/Male BSPT x LP...........................................................................................2.15CP4........................ Hosetail Male/Male BSPP x LP...........................................................................................2.15CM4 ...................... Hosetail Male/Male Metric x LP .........................................................................................2.15CN4 ....................... Hosetail Male/Male NPTF x LP ..........................................................................................2.15C5.......................... Hosetail Male/Male SAE O-Ring Boss x LP.......................................................................2.15
CB5 ....................... Hosetail Female/Male BSPT x LP .......................................................................................2.16
C41........................ Hosetail 45° Elbow Male/Male SAE O-Ring Boss x LP.....................................................2.16CB41 ..................... Hosetail 45° Elbow Male/Male BSPT x LP.........................................................................2.16CN41 ..................... Hosetail 45° Elbow Male/Male NPTF x LP ........................................................................2.16
C60........................ Hosetail 90° Elbow Male/Male SAE O-Ring Boss x LP.....................................................2.16CB60 ..................... Hosetail 90° Elbow Male/Male BSPT x LP.........................................................................2.16CP60...................... Hosetail 90° Elbow Male/Male BSPP x LP.........................................................................2.17CN60 ..................... Hosetail 90° Elbow Male/Male NPTF x LP ........................................................................2.17
2.4 *Manufactured To Order - Minimum Order Quantities May Apply
Section 2Field-Fit Couplings
Body N/Skive 100R1ATOne Wire Braid
G1 HoseNon-Skive
P/Number................... ...................HoseBN1-04 ...................... ......................1/4BN1-06 ...................... ......................3/8BN1-08 ...................... ......................1/2BN1-12 ...................... ......................3/4BN1-16 ...................... .........................1
Body N/Skive 100R2ATTwo Wire Braid
G2 HoseNon-Skive
P/Number................... ...................HoseBN2-04 ...................... ......................1/4BN2-06 ...................... ......................3/8BN2-08 ...................... ......................1/2BN2-10 ...................... ......................5/8BN2-12 ...................... ......................3/4BN2-16 ...................... .........................1
Body N/Skive 100R3Two Textile Braid
C3H HoseNon-Skive
P/Number................... ...................HoseBN3-04 ...................... ......................1/4BN3-06 ...................... ......................3/8BN3-08 ...................... ......................1/2BN3-12 ...................... ......................3/4
Body Skive 100R1AOne Wire Braid
C1A HoseSkive
P/Number................... ...................HoseBS1-04 ....................... ......................1/4BS1-06 ....................... ......................3/8BS1-08 ....................... ......................1/2BS1-12 ....................... ......................3/4BS1-16 ....................... .........................1
Body Skive 100R2ATwo Wire Braid
C2A HoseSkive
P/Number................... ...................HoseBS2-04 ....................... ......................1/4BS2-06 ....................... ......................3/8BS2-08 ....................... ......................1/2BS2-12 ....................... ......................3/4BS2-16 ....................... .........................1
Straight Male BSPTG1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRMB-0204 ................. 1/8 ................1/4RMB-0404 ................. 1/4 ................1/4RMB-0406 ................. 1/4 ................3/8RMB-0604 ................. 3/8 ................1/4RMB-0606 ................. 3/8 ................3/8RMB-0608 ................. 3/8 ................1/2RMB-0806 ................. 1/2 ................3/8RMB-0808 ................. 1/2 ................1/2RMB-0810 ................. 1/2 ................5/8RMB-0812 ................. 1/2 ................3/4RMB-1008 ................. 5/8 ................1/2RMB-1208 ................. 3/4 ................1/2RMB-1212 ................. 3/4 ................3/4RMB-1612 ................. 1....................3/4RMB-1616 ................. 1.......................1
Straight Male BSPPG1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRMP-0606..................3/8 ................ 3/8RMP-0806..................1/2 ................ 3/8RMP-0808..................1/2 ................ 1/2
Straight Male BSPTSwivel
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRMBX-0606...............3/8 ................ 3/8RMBX-0608...............3/8 ................ 1/2RMBX-0806...............1/2 ................ 3/8RMBX-0808...............1/2 ................ 1/2
* RMBX-1208...............3/4 ................ 1/2RMBX-1212...............3/4 ................ 3/4
90 Close Male BSPTSwivel
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRMBX90C-0606........3/8 ................ 3/8
* RMBX90C-0608........3/8 ................ 1/2RMBX90C-0806........1/2 ................ 3/8RMBX90C-0808........1/2 ................ 1/2RMBX90C-1212........3/4 ................ 3/4
*Manufactured To Order - Minimum Order Quantities May Apply 2.5
Section 2Field-Fit Couplings
Straight Female BSPPSwivel
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRFB-0204...................1/8 ................ 1/4RFB-0404...................1/4 ................ 1/4RFB-0406...................1/4 ................ 3/8RFB-0604...................3/8 ................ 1/4RFB-0606...................3/8 ................ 3/8RFB-0608...................3/8 ................ 1/2RFB-0806...................1/2 ................ 3/8RFB-0808...................1/2 ................ 1/2RFB-1008...................5/8 ................ 1/2RFB-1208...................3/4 ................ 1/2RFB-1212...................3/4 ................ 3/4RFB-1612...................1 ................... 3/4RFB-1616...................1 ...................... 1
45° Tube Female BSPPSwivel
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRFB45-0404...............1/4 ................ 1/4RFB45-0606...............3/8 ................ 3/8
* RFB45-0806...............1/2 ................ 3/8RFB45-0808...............1/2 ................ 1/2RFB45-1212...............3/4 ................ 3/4RFB45-1616...............1 ...................... 1
45° Close Female BSPPSwivel
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRFB45C-0404 ............1/4 ................ 1/4RFB45C-0606 ............3/8 ................ 3/8RFB45C-0806 ............1/2 ................ 3/8RFB45C-0808 ............1/2 ................ 1/2RFB45C-1212 ............3/4 ................ 3/4RFB45C-1616 ............1 ...................... 1
90° Tube Female BSPPSwivel
G1, G2, C1A, C2A, C3H
P/Number....................Thread .......HoseRFB90-0404 ...............1/4 ................1/4RFB90-0606 ...............3/8 ................3/8RFB90-0806 ...............1/2 ................3/8RFB90-0808 ...............1/2 ................1/2RFB90-1212 ...............3/4 ................3/4RFB90-1616 ...............1 ...................... 1
90° Close Female BSPPSwivel
G1, G2, C1A, C2A, C3H
P/Number....................Thread .......Hose* RFB90C-0204 ............1/8 ................1/4
RFB90C-0404 ............1/4 ................1/4RFB90C-0406 ............1/4 ................3/8RFB90C-0604 ............3/8 ................1/4RFB90C-0606 ............3/8 ................3/8RFB90C-0608 ............3/8 ................1/2RFB90C-0806 ............1/2 ................3/8RFB90C-0808 ............1/2 ................1/2RFB90C-1208 ............3/4 ................1/2RFB90C-1212 ............3/4 ................3/4RFB90C-1616 ............1 ...................... 1
Straight Male JICG1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRMJ-0704 .................. 7/16...............1/4RMJ-0804 .................. 1/2.................1/4RMJ-0904 .................. 9/16...............1/4RMJ-0906 .................. 9/16...............3/8RMJ-0908 .................. 9/16...............1/2RMJ-1206 .................. 3/4.................3/8RMJ-1208 .................. 3/4.................1/2RMJ-1406 .................. 7/8.................3/8RMJ-1408 .................. 7/8.................1/2RMJ-1410 .................. 7/8.................5/8RMJ-1412 .................. 7/8.................3/4RMJ-1708 .................. 1-1/16 ...........1/2RMJ-1710 .................. 1-1/16 ...........5/8RMJ-1712 .................. 1-1/16 ...........3/4RMJ-1912 .................. 1-3/16 ...........3/4RMJ-2116 .................. 1-5/16 ..............1
Straight Female JICSwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFJ-0704.................... 7/16...............1/4RFJ-0804.................... 1/2.................1/4RFJ-0904.................... 9/16...............1/4RFJ-0906.................... 9/16...............3/8RFJ-0908.................... 9/16...............1/2RFJ-1206.................... 3/4.................3/8RFJ-1208.................... 3/4.................1/2RFJ-1406.................... 7/8.................3/8RFJ-1408.................... 7/8.................1/2RFJ-1410.................... 7/8.................5/8RFJ-1412.................... 7/8.................3/4RFJ-1708.................... 1-1/16 ...........1/2RFJ-1710.................... 1-1/16 ...........5/8RFJ-1712.................... 1-1/16 ...........3/4RFJ-1716.................... 1-1/16 ..............1RFJ-1912.................... 1-3/16 ...........3/4RFJ-2112.................... 1-5/16 ...........3/4RFJ-2116.................... 1-5/16 ..............1
2.6 *Manufactured To Order - Minimum Order Quantities May Apply
Section 2Field-Fit Couplings
45° Female JICSwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFJ45-0704................ 7/16...............1/4
* RFJ45-0804................ 1/2.................1/4RFJ45-0904................ 9/16...............1/4RFJ45-0906................ 9/16...............3/8RFJ45-1206................ 3/4.................3/8RFJ45-1208................ 3/4.................1/2RFJ45-1408................ 7/8.................1/2RFJ45-1712................ 1-1/16 ...........3/4RFJ45-2116................ 1-5/16 ..............1
45° Close Female JICSwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFJ45C-0704............. 7/16...............1/4RFJ45C-0804............. 1/2.................1/4RFJ45C-0904............. 9/16...............1/4RFJ45C-0906............. 9/16...............3/8RFJ45C-1206............. 3/4.................3/8RFJ45C-1208............. 3/4.................1/2RFJ45C-1408............. 7/8.................1/2RFJ45C-1712............. 1-1/16 ...........3/4
* RFJ45C-2116............. 1-5/16 ..............1
90° Tube Female JICSwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFJ90-0704................ 7/16...............1/4RFJ90-0804................ 1/2.................1/4RFJ90-0904................ 9/16...............1/4RFJ90-0906................ 9/16...............3/8RFJ90-1206................ 3/4.................3/8RFJ90-1208................ 3/4.................1/2RFJ90-1408................ 7/8.................1/2RFJ90-1410................ 7/8.................5/8RFJ90-1708................ 1-1/16 ...........1/2RFJ90-1710................ 1-1/16 ...........5/8RFJ90-1712................ 1-1/16 ...........3/4RFJ90-2116................ 1-5/16 ..............1
90° Female JICLong Drop Swivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFJ90L-0704 ............. 7/16 ..............1/4RFJ90L-0904 ............. 9/16 ..............1/4RFJ90L-0906 ............. 9/16 ..............3/8RFJ90L-1206 ............. 3/4 ................3/8RFJ90L-1208 ............. 3/4 ................1/2RFJ90L-1408 ............. 7/8 ................1/2RFJ90L-1712 ............. 1-1/16 ...........3/4RFJ90L-2116 ............. 1-1/16 ...........3/4
90° Close Female JICSwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFJ90C-0704............. 7/16 ..............1/4RFJ90C-0804............. 1/2 ................1/4RFJ90C-0904............. 9/16 ..............1/4RFJ90C-0906............. 9/16 ..............3/8RFJ90C-0908............. 9/16 ..............1/2RFJ90C-1206............. 3/4 ................3/8RFJ90C-1208............. 3/4 ................1/2RFJ90C-1408............. 7/8 ................1/2RFJ90C-1708............. 7/8 ................1/2RFJ90C-1712............. 1-1/16 ...........3/4RFJ90C-2116............. 1-5/16 ..............1
Straight Female SwivelFlat Faced O-Ring (ORFS)
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFFO-0904................ 11/16 ............1/4RFFO-1104................ 11/16 ............1/4RFFO-1106................ 11/16 ............3/8RFFO-1308................ 13/16 ............1/2RFFO-1608................ 1....................1/2
90° Female SwivelFlat Faced O-Ring (ORFS)
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRFFO90-0904 ............9/16 .............. 1/4RFFO90-1104 ............11/16 ............ 1/4RFFO90-1106 ............11/16 ............ 3/8RFFO90-1308 ............13/16 ............ 1/2RFFO90-1608 ............1 ................... 1/2
Straight Male NPTFG1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRMN-0404 .................1/4 ................ 1/4RMN-0406 .................1/4 ................ 3/8RMN-0604 .................3/8 ................ 1/4RMN-0606 .................3/8 ................ 3/8RMN-0808 .................1/2 ................ 1/2RMN-1208 .................3/4 ................ 1/2RMN-1212 .................3/4 ................ 3/4
* RMN-1616 .................1 ...................... 1
Straight Female NPTFG1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRFN-0404...................1/4 ................ 1/4RFN-0406...................1/4 ................ 3/8RFN-0808...................1/2 ................ 1/2
*Manufactured To Order - Minimum Order Quantities May Apply 2.7
Section 2Field-Fit Couplings
Straight Male S.A.E. ‘O’ Ring Boss
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRMO-1206 .................3/4 ................ 3/8RMO-1208 .................3/4 ................ 1/2RMO-1406 .................7/8 ................ 3/8RMO-1408 .................7/8 ................ 1/2
90 Duro O Ring supplied
Straight MaleS.A.E. ‘O’ Ring Boss (Swivel)
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRMOX-1206 ..............3/4 ................ 3/8
* RMOX-1208 ..............3/4 ................ 1/2RMOX-1406 ..............7/8 ................ 3/8RMOX-1408 ..............7/8 ................ 1/2
* RMOX-1708 ..............1-1/16........... 1/2* RMOX-1712 ..............1-1/16........... 3/4
RMOX-2116 ..............1-5/16.............. 190 Duro O Ring supplied
90° Close MaleS.A.E. ‘O’ Ring Boss (Swivel)
G1, G2, C1A, C2A, C3H
P/Number ...................Thread....... HoseRMOX90C-1206........3/4 ................ 3/8RMOX90C-1208........3/4 ................ 1/2
* RMOX90C-1406........7/8 ................ 3/8RMOX90C-1408........7/8 ................ 1/2RMOX90C-1712........1-1/16........... 3/4
90 Duro O Ring supplied
Straight SAE‘O’ Ring Flange
G1, G2, C1A, C2A, C3HCode 61
P/Number....................Flange........HoseRFL-1212 ...................3/4 ................3/4
* RFL-1612 ...................1 ...................3/4RFL-1616 ...................1 ...................... 1
* RFL-2416 ...................1-1/2 ................ 190 Duro O Ring supplied
45° SAE ‘O’ Ring FlangeG1, G2, C1A, C2A, C3H
Code 61
P/Number....................Flange........Hose* RFL45-1612 ...............1 ...................3/4* RFL45-2012 ...............1-1/4 .............3/4* RFL45-2016 ...............1-1/4 ................ 190 Duro O Ring supplied
90° SAE ‘O’ Ring FlangeG1, G2, C1A, C2A, C3H
Code 61
P/Number....................Flange........HoseRFL90-1212 ...............3/4 ................3/4
90 Duro O Ring supplied
Straight Male SAE G1, G2, C1A, C2A, C3H
P/Number....................Thread .......HoseRMS-0804 ..................1/2 ................1/4
* RMS-1006 ..................5/8 ................3/8RMS-1206 ..................3/4 ................3/8
Straight Female SAESwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......HoseRFS-0704................... 7/16...............1/4RFS-0806................... 1/2.................3/8RFS-1006................... 5/8.................3/8RFS-1206................... 3/4.................3/8
45° Close Female SAESwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......Hose* RFS45C-1006 ............ 5/8.................3/8
90° Tube Female SAESwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......Hose* RFS90-1006............... 5/8.................3/8
90° Close Female SAESwivel
G1, G2, C1A, C2A, C3H
P/Number................... Thread .......Hose* RFS90C-0704 ............ 7/16...............1/4
RFS90C-1006 ............ 5/8.................3/8RFS90C-1206 ............ 3/4.................3/8
2.8 *Manufactured To Order - Minimum Order Quantities May Apply
Section 2Field-Fit Couplings
LifesaverG1, G2, C1A, C2A, C3H
P/Number................... Tube...........HoseRLS-0404................... 1/4.................1/4
* RLS-0604................... 3/8.................1/4RLS-0606................... 3/8.................3/8
* RLS-0806................... 1/2.................3/8RLS-0808................... 1/2.................1/2RLS-1008................... 5/8.................1/2RLS-1212................... 3/4.................3/4RLS-1616................... 1.......................1
Hose JoinerG1, G2, C1A, C2A, C3H
P/Number................... ...................HoseRHJ-04....................... ......................1/4RHJ-06....................... ......................3/8RHJ-08....................... ......................1/2RHJ-12....................... ......................3/4
* RHJ-16....................... .........................1
*Manufactured To Order - Minimum Order Quantities May Apply 2.9
Section 2Field-Fit / C5 Couplings
Straight Male BSPTC5C, C5D & C5M Hose
P/Number ...................Thread....... Hose5MB-0204 ..................1/8 .............. 3/165MB-0404 ..................1/4 .............. 3/16
Straight Male NPTFC5C, C5D & C5M Hose
P/Number ...................Thread....... Hose4C5-2RMP .................1/8 .............. 3/164C5-4RMP .................1/4 .............. 3/165C5-4RMP .................1/4 ................ 1/46C5-4RMP .................1/4 .............. 5/166C5-6RMP .................3/8 .............. 5/168C5-8RMP .................1/2 ............ 13/3212C5-12RMP .............3/4 ................ 5/816C5-16RMP .............1 ................... 7/8
Straight Female JICSwivel
C5C, C5D & C5M Hose
P/Number....................Thread .......Hose6C5-6RFJX.................9/16 ............5/168C5-6RFJX.................9/16 ..........13/3210C5-12RFJX.............1-1/16 ...........1/212C5-12RFJX.............1-1/16 ...........5/816C5-16RFJX.............1-5/16 ...........7/820C5-20RFJX.............1-5/8 ..........1-1/824C5-24RFJX.............1-7/8 ..........1-3/832C5-32RFJX.............2-1/2 ......1-13/16
45° Tube Female JICSwivel
C5C, C5D & C5M Hose
P/Number....................Thread .......Hose6C5-6RFJX45.............9/16 ............5/1612C5-12RFJX45.........1-1/16 ...........5/816C5-16RFJX45.........1-5/16 ...........7/8
90° Tube Female JICSwivel
C5C, C5D & C5M Hose
P/Number....................Thread .......Hose6C5-6RFJX90.............9/16 ............5/1612C5-12RFJX90.........1-1/16 ...........5/816C5-16RFJX90.........1-5/16 ...........7/8
Straight Female JIC/SAEDual Seat Swivel
C5C, C5D & C5M Hose
P/Number................... Thread .......Hose4C5-4RFJSX.............. 7/16.............3/165C5-5RFJSX.............. 1/2.................1/48C5-8RFJSX.............. 3/4.............13/3210C5-10RFJSX.......... 7/8.................1/2
45° Tube Female JIC/SAEDual Seat Swivel
C5C, C5D & C5M Hose
P/Number................... Thread .......Hose4C5-4RFJSX45.......... 7/16.............3/16
* 5C5-5RFJSX45.......... 1/2.................1/48C5-8RFJSX45.......... 3/4.............13/3210C5-10RFJSX45...... 7/8.................1/2
90° Tube Female JIC/SAEDual Seat Swivel
C5C, C5D & C5M Hose
P/Number................... Thread .......Hose4C5-4RFJSX90.......... 7/16.............3/165C5-5RFJSX90.......... 1/2.................1/48C5-8RFJSX90.......... 3/4.............13/3210C5-10RFJSX90...... 7/8.................1/2
2.10 *Manufactured To Order - Minimum Order Quantities May Apply
Section 2Field-Fit / C5 Couplings
Straight Female SAESwivel
C5C, C5D & C5M Hose
P/Number................... Thread .......Hose6C5-6RFSX ............... 5/8...............5/1610C5-12RFSX ........... 1-1/16 ...........1/212C5-12RFSX ........... 1-1/16 ...........5/8
45° Tube Female SAESwivel
C5C, C5D & C5M Hose
P/Number................... Thread .......Hose6C5-6RFSX45 ........... 5/8...............5/1612C5-12RFSX45 ....... 5/8...............5/16
90° Tube Female SAESwivel
C5C, C5D & C5M Hose
P/Number................... Thread .......Hose6C5-6RFSX90 ........... 5/8...............5/1612C5-12RFSX90 ....... 1-1/16 ...........5/8
*Manufactured To Order - Minimum Order Quantities May Apply 2.11
Section 2Field-Fit / C5E Couplings
Effective Date 01/12/2008
Section 2Field-Fit / C5E Couplings
Straight Male NPTFC5E Hose
P/Number ...................Thread....... Hose4C5E-2RMP...............1/8 .............. 3/164C5E-4RMP...............1/4 .............. 3/165C5E-4RMP...............1/4 ................ 1/46C5E-6RMP...............3/8 .............. 5/168C5E-8RMP...............1/2 ............ 13/3210C5E-8RMP.............1/2 ................ 1/212C5E-12RMP...........3/4 ................ 5/812C5E-16RMP...........1 ................... 5/816C5E-16RMP...........1 ................... 7/8
Straight Female JICSwivel
C5E Hose
P/Number....................Thread .......Hose6C5E-6RFJX ..............9/16 ............5/1612C5E-12RFJX ..........1-1/16 ...........5/816C5E-16RFJX ..........1-5/16 ...........7/8
45° Tube Female JICSwivel
C5E Hose
P/Number....................Thread .......Hose* 6C5E-6RFJX45 ..........9/16 ............5/16* 12C5E-12RFJX45 ......1-1/16 ...........5/8
90° Tube Female JICSwivel
C5E Hose
P/Number....................Thread .......Hose6C5E-6RFJX90 ..........9/16 ............5/1612C5E-12RFJX90 ......1-1/16 ...........5/816C5E-16RFJX90 ......1-5/16 ...........7/8
Straight Female JIC/SAEDual Seat Swivel
C5E Hose
P/Number................... Thread .......Hose4C5E-4RFJSX ........... 7/16.............3/165C5E-5RFJSX ........... 1/2.................1/48C5E-8RFJSX ........... 3/4.............13/32
45° Tube Female JIC/SAEDual Seat Swivel
C5E Hose
P/Number................... Thread .......Hose4C5E-4RFJSX45 ....... 7/16.............3/168C5E-8RFJSX45 ....... 3/4.............13/3210C5E-10RFJSX45 ... 7/8.................1/2
90° Tube Female JIC/SAEDual Seat Swivel
C5E Hose
P/Number................... Thread .......Hose4C5E-4RFJSX90 ....... 7/16.............3/168C5E-8RFJSX90 ....... 3/4.............13/3210C5E-10RFJSX90 ... 7/8.................1/2
2.12 *Manufactured To Order - Minimum Order Quantities May Apply
Section 2Field-Fit / C5E Couplings
Straight Female SAESwivel
C5E Hose
P/Number................... Thread .......Hose6C5E-6RFSX............. 5/8...............5/16
45° Tube Female SAESwivel
C5E Hose
P/Number................... Thread .......Hose6C5E-6RFSX45......... 5/8...............5/16
90° Tube Female SAESwivel
C5E Hose
P/Number................... Thread .......Hose6C5E-6RFSX90......... 5/8...............5/16
Straight Male SAEInverted Flare
C5E Hose
P/Number................... Thread .......Hose4C5E-4RMIX ............ 7/16 ............3/165C5E-5RMIX ............ 1/2 ................1/46C5E-6RMIX ............ 5/8 ..............5/168C5E-8RMIX ............ 3/4 ............13/32
45° Tube Male SAEInverted Flare
C5E Hose
P/Number................... Thread .......Hose6C5E-6RMIX45 ........ 5/8 ..............5/168C5E-8RMIX45 ........ 3/4 ............13/32
90° Tube Male SAEInverted Flare
C5E Hose
P/Number................... Thread .......Hose4C5E-4RMIX90 ........ 7/16 ............3/165C5E-5RMIX90 ........ 1/2 ................1/46C5E-6RMIX90 ........ 5/8 ..............5/168C5E-8RMIX90 ........ 3/4 ............13/32
*Manufactured To Order - Minimum Order Quantities May Apply 2.13
Section 2Lock-On Couplings
Straight Male BSPTLOL/LOC Hose
P/Number ...................Thread....... HoseLMB-0204..................1/8 ................ 1/4LMB-0205..................1/8 .............. 5/16LMB-0404..................1/4 ................ 1/4LMB-0405..................1/4 .............. 5/16LMB-0406..................1/4 ................ 3/8LMB-0604..................3/8 ................ 1/4LMB-0606..................3/8 ................ 3/8LMB-0608..................3/8 ................ 1/2LMB-0806..................1/2 ................ 3/8LMB-0808..................1/2 ................ 1/2LMB-1212..................3/4 ................ 3/4
Straight Female BSPPSwivel
LOL/LOC Hose
P/Number ...................Thread....... HoseLFB-0204 ...................1/8 ................ 1/4LFB-0404 ...................1/4 ................ 1/4LFB-0405 ...................1/4 .............. 5/16LFB-0604 ...................3/8 ................ 1/4LFB-0606 ...................3/8 ................ 3/8LFB-0608 ...................3/8 ................ 1/2LFB-0806 ...................1/2 ................ 3/8LFB-0808 ...................1/2 ................ 1/2LFB-0810 ...................1/2 ................ 5/8LFB-1212 ...................3/4 ................ 3/4
90° Female BSPPSwivel
LOL/LOC Hose
P/Number....................Thread .......HoseLFB90C-0404.............1/4 ................1/4LFB90C-0405.............1/4 ..............5/16
* LFB90C-0604.............3/8 ................1/4LFB90C-0606.............3/8 ................3/8LFB90C-0808.............1/2 ................1/2LFB90C-1212.............3/4 ................3/4
Straight Male NPTFLOL/LOC Hose
P/Number....................Thread .......HoseLMN-0204..................1/8 ................1/4LMN-0205..................1/8 ..............5/16
* LMN-0404..................1/4 ................1/4* LMN-0406..................1/4 ................3/8* LMN-0606..................3/8 ................3/8* LMN-0808..................1/2 ................1/2
Straight Male JICLOL/LOC Hose
P/Number....................Thread .......HoseLMJ-0704 ...................7/16 ..............1/4LMJ-0804 ...................1/2 ................1/4LMJ-0904 ...................9/16 ..............1/4
* LMJ-0906 ...................9/16 ..............3/8* LMJ-1206 ...................3/4 ................3/8* LMJ-1208 ...................3/4 ................1/2* LMJ-1408 ...................7/8 ................1/2* LMJ-1410 ...................7/8 ................5/8* LMJ-1712 ...................1-1/16 ...........3/4
Straight Male SAELOL/LOC Hose
P/Number................... Thread .......HoseLMS-0704.................. 7/16...............1/4LMS-0806.................. 1/2.................3/8
Straight Female JICLOL/LOC Hose
P/Number................... Thread .......HoseLFJ-0904.................... 9/16...............1/4LFJ-0906.................... 9/16...............3/8LFJ-1212.................... 3/4.................3/4LFJ-1712.................... 1-1/16 ...........3/4
Straight Female JIC/SAEDual Seat SwivelLOL/LOC Hose
P/Number................... Thread .......HoseLFJS-0704.................. 7/16...............1/4LFJS-0804.................. 1/2.................1/4LFJS-0805.................. 1/2...............5/16LFJS-1206.................. 3/4.................3/8LFJS-1208.................. 3/4.................1/2LFJS-1408.................. 7/8.................1/2LFJS-1410.................. 7/8.................5/8
2.14 *Manufactured To Order - Minimum Order Quantities May Apply
Section 2Lock-On Couplings
90° Tube Female JICSwivel
LOL/LOC Hose
P/Number................... Thread .......HoseLFJ90-0906................ 9/16...............3/8LFJ90-1206................ 3/4.................3/8LFJ90-1208................ 3/4.................1/2LFJ90-1408................ 7/8.................1/2LFJ90-1712................ 1-1/16 ...........3/4
90° Close Female JICSwivel
LOL/LOC Hose
P/Number................... Thread .......HoseLFJ90C-0704 ............. 7/16...............1/4LFJ90C-0904 ............. 9/16...............1/4LFJ90C-0906 ............. 9/16...............3/8LFJ90C-1206 ............. 3/4.................3/8LFJ90C-1208 ............. 3/4.................1/2LFJ90C-1712 ............. 1-1/16 ...........3/4
Straight Female SAELOL/LOC Hose
P/Number................... Hose...........HoseLFS-1006 ................... 5/8.................3/8
Straight Male SAEInverted Flare
LOL/LOC Hose
P/Number................... Thread .......HoseLMIX-0704................ 7/16 ..............1/4
* LMIX-0804................ 1/2 ................1/4LMIX-1006................ 5/8 ................3/8
Standpipe LOL/LOC Hose
P/Number................... Hose ..........Hose* LSP-0404 ................... 1/4 ................1/4
LSP-0504 ................... 5/16 ..............1/4* LSP-0606 ................... 3/8 ................3/8* LSP-0808 ................... 1/2 ................1/2
LSP-15M08 ............... 15mm ...........1/2
Hose JoinerLOL/LOC Hose
P/Number................... Hose ..........HoseLHJ-0404 ................... 1/4 ................1/4LHJ-0505 ................... 5/16 ............5/16LHJ-0606 ................... 3/8 ................3/8LHJ-0806 ................... 1/2 ................3/8LHJ-0808 ................... 1/2 ................1/2LHJ-1010 ................... 5/8 ................5/8LHJ-1212 ................... 3/4 ................3/4
*Manufactured To Order - Minimum Order Quantities May Apply 2.15
Section 2Clamp-On Suction Hose Tails
Clamp-on Hosetail M/MBSPT x Tail
P/Number ............... Thread .......... HoseCB4-0404 ............... 1/4.................... 1/4CB4-0406 ............... 1/4.................... 3/8CB4-0408 ............... 1/4.................... 1/2CB4-0604 ............... 3/8.................... 1/4CB4-0606 ............... 3/8.................... 3/8CB4-0608 ............... 3/8.................... 1/2CB4-0610 ............... 3/8.................... 5/8CB4-0806 ............... 1/2.................... 3/8CB4-0808 ............... 1/2.................... 1/2CB4-0810 ............... 1/2................... 5/8CB4-0812 ............... 1/2.................... 3/4CB4-0816 ............... 1/2....................... 1CB4-1212 ............... 3/4.................... 3/4CB4-1216 ............... 3/4....................... 1CB4-1220 ............... 3/4.................1-1/4CB4-1612 ............... 1....................... 3/4CB4-1616 ............... 1.......................... 1CB4-1620 ............... 1....................1-1/4CB4-1624 ............... 1....................1-1/2CB4-2016 ............... 1-1/4 ................... 1CB4-2020 ............... 1-1/4 .............1-1/4CB4-2024 ............... 1-1/4 .............1-1/2CB4-2420 ............... 1-1/2 .............1-1/4CB4-2424 ............... 1-1/2 .............1-1/2CB4-2432 ............... 1-1/2 ................... 2CB4-3232 ............... 2.......................... 2
* CB4-3240 ............... 2....................2-1/2* CB4-4040 ............... 2-1/2 .............2-1/2
Clamp-on Hosetail M/MBSPP x Tail
P/Number................Thread...........HoseCP4-0612................ 3/8 ....................3/4CP4-0812................ 1/2 ....................3/4CP4-0816................ 1/2 ....................... 1CP4-0820................ 1/2 .................1-1/4CP4-1212................ 3/4 ....................3/4CP4-1216................ 3/4 ....................... 1CP4-1220................ 3/4 .................1-1/4CP4-1224................ 3/4 .................1-1/2CP4-1616................ 1 .......................... 1CP4-1620................ 1 ....................1-1/4CP4-1624................ 1 ....................1-1/2CP4-2016................ 1-1/4.................... 1CP4-2020................ 1-1/4..............1-1/4CP4-2024................ 1-1/4..............1-1/2CP4-2424................ 1-1/2..............1-1/2CP4-2032................ 1-1/4.................... 2CP4-2432................ 1-1/2.................... 2CP4-3232................ 2 .......................... 2
Clamp-on Hosetail M/MMetric x Tail
P/Number................Thread...........HoseCM4-3316 ..............M33 .................... 1CM4-3324 ..............M33 ..............1-1/2
Clamp-on Hosetail M/MNPTF x Tail
P/Number................Thread ...........HoseCN4-0404 ...............1/4 ....................1/4CN4-0406 ...............1/4 ....................3/8CN4-0606 ...............3/8 ....................3/8CN4-0608 ...............3/8 ....................1/2CN4-0610 ...............3/8 ....................5/8
* CN4-0808 ...............1/2 ....................1/2CN4-0810 ...............1/2 ................... 5/8CN4-1212 ...............3/4 ....................3/4CN4-1216 ...............3/4 .......................1CN4-1616 ...............1 ..........................1CN4-1620 ...............1 ................... 1-1/4CN4-1624 ...............1 ................... 1-1/2CN4-1626 ...............1 ................... 1-5/8CN4-2020 ...............1-1/4............. 1-1/4CN4-2024 ...............1-1/4............. 1-1/2CN4-2416 ...............1-1/2....................1CN4-2420 ...............1-1/2............. 1-1/4CN4-2424 ...............1-1/2............. 1-1/2CN4-2432 ...............1-1/2....................2CN4-3232 ...............2 ......................... 2
Clamp-on Hosetail M/MS.A.E. ‘O’ Ring Boss x Tail
P/Number................Thread ...........HoseC5-1208 ..................3/4 ....................1/2C5-1212 ..................3/4 ................... 3/4C5-1408 ..................7/8 ....................1/2C5-1412 ..................7/8 ................... 3/4C5-1420 ..................7/8 ................ 1-1/4
* C5-1712 ..................1-1/16...............3/4C5-1716 ..................1-1/16..................1C5-1720 ..................1-1/16........... 1-1/4
* C5-2112 ..................1-5/16.............. 3/4C5-2116 ..................1-5/16..................1C5-2120 ..................1-5/16........... 1-1/4C5-2124 ..................1-5/16........... 1-1/2C5-2620 ..................1-5/8............. 1-1/4C5-2624 ..................1-5/8............. 1-1/2C5-3024 ..................1-7/8............. 1-1/2
2.16 *Manufactured To Order - Minimum Order Quantities May Apply
Section 2Clamp-On Suction Hose Tails
Clamp-on Hosetail F/MBSPP x Tail
P/Number................Thread ...........HoseCB5-1212................3/4 ....................3/4CB5-1616................1 ..........................1CB5-2020................1-1/4............. 1-1/4
Clamp-on Hosetail45° Elbow. M/M
S.A.E. ‘O’ Ring Boss x Tail
P/Number................Thread ...........HoseC41-1212 ................3/4 ....................3/4
* C41-1408 ................7/8 ....................1/2C41-1716 ................1-1/16 ..................1
* C41-2116 ................1-5/16 ..................1* C41-2120 ................1-5/16 ........... 1-1/4* C41-2124 ................1-5/16 ........... 1-1/2* C41-2620 ................1-5/8 ............. 1-1/4* C41-2624 ................1-5/8 ............. 1-1/2
Clamp-on Hosetail45° Elbow. M/M
BSPT x Tail
P/Number................Thread ...........HoseCB41-0808..............1/2 ....................1/2CB41-1212..............3/4 ....................3/4CB41-1216..............3/4 .......................1CB41-1616..............1 ..........................1CB41-1620..............1 ................... 1-1/4CB41-2020..............1-1/4............. 1-1/4CB41-2024..............1-1/4............. 1-1/2
Clamp-on Hosetail45° Elbow. M/M
NPTF x Tail
P/Number................Thread...........Hose* CN41-0608 .............1/2 ....................3/4* CN41-0812 .............1/2 ....................3/4
CN41-1212 .............3/4 ....................3/4CN41-1216 .............3/4 .......................1CN41-1220 .............3/4 ................ 1-1/4CN41-1616 .............1 ..........................1CN41-1620 .............1 ................... 1-1/4
* CN41-2020 .............1-1/4............. 1-1/4
Clamp-on Hosetail90° Elbow M/M
S.A.E. ‘O’ Ring Boss x Tail
P/Number................Thread...........Hose* C60-0905 ................9/16 ................5/16* C60-0908 ................9/16 ..................1/2
C60-1208 ................3/4 ....................1/2C60-1210 ................3/4 ....................5/8C60-1212 ................3/4 ....................3/4C60-1412 ................7/8 ...................3/4
* C60-1416 ................7/8 .......................1C60-1420 ................7/8 ................ 1-1/4
* C60-1710 ................1-1/16...............5/8C60-1712 ................1-1/16 ..............3/4C60-1716 ................1-1/16 .................1C60-1720 ................1-1/16 .......... 1-1/4C60-2112 ................1-5/16...............3/4C60-2116 ................1-5/16..................1C60-2120 ................1-5/16........... 1-1/4C60-2124 ................1-5/16........... 1-1/2C60-2620 ................1-5/8............. 1-1/4C60-2624 ................1-5/8............. 1-1/2C60-3024 ................1-7/8............. 1-1/2
Clamp-on Hosetail90° Elbow M/M
BSPT x Tail
P/Number ............... Thread .......... HoseCB60-0204 ............. 1/8.................... 1/4CB60-0405 ............. 1/4.................. 5/16CB60-0406 ............. 1/4.................... 3/8
* CB60-0608 ............. 3/8.................... 1/2CB60-0610 ............. 3/8.................... 5/8CB60-0612 ............. 3/8.................... 3/4CB60-0806 ............. 1/2.................... 3/8CB60-0808 ............. 1/2.................... 1/2CB60-0812 ............. 1/2.................... 3/4CB60-1212 ............. 3/4.................... 3/4CB60-1216 ............. 3/4....................... 1CB60-1220 ............. 3/4.................1-1/4CB60-1612 ............. 1....................... 3/4CB60-1616 ............. 1.......................... 1CB60-1620 ............. 1....................1-1/4CB60-1624 ............. 1....................1-1/2CB60-2016 ............. 1-1/4 ................... 1CB60-2020 ............. 1-1/4 .............1-1/4CB60-2024 ............. 1-1/4 .............1-1/2CB60-2420 ............. 1-1/2 .............1-1/4CB60-2424 ............. 1-1/2 .............1-1/2CB60-2432 ............. 1-1/2 .............1-1/2CB60-3232 ............. 2.......................... 2
*Manufactured To Order - Minimum Order Quantities May Apply 2.17
Section 2Clamp-On Suction Hose Tails
Clamp-on Hosetail90° Elbow M/M
BSPP x Tail
P/Number ............... Thread .......... HoseCP60-0608 ............. 3/8.................... 1/2CP60-0612 ............. 3/8.................... 3/4CP60-0812 ............. 1/2................... 3/4CP60-0816 ............. 1/2...................... 1CP60-1212 ............. 3/4.................... 3/4CP60-1216 ............. 3/4....................... 1CP60-1220 ............. 3/4.................1-1/4CP60-1616 ............. 1.......................... 1CP60-1620 ............. 1....................1-1/4CP60-1624 ............. 1....................1-1/2CP60-1632 ............. 1....................1-1/2CP60-2016 ............. 1-1/4 ................... 1CP60-2020 ............. 1-1/4 .............1-1/4CP60-2024 ............. 1-1/4 .............1-1/2CP60-2032 ............. 1-1/4 ................... 2CP60-2424 ............. 1-1/2 .............1-1/2CP60-2432 ............. 1-1/2 .................. 2
Clamp-on Hosetail90° Elbow M/M
NPTF x Tail
P/Number................ Thread...........HoseCN60-0404 ............. 1/4 ....................1/4CN60-0406 ............. 1/4 ....................3/8CN60-0408 ............. 1/4 ....................1/2CN60-0410 ............. 1/4 ....................5/8CN60-0606 ............. 3/8 ....................3/8CN60-0608 ............. 3/8 ....................1/2CN60-0610 ............. 3/8 ....................5/8CN60-0612 ............. 3/8 ....................3/4CN60-0808 ............. 1/2 ....................1/2CN60-0812 ............. 1/2 ................... 3/4
* CN60-1212 ............. 3/4 ....................3/4CN60-1216 ............. 3/4 ....................... 1
* CN60-1612 ............. 1 .......................3/4CN60-1616 ............. 1 .......................... 1
* CN60-1620 ............. 1 ....................1-1/4* CN60-1624 ............. 1 ....................1-1/2* CN60-2016 ............. 1-1/4.................... 1
CN60-2020 ............. 1-1/4..............1-1/4CN60-2024 ............. 1-1/4..............1-1/2CN60-2424 ............. 1-1/2..............1-1/2
Contents
Part No. ................. Description...........................................................................................................................Page
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 3.1
Section 3Permanent Couplings
SUPER-CRIMP TWO PIECE COUPLINGSTo suit Gates hose types: EFG4K, C12M, C12H, CPB+, M3K, M2T,G2, G2H, J2AT, G1, C5C,C5E, C3, C3H, GMV, GT7, GT8,C12-MTF, M3K-MTF, M2T-MTF and J2AT-MTF.
FNP........................Ferrule to suit G1 and G2 Hose; Non Skive ........................................................................ 3.7FN3P......................Ferrule to suit M3K Hose; Non Skive .................................................................................3.7FN4P......................Ferrule to suit M4K Hose; Non Skive .................................................................................3.7FSP ........................Ferrule to suit C5C, C5E, GMV, C3H & TH7 Hose; Skive & Non-Skive .........................3.7FNM2P ..................Ferrule to suit M2T Hose; Non Skive .................................................................................3.7FNT........................Ferrule to suit AFX2000 series Teflon hose........................................................................ 3.7FNS........................Ferrule to suit C12 & EFG4K Hose; Non Skive .................................................................3.7FSS ........................Ferrule to suit C12 Hose; Skive........................................................................................... 3.7
SMB.......................Straight Male BSPT.............................................................................................................3.8SMBX....................Straight Male BSPT Swivel................................................................................................. 3.8SMBX90C .............90° Close Male BSPT Swivel.............................................................................................. 3.8
SFB ........................Straight Female BSPP Swivel .............................................................................................3.8SFB45 ....................45° Tube Style Female BSPP Swivel ..................................................................................3.8SFB90 ....................90° Tube Style Female BSPP Swivel ..................................................................................3.8SFB90C .................90° Close Female BSPP Swivel ..........................................................................................3.8SFBZ......................Straight Female Flat face BSPP Swivel ..............................................................................3.8
SMJ........................Straight Male J.I.C...............................................................................................................3.9SFJ .........................Straight Female J.I.C. Swivel .............................................................................................. 3.9SFJ45 .....................45° Tube Style Female J.I.C. Swivel................................................................................... 3.9SFJ45C ..................45° Close Female J.I.C. Swivel ........................................................................................... 3.9SFJ90 .....................90° Tube Style Female J.I.C. Swivel................................................................................... 3.9SFJ90L...................90° Tube Style Female J.I.C. Long Swivel .........................................................................3.9SFJ90C ..................90° Close Style Female J.I.C. Swivel ..................................................................................3.10
SMORF..................Straight Male ORFS ............................................................................................................ 3.10SFFO......................Straight Female Flat Face O-Ring (ORFS) Swivel .............................................................3.10SFFO45..................45° Tube Female Flat Face O-Ring (ORFS) Swivel ...........................................................3.10SFFO90S ...............90° Tube Style Female Flat Face O-Ring (ORFS) Short Drop Swivel ...............................3.10SFFO90L ...............90° Tube Style Female Flat Face O-Ring (ORFS) Long Drop Swivel ...............................3.10SFNP......................Straight Female BSPP JAPANESE JIS B8363 Swivel 30° Cone Seat ...............................3.10SFK........................Straight Female METRIC JAPANESE JIS B8363 Swivel 30° Cone Seat .........................3.10SFK45....................45° Female METRIC JAPANESE JIS B8363 Swivel 30° Cone Seat ................................ 3.10SFK90....................90° Female METRIC JAPANESE JIS B8363 Swivel 30° Cone Seat ................................ 3.11
SMN ......................Straight Male N.P.T.F.......................................................................................................... 3.11SMNL ....................Straight Male N.P.T.F. Long Series ....................................................................................3.11SFNF......................Straight Female N.P.T.F. Fixed ........................................................................................... 3.11
SHJ ........................Hose Joiner .......................................................................................................................... 3.11SLS ........................Lifesaver Hose End .............................................................................................................3.11SMOX....................Straight Male S.A.E. O-Ring Boss Swivel (U.N. O-Ring) ................................................. 3.11SMOX90C.............90° Male S.A.E. O-Ring Boss Swivel (U.N. O-Ring)......................................................... 3.11SFS ........................Straight Female S.A.E. Swivel ............................................................................................3.11SFS90 ....................90° Female S.A.E. Swivel ...................................................................................................3.11SMIX .....................Straight Male S.A.E. INVERTED FLARE Swivel .............................................................3.12SMIX45 .................45° Tube Style Male S.A.E. INVERTED FLARE Swivel..................................................3.12
3.2 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Contents
Part No. ................. Description .......................................................................................................................... Page
Section 3Permanent Couplings
SUPER-CRIMP TWO PIECE COUPLINGS Cont’dSMIX90 .................90° Tube Style Male S.A.E. INVERTED FLARE Swivel ..................................................3.12
SFDKO ..................Straight Female DIN Heavy Series O-Ring Seal Swivel.....................................................3.12SFDKO45 ..............45° Female DIN Heavy Series O-Ring Seal Swivel............................................................3.12SFDKO90 ..............90° Female DIN Heavy Series O-Ring Seal Swivel............................................................3.12SMDKS..................Straight Male DIN Heavy Series .........................................................................................3.12SFDKL...................Straight Female DIN Light Series Universal Cone Seat 24°/60° Swivel ............................3.13SFDKL45...............45° Tube Style Female DIN Light Series Universal Cone Seat 24°/60° Swivel Swivel.....3.13SFDKL90...............90° Tube Style Female DIN Light Series Universal Cone Seat 24°/60° Swivel Swivel.....3.13SMDKL .................Straight Male DIN Light Series ...........................................................................................3.13SMGAZ .................Straight Male French Series.................................................................................................3.13SFGAZ...................Straight Female French Series .............................................................................................3.13
SSS.........................Straight Male STAPLE LOCK System ...............................................................................3.14
HAMMER-CRIMP TWO PIECE COUPLINGSFNH .......................Ferrule to suit EFG4K Non Skive; Hammer-Crimp............................................................3.14HFB........................Straight Female Hammer Coupling .....................................................................................3.14
SUPER-CRIMP TWO PIECE COUPLINGSSFL ........................Straight S.A.E. O-Ring Flange Code 61..............................................................................3.15SFLK......................Straight Komatsu O-Ring Flange ........................................................................................3.15SFL22 ....................22-1/2° S.A.E. O-Ring Flange Code 61...............................................................................3.15SFL30 ....................30° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFL45 ....................45° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFLK45..................45° Komatsu O-Ring Flange................................................................................................3.15SFL60 ....................60° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFL67 ....................67° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFL90 ....................90° S.A.E. O-Ring Flange Code 61 .....................................................................................3.16SFLK90..................90° Komatsu O-Ring Flange................................................................................................3.16SFL90L ..................90° S.A.E. O-Ring Flange Long Drop Code 61 ..................................................................3.16SFL110 ..................110° S.A.E. O-Ring Flange Code 61 ...................................................................................3.16SFL135 ..................135° S.A.E. O-Ring Flange Code 61 ...................................................................................3.16SFLH......................Straight S.A.E. O-Ring Flange Code 62..............................................................................3.16SFLH45..................45° S.A.E. O-Ring Flange Code 62 .....................................................................................3.16SFLH90..................90° S.A.E. O-Ring Flange Code 62 .....................................................................................3.16
EZI-CRIMP ONE PIECE COUPLINGSEMB.......................Straight Male BSPT .............................................................................................................3.17EMR.......................Straight Male BSP.P Encapsulated Seal ..............................................................................3.17EFB ........................Straight Female BSPP Swivel..............................................................................................3.17EFB90 ....................90° Tube Style Female BSPP Swivel ..................................................................................3.17EFB90C .................90° Close Female BSPP Swivel...........................................................................................3.17EMNL ....................Straight Male NPT (suit Porta-Power hoses).......................................................................3.17EMJ........................Straight Male J.I.C. ..............................................................................................................3.17EFJ .........................Straight Female J.I.C. Swivel ..............................................................................................3.17EFJ45 .....................45° Close Female J.I.C. Swivel ...........................................................................................3.17EFJ90 .....................90° Tube Style Female J.I.C. Swivel ...................................................................................3.17EFJ90L...................90° Tube Style Female J.I.C. Swivel Long Drop ................................................................3.18EFJ90C ..................90° Close Style Female J.I.C. Swivel ..................................................................................3.18
Contents
Part No. ................. Description...........................................................................................................................Page
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 3.3
Section 3Permanent Couplings
EZI-CRIMP ONE PIECE COUPLINGS Cont’dEFFO .....................Straight Female Flat Face O-Ring (ORFS) Swivel .............................................................3.18EFFO45 .................45° Tube Style Female Flat Face O-Ring (ORFS) Swivel ..................................................3.18EFFO90 .................90° Tube Style Female Flat Face O-Ring (ORFS) Swivel ..................................................3.18
GLOBAL-CRIMP GS & GSP TWO PIECE COUPLINGSGS1F......................Global Spiral Ferrules (Non-Skive).....................................................................................3.19MB.........................Male O-Ring Boss ............................................................................................................... 3.19MP .........................Male Pipe NPTF 30° Cone Seat ..........................................................................................3.19MBSPP ..................Male British Standard Pipe Parallel.....................................................................................3.19FBSPORX .............Female British Standard Pipe Parallel O-Ring Swivel ........................................................3.19FBSPORX45 .........Female British Standard Pipe Parallel O-Ring Swivel 45° Bent Tube................................ 3.19FBSPORX90 .........Female British Standard Pipe Parallel O-Ring Swivel 90° Bent Tube................................ 3.19
MJ ..........................Male JIC 37° Flare............................................................................................................... 3.19FJX ........................Female JIC 37° Flare Swivel ...............................................................................................3.20FJX45 ....................Female JIC 37° Flare Swivel 45° Bent Tube....................................................................... 3.20FJX90 ....................Female JIC 37° Flare Swivel 90° Bent Tube....................................................................... 3.20
MFFOR..................Male Flat Face O-Ring ........................................................................................................3.20FFORX ..................Female Flat Face Swivel...................................................................................................... 3.20FFORX45 ..............Female Flat Face Swivel 45° Bent Tube ............................................................................. 3.20FFORX90 ..............Female Flat Face Swivel 90° Bent Tube ............................................................................. 3.21
MDH......................Male 24° Cone Heavy Series...............................................................................................3.21FDHORX...............Female DIN 24° Cone Swivel Heavy Series With O-Ring ................................................. 3.21FDHORX45...........Female DIN 24° Cone Swivel Heavy Series With O-Ring 45° Bent Tube.........................3.21FDHORX90...........Female DIN 24° Cone Swivel Heavy Series With O-Ring 90° Bent Tube.........................3.21
FL ..........................Code 61 O-Ring Flange ....................................................................................................... 3.22FL22 ......................Code 61 O-Ring Flange 22.5° Bent Tube............................................................................3.22FL30 ......................Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.22FL45 ......................Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.22FL60 ......................Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.22FL67 ......................Code 61 O-Ring Flange 67.5° Bent Tube............................................................................3.22FL90 ......................Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.22FL110 ....................Code 61 O-Ring Flange 110° Bent Tube............................................................................. 3.22
FLH........................Code 62 O-Ring Flange Heavy ........................................................................................... 3.23FLH22....................Code 62 O-Ring Flange Heavy 22.5° Bent Tube ................................................................3.23FLH30....................Code 62 O-Ring Flange Heavy 30° Bent Tube ...................................................................3.23FLH45....................Code 62 O-Ring Flange Heavy 45° Bent Tube ...................................................................3.23FLH60....................Code 62 O-Ring Flange Heavy 60° Bent Tube ...................................................................3.23FLH90....................Code 62 O-Ring Flange Heavy 90° Bent Tube ...................................................................3.23
FLC........................Caterpillar Style O-Ring Flange ..........................................................................................3.24FLC22....................Caterpillar Style O-Ring Flange 22.5° Bent Tube............................................................... 3.24FLC30....................Caterpillar Style O-Ring Flange 30° Bent Tube.................................................................. 3.24FLC45....................Caterpillar Style O-Ring Flange 45° Bent Tube.................................................................. 3.24FLC60....................Caterpillar Style O-Ring Flange 60° Bent Tube.................................................................. 3.24FLC67....................Caterpillar Style O-Ring Flange 67.5° Bent Tube............................................................... 3.24FLC90....................Caterpillar Style O-Ring Flange 90° Bent Tube.................................................................. 3.24
3.4 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Contents
Part No. ................. Description .......................................................................................................................... Page
Section 3Permanent Couplings
GLOBAL-CRIMP GSH ONE PIECE COUPLINGSGSM-MP................Male Pipe NPTF 30° Cone Seat ..........................................................................................3.25GSM-MJ ................Male JIC 37° Flare...............................................................................................................3.25
GSM-FJX...............Female JIC 37° Flare Swivel ...............................................................................................3.25GSM-FJX45...........Female JIC 37° Flare Swivel 45° Bent Tube.......................................................................3.25GSM-FJX90...........Female JIC 37° Flare Swivel 90° Bent Tube.......................................................................3.25
GSM-FBSPORX....Female BSPP Swivel ...........................................................................................................3.25GSM-FFORX ........Female Flat Face Swivel (4000psi limited) .........................................................................3.25GSM-FFORX45 ....Female Flat Face Swivel 45° Bent Tube (4000psi limited).................................................3.25GSM-FFORX90 ....Female Flat Face Swivel 90° Bent Tube (4000psi limited).................................................3.25
GSM-FDHORX.....Female DIN 24° Cone Swivel Heavy Series with O-Ring ..................................................3.25GSM-FDHORX45.Female DIN 24° Cone Swivel Heavy Series with O-Ring 45° Bent Tube..........................3.25GSM-FDHORX90.Female DIN 24° Cone Swivel Heavy Series with O-Ring 90° Bent Tube..........................3.25
GSM-FL.................Code 61 O-Ring Flange .......................................................................................................3.26GSM-FL30.............Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.26GSM-FL45.............Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.26GSM-FL60.............Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.26GSM-FL90.............Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.26
GSM-FLH..............Code 62 O-Ring Flange Heavy............................................................................................3.26GSM-FLH22..........Code 62 O-Ring Flange Heavy 22.5° Bent Tube ................................................................3.23GSM-FLH30..........Code 62 O-Ring Flange Heavy 30° Bent Tube ...................................................................3.26GSM-FLH45..........Code 62 O-Ring Flange Heavy 45° Bent Tube ...................................................................3.26GSM-FLH60..........Code 62 O-Ring Flange Heavy 60° Bent Tube ...................................................................3.26GSM-FLH90..........Code 62 O-Ring Flange Heavy 90° Bent Tube ...................................................................3.26
GSM-FLC ..............Caterpillar Style O-Ring Flange ..........................................................................................3.27GSM-FLC22 ..........Caterpillar Style O-Ring Flange 22.5° Bent Tube...............................................................3.27GSM-FLC30 ..........Caterpillar Style O-Ring Flange 30° Bent Tube..................................................................3.27GSM-FLC45 ..........Caterpillar Style O-Ring Flange 45° Bent Tube..................................................................3.27GSM-FLC60 ..........Caterpillar Style O-Ring Flange 60° Bent Tube..................................................................3.27GSM-FLC90 ..........Caterpillar Style O-Ring Flange 90° Bent Tube..................................................................3.27
Contents
Part No. ................. Description...........................................................................................................................Page
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 3.5
Section 3Permanent Couplings
MAXI-CRIMP PCM TWO PIECE COUPLINGSPCM.......................Ferrule PCM (Skiving Required) ........................................................................................ 3.28MP .........................Male Pipe NPTF 30° Cone Seat ..........................................................................................3.28MJ ..........................Male JIC 37° Flare............................................................................................................... 3.28FJX ........................Female JIC 37° Flare Swivel ...............................................................................................3.28FJX90 ....................Female JIC 37° Flare Swivel 90° Bent Tube....................................................................... 3.28FFORX ..................Female Flat Face Swivel...................................................................................................... 3.28FFORX90 ..............Female Flat Face Swivel 90° Bent Tube ............................................................................. 3.28
FL ..........................Code 61 O-Ring Flange ....................................................................................................... 3.28FL30 ......................Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.28FL45 ......................Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.28FL60 ......................Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.28FL90 ......................Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.28
FLH........................Code 62 O-Ring Flange Heavy ........................................................................................... 3.29FLH22....................Code 62 O-Ring Flange Heavy 22.5° Bent Tube ................................................................3.29FLH30....................Code 62 O-Ring Flange Heavy 30° Bent Tube ...................................................................3.29FLH45....................Code 62 O-Ring Flange Heavy 45° Bent Tube ...................................................................3.29FLH60....................Code 62 O-Ring Flange Heavy 60° Bent Tube ...................................................................3.29FLH90....................Code 62 O-Ring Flange Heavy 90° Bent Tube ...................................................................3.29
FLC........................Caterpillar Style O-Ring Flange ..........................................................................................3.29FLC22....................Caterpillar Style O-Ring Flange 22.5° Bent Tube............................................................... 3.29FLC30....................Caterpillar Style O-Ring Flange 30° Bent Tube.................................................................. 3.29FLC45....................Caterpillar Style O-Ring Flange 45° Bent Tube.................................................................. 3.29FLC60....................Caterpillar Style O-Ring Flange 60° Bent Tube.................................................................. 3.29FLC90....................Caterpillar Style O-Ring Flange 90° Bent Tube.................................................................. 3.29
VACU-CRIMP GL ONE PIECE COUPLINGSFL ..........................Code 61 O-Ring Flange ....................................................................................................... 3.30FL22 ......................Code 61 O-Ring Flange 22.5° Bent Tube............................................................................3.30FL30 ......................Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.30FL45 ......................Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.30FL60 ......................Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.30FL67 ......................Code 61 O-Ring Flange 67.5° Bent Tube............................................................................3.30FL90 ......................Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.30
3.6 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Contents
Part No. ................. Description .......................................................................................................................... Page
Section 3Permanent Couplings
THIS PAGE INTENTIONALLY LEFT (MOSTLY) BLANK
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.7
Section 3Super-Crimp Couplings - Two Piece
Super-Crimp FerruleNon Skive
Suits G2, G2H, G2XH, J2AT, G1,C5C, C5E,
GMV
P/Number ................... .................. HoseFNP-03 ....................... ................... 3/16FNP-04 ....................... ..................... 1/4FNP-05 ....................... ................... 5/16FNP-06 ....................... ..................... 3/8FNP-08 ....................... ..................... 1/2FNP-10 ....................... ..................... 5/8FNP-12 ....................... ..................... 3/4FNP-16 ....................... ........................ 1FNP-20 ....................... ..................1-1/4FNP-24 ....................... ..................1-1/2FNP-32 ....................... ........................ 2
Super-Crimp FerruleNon Skive
Suits M3K, M3K-XTF &M3K-MTF
P/Number ................... .................. HoseFN3P-04 ..................... ..................... 1/4FN3P-06 ..................... ..................... 3/8FN3P-08 ..................... ..................... 1/2FNP-10 ....................... ..................... 5/8FNP-12 ....................... ..................... 3/4FNS-16 ....................... ........................ 1
Super-Crimp FerruleNon SkiveSuits M4K
P/Number ................... .................. HoseFN4P-04 ..................... ..................... 1/4FN4P-06 ..................... ..................... 3/8FNP-08 ....................... ..................... 1/2FNS-12 ....................... ..................... 3/4
Super-Crimp FerruleSkive & Non Skive Hose
Suits C5C, C5E,GMV, C3H & TH7
P/Number.................... ..................Hose FSP-204 ...................... .....................1/4* FSP-205 ...................... ...................5/16 FSP-206A ................... .....................3/8 FSP-206 ...................... .....................3/8
FSP-208 ...................... .....................1/2 FSP-210 ...................... .....................5/8
FSP-212 ...................... .....................3/4FSP-216 ...................... ........................ 1
FSP-220 ...................... ..................1-1/4 FSP-424 ...................... ..................1-1/2 FSP-432 ...................... ........................ 2
Super-Crimp FerruleNon Skive
Suits M2T & M2T-MTF
P/Number.................... ..................HoseFNP-03 (suits 1/4" bore) ..................1/4FNM2P-06.................. .....................3/8FNM2P-08.................. .....................1/2FNM2P-10.................. .....................5/8FNM2P-12.................. .....................3/4FNM2P-16.................. ........................ 1
Super-Crimp FerruleNon Skive
Suits AFX2000 SeriesTeflon Hose
P/Number.................... ..................HoseFNT-04 ....................... .....................1/4FNT-06 ....................... .....................3/8FNT-08 ....................... .....................1/2FNT-10 ....................... .....................5/8FNT-12 ....................... .....................3/4FNT-16 ....................... ........................ 1
Super-Crimp FerruleNon Skive
Suits C12M, C12, C12-MTF& EFG4K
P/Number................... ...................HoseFNS-06....................... ......................3/8FNS-08....................... ......................1/2FNS-10....................... ....................5/16FNS-12....................... ......................3/4FNS-16....................... .........................1FNS-20....................... .................. 1-1/4FNS-24....................... .................. 1-1/2FNS-32....................... .........................2
Super-Crimp FerruleSkive
Suits C12M, C12 & C12-MTF
P/Number................... ...................HoseFSS-06 ....................... ......................3/8FSS-08 ....................... ......................1/2FSS-12 ....................... ......................3/4FSS-16 ....................... .........................1FSS-20 ....................... .................. 1-1/4FSS-24 ....................... .................. 1-1/2FSS-32 ....................... .........................2
3.8 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 3Super-Crimp Couplings - Two Piece
Straight Male BSPT
P/Number................... Thread .......HoseSMB-0204.................. 1/8.................1/4SMB-0404.................. 1/4.................1/4SMB-0406.................. 1/4.................3/8SMB-0604.................. 3/8.................1/4SMB-0606.................. 3/8.................3/8SMB-0608.................. 3/8.................1/2SMB-0806.................. 1/2.................3/8SMB-0808.................. 1/2.................1/2SMB-1010.................. 5/8.................5/8SMB-1208.................. 3/4.................1/2SMB-1210.................. 3/4.................5/8SMB-1212.................. 3/4.................3/4SMB-1612.................. 1....................3/4SMB-1616.................. 1.......................1SMB-2020.................. 1-1/4 ......... 1-1/4SMB-2424.................. 1-1/2 ......... 1-1/2SMB-3232.................. 2.......................2
Straight Male BSPTSwivel
P/Number................... Thread .......HoseSMBX-0404............... 1/4.................1/4SMBX-0604............... 3/8.................1/4SMBX-0606............... 3/8.................3/8SMBX-0806............... 1/2.................3/8SMBX-0808............... 1/2.................1/2
90° Close Male BSPTSwivel
P/Number................... Thread .......Hose* SMBX90C-0606 ........ 3/8.................3/8
SMBX90C-0806 ........ 1/2.................3/8SMBX90C-0808 ........ 1/2.................1/2
Straight Female BSPPSwivel
P/Number ...................Thread....... HoseSFB-0204 ................... 1/8 ................ 1/4SFB-0404 ................... 1/4 ................ 1/4SFB-0406 ................... 1/4 ................ 3/8SFB-0604 ................... 3/8 ................ 1/4SFB-0606 ................... 3/8 ................ 3/8SFB-0608 ................... 3/8 ................ 1/2SFB-0806 ................... 1/2 ................ 3/8SFB-0808 ................... 1/2 ................ 1/2SFB-1010 ................... 5/8 ................ 5/8SFB-1208 ................... 3/4 ................ 1/2SFB-1212 ................... 3/4 ................ 3/4SFB-1612 ................... 1 ................... 3/4SFB-1616 ................... 1 ...................... 1SFB-1620 ................... 1 ................ 1-1/4SFB-2016 ................... 1-1/4................ 1SFB-2020 ................... 1-1/4.......... 1-1/4SFB-2424 ................... 1-1/2.......... 1-1/2SFB-3232 ................... 2 ...................... 2
45° Tube Female BSPPSwivel
P/Number ...................Thread....... HoseSFB45-0404 ...............1/4 ................ 1/4SFB45-0606 ...............3/8 ................ 3/8SFB45-0806 ...............1/2 ................ 3/8SFB45-0808 ...............1/2 ................ 1/2SFB45-1010 ...............5/8 ................ 5/8SFB45-1212 ...............3/4 ................ 3/4SFB45-1616 ...............1 ...................... 1SFB45-2020 ...............1-1/4.......... 1-1/4SFB45-2424 ...............1-1/2.......... 1-1/2SFB45-3232 ...............2 ...................... 2
90° Tube Female BSPPSwivel
P/Number ...................Thread .......HoseSFB90-0404 ...............1/4 ................ 1/4SFB90-0604 ...............3/8 ................ 1/4SFB90-0606 ...............3/8 ................ 3/8SFB90-0806 ...............1/2 ................ 3/8SFB90-0808 ...............1/2 ................ 1/2SFB90-1010 ...............5/8 ................ 5/8SFB90-1212 ...............3/4 ................ 3/4SFB90-1616 ...............1 ...................... 1SFB90-2020 ...............1-1/4..........1-1/4SFB90-2424 ...............1-1/2..........1-1/2SFB90-3232 ...............2 ...................... 2
90° Close Female BSPPSwivel
P/Number ...................Thread .......HoseSFB90C-0404.............1/4 ................ 1/4SFB90C-0606.............3/8 ................ 3/8SFB90C-0808.............1/2 ................ 1/2SFB90C-1212.............3/4 ................ 3/4SFB90C-1616.............1 ...................... 1
Straight Female BSPPSwivel Flat Seat
P/Number ...................Thread .......HoseSFBZ-0606 .................3/8 ................ 3/8SFBZ-0806 .................1/2 ................ 3/8SFBZ-0808 .................1/2 ................ 1/2
* SFBZ-1212 .................3/4 ................ 3/4
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.9
Section 3Super-Crimp Couplings - Two Piece
Straight Male JIC
P/Number ...................Thread....... HoseSMJ-0704 ...................7/16 .............. 1/4SMJ-0804 ...................1/2 ................ 1/4SMJ-0904 ...................9/16 .............. 1/4SMJ-0906 ...................9/16 .............. 3/8SMJ-1206 ...................3/4 ................ 3/8SMJ-1208 ...................3/4 ................ 1/2SMJ-1408 ...................7/8 ................ 1/2SMJ-1410 ...................7/8 ................ 5/8SMJ-1708 ...................1-1/16........... 1/2SMJ-1710 ...................1-1/16........... 5/8SMJ-1712 ...................1-1/16........... 3/4SMJ-2112 ...................1-5/16........... 3/4SMJ-2116 ...................1-5/16.............. 1SMJ-2616 ...................1-5/8................ 1SMJ-2620 ...................1-5/8..........1-1/4SMJ-3024 ...................1-7/8..........1-1/2
* SMJ-4032 ...................2-1/2................ 2
Straight Female JICSwivel
P/Number ...................Thread....... HosePFJ-0703 ....................7/16 ............ 3/16SFJ-0704 ....................7/16 .............. 1/4SFJ-0804 ....................1/2 ................ 1/4SFJ-0904 ....................9/16 .............. 1/4PFJ-0905 ....................9/16 ............ 5/16SFJ-0906 ....................9/16 .............. 3/8SFJ-0908 ....................9/16 .............. 1/2
* SFJ-1204 ....................3/4 ................ 1/4SFJ-1206 ....................3/4 ................ 3/8SFJ-1208 ....................3/4 ................ 1/2SFJ-1210 ....................3/4 ................ 5/8SFJ-1406 ....................7/8 ................ 3/8SFJ-1408 ....................7/8 ................ 1/2SFJ-1410 ....................7/8 ................ 5/8SFJ-1412 ....................7/8 ................ 3/4SFJ-1708 ....................1-1/16........... 1/2SFJ-1710 ....................1-1/16........... 5/8SFJ-1712 ....................1-1/16........... 3/4SFJ-1716 ....................1-1/16.............. 1SFJ-1912 ....................1-3/16........... 3/4SFJ-2112 ....................1-5/16........... 3/4SFJ-2116 ....................1-5/16.............. 1SFJ-2120 ....................1-5/16........1-1/4SFJ-2616 ....................1-5/8................ 1SFJ-2620 ....................1-5/8..........1-1/4SFJ-3024 ....................1-7/8..........1-1/2SFJ-4032 ....................2-1/2................ 2
45° Tube Female JICSwivel
P/Number....................Thread .......HoseSFJ45-0704.................7/16 ..............1/4SFJ45-0804.................1/2 ................1/4SFJ45-0904.................9/16 ..............1/4SFJ45-0906.................9/16 ..............3/8SFJ45-1206.................3/4 ................3/8SFJ45-1208.................3/4 ................1/2SFJ45-1408.................7/8 ................1/2SFJ45-1410.................7/8 ................5/8SFJ45-1412.................7/8 ................3/4SFJ45-1710.................1-1/16 ...........5/8SFJ45-1712.................1-1/16 ...........3/4SFJ45-1912.................1-3/16 ...........3/4SFJ45-2112.................1-5/16 ...........3/4SFJ45-2116.................1-5/16 .............. 1SFJ45-2620.................1-5/8 ..........1-1/4SFJ45-3024.................1-7/8 ..........1-1/2SFJ45-4032.................2-1/2 ................ 2
45° Close Female JICSwivel
P/Number....................Thread .......HoseSFJ45C-0704 ..............7/16 ..............1/4SFJ45C-0904 ..............9/16 ..............1/4SFJ45C-1408 ..............7/8 ................1/2SFJ45C-1712 ..............1-1/16 ...........3/4
90° Tube Female JICSwivel
P/Number................... Thread .......HoseSFJ90-0704 ................ 7/16...............1/4SFJ90-0804 ................ 1/2.................1/4SFJ90-0904 ................ 9/16...............1/4SFJ90-0906 ................ 9/16...............3/8SFJ90-1206 ................ 3/4.................3/8SFJ90-1208 ................ 3/4.................1/2SFJ90-1406 ................ 7/8.................3/8SFJ90-1408 ................ 7/8.................1/2SFJ90-1410 ................ 7/8.................5/8SFJ90-1412 ................ 7/8.................3/4SFJ90-1708 ................ 1-1/16 ...........1/2SFJ90-1710 ................ 1-1/16 ...........5/8SFJ90-1712 ................ 1-1/16 ...........3/4SFJ90-1912 ................ 1-3/16 ...........3/4SFJ90-2112 ................ 1-5/16 ...........3/4SFJ90-2116 ................ 1-5/16 ..............1SFJ90-2620 ................ 1-5/8 ......... 1-1/4SFJ90-3024 ................ 1-7/8 ......... 1-1/2SFJ90-4032 ................ 2-1/2 ................2
90° Tube Female JICLong Swivel
P/Number................... Thread .......HoseSFJ90L-0704.............. 7/16...............1/4SFJ90L-0904.............. 9/16...............1/4SFJ90L-0906.............. 9/16...............3/8SFJ90L-1206.............. 3/4.................3/8SFJ90L-1208.............. 3/4.................1/2SFJ90L-1408.............. 7/8.................1/2SFJ90L-1712.............. 1-1/16 ...........3/4SFJ90L-2116.............. 1-5/16 ..............1
3.10 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 3Super-Crimp Couplings - Two Piece
90° Close Female JICSwivel
P/Number................... Thread .......HoseSFJ90C-0704 ............. 7/16...............1/4SFJ90C-0904 ............. 9/16...............1/4SFJ90C-0906 ............. 9/16...............3/8SFJ90C-1206 ............. 3/4.................3/8SFJ90C-1208 ............. 3/4.................1/2SFJ90C-1408 ............. 7/8.................1/2SFJ90C-1712 ............. 1-1/16 ...........3/4SFJ90C-2116 ............. 1-5/16 ..............1
Straight MaleFlat Faced O-Ring (ORFS)
P/Number................... Thread .......HoseSMORF-0904 ............ 9/16...............1/4SMORF-1106 ............ 11/16.............3/8SMORF-1306 ............ 13/16.............3/8SMORF-1308 ............ 13/16.............1/2SMORF-1608 ............ 1....................1/2SMORF-1610 ............ 1....................5/8SMORF-1910 ............ 1-3/16 ...........5/8SMORF-1912 ............ 1-3/16 ...........3/4SMORF-2312 ............ 1-7/16 ...........3/4SMORF-2316 ............ 1-7/16 ..............1
Straight Female Flat Faced O-Ring (ORFS)
Swivel
P/Number................... Thread .......HoseSFFO-0904 ................ 9/16...............1/4SFFO-1104 ................ 11/16.............1/4SFFO-1106 ................ 11/16.............3/8SFFO-1306 ................ 13/16.............3/8SFFO-1308 ................ 13/16.............1/2SFFO-1608 ................ 1....................1/2SFFO-1610 ................ 1....................5/8SFFO-1912 ................ 1-3/16 ...........3/4SFFO-2312 ................ 1-7/16 ...........3/4SFFO-2316 ................ 1-7/16 ..............1SFFO-2720 ................ 1-11/16 ..... 1-1/4SFFO-3224 ................ 2................ 1-1/2
45° Tube FemaleFlat Faced O-Ring (ORFS)
Swivel
P/Number ...................Thread....... HoseSFFO45-0904.............9/16 .............. 1/4SFFO45-1104.............11/16............ 1/4SFFO45-1106.............11/16............ 3/8SFFO45-1306.............13/16............ 3/8SFFO45-1308.............13/16............ 1/2SFFO45-1608.............1 ................... 1/2SFFO45-1610.............1 ................... 5/8SFFO45-1910.............1-3/16........... 5/8SFFO45-1912.............1-3/16........... 3/4SFFO45-2316.............1-7/16.............. 1SFFO45-2720.............1-11/16...... 1-1/4SFFO45-3224.............2 ................ 1-1/2
90° Tube FemaleFlat Faced O-Ring (ORFS)
Short Drop Swivel
P/Number ...................Thread....... HoseSFFO90S-0904...........9/16 .............. 1/4SFFO90S-1104...........11/16............ 1/4SFFO90S-1106...........11/16............ 3/8SFFO90S-1306...........13/16............ 3/8SFFO90S-1308...........13/16............ 1/2SFFO90S-1608...........1 ................... 1/2SFFO90S-1610...........1 ................... 5/8SFFO90S-1910...........1-3/16........... 5/8SFFO90S-1912...........1-3/16........... 3/4SFFO90S-2312...........1-7/16........... 3/4SFFO90S-2316...........1-7/16.............. 1SFFO90S-2720...........1-11/16...... 1-1/4SFFO90S-3224...........2 ................ 1-1/2
90° Tube FemaleFlat Faced O-Ring (ORFS)
Long Drop Swivel
P/Number ...................Thread....... HoseSFFO90L-0904 .......... 9/16 .............. 1/4SFFO90L-1106 .......... 11/16............ 3/8SFFO90L-1308 .......... 13/16............ 1/2SFFO90L-1912 .......... 19/16............ 3/4SFFO90L-2316 .......... 1-7/16.............. 1
Straight Female BSPPJapanese JIS B8363
30° Cone Swivel
P/Number ...................Thread .......HoseSFNP-0404 .................1/4 ................ 1/4SFNP-0606 .................3/8 ................ 3/8SFNP-0806 .................1/2 ................ 3/8SFNP-0808 .................1/2 ................ 1/2SFNP-1212 .................3/4 ................ 3/4SFNP-1616 .................1 ...................... 1SFNP-2020 .................1-1/4..........1-1/4
Straight Female MetricJapanese JIS B8363
30° Cone SwivelKomatsu
P/Number ............ Thread .............HoseSFK-1404 ............ M14 x 1.5 ........... 1/4SFK-1806 ............ M18 x 1.5 ........... 3/8SFK-2006 ............ M20 x 1.5 ........... 3/8SFK-2208 ............ M22 x 1.5 ........... 1/2SFK-2410 ............ M24 x 1.5 ........... 5/8SFK-3012 ............ M30 x 1.5 ........... 3/4SFK-3316 ............ M33 x 1.5 .............. 1
45° Female MetricJapanese JIS B8363
30° Cone SwivelKomatsu
P/Number ............ Thread .............HoseSFK45-1404 ........ M14 x 1.5 ........... 1/4SFK45-1806 ........ M18 x 1.5 ........... 3/8SFK45-2208 ........ M22 x 1.5 ........... 1/2SFK45-2410 ........ M24 x 1.5 ........... 5/8SFK45-3012 ........ M30 x 1.5 ........... 3/4SFK45-3316 ........ M33 x 1.5 .............. 1
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.11
Section 3Super-Crimp Couplings - Two Piece
90° Female MetricJapanese JIS B8363
30° Cone SwivelKomatsu
P/Number .............Thread............. HoseSFK90-1404 .........M14 x 1.5........... 1/4SFK90-1806 .........M18 x 1.5........... 3/8SFK90-2208 .........M22 x 1.5........... 1/2SFK90-2410 .........M24 x 1.5........... 5/8SFK90-3012 .........M30 x 2.0........... 3/4SFK90-3316 .........M33 x 2.0.............. 1
Straight Male NPTF
P/Number ...................Thread....... HoseSMN-0204..................1/8 ................ 1/4SMN-0404..................1/4 ................ 1/4SMN-0406..................1/4 ................ 3/8SMN-0604..................3/8 ................ 1/4SMN-0606..................3/8 ................ 3/8SMN-0608..................3/8 ................ 1/2SMN-0806..................1/2 ................ 3/8SMN-0808..................1/2 ................ 1/2SMN-1208..................3/4 ................ 1/2SMN-1212..................3/4 ................ 3/4SMN-1616..................1 ...................... 1SMN-2020..................1-1/4..........1-1/4SMN-2424 .................1-1/2..........1-1/2SMN-3232..................2 ...................... 2
Straight Male NPTFLong SeriesPorta-Power
(superseded byEMNL-0604 p3.17)
P/Number ...................Thread....... HoseSMNL-06049.15 ........3/8 ................ 1/4
Fixed Female NPTF
P/Number....................Thread .......HoseSFNF-0404 .................1/4 ................1/4
* SFNF-0606 .................3/8 ................3/8
Hose Joiner
P/Number.................... ..................HoseSHJ-0404 .................... .....................1/4SHJ-0606 .................... .....................3/8SHJ-0808 .................... .....................1/2SHJ-1212 .................... .....................3/4
Lifesaver Hose Ends
P/Number....................Thread .......HoseSLS-0404....................1/4 ................1/4SLS-0604....................3/8 ................1/4SLS-0606....................3/8 ................3/8SLS-10M06Z..............5/8 ................3/8SLS-0806....................1/2 ................3/8SLS-0808....................1/2 ................1/2SLS-1008....................5/8 ................1/2SLS-1010....................5/8 ................5/8SLS-1012....................5/8 ................3/4SLS-1212....................3/4 ................3/4SLS-1612....................1 ...................3/4SLS-1616....................1 ...................... 1SLS-2020....................1-1/4 ..........1-1/4SLS-2424....................1-1/2 ..........1-1/2
Straight MaleS.A.E. O-Ring Boss
(Swivel)
P/Number................... Thread .......HoseSMOX-0704 .............. 7/16...............1/4SMOX-0806 .............. 1/2.................3/8SMOX-0906 .............. 9/16...............3/8SMOX-1204 .............. 3/4.................1/4SMOX-1206 .............. 3/4.................3/8SMOX-1208 .............. 3/4.................1/2SMOX-1408 .............. 7/8.................1/290 Duro O Ring supplied
90° Close Male SwivelS.A.E. O-Ring Boss
P/Number................... Thread .......HoseSMOX90C-1206........ 3/4.................3/8SMOX90C-1208........ 3/4.................1/2SMOX90C-1408........ 7/8.................1/290 Duro O Ring supplied
Straight Female S.A.ESwivel
P/Number................... Thread .......HoseSFS-0804 ................... 1/2.................1/4SFS-1006 ................... 5/8.................3/8SFS-1206 ................... 3/4.................3/8
90° Female S.A.ESwivel
P/Number................... Thread .......HoseSFS90-1006 ............... 5/8.................3/8SFS90-1206 ............... 3/4.................3/8
3.12 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 3Super-Crimp Couplings - Two Piece
Straight Male SAEInverted Flare
P/Number................... Thread .......HoseSMIX-0704 ................ 7/16...............1/4SMIX-0804 ................ 1/2.................1/4SMIX-1006 ................ 5/8.................3/8
45° Tube Male SAEInverted Flare
P/Number................... Thread .......Hose* SMIX45-0704 ............ 7/16...............1/4* SMIX45-0804 ............ 1/2.................1/4
SMIX45-1006 ............ 5/8.................3/8
90° Tube Male SAEInverted Flare
P/Number................... Thread .......HoseSMIX90-0704 ............ 7/16...............1/4SMIX90-0804 ............ 1/2.................1/4SMIX90-1006 ............ 5/8.................3/8
Straight FemaleSwivel DIN
Heavy O-Ring
P/Number .............Thread ............. HoseSFDKO-1404 .......M14 x 1.5........... 1/4SFDKO-1604 .......M16 x 1.5........... 1/4SFDKO-1804 .......M18 x 1.5........... 1/4SFDKO-1806 .......M18 x 1.5........... 3/8SFDKO-2006 .......M20 x 1.5........... 3/8SFDKO-2206 .......M22 x 1.5........... 3/8SFDKO-2208 .......M22 x 1.5........... 1/2SFDKO-2408 .......M24 x 1.5........... 1/2SFDKO-3010 .......M30 x 2.0........... 5/8SFDKO-3012 .......M30 x 2.0........... 3/4SFDKO-3612 .......M36 x 2.0........... 3/4SFDKO-3616 .......M36 x 2.0.............. 1SFDKO-4216 .......M42 x 2.0.............. 1SFDKO-5220 .......M52 x 2.0........ 1-1/4SFDKO-5224 .......M52 x 2.0........ 1-1/2
45° FemaleSwivel DIN
Heavy O-Ring
P/Number .............Thread ............. HoseSFDKO45-1404 ...M14 x 1.5........... 1/4SFDKO45-1604 ...M16 x 1.5........... 1/4SFDKO45-1804 ...M18 x 1.5........... 1/4SFDKO45-1806 ...M18 x 1.5........... 3/8SFDKO45-2006 ...M20 x 1.5........... 3/8SFDKO45-2008 ...M20 x 1.5........... 1/2SFDKO45-2408 ...M24 x 1.5........... 1/2SFDKO45-3010 ...M30 x 2.0........... 5/8SFDKO45-3012 ...M30 x 2.0........... 3/4SFDKO45-3612 ...M36 x 2.0........... 3/4SFDKO45-5220 ...M52 x 2.0........ 1-1/4
90° FemaleSwivel DIN
Heavy O-Ring
P/Number ............ Thread .............HoseSFDKO90-1404 .. M14 x 1.5 ........... 1/4SFDKO90-1604 .. M16 x 1.5 ........... 1/4SFDKO90-1804 .. M18 x 1.5 ........... 1/4SFDKO90-1806 .. M18 x 1.5 ........... 3/8SFDKO90-2006 .. M20 x 1.5 ........... 3/8SFDKO90-2206 .. M22 x 1.5 ........... 3/8SFDKO90-2208 .. M22 x 1.5 ........... 1/2SFDKO90-2408 .. M24 x 1.5 ........... 1/2SFDKO90-3010 .. M30 x 2.0 ........... 5/8SFDKO90-3012 .. M30 x 2.0 ........... 3/4SFDKO90-3612 .. M36 x 2.0 ........... 3/4SFDKO90-5220 .. M52 x 2.0 ........1-1/4
Straight Male DINHeavy Series
P/Number ............ Thread .............HoseSMDKS-1404...... M14 x 1.5 ........... 1/4SMDKS-1604...... M16 x 1.5 ........... 1/4SMDKS-1804...... M18 x 1.5 ........... 1/4SMDKS-2006...... M20 x 1.5 ........... 3/8SMDKS-2206...... M22 x 1.5 ........... 3/8SMDKS-2408...... M24 x 1.5 ........... 1/2SMDKS-3010...... M30 x 2.0 ........... 5/8SMDKS-3012...... M30 x 2.0 ........... 3/4SMDKS-3612...... M36 x 2.0 ........... 3/4SMDKS-3616...... M36 x 2.0 .............. 1SMDKS-4216...... M42 x 2.0 .............. 1SMDKS-5220...... M52 x 2.0 ........1-1/4
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.13
Section 3Super-Crimp Couplings - Two Piece
Straight FemaleSwivel DINLight Series
Universal Cone Seat24°/60° Cone
P/Number .............Thread ............. HoseSFDKL-1204........M12 x 1.5........... 1/4SFDKL-1404........M14 x 1.5........... 1/4SFDKL-1604........M16 x 1.5........... 1/4SFDKL-1606........M16 x 1.5........... 3/8SFDKL-1608........M16 x 1.5........... 1/2SFDKL-1806........M18 x 1.5........... 3/8SFDKL-1808........M18 x 1.5........... 1/2SFDKL-2206........M22 x 1.5........... 3/8SFDKL-2208........M22 x 1.5........... 1/2SFDKL-2210........M22 x 1.5........... 5/8SFDKL-2608........M26 x 1.5........... 1/2SFDKL-2610........M26 x 1.5........... 5/8SFDKL-2612........M26 x 1.5........... 3/4SFDKL-3012........M30 x 2.0........... 3/4SFDKL-3616........M36 x 2.0.............. 1SFDKL-4520........M45 x 2.0........1-1/4SFDKL-5224........M52 x 2.0........1-1/2
45° FemaleSwivel DINLight Series
Universal Cone Seat24°/60° Cone
P/Number .............Thread ............. HoseSFDKL45-1204....M12 x 1.5........... 1/4SFDKL45-1404....M14 x 1.5........... 1/4SFDKL45-1604....M16 x 1.5........... 1/4SFDKL45-1606....M16 x 1.5........... 3/8SFDKL45-1806....M18 x 1.5........... 3/8SFDKL45-1808....M18 x 1.5........... 1/2SFDKL45-2208....M22 x 1.5........... 1/2SFDKL45-2608....M26 x 1.5........... 1/2SFDKL45-2610....M26 x 1.5........... 5/8SFDKL45-3012....M30 x 2.0........... 3/4
90° FemaleSwivel DINLight Series
Universal Cone Seat24°/60° Cone
P/Number............. Thread .............HoseSFDKL90-1204 ... M12 x 1.5 ...........1/4SFDKL90-1404 ... M14 x 1.5 ...........1/4SFDKL90-1604 ... M16 x 1.5 ...........1/4SFDKL90-1606 ... M16 x 1.5 ...........3/8SFDKL90-1806 ... M18 x 1.5 ...........3/8SFDKL90-2208 ... M22 x 1.5 ...........1/2SFDKL90-2608 ... M26 x 1.5 ...........1/2SFDKL90-2610 ... M26 x 1.5 ...........5/8SFDKL90-3012 ... M30 x 2.0 ...........3/4SFDKL90-3616 ... M36 x 2.0 .............. 1SFDKL90-4520 ... M45 x 2.0 ........1-1/4
Straight Male DINLight Series
P/Number............. Thread .............HoseSMDKL-1204...... M12 x 1.5 ...........1/4SMDKL-1404...... M14 x 1.5 ...........1/4SMDKL-1406...... M14 x 1.5 ...........3/8SMDKL-1604...... M16 x 1.5 ...........1/4SMDKL-1606...... M16 x 1.5 ...........3/8SMDKL-1804...... M18 x 1.5 ...........1/4SMDKL-1806...... M18 x 1.5 ...........3/8SMDKL-1808...... M18 x 1.5 ...........1/2SMDKL-2206...... M22 x 1.5 ...........3/8SMDKL-2208...... M22 x 1.5 ...........1/2SMDKL-2608...... M26 x 1.5 ...........1/2SMDKL-2610...... M26 x 1.5 ...........5/8SMDKL-3012...... M30 x 2.0 ...........3/4SMDKL-3616...... M36 x 2.0 .............. 1
FRENCH GAZStraight Male
P/Number................... Thread .......HoseSMGAZ-3012 ............ M30 ..............3/4SMGAZ-3612 ............ M36 ..............3/4SMGAZ-3616 ............ M36 .................1SMGAZ-4516 ............ M45 .................1
FRENCH GAZStraight Female
P/Number................... Thread .......HoseSFGAZ-3010 ............. M30 ..............5/8SFGAZ-3012 ............. M30 ..............3/4
3.14 *Manufactured To Order - Minimum Order Quantities May Apply
Section 3Super- & Hammer-Crimp Couplings
Straight MaleStaplelock System
P/Number................... StapleHose1/41/4SSS-1004 ................... 3/8.................1/4SSS-1006 ................... 3/8.................3/8SSS-1308 ................... 1/2.................1/290 Duro O Ring & Anti-extrusion Washer supplied
Hammer-Crimp FerruleNon-Skive
Suits EFG4K
P/Number ................... ..................HoseFNH-16....................... ........................ 1FNH-20....................... ..................1-1/4
Straight Female BSPPHammer Coupling
P/Number ...................Thread .......HoseHFB-1616...................1 ...................... 1HFB-2020...................1-1/4..........1-1/4
The HAMMER COUPLING is especiallydesigned to withstand very heavy and continuous pressure spikes such as isexperienced in hammer systems
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.15
Section 3Super-Crimp Couplings - Two Piece
Straight SAE O-RingFlange Code 61
P/Number ...................Flange ....... HoseSFL-0808 ...................1/2 ................ 1/2SFL-1208 ...................3/4 ................ 1/2SFL-1212 ...................3/4 ................ 3/4SFL-1612 ...................1 ................... 3/4SFL-1616 ...................1 ...................... 1SFL-2012 ...................1-1/4............. 3/4SFL-2016 ...................1-1/4................ 1SFL-2020 ...................1-1/4..........1-1/4SFL-2416 ...................1-1/2................ 1SFL-2420 ...................1-1/2..........1-1/4SFL-2424 ...................1-1/2..........1-1/2SFL-3224 ...................2 ................1-1/2SFL-3232 ...................2 ...................... 2SFL-4032 ...................2-1/2................ 290 Duro O Ring supplied
Straight Komatsu O-Ring Flange
P/Number ...................Flange ....... HoseSFLK-1008.................5/8 ...... 1/25/85/8SFLK-1012.................5/8 ................ 3/490 Duro O Ring supplied
22-1/2° SAE O-Ring FlangeCode 61
P/Number ...................Flange ....... HoseSFL22-0808 ...............1/2 ................ 1/2SFL22-1208 ...............3/4 ................ 1/2SFL22-1212 ...............3/4 ................ 3/4SFL22-1612 ...............1 ................... 3/4SFL22-1616 ...............1 ...................... 1SFL22-2016 ...............1-1/4................ 1SFL22-2020 ...............1-1/4..........1-1/4SFL22-2420 ...............1-1/2..........1-1/4SFL22-2424 ...............1-1/2..........1-1/2SFL22-3224 ...............2 ................1-1/2SFL22-3232 ...............2 ...................... 290 Duro O Ring supplied
30° SAE FlangeCode 61
P/Number....................Flange........Hose* SFL30-0808................1/2 ................1/2
SFL30-1208................3/4 ................1/2SFL30-1212................3/4 ................3/4SFL30-1612................1 ...................3/4SFL30-1616................1 ...................... 1SFL30-2016................1-1/4 ................ 1SFL30-2020................1-1/4 ..........1-1/4SFL30-2420................1-1/2 ..........1-1/4SFL30-2424................1-1/2 ..........1-1/2SFL30-3224................2 ................1-1/2SFL30-3232................2 ...................... 290 Duro O Ring supplied
45° SAE FlangeCode 61
P/Number....................Flange........HoseSFL45-0808................1/2 ................1/2SFL45-1208................3/4 ................1/2SFL45-1212................3/4 ................3/4SFL45-1612................1 ...................3/4SFL45-1616................1 ...................... 1SFL45-2016................1-1/4 ................ 1SFL45-2020................1-1/41-1/41-1/21SFL45-2420................1-1/2 ..........1-1/4SFL45-2424................1-1/2 ..........1-1/2SFL45-2432................1-1/2 ................ 2SFL45-3224................2 ................1-1/2SFL45-3232................2 ...................... 2SFL45-4032................2-1/2 ................ 290 Duro O Ring supplied
45° KomatsuO-Ring Flange
P/Number....................Flange........HoseSFLK45-1008.............5/8 ................1/2SFLK45-1012.............5/8 ................3/4
60° SAE O-Ring FlangeCode 61
P/Number................... Flange........HoseSFL60-0808 ............... 1/2.................1/2SFL60-1208 ............... 3/4.................1/2SFL60-1212 ............... 3/4.................3/4SFL60-1612 ............... 1....................3/4SFL60-1616 ............... 1.......................1SFL60-2016 ............... 1-1/4 ................1SFL60-2020 ............... 1-1/4 ......... 1-1/4SFL60-2420 ............... 1-1/2 ......... 1-1/4SFL60-2424 ............... 1-1/2 ......... 1-1/2SFL60-3224 ............... 2................ 1-1/2SFL60-3232 ............... 2.......................290 Duro O Ring supplied
67° SAE O-Ring FlangeCode 61
P/Number................... Flange........HoseSFL67-0808 ............... 1/2.................1/2SFL67-1208 ............... 3/4.................1/2SFL67-1212 ............... 3/4.................3/4SFL67-1612 ............... 1....................3/4
* SFL67-1616 ............... 1.......................1SFL67-2016 ............... 1-1/4 ................1SFL67-2020 ............... 1-1/4 ......... 1-1/4SFL67-2420 ............... 1-1/2 ......... 1-1/4SFL67-2424 ............... 1-1/2 ......... 1-1/2SFL67-3224 ............... 2................ 1-1/2SFL67-3232 ............... 2.......................290 Duro O Ring supplied
3.16 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 3Super-Crimp Couplings - Two Piece
90° SAE FlangeCode 61
P/Number................... Flange........HoseSFL90-0808 ............... 1/2.................1/2SFL90-1208 ............... 3/4.................1/2SFL90-1212 ............... 3/4.................3/4SFL90-1612 ............... 1....................3/4SFL90-1616 ............... 1.......................1SFL90-1620 ............... 1................ 1-1/4SFL90-2012 ............... 1-1/4 .............3/4SFL90-2016 ............... 1-1/4 ................1SFL90-2020 ............... 1-1/4 ......... 1-1/4SFL90-2024 ............... 1-1/4 ......... 1-1/2SFL90-2416 ............... 1-1/2 ................1SFL90-2420 ............... 1-1/2 ......... 1-1/4SFL90-2424 ............... 1-1/2 ......... 1-1/2SFL90-3224 ............... 2................ 1-1/2SFL90-3232 ............... 2.......................2SFL90-4032 ............... 2-1/2 ................290 Duro O Ring supplied
90° KomatsuO-Ring Flange
P/Number................... Flange........HoseSFLK90-1008 ............ 5/8.................1/2SFLK90-1012 ............ 5/8.................3/4
90° SAE FlangeLong Drop Code 61
P/Number................... Flange........HoseSFL90L-1212/96........ 3/4.................3/4SFL90L-1616/118...... 1.......................1SFL90L-2016/118...... 1-1/4 ................1SFL90L-2020/91........ 1-1/4 ......... 1-1/4SFL90L-2020/130...... 1-1/4 ......... 1-1/4SFL90L-2420/130...... 1-1/2 ......... 1-1/4SFL90L-2424/148...... 1-1/2 ......... 1-1/2SFL90L-3232/203...... 2.......................290 Duro O Ring supplied
110° SAE FlangeCode 61
P/Number ...................Flange ....... HoseSFL110-1212 .............3/4 ................ 3/4SFL110-1616 .............1 ...................... 1SFL110-2016 .............1-1/4................ 1SFL110-2020 .............1-1/4.......... 1-1/4SFL110-2420 .............1-1/2.......... 1-1/4SFL110-2424 .............1-1/2.......... 1-1/2SFL110-3232 .............2 ...................... 2
90 Duro O Ring supplied
135° SAE FlangeCode 61
P/Number ...................Flange ....... HoseSFL135-1212 .............3/4 ................ 3/4SFL135-2424 .............2 ...................... 2SFL135-3232 .............2 ...................... 290 Duro O Ring supplied
Straight SAE FlangeCode 62
P/Number ...................Flange ....... HoseSFLH-0808.................1/2 ................ 1/2SFLH-1212.................3/4 ................ 3/4SFLH-1612.................1 ................... 3/4SFLH-1616.................1 ...................... 1SFLH-2016.................1-1/4................ 1SFLH-2020.................1-1/4.......... 1-1/4SFLH-2424.................1-1/2.......... 1-1/2SFLH-3224.................2 ................ 1-1/2SFLH-3232.................2 ...................... 290 Duro O Ring supplied
45° SAE FlangeCode 62
P/Number ...................Flange .......HoseSFLH45-0808.............1/2 ................ 1/2SFLH45-1212.............3/4 ................ 3/4SFLH45-1612.............1 ................... 3/4SFLH45-1616.............1 ...................... 1SFLH45-2016.............1-1/4................ 1SFLH45-2020.............1-1/4..........1-1/4SFLH45-2024.............1-1/4..........1-1/2SFLH45-2420.............1-1/2..........1-1/4SFLH45-2424.............1-1/2..........1-1/2SFLH45-3224.............2 ................1-1/2SFLH45-3232.............2 ...................... 290 Duro O Ring supplied
90° SAE FlangeCode 62
P/Number ...................Flange .......HoseSFLH90-0808.............1/2 ................ 1/2SFLH90-1212.............3/4 ................ 3/4SFLH90-1216............. ..........................SFLH90-1612.............1 ................... 3/4SFLH90-1616.............1 ...................... 1SFLH90-1620.............1 ................1-1/4SFLH90-2016.............1-1/4................ 1SFLH90-2020.............1-1/4..........1-1/4SFLH90-2024.............1-1/4..........1-1/2SFLH90-2420.............1-1/2..........1-1/4SFLH90-2424.............1-1/2..........1-1/2SFLH90-3224.............2 ................1-1/2SFLH90-3232.............2 ...................... 290 Duro O Ring supplied
*Manufactured To Order - Minimum Order Quantities May Apply 3.17
Section 3Ezi-Crimp Couplings - One Piece
Straight Male BSPT
P/Number ...................Thread....... HoseEMB-0204..................1/8 ................ 1/4EMB-0404..................1/4 ................ 1/4EMB-0406..................1/4 ................ 3/8EMB-0604..................3/8 ................ 1/4EMB-0606..................3/8 ................ 3/8EMB-0806..................1/2 ................ 3/8EMB-0808..................1/2 ................ 1/2EMB-1210..................3/4 ................ 5/8
Straight Male BSPPEncapsulated Seal
Included in the price
P/Number ...................Thread....... HoseEMR-0604..................3/8 ................ 1/4EMR-0606..................3/8 ................ 3/8EMR-0806..................1/2 ................ 3/8EMR-0808..................1/2 ................ 1/2
Straight Female BSPPSwivel
P/Number ...................Thread....... HoseEFB-0204H ................1/8 ................ 1/4EFB-0404H ................1/4 ................ 1/4EFB-0604H ................3/8 ................ 1/4EFB-0606H ................3/8 ................ 3/8EFB-0806H ................1/2 ................ 3/8EFB-0808H ................1/2 ................ 1/2EFB-1008H ................5/8 ................ 1/2EFB-1210 ...................3/4 ................ 5/8EFB-1212H ................3/4 ................ 3/4
90° Tube Female BSPPSwivel
P/Number....................Thread .......HoseEFB90-0404 ...............1/4 ................1/4EFB90-0606 ...............3/8 ................3/8EFB90-0808 ...............1/2 ................1/2EFB90-1210 ...............3/4 ................5/8EFB90-1212 ...............3/4 ................3/4
90° Close Female BSPPSwivel
P/Number....................Thread .......HoseEFB90C-0404.............1/4 ................1/4EFB90C-0604.............3/8 ................1/4EFB90C-0606.............3/8 ................3/8EFB90C-0808.............1/2 ................1/2EFB90C-1212.............3/4 ................3/4
Straight Male NPTSuit Porta-Power Hoses
P/Number....................Thread .......HoseEMNL-0604 ...............3/8 ................1/4
Straight Male JIC
P/Number....................Thread .......HoseEMJ-0704 ...................7/16 ..............1/4EMJ-0904 ...................9/16 ..............1/4EMJ-0906 ...................9/16 ..............3/8EMJ-1204 ...................3/4 ................1/4EMJ-1206 ...................3/4 ................3/8EMJ-1208 ...................3/4 ................1/2EMJ-1408 ...................7/8 ................1/2EMJ-1410 ...................7/8 ................5/8EMJ-1708 ...................1-1/16 ...........1/2EMJ-1710 ...................1-1/16 ...........5/8
Straight Female JICSwivel
P/Number................... Thread .......HoseEFJ-0704H................. 7/16...............1/4EFJ-0804H................. 1/2.................1/4EFJ-0904H................. 9/16...............1/4EFJ-0906H................. 9/16...............3/8EFJ-0908H................. 9/16...............1/2EFJ-1206H................. 3/4.................3/8EFJ-1208H................. 3/4.................1/2EFJ-1406H................. 7/8.................3/8EFJ-1408H................. 7/8.................1/2EFJ-1410H................. 7/8.................5/8EFJ-1412H................. 7/8.................3/4EFJ-1708H................. 1-1/16 ...........1/2EFJ-1710H................. 1-1/16 ...........5/8EFJ-1712H................. 1-1/16 ...........3/4EFJ-2112H................. 1-5/16 ...........3/4
45° Tube Female JICSwivel
P/Number................... Thread .......HoseEFJ45-0704................ 7/16...............1/4EFJ45-0904................ 9/16...............1/4EFJ45-0906................ 9/16...............3/8EFJ45-1206................ 3/4.................3/8EFJ45-1208................ 3/4.................1/2EFJ45-1408................ 7/8.................1/2EFJ45-1410................ 7/8.................5/8EFJ45-1710................ 1-1/16 ...........5/8EFJ45-1712................ 1-1/16 ...........3/4
90° Tube Female JICSwivel
P/Number................... Thread .......HoseEFJ90-0704................ 7/16...............1/4EFJ90-0804................ 1/2.................1/4EFJ90-0904................ 9/16...............1/4EFJ90-0906................ 9/16...............3/8EFJ90-0908................ 9/16...............1/2EFJ90-1206................ 3/4.................3/8EFJ90-1208................ 3/4.................1/2EFJ90-1406................ 7/8.................3/8EFJ90-1408................ 7/8.................1/2EFJ90-1410................ 7/8.................5/8EFJ90-1710................ 1-1/16 ...........5/8EFJ90-1712................ 1-1/16 ...........3/4EFJ90-2112................ 1-5/16 ...........3/4
3.18 *Manufactured To Order - Minimum Order Quantities May Apply
Section 3Ezi-Crimp Couplings - One Piece
90° Tube Female JICLong Drop Swivel
P/Number................... Thread .......HoseEFJ90L-0704 ............. 7/16...............1/4EFJ90L-0904 ............. 9/16...............1/4EFJ90L-1206 ............. 3/4.................3/8EFJ90L-1208 ............. 3/4.................1/2EFJ90L-1408 ............. 7/8.................1/2EFJ90L-1408Z........... 7/8.................1/2EFJ90L-1410 ............. .................7/85/8
90° Close Female JICSwivel
P/Number................... Thread .......HoseEFJ90C-0704 ............. 7/16...............1/4EFJ90C-0904 ............. 9/16...............1/4EFJ90C-0906 ............. 9/16...............3/8EFJ90C-1206 ............. 3/4.................3/8EFJ90C-1208 ............. 3/4.................1/2EFJ90C-1408 ............. 7/8.................1/2EFJ90C-1712 ............. 1-1/16 ...........3/4
Straight Female Flat Faced O-Ring (ORFS)
Swivel
P/Number................... Thread .......HoseEFFO-0904 ................ 9/16...............1/4EFFO-1104 ................ 11/16.............1/4EFFO-1106 ................ 11/16.............3/8EFFO-1308 ................ 13/16.............1/2
45° Tube Female Flat Faced O-Ring (ORFS)
Swivel
P/Number ...................Thread....... HoseEFFO45-0904.............9/16 .............. 1/4
90° Tube FemaleFlat Faced O-Ring (ORFS)
Swivel
P/Number ...................Thread....... HoseEFFO90S-0904 .......... 9/16 .............. 1/4EFFO90S-1104 .......... 11/16............ 1/4EFFO90S-1106 .......... 11/16............ 3/8EFFO90S-1308 .......... 13/16............ 1/2
Section 3 Global-Crimp GS & GSP Couplings - Two Piece
*Supply To Order - Minimum Order Quantities May Apply 3.19
Global Spiral Ferrules(Non-Skive)
C12M, C12M-MTF, EFG4K,G5K, G6K
P/Number ................... .................. Hose6GS1F-4 ..................... ..................... 3/88GS1F-4 ..................... ..................... 1/210GS1F-4 ................... ..................... 5/812GS1F-4 ................... ..................... 3/416GS1F-4 ................... ........................ 120GS1F-4 ................... ..................1-1/420GS1F-6 ................... ..................1-1/424GS1F ...................... ..................1-1/224GSP1F-2................. ..................1-1/224GSP1F-4................. ..................1-1/232GSP1F-2................. ........................ 232GSP1F-4................. ........................ 2
Male O-Ring Boss
P/Number ...................Thread....... Hose6GS-6MB ...................9/16 .............. 3/88GS-8MB ...................3/4 ................ 1/28GS-10MB .................7/8 ................ 1/210GS-10MB ...............7/8 ................ 5/810GS-12MB ...............1-1/16........... 5/812GS-12MB ...............1-1/16........... 3/412GS-16MB ...............1-5/16........... 3/416GS-16MB ...............1-5/16.............. 1
Male PipeNPTF 30° Cone Seat
P/Number ...................Thread....... Hose6GS-6MP ...................3/8 ................ 3/86GS-8MP ...................1/2 ................ 3/88GS-8MP ...................1/2 ................ 1/28GS-12MP .................3/4 ................ 1/210GS-8MP .................1/2 ................ 5/810GS-12MP ...............3/4 ................ 5/812GS-12MP ...............3/4 ................ 3/412GS-16MP ...............1 ................... 3/416GS-12MP ...............3/4 ................... 116GS-16MP ...............1 ...................... 116GS-20MP ...............1-1/4................ 120GS-20MP ...............1-1/4..........1-1/424GSP-24MP .............1-1/2..........1-1/232GSP-32MP .............2 ...................... 2
Male British Standard PipeParallel
P/Number....................Thread .......Hose6GS-6MBSPP.............3/8 ................3/86GS-8MBSPP.............1/2 ................3/88GS-8MBSPP.............1/2 ................1/210GS-10MBSPP.........5/8 ................5/810GS-12MBSPP.........3/4 ................5/812GS-12MBSPP.........3/4 ................3/416GS-16MBSPP.........1 ...................... 120GS-20MBSPP.........1-1/4 ..........1-1/4
Female British Standard PipeParallel O-Ring Swivel
P/Number....................Thread .......Hose6GS-6FBSPORX........3/8 ................3/86GS-8FBSPORX........1/2 ................3/88GS-8FBSPORX........1/2 ................1/28GS-10FBSPORX......5/8 ................1/210GS-10FBSPORX....5/8 ................5/810GS-12FBSPORX....3/4 ................5/812GS-12FBSPORX....3/4 ................3/416GS-16FBSPORX....1 ...................... 120GS-20FBSPORX....1-1/4 ..........1-1/424GSP-24FBSPORX..1-1/2 ..........1-1/232GSP-32FBSPORX..2 ...................... 2
Female British Standard PipeParallel O-Ring Swivel
45° Bent Tube
P/Number.......................Thread....Hose6GS-6FBSPORX45.......3/8 .............3/88GS-8FBSPORX45.......1/2 .............1/210GS-10FBSPORX45...5/8 .............5/810GS-12FBSPORX45...3/4 .............5/812GS-12FBSPORX45...3/4 .............3/416GS-16FBSPORX45...1 ................... 120GS-20FBSPORX45...1-1/4.......1-1/424GSP-24FBSPORX45.1-1/2.......1-1/232GSP-32FBSPORX45 2................... 2
Female British Standard PipeParallel O-Ring Swivel
90° Bent Tube
P/Number..................... Thread .....Hose6GS-6FBSPORX90 ..... 3/8...............3/88GS-8FBSPORX90 ..... 1/2...............1/210GS-10FBSPORX90 . 5/8...............5/810GS-12FBSPORX90 . 3/4...............5/812GS-12FBSPORX90 . 3/4...............3/416GS-16FBSPORX90 . 1.....................120GS-20FBSPORX90 . 1-1/4 ....... 1-1/424GSP-24FBSPORX901-1/2 ....... 1-1/232GSP-32FBSPORX90 2..................2
Male JIC 37° Flare
P/Number................... Thread .......Hose6GS-6MJ.................... 9/16...............3/86GS-8MJ.................... 3/4.................3/86GS-10MJ.................. 7/8.................3/88GS-8MJ.................... 3/4.................1/28GS-10MJ.................. 7/8.................1/210GS-10MJ................ 7/8.................5/810GS-12MJ................ 1-1/16 ...........5/812GS-12MJ................ 1-1/16 ...........3/412GS-14MJ................ 1-3/16 ...........3/412GS-16MJ................ 1-5/16 ...........3/416GS-16MJ................ 1-5/16 ..............116GS-20MJ................ 1-5/8 ................120GS-20MJ................ 1-5/8 ......... 1-1/424GSP-20MJ.............. 1-5/8 ......... 1-1/224GSP-24MJ.............. 1-7/8 ......... 1-7/832GSP-32MJ.............. 2-1/2 ................2
Section 3Global-Crimp GS & GSP Couplings - Two Piece
3.20 *Supply To Order - Minimum Order Quantities May Apply
Female JIC 37° Flare Swivel
P/Number................... Thread .......Hose6GS-6FJX .................. 9/16...............3/86GS-8FJX .................. 3/4.................3/88GS-8FJX .................. 3/4.................1/28GS-10FJX ................ 7/8.................1/28GS-12FJX ................ 1-1/16 ...........1/210GS-10FJX .............. 7/8.................5/810GS-12FJX .............. 1-1/16 ...........5/812GS-10FJX .............. 7/8.................3/412GS-12FJX .............. 1-1/16 ...........3/412GS-14FJX .............. 1-3/16 ...........3/412GS-16FJX .............. 1-5/16 ...........3/416GS-12FJX .............. 1-1/16 ..............116GS-14FJX .............. 1-3/16 ..............116GS-16FJX .............. 1-5/16 ..............116GS-20FJX .............. 1-5/8 ................120GS-16FJX .............. 1-5/16 ....... 1-1/420GS-20FJX .............. 1-5/8 ......... 1-1/420GS-24FJX .............. 1-7/8 ......... 1-1/424GSP-24FJX............ 1-7/8 ......... 1-1/224GSP-32FJX............ 2-1/2 ......... 1-1/232GSP-32FJX............ 2-1/2 ................2
Female JIC 37° Flare Swivel45° Bent Tube
P/Number................... Thread .......Hose6GS-6FJX45S............ 9/16...............3/86GS-8FJX45S............ 3/4.................3/88GS-8FJX45S............ 3/4.................1/28GS-10FJX45S.......... 7/8.................1/210GS-10FJX45S........ 7/8.................5/810GS-12FJX45S........ 1-1/16 ...........5/812GS-12FJX45S........ 1-1/16 ...........3/412GS-16FJX45S........ 1-5/16 ...........3/416GS-16FJX45S........ 1-5/16 ..............116GS-20FJX45S........ 1-5/8 ................120GS-20FJX45-038... 1-5/8 ......... 1-1/424GSP-24FJX45-050. 1-7/8 ......... 1-1/2
Female JIC 37° Flare Swivel90° Bent Tube
P/Number ...................Thread....... Hose6GS-6FJX90S ............ 9/16 .............. 3/86GS-6FJX90L ............ 9/16 .............. 3/86GS-8FJX90M...........3/4 ................ 3/88GS-8FJX90S ............ 3/4 ................ 1/28GS-8FJX90M...........3/4 ................ 1/28GS-8FJX90L ............ 3/4 ................ 1/28GS-10FJX90S .......... 7/8 ................ 1/28GS-10FJX90M.........7/8 ................ 1/28GS-10FJX90L .......... 7/8 ................ 1/28GS-12FJX90S .......... 1-1/16........... 1/210GS-10FJX90S ........7/8 ................ 5/810GS-12FJX90M....... 1-1/16........... 5/812GS-12FJX90S ........1-1/16........... 3/412GS-12FJX90M....... 1-1/16........... 3/412GS-12FJX90L ........1-1/16........... 3/412GS-14FJX90-060 ...1-3/16........... 3/412GS-16FJX90S ........1-5/16........... 3/412GS-16FJX90M....... 1-5/16........... 3/416GS-16FJX90S ........1-5/16.............. 116GS-16FJX90M....... 1-5/16.............. 116GS-16FJX90L ........1-5/16.............. 116GS-20FJX90L ........1-5/8................ 120GS-20FJX90S ........1-5/8.......... 1-1/420GS-20FJX90M....... 1-5/8.......... 1-1/420GS-20FJX90L ........1-5/8.......... 1-1/424GSP-24FJX90-118 .1-7/8.......... 1-1/224GSP-24FJX90-089 .1-7/8.......... 1-1/232GSP-32FJX90M..... 2-1/2................ 2
Male Flat Face O-Ring
P/Number ...................Thread....... Hose6GS-6MFFOR............ 11/16............ 3/88GS-8MFFOR............ 13/16............ 1/212GS-12MFFOR........1-3/16........... 3/412GS-16MFFOR........1-7/16........... 3/416GS-16MFFOR........1-7/16.............. 120GS-20MFFOR........1-11/16...... 1-1/4
Female Flat Face Swivel
P/Number ...................Thread .......Hose6GS-6FFORX.............11/16 ............ 3/86GS-8FFORX.............13/16 ............ 3/88GS-8FFORX.............13/16 ............ 1/28GS-10FFORX...........1 ................... 1/28GS-12FFORX...........1-3/16........... 1/210GS-10FFORX.........1 ................... 5/812GS-10FFORX.........1 ................... 3/412GS-12FFORX.........1-3/16........... 3/412GS-16FFORX.........1-7/16........... 3/416GS-16FFORX.........1-7/16.............. 116GS-20FFORX.........1-11/16............ 120GS-20FFORX.........1-11/16......1-1/424GSP-24FFORX ......2 ................1-1/2
Female Flat Face Swivel45° Bent Tube
P/Number ...................Thread .......Hose6GS-6FFORX45S ......11/16 ............ 3/86GS-8FFORX45S ......13/16 ............ 3/88GS-8FFORX45S ......13/16 ............ 1/28GS-10FFORX45S ....1 ................... 1/210GS-10FFORX45S ..1 ................... 5/812GS-12FFORX45S ..1-3/16........... 3/412GS-16FFORX45S ..1-7/16........... 3/416GS-16FFORX45S ..1-7/16.............. 116GS-20FFORX45S ..1-11/16............ 120GS-20FFORX45S ..1-11/16......1-1/424GSP-24FFORX45-036 2 .........1-1/2
Section 3 Global-Crimp GS & GSP Couplings - Two Piece
*Supply To Order - Minimum Order Quantities May Apply 3.21
Female Flat Face Swivel90° Bent Tube
P/Number ...................Thread....... Hose6GS-6FFORX90S ......11/16 ............ 3/86GS-6FFORX90L......11/16 ............ 3/86GS-8FFORX90M.....13/16 ............ 3/88GS-8FFORX90S ......13/16 ............ 1/28GS-8FFORX90-083 .13/16 ............ 1/28GS-10FFORX90M...1 ................... 1/28GS-12FFORX90S ....1-3/16........... 1/210GS-10FFORX90M.1 ................... 5/810GS-10FFORX90L..1 ................... 5/812GS-10FFORX90S ..1 ................... 3/412GS-12FFORX90S ..1-3/16........... 3/412GS-12FFORX90M.1-3/16........... 3/412GS-12FFORX90L..1-3/16........... 3/412GS-16FFORX90S ..1-7/16........... 3/412GS-16FFORX90L..1-7/16........... 3/416GS-16FFORX90S ..1-7/16.............. 116GS-16FFORX90M.1-7/16.............. 116GS-16FFORX90L..1-7/16.............. 116GS-20FFORX90M.1-11/16............ 120GS-20FFORX90S ..1-11/16......1-1/420GS-20FFORX90M.1-11/16......1-1/420GS-20FFORX90L..1-11/16......1-1/424GSP-24FFORX90M 2.............1-1/224GSP-24FFORX90L 2 .............1-1/2
Male 24° Cone - Heavy Series
P/Number .............Thread ............. Hose6GS-12MDH........M20 x 1.5........... 3/86GS-14MDH........M22 x 1.5........... 3/88GS-16MDH........M24 x 1.5........... 1/210GS-20MDH......M30 x 2.0........... 5/812GS-20MDH......M30 x 2.0........... 3/412GS-25MDH......M36 x 2.0........... 3/412GS-30MDH......M42 x 2.0........... 3/416GS-25MDH......M36 x 2.0.............. 116GS-30MDH......M42 x 2.0.............. 120GS-38MDH......M52 x .20........1-1/4
Female DIN 24° Cone SwivelHeavy Series With O-Ring
P/Number....................Thread .......Hose6GS-12FDHORX .......M20 x 1.5.....3/86GS-14FDHORX .......M22 x 1.5.....3/88GS-14FDHORX .......M22 x 1.5.....1/28GS-16FDHORX .......M24 x 1.5.....1/28GS-20FDHORX .......M30 x 2.0.....1/210GS-20FDHORX .....M30 x 2.0.....5/810GS-25FDHORX .....M36 x 2.0.....5/812GS-20FDHORX .....M30 x 2.0.....3/412GS-25FDHORX .....M36 x 2.0.....3/416GS-25FDHORX .....M36 x 2.0........ 116GS-30FDHORX .....M42 x 2.0........ 120GS-38FDHORX .....M52 x 2.0..1-1/424GS-38FDHORX .....M52 x 2.0..1-1/2
Female DIN 24° Cone SwivelHeavy Series With O-Ring
45° Bent Tube
P/Number....................Thread .......Hose6GS-12FDHORX45 ...M20 x 1.5.....3/86GS-14FDHORX45 ...M22 x 1.5.....3/88GS-16FDHORX45 ...M24 x 1.5.....1/210GS-20FDHORX45 .M30 x 2.0.....5/812GS-20FDHORX45 .M30 x 2.0.....3/412GS-25FDHORX45 .M36 x 2.0.....3/416GS-25FDHORX45 .M36 x 2.0........ 116GS-30FDHORX45 .M42 x 2.0........ 120GS-38FDHORX45 .M52 x 2.0..1-1/4
Female DIN 24° Cone SwivelHeavy Series With O-Ring
90° Bent Tube
P/Number........................Thread...Hose6GS-12FDHORX90 .......M20..........3/86GS-14FDHORX90 .......M22..........3/88GS-16FDHORX90M....M24..........1/210GS-20FDHORX90M..M30..........5/812GS-20FDHORX90M..M30..........3/412GS-25FDHORX90M..M36..........3/416GS-25FDHORX90M..M36..........3/416GS-30FDHORX90M..M42.............120GS-38FDHORX90 .....M52...... 1-1/4
Section 3Global-Crimp GS & GSP Couplings - Two Piece
3.22 *Supply To Order - Minimum Order Quantities May Apply
Code 61 O-Ring Flange
P/Number................... Flange........Hose6GS-8FL .................... 1/2.................3/88GS-8FL .................... 1/2.................1/28GS-12FL .................. 3/4.................1/28GS-10FLK ............... 5/8.................1/210GS-10FLK ............. 5/8.................5/810GS-12FL ................ 3/4.................5/812GS-8FL .................. 1/2.................3/412GS-10FLK ............. 5/8.................3/412GS-12FL ................ 3/4.................3/412GS-16FL ................ 1....................3/412GS-20FL ................ 1-1/4 .............3/416GS-16FL ................ 1.......................116GS-20FL ................ 1-1/4 ................116GS-24FL ................ 1-1/2 ................120GS-16FL ................ 1................ 1-1/420GS-20FL ................ 1-1/4 ......... 1-1/420GS-24FL ................ 1-1/2 ......... 1-1/424GSP-20FL.............. 1-1/4 ......... 1-1/224GSP-24FL.............. 1-1/2 ......... 1-1/224GSP-32FL.............. 2................ 1-1/232GSP-24FL.............. 1-1/2 ................232GSP-32FL.............. 2.......................232GSP-40FL.............. 2-1/2 ................2
Code 61 O-Ring Flange22.5° Bent Tube
P/Number................... Flange........Hose8GS-8FL22M............. 1/2.................1/212GS-12FL22M......... 3/4.................3/412GS-16FL22M......... 1....................3/416GS-16FL22M......... 1.......................116GS-20FL22M......... 1-1/4 ................120GS-20FL22M......... 1-1/4 ......... 1-1/420GS-24FL22M......... 1-1/2 ......... 1-1/424GSP-24FL22M ...... 1-1/2 ......... 1-1/224GSP-32FL22M ...... 2................ 1-1/232GSP-32FL22M ...... 2.......................2
Code 61 O-Ring Flange30° Bent Tube
P/Number................... Flange........Hose8GS-12FL30M........... 3/4.................1/212GS-12FL30M......... 3/4.................3/412GS-16FL30M......... 1....................3/416GS-16FL30M......... 1.......................116GS-20FL30M......... 1-1/4 ................120GS-20FL30M......... 1-1/4 ......... 1-1/420GS-24FL30M......... 1-1/2 ......... 1-1/424GSP-24FL30S........ 1-1/2 ......... 1-1/224GSP-32FL30M ...... 2................ 1-1/232GSP-32FL30M ...... 2.......................2
Code 61 O-Ring Flange45° Bent Tube
P/Number ...................Flange ....... Hose6GS-8FL45M.............1/2 ................ 3/88GS-8FL45M.............1/2 ................ 1/28GS-12FL45M...........3/4 ................ 1/210GS-10FLK45-026 ..5/8 ................ 5/810GS-12FL45M.........3/4 ................ 5/812GS-12FL45M.........3/4 ................ 3/412GS-16FL45S .......... 1 ................... 3/416GS-16FL45M.........1 ...................... 116GS-20FL45M.........1-1/4................ 120GS-16FL45M.........1 ................ 1-1/420GS-20FL45S .......... 1-1/4.......... 1-1/420GS-24FL45S .......... 1-1/2.......... 1-1/424GSP-24FL45S ........1-1/2.......... 1-1/224GSP-32FL45S ........2 ................ 1-1/232GSP-24FL45S ........1-1/2................ 232GSP-32FL45\ .........2 ...................... 2
Code 61 O-Ring Flange60° Bent Tube
P/Number ...................Flange ....... Hose8GS-8FL60M.............1/2 ................ 1/212GS-12FL60M.........3/4 ................ 3/412GS-16FL60M.........1 ................... 3/416GS-16FL60M.........1 ...................... 116GS-20FL60M.........1-1/4................ 120GS-20FL60M.........1-1/4.......... 1-1/420GS-24FL60M.........1-1/2.......... 1-1/424GSP-24FL60S ........1-1/2.......... 1-1/224GSP-32FL60S ........2 ................ 1-1/232GSP-32FL60S ........2 ...................... 2
Code 61 O-Ring Flange67.5° Bent Tube
P/Number ...................Flange ....... Hose12GS-12FL67M.........3/4 ................ 3/412GS-16FL67M.........1 ................... 3/416GS-16FL67M.........1 ...................... 116GS-20FL67M.........1-1/4................ 120GS-20FL67M.........1-1/4.......... 1-1/424GSP-24FL67S ........1-1/2.......... 1-1/224GSP-32FL67S ........2 ................ 1-1/232GSP-32FL67S ........2 ...................... 2
Code 61 O-Ring Flange90° Bent Tube
P/Number ...................Flange .......Hose6GS-8FL90M .............1/2 ................ 3/88GS-8FL90M .............1/2 ................ 1/28GS-8FL90L ..............1/2 ................ 1/28GS-12FL90M ...........3/4 ................ 1/210GS-10FLK90-055...5/8 ................ 5/810GS-12FL90M .........3/4 ................ 5/812GS-8FL90-050 .......1/2 ................ 3/412GS-10FLK90-055...5/8 ................ 3/412GS-12FL90M .........3/4 ................ 3/412GS-12FL90-100 .....3/4 ................ 3/412GS-12FL90-125 .....3/4 ................ 3/412GS-16FL90S...........1 ................... 3/412GS-16FL90M .........1 ................... 3/412GS-20FL90-054 .....1-1/4............. 3/416GS-16FL90S...........1 ...................... 116GS-16FL90M .........1 ...................... 116GS-16FL90-120 .....1 ...................... 116GS-20FL90S...........1-1/4................ 116GS-20FL90M .........1-1/4................ 116GS-24FL90S...........1-1/2................ 116GS-24FL90-060 .....1-1/2................ 120GS-16FL90M .........1 ................1-1/420GS-20FL90S...........1-1/4..........1-1/420GS-20FL90M .........1-1/4..........1-1/420GS-20FL90-168 .....1-1/4..........1-1/420GS-24FL90S...........1-1/2..........1-1/420GS-24FL90-118 .....1-1/2..........1-1/424GSP-24FL90M .......1-1/2..........1-1/224GSP-32FL90-080 ...2 ................1-1/224GSP-32FL90-170 ...2 ................1-1/232GSP-24FL90S ........1-1/2................ 232GSP-32FL90-114 ...2 ...................... 232GSP-32FL90-165 ...2 ...................... 232GSP-32FL90-200 ...2 ...................... 232GSP-40FL90-110 ...2-1/2................ 2
Code 61 O-Ring Flange110° Bent Tube
P/Number ...................Flange .......Hose12GS-12FL110-064 ...3/4 ................ 3/416GS-16FL110-073 ...1 ...................... 120GS-20FL110-080 ...1-1/4..........1-1/420GS-24FL110-080 ...1-1/2..........1-1/424GSP-24FL110-094 .1-1/2..........1-1/232GSP-32FL110.........2 ...................... 2
Section 3 Global-Crimp GS & GSP Couplings - Two Piece
*Supply To Order - Minimum Order Quantities May Apply 3.23
Code 62 O-Ring Flange Heavy
P/Number ...................Flange ....... Hose8GS-8FLH..................1/2 ................ 1/28GS-12FLH................3/4 ................ 1/210GS-8FLH................1/2 ................ 5/812GS-12FLH..............3/4 ................ 3/412GS-16FLH..............1 ................... 3/416GS-12FLH..............3/4 ................... 116GS-16FLH..............1 ...................... 116GS-20FLH..............1-1/4................ 120GS-16FLH..............1 ................1-1/420GS-20FLH..............1-1/4..........1-1/420GS-24FLH..............1-1/2..........1-1/424GSP-24FLH ...........1-1/2..........1-1/224GSP-32FLH ...........2 ................1-1/232GSP-32FLH ...........2 ...................... 2
Code 62 O-Ring Flange Heavy22.5° Bent Tube
P/Number ...................Flange ....... Hose16GS-16FLH22M ......1 ...................... 120GS-20FLH22M ......1-1/4..........1-1/420GS-24FLH22M ......1-1/2..........1-1/4
Code 62 O-Ring Flange Heavy30° Bent Tube
P/number ....................Flange ....... Hose16GS-16FLH30M ......1 ...................... 120GS-20FLH30M ......1-1/4..........1-1/420GS-24FLH30M ......1-1/2..........1-1/4
Code 62 O-Ring Flange Heavy45° Bent Tube
P/number ....................Flange........Hose8GS-8FLH45M ..........1/2 ................1/28GS-12FLH45M ........3/4 ................1/210GS-12FLH45M ......3/4 ................5/812GS-12FLH45M ......3/4 ................3/412GS-16FLH45M ......1 ...................3/416GS-16FLH45M ......1 ...................... 116GS-20FLH45M ......1-1/4 ................ 120GS-20FLH45M ......1-1/4 ..........1-1/420GS-24FLH45M ......1-1/2 ..........1-1/424GSP-24FLH45M ....1-1/2 ..........1-1/224GSP-32FLH45S......2 ................1-1/232GSP-32FLH45-066 2 ................... 2
Code 62 O-Ring Flange Heavy60° Bent Tube
P/Number....................Flange........Hose12GS-12FLH60M ......3/4 ................3/412GS-16FLH60M ......1 ...................3/416GS-16FLH60M ......1 ...................... 120GS-20FLH60M ......1-1/4 ..........1-1/420GS-24FLH60M ......1-1/2 ..........1-1/4
Code 62 O-Ring Flange Heavy90° Bent Tube
P/Number................... Flange........Hose8GS-8FLH90M.......... 1/2.................1/28GS-8FLH90-080 ...... 1/2.................1/28GS-12FLH90M........ 3/4.................1/210GS-8FLH90M........ 1/2.................5/810GS-12FLH90M...... 3/4.................5/812GS-12FLH90M...... 3/4.................3/412GS-16FLH90M...... 1....................3/416GS-12FLH90M...... 3/4....................116GS-16FLH90S ....... 1.......................116GS-16FLH90M...... 1.......................116GS-16FLH90-120 .. 1.......................116GS-20FLH90S ....... 1-1/4 ................116GS-20FLH90M...... 1-1/4 ................116GS-24FLH90S ....... 1-1/2 ................120GS-16FLH90S ....... 1................ 1-1/420GS-16FLH90M...... 1................ 1-1/420GS-16FLH90-100 .. 1................ 1-1/420GS-20FLH90-076 .. 1-1/4 ......... 1-1/420GS-20FLH90M...... 1-1/4 ......... 1-1/420GS-20FLH90-120 .. 1-1/4 ......... 1-1/420GS-24FLH90S ....... 1-1/2 ......... 1-1/424GSP-24FLH90-094 1-1/2 ......... 1-1/224GSP-32FLH90S..... 2................ 1-1/232GSP-32FLH90M.... 2.......................2
Section 3Global-Crimp GS & GSP Couplings - Two Piece
3.24 *Supply To Order - Minimum Order Quantities May Apply
Caterpillar Style O-Ring Flange
P/Number................... Flange........Hose12GS-12FLC.............. 3/4.................3/412GS-16FLC.............. 1....................3/416GS-16FLC.............. 1.......................116GS-20FLC.............. 1-1/4 ................120GS-20FLC.............. 1-1/4 ......... 1-1/420GS-24FLC.............. 1-1/2 ......... 1-1/4
Caterpillar Style O-Ring Flange - 22.5° Bent Tube
P/Number................... Flange........Hose12GS-12FLC22-016 .. 3/4.................3/416GS-16FLC22-017 .. 1.......................116GS-20FLC22-017 .. 1-1/4 ................120GS-20FLC22-017 .. 1-1/4 ......... 1-1/420GS-24FLC22-017 .. 1-1/2 ......... 1-1/4
Caterpillar Style O-Ring Flange - 30° Bent Tube
P/Number................... Flange........Hose12GS-12FLC30-022 .. 3/4.................3/412GS-16FLC30-022 .. 1....................3/416GS-16FLC30-023 .. 1.......................116GS-20FLC30-023 .. 1-1/4 ................120GS-20FLC30-024 .. 1-1/4 ......... 1-1/420GS-24FLC30-024 .. 1-1/2 ......... 1-1/4
Caterpillar Style O-Ring Flange - 45° Bent Tube
P/Number ...................Flange ....... Hose12GS-12FLC45-035...3/4 ................ 3/412GS-16FLC45-035...1 ................... 3/416GS-16FLC45-037...1 ...................... 116GS-20FLC45-037...1-1/4................ 120GS-20FLC45-037...1-1/4.......... 1-1/420GS-24FLC45-037...1-1/2.......... 1-1/4
Caterpillar Style O-Ring Flange - 60° Bent Tube
P/Number ...................Flange ....... Hose12GS-16FLC60-048...1 ................... 3/416GS-16FLC60-050...1 ...................... 116GS-20FLC60-050...1-1/4................ 120GS-20FLC60-052...1-1/4.......... 1-1/420GS-24FLC60-052...1-1/2.......... 1-1/4
Caterpillar Style O-Ring Flange - 67.5° Bent Tube
P/Number ...................Flange ....... Hose16GS-16FLC67-057...1 ...................... 116GS-20FLC67-057...1-1/4................ 120GS-20FLC67-059...1-1/4.......... 1-1/420GS-24FLC67-059...1-1/2.......... 1-1/4
Caterpillar Style O-Ring Flange - 90° Bent Tube
P/Number ...................Flange .......Hose12GS-12FLC90-068...3/4 ................ 3/412GS-12FLC90-128...3/4 ................ 3/412GS-16FLC90-068...1 ................... 3/416GS-16FLC90-074...1 ...................... 116GS-16FLC90-132...1 ...................... 116GS-20FLC90-074...1-1/4................ 120GS-20FLC90-077...1-1/4..........1-1/420GS-24FLC90-077...1-1/2..........1-1/4
Section 3 Global-Crimp GSM Couplings - One Piece
*Manufactured To Order - Minimum Order Quantities May Apply 3.25
Male PipeNPTF 30° Cone Seat
P/Number ...................Thread....... Hose24GSM-24MP............1-1/2..........1-1/232GSM-32MP............2 ...................... 2
Male JIC 37° Flare
P/Number ...................Thread....... Hose24GSM-24MJ.............1-7/8..........1-1/232GSM-32MJ.............2-1/2................ 2
Female JIC 37° Flare Swivel
P/Number ...................Thread....... Hose24GSM-24FJX ...........1-7/8..........1-1/232GSM-32FJX ...........2-1/2................ 2
Female JIC 37° Flare Swivel45° Bent Tube
P/Number ...................Thread....... Hose24GSM-24FJX45-034.. 1-7/8 .......1-1/2
Female JIC 37° Flare Swivel90° Bent Tube
P/Number....................Thread .......Hose24GSM-24FJX90M....1-7/8 ..........1-1/2
Female BSPP Swivel
P/Number...................... Thread ....Hose24GSM-24FBSPORX .. 1-1/2 .......1-1/232GSM-32FBSPORX .. 2.................... 2
Female Flat Face Swivel(4000 psi limited)
P/Number....................Thread .......Hose24GSM-24FFORX/4K 2 ...........1-1/2
Female Flat Face Swivel45° Bent Tube
(4000 psi limited)
P/Number....................Thread .......Hose24GSM-24FFORX45/4K 2 .......1-1/2
Female Flat Face Swivel90° Bent Tube
(4000 psi limited)
P/Number........................Thread...Hose24GSM-24FFORX90M/4K 2.... 1-1/2
Female DIN 24° Cone SwivelHeavy Series with O-Ring
P/Number................... Thread .......Hose24GSM-38FDHORX. 38mm ... 1-1/2
Female DIN 24° Cone SwivelHeavy Series with O-Ring
45°Bent Tube
P/Number................... Thread .......Hose24GSM-38FDHORX45 38mm.. 1-1/2
Female DIN 24° Cone SwivelHeavy Series with O-Ring
90°Bent Tube
P/Number................... Thread .......Hose24GSM-38FDHORX90 38mm.. 1-1/2
Section 3 Global-Crimp GSM Couplings - One Piece
3.26 *Manufactured To Order - Minimum Order Quantities May Apply
Code 61 O-Ring Flange
P/Number................... Flange........Hose24GSM-24FL............. 1-1/2 ......... 1-1/224GSM-32FL............. 2................ 1-1/232GSH-32FL ............. 2.......................2
Code 61 O-Ring Flange30° Bent Tube
P/Number................... Flange........Hose24GSM-24FL30M ..... 1-1/2 ......... 1-1/2
Code 61 O-Ring Flange45° Bent Tube
P/Number................... Flange........Hose24GSM-24FL45M ..... 1-1/2 ......... 1-1/224GSM-32FL45......... 2................ 1-1/232GSM-32FL45M ..... 2.......................2
Code 61 O-Ring Flange60° Bent Tube
P/Number................... Flange........Hose24GSM-24FL60M ..... 1-1/2 ......... 1-1/2
Code 61 O-Ring Flange90° Bent Tube
P/Number ...................Flange ....... Hose24GSM-24FL90S....... 1-1/2.......... 1-1/232GSM-32FL90-130..2 ...................... 2
Code 62 O-Ring Flange Heavy
P/Number ...................Flange ....... Hose24GSM-24FLH .......... 1-1/2.......... 1-1/224GSM-32FLH .......... 2 ................ 1-1/232GSM-32FLH .......... 2 ...................... 232GSM-32FLHCFM..2 ...................... 2
Code 62 O-Ring Flange Heavy30° Bent Tube
P/number ....................Flange ....... Hose24GSM-24FLH30 ......1-1/2.......... 1-1/232GSM-32FLH30M...2 ...................... 2
Code 62 O-Ring Flange Heavy45° Bent Tube
P/number ....................Flange ....... Hose24GSM-24FLH45M...... 1-1/2 ...... 1-1/224GSM-32FLH45M...... 2 ............. 1-1/232GSM-32FLH45-063.. 2 ................... 232GSM-32FLHCFM45-063 ............... 2
Code 62 O-Ring Flange Heavy60° Bent Tube
P/Number ...................Flange .......Hose24GSM-24FLH60M...1-1/2..........1-1/232GSM-32FLH60M...2 ...................... 2
Code 62 O-Ring Flange Heavy90° Bent Tube
P/Number ...................... Flange ....Hose24GSM-24FLH90-094 .. 1-1/2.......1-1/224GSM-24FLH90-150 .. 1-1/2.......1-1/224GSM-32FLH90S ....... 2 .............1-1/232GSM-32FLH90M...... 2 ................... 232GSM-32FLH90-159 .. 2 ................... 232GSM-32FLHCFM90-120................ 2
Section 3 Global-Crimp GSM Couplings - One Piece
*Manufactured To Order - Minimum Order Quantities May Apply 3.27
Caterpillar Style O-Ring Flange
P/Number ...................Flange ....... Hose24GSM-24FLC ..........1-1/2..........1-1/232GSM-32FLC ..........2 ...................... 2
Caterpillar Style O-Ring Flange - 22.5° Bent Tube
P/Number ......................Flange..... Hose24GSM-24FLC22-017 ..1-1/2 .......1-1/2
Caterpillar Style O-Ring Flange - 30° Bent Tube
P/Number ...................... Flange.... Hose24GSM-24FLC30-023 .. 1-1/2 ......1-1/2
Caterpillar Style O-Ring Flange - 45° Bent Tube
P/Number........................ Flange ...Hose24GSM-24FLC45-039 ... 1-1/2......1-1/232GSM-32FLC45-064 ... 2 .................. 2
Caterpillar Style O-Ring Flange - 60° Bent Tube
P/Number.......................Flange ....Hose24GSM-24FLC60-055 ..1-1/2.......1-1/232GSM-32FLC60-083 ..2 ................... 2
Caterpillar Style O-Ring Flange - 90° Bent Tube
P/Number....................... Flange ....Hose24GSM-24FLC90-087 .. 1-1/2 ......1-1/232GSM-32FLC90-130 .. 2................... 2
Section 3 Maxi-Crimp PCM Couplings - Two Piece
3.28 *Supply To Order - Minimum Order Quantities May Apply
Ferrule PCM(Skiving Required)
C12, G5K, G6K
P/Number................... ...................Hose24PCM-G6K.............. .................. 1-1/224PCM-2F ................. .................. 1-1/232PCM-2F ................. .........................2
Male PipeNPTF 30° Cone Seat
P/Number................... Thread .......Hose24PCM-24MP............ 1-1/2 ......... 1-1/232PCM-32MP............ 2.......................2
Male JIC 37° Flare
P/Number................... Thread .......Hose24PCM-24MJ ............ 1-7/8 ......... 1-1/232PCM-32MJ ............ 2-1/2 ................2
Female JIC 37° Flare Swivel
P/Number................... Thread .......Hose24PCM-24FJX........... 1-7/8 ......... 1-1/232PCM-32FJX........... 2-1/2 ................2
Female JIC 37° Flare Swivel90° Bent Tube
P/Number................... Thread .......Hose24PCM-24FJX90....... 1-7/8 ......... 1-1/2
Female Flat Face Swivel
P/Number ...................Thread....... Hose24PCM-24FFORX.........2 ............ 1-1/2
Female Flat Face Swivel90° Bent Tube
P/Number ....................... Thread .. Hose24PCM-24FFORX90M ..... 2........ 1-1/2
Code 61 O-Ring Flange
P/Number ...................Flange ....... Hose24PCM-24FL .............1-1/2.......... 1-1/224PCM-32FL .............2 ................ 1-1/232PCM-32FL .............2 ...................... 2
Code 61 O-Ring Flange30° Bent Tube
P/Number ...................Flange ....... Hose24PCM-24FL30 .........1-1/2.......... 1-1/2
Code 61 O-Ring Flange45° Bent Tube
P/Number ...................Flange ....... Hose24PCM-24FL45 .........1-1/2.......... 1-1/224PCM-32FL45 .........2 ................ 1-1/232PCM-32FL45 .........2 ...................... 2
Code 61 O-Ring Flange60° Bent Tube
P/Number ...................Flange .......Hose24PCM-24FL60 .........1-1/2..........1-1/2
Code 61 O-Ring Flange90° Bent Tube
P/Number ...................Flange .......Hose24PCM-24FL90 .........1-1/2..........1-1/232PCM-32FL90 .........2 ...................... 2
Section 3 Maxi-Crimp PCM Couplings - Two Piece
*Supply To Order - Minimum Order Quantities May Apply 3.29
Code 62 O-Ring Flange Heavy
P/Number ...................Flange ....... Hose24PCM-24FLH ..........1-1/2..........1-1/224PCM-32FLH ..........2 ................1-1/232PCM-32FLH ..........2 ...................... 2
Code 62 O-Ring Flange Heavy22.5° Bent Tube
P/Number ...................Flange ....... Hose24PCM-24FLH22 ......1-1/2..........1-1/2
Code 62 O-Ring Flange Heavy30° Bent Tube
P/number ....................Flange ....... Hose24PCM-24FLH30 ......1-1/2..........1-1/232PCM-32FLH30 ......2 ...................... 2
Code 62 O-Ring Flange Heavy45° Bent Tube
P/number ....................Flange ....... Hose24PCM-24FLH45 ......1-1/2..........1-1/224PCM-32FLH45 ......2 ................1-1/232PCM-32FLH45 ......2 ...................... 2
Code 62 O-Ring Flange Heavy60° Bent Tube
P/Number ...................Flange ....... Hose24PCM-24FLH60 ......1-1/2..........1-1/232PCM-32FLH60 ......2 ...................... 2
Code 62 O-Ring Flange Heavy90° Bent Tube
P/Number....................Flange........Hose24PCM-24FLH90M ...1-1/2 ..........1-1/224PCM-32FLH90M ...2 ................1-1/232PCM-32FLH90M ...2 ...................... 232PCM-32FLH90L ....2 ...................... 2
Caterpillar Style O-Ring Flange
P/Number....................Flange........Hose24PCM-24FLC...........1-1/2 ..........1-1/232PCM-32FLC...........2 ...................... 2
Caterpillar Style O-Ring Flange - 22.5° Bent Tube
P/Number....................Flange........Hose24PCM-24FLC22.......1-1/2 ..........1-1/2
Caterpillar Style O-Ring Flange - 30° Bent Tube
P/Number....................Flange........Hose24PCM-24FLC30.......1-1/2 ..........1-1/2
Caterpillar Style O-Ring Flange - 45° Bent Tube
P/Number................... Flange........Hose24PCM-24FLC45 ...... 1-1/2 ......... 1-1/232PCM-32FLC45 ...... 2.......................2
Caterpillar Style O-Ring Flange - 60° Bent Tube
P/Number................... Flange........Hose24PCM-24FLC60 ...... 1-1/2 ......... 1-1/232PCM-32FLC60 ...... 2.......................2
Caterpillar Style O-Ring Flange - 90° Bent Tube
P/Number................... Flange........Hose24PCM-24FLC90 ...... 1-1/2 ......... 1-1/232PCM-32FLC90 ...... 2.......................2
Section 3 Vacu-Crimp GL Couplings - One Piece
3.30 *Supply To Order - Minimum Order Quantities May Apply
Code 61 O-Ring Flange
P/Number................... Flange........Hose40GL-40FL................ 2-1/2 ......... 2-1/240GL-48FL................ 3................ 2-1/240GL-56FL................ 3-1/2 ......... 2-1/248GL-48FL................ 3.......................356GL-56FL................ 3-1/2 ......... 3-1/264GL-64FL................ 4.......................4
Code 61 O-Ring Flange22.5° Bent Tube
P/Number................... Flange........Hose40GL-40FL22 ............ 2-1/2 ......... 2-1/240GL-48FL22 ............ 3................ 2-1/248GL-48FL22 ............ 3.......................3
Code 61 O-Ring Flange30° Bent Tube
P/Number................... Flange........Hose40GL-40FL30 ............ 2-1/2 ......... 2-1/240GL-48FL30 ............ 3................ 2-1/248GL-48FL30 ............ 3.......................3
Code 61 O-Ring Flange45° Bent Tube
P/Number ...................Flange ....... Hose40GL-40FL45 ............ 2-1/2.......... 2-1/240GL-48FL45 ............ 3 ................ 2-1/248GL-48FL45 ............ 3 ...................... 348GL-56FL45 ............ 3-1/2................ 356GL-56FL45 ............ 3-1/2.......... 3-1/256GL-64FL45 ............ 4 ................ 3-1/2
Code 61 O-Ring Flange60° Bent Tube
P/Number ...................Flange ....... Hose40GL-40FL60 ............ 2-/2............ 2-1/248GL-48FL60 ............ 3 ...................... 3
Code 61 O-Ring Flange67.5° Bent Tube
P/Number ...................Flange ....... Hose40GL-40FL67 ............ 2-/2............ 2-1/248GL-48FL67 ............ 3 ...................... 364GL-64FL67 ............ 4 ...................... 4
Code 61 O-Ring Flange90° Bent Tube
P/Number ...................Flange .......Hose40GL-40FL90.............2-1/2..........2-1/240GL-48FL90.............3 ................2-1/248GL-48FL90.............3 ...................... 356GL-56FL90.............3-1/2..........3-1/264GL-64FL90.............4 ...................... 4
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.1
Contents
Part No. ................. Description...........................................................................................................................Page
Section 4Adaptors
NIPPLESC1 ..........................JIC x JIC .............................................................................................................................. 4.9F1...........................ORFS x ORFS ..................................................................................................................... 4.9CB1........................BSPT x BSPT ...................................................................................................................... 4.9CR1........................BSPP x BSPP Encapsulated Seal ........................................................................................ 4.9CP1 ........................BSPP x BSPP ...................................................................................................................... 4.9ZCR1 .....................BSPP x BSPP Adjustable .................................................................................................... 4.9CPJ1.......................JIS x JIS (BSPP x BSPP)..................................................................................................... 4.9CPB1 .....................BSPP x BSPT ...................................................................................................................... 4.10CN1 .......................NPTF x NPTF...................................................................................................................... 4.10CRB1 .....................BSPP x BSPT Encapsulated Seal ........................................................................................ 4.10CPN1 .....................BSPP x NPTF ...................................................................................................................... 4.10CU1 .......................UNO x UNO Adjustable ..................................................................................................... 4.10C2 ..........................JIC x JIC BULKHEAD ....................................................................................................... 4.10ZC2........................UNO x JIC BULKHEAD Extended.................................................................................... 4.10F2...........................ORFS x ORFS BULKHEAD .............................................................................................. 4.10CA2 .......................SAE x SAE BULKHEAD ................................................................................................... 4.11ZCR2 .....................BSPP x JIC BULKHEAD ................................................................................................... 4.11CB2........................BSPT x JIC .......................................................................................................................... 4.11CBA2.....................BSPT x SAE ........................................................................................................................ 4.11CBJ2 ......................BSPT x JAP......................................................................................................................... 4.11CR2........................BSPP x JIC Encapsulated Seal ............................................................................................ 4.11CP2 ........................BSPP x JIC .......................................................................................................................... 4.12ZCP2......................BSPP x JIC 1.5mm Orifice.................................................................................................. 4.12CP2-E ....................BSPP x JIC Extended .......................................................................................................... 4.12CM2.......................DIN x JIC ............................................................................................................................ 4.12CM2L ....................DKL x JIC ........................................................................................................................... 4.12CM2S.....................DKS x JIC............................................................................................................................ 4.12CMP2L ..................DKL x BSPP........................................................................................................................ 4.12CMP2S ..................DKS x BSPP........................................................................................................................ 4.13CN2 .......................NPTF x JIC.......................................................................................................................... 4.13FP2.........................BSPP x ORFS...................................................................................................................... 4.13C3 ..........................SAE ‘O’ Ring Boss x JIC ................................................................................................... 4.13F3...........................SAE ‘O’ Ring Boss x ORFS M/M ...................................................................................... 4.14CB3........................SAE ‘O’ Ring Boss x BSPT................................................................................................ 4.14CN3 .......................SAE ‘O’ Ring Boss x NPTF................................................................................................ 4.14C4 ..........................SAE ‘O’ Ring Boss x JIC EXTENDED.............................................................................. 4.14CB4........................BSPT x LP Straight Hose Tail............................................................................................. 4.14CM4.......................DIN x LP Straight Hose Tail ............................................................................................... 4.14CN4 .......................NPTF x LP Straight Hose Tail ............................................................................................ 4.15CP4 ........................BSPP x LP Straight Hose Tail............................................................................................. 4.15C5 ..........................SAE ‘O’ Ring Boss x LP Straight Hose Tail ...................................................................... 4.15CB5........................BSPT x LP Straight Hose Tail............................................................................................. 4.15CP6 ........................BSPP Bulkhead ................................................................................................................... 4.15CR6........................BSPP x BSPP Bulkhead Encapsulated Seal ........................................................................ 4.15F7...........................ORFS x JIC M/M ................................................................................................................ 4.15
SOCKETSC9 ..........................SAE ‘O’ Ring Boss ............................................................................................................. 4.16CB9........................BSPT.................................................................................................................................... 4.16CN9 .......................NPTF ................................................................................................................................... 4.16CP9 ........................BSPP.................................................................................................................................... 4.16
HALF SOCKETSC14 ........................SAE ‘O’ Ring Boss ............................................................................................................. 4.16CB14......................BSPT.................................................................................................................................... 4.16CP14 ......................BSPP.................................................................................................................................... 4.16CN14 .....................NPTF ................................................................................................................................... 4.16
4.2 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Section 4Adaptors
Contents
Part No. ................. Description .......................................................................................................................... Page
FIXED ADAPTORSCB18 ......................BSPT x BSPT M/F ..............................................................................................................4.16CPN18....................BSPP x NPTF ......................................................................................................................4.16CN18......................NPTF x NPTF M/F ..............................................................................................................4.17CB20 ......................BSPT x JIC F/M ..................................................................................................................4.17CP20 ......................BSPP X JIC F/M..................................................................................................................4.17CN20......................NPTF x JIC F/M ..................................................................................................................4.17CB21 ......................SAE ‘O’ Ring Boss x BSPT M/F ........................................................................................4.17CN21......................SAE ‘O’ Ring Boss x NPTF M/F ........................................................................................4.17C22.........................JIC x JIC F/M ......................................................................................................................4.17CB22 ......................SAE ‘O’ Ring Boss x BSPT F/M ........................................................................................4.17CN22......................SAE ‘O’ Ring Boss x NPTF F/M ........................................................................................4.18
STRAIGHT UNIONSCB24 ......................BSPT x BSPP M/F...............................................................................................................4.18CR24 ......................BSPP x BSPP M/F...............................................................................................................4.18CP24 ......................BSPP x BSPP M/F...............................................................................................................4.18CP24G....................BSPP x BSPP M/F with 7/16" UNO Gauge Point ..............................................................4.18CN24......................NPTF x NPSM M/F.............................................................................................................4.18CB25 ......................BSPT x BSPP F/F ................................................................................................................4.18CN25......................NPTF x NPSM F/F ..............................................................................................................4.18CS25 ......................JIC x JIC F/F........................................................................................................................4.18C26.........................SAE ‘O’ Ring Boss x JIC M/F ............................................................................................4.18CB26 ......................SAE ‘O’ Ring Boss x BSPP M/F.........................................................................................4.18CN26......................SAE ‘O’ Ring Boss x NPSM M/F .......................................................................................4.19C27G......................JIC x JIC M/F with 7/16" UNO Gauge Point ......................................................................4.19CB27 ......................BSPT x JIC M/F ..................................................................................................................4.19CP27 ......................BSPP x JIC M/F...................................................................................................................4.19CN27......................NPTF x JIC M/F ..................................................................................................................4.19CR27 ......................BSPP x JIC Encapsulated Seal ............................................................................................4.19F27G ......................ORFS x ORFS M/F with 7/16" UNO Gauge Point .............................................................4.19CP28 ......................BSPP x JIC F/F Gauge.........................................................................................................4.19F28 .........................ORFS x JIC M/F ..................................................................................................................4.19F29 .........................ORFS x JIC F/M ..................................................................................................................4.19
45° UNIONSC30.........................JIC x JIC M/F ......................................................................................................................4.20CB30 ......................BSPT x BSPP M/F...............................................................................................................4.20CN30......................NPTF x NPSM M/F.............................................................................................................4.20C31.........................SAE ‘O’ Ring Boss x JIC M/F ............................................................................................4.20CN31......................SAE ‘O’ Ring Boss x NPSM M/F .......................................................................................4.20
45° ELBOWSCB36 ......................BSPT x BSPT M/M .............................................................................................................4.20CN36......................NPTF x NPTF M/M.............................................................................................................4.20CB37 ......................BSPT x BSPT M/F ..............................................................................................................4.20CN37......................NPTF x NPTF M/F ..............................................................................................................4.20CB38 ......................BSPT x JIC M/M .................................................................................................................4.20CBJ38 ....................BSPT x JIS M/M..................................................................................................................4.21CP38 ......................BSPP x JIC M/M .................................................................................................................4.21CN38......................NPTF x JIC M/M.................................................................................................................4.21CB39 ......................BSPT x BSPT F/F................................................................................................................4.21C40.........................SAE ‘O’ Ring Boss x JIC M/M ...........................................................................................4.21C41.........................SAE ‘O’ Ring Boss x LP Hose Tail ....................................................................................4.21CB41 ......................BSPT x LP Hose Tail...........................................................................................................4.22CN41......................NPTF x LP Hose Tail ..........................................................................................................4.22C42.........................JIC x JIC Bulkhead M/M.....................................................................................................4.22
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.3
Contents
Part No. ................. Description...........................................................................................................................Page
Section 4Adaptors
90° UNIONSC46 ........................JIC x JIC M/F ...................................................................................................................... 4.22CB46......................BSPT x BSPP M/F .............................................................................................................. 4.22CP46 ......................BSPP x BSPP M/F............................................................................................................... 4.22CN46 .....................NPTF x NPSM M/F............................................................................................................. 4.22F46.........................ORFS x ORFS M/F ............................................................................................................. 4.22C47 ........................SAE ‘O’ Ring Boss x JIC M/F ............................................................................................ 4.22CB47......................SAE ‘O’ Ring Boss x BSPP M/F ........................................................................................ 4.23CN47 .....................SAE ‘O’ Ring Boss x NPTF M/F........................................................................................ 4.23CB48......................BSPT x JIC .......................................................................................................................... 4.23ZC52......................SAE ’O’ Ring Boss x SAE ’O’ Ring Boss.......................................................................... 4.23
90° ELBOWSCB53......................BSPT x BSPT M/M............................................................................................................. 4.23CBS53 ...................BSPT x BSPT M/M............................................................................................................. 4.23CPB53 ...................BSPP x BSPT M/M ............................................................................................................. 4.23CPBS53 .................BSPP Swivel x BSPT M/M................................................................................................. 4.23F53.........................ORFS x ORFS M/M............................................................................................................ 4.23CN53 .....................NPTF x NPTF M/M ............................................................................................................ 4.24CP53 ......................BSPP x BSPT M/M ............................................................................................................. 4.24CB54......................BSPT x BSPT M/F .............................................................................................................. 4.24CN54 .....................NPTF x NPTF M/F.............................................................................................................. 4.24CPB54 ...................BSPP x BSPT ...................................................................................................................... 4.24CB55......................BSPT x BSPT F/F ............................................................................................................... 4.24CN55 .....................NPTF x NPTF F/F ............................................................................................................... 4.24CB56......................BSPT x JIC M/M................................................................................................................. 4.24CBJ56 ....................BSPT x JIS .......................................................................................................................... 4.25CP56 ......................BSPP x JIC M/M ................................................................................................................. 4.25CM56.....................DIN x JIC ............................................................................................................................ 4.25CN56 .....................NPTF x JIC M/M................................................................................................................. 4.25FP56.......................BSPP x ORFS M/M............................................................................................................. 4.25CB57......................BSPT x JIC Extended M/M................................................................................................. 4.25CBS57 ...................BSPT Swivel x JIC M/M..................................................................................................... 4.25CP57 ......................BSPP Extended x JIC M/M................................................................................................. 4.26CN57 .....................NPTF x JIC Extended M/M ................................................................................................ 4.26C58 ........................JIC x JIC M/M..................................................................................................................... 4.26CB58......................BSPT x JIC F/M .................................................................................................................. 4.26CN58 .....................NPTF x JIC F/M.................................................................................................................. 4.26C59 ........................SAE ‘O’ Ring Boss x JIC M/M........................................................................................... 4.26F59.........................SAE ‘O’ Ring Boss x ORFS M/M ...................................................................................... 4.27CS59 ......................SAE ‘O’ Ring Boss Swivel x JIC M/M............................................................................... 4.27CE59......................SAE ‘O’ Ring Boss x JIC Extended M/M........................................................................... 4.27CES59....................SAE ‘O’ Ring Boss Swivel x JIC Extended M/M .............................................................. 4.27ZC59......................SAE ’O’ Ring Boss x JIC Orifice Elbow 0.9mm................................................................ 4.27CB59......................SAE ‘O’ Ring Boss x BSPT M/M....................................................................................... 4.27CN59 .....................SAE ‘O’ Ring Boss x NPTF M/M ...................................................................................... 4.27C60 ........................SAE ‘O’ Ring Boss x LP Hose Tail M/M........................................................................... 4.27CB60......................BSPT x LP Hose Tail M/M ................................................................................................. 4.28CP60 ......................BSPP x LP Hose Tail M/M ................................................................................................. 4.28CN60 .....................NPTF x LP Hose Tail M/M................................................................................................. 4.28C61 ........................JIC x JIC BULKHEAD M/M.............................................................................................. 4.28CA61 .....................SAE x SAE BULKHEAD M/M.......................................................................................... 4.28
TEESCB61......................BSPT x BSPT x BSPP M/M/F ............................................................................................ 4.28F61.........................ORFS x ORFS x ORFS M/M/F........................................................................................... 4.28CB62......................BSPT x BSPT x BSPT M/M/M........................................................................................... 4.28CN62 .....................NPTF x NPTF x NPTF M/M/M.......................................................................................... 4.29
4.4 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Section 4Adaptors
Contents
Part No. ................. Description .......................................................................................................................... Page
TEES Cont’dZCP62 ....................BSPP x BSPP x JIC M/M/M ...............................................................................................4.29C63.........................JIC x JIC x JIC M/M/M.......................................................................................................4.29F63 .........................ORFS x ORFS x ORFS M/M/M..........................................................................................4.29CB63 ......................BSPT x BSPT x BSPT F/F/F...............................................................................................4.29CN63......................NPTF x NPTF x NPTF F/F/F ..............................................................................................4.29C64.........................JIC x JIC x JIC F Swivel/M/M ............................................................................................4.29F64 .........................ORFS x ORFS x ORFS F/M/M...........................................................................................4.29CB64 ......................BSPT x BSPT x BSPT M/F/F..............................................................................................4.29CN64......................NPTF x NPTF x NPTF M/F/F.............................................................................................4.30C65.........................JIC x JIC x JIC M/M/F Swivel ............................................................................................4.30CB65 ......................JIC x JIC x BSPT M/M/M...................................................................................................4.30CP65 ......................JIC x JIC x BSPP M/M/M ...................................................................................................4.30CBP65....................BSPP x BSPP x BSPT M/M/M ...........................................................................................4.30CN65......................JIC x JIC x NPTF M/M/M...................................................................................................4.30CBS66....................BSPP x BSPP x BSPT F Swivel/F Swivel/M......................................................................4.30CN66......................NPTF x NPTF x NPTF F/F/M.............................................................................................4.30CB67 ......................JIC x BSPT x JIC M/M/M...................................................................................................4.30CP67 ......................JIC x BSPP x JIC M/M/M ...................................................................................................4.31CN67......................JIC x NPTF x JIC M/M/M...................................................................................................4.31C68.........................JIC x JIC x SAE ‘O’ Ring Boss M/M/M.............................................................................4.31C69.........................SAE ‘O’ Ring Boss x JIC x JIC M/M/M.............................................................................4.31CB69 ......................BSPP x BSPT x BSPT F Swivel/M/M ................................................................................4.31C70.........................JIC x JIC x JIC BULKHEAD M/M/M................................................................................4.31C71.........................JIC x JIC BULKHEAD x JIC M/M/M................................................................................4.31ZCP71 ....................JIC x JIC BULKHEAD x BSPP M/M/M ............................................................................4.31
CROSSC72.........................JIC x JIC x JIC x JIX M/M/M/M ........................................................................................4.32F72 .........................ORFS x ORFS x ORFS x ORFS M/M/M/M.......................................................................4.32CB72 ......................BSPT x BSPT x BSPT x BSPT F/F/F/F ..............................................................................4.32CN72......................NPTF x NPTF x NPTF x NPTF F/F/F/F .............................................................................4.32
REDUCING BUSHESCB73 ......................BSPT x BSPT ......................................................................................................................4.32CR73 ......................BSPP x BSPP Encapsulated Seal.........................................................................................4.32CP73 ......................BSPP x BSPP Style A..........................................................................................................4.32CP73 ......................BSPP x BSPP Style B..........................................................................................................4.32CPB73....................BSPP x BSPT Style A .........................................................................................................4.32CPB73....................BSPP x BSPT Style B..........................................................................................................4.33CN73......................NPTF x NPTF......................................................................................................................4.33C74.........................SAE ‘O’ Ring Boss x SAE ‘O’ Ring Boss ..........................................................................4.33CB74 ......................SAE ‘O’ Ring Boss x BSPT ................................................................................................4.33CN74......................SAE ‘O’ Ring Boss x NPTF Style A...................................................................................4.33CN74......................SAE ‘O’ Ring Boss x NPTF Style B ...................................................................................4.33
PLUGS AND CAP NUTSC77.........................SAE ‘O’ Ring Boss Plug .....................................................................................................4.33C77S ......................SAE ‘O’ Ring Boss Socket Plug .........................................................................................4.34CB77 ......................BSPT Plug............................................................................................................................4.34CR77 ......................BSPP Plug Encapsulated Seal..............................................................................................4.34CP77 ......................BSPP Plug............................................................................................................................4.34CR77S....................BSPP Socket Plug................................................................................................................4.34CN77......................NPTF Plug ...........................................................................................................................4.34CM77 .....................Metric Plug ..........................................................................................................................4.34C78.........................JIC Plug................................................................................................................................4.34F78 .........................ORFS Plug ...........................................................................................................................4.34
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.5
Contents
Part No. ................. Description...........................................................................................................................Page
Section 4Adaptors
PLUGS AND CAP NUTS Cont’dCK78 .....................Metric Komatsu Plug........................................................................................................... 4.34C79 ........................JIC Cap Nut ......................................................................................................................... 4.34CBS79 ...................BSPP Cap Nut ..................................................................................................................... 4.35F79.........................ORFS Cap Nut..................................................................................................................... 4.35CK79 .....................Metric Komatsu Cap Nut..................................................................................................... 4.35
BULKHEAD NUTC80 ........................JIC........................................................................................................................................ 4.35CP80 ......................BSPP.................................................................................................................................... 4.35F80.........................ORFS ................................................................................................................................... 4.35
TUBE NUTS AND SLEEVESC83 ........................JIC........................................................................................................................................ 4.35C83-**N ................JIC Nut................................................................................................................................. 4.35C83-**S.................JIC Sleeve ............................................................................................................................ 4.35F83.........................ORFS ................................................................................................................................... 4.36F83-**N.................ORFS Nut ............................................................................................................................ 4.36F83-**S .................ORFS Sleeve ....................................................................................................................... 4.36
TUBE REDUCERSC84 ........................JIC x JIC F/M Style A ......................................................................................................... 4.36C84-****R ............JIC x JIC F/M Style A Reducer........................................................................................... 4.36C84-****B ............JIC x JIC F/M Style B ......................................................................................................... 4.36F84.........................ORFS x ORFS F/M Style A ................................................................................................ 4.36F84-****R.............ORFS x ORFS F/M Style A Reducer.................................................................................. 4.36
TUBEWELD FITTINGSC86 ........................JIC Male Nipple .................................................................................................................. 4.37F86.........................ORFS Male Nipple .............................................................................................................. 4.37CB86......................BSPT Male Nipple .............................................................................................................. 4.37CN86 .....................NPTF Male Nipple .............................................................................................................. 4.37CP86 ......................BSPP Male........................................................................................................................... 4.37C87 ........................JIC Female Union................................................................................................................ 4.37CB87......................BSPP Female Union ............................................................................................................ 4.38C88 ........................JIC Male 90° Elbow ............................................................................................................ 4.38
S.A.E. FLANGES-TUBEWELDC92 ........................Flange SAE O-Ring Code 61 .............................................................................................. 4.38C92H .....................Flange SAE O-Ring Code 62 .............................................................................................. 4.38
J.I.C. TUBE ASSEMBLIESC93 ........................JIC x JIC Short 90° M/F...................................................................................................... 4.38C93H .....................JIC x JIC Short 90° M/F...................................................................................................... 4.38C94 ........................JIC x JIC Long 90° M/F ...................................................................................................... 4.38C94H .....................JIC x JIC Long 90° M/F ...................................................................................................... 4.39C95 ........................JIC x JIC Tube 45° M/F ...................................................................................................... 4.39
J.I.C. TO S.A.E. FLANGED TUBEWELD ASSEMBLIESC96 ........................JIC Male Flange Head Straight Code 61 ............................................................................. 4.39C96H .....................JIC Male Flange Head Straight Code 62 ............................................................................. 4.39C97 ........................JIC Male Flange Head 90° Code 61 .................................................................................... 4.39C97H .....................JIC Male Flange Head 90° Code 62 .................................................................................... 4.39C98 ........................JIC Male Flange Head 45° Code 61 .................................................................................... 4.40C98H .....................JIC Male Flange Head 45° Code 62 .................................................................................... 4.40FLH6K...................JIC Male Flange Head 6000psi............................................................................................ 4.40FLH6K45...............JIC Male Flange Head 45° 6000 psi .................................................................................... 4.40FLH6K90...............JIC Male Flange Head 90° 6000 psi .................................................................................... 4.40
4.6 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Section 4Adaptors
Contents
Part No. ................. Description .......................................................................................................................... Page
SPLIT CLAMPSFSC ........................Flange Code 61 ....................................................................................................................4.41FSCH .....................Flange Code 62 ....................................................................................................................4.41CATFHS ................Flange CAT-Style ................................................................................................................4.41
SAE FLANGESFL...........................Blank Code 61 .....................................................................................................................4.41FLH........................Blank Code 62 .....................................................................................................................4.41FP...........................Blank Code 61 .....................................................................................................................4.41FPH ........................Blank Code 62 .....................................................................................................................4.41FB ..........................BSPP Code 61......................................................................................................................4.41FN ..........................NPTF Code 61 .....................................................................................................................4.41FBH........................BSPP Code 62......................................................................................................................4.41
O-RINGSR01.........................to suit UN Threads...............................................................................................................4.42R02.........................to suit SAE Flanges..............................................................................................................4.42R03.........................to suit BSPP Threads ...........................................................................................................4.42R05.........................to suit Male Swivel ..............................................................................................................4.42R06.........................to suit ORFS Fittings ...........................................................................................................4.42R19.........................Encapsulated to suit BSPP Threads .....................................................................................4.43
SEALSR04.........................to suit BSPP Threads DIN Std.............................................................................................4.42R04B ......................to suit BSP.P Threads B.S Std .............................................................................................4.42R04M .....................to suit Metric Threads ..........................................................................................................4.42DKR.......................Metal Sealing Rings to DIN Std ..........................................................................................4.43
RETAINING RINGSR13.........................to suit BSPP O-Rings...........................................................................................................4.43
SEAL KITSSORKIT.................O-Ring Assortment (UNO, ORFS, Code61 & Code62)......................................................4.43SORKIT-P .............BSPP O-Ring & Retainer Kit .............................................................................................4.43SORKIT-DM .........Bonded Seal Kit (Metric Seal).............................................................................................4.43SORKIT-DP ..........Bonded Seal Kit (BSPP Seal) ..............................................................................................4.43
SAE FLANGE BOLT KITSBKU-CAP..............UNC Cap Head Bolt Kit ......................................................................................................4.44BKUH-CAP...........UNC Cap Head Bolt Kit Heavy Duty..................................................................................4.44BKU-HEX .............UNC Hex Head Bolt Kit ......................................................................................................4.44BKUH-HEX ..........UNC Hex Head Bolt Kit Heavy Duty .................................................................................4.44BKM-CAP .............Metric Cap Head Bolt Kit ....................................................................................................4.44BKMH-CAP ..........Metric Cap Head Bolt Kit Heavy Duty ...............................................................................4.44BKM-HEX.............Metric Hex Head Bolt Kit....................................................................................................4.44BKMH-HEX..........Metric Hex Head Bolt Kit Heavy Duty ...............................................................................4.44
PLUG PLASTICPPJ .........................JIC/SAE ...............................................................................................................................4.45PPB ........................BSP/NPT..............................................................................................................................4.45PPM .......................Metric...................................................................................................................................4.45
CAPS PLASTICCPJ.........................JIC/SAE ...............................................................................................................................4.45CPB........................BSP/NPT..............................................................................................................................4.45CPM.......................Metric...................................................................................................................................4.45CPF61 ....................Flange Code 61 ....................................................................................................................4.45CPF62 ....................Flange Code 62 ....................................................................................................................4.45
The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 4.7
Contents
Part No. ................. Description...........................................................................................................................Page
Section 4Adaptors
FLARETITE SEALSIP ........................... Individual Seals ................................................................................................................... 4.47BP ..........................Standard Packs..................................................................................................................... 4.47QT..........................Bulk Packs ........................................................................................................................... 4.47
BANJOSBJ1.........................Banjo Metric c/w Back Bore ............................................................................................... 4.48BJ2.........................Banjo BSPP c/w Back Bore ................................................................................................ 4.48BJ3.........................Banjo Metric to JIC-M ........................................................................................................ 4.48BJB ........................Banjo Bolt Metric ................................................................................................................ 4.48BJB ........................Banjo Bolt BSPP ................................................................................................................. 4.48BJW .......................Banjo Washer ...................................................................................................................... 4.48
4.8 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.
Section 4Adaptors
Contents
Part No. ................. Description .......................................................................................................................... Page
THIS PAGE INTENTIONALLY LEFT (MOSTLY) BLANK
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.9
*Manufactured To Order (minimum qtys may apply)
Nipple M/MJIC x JIC
P/Number ................................... ThreadC1-0707............................... 7/16 x 7/16C1-0808................................... 1/2 x 1/2C1-0907............................... 9/16 x 7/16C1-0909............................... 9/16 x 9/16C1-1207................................. 3/4 x 7/16C1-1209................................. 3/4 x 9/16C1-1212................................... 3/4 x 3/4C1-1412................................... 7/8 x 3/4C1-1414................................... 7/8 x 7/8C1-1709............................1-1/16 x 9/16C1-1712..............................1-1/16 x 3/4C1-1714..............................1-1/16 x 7/8C1-1717........................ 1-1/16 x 1-1/16C1-1917........................ 1-3/16 x 1-1/16C1-2114..............................1-5/16 x 7/8C1-2117........................ 1-5/16 x 1-1/16C1-2119........................ 1-5/16 x 1-3/16C1-2121........................ 1-5/16 x 1-5/16C1-2621.......................... 1-5/8 x 1-5/16C1-2626............................ 1-5/8 x 1-5/8C1-3026............................ 1-7/8 x 1-5/8C1-3030............................ 1-7/8 x 1-7/8C1-4040............................ 2-1/2 x 2-1/2
Nipple M/MORFS x ORFS
P/Number ................................... ThreadF1-0909 ............................... 9/16 x 9/16F1-1111 ........................... 11/16 x 11/16F1-1313 ........................... 13/16 x 13/16F1-1616 ......................................... 1 x 1F1-1916 .................................1-3/16 x 1F1-1919 ........................ 1-3/16 x 1-3/16F1-2323 ........................ 1-7/16 x 1-7/16
Nipple M/MBSPT x BSPT
P/Number....................................ThreadCB1-0202 ................................1/8 x 1/8CB1-0402 ................................1/4 x 1/8CB1-0402Z (1.6mm orifice) ...1/4 x 1/8CB1-0404 ................................1/4 x 1/4CB1-0604 ................................3/8 x 1/4CB1-0606 ................................3/8 x 3/8CB1-0804 ................................1/2 x 1/4CB1-0806 ................................1/2 x 3/8CB1-0808 ................................1/2 x 1/2CB1-1008 ................................5/8 x 1/2CB1-1010 ................................5/8 x 5/8CB1-1204 ................................3/4 x 1/4CB1-1206 ................................3/4 x 3/8CB1-1208 ................................3/4 x 1/2CB1-1212 ................................3/4 x 3/4CB1-1606 ...................................1 x 3/8CB1-1608 ...................................1 x 1/2CB1-1612 ...................................1 x 3/4CB1-1616 ...................................... 1 x 1CB1-2012 ............................ 1-1/4 x 3/4CB1-2016 ................................1-1/4 x 1CB1-2020 ......................... 1-1/4 x 1-1/4
* CB1-2412 ............................ 1-1/2 x 3/4CB1-2416 ................................1-1/2 x 1CB1-2420 ......................... 1-1/2 x 1-1/4CB1-2424 ......................... 1-1/2 x 1-1/2
* CB1-3220 ................................2 x 1-1/4CB1-3224 ................................2 x 1-1/2CB1-3232 ...................................... 2 x 2CB1-4040 ......................... 2-1/2 x 2-1/2
Nipple M/MBSPP x BSPP
Encapsulated SealIncluded in the supply.
P/Number....................................ThreadCR1-0202 ................................1/8 x 1/8CR1-0404 ................................1/4 x 1/4CR1-0604 ................................3/8 x 1/4CR1-0606 ................................3/8 x 3/8CR1-0806 ................................1/2 x 3/8CR1-0808 ................................1/2 x 1/2CR1-1208 ................................3/4 x 1/2CR1-1212 ................................3/4 x 3/4CR1-1612 ...................................1 x 3/4CR1-1616 ...................................... 1 x 1CR1-2016 ................................1-1/4 x 1CR1-2020 ......................... 1-1/4 x 1-1/4CR1-2424 ......................... 1-1/2 x 1-1/2
Nipple M/MBSPP x BSPP
Included in the supply is one‘O’ Ring and Retainer Washer.Jump Threads are supplied with
‘O’ Ring & Retainer on largeThread only.
P/Number................................... ThreadCP1-0202 .................................1/8 x 1/8CP1-0404 .................................1/4 x 1/4CP1-0604 .................................3/8 x 1/4CP1-0606 .................................3/8 x 3/8CP1-0806 .................................1/2 x 3/8CP1-0808 .................................1/2 x 1/2CP1-1208 .................................3/4 x 1/2CP1-1212 .................................3/4 x 3/4CP1-1608 ....................................1 x 1/2CP1-1612 ....................................1 x 3/4CP1-1616 .......................................1 x 1CP1-2016 ................................ 1-1/4 x 1CP1-2020 ..........................1-1/4 x 1-1/4CP1-2420 ..........................1-1/2 x 1-1/4CP1-2424 ..........................1-1/2 x 1-1/2CP1-3232 .......................................2 x 2
Nipple M/MBSPP x BSPP
Adjustable
P/Number................................... ThreadCR1-0606Z ..............................3/8 x 3/8CR1-0808Z ..............................1/2 x 1/2
Nipple M/MJIS x JIS
(BSPP x BSPP)
P/Number................................... ThreadCPJ1-0404................................1/4 x 1/4CPJ1-0606................................3/8 x 3/8CPJ1-0808................................1/2 x 1/2CPJ1-1212................................3/4 x 3/4CPJ1-1616......................................1 x 1
4.10 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Nipple M/MBSPP x BSPT
P/Number................................... ThreadCPB1-0204 ..............................1/8 x 1/4CPB1-0404 ..............................1/4 x 1/4CPB1-0406 ..............................1/4 x 3/8CPB1-0604 ..............................3/8 x 1/4CPB1-0606 ..............................3/8 x 3/8CPB1-0608 ..............................3/8 x 1/2CPB1-0804 ..............................1/2 x 1/4CPB1-0806 ..............................1/2 x 3/8CPB1-0808 ..............................1/2 x 1/2CPB1-0812 ..............................1/2 x 3/4CPB1-1208 ..............................3/4 x 1/2CPB1-1212 ..............................3/4 x 3/4CPB1-1216 .................................3/4 x 1CPB1-1608 .................................1 x 1/2CPB1-1612 .................................1 x 3/4CPB1-1616 ....................................1 x 1CPB1-2016 ............................. 1-1/4 x 1CPB1-2020 .......................1-1/4 x 1-1/4CPB1-2420 .......................1-1/2 x 1-1/4CPB1-2424 .......................1-1/2 x 1-1/2CPB1-3220 ............................. 2 x 1-1/4
* CPB1-3224 ............................. 2 x 1-1/2CPB1-3232 ....................................2 x 2
Nipple M/MNPTF x NPTF
P/Number................................... ThreadCN1-0202 ................................1/8 x 1/8CN1-0402 ................................1/4 x 1/8CN1-0404 ................................1/4 x 1/4CN1-0604 ................................3/8 x 1/4CN1-0606 ................................3/8 x 3/8CN1-0806 ................................1/2 x 3/8CN1-0808 ................................1/2 x 1/2CN1-1204 ................................3/4 x 1/4
* CN1-1206 ................................3/4 x 3/8CN1-1208 ................................3/4 x 1/2CN1-1212 ................................3/4 x 3/4CN1-1608 ...................................1 x 1/2CN1-1612 ...................................1 x 3/4CN1-1616 ......................................1 x 1
* CN1-2016 ............................... 1-1/4 x 1CN1-2020 .........................1-1/4 x 1-1/4CN1-2420 .........................1-1/2 x 1-1/4CN1-2424 .........................1-1/2 x 1-1/2CN1-3224 ............................... 2 x 1-1/2CN1-3232 ......................................2 x 2
* CN1-4040 .........................2-1/2 x 2-1/2
Nipple M/MBSPP x BSPT
Encapsulated Seal
P/Number ................................... ThreadCRB1-0604 ............................. 3/8 x 1/4CRB1-0606 ............................. 3/8 x 3/8
* CRB1-0608 ............................. 3/8 x 1/2* CRB1-0806 ............................. 1/2 x 3/8
CRB1-0808 ............................. 1/2 x 1/2CRB1-1212 ............................. 3/4 x 3/4CRB1-1616 ................................... 1 x 1
* CRB1-2016 ............................. 1-1/4 x 1CRB1-2020 .......................1-1/4 x 1-1/4
Nipple M/MBSPP x NPTF
P/Number ................................... ThreadCPN1-0404.............................. 1/4 x 1/4
* CPN1-0604.............................. 3/8 x 1/4CPN1-0606.............................. 3/8 x 3/8CPN1-0608.............................. 3/8 x 1/2
* CPN1-0806.............................. 1/2 x 3/8CPN1-0808.............................. 1/2 x 1/2
* CPN1-0812.............................. 1/2 x 3/4CPN1-1212.............................. 3/4 x 3/4CPN1-1616.................................... 1 x 1
* CPN1-1620.............................. 1 x 1-1/4* CPN1-2020........................1-1/4 x 1-1/4* CPN1-2024........................1-1/4 x 1-1/2
Nipple M/MUNO x UNOAdjustable
P/Number ................................... ThreadCU1-0909............................ 9/16 x 9/16CU1-1212................................ 3/4 x 3/4CU1-1412................................ 7/8 x 3/4CU1-2121......................1-5/16 x 1-5/16
Bulkhead Nipple M/MJIC x JIC
P/Number ...................................ThreadC2-0707 ...............................7/16 x 7/16C2-0707-E56 .......................7/16 x 7/16C2-0808 ...................................1/2 x 1/2C2-0909 ...............................9/16 x 9/16C2-0909-E59 .......................9/16 x 9/16C2-1212 ...................................3/4 x 3/4C2-1212-E66 ...........................3/4 x 3/4C2-1414 ...................................7/8 x 7/8C2-1714 ..............................1-1/16 x 7/8C2-1717 ........................ 1-1/16 x 1-1/16C2-1919 ........................ 1-3/16 x 1-3/16C2-2121 ........................ 1-5/16 x 1-5/16C2-2626 ............................ 1-5/8 x 1-5/8C2-3030 ............................ 1-7/8 x 1-7/8C2-4040 ............................ 2-1/2 x 2-1/2
Bulkhead Nipple M/MUNO x JICExtended
P/Number ...................................Thread* ZC2-1212 ................................3/4 x 3/4
ZC2-1414 ................................7/8 x 7/8* ZC2-1717 ..................... 1-1/16 x 1-1/16* ZC2-2121 ..................... 1-5/16 x 1-5/16
Bulkhead Nipple M/MORFS x ORFS
P/Number ...................................ThreadF2-0909 ...............................9/16 x 9/16F2-1111 ...........................11/16 x 11/16F2-1313 ...........................13/16 x 13/16F2-1616 ......................................... 1 x 1F2-1919 ...................... 1-3/16 x 1-1/316F2-2323 ........................ 1-7/16 x 1-7/16F2-2727 ................... 1-11/16 x 1-11/16
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.11
*Manufactured To Order (minimum qtys may apply)
Bulkhead Nipple M/MSAE x SAE
P/Number ................................... ThreadCA2-1010................................ 5/8 x 5/8CA2-1212................................ 3/4 x 3/4CA2-1414................................ 7/8 x 7/8
* CA2-1717..................... 1-1/16 x 1-1/16
Bulkhead Nipple M/MBSPP x JIC
P/Number ................................... Thread* CR2-0609Z............................ 3/8 x 9/16
CR2-0814Z.............................. 1/2 x 7/8
Nipple M/MBSPT x JIC
P/Number....................................ThreadCB2-0206 ................................1/8 x 3/8CB2-0207 ..............................1/8 x 7/16CB2-0208 ................................1/8 x 1/2CB2-0209 ..............................1/8 x 9/16CB2-0407 ..............................1/4 x 7/16CB2-0408 ................................1/4 x 1/2CB2-0409 ..............................1/4 x 9/16CB2-0412 ................................1/4 x 3/4CB2-0414 ................................1/4 x 7/8CB2-0607 ..............................3/8 x 7/16CB2-0608 ................................3/8 x 1/2CB2-0609 ..............................3/8 x 9/16CB2-0612 ................................3/8 x 3/4CB2-0614 ................................3/8 x 7/8CB2-0617 .......................... 3/8 x 1-1/16CB2-0807 ..............................1/2 x 7/16CB2-0809 ..............................1/2 x 9/16CB2-0812 ................................1/2 x 3/4CB2-0814 ................................1/2 x 7/8CB2-0817 .......................... 1/2 x 1-1/16CB2-0821 .......................... 1/2 x 1-5/16CB2-1208 ................................3/4 x 1/2CB2-1209 ..............................3/4 x 9/16CB2-1212 ................................3/4 x 3/4CB2-1214 ................................3/4 x 7/8CB2-1217 .......................... 3/4 x 1-1/16
* CB2-1219 .......................... 3/4 x 1-3/16CB2-1221 .......................... 3/4 x 1-5/16CB2-1612 ...................................1 x 3/4CB2-1614 ...................................1 x 7/8CB2-1617 ..............................1 x 1-1/16CB2-1621 ..............................1 x 1-5/16CB2-1626 ................................1 x 1-5/8CB2-2017 ....................... 1-1/4 x 1-1/16CB2-2021 ....................... 1-1/4 x 1-5/16CB2-2026 ......................... 1-1/4 x 1-5/8CB2-2030 ......................... 1-1/4 x 1-7/8
* CB2-2040 ......................... 1-1/4 x 2-1/2CB2-2421 ....................... 1-1/2 x 1-5/16CB2-2426 ......................... 1-1/2 x 1-5/8CB2-2430 ......................... 1-1/2 x 1-7/8CB2-3230 ................................2 x 1-7/8CB2-3240 ................................2 x 2-1/2
Nipple M/MBSPT x SAE
P/Number....................................ThreadCBA2-0410 .............................1/4 x 5/8CBA2-0610 .............................3/8 x 5/8CBA2-0810 .............................1/2 x 5/8
Nipple M/MBSPT x JIS
P/Number................................... ThreadCBJ2-0404 ...............................1/4 x 1/4CBJ2-0606 ...............................3/8 x 3/8CBJ2-0808 ...............................1/2 x 1/2CBJ2-1212 ...............................3/4 x 3/4CBJ2-1616 .....................................1 x 1
Nipple M/MBSPP x JIC
Encapsulated SealIncluded in the supply
P/Number................................... ThreadCR2-0207...............................1/8 x 7/16CR2-0209...............................1/8 x 9/16CR2-0407...............................1/4 x 7/16CR2-0408.................................1/4 x 1/2CR2-0409...............................1/4 x 9/16CR2-0412.................................1/4 x 3/4CR2-0607...............................3/8 x 7/16CR2-0609...............................3/8 x 9/16CR2-0612.................................3/8 x 3/4CR2-0614.................................3/8 x 7/8CR2-0809...............................1/2 x 9/16CR2-0812.................................1/2 x 3/4CR2-0814.................................1/2 x 7/8CR2-0817........................... 1/2 x 1-1/16CR2-1209...............................3/4 x 9/16CR2-1212.................................3/4 x 3/4CR2-1214.................................3/4 x 7/8CR2-1217........................... 3/4 x 1-1/16CR2-1221........................... 3/4 x 1-5/16CR2-1612....................................1 x 3/4CR2-1614....................................1 x 7/8CR2-1617.............................. 1 x 1-1/16CR2-1621.............................. 1 x 1-5/16CR2-1626................................ 1 x 1-5/8CR2-2017........................1-1/4 x 1-1/16CR2-2021........................1-1/4 x 1-5/16CR2-2026..........................1-1/4 x 1-5/8CR2-2030..........................1-1/4 x 1-7/8CR2-2421........................1-1/2 x 1-5/16CR2-2426..........................1-1/2 x 1-5/8CR2-2430..........................1-1/2 x 1-7/8
4.12 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Nipple M/MBSPP x JIC
P/Number................................... ThreadCP2-0207 ...............................1/8 x 7/16CP2-0209 ...............................1/8 x 9/16CP2-0407 ...............................1/4 x 7/16CP2-0408 .................................1/4 x 1/2CP2-0409 ...............................1/4 x 9/16CP2-0412 .................................1/4 x 3/4CP2-0607 ...............................3/8 x 7/16CP2-0609 ...............................3/8 x 9/16CP2-0612 .................................3/8 x 3/4CP2-0614 .................................3/8 x 7/8CP2-0807 ...............................1/2 x 7/16CP2-0809 ...............................1/2 x 9/16CP2-0812 .................................1/2 x 3/4CP2-0814 .................................1/2 x 7/8CP2-0817 ........................... 1/2 x 1-1/16CP2-1209 ...............................3/4 x 9/16CP2-1212 .................................3/4 x 3/4CP2-1214 .................................3/4 x 7/8CP2-1217 ........................... 3/4 x 1-1/16CP2-1221 ........................... 3/4 x 1-5/16CP2-1612 ....................................1 x 3/4CP2-1614 ....................................1 x 7/8CP2-1617 .............................. 1 x 1-1/16CP2-1621 .............................. 1 x 1-5/16CP2-1626 ................................ 1 x 1-5/8
* CP2-2012 ............................. 1-1/4 x 3/4CP2-2017 ........................1-1/4 x 1-1/16CP2-2021 ........................1-1/4 x 1-5/16CP2-2026 ..........................1-1/4 x 1-5/8CP2-2030 ..........................1-1/4 x 1-7/8CP2-2040 ..........................1-1/4 x 2-1/2CP2-2421 ........................1-1/2 x 1-5/16CP2-2426 ..........................1-1/2 x 1-5/8CP2-2430 ..........................1-1/2 x 1-7/8CP2-3226 ................................ 2 x 1-5/8CP2-3230 ................................ 2 x 1-7/8CP2-3240 ................................ 2 x 2-1/2
Nipple M/MBSPP x JIC
1.5mm Orifice
P/Number................................... ThreadZCP2-0609 1.5MM................3/8 x 9/16
Nipple M/MBSPP x JIC
Extended
P/Number ................................... Thread* CP2-E90-0409....................... 1/4 x 9/16* CP2-E95-0409....................... 1/4 x 9/16* CP2-E160-0609..................... 3/8 x 9/16* CP2-E90-0609....................... 3/8 x 9/16* CP2-E70-0612......................... 3/8 x 3/4* CP2-E95-0612......................... 3/8 x 3/4
Nipple M/MMetric Port Adaptor
DIN x JIC
P/Number ................................... ThreadCM2-0807 ......................M8x1.0 x 7/16CM2-0809 ......................M8x1.0 x 9/16CM2-1007 ....................M10x1.0 x 7/16CM2-1207 ....................M12x1.5 x 7/16CM2-1209 ....................M12x1.5 x 9/16CM2-1212 ......................M12x1.5 x 3/4CM2-1409 ....................M14x1.5 x 9/16CM2-1412 ......................M14x1.5 x 3/4CM2-1609 ....................M16x1.5 x 9/16CM2-1612 ......................M16x1.5 x 3/4CM2-1614 ......................M16x1.5 x 7/8CM2-1809 ....................M18x1.5 x 9/16CM2-1812 ......................M18x1.5 x 3/4CM2-1814 ......................M18x1.5 x 7/8CM2-1817 ................ M18x1.5 x 1-1/16ZCM2-2009..................M20x1.5 x 9/16CM2-2012 .........................M20x1.5 x 1CM2-2014 ......................M20x1.5 x 7/8CM2-2017 ................ M20x1.5 x 1-1/16CM2-2207 ....................M22x1.5 x 7/16CM2-2209 ....................M22x1.5 x 9/16CM2-2212 ......................M22x1.5 x 3/4CM2-2214 ......................M22x1.5 x 7/8CM2-2217 ................ M22x1.5 x 1-1/16CM2-2614 ......................M26x1.5 x 7/8CM2-2617 ................ M26x1.5 x 1-1/16CM2-2621 ................ M26x1.5 x 1-5/16CM2-2717 ................ M27x2.0 x 1-1/16CM2-2817 ................ M28x2.0 x 1-1/16CM2-2821 ................ M28x2.0 x 1-5/16CM2-3312 ......................M33x2.0 x 3/4CM2-3317 ................ M33x2.0 x 1-1/16CM2-3321 ................ M33x2.0 x 1-5/16CM2-3326 .................. M33x2.0 x 1-5/8CM2-4221 ................ M42x2.0 x 1-5/16CM2-4226 .................. M42x2.0 x 1-5/8CM2-4230 .................. M42x2.0 x 1-7/8CM2-4826 .................. M48x2.0 x 1-5/8CM2-4830 .................. M48x2.0 x 1-7/8
Nipple M/MMetric Tube Adaptor
Light SeriesDKL x JIC
P/Number ...... Tube OD.............Thread* CM2L-1207....... 6L .... M12x1.5 x 7/16* CM2L-1209....... 6L .... M12x1.5 x 9/16
CM2L-1409....... 8L .... M14x1.5 x 9/16* CM2L-1412....... 8L ...... M14x1.5 x 3/4
CM2L-1809..... 12L .... M18x1.5 x 9/16* CM2L-1812..... 12L ...... M18x1.5 x 3/4
CM2L-2212..... 15L ...... M22x1.5 x 3/4* CM2L-2214..... 15L ...... M22x1.5 x 7/8
Nipple M/MMetric Tube Adaptor
Strong SeriesDKS x JIC
P/Number ......Tube OD .............Thread* CM2S-1809 .... 10S ..... M18x1.5 x 9/16* CM2S-2412 .... 16S ....... M24x1.5 x 3/4* CM2S-2417 .... 16S .. M24x1.5 x 1-1/16* CM2S-3014 .... 20S ....... M30x2.0 x 7/8* CM2S-3617 .... 25S .. M36x2.0 x 1-1/16* CM2S-4221 .... 30S .. M42x2.0 x 1-5/16
Nipple M/MMetric Tube Adaptor
Light SeriesDKL x BSPP
P/Number ........Tube OD ...........Thread* CMP2L-1404...... 8L ..... M14x1.5 x 1/4* CMP2L-1606.... 10L ..... M16x1.5 x 3/8* CMP2L-1808.... 12L ..... M18x1.5 x 1/2* CMP2L-2212.... 15L ..... M22x1.5 x 3/4
CMP2L-3012.... 22L ..... M30x2.0 x 3/4CMP2L-3616.... 28L .........M36x2.0 x 1
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.13
*Manufactured To Order (minimum qtys may apply)
Nipple M/MMetric Tube Adaptor
Strong SeriesDKS x BSPP
P/Number ...... Tube OD............. Thread* CMP2S-1604.......8S ......M16x1.5 x 1/4* CMP2S-1804.....10S ......M18x1.5 x 1/4* CMP2S-1806.....10S ......M18x1.5 x 3/8* CMP2S-2006.....12S ......M20x1.5 x 3/8* CMP2S-2208.....14S ......M22x1.5 x 1/2* CMP2S-2406.....16S ......M24x1.5 x 3/8* CMP2S-2408.....16S ......M24x1.5 x 1/2* CMP2S-3012.....20S ......M30x2.0 x 3/4* CMP2S-3612.....25S ......M36x2.0 x 3/4* CMP2S-4220.....30S .. M42x2.0 x 1-1/4* CMP2S-5224.....38S .. M52x2.0 x 1-1/2
Nipple M/MNPTF x JIC
P/Number....................................ThreadCN2-0207 ..............................1/8 x 7/16CN2-0208 ................................1/8 x 1/2CN2-0209 ..............................1/8 x 9/16CN2-0407 ..............................1/4 x 7/16CN2-0408 ................................1/4 x 1/2CN2-0409 ..............................1/4 x 9/16CN2-0412 ................................1/4 x 3/4CN2-0607 ..............................3/8 x 7/16
* CN2-0608 ................................3/8 x 1/2CN2-0609 ..............................3/8 x 9/16CN2-0612 ................................3/8 x 3/4CN2-0614 ................................3/8 x 7/8CN2-0617 .......................... 3/8 x 1-1/16CN2-0807 ..............................1/2 x 7/16CN2-0809 ..............................1/2 x 9/16CN2-0812 ................................1/2 x 3/4CN2-0814 ................................1/2 x 7/8CN2-0817 .......................... 1/2 x 1-1/16CN2-1207 ..............................3/4 x 7/16CN2-1209 ..............................3/4 x 9/16CN2-1212 ................................3/4 x 3/4CN2-1214 ................................3/4 x 7/8CN2-1217 .......................... 3/4 x 1-1/16
* CN2-1219 .......................... 3/4 x 1-3/16CN2-1221 .......................... 3/4 x 1-5/16
* CN2-1226 ............................ 3/4 x 1-5/8CN2-1614 ...................................1 x 7/8CN2-1617 ..............................1 x 1-1/16CN2-1621 ..............................1 x 1-5/16CN2-1626 ................................1 x 1-5/8CN2-2017 ....................... 1-1/4 x 1-1/16CN2-2021 ....................... 1-1/4 x 1-5/16
* CN2-2026 ......................... 1-1/4 x 1-5/8CN2-2030 ......................... 1-1/4 x 1-7/8CN2-2426 ......................... 1-1/2 x 1-5/8
* CN2-2430 ......................... 1-1/2 x 1-7/8CN2-3230 ................................2 x 1-7/8CN2-3240 ................................2 x 2-1/2
Nipple M/M BSPP x ORFS
P/Number....................................ThreadFP2-0409 ...............................1/4 x 9/16FP2-0611 .............................3/8 x 11/16FP2-0811 .............................1/2 x 11/16FP2-0813 .............................1/2 x 13/16FP2-0816 ....................................1/2 x 1FP2-0819 ........................... 1/2 x 1-3/16FP2-1216 ....................................3/4 x 1FP2-1219 ........................... 3/4 x 1-3/16FP2-1623 ...............................1 x 1-7/16
Nipple M/MS.A.E. ‘O’ Ring Boss
x JIC
P/Number................................... ThreadC3-0609 .................................3/8 x 9/16C3-0707 ...............................7/16 x 7/16C3-0709 ...............................7/16 x 9/16C3-0712 .................................7/16 x 3/4C3-0807 .................................1/2 x 7/16C3-0808 ...................................1/2 x 1/2C3-0809 .................................1/2 x 9/16C3-0907 ...............................9/16 x 7/16
* C3-0908 .................................9/16 x 1/2C3-0909 ...............................9/16 x 9/16C3-0912 .................................9/16 x 3/4C3-0914 .................................9/16 x 7/8C3-1207 .................................3/4 x 7/16C3-1208 ...................................3/4 x 1/2C3-1209 .................................3/4 x 9/16C3-1212 ...................................3/4 x 3/4C3-1214 ...................................3/4 x 7/8C3-1217 ............................. 3/4 x 1-1/16C3-1221 ............................. 3/4 x 1-5/16C3-1409 .................................7/8 x 9/16C3-1412 ...................................7/8 x 3/4C3-1414 ...................................7/8 x 7/8C3-1417 ............................. 7/8 x 1-1/16C3-1421 ............................. 7/8 x 1-5/16C3-1707 ........................... 1-1/16 x 7/16C3-1709 ........................... 1-1/16 x 9/16C3-1712 ............................. 1-1/16 x 3/4C3-1714 ............................. 1-1/16 x 7/8C3-1717 ........................1-1/16 x 1-1/16C3-1721 ........................1-1/16 x 1-5/16C3-1917 ........................1-3/16 x 1-1/16C3-1919 ........................1-3/16 x 1-3/16C3-2112 ............................. 1-5/16 x 3/4C3-2114 ............................. 1-5/16 x 7/8C3-2117 ........................1-5/16 x 1-1/16C3-2119 ........................1-5/16 x 1-3/16C3-2121 ........................1-5/16 x 1-5/16C3-2126 ..........................1-5/16 x 1-5/8C3-2617 ..........................1-5/8 x 1-1/16C3-2621 ..........................1-5/8 x 1-5/16C3-2626 ............................1-5/8 x 1-5/8C3-2630 ............................1-5/8 x 1-7/8C3-3021 ..........................1-7/8 x 1-5/16C3-3026 ............................1-7/8 x 1-5/8C3-3030 ............................1-7/8 x 1-7/8
* C3-3040 ............................1-7/8 x 2-1/2* C3-4030 ............................2-1/2 x 1-7/8* C3-4040 ............................2-1/2 x 2-1/2
4.14 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Nipple M/MS.A.E. ‘O’ Ring Boss
x ORFS
P/Number................................... ThreadF3-0709................................7/16 x 9/16F3-0711..............................7/16 x 11/16F3-0909................................9/16 x 9/16F3-0911..............................9/16 x 11/16
* F3-1211................................3/4 x 11/16F3-1213................................3/4 x 13/16F3-1416.......................................7/8 x 1F3-1719.........................1-1/16 x 1-3/16F3-1723........................ 1-1/16 x 1-7/16F3-2123.........................1-5/16 x 1-7/16
Nipple M/MS.A.E. ‘O’ Ring Boss
x BSPT
P/Number................................... ThreadCB3-0904...............................9/16 x 1/4CB3-0906...............................9/16 x 3/8CB3-0908...............................9/16 x 1/2CB3-1204.................................3/4 x 1/4CB3-1206.................................3/4 x 3/8CB3-1208.................................3/4 x 1/2CB3-1212.................................3/4 x 3/4CB3-1404.................................7/8 x 1/4CB3-1406.................................7/8 x 3/8CB3-1408.................................7/8 x 1/2CB3-1412.................................7/8 x 3/4CB3-1708........................... 1-1/16 x 1/2CB3-1712........................... 1-1/16 x 3/4CB3-1716.............................. 1-1/16 x 1CB3-1912........................... 1-3/16 x 3/4CB3-2108........................... 1-5/16 x 1/2CB3-2112........................... 1-5/16 x 3/4CB3-2116.............................. 1-5/16 x 1CB3-2120........................1-5/16 x 1-1/4CB3-2616................................ 1-5/8 x 1CB3-2620..........................1-5/8 x 1-1/4CB3-2624..........................1-5/8 x 1-1/2CB3-3024..........................1-7/8 x 1-1/2
Nipple M/MS.A.E. ‘O’ Ring Boss
x NPTF
P/Number ................................... ThreadCN3-0904.............................. 9/16 x 1/4CN3-0906.............................. 9/16 x 3/8
* CN3-1204................................ 3/4 x 1/4CN3-1206................................ 3/4 x 3/8
* CN3-1208................................ 3/4 x 1/2CN3-1404................................ 7/8 x 1/4CN3-1406................................ 7/8 x 3/8
* CN3-1408................................ 7/8 x 1/2* CN3-1412................................ 7/8 x 3/4
CN3-1708...........................1-1/16 x 1/2* CN3-1712...........................1-1/16 x 3/4
CN3-1716.............................. 1-1/16 x 1CN3-2112...........................1-5/16 x 3/4
* CN3-2116.............................. 1-5/16 x 1CN3-2120........................1-5/16 x 1-1/4
* CN3-2616................................ 1-5/8 x 1* CN3-2620..........................1-5/8 x 1-1/4
CN3-2624..........................1-5/8 x 1-1/2* CN3-3024..........................1-7/8 x 1-1/2
Extended Nipple M/MS.A.E. ‘O’ Ring Boss
x JIC
P/Number ................................... Thread* C4-0707............................... 7/16 x 7/16
C4-0808................................... 1/2 x 1/2C4-0907............................... 9/16 x 7/16C4-0909............................... 9/16 x 9/16C4-1212................................... 3/4 x 3/4C4-1412................................... 7/8 x 3/4C4-1414................................... 7/8 x 7/8C4-1417..............................7/8 x 1-1/16
* C4-1714..............................1-1/16 x 7/8C4-1717.........................1-1/16 x 1-1/16
* C4-2117.........................1-5/16 x 1-1/16C4-2121.........................1-5/16 x 1-5/16
* C4-2626.............................1-5/8 x 1-5/8
Clamp-on Hosetail M/MBSPT x Tail
P/Number ............... Thread...........HoseCB4-0404 ............... 1/4.................... 1/4CB4-0406 ............... 1/4.................... 3/8CB4-0408 ............... 1/4.................... 1/2CB4-0604 ............... 3/8.................... 1/4CB4-0606 ............... 3/8.................... 3/8CB4-0608 ............... 3/8.................... 1/2CB4-0610 ............... 3/8.................... 5/8CB4-0806 ............... 1/2.................... 3/8CB4-0808 ............... 1/2.................... 1/2CB4-0810 ............... 1/2................... 5/8CB4-0812 ............... 1/2.................... 3/4CB4-0816 ............... 1/2....................... 1CB4-1212 ............... 3/4.................... 3/4CB4-1216 ............... 3/4....................... 1CB4-1220 ............... 3/4.................1-1/4CB4-1612 ............... 1 ....................... 3/4CB4-1616 ............... 1 .......................... 1CB4-1620 ............... 1 ....................1-1/4CB4-1624 ............... 1 ....................1-1/2CB4-2016 ............... 1-1/4 ................... 1CB4-2020 ............... 1-1/4 .............1-1/4CB4-2024 ............... 1-1/4 .............1-1/2CB4-2420 ............... 1-1/2 .............1-1/4CB4-2424 ............... 1-1/2 .............1-1/2CB4-2432 ............... 1-1/2 ................... 2
* CB4-2440 ............... 1-1/2 .............2-1/2CB4-3232 ............... 2 .......................... 2
* CB4-3240 ............... 2 ....................2-1/2* CB4-4040 ............... 2-1/2 .............2-1/2
Clamp-on Hosetail M/MMetric x Tail
P/Number ............... Thread...........HoseCM4-3316 .............. M33 .................... 1CM4-3324 .............. M33 ..............1-1/2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.15
*Manufactured To Order (minimum qtys may apply)
Clamp-on Hosetail M/MNPTF x Tail
P/Number ............... Thread .......... Hose* CN4-0404............... 1/4.................... 1/4
CN4-0406............... 1/4.................... 3/8CN4-0606............... 3/8.................... 3/8CN4-0608............... 3/8.................... 1/2CN4-0610............... 3/8.................... 5/8
* CN4-0808............... 1/2.................... 1/2* CN4-0810............... 1/2................... 5/8
CN4-1212............... 3/4.................... 3/4CN4-1216............... 3/4....................... 1CN4-1616............... 1.......................... 1CN4-1620............... 1....................1-1/4CN4-1624............... 1....................1-1/2CN4-1626............... 1....................1-5/8CN4-2020............... 1-1/4 .............1-1/4CN4-2024............... 1-1/4 .............1-1/2CN4-2416............... 1-1/2 ................... 1CN4-2420............... 1-1/2 .............1-1/4CN4-2424............... 1-1/2 .............1-1/2CN4-2432............... 1-1/2 ................... 2CN4-3232............... 2......................... 2
Clamp-on Hosetail M/MBSPP x Tail
P/Number ............... Thread .......... HoseCP4-0612 ............... 3/8.................... 3/4CP4-0812 ............... 1/2.................... 3/4CP4-0816 ............... 1/2....................... 1CP4-0820 ............... 1/2.................1-1/4CP4-1212 ............... 3/4.................... 3/4CP4-1216 ............... 3/4....................... 1CP4-1220 ............... 3/4.................1-1/4CP4-1224 ............... 3/4.................1-1/2CP4-1616 ............... 1.......................... 1CP4-1620 ............... 1....................1-1/4CP4-1624 ............... 1....................1-1/2CP4-2016 ............... 1-1/4 ................... 1CP4-2020 ............... 1-1/4 .............1-1/4CP4-2024 ............... 1-1/4 .............1-1/2
* CP4-2032 ............... 1-1/4 ................... 2CP4-2424 ............... 1-1/2 .............1-1/2CP4-2432 ............... 1-1/2 ................... 2CP4-3232 ............... 2.......................... 2
Clamp-on Hosetail M/MS.A.E. ‘O’ Ring Boss x Tail
P/Number................Thread...........HoseC5-1208 .................. 3/4 ....................1/2C5-1212 .................. 3/4 ................... 3/4C5-1408 .................. 7/8 ....................1/2C5-1412 .................. 7/8 ................... 3/4C5-1420 .................. 7/8 .................1-1/4
* C5-1712 .................. 1-1/16...............3/4C5-1716 .................. 1-1/16.................. 1C5-1720 .................. 1-1/16............1-1/4
* C5-2112 .................. 1-5/16.............. 3/4C5-2116 .................. 1-5/16.................. 1C5-2120 .................. 1-5/16............1-1/4C5-2124 .................. 1-5/16............1-1/2C5-2620 .................. 1-5/8..............1-1/4C5-2624 .................. 1-5/8..............1-1/2C5-3024 .................. 1-7/8..............1-1/2
* C5-3032 .................. 1-7/8.................... 2
Clamp-on Hosetail F/MBSPT x Tail
P/Number................Thread...........HoseCB5-1212 ............... 3/4 ....................3/4CB5-1616 ............... 1 .......................... 1CB5-2020 ............... 1-1/4..............1-1/4
Bulkhead Nipple M/MBSPP x BSPP
P/Number....................................ThreadCP6-0404.................................1/4 x 1/4CP6-0606.................................3/8 x 3/8CP6-0808.................................1/2 x 1/2CP6-1212.................................3/4 x 3/4CP6-1616....................................... 1 x 1CP6-2020.......................... 1-1/4 x 1-1/4
Bulkhead Nipple M/MBSPP x BSPP
Encapsulated Seal
P/number.................................... Thread* CR6-0404.................................1/4 x 1/4
CR6-0606.................................3/8 x 3/8CR6-0808.................................1/2 x 1/2CR6-1212.................................3/4 x 3/4CR6-1616.......................................1 x 1
Nipple M/MORFS x JIC
P/Number................................... ThreadF7-0709................................7/16 x 9/16
* F7-0907................................9/16 x 7/16F7-1109..............................11/16 x 9/16F7-1312................................13/16 x 3/4F7-1314................................13/16 x 7/8F7-1614.......................................1 x 7/8F7-1917.........................1-3/16 x 1-1/16F7-2321.........................1-7/16 x 1-5/16
4.16 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Socket F/FS.A.E. ‘O’ Ring
P/Number................................... ThreadC9-0707 ...............................7/16 x 7/16C9-0909 ...............................9/16 x 9/16C9-1212 ...................................3/4 x 3/4C9-1414 ...................................7/8 x 7/8C9-1717 ........................1-1/16 x 1-1/16C9-2121 ........................1-5/16 x 1-5/16
* C9-2626 ............................1-5/8 x 1-5/8
Socket F/FBSPT
P/Number................................... ThreadCB9-0202.................................1/8 x 1/8CB9-0402.................................1/4 x 1/8CB9-0404.................................1/4 x 1/4CB9-0602.................................3/8 x 1/8CB9-0604.................................3/8 x 1/4CB9-0606.................................3/8 x 3/8CB9-0804.................................1/2 x 1/4CB9-0806.................................1/2 x 3/8CB9-0808.................................1/2 x 1/2CB9-1208.................................3/4 x 1/2CB9-1212.................................3/4 x 3/4CB9-1612....................................1 x 3/4CB9-1616.......................................1 x 1CB9-2020..........................1-1/4 x 1-1/4CB9-2424..........................1-1/2 x 1-1/2CB9-3232.......................................2 x 2CB9-4040..........................2-1/2 x 2-1/23 x 3
Socket F/FNPTF
P/Number................................... ThreadCN9-0202 ................................1/8 x 1/8CN9-0404 ................................1/4 x 1/4CN9-0606 ................................3/8 x 3/8CN9-0808 ................................1/2 x 1/2CN9-1212 ................................3/4 x 3/4CN9-1616 ......................................1 x 1CN9-2020 .........................1-1/4 x 1-1/4CN9-2424 .........................1-1/2 x 1-1/2CN9-3232 ......................................2 x 2
* CN9-4040 .........................2-1/2 x 2-1/2CN9-4848 ......................................3 x 3
Socket F/FBSPP
P/Number .....................Thread1/8 x 1/8CP9-0404 ................................ 1/4 x 1/4CP9-0606 ................................ 3/8 x 3/8CP9-0808 ................................ 1/2 x 1/2CP9-1212 ................................ 3/4 x 3/4CP9-1616 ...................................... 1 x 1CP9-2020 ..........................1-1/4 x 1-1/4CP9-2424 ..........................1-1/2 x 1-1/2CP9-3232 ...................................... 2 x 23 x 3
Half Socket FS.A.E. ‘O’ Ring
P/Number ................................... ThreadC14-07............................................ 7/16C14-08.............................................. 1/2C14-09............................................ 9/16C14-12.............................................. 3/4C14-14.............................................. 7/8C14-17......................................... 1-1/16C14-21......................................... 1-5/16C14-26........................................... 1-5/81-7/8
Half Socket FBSPT
P/Number ................................... ThreadCB14-02 ........................................... 1/8CB14-04 ........................................... 1/4CB14-06 ........................................... 3/8CB14-08 ........................................... 1/2CB14-12 ........................................... 3/4CB14-16 .............................................. 1CB14-20 ........................................ 1-1/4CB14-24 ........................................ 1-1/2CB14-32 .............................................. 2
Half Socket FBSPP
P/Number ................................... Thread* CP14-06 ........................................... 3/8
CP14-08 ........................................... 1/2CP14-12 ........................................... 3/4CP14-16 .............................................. 1
* CP14-20 ........................................ 1-1/4
Half Socket FNPTF
P/Number ...................................ThreadCN14-02 ........................................... 1/8CN14-04 ........................................... 1/4CN14-06 ........................................... 3/8CN14-08 ........................................... 1/2CN14-12 ........................................... 3/4CN14-16 .............................................. 1
* CN14-20 ........................................1-1/4* CN14-24 ........................................1-1/2
CN14-32 .............................................. 2
Adaptor Fixed M/FBSPT x BSPT
P/Number ...................................ThreadCB18-0202 ..............................1/8 x 1/8CB18-0204 ..............................1/8 x 1/4CB18-0404 ..............................1/4 x 1/4CB18-0406 ..............................1/4 x 3/8CB18-0606 ..............................3/8 x 3/8CB18-0608 ..............................3/8 x 1/2CB18-0808 ..............................1/2 x 1/2CB18-0812 ..............................1/2 x 3/4CB18-1212 ..............................3/4 x 3/4CB18-1616 .................................... 1 x 1
Adaptor Fixed M/FBSPP x NPTF
P/Number ...................................ThreadCPN18-2016............................1-1/4 x 1CPN18-2024..................... 1-1/4 x 1-1/2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.17
*Manufactured To Order (minimum qtys may apply)
Adaptor Fixed M/FNPTF x NPTF
P/Number ................................... ThreadCN18-0202.............................. 1/8 x 1/8CN18-0204.............................. 1/8 x 1/4CN18-0404.............................. 1/4 x 1/4CN18-0406.............................. 1/4 x 3/8CN18-0606.............................. 3/8 x 3/8CN18-0608.............................. 3/8 x 1/2CN18-0808.............................. 1/2 x 1/2CN18-0812.............................. 1/2 x 3/4CN18-1212.............................. 3/4 x 3/4
* CN18-1616.................................... 1 x 1* CN18-2020....................... 1-1/4 x 1-1/4* CN18-2424....................... 1-1/2 x 1-1/2
Adaptor Fixed F/MBSPT x JIC
P/Number ................................... ThreadCB20-0207 ............................ 1/8 x 7/16CB20-0209 ............................ 1/8 x 9/16CB20-0407 ............................ 1/4 x 7/16CB20-0408 .............................. 1/4 x 1/2CB20-0409 ............................ 1/4 x 9/16CB20-0609 ............................ 3/8 x 9/16CB20-0612 .............................. 3/8 x 3/4CB20-0809 ............................ 1/2 x 9/16CB20-0812 .............................. 1/2 x 3/4CB20-0814 .............................. 1/2 x 7/8CB20-0817 .........................1/2 x 1-1/16CB20-1217 .........................3/4 x 1-1/16CB20-1621 ............................1 x 1-5/16
Gauge Adaptor Fixed F/MBSPP x JIC
P/Number ................................... ThreadCP20-0407G.......................... 1/4 x 7/16CP20-0409G.......................... 1/4 x 9/16CP20-0809G.......................... 1/2 x 9/16
Adaptor Fixed F/MNPTF x JIC
P/Number....................................ThreadCN20-0207 ............................1/8 x 7/16CN20-0208 ..............................1/8 x 1/2CN20-0209 ............................1/8 x 9/16CN20-0407 ............................1/4 x 7/16CN20-0408 ..............................1/4 x 1/2CN20-0409 ............................1/4 x 9/16CN20-0609 ............................3/8 x 9/16CN20-0612 ..............................3/8 x 3/4CN20-0812 ..............................1/2 x 3/4CN20-0814 ..............................1/2 x 7/8CN20-1217 ........................ 3/4 x 1-1/16CN20-1621 ............................1 x 1-5/16
* CN20-2026 ....................... 1-1/4 x 1-5/8* CN20-2430 ....................... 1-1/2 x 1-7/8
CN20-3240 ..............................2 x 2-1/2
Adaptor Fixed M/FS.A.E. ‘O’ Ring Boss
x BSPT
P/Number....................................ThreadCB21-0704 ............................7/16 x 1/4CB21-0904 ............................9/16 x 1/4CB21-0906 ............................9/16 x 3/8CB21-1206 ..............................3/4 x 3/8CB21-1208 ..............................3/4 x 1/2CB21-1406 ..............................7/8 x 3/8CB21-1408 ..............................7/8 x 1/2CB21-1708 ........................ 1-1/16 x 1/2CB21-1712 ........................ 1-1/16 x 3/4
Adaptor Fixed M/FS.A.E. ‘O’ Ring Boss
x NPTF
P/Number................................... Thread* CN21-0704 ............................7/16 x 1/4* CN21-0904 ............................9/16 x 1/4* CN21-0906 ............................9/16 x 3/8* CN21-1206 ..............................3/4 x 3/8* CN21-1208 ..............................3/4 x 1/2
CN21-1408 ..............................7/8 x 1/2* CN21-1708 ........................ 1-1/16 x 1/2* CN21-1712 ........................ 1-1/16 x 3/4* CN21-1716 ........................... 1-1/16 x 1
CN21-2112 ........................ 1-5/16 x 3/4* CN21-2116 ........................... 1-5/16 x 1* CN21-2616 ............................. 1-5/8 x 1* CN21-2620 .......................1-5/8 x 1-1/4
Adaptor Fixed F/M JIC x JIC
P/Number................................... Thread* C22-0707 .............................7/16 x 7/16* C22-0909 .............................9/16 x 9/16* C22-1212 .................................3/4 x 3/4* C22-1414 .................................7/8 x 7/8
C22-1717 ......................1-1/16 x 1-1/16* C22-2121 ......................1-5/16 x 1-5/16
C22-0707Z (0.6mm orifice).7/16x7/16C22-0909Z (0.9mm orifice).9/16x9/16C22-1212Z (0.9mm orifice).....3/4x3/4C22-1414Z (1.2mm orifice).....7/8x7/8
Adaptor Fixed F/MS.A.E. ‘O’ Ring Boss
x BSPT
P/Number................................... ThreadCB22-0906.............................9/16 x 3/8CB22-1206...............................3/4 x 3/8CB22-1208...............................3/4 x 1/2CB22-1406...............................7/8 x 3/8CB22-1408...............................7/8 x 1/2CB22-1712......................... 1-1/16 x 3/4CB22-2116............................ 1-5/16 x 1
4.18 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Adaptor F/MS.A.E. ‘O’ Ring Boss
x NPTF
P/Number................................... ThreadCN22-1712 ........................ 1-1/16 x 3/4
Straight Union M/FBSPT x BSPP
P/Number................................... ThreadCB24-0202...............................1/8 x 1/8CB24-0404...............................1/4 x 1/4CB24-0606...............................3/8 x 3/8CB24-0608...............................3/8 x 1/2CB24-0806...............................1/2 x 3/8CB24-0808...............................1/2 x 1/2CB24-1212...............................3/4 x 3/4CB24-1216..................................3/4 x 1CB24-1616.....................................1 x 1CB24-1620.............................. 1 x 1-1/4CB24-1624.............................. 1 x 1-1/2CB24-2020........................1-1/4 x 1-1/4CB24-2424........................1-1/2 x 1-1/2
Straight Union M/FBSPP x BSPP
Encapsulated Seal
P/Number................................... ThreadCR24-0404...............................1/4 x 1/4CR24-0606...............................3/8 x 3/8CR24-0608...............................3/8 x 1/2CR24-0808...............................1/2 x 1/2CR24-1212...............................3/4 x 3/4CR24-1616.....................................1 x 1CR24-2020........................1-1/4 x 1-1/4
Straight Union M/FBSPP x BSPP
P/Number................................... ThreadCP24-0404 ...............................1/4 x 1/4CP24-0606 ...............................3/8 x 3/8CP24-0608 ...............................3/8 x 1/2CP24-0808 ...............................1/2 x 1/2CP24-1212 ...............................3/4 x 3/4CP24-1616 .....................................1 x 1CP24-1620 .............................. 1 x 1-1/4CP24-2020 ........................1-1/4 x 1-1/4
Straight Union M/FBSPP x BSPP
with 7/16" UNO Gauge Point
P/Number ................................... ThreadCP24G-040407............. 1/4 x 1/4 x 7/16CP24G-060607............. 3/8 x 3/8 x 7/16CP24G-080807............. 1/2 x 1/2 x 7/16CP24G-121207............. 3/4 x 3/4 x 7/16CP24G-161607................... 1 x 1 x 7/16CP24G-202007...... 1-1/4 x 1-1/4 x 7/16
Straight Union M/FNPTF x NPSM
P/Number ................................... ThreadCN24-0202.............................. 1/8 x 1/8CN24-0404.............................. 1/4 x 1/4CN24-0606.............................. 3/8 x 3/8
* CN24-0608.............................. 3/8 x 1/2CN24-0808.............................. 1/2 x 1/2CN24-1212.............................. 3/4 x 3/4CN24-1616.................................... 1 x 1CN24-2020........................1-1/4 x 1-1/4CN24-2424........................1-1/2 x 1-1/2
Straight Union F/FBSPT x BSPP
P/Number ................................... ThreadCB25-0404 .............................. 1/4 x 1/4CB25-0606 .............................. 3/8 x 3/8CB25-0808 .............................. 1/2 x 1/2CB25-1212 .............................. 3/4 x 3/4CB25-1616 .................................... 1 x 1
Straight Union F/FNPTF x NPSM
P/Number ................................... Thread* CN25-0404.............................. 1/4 x 1/4
CN25-0606.............................. 3/8 x 3/8CN25-0808.............................. 1/2 x 1/2CN25-1212.............................. 3/4 x 3/4CN25-1616.................................... 1 x 1
Straight Union F/FSWIVEL
x JIC
P/Number ...................................ThreadCS25-0707...........................7/16 x 7/16CS25-0909...........................9/16 x 9/16CS25-1212...............................3/4 x 3/4CS25-1414...............................7/8 x 7/8CS25-1717.................... 1-1/16 x 1-1/16CS25-2121.................... 1-5/16 x 1-5/16
Straight Union M/FS.A.E. ‘O’ Ring Boss
x JIC
P/Number ...................................ThreadC26-0707 .............................7/16 x 7/16C26-0909 .............................9/16 x 9/16C26-0912 ...............................9/16 x 3/4C26-1209 ...............................3/4 x 9/16C26-1212 .................................3/4 x 3/4C26-1414 .................................7/8 x 7/8C26-1417 ............................7/8 x 1-1/16C26-1717 ...................... 1-1/16 x 1-1/16C26-2121 ...................... 1-5/16 x 1-5/16C26-2626 .......................... 1-5/8 x 1-5/8
* C26-3030 .......................... 1-7/8 x 1-7/8Straight Union M/FS.A.E. ‘O’ Ring Boss
x BSPP
P/Number ...................................ThreadCB26-0704 ............................7/16 x 1/4CB26-0904 ............................9/16 x 1/4CB26-1206 ..............................3/4 x 3/8CB26-1208 ..............................3/4 x 1/2CB26-1406 ..............................7/8 x 3/8CB26-1408 ..............................7/8 x 1/2
* CB26-1412 ..............................7/8 x 3/4CB26-1712 .........................1-1/16 x 3/4CB26-2116 ............................1-5/16 x 1
* CB26-2620 ....................... 1-5/8 x 1-1/4
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.19
*Manufactured To Order (minimum qtys may apply)
Straight Union M/FS.A.E. ‘O’ Ring Boss
x NPSM
P/Number ................................... Thread* CN26-1206.............................. 3/4 x 3/8
CN26-1208.............................. 3/4 x 1/2* CN26-1408.............................. 7/8 x 1/2* CN26-1412.............................. 7/8 x 3/4* CN26-1712.........................1-1/16 x 3/4* CN26-2116............................1-5/16 x 1
CN26-2620....................... 1-5/8 x 1-1/4Straight Union M/F
JIC x JICwith 7/16" UNO Gauge Point
P/Number ................................... ThreadC27G-070707........... 7/16 x 7/16 x 7/16C27G-090907........... 9/16 x 9/16 x 7/16C27G-121207............... 3/4 x 3/4 x 7/16C27G-141407............... 7/8 x 7/8 x 7/16C27G-171707.... 1-1/16 x 1-1/16 x 7/16C27G-212107.... 1-5/16 x 1-5/16 x 7/16C27G-262607........ 1-5/8 x 1-5/8 x 7/16
Straight Union M/FBSPT x JIC
P/Number ................................... ThreadCB27-0207 ............................ 1/8 x 7/16CB27-0407 ............................ 1/4 x 7/16CB27-0409 ............................ 1/4 x 9/16CB27-0609 ............................ 3/8 x 9/16CB27-0612 .............................. 3/8 x 3/4CB27-0614 .............................. 3/8 x 7/8CB27-0812 .............................. 1/2 x 3/4CB27-0814 .............................. 1/2 x 7/8CB27-0817 .........................1/2 x 1-1/16CB27-1217 .........................3/4 x 1-1/16CB27-1621 ............................1 x 1-5/16CB27-2026 ....................... 1-1/4 x 1-5/8
Straight Union M/FBSPP x JIC
P/Number....................................ThreadCP27-0407.............................1/4 x 7/16CP27-0409.............................1/4 x 9/16CP27-0609.............................3/8 x 9/16CP27-0612...............................3/8 x 3/4CP27-0614...............................3/8 x 7/8CP27-0812...............................1/2 x 3/4CP27-0814...............................1/2 x 7/8CP27-1214...............................3/4 x 7/8CP27-1217......................... 3/4 x 1-1/16CP27-1617.............................1 x 1-1/16CP27-1621.............................1 x 1-5/16CP27-1626...............................1 x 1-5/8CP27-2021...................... 1-1/4 x 1-5/16CP27-2026........................ 1-1/4 x 1-5/8CP27-2430........................ 1-1/2 x 1-7/8
Straight Union M/FNPTF x JIC
P/Number....................................ThreadCN27-0407 ............................1/4 x 7/16CN27-0409 ............................1/4 x 9/16CN27-0609 ............................3/8 x 9/16CN27-0612 ..............................3/8 x 3/4CN27-0812 ..............................1/2 x 3/4CN27-0814 ..............................1/2 x 7/8CN27-1217 ........................ 3/4 x 1-1/16CN27-1621 ............................1 x 1-5/16
Straight Union M/FBSPP x JIC
Encapsulated Seal
P/Number....................................ThreadCR27-0407 ............................1/4 x 7/16CR27-0409 ............................1/4 x 9/16CR27-0609 ............................3/8 x 9/16CR27-0612 ..............................3/8 x 3/4CR27-0614 ..............................3/8 x 7/8CR27-0812 ..............................1/2 x 3/4CR27-0814 ..............................1/2 x 7/8
* CR27-1214 ..............................3/4 x 7/8* CR27-1217 ........................ 3/4 x 1-1/16
CR27-1617 ............................1 x 1-1/16CR27-1621 ............................1 x 1-5/16CR27-2026 ....................... 1-1/4 x 1-5/8
Straight Union M/FORFS x ORFS
with 7/16" UNO Gauge Point
P/Number................................... ThreadF27G-111107....... 11/16 x 11/16 x 7/16F27G-131307....... 13/16 x 13/16 x 7/16F27G-161607......................1 x 1 x 7/16F27G-191907.....1-3/16 x 1-3/16 x 7/16F27G-232307.....1-7/16 x 1-7/16 x 7/16F27G-272707.1-11/16 x 1-11/16 x 7/16
Gauge Adaptor Union F/F BSPP x JIC Gauge
P/Number................................... ThreadCP28-0409G ..........................1/4 x 9/16
Straight Union M/FORFS x JIC
P/Number................................... ThreadF28-1109............................11/16 x 9/16F28-1312..............................13/16 x 3/4F28-1614.....................................1 x 7/8
* F28-1917.......................1-3/16 x 1-1/16F28-2321.......................1-7/16 x 1-5/16
Straight Union F/MORFS x JIC
P/Number................................... ThreadF29-0907..............................9/16 x 7/16F29-1109............................11/16 x 9/16F29-1312..............................13/16 x 3/4F29-1614.....................................1 x 7/8F29-1917.......................1-3/16 x 1-1/16F29-2321.......................1-7/16 x 1-5/16
* F29-2726.......................1-11/16 x 1-5/8
4.20 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
45 deg Union M/FJIC x JIC
P/Number................................... ThreadC30-0707F ...........................7/16 x 7/16C30-0709F ...........................7/16 x 9/16C30-0808F ...............................5/8 x 5/8C30-0909F ...........................9/16 x 9/16C30-1212F ...............................3/4 x 3/4C30-1412F ...............................7/8 x 3/4C30-1414F ...............................7/8 x 7/8C30-1717F ....................1-1/16 x 1-1/16C30-2121F ....................1-5/16 x 1-5/16C30-2626F ........................1-5/8 x 1-5/8C30-3030 ..........................1-7/8 x 1-7/8C30-4040 ..........................2-1/2 x 2-1/2
45 deg Union M/FBSPT x BSPP
P/Number................................... ThreadCB30-0202F ............................1/8 x 1/8CB30-0404F ............................1/4 x 1/4CB30-0606F ............................3/8 x 3/8CB30-0808F ............................1/2 x 1/2CB30-1212F ............................3/4 x 3/4CB30-1616F ..................................1 x 1
45 deg Union M/FNPTF x NPSM
P/Number................................... ThreadCN30-0202 ..............................1/8 x 1/8
* CN30-0404 ..............................1/4 x 1/4* CN30-0606 ..............................3/8 x 3/8* CN30-0808 ..............................1/2 x 1/2* CN30-1212 ..............................3/4 x 3/4* CN30-1616 ....................................1 x 1
45 deg Union M/FORFS x ORFS
P/Number................................... ThreadF30-0909..............................9/16 x 9/16F30-1111..........................11/16 x 11/16F30-1313..........................13/16 x 13/16F30-1616........................................1 x 1F30-1919.......................1-3/16 x 1-3/16F30-2323.......................1-7/16 x 1-7/16
45 deg Union M/FS.A.E. ‘O’ Ring Boss
x JIC
P/Number ................................... ThreadC31-0909............................. 9/16 x 9/16C31-1212................................. 3/4 x 3/4C31-1414................................. 7/8 x 7/8
* C31-1717.......................1-1/16 x 1-1/16C31-2121.......................1-5/16 x 1-5/16
45 deg Union M/FS.A.E. ‘O’ Ring Boss
x NPSM
P/Number ................................... ThreadCN31-1208.............................. 3/4 x 1/2CN31-1408.............................. 7/8 x 1/2
45 deg Elbow M/MBSPT x BSPT
P/Number ................................... ThreadCB36-0202F............................ 1/8 x 1/8CB36-0404F............................ 1/4 x 1/4CB36-0606F............................ 3/8 x 3/8CB36-0808F............................ 1/2 x 1/2CB36-1208F............................ 3/4 x 1/2CB36-1212F............................ 3/4 x 3/4CB36-1612F............................... 1 x 3/4CB36-1616F.................................. 1 x 1
* CB36-2424 ........................1-1/2 x 1-1/2
Elbow 45 deg M/MNPTF x NPTF
P/Number ................................... ThreadCN36-0202.............................. 1/8 x 1/8
* CN36-0404F............................ 1/4 x 1/4* CN36-0606.............................. 3/8 x 3/8* CN36-0808.............................. 1/2 x 1/2* CN36-1212.............................. 3/4 x 3/4* CN36-1616.................................... 1 x 1
45 deg Elbow M/FBSPT x BSPT
P/Number ...................................ThreadCB37-0202F ............................1/8 x 1/8CB37-0404F ............................1/4 x 1/4CB37-0606F ............................3/8 x 3/8CB37-0808F ............................1/2 x 1/2CB37-1212F ............................3/4 x 3/4CB37-1616F .................................. 1 x 1
45 deg Elbow M/FNPTF x NPTF
P/Number ...................................ThreadCN37-0202F............................1/8 x 1/8CN37-0404F............................1/4 x 1/4CN37-0606F............................3/8 x 3/8CN37-0808F............................1/2 x 1/2CN37-1212F............................3/4 x 3/4CN37-1616F.................................. 1 x 1CN37-2020 ....................... 1-1/4 x 1-1/4
Elbow 45 deg M/MBSPT x JIC
P/Number ...................................ThreadCB38-0207F ..........................1/8 x 7/16CB38-0407F ..........................1/4 x 7/16CB38-0408F ............................1/4 x 1/2CB38-0409F ..........................1/4 x 9/16CB38-0412F ............................1/4 x 3/4CB38-0609F ..........................3/8 x 9/16CB38-0612F ............................3/8 x 3/4CB38-0614 ..............................3/8 x 7/8CB38-0809F ..........................1/2 x 9/16CB38-0812F ............................1/2 x 3/4CB38-0814F ............................1/2 x 7/8CB38-0817F .......................1/2 x 1-1/16CB38-1214F ............................3/4 x 7/8CB38-1217F .......................3/4 x 1-1/16CB38-1221F .......................3/4 x 1-5/16CB38-1621F ..........................1 x 1-5/16CB38-1626F ............................1 x 1-1/2CB38-2026F ..................... 1-1/4 x 1-1/2CB38-2430 ....................... 1-1/2 x 1-7/8CB38-3240 ..............................2 x 2-1/2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.21
*Manufactured To Order (minimum qtys may apply)
Elbow 45 deg M/MBSPT x JIS
P/Number ................................... Thread* CBJ38-0404 ............................ 1/4 x 1/4
CBJ38-0606 ............................ 3/8 x 3/8CBJ38-0808 ............................ 1/2 x 1/2CBJ38-1212 ............................ 3/4 x 3/4CBJ38-1616 .................................. 1 x 1
45 deg Elbow. M/MBSPP x JIC
P/Number ................................... ThreadCP38-0407F .......................... 1/4 x 7/16CP38-0409F .......................... 1/4 x 9/16CP38-0412F ............................ 1/4 x 3/4CP38-0609F .......................... 3/8 x 9/16CP38-0612F ............................ 3/8 x 3/4CP38-0809F .......................... 1/2 x 9/16CP38-0812F ............................ 1/2 x 3/4CP38-0814F ............................ 1/2 x 7/8CP38-0817F .......................1/2 x 1-1/16CP38-1212F ............................ 3/4 x 3/4CP38-1217F .......................3/4 x 1-1/16CP38-1621 ............................1 x 1-5/16CP38-2026F ..................... 1-1/4 x 1-5/8
* CP38-2430 ....................... 1-1/2 x 1-7/8
45 deg Elbow. M/MNPTF x JIC
P/Number....................................ThreadCN38-0207F..........................1/8 x 7/16CN38-0407F..........................1/4 x 7/16CN38-0409F..........................1/4 x 9/16CN38-0412F............................1/4 x 3/4CN38-0609F..........................3/8 x 9/16CN38-0612F............................3/8 x 3/4CN38-0614 ..............................3/8 x 7/8CN38-0809F..........................1/2 x 9/16CN38-0812F............................1/2 x 3/4CN38-0814F............................1/2 x 7/8CN38-1212 ................................... 35.60CN38-1214F............................3/4 x 7/8CN38-1217F...................... 3/4 x 1-1/16CN38-1221 ................................... 52.00CN38-1617F..........................1 x 1-1/16CN38-1621F..........................1 x 1-5/16CN38-1626 ..............................1 x 1-5/8CN38-2021 ..................... 1-1/4 x 1-5/16CN38-2026F..................... 1-1/4 x 1-5/8CN38-2030 ....................... 1-1/4 x 1-7/8CN38-2430 ....................... 1-1/2 x 1-7/8CN38-3230 ..............................2 x 1-7/8CN38-3240 ..............................2 x 2-1/2
45 deg Elbow. F/FBSPT x BSPT
P/Number....................................ThreadCB39-0404F ............................1/4 x 1/4CB39-0606F ............................3/8 x 3/8CB39-0808F ............................1/2 x 1/2CB39-1212F ............................3/4 x 3/4CB39-1616F .................................. 1 x 1
45 deg Elbow. M/MS.A.E. ‘O’ Ring Boss
x JIC
P/Number................................... ThreadC40-0707F ...........................7/16 x 7/16C40-0907F ...........................9/16 x 7/16C40-0909F ...........................9/16 x 9/16C40-0912F .............................9/16 x 3/4C40-1209F .............................3/4 x 9/16C40-1212F ...............................3/4 x 3/4C40-1214F ...............................3/4 x 7/8C40-1412F ...............................7/8 x 3/4C40-1414F ...............................7/8 x 7/8C40-1417F ......................... 7/8 x 1-1/16C40-1712 ........................... 1-1/16 x 3/4C40-1714F ......................... 1-1/16 x 7/8C40-1717F ....................1-1/16 x 1-1/16C40-1721F ....................1-1/16 x 1-5/16C40-2117F ....................1-5/16 x 1-1/16C40-2121F ....................1-5/16 x 1-5/16C40-2126F ......................1-5/16 x 1-5/8C40-2621F ......................1-5/8 x 1-5/16C40-2626F ........................1-5/8 x 1-5/8C40-3030 ..........................1-7/8 x 1-7/8
* C40-4040 ..........................2-1/2 x 2-1/2
Clamp-on 45 deg Elbow. M/MS.A.E. ‘O’ Ring Boss x Tail
P/Number...............Thread............HoseC41-1212 ...............3/4 .....................3/4
* C41-1408 ...............7/8 .....................1/2C41-1716 ...............1-1/16...................1
* C41-2116 ...............1-5/16...................1* C41-2120 ...............1-5/16............ 1-1/4* C41-2124 ...............1-5/16............ 1-1/2* C41-2620 ...............1-5/8.............. 1-1/4* C41-2624 ...............1-5/8.............. 1-1/2
4.22 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Clamp-on 45 deg Elbow. M/MBSPT x Tail
P/Number................Thread ...........HoseCB41-0808..............1/2 ....................1/2
* CB41-0812..............1/2 ....................3/4CB41-1212..............3/4 ....................3/4CB41-1216..............3/4 .......................1CB41-1616..............1 ..........................1CB41-1620..............1 ................... 1-1/4CB41-2020..............1-1/4............. 1-1/4CB41-2024..............1-1/4............. 1-1/2
Clamp-on 45 deg Elbow. M/MNPTF x Tail
P/Number................Thread ...........Hose* CN41-0608 .............3/8 ....................1/2* CN41-0812 .............1/2 ....................3/4
CN41-1212 .............3/4 ....................3/4CN41-1216 .............3/4 .......................1CN41-1220 .............3/4 ................ 1-1/4CN41-1616 .............1 ..........................1CN41-1620 .............1 ................... 1-1/4
* CN41-2020 .............1-1/4............. 1-1/4
Bulkhead Elbow 45 deg. M/M JIC x JIC
P/Number................................... ThreadC42-0707 .............................7/16 x 7/16C42-0909 .............................9/16 x 9/16C42-1212 .................................3/4 x 3/4C42-1414 .................................7/8 x 7/8C42-1717 ......................1-1/16 x 1-1/16C42-2121 ......................1-5/16 x 1-5/16
* C42-2626 ..........................1-5/8 x 1-5/8
90 deg Union M/FJIC x JIC
P/Number ................................... ThreadC46-0707F .......................... 7/16 x 7/16C46-0808F .............................. 1/2 x 1/2C46-0909F .......................... 9/16 x 9/16C46-1212F .............................. 3/4 x 3/4C46-1214F .............................. 3/4 x 7/8C46-1412F .............................. 7/8 x 3/4C46-1414F .............................. 7/8 x 7/8C46-1417F .........................7/8 x 1-1/16C46-1714F .........................1-1/16 x 7/8C46-1717F ....................1-1/16 x 1-1/16C46-2121F ....................1-5/16 x 1-5/16C46-2626F ...........................1-5/8 1-5/8C46-3030F ........................1-7/8 x 1-7/8C46-4040...........................2-1/2 x 2-1/2
90 deg Union M/F BSPT x BSPP
P/Number ................................... ThreadCB46-0202F............................ 1/8 x 1/8CB46-0404F............................ 1/4 x 1/4CB46-0406F............................ 1/4 x 3/8CB46-0604F............................ 3/8 x 1/4CB46-0606F............................ 3/8 x 3/8CB46-0608F............................ 3/8 x 1/2CB46-0806F............................ 1/2 x 3/8CB46-0808F............................ 1/2 x 1/2CB46-1208F............................ 3/4 x 1/2CB46-1212F............................ 3/4 x 3/4CB46-1616F.................................. 1 x 1CB46-2020 ........................1-1/4 x 1-1/4CB46-2424 ........................1-1/2 x 1-1/2CB46-3232 .................................... 2 x 2
90 deg Union M/FBSPP x BSPP
P/Number ................................... ThreadCP46-0404F ............................ 1/4 x 1/4CP46-0606F ............................ 3/8 x 3/8CP46-0808F ............................ 1/2 x 1/2CP46-1212F ............................ 3/4 x 3/4CP46-1216F ............................... 3/4 x 1CP46-1616F .................................. 1 x 1
90 deg Union M/FNPTF x NPSM
P/Number ...................................ThreadCN46-0202 ..............................1/8 x 1/8CN46-0404F............................1/4 x 1/4CN46-0606F............................3/8 x 3/8CN46-0808F............................1/2 x 1/2CN46-1212F............................3/4 x 3/4CN46-1616F.................................. 1 x 1
90 deg Union M/FORFS x ORFS
P/Number ...................................ThreadF46-0909F ...........................9/16 x 9/16F46-1111F .......................11/16 x 11/16F46-1313F .......................13/16 x 13/16F46-1616F ..................................... 1 x 1F46-1919F .................... 1-3/16 x 1-3/16F46-2323F .................... 1-7/16 x 1-7/16
90 deg Union M/FS.A.E. ‘O’ Ring Boss
x JIC
P/Number ...................................ThreadC47-0707F...........................7/16 x 7/16C47-0909F...........................9/16 x 9/16C47-1209F.............................3/4 x 9/16C47-1212F...............................3/4 x 3/4C47-1412F...............................7/8 x 3/4C47-1414F...............................7/8 x 7/8C47-1717F.................... 1-1/16 x 1-1/16C47-2121F.................... 1-5/16 x 1-5/16
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.23
*Manufactured To Order (minimum qtys may apply)
90 deg Union M/FS.A.E. ‘O’ Ring Boss
x BSPP
P/Number ................................... ThreadCB47-0904F.......................... 9/16 x 1/4CB47-0906F.......................... 9/16 x 3/8CB47-1206F............................ 3/4 x 3/8CB47-1208F............................ 3/4 x 1/2CB47-1408F............................ 7/8 x 1/2CB47-1712F.......................1-1/16 x 3/4CB47-2116F..........................1-5/16 x 1
90 deg Union M/FS.A.E. ‘O’ Ring Boss
x NPSM
P/Number ................................... Thread* CN47-0904............................ 9/16 x 1/4* CN47-1206.............................. 3/4 x 3/8* CN47-1208.............................. 3/4 x 1/2* CN47-1408.............................. 7/8 x 1/2* CN47-1712.........................1-1/16 x 3/4* CN47-2116............................1-5/16 x 1* CN47-2620....................... 1-5/8 x 1-1/4
90 deg Elbow F/FBSPT x JIC
P/Number ................................... ThreadCB48-0209F.......................... 1/8 x 9/16CB48-1217F.......................3/4 x 1-1/16
90 deg Elbow M/MSAE O-Ring Boss x SAE O-Ring Boss
P/Number....................................ThreadZC52-0909F ........................9/16 x 9/16ZC52-1212...............................3/4 x 3/4ZC52-1412...............................7/8 x 3/4ZC52-1717.................... 1-1/16 x 1-1/16
90 deg Elbow M/MBSPT x BSPT
P/Number....................................ThreadCB53-0202F ............................1/8 x 1/8CB53-0402F ............................1/4 x 1/8CB53-0404F ............................1/4 x 1/4CB53-0604F ............................3/8 x 1/4CB53-0606F ............................3/8 x 3/8CB53-0804F ............................1/2 x 1/4CB53-0806F ............................1/2 x 3/8CB53-0808F ............................1/2 x 1/2CB53-1208F ............................3/4 x 1/2CB53-1212F ............................3/4 x 3/4CB53-1612F ...............................1 x 3/4CB53-1616F .................................. 1 x 1CB53-2012F ........................ 1-1/4 x 3/4CB53-2016F ............................1-1/4 x 1CB53-2020F ..................... 1-1/4 x 1-1/4CB53-2424F ..................... 1-1/2 x 1-1/2CB53-3232 .................................... 2 x 2
90 deg Elbow M/MBSPT Swivel x BSPT
P/Number....................................ThreadCBS53-0606 ............................3/8 x 3/8CBS53-0808 ............................1/2 x 1/2CBS53-1208 ............................3/4 x 1/2
* CBS53-1212 ............................3/4 x 3/4
90 deg Elbow M/MBSPP x BSPT
P/Number................................... ThreadCPB53-0404F ..........................1/4 x 1/4CPB53-0406F ..........................1/4 x 3/8CPB53-0604F ..........................3/8 x 1/4CPB53-0606F ..........................3/8 x 3/8CPB53-0608F ..........................3/8 x 1/2CPB53-0806F ..........................1/2 x 3/8CPB53-0808F ..........................1/2 x 1/2CPB53-0812F .........................1 2/ x 3/4CPB53-1212F ..........................3/4 x 3/4CPB53-1612F .............................1 x 3/4CPB53-1616F ................................1 x 1CPB53-2020F ...................1-1/4 x 1-1/4CPB53-2424F ...................1-1/2 x 1-1/2
90 deg Elbow M/MBSPP Swivel x BSPT
P/Number................................... ThreadCPBS53-0606 ..........................3/8 x 3/8CPBS53-0808 ..........................1/2 x 1/2CPBS53-1208 ..........................3/4 x 1/2
90 deg Elbow M/MORFS x ORFS
P/Number................................... ThreadF53-0909..............................9/16 x 9/16F53-1111..........................11/16 x 11/16F53-1313..........................13/16 x 13/16F53-1616........................................1 x 1F53-1919.......................1-3/16 x 1-3/16F53-2323.......................1-7/16 x 1-7/16
4.24 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
90 deg Elbow M/MNPTF x NPTF
P/Number................................... ThreadCN53-0202F ............................1/8 x 1/8CN53-0404F ............................1/4 x 1/4CN53-0604 ..............................3/8 x 1/4CN53-0606F ............................3/8 x 3/8
* CN53-0804 ..............................1/2 x 1/4CN53-0806F ............................1/2 x 3/8CN53-0808F ............................1/2 x 1/2CN53-1208F ............................3/4 x 1/2CN53-1212F ............................3/4 x 3/4CN53-1612F ...............................1 x 3/4CN53-1616F ..................................1 x 1CN53-2020F .....................1-1/4 x 1-1/4CN53-2424F .....................1-1/2 x 1-1/2CN53-3232 ....................................2 x 2
90 deg Elbow M/MBSPP x BSPP
P/Number................................... Thread* CP53-0404 ...............................1/4 x 1/4
CP53-0606 ...............................3/8 x 3/8* CP53-0808 ...............................1/2 x 1/2
90 deg Elbow M/FBSPT x BSPT
P/Number................................... ThreadCB54-0202F ............................1/8 x 1/8CB54-0204F ............................1/8 x 1/4CB54-0404F ............................1/4 x 1/4CB54-0606F ............................3/8 x 3/8CB54-0608F ............................3/8 x 1/2CB54-0806F ............................1/2 x 3/8CB54-0808F ............................1/2 x 1/2CB54-0812F ............................1/2 x 3/4CB54-1208F ............................3/4 x 1/2CB54-1212F ............................3/4 x 3/4CB54-1616F ..................................1 x 1CB54-2020F .....................1-1/4 x 1-1/4CB54-2424........................1-1/2 x 1-1/2CB54-3232.....................................2 x 2
90 deg Elbow M/FNPTF x NPTF
P/Number ................................... ThreadCN54-0202F............................ 1/8 x 1/8CN54-0204F............................ 1/8 x 1/4CN54-0404F............................ 1/4 x 1/4CN54-0406F............................ 1/4 x 3/8CN54-0606F............................ 3/8 x 3/8CN54-0806F............................ 1/2 x 3/8CN54-0808F............................ 1/2 x 1/2CN54-1212F............................ 3/4 x 3/4
* CN54-1216F............................... 3/4 x 1CN54-1616F.................................. 1 x 1CN54-2020F......................1-1/4 x 1-1/4CN54-2424........................1-1/2 x 1-1/2CN54-3232.................................... 2 x 2
90 deg Elbow M/FBSPP x SAE ’O’ Ring
P/Number ................................... ThreadCPU54-0609F ....................... 3/8 x 9/16
90 deg Elbow M/FSAE ’O’ Ring Boss
x SAE ’O’ Ring
P/Number ................................... ThreadCU54-0909F........................ 9/16 x 9/16CU54-1209F.......................... 3/4 x 9/16
90 deg Elbow F/FBSPT x BSPT
P/Number ................................... ThreadCB55-0202F............................ 1/8 x 1/8CB55-0404F............................ 1/4 x 1/4CB55-0606F............................ 3/8 x 3/8CB55-0806F............................ 1/2 x 3/8CB55-0808F............................ 1/2 x 1/2CB55-1208F............................ 3/4 x 1/2CB55-1212F............................ 3/4 x 3/4CB55-1616F.................................. 1 x 1CB55-2020F......................1-1/4 x 1-1/4CB55-2424 ........................1-1/2 x 1-1/2
90 deg Elbow F/FNPTF x NPTF
P/Number ...................................ThreadCN55-0202F............................1/8 x 1/8CN55-0404F............................1/4 x 1/4CN55-0606F............................3/8 x 3/8CN55-0806 ..............................1/2 x 3/8CN55-0808F............................1/2 x 1/2CN55-1208 ..............................3/4 x 1/2CN55-1212F............................3/4 x 3/4CN55-1616F.................................. 1 x 1CN55-2020F..................... 1-1/4 x 1-1/4
* CN55-2424 ....................... 1-1/2 x 1-1/290 deg Elbow M/M
BSPT x JIC
P/Number ...................................Thread* CB56-0206F ............................1/8 x 3/8
CB56-0207F ..........................1/8 x 7/16CB56-0208F ............................1/8 x 1/2CB56-0209F ..........................1/8 x 9/16CB56-0407F ..........................1/4 x 7/16CB56-0408F ............................1/4 x 1/2CB56-0409F ..........................1/4 x 9/16CB56-0412F ............................1/4 x 3/4CB56-0607F ..........................3/8 x 7/16CB56-0609F ..........................3/8 x 9/16CB56-0612F ............................3/8 x 3/4CB56-0614F ............................3/8 x 7/8CB56-0807F ..........................1/2 x 7/16CB56-0809F ..........................1/2 x 9/16CB56-0812F ............................1/2 x 3/4CB56-0814F ............................1/2 x 7/8CB56-0817F .......................1/2 x 1-1/16CB56-1209F ..........................3/4 x 9/16CB56-1212F ............................3/4 x 3/4CB56-1214F ............................3/4 x 7/8CB56-1217F .......................3/4 x 1-1/16CB56-1221F .......................3/4 x 1-5/16CB56-1612F ............................... 1 x 3/4CB56-1614F ............................... 1 x 7/8CB56-1617F ..........................1 x 1-1/16CB56-1621F ..........................1 x 1-5/16CB56-1626F ............................1 x 1-5/8CB56-2017F ................... 1-1/4 x 1-1/16CB56-2021F ................... 1-1/4 x 1-5/16CB56-2026F ..................... 1-1/4 x 1-5/8CB56-2030 ....................... 1-1/4 x 1-7/8CB56-2426F ..................... 1-1/2 x 1-5/8CB56-2430F ..................... 1-1/2 x 1-7/8
* CB56-2440 ....................... 1-1/2 x 2-1/2* CB56-3230 ..............................2 x 1-7/8
CB56-3240 ..............................2 x 2-1/2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.25
*Manufactured To Order (minimum qtys may apply)
90 deg Elbow M/MBSPT x JIS
P/Number ................................... ThreadCBJ56-0404F .......................... 1/4 x 1/4CBJ56-0606 ............................ 3/8 x 3/8CBJ56-0808 ............................ 1/2 x 1/2CBJ56-1212 ............................ 3/4 x 3/4CBJ56-1616 .................................. 1 x 1
90 deg Elbow M/MBSPP x JIC
P/Number ................................... ThreadCP56-0207F .......................... 1/8 x 7/16CP56-0209F .......................... 1/8 x 9/16CP56-0407F .......................... 1/4 x 7/16CP56-0409F .......................... 1/4 x 9/16CP56-0412F ............................ 1/4 x 3/4CP56-0607F .......................... 3/8 x 7/16CP56-0609F .......................... 3/8 x 9/16CP56-0612F ............................ 3/8 x 3/4CP56-0614F ............................ 3/8 x 7/8CP56-0809F .......................... 1/2 x 9/16CP56-0812F ............................ 1/2 x 3/4CP56-0814F ............................ 1/2 x 7/8CP56-0817F .......................1/2 x 1-1/16CP56-0821F .......................1/2 x 1-5/16CP56-1212F ............................ 3/4 x 3/4CP56-1214F ............................ 3/4 x 7/8CP56-1217F .......................3/4 x 1-1/16CP56-1221F .......................3/4 x 1-5/16CP56-1617F ..........................1 x 1-1/16CP56-1621F ..........................1 x 1-5/16CP56-1626F ............................1 x 1-5/8CP56-2017F ................... 1-1/4 x 1-1/16CP56-2021F ................... 1-1/4 x 1-5/16CP56-2026F ..................... 1-1/4 x 1-5/8CP56-2030F ..................... 1-1/4 x 1-7/8CP56-2421F ................... 1-1/2 x 1-5/16CP56-2426F ..................... 1-1/2 x 1-5/8CP56-2430F ..................... 1-1/2 x 1-7/8CP56-3240 ..............................2 x 2-1/2
90 deg Elbow M/MMetric x JIC
P/Number....................................ThreadCM56-1207F .............. M12x1.5 x 7/16CM56-1409F .............. M14x1.5 x 9/16CM56-1609F .............. M16x1.5 x 9/16CM56-1809F .............. M18x1.5 x 9/16CM56-1812F ................ M18x1.5 x 3/4CM56-2212 .................. M22x1.5 x 3/4
90 deg Elbow M/MNPTF x JIC
P/Number....................................ThreadCN56-0207F..........................1/8 x 7/16CN56-0208F............................1/8 x 1/2CN56-0209F..........................1/8 x 9/16CN56-0407F..........................1/4 x 7/16CN56-0408 ..............................1/4 x 1/2CN56-0409F..........................1/4 x 9/16CN56-0412F............................1/4 x 3/4CN56-0607F..........................3/8 x 7/16CN56-0609F..........................3/8 x 9/16CN56-0612F............................3/8 x 3/4CN56-0614F............................3/8 x 7/8
* CN56-0617 ........................ 3/8 x 1-1/16CN56-0807F..........................1/2 x 7/16CN56-0809F..........................1/2 x 9/16CN56-0812F............................1/2 x 3/4CN56-0814F............................1/2 x 7/8CN56-0817F...................... 1/2 x 1-1/16CN56-1207F..........................3/4 x 7/16CN56-1209F..........................3/4 x 9/16CN56-1212F............................3/4 x 3/4CN56-1214F............................3/4 x 7/8CN56-1217F...................... 3/4 x 1-1/16CN56-1221F...................... 3/4 x 1-5/16CN56-1617F..........................1 x 1-1/16CN56-1621F..........................1 x 1-5/16CN56-1626F............................1 x 1-5/8CN56-2017F................... 1-1/4 x 1-1/16CN56-2021F................... 1-1/4 x 1-5/16CN56-2026F..................... 1-1/4 x 1-5/8CN56-2030F..................... 1-1/4 x 1-7/8CN56-2426F..................... 1-1/2 x 1-5/8CN56-2430 ....................... 1-1/2 x 1-7/8CN56-3240 ..............................2 x 2-1/2
90 deg Elbow M/MBSPP x ORFS
P/Number................................... ThreadFP56-0811F .........................1/2 x 11/16FP56-0813F .........................1/2 x 13/16FP56-0816F ................................1/2 x 1FP56-0819F ....................... 1/2 x 1-3/16FP56-1213F .........................3/4 x 13/16FP56-1216F ................................3/4 x 1
90 deg Elbow M/MBSPT Extended x JIC
P/Number................................... ThreadCB57-0207.............................1/8 x 7/16CB57-0407.............................1/4 x 7/16CB57-0409.............................1/4 x 9/16CB57-0609.............................3/8 x 9/16CB57-0612...............................3/8 x 3/4CB57-0812...............................1/2 x 3/4CB57-0814...............................1/2 x 7/8
* CB57-1217......................... 3/4 x 1-1/16CB57-1621............................ 1 x 1-5/16
90 deg Elbow M/MBSPT Swivel x JIC
P/Number................................... ThreadCBS57-0407 ..........................1/4 x 7/16CBS57-0612 ............................3/8 x 3/4CBS57-0812 ............................1/2 x 3/4CBS57-0814 ............................1/2 x 7/8
* CBS57-0817 ...................... 1/2 x 1-1/16CBS57-1217 ...................... 3/4 x 1-1/16CBS57-1221 ...................... 3/4 x 1-5/16
* CBS57-1621 ......................... 1 x 1-5/16
4.26 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
90 deg Elbow M/MBSPP Extended x JIC
P/Number................................... ThreadCP57-0612 ...............................3/8 x 3/4CP57-0814 ...............................1/2 x 7/8
* CP57-1217 ......................... 3/4 x 1-1/16* CP57-1221 ......................... 3/4 x 1-5/16* CP57-1621 ............................ 1 x 1-5/16
90 deg Elbow M/MNPTF Extended x JIC
P/Number................................... ThreadCN57-0207 ............................1/8 x 7/16
* CN57-0209 ............................1/8 x 9/16CN57-0407 ............................1/4 x 7/16
* CN57-0409 ............................1/4 x 9/16CN57-0609 ............................3/8 x 9/16
* CN57-0612 ..............................3/8 x 3/4* CN57-0812 ..............................1/2 x 3/4
CN57-0814 ..............................1/2 x 7/8* CN57-1212 ..............................3/4 x 3/4* CN57-1217 ........................ 3/4 x 1-1/16* CN57-1621 ........................... 1 x 1-5/16
90 deg Elbow M/MJIC x JIC
P/Number ................................... ThreadC58-0606................................. 3/8 x 3/8C58-0707F .......................... 7/16 x 7/16C58-0808F .............................. 1/2 x 1/2C58-0908............................... 9/16 x 1/2C58-0909F .......................... 9/16 x 9/16C58-1209F ............................ 3/4 x 9/16C58-1212F .............................. 3/4 x 3/4C58-1412F .............................. 7/8 x 3/4C58-1414F .............................. 7/8 x 7/8C58-1712F .........................1-1/16 x 3/4C58-1714F .........................1-1/16 x 7/8C58-1717F ....................1-1/16 x 1-1/16C58-2117F ....................1-5/16 x 1-1/16C58-2121F ....................1-5/16 x 1-5/16C58-2626F ........................1-5/8 x 1-5/8C58-3030F ........................1-7/8 x 1-7/8
90 deg Elbow F/MBSPT x JIC
P/Number ................................... ThreadCB58-0407F.......................... 1/4 x 7/16CB58-0409F.......................... 1/4 x 9/16CB58-0609F.......................... 3/8 x 9/16CB58-0612F............................ 3/8 x 3/4CB58-0614F............................ 3/8 x 7/8CB58-0812F............................ 1/2 x 3/4CB58-0814F............................ 1/2 x 7/8CB58-1217F.......................3/4 x 1-1/16CB58-1621F..........................1 x 1-5/16
90 deg Elbow F/MNPTF x JIC
P/Number ................................... Thread* CN58-0207F.......................... 1/8 x 7/16
CN58-0407F.......................... 1/4 x 7/16CN58-0409F.......................... 1/4 x 9/16
* CN58-0612.............................. 3/8 x 3/4CN58-0812F............................ 1/2 x 3/4
* CN58-1217.........................3/4 x 1-1/16* CN58-1621............................1 x 1-5/16
90 deg Elbow M/MS.A.E. ‘O’ Ring Boss
x JIC
P/Number ...................................ThreadC59-0707F...........................7/16 x 7/16C59-0708F.............................7/16 x 1/2C59-0709F...........................7/16 x 9/16C59-0712 ...............................7/16 x 3/4C59-0807F.............................1/2 x 7/16C59-0808F...............................1/2 x 1/2C59-0809F.............................1/2 x 9/16C59-0907F...........................9/16 x 7/16C59-0908F.............................9/16 x 1/2C59-0909F...........................9/16 x 9/16C59-0912F.............................9/16 x 3/4C59-1207F.............................3/4 x 7/16C59-1208F...............................3/4 x 1/2C59-1209F.............................3/4 x 9/16C59-1212F...............................3/4 x 3/4C59-1214F...............................3/4 x 7/8C59-1217F..........................3/4 x 1-1/16C59-1221 ............................3/4 x 1-5/16C59-1409F.............................7/8 x 9/16C59-1412F...............................7/8 x 3/4C59-1414F...............................7/8 x 7/8C59-1417F..........................7/8 x 1-1/16C59-1421F..........................7/8 x 1-5/16C59-1709F........................1-1/16 x 9/16C59-1712F..........................1-1/16 x 3/4C59-1714F..........................1-1/16 x 7/8C59-1717F.................... 1-1/16 x 1-1/16C59-1721F.................... 1-1/16 x 1-5/16C59-2117F.................... 1-5/16 x 1-1/16C59-2121F.................... 1-5/16 x 1-5/16C59-2126F...................... 1-5/16 x 1-5/8C59-2621F...................... 1-5/8 x 1-5/16C59-2626F........................ 1-5/8 x 1-5/8C59-2630 .......................... 1-5/8 x 1-7/8C59-3021F...................... 1-7/8 x 1-5/16C59-3026 .......................... 1-7/8 x 1-5/8C59-3030 .......................... 1-7/8 x 1-7/8C59-4040 .......................... 2-1/2 x 2-1/2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.27
*Manufactured To Order (minimum qtys may apply)
90 deg Elbow M/MS.A.E. ‘O’ Ring Boss
x ORFS
P/Number ................................... ThreadF59-0709F........................... 7/16 x 9/16F59-0909F........................... 9/16 x 9/16F59-0911F......................... 9/16 x 11/16F59-1211F........................... 3/4 x 11/16F59-1213F........................... 3/4 x 13/16F59-1416F.................................. 7/8 x 1F59-1719F.................... 1-1/16 x 1-3/16F59-2123F.................... 1-5/16 x 1-7/16
90 deg Elbow M/MS.A.E. ‘O’ Ring Boss Swivel
x JIC
P/Number ................................... ThreadCS59-1212 .............................. 3/4 x 3/4CS59-1214 .............................. 3/4 x 7/8CS59-1412 .............................. 7/8 x 3/4CS59-1414 .............................. 7/8 x 7/8
* CS59-1417 .........................7/8 x 1-1/16CS59-1717 ................... 1-1/16 x 1-1/16
90 deg Elbow M/MS.A.E. ‘O’ Ring Boss Ext.
x JIC
P/Number ................................... ThreadCE59-0909 .......................... 9/16 x 9/16CE59-0912 ............................ 9/16 x 3/4CE59-1209 ............................ 3/4 x 9/16CE59-1212 .............................. 3/4 x 3/4CE59-1214 .............................. 3/4 x 7/8CE59-1409 ............................ 7/8 x 9/16CE59-1412 .............................. 7/8 x 3/4CE59-1414 .............................. 7/8 x 7/8CE59-1417 .........................7/8 x 1-1/16CE59-1717 ................... 1-1/16 x 1-1/16
90 deg Elbow M/MS.A.E. ‘O’ Ring Boss
Ext. Swivel x JIC
P/Number....................................ThreadCES59-1212 ............................3/4 x 3/4
* CES59-1214 ............................3/4 x 7/8CES59-1412 ............................7/8 x 3/4
* CES59-1414 ............................7/8 x 7/8
90 deg Elbow M/MSAE O-Ring Boss x JIC
Orifice Elbow 0.9mm
P/Number....................................ThreadZC59-0909...........................9/16 x 9/16
90 deg Elbow M/MS.A.E. ‘O’ Ring Boss
x BSPT
P/Number....................................ThreadCB59-0704F ..........................7/16 x 1/4CB59-0904F ..........................9/16 x 1/4CB59-0906F ..........................9/16 x 3/8CB59-1204F ............................3/4 x 1/4CB59-1206F ............................3/4 x 3/8CB59-1208F ............................3/4 x 1/2CB59-1212F ............................3/4 x 3/4CB59-1404F ............................7/8 x 1/4CB59-1406F ............................7/8 x 3/8CB59-1408F ............................7/8 x 1/2CB59-1412F ............................7/8 x 3/4CB59-1708F ...................... 1-1/16 x 1/2CB59-1712F ...................... 1-1/16 x 3/4CB59-1716 ............................1-1/16 x 1CB59-2112F ...................... 1-5/16 x 3/4CB59-2116F ..........................1-5/16 x 1
90 deg Elbow M/MS.A.E. ‘O’ Ring Boss
x NPTF
P/Number................................... ThreadCN59-0904 ............................9/16 x 1/4CN59-0906 ............................9/16 x 3/8CN59-1206 ..............................3/4 x 3/8
* CN59-1208 ..............................3/4 x 1/2* CN59-1212 ..............................3/4 x 3/4* CN59-1408 ..............................7/8 x 1/2
CN59-1412 ..............................7/8 x 3/4
Clamp-on 90 deg Elbow M/MS.A.E. ‘O’ Ring Boss x Tail
P/Number................Thread ...........Hose* C60-0905 ................9/16 ................5/16* C60-0906 ................9/16 ..................3/8* C60-0908 ................9/16 ..................1/2
C60-1208 ................3/4 ....................1/2* C60-1210 ................3/4 ....................5/8
C60-1212 ................3/4 ....................3/4C60-1412 ................7/8 ...................3/4
* C60-1416 ................7/8 .......................1C60-1420 ................7/8 ................ 1-1/4
* C60-1710 ................1-1/16...............5/8C60-1712 ................1-1/16 ..............3/4C60-1716 ................1-1/16 .................1C60-1720 ................1-1/16 .......... 1-1/4
* C60-1724 ................1-1/16........... 1-1/2C60-2112 ................1-5/16...............3/4C60-2116 ................1-5/16..................1C60-2120 ................1-5/16........... 1-1/4C60-2124 ................1-5/16........... 1-1/2C60-2620 ................1-5/8............. 1-1/4C60-2624 ................1-5/8............. 1-1/2C60-3024 ................1-7/8............. 1-1/2
4.28 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Clamp-on 90 deg Elbow M/MBSPT x Tail
P/Number................Thread ...........HoseCB60-0204..............1/8 ....................1/4
* CB60-0404..............1/4 ....................1/4* CB60-0405..............1/4 ..................5/16
CB60-0406..............1/4 ....................3/8* CB60-0606..............3/8 ....................3/8* CB60-0608..............3/8 ....................1/2
CB60-0610..............3/8 ....................5/8CB60-0612..............3/8 ....................3/4CB60-0806..............1/2 ....................3/8CB60-0808..............1/2 ....................1/2
* CB60-0810..............1/2 ....................5/8CB60-0812..............1/2 ....................3/4
* CB60-1208..............3/4 ....................1/2CB60-1212..............3/4 ....................3/4CB60-1216..............3/4 .......................1CB60-1220..............3/4 ................ 1-1/4CB60-1612..............1 .......................3/4CB60-1616..............1 ..........................1CB60-1620..............1 ................... 1-1/4CB60-1624..............1 ................... 1-1/2
* CB60-2012..............1-1/4.................3/4CB60-2016..............1-1/4....................1CB60-2020..............1-1/4............. 1-1/4CB60-2024..............1-1/4............. 1-1/2CB60-2032..............1-1/4....................2CB60-2420..............1-1/2............. 1-1/4CB60-2424..............1-1/2............. 1-1/2CB60-2432..............1-1/2....................2CB60-3232..............2 ..........................2
Clamp-on 90 deg Elbow M/MBSPP x Tail
P/Number................Thread ...........HoseCP60-0608 ..............3/8 ....................1/2CP60-0612 ..............3/8 ....................1/2CP60-0812 ..............1/2 ................... 3/4CP60-0816 ..............1/2 ...................... 1CP60-1212 ..............3/4 ....................3/4CP60-1216 ..............3/4 .......................1CP60-1220 ..............3/4 ................ 1-1/4CP60-1612 ..............1 .......................3/4CP60-1616 ..............1 ..........................1CP60-1620 ..............1 ................... 1-1/4CP60-1624 ..............1 ................... 1-1/2CP60-1632 ..............1 ..........................2CP60-2016 ..............1-1/4....................1CP60-2020 ..............1-1/4............. 1-1/4CP60-2024 ..............1-1/4............. 1-1/2CP60-2032 ..............1-1/4....................2CP60-2424 ..............1-1/2............. 1-1/2CP60-2432 ..............1-1/2 ...................2
Clamp-on 90 deg Elbow M/MNPTF x Tail
P/Number ............... Thread .......... HoseCN60-0404............. 1/4.................... 1/4CN60-0406............. 1/4.................... 3/8
* CN60-0408............. 1/4.................... 1/2CN60-0410............. 1/4.................... 5/8CN60-0606............. 3/8.................... 3/8CN60-0608............. 3/8.................... 1/2
* CN60-0610............. 3/8.................... 5/8CN60-0612............. 3/8.................... 3/4
* CN60-0808............. 1/2.................... 1/2CN60-0812............. 1/2................... 3/4
* CN60-1212............. 3/4.................... 3/4CN60-1216............. 3/4................ 113/4CN60-1616............. 1.......................... 1
* CN60-1620............. 1.................... 1-1/4* CN60-1624............. 1.................... 1-1/2
CN60-2020............. 1-1/4 ............. 1-1/4CN60-2024............. 1-1/4 ............. 1-1/2CN60-2424............. 1-1/2 ............. 1-1/2
* CN60-2432............. 1-1/2 ................... 2
90 deg Elbow M/MJIC x JIC Bulkhead
P/Number ................................... ThreadC61-0707............................. 7/16 x 7/16
* C61-0808................................. 1/2 x 1/2C61-0909............................. 9/16 x 9/16C61-1212................................. 3/4 x 3/4C61-1414................................. 7/8 x 7/8C61-1717.......................1-1/16 x 1-1/16C61-2121.......................1-5/16 x 1-5/16C61-2626...........................1-5/8 x 1-5/8C61-3030...........................1-7/8 x 1-7/8
90 deg Elbow M/MSAE x SAE Bulkhead
P/Number ...................................ThreadCA61-1010 ..............................5/8 x 5/8CA61-1212 ..............................3/4 x 3/4CA61-1414 ..............................7/8 x 7/8
Tee M/M/FBSPT x BSPT x BSPP
P/Number ...................................ThreadCB61-040404F ...............1/4 x 1/4 x 1/4CB61-060606F ...............3/8 x 3/8 x 3/8CB61-080808F ...............1/2 x 1/2 x 1/2CB61-121212F ...............3/4 x 3/4 x 3/4CB61-161616F ........................ 1 x 1 x 1
Tee M/M/FORFS x ORFS x ORFS
P/Number ...................................Thread* F61-090909F ............9/16 x 9/16 x 9/16* F61-111111F ......11/16 x 11/16 x 11/16* F61-131313F ......13/16 x 13/16 x 13/16* F61-161616F ........................... 1 x 1 x 1* F61-191919F ..1-3/16 x 1-3/16 x 1-3/16
Tee M/M/MBSPT x BSPT x BSPT
P/Number ...................................ThreadCB62-020202F ...............1/8 x 1/8 x 1/8CB62-040404F ...............1/4 x 1/4 x 1/4CB62-060606F ...............3/8 x 3/8 x 3/8CB62-080808F ...............1/2 x 1/2 x 1/2CB62-121208F ............. 3/4 X 3/4 X 1/2CB62-121212F ...............3/4 x 3/4 x 3/4CB62-161616F ........................ 1 x 1 x 1CB62-202020 .......1-1/4 x 1-1/4 x 1-1/4CB62-242424 .......1-1/2 x 1-1/2 x 1-1/2CB62-323232 .......................... 2 x 2 x 2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.29
*Manufactured To Order (minimum qtys may apply)
Tee M/M/MNPTF x NPTF x NPTF
P/Number ................................... ThreadCN62-020202................. 1/8 x 1/8 x 1/8CN62-040404F............... 1/4 x 1/4 x 1/4CN62-060606F............... 3/8 x 3/8 x 3.8CN62-080808F............... 1/2 x 1/2 x 1/2CN62-121212F............... 3/4 x 3/4 x 3/4
* CN62-161616.......................... 1 x 1 x 1
Tee M/M/MBSPP x BSPP x JIC
P/Number ................................... Thread* ZCP62-080814 ............... 1/2 x 1/2 x 7/8
Tee M/M/MJIC x JIC x JIC
P/Number ................................... ThreadC63-070707F ........... 7/16 x 7/16 x 7/16C63-080808F ................. 1/2 x 1/2 x 1/2C63-090909F ........... 9/16 x 9/16 x 9/16C63-121209F ............. 3/4 X 3/4 X 9/16C63-120912F ............... 3/4 x 9/16 x 3/4C63-121212F ................. 3/4 x 3/4 x 3/4C63-121214F ................. 3/4 x 3/4 x 7/8C63-121217F ............3/4 x 3/4 x 1-1/16C63-141214F ................. 7/8 x 3/4 x 7/8
* C63-141412F ................. 7/8 x 3/4 x 7/8C63-141414F ................. 7/8 x 7/8 x 7/8C63-141417F ............7/8 x 7/8 x 1-1/16C63-171414F ............1-1/16 x 7/8 x 7/8C63-171417......... 1-1/16 x 7/8 x 1-1/16C63-171712F ...... 1-1/16 x 1-1/16 x 3/4C63-171714F ...... 1-1/16 x 1-1/16 x 7/8C63-171717F . 1-1/16 x 1-1/16 x 1-1/16C63-212114F ...... 1-5/16 x 1-5/16 x 7/8C63-212117F . 1-5/16 x 1-5/16 x 1-1/16C63-212121F . 1-5/16 x 1-5/16 x 1-5/16C63-262626F ....... 1-5/8 x 1-5/8 x 1-5/8C63-303030.......... 1-7/8 x 1-7/8 x 1-7/8C63-404040.......... 2-1/2 x 2-1/2 x 2-1/2
Tee M/M/MORFS x ORFS x ORFS
P/Number....................................ThreadF63-090909F ............9/16 x 9/16 x 9/16F63-111111F ......11/16 x 11/16 x 11/16F63-131313F ......13/16 x 13/16 x 13/16F63-161616F ........................... 1 x 1 x 1F63-191919F ..1-3/16 x 1-3/16 x 1-3/16F63-232323 ....1-7/16 x 1-7/16 x 1-7/16
Tee F/F/FBSPT x BSPT x BSPT
P/Number....................................ThreadCB63-020202F ...............1/8 x 1/8 x 1/8CB63-040404F ...............1/4 x 1/4 x 1/4CB63-060606F ...............3/8 x 3/8 x 3/8CB63-080808F ...............1/2 x 1/2 x 1/2CB63-121212F ...............3/4 x 3/4 x 3/4CB63-161616 .......................... 1 x 1 x 1CB63-202020 .......1-1/4 x 1-1/4 x 1-1/4CB63-242424 .......1-1/2 x 1-1/2 x 1-1/2CB63-323232 .......................... 2 x 2 x 2
Tee F/F/FNPTF x NPTF x NPTF
P/Number....................................ThreadCN63-020202F...............1/8 x 1/8 x 1/8CN63-040404F...............1/4 x 1/4 x 1/4CN63-060606F...............3/8 x 3/8 x 3/8CN63-080808F...............1/2 x 1/2 x 1/2CN63-121212F...............3/4 x 3/4 x 3/4CN63-161616 .......................... 1 x 1 x 1CN63-202020 .......1-1/4 x 1-1/4 x 1-1/4CN63-242424 .......1-1/2 x 1-1/2 x 1-1/2CN63-323232 .......................... 2 x 2 x 2
Tee F/M/MJIC x JIC x JIC
P/Number................................... ThreadC64-070707F ........... 7/16 x 7/16 x 7/16C64-080808F ................. 1/2 x 1/2 x 1/2C64-090909F ........... 9/16 x 9/16 x 9/16C64-121212F ................. 3/4 x 3/4 x 3/4C64-141414F ................. 7/8 x 7/8 x 7/8C64-171717F . 1-1/16 x 1-1/16 x 1-1/16C64-172117F . 1-1/16 x 1-5/16 x 1-1/16C64-212117F . 1-5/16 x 1-5/16 x 1-1/16C64-212121F ... 1-5/16 x 1-5/16 x 1-5/1C64-262626 ......... 1-5/8 x 1-5/8 x 1-5/8C64-303030 ......... 1-7/8 x 1-7/8 x 1-7/8C64-404040 ......... 2-1/2 x 2-1/2 x 2-1/2
Tee F/M/MORFS x ORFS x ORFS
P/Number................................... ThreadF64-090909F............ 9/16 x 9/16 x 9/16F64-111111F...... 11/16 x 11/16 x 11/16F64-131313F...... 13/16 x 13/16 x 13/16F64-161616F............................1 x 1 x 1F64-191919F.. 1-3/16 x 1-3/16 x 1-3/16F64-232323.... 1-7/16 x 1-7/16 x 1-7/16
Tee M/F/FBSPT x BSPT x BSPT
P/Number................................... ThreadCB64-020202F .............. 1/8 x 1/8 x 1/8CB64-040404F .............. 1/4 x 1/4 x 1/4CB64-060606F .............. 3/8 x 3/8 x 3/8CB64-080808F .............. 1/2 x 1/2 x 1/2CB64-121212F .............. 3/4 x 3/4 x 3/4CB64-161616...........................1 x 1 x 1CB64-202020....... 1-1/4 x 1-1/4 x 1-1/4CB64-242424....... 1-1/2 x 1-1/2 x 1-1/2
4.30 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Tee M/F/FNPTF x NPTF x NPTF
P/Number................................... ThreadCN64-020202F .............. 1/8 x 1/8 x 1/8CN64-040404F .............. 1/4 x 1/4 x 1/4CN64-060606F .............. 3/8 x 3/8 x 3/8CN64-080808F .............. 1/2 x 1/2 x 1/2CN64-121212F .............. 3/4 x 3/4 x 3/4CN64-161616 ..........................1 x 1 x 1CN64-202020 ...... 1-1/4 x 1-1/4 x 1-1/4
Tee M/M/FJIC x JIC x JIC
P/Number................................... ThreadC65-070707F ........... 7/16 x 7/16 x 7/16
* C65-080808 ................... 1/2 x 1/2 x 1/2C65-090909F ........... 9/16 x 9/16 x 9/16C65-121212F ................. 3/4 x 3/4 x 3/4C65-141414F ................. 7/8 x 7/8 x 7/8C65-171717F . 1-1/16 x 1-1/16 x 1-1/16C65-212121F . 1-5/16 x 1-5/16 x 1-5/16C65-262626 ......... 1-5/8 x 1-5/8 x 1-5/8C65-303030 ......... 1-7/8 x 1-7/8 x 1-7/8C65-404040 ......... 2-1/2 x 2-1/2 x 2-1/2
Tee M/M/MJIC x JIC x BSPT
P/Number ................................... ThreadCB65-070702F........... 7/16 x 7/16 x 1/8CB65-070704F........... 7/16 x 7/16 x 1/4CB65-090904F........... 9/16 x 9/16 x 1/4CB65-090906F........... 9/16 x 9/16 x 3/8CB65-121204F............... 3/4 x 3/4 x 1/4CB65-121206F............... 3/4 x 3/4 x 3/8CB65-121208F............... 3/4 x 3/4 x 1/2CB65-121212F............... 3/4 x 3/4 x 3/4CB65-141406F............... 7/8 x 7/8 x 3/8CB65-141408F............... 7/8 x 7/8 x 1/2CB65-141412F............... 7/8 x 7/8 x 3/4CB65-171712F.... 1-1/16 x 1-1/16 x 3/4CB65-212116F........1-5/16 x 1-5/16 x 1CB65-262620 ....... 1-5/8 x 1-5/8 x 1-1/4CB65-303024 ....... 1-7/8 x 1-7/8 x 1-1/2
Tee M/M/MJIC x JIC x BSPP
P/Number ................................... ThreadCP65-070704F ........... 9/16 x 9/16 x 1/4CP65-090904F ........... 9/16 x 9/16 x 1/4CP65-090906F ........... 9/16 x 9/16 x 3/8CP65-090908F ........... 9/16 x 9/16 x 1/2CP65-121206F ............... 3/4 x 3/4 x 3/8CP65-121208F ............... 3/4 x 3/4 x 1/2CP65-141408F ............... 7/8 x 7/8 x 1/2CP65-141412F ............... 7/8 x 7/8 x 3/4CP65-171712F .... 1-1/16 x 1-1/16 x 3/4CP65-212116F ........1-5/16 x 1-5/16 x 1
Tee M/M/MBSPT X BSPP X BSPT
P/Number ................................... Thread* CBP65-040404F............. 1/4 x 1/4 x 1/4* CBP65-121212F............. 3/4 x 3/4 x 3/4
Tee M/M/MJIC x JIC x NPTF
P/Number ...................................ThreadCN65-070702F...........7/16 x 7/16 x 1/8CN65-070704F...........7/16 x 7/16 x 1/4CN65-080804 .................1/2 x 1/2 x 1/4CN65-090904F...........9/16 x 9/16 x 1/4CN65-090906F...........9/16 x 9/16 x 3/8CN65-121206F...............3/4 x 3/4 x 3/8CN65-121208F...............3/4 x 3/4 x 1/2CN65-141408F...............7/8 x 7/8 x 1/2CN65-141412F...............7/8 x 7/8 x 3/4CN65-171708F.... 1-1/16 x 1-1/16 x 1/2
* CN65-171712 ...... 1-1/16 x 1-1/16 x 3/4CN65-212116 ......... 1-5/16 x 1-5/16 x 1
Tee F/F/MBSPP x BSPP x BSPT
P/Number ...................................ThreadCBS66-040404 ...............1/4 x 1/4 x 1/4CBS66-060606 ...............3/8 x 3/8 x 3/8CBS66-080808 ...............1/2 x 1/2 x 1/2
Tee F/F/MNPTF x NPTF x NPTF
P/Number ...................................ThreadCN66-020202F...............1/8 x 1/8 x 1/8CN66-040404F...............1/4 x 1/4 x 1/4CN66-060606F...............3/8 x 3/8 x 3/8CN66-080808F...............1/2 x 1/2 x 1/2CN66-121212F...............3/4 x 3/4 x 3/4
* CN66-161616 .......................... 1 x 1 x 1* CN66-202020 .......1-1/4 x 1-1/4 x 1-1/4
Tee M/M/MJIC x BSPT x JIC
P/Number ...................................ThreadCB67-070207F ...........7/16 x 1/8 x 7/16CB67-070407F ...........7/16 x 1/4 x 7/16CB67-090409F ...........9/16 x 1/4 x 9/16CB67-090609F ...........9/16 x 3/8 x 9/16CB67-120612F ...............3/4 x 3/8 x 3/4CB67-120812F ...............3/4 x 1/2 x 3/4CB67-140814F ...............7/8 x 1/2 x 7/8CB67-171217F .... 1-1/16 x 3/4 x 1-1/16CB67-211621F ....... 1-5/16 x 1 x 1-5/16
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.31
*Manufactured To Order (minimum qtys may apply)
Tee M/M/MJIC x BSPP x JIC
P/Number ................................... ThreadCP67-070407F ........... 7/16 x 1/4 x 7/16CP67-090409F ........... 9/16 x 1/4 x 9/16CP67-090609F ........... 9/16 x 3/8 x 9/16CP67-120612F ............... 3/4 x 3/8 x 3/4CP67-120812F ............... 3/4 x 1/2 x 3/4CP67-140814F ............... 7/8 x 1/2 x 7/8
* CP67-170817 ...... 1-1/16 x 1/2 x 1-1/16CP67-171217F .... 1-1/16 x 3/4 x 1-1/16CP67-211621F ....... 1-5/16 x 1 x 1-5/16
* CP67-262026 ....... 1-5/8 x 1-1/4 x 1-5/8* CP67-262426 ....... 1-5/8 x 1-1/2 x 1-5/8* CP67-302430 ....... 1-7/8 x 1-1/2 x 1-7/8
Tee M/M/MJIC x NPT x JIC
P/Number ................................... ThreadCN67-070207F........... 7/16 x 1/8 x 7/16
* CN67-070407............. 7/16 x 1/4 x 7/16CN67-080208................. 1/2 x 1/8 x 1/2CN67-080408................. 1/2 x 1/4 x 1/2CN67-090409F........... 9/16 x 1/4 x 9/16
* CN67-090609F........... 9/16 x 3/8 x 9/16CN67-120612F............... 3/4 x 3/8 x 3/4CN67-120812F............... 3/4 x 1/2 x 3/4CN67-140814F............... 7/8 x 1/2 x 7/8CN67-171217F.... 1-1/16 x 3/4 x 1-1/16CN67-211621F....... 1-5/16 x 1 x 1-5/16
Tee M/M/MJIC x JIC x
S.A.E. ‘O’ Ring Boss
P/Number ................................... ThreadC68-070707F ........... 7/16 x 7/16 x 7/16C68-090907F ........... 9/16 x 9/16 x 7/16C68-090909F ........... 9/16 x 9/16 x 9/16C68-090912F ............. 9/16 x 9/16 x 3/4C68-121209F ............... 3/4 x 3/4 x 9/16C68-121212F ................. 3/4 x 3/4 x 3/4C68-141214.................... 7/8 x 3/4 x 7/8C68-141412F ................. 7/8 x 7/8 x 3/4C68-141414F ................. 7/8 x 7/8 x 7/8C68-171717F ... 1-1/16 x 1-1/16 x 1-1/6
* C68-212117.... 1-5/16 x 1-5/16 x 1-1/16C68-212121.... 1-5/16 x 1-5/16 x 1-5/16
* C68-262626.......... 1-5/8 x 1-5/8 x 1-5/8
Tee M/M/MS.A.E. ‘O’ Ring Boss
x JIC x JIC
P/Number....................................ThreadC69-070707F............7/16 x 7/16 x 7/16C69-080808F..................1/2 x 1/2 x 1/2C69-090909F............9/16 x 9/16 x 9/16C69-120909F..............3/4 x 9/16 x 9/16C69-121212F..................3/4 x 3/4 x 3/4C69-141212F..................7/8 x 3/4 x 3/4C69-141414F..................7/8 x 7/8 x 7/8C69-141717F....... 7/8 x 1-1/16 x 1-1/16C69-171414F............ 1-1/16 x 7/8 x 7/8C69-171712 ....1-1/16 x 1-1/16 x 1-1/16C69-171717F..1-1/16 x 1-1/16 x 1-1/16
* C69-211717 ....1-5/16 x 1-1/16 x 1-1/16C69-212121F..1-5/16 x 1-5/16 x 1-5/16
Tee F/M/MBSPP x BSPT x BSPT
P/Number....................................ThreadCB69-040404F ...............1/4 x 1/4 x 1/4CB69-060606F ...............3/8 x 3/8 x 3/8CB69-080808F ...............1/2 x 1/2 x 1/2CB69-121204F ...............3/4 x 3/4 x 1/4CB69-121212F ...............3/4 x 3/4 x 3/4CB69-161616F ........................ 1 x 1 x 1CB69-202020 .......1-1/4 x 1-1/4 x 1-1/4
Tee M/M/MJIC x JIC x JIC Bulkhead
P/Number................................... ThreadC70-070707 ............. 7/16 x 7/16 x 7/16C70-090909 ............. 9/16 x 9/16 x 9/16C70-121212 ................... 3/4 x 3/4 x 3/4C70-141414 ................... 7/8 x 7/8 x 7/8C70-171717 ... 1-1/16 x 1-1/16 x 1-1/16C70-212121 ... 1-5/16 x 1-5/16 x 1-5/16
* C70-262626 ......... 1-5/8 x 1-5/8 x 1-5/8
Tee M/M/MJIC x JIC Bulkhead x JIC
P/Number................................... ThreadC71-070707 ............. 7/16 x 7/16 x 7/16C71-090909 ............. 9/16 x 9/16 x 9/16C71-121212 ................... 3/4 x 3/4 x 3/4C71-141414 ................... 7/8 x 7/8 x 7/8C71-171717 ... 1-1/16 x 1-1/16 x 1-1/16C71-212121 ... 1-5/16 x 1-5/16 x 1-5/16
* C71-262626 ......... 1-5/8 x 1-5/8 x 1-5/8
Tee M/M/MJIC x JIC Bulkhead x BSPP
P/Number................................... ThreadZCP71-090904........... 9/16 x 9/16 x 1/4
4.32 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Cross M/M/M/M4 x JIC
P/Number................................... ThreadC72-07X4 .......................................7/16C72-09X4 .......................................9/16C72-12X4 .........................................3/4C72-14X4 .........................................7/8C72-17X4 ................................... 1-1/16
* C72-21X4 ................................... 1-5/16
Cross M/M/M/M4 x ORFX
P/Number................................... ThreadF72-11X4......................................11/16
Cross F/F/F/F4 x BSPT
P/Number................................... ThreadCB72-04X4.......................................1/4CB72-06X4.......................................3/8CB72-08X4.......................................1/2CB72-12X4.......................................3/4CB72-16X4..........................................1
Cross F/F/F/F4 x NPTF
P/Number................................... Thread* CN72-02X4.......................................1/8
CN72-04X4.......................................1/4CN72-06X4.......................................3/8CN72-08X4.......................................1/2
* CN72-12X4.......................................3/4* CN72-16X4..........................................1
Reducing Bush M/FBSPT x BSPT
P/Number ................................... ThreadCB73-0402 .............................. 1/4 x 1/8CB73-0602 .............................. 3/8 x 1/8CB73-0604 .............................. 3/8 x 1/4CB73-0802 .............................. 1/2 x 1/8CB73-0804 .............................. 1/2 x 1/4CB73-0806 .............................. 1/2 x 3/8CB73-1204 .............................. 3/4 x 1/4CB73-1206 .............................. 3/4 x 3/8CB73-1208 .............................. 3/4 x 1/2CB73-1606 ................................. 1 x 3/8CB73-1608 ................................. 1 x 1/2CB73-1612 ................................. 1 x 3/4CB73-2008 ...........................1-1/4 x 1/2CB73-2012 ...........................1-1/4 x 3/4CB73-2016 .............................. 1-1/4 x 1CB73-2412 ...........................1-1/2 x 3/4CB73-2416 .............................. 1-1/2 x 1CB73-2420 ........................1-1/2 x 1-1/4CB73-3216 .................................... 2 x 1CB73-3220 .............................. 2 x 1-1/4CB73-3224 .............................. 2 x 1-1/2
Reducing Bush M/FBSPP x BSPP
Encapsulated Seal
P/Number ................................... ThreadCR73-0604 .............................. 3/8 x 1/4CR73-1608 ................................. 1 x 1/2CR73-1612 ................................. 1 x 3/4CR73-2016 .............................. 1-1/4 x 1CR73-2416 .............................. 1-1/2 x 1CR73-2420 ........................1-1/2 x 1-1/4
Reducing Bush M/FBSPP x BSPP
Style A
P/Number .....................Thread1/4 x 1/8CP73-0602...............................3/8 x 1/8CP73-0604...............................3/8 x 1/4CP73-0804...............................1/2 x 1/4CP73-0806...............................1/2 x 3/8CP73-1206...............................3/4 x 3/8CP73-1208...............................3/4 x 1/2CP73-1612.................................. 1 x 3/4CP73-2016...............................1-1/4 x 1CP73-2416...............................1-1/2 x 1CP73-2420........................ 1-1/2 x 1-1/4CP73-3224...............................2 x 1-1/2
Reducing Bush M/FBSPP x BSPP
Style B
P/Number ...................................ThreadCP73-1204...............................3/4 x 1/4CP73-1608.................................. 1 x 1/2CP73-2012............................1-1/4 x 3/4
* CP73-3212.................................. 2 x 3/4* CP73-3216..................................... 2 x 1
CP73-3220...............................2 x 1-1/4
Reducing Bush M/FBSPP x BSPT
Style A
P/Number ...................................ThreadCPB73-2420 ..................... 1-1/2 x 1-1/4
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.33
*Manufactured To Order (minimum qtys may apply)
Reducing Bush M/FBSPP x BSPT
Style B
P/Number ................................... Thread* CPB73-0804............................ 1/2 x 1/4* CPB73-1206............................ 3/4 x 3/8* CPB73-2012.........................1-1/4 x 3/4* CPB73-2412.........................1-1/2 x 3/4* CPB73-2416............................1-1/2 x 1* CPB73-2420..................... 1-1/2 x 1-1/4
Reducing Bush M/FNPTF x NPTF
P/Number ................................... ThreadCN73-0402.............................. 1/4 x 1/8CN73-0602.............................. 3/8 x 1/8CN73-0604.............................. 3/8 x 1/4CN73-0802.............................. 1/2 x 1/8CN73-0804.............................. 1/2 x 1/4CN73-0806.............................. 1/2 x 3/8CN73-1202.............................. 3/4 x 1/8CN73-1204.............................. 3/4 x 1/4CN73-1206.............................. 3/4 x 3/8CN73-1208.............................. 3/4 x 1/2
* CN73-1606................................. 1 x 3/8CN73-1608................................. 1 x 1/2CN73-1612................................. 1 x 3/4
* CN73-2008...........................1-1/4 x 1/2CN73-2012...........................1-1/4 x 3/4CN73-2016..............................1-1/4 x 1CN73-2412...........................1-1/2 x 3/4CN73-2416..............................1-1/2 x 1CN73-2420....................... 1-1/2 x 1-1/4
* CN73-3212................................. 2 x 3/4CN73-3216.................................... 2 x 1CN73-3220..............................2 x 1-1/4CN73-3224..............................2 x 1-1/22-1/2 x 1-1/4
Reducing Bush M/FS.A.E. ‘O’ Ring Boss
x S.A.E. ‘O’ Ring Boss
P/Number....................................ThreadC74-0908 ...............................9/16 x 1/2C74-1209 ...............................3/4 x 9/16C74-1409 ...............................7/8 x 9/16C74-1709 ......................... 1-1/16 x 9/16C74-1712 ........................... 1-1/16 x 3/4C74-2112 ........................... 1-5/16 x 3/4C74-2114 ........................... 1-5/16 x 7/8C74-2117 ...................... 1-5/16 x 1-1/16
* C74-2612 ............................. 1-5/8 x 3/4C74-2617 ........................ 1-5/8 x 1-1/16C74-2621 ........................ 1-5/8 x 1-5/16C74-3017 ........................ 1-7/8 x 1-1/16
* C74-3021 ........................ 1-7/8 x 1-5/16
Reducing Bush M/FS.A.E. ‘O’ Ring Boss
x BSPT
P/Number....................................Thread* CB74-0902 ..............................3/4 x 1/8
CB74-1202 ..............................3/4 x 1/8CB74-1204 ..............................3/4 x 1/4CB74-1402 ..............................7/8 x 1/8CB74-1404 ..............................7/8 x 1/4
* CB74-1406 ..............................7/8 x 3/8CB74-1704 ........................ 1-1/16 x 1/4CB74-1706 ........................ 1-1/16 x 3/8
* CB74-1708 ........................ 1-1/16 x 1/2CB74-2104 ........................ 1-5/16 x 1/4CB74-2106 ........................ 1-5/16 x 3/8CB74-2108 ........................ 1-5/16 x 1/2CB74-2112 ........................ 1-5/16 x 3/4
* CB74-2612 .......................... 1-5/8 x 3/4* CB74-2616 ..............................1-5/8 x 1
Reducing Bush M/FS.A.E. ‘O’ Ring Boss
x NPTFStyle A
P/Number................................... Thread* CN74-1708 ........................ 1-1/16 x 1/2* CN74-2108 ........................ 1-5/16 x 1/2* CN74-2112 ........................ 1-5/16 x 3/4
Reducing Bush M/FS.A.E. ‘O’ Ring Boss
x NPTFStyle B
P/Number................................... Thread* CN74-1202 ..............................3/4 x 1/8
CN74-1204 ..............................3/4 x 1/4CN74-1402 ..............................7/8 x 1/8
* CN74-1404 ..............................7/8 x 1/4* CN74-1704 ........................ 1-1/16 x 1/4
CN74-1706 ........................ 1-1/16 x 3/8CN74-2108 ........................ 1-5/16 x 1/2
Plug S.A.E. ‘O’ Ring Boss
P/Number................................... ThreadC77-06 ..............................................3/8C77-07 ............................................7/16C77-08 ..............................................1/2C77-09 ............................................9/16C77-12 ..............................................3/4C77-14 ..............................................7/8C77-17 ........................................ 1-1/16C77-19 ........................................ 1-3/16C77-21 ........................................ 1-5/16C77-26 .......................................... 1-5/8C77-30 .......................................... 1-7/8C77-40 .......................................... 2-1/2
4.34 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Plug S.A.E. ‘O’ Ring BossSocket Head
P/Number................................... ThreadC77S-05 ..........................................5/16C77S-06 ............................................3/8C77S-07 ..........................................7/16C77S-08 ............................................1/2C77S-09 ..........................................9/16C77S-12 ............................................3/4C77S-14 ............................................7/8C77S-17 ...................................... 1-1/16
Plug BSPT
P/Number................................... ThreadCB77-02............................................1/8CB77-04............................................1/4CB77-06............................................3/8CB77-08............................................1/2CB77-12............................................3/4CB77-16...............................................1CB77-20........................................ 1-1/4CB77-24........................................ 1-1/2CB77-32...............................................2
* CB77-40........................................ 2-1/2
Plug BSPPEncapsulated Seal
P/Number................................... ThreadCR77-02............................................1/8CR77-04............................................1/4CR77-06............................................3/8CR77-08............................................1/2CR77-12............................................3/4CR77-16...............................................1CR77-20........................................ 1-1/4CR77-24........................................ 1-1/2
Plug BSPP
P/Number ................................... ThreadCP77-02 ........................................... 1/8CP77-04 ........................................... 1/4CP77-06 ........................................... 3/8CP77-08 ........................................... 1/2CP77-12 ........................................... 3/4CP77-16 .............................................. 1CP77-20 ........................................ 1-1/4CP77-24 ........................................ 1-1/2CP77-32 .............................................. 2
Plug BSPPSocket Head
P/Number ................................... ThreadCR77S-02......................................... 1/8CR77S-04......................................... 1/4CR77S-06......................................... 3/8CR77S-08......................................... 1/2CR77S-12......................................... 3/4CR77S-16............................................ 1
Plug NPTF
P/Number ................................... ThreadCN77-02........................................... 1/8CN77-04........................................... 1/4CN77-06........................................... 3/8CN77-08........................................... 1/2CN77-12........................................... 3/4CN77-16.............................................. 1CN77-20........................................ 1-1/4CN77-24........................................ 1-1/2CN77-32.............................................. 22-1/2
Plug Metric1.5mm Pitch
P/Number ................................... ThreadCM77-12 ........................................... 12CM77-14 ........................................... 14CM77-16 ........................................... 16CM77-18 ........................................... 18CM77-20 ........................................... 20CM77-22 ........................................... 22CM77-24 ........................................... 24
Plug JIC
P/Number ...................................ThreadC78-07 ............................................ 7/16C78-08 .............................................. 1/2C78-09 ............................................ 9/16C78-12 .............................................. 3/4C78-14 .............................................. 7/8C78-17 .........................................1-1/16C78-19 .........................................1-3/16C78-21 .........................................1-5/16C78-26 ...........................................1-5/8C78-30 ...........................................1-7/8C78-40 ...........................................2-1/2
Plug ORFS
P/Number ...................................ThreadF78-09 ............................................ 9/16F78-11 .......................................... 11/16F78-13 .......................................... 13/16F78-16 ................................................. 1F78-19 .........................................1-3/16F78-23 .........................................1-7/16F78-27 .......................................1-11/16
Plug Metric Komatsu1.5mm Pitch
P/Number ...................................ThreadCK78-12 ............................................ 12CK78-14 ............................................ 14CK78-16 ............................................ 16CK78-18 ............................................ 18CK78-20 ............................................ 20CK78-22 ............................................ 22CK78-24 ............................................ 12CK78-30 ............................................ 14CK78-33 ............................................ 16CK78-36 ............................................ 18CK78-42 ............................................ 24
Cap Nut JIC
P/Number ...................................ThreadC79-07 ............................................ 7/16C79-08 .............................................. 1/2C79-09 ............................................ 9/16C79-12 .............................................. 3/4C79-14 .............................................. 7/8C79-17 .........................................1-1/16C79-19 .........................................1-3/16C79-21 .........................................1-5/16C79-26 ...........................................1-5/8C79-30 ...........................................1-7/8C79-40 ...........................................2-1/2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.35
*Manufactured To Order (minimum qtys may apply)
Cap Nut BSPP
P/Number ................................... ThreadCBS79-02......................................... 1/8CBS79-04......................................... 1/4CBS79-06......................................... 3/8CBS79-08......................................... 1/2
* CBS79-10......................................... 5/8CBS79-12......................................... 3/4CBS79-16............................................ 1CBS79-20......................................1-1/4CBS79-24......................................1-1/2CBS79-32............................................ 2
Cap Nut ORFS
P/Number ................................... ThreadF79-09 ............................................ 9/16F79-11 .......................................... 11/16F79-13 .......................................... 13/16F79-16 ................................................. 1F79-19 .........................................1-3/16F79-23 .........................................1-7/16F79-27 .......................................1-11/16
Cap Nut Metric Komatsu1.5mm Pitch
P/Number ................................... ThreadCK79-12......................................... 9/16CK79-14....................................... 11/16CK79-16....................................... 13/16CK79-18.............................................. 1CK79-20......................................1-3/16CK79-22......................................1-7/16CK79-24.............................................. 1CK79-30......................................1-3/16CK79-33......................................1-7/16CK79-36....................................1-11/16CK79-42....................................1-11/16
Bulkhead Nut JIC
P/Number....................................ThreadC80-07 ............................................7/16C80-08 ..............................................1/2C80-09 ............................................9/16C80-12 ..............................................3/4C80-14 ..............................................7/8C80-17 .........................................1-1/16C80-19 .........................................1-3/16C80-21 .........................................1-5/16C80-26 ...........................................1-5/8C80-30 ...........................................1-7/8C80-40 ...........................................2-1/2
Bulkhead Nut BSPP
P/Number....................................ThreadCP80-02............................................1/8CP80-04............................................1/4CP80-06............................................3/8CP80-08............................................1/2CP80-12............................................3/4CP80-16............................................... 1CP80-20.........................................1-1/4CP80-24.........................................1-1/2CP80-32............................................... 2
Bulkhead Nut ORFS
P/Number....................................ThreadF80-11 ..........................................11/16F80-13 ..........................................13/16F80-16 ................................................. 1F80-19 .........................................1-3/16F80-23 .........................................1-7/16F80-27 .......................................1-11/16
Tube Nut & Sleeve AssemblyJIC
(Nut C83-**N. Sleeve C83-**S)
P/Number................(Tube) ....... ThreadC83-07 ....................(1/4)................7/16C83-08 ....................(5/16)................1/2C83-09 ....................(3/8)................9/16C83-12 ....................(1/2)..................3/4C83-14 ....................(5/8)..................7/8C83-17 ....................(3/4)............ 1-1/16C83-19 ....................(7/8)............ 1-3/16C83-21 ....................(1)............... 1-5/16C83-26 ....................(1-1/4) .......... 1-5/8C83-30 ....................(1-1/2) .......... 1-7/8
Tube NutJIC
P/Number................(Tube) ....... ThreadC83-07N .................(1/4)................7/16C83-08N .................(5/16)................1/2C83-09N .................(3/8)................9/16C83-12N .................(1/2)..................3/4C83-14N .................(5/8)..................7/8C83-17N .................(3/4)............ 1-1/16C83-19N .................(7/8)............ 1-3/16C83-21N .................(1)............... 1-5/16C83-26N .................(1-1/4) .......... 1-5/8C83-30N .................(1-1/2) .......... 1-7/8C83-40N .................(2)................. 2-1/2
Tube SleeveJIC
P/Number................(Tube) ....... ThreadC83-07S ..................(1/4)................7/16C83-08S ..................(5/16)................1/2C83-09S ..................(3/8)................9/16C83-12S ..................(1/2)..................3/4C83-14S ..................(5/8)..................7/8C83-17S ..................(3/4)............ 1-1/16C83-19S ..................(7/8)............ 1-3/16C83-21S ..................(1)............... 1-5/16C83-26S ..................(1-1/4) .......... 1-5/8C83-30S ..................(1-1/2) .......... 1-7/8C83-40S ..................(2)................. 2-1/2
4.36 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Tube Nut &Sleeve AssemblyORFS
(Nut =F83-**N, Sleeve =F83-**S)
P/Number................(Tube) ....... ThreadF83-09.....................(1/4)................9/16F83-11.....................(3/8)..............11/16F83-13.....................(1/2)..............13/16F83-16.....................(5/8).....................1F83-19.....................(3/4)............ 1-3/16F83-23.....................(1)............... 1-7/16F83-27.....................(1/1/4) ...... 1-11/16
Tube NutORFS
P/Number................(Tube) ....... ThreadF83-09N..................(1/4)................9/16F83-11N..................(3/8)..............11/16F83-13N..................(1/2)..............13/16F83-16N..................(5/8).....................1F83-19N..................(3/4)............ 1-3/16F83-23N..................(1)............... 1-7/16F83-27N..................(1/1/4) ...... 1-11/16
Tube SleeveORFS
P/Number................(Tube) ....... ThreadF83-09S...................(1/4)................9/16F83-11S...................(3/8)..............11/16F83-13S...................(1/2)..............13/16F83-16S...................(5/8).....................1F83-19S...................(3/4)............ 1-3/16F83-23S...................(1)............... 1-7/16
Tube Reducer AssemblyF/M JIC x JIC
Style A(Nut =C83-**N, Reducer =C84-****R)
P/Number ................................... ThreadC84-0907............................. 9/16 x 7/16C84-1209............................... 3/4 x 9/16C84-1409............................... 7/8 x 9/16C84-1707..........................1-1/16 x 7/16C84-1709..........................1-1/16 x 9/16C84-1712............................1-1/16 x 3/4C84-2112............................1-5/16 x 3/4C84-2114............................1-5/16 x 7/8C84-2117.......................1-5/16 x 1-1/16C84-2612..............................1-5/8 x 3/4C84-2617.........................1-5/8 x 1-1/16C84-2621.........................1-5/8 x 1-5/16C84-3021.........................1-7/8 x 1-5/16C84-3026...........................1-7/8 x 1-5/8C84-4030...........................2-1/2 x 1-7/8
Tube ReducerJIC x JIC
Style A(Nut =C83-**N)
P/Number ................................... ThreadC84-0907R.......................... 9/16 x 7/16C84-1207R............................ 3/4 x 7/16C84-1209R............................ 3/4 x 9/16C84-1409R............................ 7/8 x 9/16C84-1707R.......................1-1/16 x 7/16C84-1709R.......................1-1/16 x 9/16C84-1712R.........................1-1/16 x 3/4C84-2112R.........................1-5/16 x 3/4C84-2114R.........................1-5/16 x 7/8C84-2117R....................1-5/16 x 1-1/16C84-2612R...........................1-5/8 x 3/4C84-2617R......................1-5/8 x 1-1/16C84-2621R......................1-5/8 x 1-5/16
* C84-3017R......................1-7/8 x 1-1/16C84-3021R......................1-7/8 x 1-5/16
Tube Reducer FixedF/M JIC x JIC
Style B
P/Number ...................................ThreadC84-1207B ............................3/4 x 7/16C84-1412B ..............................7/8 x 3/4C84-1714B .........................1-1/16 x 7/8C84-3026B ....................... 1-7/8 x 1-5/8C84-4030B ....................... 2-1/2 x 1-7/8
Tube Reducer AssemblyF/M ORFS x ORFS
(Nut = F83-**N, Reducer = F84-****R)
P/Number ...................................ThreadF84-1109 ...........................11/16 x 9/16F84-1309 ...........................13/16 x 9/16F84-1311 .........................13/16 x 11/16F84-1613 ................................ 1 x 13/16F84-1913 ........................1-3/16 x 13/16
Tube Reducer F/MORFS x ORFS
(Nut F83-**N
P/Number ...................................Thread* F84-1109R.........................11/16 x 9/16
F84-1309R.........................13/16 x 9/16* F84-1311R.......................13/16 x 11/16
F84-1613R.............................. 1 x 13/16F84-1913R......................1-3/16 x 13/16
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.37
*Manufactured To Order (minimum qtys may apply)
Tubeweld NippleJIC Male
P/Number ............... Thread .......... TubeC86-0704................ 7/16.................. 1/4C86-0906................ 9/16.................. 3/8C86-0908................ 9/16.................. 1/2C86-1206................ 3/4.................... 3/8C86-1208................ 3/4.................... 1/2C86-1210................ 3/4.................... 5/8C86-1212................ 3/4.................... 3/4C86-1410................ 7/8.................... 5/8C86-1412................ 7/8.................... 3/4C86-1712................ 1-1/16 .............. 3/4C86-1714................ 1-1/16 .............. 7/8C86-1716................ 1-1/16 ................. 1C86-1720................ 1-1/16 ...........1-1/4
* C86-1914................ 1-3/16 .............. 7/8C86-2116................ 1-5/16 ................. 1C86-2120................ 1-5/16 ...........1-1/4C86-2124................ 1-5/16 ...........1-1/2C86-2620................ 1-5/8 .............1-1/4C86-2624................ 1-5/8 .............1-1/2C86-3024................ 1-7/8 .............1-1/2C86-4032................ 2-1/2 ................... 2
Tubeweld NippleORFS
P/Number ............... Thread .......... Tube* F86-0904 ................ 9/16.................. 1/4
F86-0906 ................ 9/16.................. 3/8* F86-1106 ................ 11/16................ 3/8* F86-1308 ................ 13/16................ 1/2* F86-1610 ................ 1....................... 5/8* F86-1912 ................ 1-3/16 .............. 3/4* F86-2316 ................ 1-7/16 ................. 1* F86-2720 ................ 1-11/16 .........1-1/4
Tubeweld NippleBSPT Male
P/Number................Thread...........TubeCB86-0404 ............. 1/4 ....................1/4CB86-0406 ............. 1/4 ....................3/8
* CB86-0604 ............. 3/8 ....................1/4CB86-0606 ............. 3/8 ....................3/8CB86-0608 ............. 3/8 ....................1/2CB86-0610 ............. 3/8 ....................5/8CB86-0806 ............. 1/2 ....................3/8CB86-0808 ............. 1/2 ....................1/2CB86-0810 ............. 1/2 ....................5/8CB86-0812 ............. 1/2 ....................3/4CB86-0816 ............. 1/2 ....................... 1CB86-1212 ............. 3/4 ....................3/4CB86-1216 ............. 3/4 ....................... 1
* CB86-1220 ............. 3/4 .................1-1/4CB86-1612 ............. 1 .......................3/4CB86-1616 ............. 1 .......................... 1CB86-1620 ............. 1 ....................1-1/4CB86-1624 ............. 1 ....................1-1/2CB86-2016 ............. 1-1/4.................... 1CB86-2020 ............. 1-1/4..............1-1/4CB86-2024 ............. 1-1/4..............1-1/2CB86-2420 ............. 1-1/2..............1-1/4CB86-2424 ............. 1-1/2..............1-1/2CB86-3232 ............. 2 ......................... 2
Tubeweld NippleNPTF Male
P/Number................Thread...........Tube* CN86-0406 ............. 1/4 ....................3/8
CN86-0606 ............. 3/8 ....................3/8* CN86-0608 ............. 3/8 ....................1/2
CN86-1212 ............. 3/4 ....................3/4
Tubeweld NippleBSPP Male
P/Number................Thread ...........TubeCP86-0406 ..............1/4 ....................3/8CP86-0608 ..............3/8 ....................1/2CP86-0810 ..............1/2 ....................5/8CP86-1216 ..............3/4 .......................1CP86-1620 ..............1 ................... 1-1/4CP86-2024 ..............1-1/4 ............ 1-1/2
Tubeweld UnionJIC Female
P/Number................Thread ...........TubeC87-0704 ................7/16 ..................1/4C87-0904 ................9/16 ..................1/4C87-0906 ................9/16 ..................3/8C87-1206 ................3/4 ....................3/8C87-1208 ................3/4 ....................1/2C87-1210 ................3/4 ....................5/8C87-1408 ................7/8 ....................1/2C87-1410 ................7/8 ....................5/8C87-1412 ................7/8 ....................3/4C87-1712 ................1-1/16...............3/4C87-1716 ................1-1/16..................1C87H-1716 ............. ............................1C87-2116 ................1-5/16..................1C87-2120 ................1-5/16........... 1-1/4C87-2620 ................1-5/8............. 1-1/4C87-2624 ................1-5/8............. 1-1/2C87-3024 ................1-7/8............. 1-1/2C87-4032 ................2-1/2....................2
4.38 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
Tubeweld UnionBSPP Female
P/Number................Thread ...........TubeCB87-0404..............1/4 ....................1/4CB87-0406..............1/4 ....................3/8CB87-0606..............3/8 ....................3/8CB87-0808..............1/2 ....................1/2CB87-0810..............1/2 ....................5/8CB87-0812..............1/2 ....................3/4CB87-1212..............3/4 ....................3/4CB87-1616..............1 ..........................1CB87-1620..............1 ................... 1-1/4CB87-2016..............1-1/4....................1CB87-2020..............1-1/4............. 1-1/4CB87-2424..............1-1/2............. 1-1/2
Tubeweld 90 deg ElbowJIC Male
P/Number................Thread ...........Tube* C88-0704 ................7/16 ..................1/4
C88-0906 ................9/16 ..................3/8C88-0908 ................9/16 ..................1/2
* C88-1206 ................3/4 ....................3/8- C88-1208 ................3/4 ....................1/2
C88-1210 ................3/4 ....................5/8* C88-1212 ................3/4 ....................3/4
C88-1410 ................7/8 ....................5/8* C88-1712 ................1-1/16...............3/4
C88-1714 ................1-1/16...............7/8C88-2116 ................1-5/16..................1
* C88-2120 ................1-5/16........... 1-1/4* C88-2620 ................1-5/8............. 1-1/4
Tubeweld FlangeSAE O’Ring
Code 61 (3000 psi)
P/Number ............... Flange........... TubeC92-0808................ 1/2.................... 1/2C92-0810................ 1/2................... 5/8C92-1208................ 3/4.................... 1/2
* C92-1210................ 3/4................... 5/8C92-1212................ 3/4.................... 3/4C92-1216................ 3/4....................... 1C92-1608................ 1....................... 1/2
* C92-1610................ 1....................... 5/8C92-1612................ 1....................... 3/4C92-1616................ 1.......................... 1C92-1620................ 1.................... 1-1/4C92-2012................ 1-1/4 ................ 3/4C92-2016................ 1-1/4 ................... 1C92-2020................ 1-1/4 ............. 1-1/4C92-2024................ 1-1/4 ............. 1-1/2C92-2416................ 1-1/2 ................... 1C92-2420................ 1-1/2 ............. 1-1/4C92-2424................ 1-1/2 ............. 1-1/2
* C92-2432................ 1-1/2 ................... 2C92-3220................ 2.................... 1-1/4C92-3224................ 2.................... 1-1/2C92-3232................ 2.......................... 2
* C92-4032................ 2-1/2 ................... 2C92-4040................ 2-1/2 ............. 2-1/290 Duro ‘O’ Ring supplied
Tubeweld FlangeSAE O’Ring
Code 62 (6000 psi)
P/Number ............... Flange........... TubeC92H-0808............. 1/2.................... 1/2C92H-0812............. 1/2.................... 3/4C92H-1212............. 3/4.................... 3/4
* C92H-1216............. 3/4....................... 1* C92H-1612............. 1....................... 3/4
C92H-1616............. 1.......................... 1C92H-1620............. 1.................... 1-1/4C92H-2016............. 1-1/4 ................... 1C92H-2020............. 1-1/4 ............. 1-1/4C92H-2024............. 1-1/4 ............. 1-1/2C92H-2420............. 1-1/2 ............. 1-1/4C92H-2424............. 1-1/2 ............. 1-1/2C92H-3224............. 2.................... 1-1/2C92H-3232............. 2.......................... 290 Duro ‘O’ Ring supplied
Short 90 deg. TubeJIC x JIC M/F
SAE 100R2 Working Pressure
P/Number ...................................ThreadC93-0707 .............................7/16 x 7/16C93-0808 .................................1/2 x 1/2C93-0909 .............................9/16 x 9/16C93-1212 .................................3/4 x 3/4C93-1414 .................................7/8 x 7/8C93-1717 ...................... 1-1/16 x 1-1/16C93-2121 ...................... 1-5/16 x 1-5/16C93-2626 .......................... 1-5/8 x 1-5/8C93-3030 .......................... 1-7/8 x 1-7/8C93-4040 .......................... 2-1/2 x 2-1/2
Short 90 deg. TubeM/F JIC x JICSAE 100R12
Working Pressure
P/Number ...................................ThreadC93H-1212 ..............................3/4 x 3/4C93H-1717 ................... 1-1/16 x 1-1/16C93H-2121 ................... 1-5/16 x 1-5/16C93H-2626 ....................... 1-5/8 x 1-5/8C93H-3030 ....................... 1-7/8 x 1-7/8
Long 90 deg. TubeM/F JIC x JIC
SAE 100R2 Working Pressure
P/Number ...................................ThreadC94-0707 .............................7/16 x 7/16C94-0808 .................................1/2 x 1/2C94-0909 .............................9/16 x 9/16C94-1212 .................................3/4 x 3/4C94-1414 .................................7/8 x 7/8C94-1717 ...................... 1-1/16 x 1-1/16C94-2121 ...................... 1-5/16 x 1-5/16C94-2626 .......................... 1-5/8 x 1-5/8C94-3030 .......................... 1-7/8 x 1-7/8
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.39
*Manufactured To Order (minimum qtys may apply)
Long 90 deg. TubeM/F JIC x JICSAE 100R12
Working Pressure
P/Number ................................... ThreadC94H-1212.............................. 3/4 x 3/4C94H-1717................... 1-1/16 x 1-1/16C94H-2121................... 1-5/16 x 1-5/16C94H-2626....................... 1-5/8 x 1-5/8C94H-3030....................... 1-7/8 x 1-7/8
Short 45 deg. Tube M/F JIC x JIC
SAE 100R2 Working Pressure
P/Number ................................... ThreadC95-0707............................. 7/16 x 7/16
* C95-0808................................. 1/2 x 1/2C95-0909............................. 9/16 x 9/16C95-1212................................. 3/4 x 3/4C95-1414................................. 7/8 x 7/8C95-1717...................... 1-1/16 x 1-1/16C95-2121...................... 1-5/16 x 1-5/16C95-2626.......................... 1-5/8 x 1-5/8
Straight FlangeheadJIC Male x SAE
(Code 61)SAE 100R2
Working Pressure
P/Number................Thread........ FlangeC96-1208 ................ 3/4 ....................1/2C96-1212 ................ 3/4 ....................3/4C96-1412 ................ 7/8 ....................3/4C96-1712 ................ 1-1/16...............3/4C96-1716 ................ 1-1/16.................. 1C96-1720 ................ 1-1/6..............1-1/4C96-2116 ................ 1-5/16.................. 1C96-2120 ................ 1-5/16............1-1/4C96-2124 ................ 1-5/16............1-1/2C96-2620 ................ 1-5/8..............1-1/4C96-2624 ................ 1-5/8..............1-1/2C96-2632 ................ 1-5/8.................... 2C96-3024 ................ 1-7/8..............1-1/2C96-3032 ................ 1-7/8.................... 2C96-4032 ................ 2-1/2.................... 290 Duro ‘O’ Ring supplied
Straight FlangeheadJIC Male x SAE
(Code 62)SAE 100R12
Working Pressure
P/Number................Thread........ FlangeC96H-1712 ............. 1-1/16...............3/4C96H-1716 ............. 1-1/16.................. 1C96H-2116 ............. 1-5/16.................. 1C96H-2120 ............. 1-5/16............1-1/4C96H-2620 ............. 1-5/8..............1-1/4C96H-2624 ............. 1-5/8..............1-1/2C96H-3020 ............. 1-7/8..............1-1/4C96H-3024 ............. 1-7/8..............1-1/290 Duro ‘O’ Ring supplied
90 deg. FlangeheadJIC Male x SAE
(Code 61)SAE 100R2
Working Pressure
P/Number....................... Thread.FlangeC97-1208 ....................... 3/4.............1/2C97-1212 ....................... 3/4.............3/4C97-1412 ....................... 7/8.............3/4C97-1416 ....................... 7/8............... 1C97-1712 ....................... 1-1/16 .......3/4C97-1716 ....................... 1-1/16 ..........1C97-1720 ....................... 1-1/16 ... 1-1/4
* C97-1724 ....................... 1-1/16 ... 1-1/2C97-2116 ....................... 1-5/16 ..........1C97-2120 ....................... 1-5/16 ... 1-1/4C97-2124 ....................... 1-5/16 ... 1-1/2C97-2616 ....................... 1-5/8 ............1C97-2620 ....................... 1-5/8 ..... 1-1/4C97-2624 ....................... 1-5/8 ..... 1-1/2C97-2632 ....................... 1-5/8 ............2
* C97-3020 ....................... 1-7/8 ..... 1-1/4C97-3024 ....................... 1-7/8 ..... 1-1/2C97-4032 ....................... 2-1/2 ............2C97-4040SUCTION...... 2-1/2 ..... 2-1/290 Duro ‘O’ Ring supplied
90 deg. FlangeheadJIC Male x SAE
(Code 62)SAE 100R12
Working Pressure
P/Number................Thread ........FlangeC97H-1712 .............1-1/16...............3/4C97H-1716 .............1-1/16..................1
* C97H-1720 .............1-1/16........... 1-1/4C97H-2112 .............1-5/16...............3/4C97H-2116 .............1-5/16..................1C97H-2120 .............1-5/16........... 1-1/4C97H-2620 .............1-5/8............. 1-1/4C97H-2624 .............1-5/8............. 1-1/2
* C97H-3020 .............1-7/8............. 1-1/4C97H-3024 .............1-7/8............. 1-1/2C97H-4024 .............2-1/2............. 1-1/290 Duro ‘O’ Ring supplied
4.40 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
45 deg. FlangeheadJIC Male x SAE
(Code 61)SAE 100R2
Working Pressure
P/Number................Thread ........FlangeC98-1208 ................3/4 ....................1/2C98-1212 ................3/4 ....................3/4C98-1712 ................1-1/16...............3/4C98-1716 ................1-1/16..................1C98-2116 ................1-5/16..................1C98-2120 ................1-5/16........... 1-1/4C98-2124 ................1-5/16........... 1-1/2C98-2620 ................1-5/8............. 1-1/4C98-2624 ................ 1-5/8 ............ 1-1/2
* C98-3024 ................1-7/8............. 1-1/290 Duro ‘O’ Ring supplied
45 deg. FlangeheadJIC Male x SAE
(Code 62)SAE 100R12
Working Pressure
P/Number................Thread ........FlangeC98H-1408 .............7/8 ....................1/2C98H-1712 .............1-1/16...............3/4C98H-2116 .............1-5/16..................1C98H-2620 .............1-5/8............. 1-1/4C98H-2624 .............1-5/8............. 1-1/290 Duro ‘O’ Ring supplied
Straight FlangeheadJIC Male x SAE
(Code 62)6000 psi
Working Pressure
P/Number ............... Thread ........Flange12FLH6K-12MJ..... 1-1/16 .............. 3/416FLH6K-12MJ..... 1-1/16 ................. 116FLH6K-16MJ..... 1.......................... 116FLH6K-20MJ..... 1.......................... 120FLH6K-16MJ..... 1-1/4 ............. 1-1/420FLH6K-20MJ..... 1-1/4 ............. 1-1/424FLH6K-20MJ..... 1-1/2 ............. 1-1/224FLH6K-24MJ..... 1-1/2 ............. 1-1/290 Duro ‘O’ Ring NOT included
45-deg FlangeheadJIC Male x SAE
(Code 62)6000 psi
Working Pressure
P/Number ............... Thread ........Flange12FLH6K-12MJ45. 1-1/16 .............. 3/416FLH6K-16MJ45. 1-5/16 ................. 120FLH6K-20MJ45. 1-5/8 ............. 1-1/490 Duro ‘O’ Ring NOT included
90-deg FlangeheadJIC Male x SAE
(Code 62)6000 psi
Working Pressure
P/Number ............... Thread........ Flange12FLH6K-12MJ90 . 1-1/16 .............. 3/412FLH6K-16MJ90 . 1-1/16 .............. 3/416FLH6K-12MJ90 . 1-1/16 ................. 116FLH6K-16MJ90 . 1-5/16 ................. 116FLH6K-20MJ90 . 1-5/8 ................... 120FLH6K-16MJ90 . 1-5/16 ...........1-1/420FLH6K-20MJ90 . 1-5/8 .............1-1/424FLH6K-20MJ90 . 1-5/8 .............1-1/290 Duro ‘O’ Ring NOT included
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.41
*Manufactured To Order (minimum qtys may apply)
SAE Split FlangeClamp Code 61
UNC & Metric Set ScrewsRefer Page 4.44
P/Number ................................... FlangeFSC-08 ............................................. 1/2FSC-12 ............................................. 3/4FSC-16 ................................................ 1FSC-20 ..........................................1-1/4FSC-24 ..........................................1-1/2FSC-32 ................................................ 2FSC-40 ..........................................2-1/2FSC-48 ................................................ 3
SAE Split FlangeClamp Code 62
UNC & Metric Set ScrewsRefer Page 4.44
P/Number ................................... FlangeFSCH-08........................................... 1/2FSCH-12........................................... 3/4FSCH-16.............................................. 1FSCH-20........................................1-1/4FSCH-24........................................1-1/2FSCH-32.............................................. 2
SAE Split FlangeCAT-style Clampc/w UNC Bolt Kit
P/Number ................................... Flange12CATFHS....................................... 3/416CATFHS.......................................... 120CATFHS....................................1-1/424CATFHS....................................1-1/232CATFHS.......................................... 2
Four Bolt FlangeBlank
Code 61 (3000 psi)UNC & Metric Set Screws
Refer Page 4.44
P/Number.................................... FlangeFL-08 ................................................1/2FL-12 ................................................3/4FL-16 ...................................................1FL-20 ............................................ 1-1/4FL-24 ............................................ 1-1/2FL-32 ...................................................2FL-40 ............................................ 2-1/2FL-48 ...................................................390 Duro ‘O’ Ring supplied
Four Bolt FlangeBlank
Code 62 (6000 psi)UNC & Metric Set Screws
Refer Page 4.44
P/Number.................................... FlangeFLH-08 .............................................1/2FLH-12 .............................................3/4FLH-16 ................................................1FLH-20 ......................................... 1-1/4FLH-24 ......................................... 1-1/2FLH-32 ................................................290 Duro ‘O’ Ring supplied
Flange BlankFP = Code 61
FPH = Code 62
P/Number.................................... FlangeFP-08 ................................................1/2FP-12 ................................................3/4FP-16 ...................................................1FP-20 ............................................ 1-1/4FP-24 ............................................ 1-1/2FP-32 ...................................................2FPH-08..............................................1/2FPH-12..............................................3/4FPH-16.................................................1FPH-20.......................................... 1-1/4FPH-24...........................................1/1/2FPH-32.................................................290 Duro ‘O’ Ring supplied
Four Bolt FlangeBSPP
Code 61 (3000 psi)UNC & Metric Set Screws
Refer Page 4.44
P/Number ....................... Thread/FlangeFB-08 ............................................... 1/2FB-12 ............................................... 3/4FB-16 ...................................................1FB-20 ............................................ 1-1/4FB-24 ............................................ 1-1/2FB-32 ...................................................2FB-40 ............................................ 2-1/2FB-48 ...................................................390 Duro ‘O’ Ring supplied
Four Bolt FlangeNPT
Code 61 (3000 psi)UNC & Metric Set Screws
Refer Page 4.44)
P/Number ....................... Thread/FlangeFN-08 ............................................... 1/2FN-12 ............................................... 3/4FN-16 ...................................................1FN-20 ............................................ 1-1/4FN-24 ............................................ 1-1/2FN-32 ...................................................290 Duro ‘O’ Ring supplied
Four Bolt FlangeBSPP
Code 62 (6000 psi)UNC & Metric Set Screws
Refer Page 4.44
P/Number ....................... Thread/FlangeFBH-12 ............................................ 3/4FBH-16 ................................................1FBH-20 ......................................... 1-1/4FBH-24 ......................................... 1-1/2FBH-32 ................................................290 Duro ‘O’ Ring supplied
4.42 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
‘O’ Ring to suitSAE ‘O’ Ring Boss Thread
P/Number ....................................... SizeR01-06.............................................. 3/8R01-07............................................ 7/16R01-08.............................................. 1/2R01-09............................................ 9/16R01-12.............................................. 3/4R01-14.............................................. 7/8R01-17.........................................1-1/16R01-19.........................................1-3/16R01-21.........................................1-5/16R01-26...........................................1-5/8R01-30...........................................1-7/8R01-40...........................................2-1/2
‘O’ Ring to SuitSAE Flange
P/Number ....................................... SizeR02-08.............................................. 1/2R02-12.............................................. 3/4R02-16................................................. 1R02-20...........................................1-1/4R02-24...........................................1-1/2R02-32................................................. 2R02-40...........................................2-1/2R02-48................................................. 3
‘O’ Ring to SuitBSPP Threads
P/Number ....................................... SizeR03-02.............................................. 1/8R03-04.............................................. 1/4R03-06.............................................. 3/8R03-08.............................................. 1/2R03-12.............................................. 3/4R03-16................................................. 1R03-20...........................................1-1/4R03-24...........................................1-1/2
Dowty SealBSPP Thread
DIN Std
P/Number........................................ SizeR04-02 .............................................. 1/8R04-04 .............................................. 1/4R04-06 .............................................. 3/8R04-08 .............................................. 1/2R04-12 .............................................. 3/4R04-16 ................................................. 1R04-20 ...........................................1-1/4
Dowty SealBSPP Thread
B.S. Std
P/Number........................................ SizeR04B-02 ........................................... 1/8R04B-04 ........................................... 1/4R04B-06 ........................................... 3/8R04B-08 ........................................... 1/2R04B-12 ........................................... 3/4R04B-16 .............................................. 1R04B-20 ........................................1-1/4R04B-24 ........................................1-1/2R04B-32 .............................................. 2R04B-40 ........................................2-1/2
Dowty SealMetric Thread
P/Number........................................SizeR04M-08.......................................... M8R04M-10........................................ M10R04M-12........................................ M12R04M-14........................................ M14R04M-16........................................ M16R04M-18........................................ M18R04M-20........................................ M20R04M-22........................................ M22R04M-24........................................ M24R04M-26........................................ M26R04M-27........................................ M27R04M-33........................................ M33R04M-42........................................ M42R04M-48........................................ M48
‘O’ Ring to SuitMale Swivel
P/Number........................................SizeR05-04 ..............................................1/4R05-06 ..............................................3/8R05-08 ..............................................1/2
‘O’ Ring to SuitORFS Fittings
P/Number........................................SizeR06-09 ............................................9/16R06-11 ..........................................11/16R06-13 ..........................................13/16R06-16 .................................................1R06-19 ........................................ 1-3/16R06-23 ........................................ 1-7/16R06-27 ...................................... 1-11/16R06-32 .................................................2
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.43
*Manufactured To Order (minimum qtys may apply)
Retaining Ring ForBSPP ‘O’ Ring
P/Number ....................................... SizeR13-02.............................................. 1/8R13-04.............................................. 1/4R13-06.............................................. 3/8R13-08.............................................. 1/2R13-12.............................................. 3/4R13-16................................................. 1R13-20...........................................1-1/4R13-24...........................................1-1/2
’O’ Ring Encapsulatedto Suit BSPP Threads
P/Number ....................................... SizeR19-02.............................................. 1/8R19-04.............................................. 1/4R19-06.............................................. 3/8R19-08.............................................. 1/2R19-12.............................................. 3/4R19-16................................................. 1R19-20...........................................1-1/4R19-24...........................................1-1/2
Metric & BSPPSeal Rings
P/Number........................................ SizeDKR-1/4 ...........................................1/4DKR-3/8 ...........................................3/8DKR-1/2 ...........................................1/2DKR-3/4 ...........................................3/4DKR-1 ................................................. 1DKR-1-1/4.....................................1-1/4DKR-1-1/2.....................................1-1/2DKR-M12...................................... M12DKR-M14...................................... M14DKR-M16...................................... M16DKR-M18...................................... M18DKR-M22...................................... M22
Southcott O-ring Kit
UNO, ORFS, C61 & C62
P/Number...............................................SORKIT.................................................
Southcott O-ring Kit
BSPP O-ring & retainer
P/Number...............................................SORKIT-P ............ BSPP O-ring & Ret.
SouthcottBonded Seal Kit
Metric Seal
P/Number...............................................SORKIT-DM .........................................
SouthcottBonded Seal Kit
BSPP Seal
P/Number...............................................SORKIT-DP ..........................................
4.44 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
BOLT KITUNC
includes four cap screwsfour spring washers
one 90 Duro ‘O’ RingSuits split or solid type
P/Number................................... ThreadBKU-5/16CAP................... 5/16 x 18tpiBKU-3/8CAP....................... 3/8 x 16tpiBKU-7/16CAP................... 7/16 x 14tpiBKU-1/2CAP....................... 1/2 x 13tpiBKU-5/8CAP....................... 5/8 x 11tpiBKU-3/4CAP....................... 3/4 x 10tpiBKUH-3/8CAP.................... 3/8 x 16tpiBKUH-7/16CAP................ 7/16 x 14tpiBKUH-1/2CAP.................... 1/2 x 13tpi
BOLT KITUNC
includes four hex head boltsfour spring washers
one 90 Duro ‘O’ RingSuits split type only
P/Number................................... ThreadBKU-5/16HEX .................. 5/16 x 18tpiBKU-3/8HEX ...................... 3/8 x 16tpiBKU-7/16HEX .................. 7/16 x 14tpiBKU-1/2HEX ...................... 1/2 x 13tpiBKU-5/8HEX ...................... 5/8 x 11tpiBKU-3/4HEX ...................... 3/4 x 10tpiBKUH-3/8HEX ................... 3/8 x 16tpiBKUH-7/16HEX ............... 7/16 x 14tpiBKUH-1/2HEX ................... 1/2 x 13tpi
BOLT KITMETRIC
includes four cap screwsfour spring washers
one 90 Duro ‘O’ RingSuits split or solid type
P/Number ................................... ThreadBKM-08CAP ........................M8 x 1.25BKM-10CAP ........................M10 x 1.5BKM-12CAP ......................M12 x 1.75BKM-14CAP ...........................M14 x 2BKM-16CAP ...........................M16 x 2BKM-20CAP ........................M20 x 2.5BKMH-10CAP......................M10 x 1.5BKMH-12CAP....................M12 x 1.75BKMH-16CAP.........................M16 x 2
BOLT KITMETRIC
includes four hex head boltsfour spring washers
one 90 Duro ‘O’ RingSuits split type only
P/Number ................................... ThreadBKM-08HEX........................M8 x 1.25BKM-10HEX........................M10 x 1.5BKM-12HEX......................M12 x 1.75BKM-14HEX...........................M14 x 2BKM-16HEX...........................M16 x 2BKM-20HEX........................M20 x 2.5BKMH-10HEX .....................M10 x 1.5BKMH-12HEX ...................M12 x 1.75
Code 61
Dash Size
Inch-Size
A B M.W. P.psi
-08 1/2" 38.1 17.5 5000
-12 3/4" 47.6 22.3 5000
-16 1" 52.4 26.2 5000
-20 1-1/4" 58.7 30.2 4000
-24 1-1/2" 69.8 35.7 3000
-32 2" 77.8 42.9 3000
-40 2-1/2" 88.9 50.8 2500
-48 3" 106.4 61.9 2000
Code 62
Dash Size
Inch-Size
A B M.W. P.psi
-08 1/2" 40.5 18.2 6000
-12 3/4" 50.8 23.8 6000
-16 1" 57.1 27.8 6000
-20 1-1/4" 66.7 31.8 6000
-24 1-1/2" 79.4 36.5 6000
-32 2" 96.8 44.5 6000
FLANGE BOLT CENTRES
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.45
*Manufactured To Order (minimum qtys may apply)
PLUG PLASTICJIC/SAE/ORFS
P/Number ........ .......................... ThreadPPJ-07 ............. .............................. 7/16PPJ-08 ............. ................................ 1/2PPJ-09 ............. .............................. 9/16PPJ-10 ............. ................................ 5/8PPJ-11 ............. ............................ 11/16PPJ-12 ............. ................................ 3/4PPJ-13 ............. ............................ 13/16PPJ-14 ............. ................................ 7/8PPJ-16 ............. ................................... 1PPJ-17 ............. ...........................1-1/16PPJ-19 ............. ...........................1-3/16PPJ-21 ............. ...........................1-5/16PPJ-23 ............. ...........................1-7/16PPJ-26 ............. .............................1-5/8PPJ-30 ............. .............................1-7/8PPJ-40 ............. .............................2-1/2
PLUG PLASTICBSP/NPT
P/Number ........ .......................... ThreadPPB-02 ............ ................................ 1/8PPB-04 ............ ................................ 1/4PPB-06 ............ ................................ 3/8PPB-08 ............ ................................ 1/2PPB-10 ............ ................................ 5/8PPB-12 ............ ................................ 3/4PPB-16 ............ ................................... 1PPB-20 ............ .............................1-1/4PPB-24 ............ .............................1-1/2PPB-32 ............ ................................... 2
PLUG PLASTICMETRIC
P/Number ..... ............................. ThreadPPM-12 ........ ........................M12 x 1.5PPM-14 ........ ........................M14 x 1.5PPM-16 ........ ........................M16 x 1.5PPM-20 ........ ........................M20 x 1.5PPM-22 ........ ........................M22 x 1.5PPM-24 ........ ........................M24 x 1.5PPM-26 ........ ........................M26 x 1.5PPM-30 ........ ...........................M30 x 2PPM-33 ........ ...........................M33 x 2PPM-36 ........ ...........................M36 x 2PPM-42 ........ ...........................M42 x 2PPM-52 ........ ...........................M52 x 2
CAP PLASTICJIC/SAE/ORFS
P/Number...... .............................ThreadCPJ-07 .......... .................................7/16CPJ-08 .......... ...................................1/2CPJ-09 .......... .................................9/16CPJ-10 .......... ...................................5/8CPJ-11 .......... ...............................11/16CPJ-12 .......... ...................................3/4CPJ-13 .......... ...............................13/16CPJ-14 .......... ...................................7/8CPJ-16 .......... ...................................... 1CPJ-17 .......... ..............................1-1/16CPJ-19 .......... ..............................1-3/16CPJ-21 .......... ..............................1-5/16CPJ-23 .......... ..............................1-7/16CPJ-26 .......... ................................1-5/8CPJ-30 .......... ................................1-7/8
CAP PLASTICBSP/NPT
P/Number....... ............................ThreadCPB-02 .......... ..................................1/8CPB-04 .......... ..................................1/4CPB-06 .......... ..................................3/8CPB-08 .......... ..................................1/2CPB-10 .......... ..................................5/8CPB-12 .......... ..................................3/4CPB-16 .......... ..................................... 1CPB-20 .......... ...............................1-1/4CPB-24 .......... ...............................1-1/2CPB-32 .......... ..................................... 2
CAP PLASTICMETRIC
P/Number....... ............................ThreadCPM-08 ......... ........................ M8 x 1.0CPM-10 ......... ...................... M10 x 1.0CPM-12 ......... ...................... M12 x 1.5CPM-14 ......... ...................... M14 x 1.5CPM-16 ......... ...................... M16 x 1.5CPM-20 ......... ...................... M20 x 1.5CPM-22 ......... ...................... M22 x 1.5CPM-24 ......... ...................... M24 x 1.5CPM-26 ......... ...................... M26 x 1.5CPM-30 ......... ......................... M30 x 2CPM-33 ......... ......................... M33 x 2CPM-36 ......... ......................... M36 x 2CPM-42 ......... ......................... M42 x 2CPM-52 ......... ......................... M52 x 2
CAP PLASTICFLANGE CODE 61
P/Number.......... ........................ ThreadCPF61-08.......... ...............................1/2CPF61-12.......... ...............................3/4CPF61-16.......... ..................................1CPF61-20.......... ........................... 1-1/4CPF61-24.......... ........................... 1-1/2CPF61-32.......... ..................................2
CAP PLASTICFLANGE CODE 62
P/Number......... ......................... ThreadCPF62-08......... ................................1/2CPF62-12......... ................................3/4CPF62-16......... ...................................1CPF62-20......... ............................ 1-1/4CPF62-24......... ............................ 1-1/2CPF62-32......... ...................................2
4.46 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
NFPA and ISO Approve use ofSeals in Flared Fittings
The most recent revision of the National Fluid Power Association’s(NFPA) standard relating to "Hydraulic Fluid Power systems -Methods For Preventing External Leakage" now recommends the useof compliant seals to address the universal weeping problem of JICflared fittings.
NFPA now joins the International Standards Organization (ISO) as thetwo leading standards organizations in the world both recommendingseals be fitted to JIC type flared joints to address both environmentaland OH&S issues.
Flaretite Seals have a proven history of positive leak-free performanceon the most difficult and challenging global applications, such as theM1 Abrams Tanks and the latest M-777 Howitzer, where severe shockloads and vibration saw JIC flared fitting joints fail on commissioning.
In addition to these and other US Army and Navy applications Flaretiteseals are fitted by manufacturers such as Wind Generator Drives andKanga Loaders in Australia on their ride-on mini loaders to eliminatecostly rework and customer compliant warranty issues.
Flaretite Seals are a metal stamping with multiple concentric rings.They are impregnated with a special Loctite coating and when insertedinto a flared fitting joint the concentric rings form multiple seals downthe face of the flare whilst the loctite coating fills minor fitting faceimperfections providing a positive leak free seal solution.
Flaretite Seals are available in 304 stainless for 37 degree JIC standardHydraulic system use and 316 stainless for marine applications. Theyare also available in 30 degree JIS, 45 degree (SAE J512 Automotive)and 45 degree (SAE J513) in copper for gas and refrigeration use.
Section 4Adaptors
For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 4.47
*Manufactured To Order (minimum qtys may apply)
Standard PackPart No.
JIC Thread Size Pack Qty.
BP-37FT04-304-SOR 7/16" 20
BP-37FT06-304-SOR 9/16" 20
BP-37FT08-304-SOR 3/4" 20
BP-37FT10-304-SOR 7/8" 20
BP-37FT12-304-SOR 1-1/16" 20
BP-37FT16-304-SOR 1-5/16" 20
BP-37FT20-304-SOR 1-5/8" 20
BP-37FT24-316-SGR 1-7/8" 10
BP-37FT32-316-SGR 2-1/2" 10
Seals the mating faces of any standard JIC/SAE/JIS flare joint
Bulk Pack JIC Thread Size Pack Qty.
QT-37FT04-304-SOR 7/16" 100
QT-37FT06-304-SOR 9/16" 100
QT-37FT08-304-SOR 3/4" 100
QT-37FT10-304-SOR 7/8" 100
QT-37FT12-304-SOR 1-1/16" 100
QT-37FT16-304-SOR 1-5/16" 50
QT-37FT20-304-SOR 1-5/8" 50
QT-37FT24-316-SGR 1-7/8" 25
QT-37FT32-316-SGR 2-1/2" 10
FLARETITE GRAB PACK7/16", 9/16", 3/4", 7/8",1 1/16", 1 5/16", 1 5/8"
5, 5, 5, 5,5, 5, 5
Flaretite seals are available in 316 marine grade stainless steel in all sizes on request
Individual SealPart No.
JIC Thread Size Pack Qty.
IP-37FT04-304-SOR 7/16" 1
IP-37FT06-304-SOR 9/16" 1
IP-37FT08-304-SOR 3/4" 1
IP-37FT10-304-SOR 7/8" 1
IP-37FT12-304-SOR 1-1/16" 1
IP-37FT16-304-SOR 1-5/16" 1
IP-37FT20-304-SOR 1-5/8" 1
IP-37FT24-316-SGR 1-7/8" 1
IP-37FT32-316-SGR 2-1/2" 1
FLARETITE SEALS
4.48 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.
Section 4Adaptors
*Manufactured To Order (minimum qtys may apply)
BanjoMetric c/w Back Bore
P/Number ............... Diam..........B/BoreBJ1-08 .................... 8.......................... 5BJ1-10 .................... 10........................ 6BJ1-12 .................... 12........................ 8BJ1-14 .................... 14...................... 10
BanjoBSPP c/w Back Bore
P/Number ............... Diam..........B/BoreBJ2-02 .................... 1/8.................... 1/8BJ2-04 .................... 1/4.................... 1/4BJ2-06 .................... 3/8.................... 3/8BJ2-08 .................... 1/2.................... 1/2
BanjoMetric to JIC-M
P/Number ............... Diam................JICBJ3-0807 ................ 8..................... 7/16BJ3-0809 ................ 8..................... 9/16BJ3-1007 ................ 10................... 7/16BJ3-1009 ................ 10................... 9/16BJ3-1209 ................ 12................... 9/16BJ3-1409 ................ 14................... 9/16
Banjo BoltMetric
P/Number................ Diam .............PitchBJB-08Mx1.0 ......... 8 ..................... 1.00BJB-08Mx1.25 ....... 8 ..................... 1.25BJB-10Mx1.0 ......... 10 ................... 1.00BJB-12Mx1.5 ......... 12 ................... 1.50BJB-14Mx1.5 ......... 14 ................... 1.50
Banjo BoltBSPP
P/Number................ ....................... SizeBJB-02B ................. .........................1/8BJB-04B ................. .........................1/4BJB-06B ................. .........................3/8BJB-08B ................. .........................1/2
Banjo Washer
P/Number................ Type............... SizeBJW-08M ............... Metric ................. 8BJW-10M ............... Metric ............... 10BJW-12M ............... Metric ............... 12BJW-14M ............... Metric ............... 14BJW-02B ................ BSPP................1/8BJW-04B ................ BSPP................1/4BJW-06B ................ BSPP................3/8BJW-08B ................ BSPP................1/2
*Available on Request - Minimum Order Quantities May Apply 5.1
Section 5Accessories
QUICK RELEASE COUPLINGS - FASTERNV.............................. Valve Type Coupling ......................................................................................................5.3NS .............................. Ball Type Couplings .......................................................................................................5.3PV .............................. Push-Pull .........................................................................................................................5.3VV.............................. Screw On Heavy Duty ....................................................................................................5.4PVVM........................ Screw On.........................................................................................................................5.4FFH & 2FFI ............... Flat-Faced Couplings ......................................................................................................5.53FFI............................ Flat-Faced Couplings ......................................................................................................5.54FFI............................ Mobile Connector With Drain ........................................................................................5.53FFV .......................... Flat-Faced Screw Together .............................................................................................5.63CFPV ....................... Valve Type Rigid Mount Coupling.................................................................................5.6ANV........................... A Series Standard Coupling ............................................................................................5.6NZ .............................. Interchange with PB3310 Coupling ................................................................................5.6DF .............................. Coupling Test Point.........................................................................................................5.7
QUICK RELEASE COUPLINGS - SUNDRIES - FASTERTM & TF.................... PVC Dust Plug & Caps to suit NV couplings.................................................................5.7TMV & TFV.............. Aluminium Dust Plugs & Caps to suit VV couplings.....................................................5.7TMP & TFP ............... Aluminium Dust Plugs & Caps to suit P couplings ........................................................5.7TM2FN & TF2FN ..... Dust Covers to suit FFN series........................................................................................5.8TM2FJ & TF2FJ ........ Dust Covers to suit FFI series .........................................................................................5.8SD .............................. Dual Bracket....................................................................................................................5.8SS-12M ...................... Support Nipple ................................................................................................................5.8TA .............................. Self-Closing Dust Cap.....................................................................................................5.8
QUICK RELEASE COUPLINGS - MULTIFASTER................................... Standard MultiFaster .......................................................................................................5.9................................... Front End Loader MultiFaster.........................................................................................5.9................................... New Holland MultiFaster................................................................................................5.9
QUICK RELEASE COUPLINGS - TEMA................................... Coupling..........................................................................................................................5.10................................... Dust Plug.........................................................................................................................5.10................................... Dust Cap..........................................................................................................................5.10
SWIVEL JOINTS - TEMA................................... Swivel Joint .....................................................................................................................5.10
PORTA-POWER HOSES................................... Replacement Hose Assemblies .......................................................................................5.11................................... Quick-Release Couplings................................................................................................5.11
PIPE CLAMPS - SINGLES STD & MED DUTYC2 - C7....................... Standard & Medium Duty Clamps..................................................................................5.12PD1 - PD7.................. Double Plate ....................................................................................................................5.13PM1 - PM7................. Multiple Plate ..................................................................................................................5.13BB, DF6 ..................... Track & Nut ....................................................................................................................5.13VA1 - VA7................. Stacking Bolt M & F .......................................................................................................5.13
PIPE CLAMPS - SINGLES HEAVY DUTY CP1 - CP4 .................. Heavyweight Clamp........................................................................................................5.14VA-CP ....................... Stacking Bolt M & F .......................................................................................................5.14
PIPE CLAMPS - DOUBLESCF1 - CF5 .................. Double Clamp .................................................................................................................5.15VA-CF ....................... Stacking Bolt M & F .......................................................................................................5.15
CROSS REFERENCE................................... Pipe Clamp Selection Chart ............................................................................................5.16
5.2 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
SWIVEL JOINTSS SERIES ................... In Line Swivel Joints...................................................................................................... 5.179S SERIES ................. 90 Swivel Joints ............................................................................................................. 5.18S-SERIES................... Swivel Joint Seal Kits .................................................................................................... 5.19
ROTARY COUPLINGS - MTCGGIL SERIES............ In Line Rotary Couplings ............................................................................................... 5.20GG90 SERIES ........... 90° Rotary Couplings ..................................................................................................... 5.20
PRESSURE GAUGES.................................... Pressure Gauge - Quadrigauge ....................................................................................... 5.20.................................... Pressure Gauge - Glycerine-Filled Dual Scale............................................................... 5.21.................................... Pressure Gauge - Digital ................................................................................................ 5.21.................................... Pressure Gauge Isolator.................................................................................................. 5.21.................................... Pressure Gauge Adaptors ............................................................................................... 5.21
TEST POINTS.................................... Test Point Couplings ...................................................................................................... 5.22.................................... Test Point to Gauge Adaptor .......................................................................................... 5.22.................................... Test Point Hose Assemblies ........................................................................................... 5.22.................................... Test Point Tees ............................................................................................................... 5.23
TUBE.................................... Hydraulic Tube............................................................................................................... 5.24
COMPRESSION FITTTINGS.................................... Versa Flare Compression Fittings .................................................................................. 5.25
HOSE CLAMPS.................................... Low Pressure and Suction Hose..................................................................................... 5.26.................................... Worm Drive Clamps ...................................................................................................... 5.27.................................... Powergrip Shrinkband Clamps....................................................................................... 5.28
SWAGING MACHINES.................................... Child ............................................................................................................................... 5.29
CUT-OFF SAWS.................................... DC & AC........................................................................................................................ 5.29
*Available on Request - Minimum Order Quantities May Apply 5.3
Section 5Accessories
NV SERIES
Valve Type: Interchangeable to ISO 7241-1 ‘A’ Standards in 1/2”
Dust Plugs and Caps see page 5.7
NS SERIES
Ball Type: Interchangeable to ISO 7241-1 ‘A’ Standards in 1/2”
Dust Plugs and Caps see page 5.7
PV SERIES
Valve Type: Push/Pull Couplings. Interchangeable to ISO 7241-1 ‘A’ Standards.
THRDBSPP
MWPBAR
MALE HALFFEMALE
HALFCOMPLETE
1/4 350 NV-14GAS-M NV-14GAS-F NV-14GAS
3/8 300 NV-38GAS-M NV-38GAS-F NV-38GAS
1/2 300 NV-12GAS-M NV-12GAS-F NV-12GAS
3/4 250 NV-34GAS-M NV-34GAS-F NV-34GAS
1 230 NV-1GAS-M NV-1GAS-F NV-1GAS
1 1/4 220 NV-114GAS-M NV-114GAS-F NV-114GAS
1 1/2 180 NV-112GAS-M NV-112GAS-F NV-112GAS
2 130 NV-2GAS-M NV-2GAS-F NV-2GAS
THRDNPT
MWPBAR
MALE HALFFEMALE
HALFCOMPLETE
1/4 250 NS-14NPT-M NS-14NPT-F NS-14NPT
3/8 250 NS-38NPT-M NS-38NPT-F NS-38NPT
1/2 200 NS-12NPT-M NS-12NPT-F NS-12NPT
3/4 170 NS-34NPT-M NS-34NPT-F NS-34NPT
1 220 NS-1NPT-M NS-1NPT-F NS-1NPT
THRDBSPP
MWPBAR
MALE HALFFEMALE
HALFCOMPLETE
*1/2 200 NS-12GAS-M NS-12GAS-F NS-12GAS
THRDBSPP
WPBAR
MALE HALFFEMALE
HALFCOMPLETE
1/2 260 NV-12GAS-M PV-12GAS-F PV-12GAS
5.4 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
VV SERIES
Valve Type: Screw on couplings. Heavy Duty Series
Dust Plugs and Caps see page 5.7
PVVM SERIESPorta-Power Couplers
Valve Type: Screw on couplings. Heavy Duty Series.
Dust Plugs and Caps see page 5.7
THRDBSPP
MWPBAR
MALE HALFFEMALE
HALFCOMPLETE
3/8 300 VV-38GAS-M VV-38GAS-F VV-38GAS
1/2 300 VV-12GAS-M VV-12GAS-F VV-12GAS
3/4 250 VV-34GAS-M VV-34GAS-F VV-34GAS
1 230 VV-1GAS-M VV-1GAS-F VV-1GAS
ThreadNPT
MWPBAR
MALE HALFFEMALE
HALFCOMPLETE
1/4" 1050 PVVM-14NPT-M PVVM-1/14NPT-F PVVM-14NPT
3/8" 1000 PVVM-38NPT-M PVVM-1/38NPT-F PVVM-38NPT
*Available on Request - Minimum Order Quantities May Apply 5.5
Section 5Accessories
FFH & 2FFI SERIESFlat Face: Connectability: without pressure
Dust Plugs and Caps see page 5.8
3FFI SERIES
Flat Face:Connectability: male under pressure, female free to drain
Dust Plugs and Caps see page 5.8
4FFI SERIESFlat Face:Connectability: both male and female couplings under pressure
THREADMWPBAR
MALE HALF FEMALE HALF
1/4"BSPP 350 FFH04-14GAS-M FFH04-14GAS-F
3/8"BSPP 350 FFH06-38GAS-M FFH06-38GAS-F
1/2"BSPP 350 FFH06-12GAS-M FFH06-12GAS-F
1/2"BSPP 350 FFH08-12GAS-M FFH08-12GAS-F
3/4"BSPP 350 FFH08-34GAS-M FFH08-34GAS-F
3/4"BSPP 350 FFH10-34GAS-M FFH10-34GAS-F
3/4"BSPP 350 FFH12-34GAS-M FFH12-34GAS-F
1"BSPP 350 FFH12-1GAS-M FFH12-1GAS-F
1"BSPP 250 FFI-1GAS-M 2FFI-1GAS-F
3/4"UN-O 350 FFH06-12SAE-M FFH06-12SAE-F
7/8"UN-O 350 FFH08-58SAE-M FFH08-58SAE-F
1-1/16"UN-O 350 FFH08-34SAE-M FFH08-34SAE-F
1-1/16"UN-O 350 FFH12-34SAE-M FFH12-34SAE-F
1-5/16"UN-O 350 FFH12-1SAE-M FFH12-1SAE-F
THREADMWPBAR
MALE HALF FEMALE HALF
3/8"BSPP 250 3FFI-38GAS-M FFH06-38GAS-F
1/2"BSPP 250 3FFI-12GAS-M FFH08-12GAS-F
3/4"BSPP 250 3FFI-34GAS-M FFH12-34GAS-F
1"BSPP 250 3FFI-1GAS-M 2FFI-1GAS-F
THREADMWPBAR
MALE HALF FEMALE HALF
7/8"JIC-M 275 4BD4FI12-13/58S
1-1/16"JIC-M 275 4BD4FI12-13/34S
Spare Part Kits for the above
Male & Female Spares 4FI-12-M 4FI-12-F
Centre Drain Line KIT4BD-FFN38M
5.6 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
3FFV SERIES
Flat Face: Screw-on type. Connectability: male & female under pressureThis coupling is resistant to pressure peaks (hammer circuits)
3CFPV SERIES G Case N New HollandH John Deere Q Sisu (Valmet)M Massey Ferguson
Agricultural SeriesPush/Pull Couplings, rigid mount. ISO7241-A
ANV SERIES
Coupling: A Series StandardInterchangeable to ISO 7241-1:
NZ SERIES
Coupling: Interchange with PB3310 (PBR 1"truck)
THRDBSPP
MWPBAR
MALE HALF FEMALE HALF
1/2 300 3FFV-12GAS-M 3FFV-12GAS-F
3/4 300 3FFV-34GAS-M 3FFV-34GAS-F
1 400 3FFV-1GAS-M 3FFV-1GAS-F
1¼ 400 3FFV-114GAS-M 3FFV-114GAS-F
1½ 400 3FFV-112GAS-M 3FFV-112GAS-F
THRDMWPBAR
MALE HALF OEM FEMALE HALF
7/8 UNF 250 NV or 2NV G 3CFPV-1/78UNF-F
M22X1.5 250 NV or 2NV G H M N 3CFPV-1/2215-F
7/8 UNF 250 NV or 2NV Q 3CFPV-14/78UNF-F
THREADMWPBAR
MALE HALF FEMALE HALF
1/4" NPT-F 350 ANV-14NPT-M ANV-14NPT-F
3/8" BSPP-F 300 ANV-38GAS-M ANV-38GAS-F
3/4" BSPP-F 250 ANV-34GAS-M ANV-34GAS-F
1" BSPP-F 230 ANV-1GAS-M ANV-1GAS-F
THREADMWPBAR
MALE HALF FEMALE HALF
1" BSPT-F 230 PBR-16MT PBR-16FB
Dust Cap & Plug PBR-16DC PBR-16DP
*Available on Request - Minimum Order Quantities May Apply 5.7
Section 5Accessories
DF SERIES
Coupling Test Point:
TM & TF PVC DUST PLUGS & CAPSTo suit NV, NS Series
To suit NV and NS seriesStandard colour BLUE, also available in ORANGE, YELLOW, BLACK, RED, GREEN
TMV & TFV ALUMINIUM DUST PLUGS & CAPSTo suit VV Series
TMP & TFP DUST PLUGS & CAPSTo suit P Series
THREADMWPBAR
MALE HALF FEMALE HALF
1/8 NPTF (Female) 480 DF04-18NPT-M DF04-18NPT-F
1/4 NPTF (Female) 480 DF04-14NPT-M DF04-14NPT-F
1/4 NPTF (Male) 480 DF04-1/14NPT-M DF04-1/14NPT-F
7/16 UN’O’ (Male) 480 DF04-1/14SAE-M DF04-1/14SAE-F
1/2 UN’O’ (Male) 480 DF04-1/516SAE-M DF04-1/516SAE-F
9/16 UN’O’ (Male) 480 DF04-1/38SAE-M DF04-1/38SAE-F
Size Plug Cap1/4 TM-14 TF-14
3/8 TM-38 TF-38
1/2 TM-12 TF-12
3/4 TM-34 TF-34
1 TM-1 TF-1
Size Plug Cap1/4 TMV-14S TFV-14S
3/8 TMV-38S TFV-38S
1/2 TMV-12S TFV-12S
3/4 TMV-34S TFV-34S
1 TMV-1S TFV-1S
Size Plug Cap1/4 TMP-14 TFP-14
3/8 TMP-38 TFP-38
5.8 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
TM2FN & TF2FN ALUMINIUM DUST COVERSTo suit FFN Series
TM2FJ & TF2FJ ALUMINIUM DUST COVERSTo suit FFI Series
SD DUAL BRACKET 1/2” COUPLING
SS SUPPORT NIPPLE
TA SELF CLOSING DUST CAPFOR PUSH/PULL COUPLINGS
Size Suit Female Suit Male3/8 TM2FN38S TF2FN38S
1/2 TM2FN12S TF2FN12S
3/4 TM2FN34S TF2FN34S
1 TM2FN1S TF2FN1S
Size Plug Cap1/4 TM2FJ14S TF2FJ14S
1/2 TM2FJ12S TF2FJ12S
3/4 TM2FJ34S TF2FJ34S
Part No.
SD-12
Part No.
SS-12M
Part No.
TA-12
*Available on Request - Minimum Order Quantities May Apply 5.9
Section 5Accessories
MULTIFASTERQuick-Release Multiconnection System
Standard MultiFaster
Front End Loader MultiFaster
New Holland MultiFaster Special
All MultiFaster connectors can include electrical connections and/or air connections. Theapplications and options are limited only by our imaginations.
BaseSize
ThreadBSPP
Qty OfLines
Elec. Conn.
Fixed Half Mobile Half
06 1/2 2 N 2P206-2-12G-FC 2P206-2-12G-MC
08 1/2 2 N 2P208-2-12G-FC 2P208-2-12G-MC
06 1/2 4 N 2P506-4-12G-FC 2P506-4-12G-MC
08 1/2 4 N 2P508-4-12G-FC 2P508-4-12G-MC
06 1/2 6 N 2P606-6-12G-FC 2P606-6-12G-MC
08 1/2 6 N 2P608-6-12G-FC 2P608-6-12G-MC
BaseSize
ThreadBSPP
Qty OfLines
Elec. Conn.
Fixed Half Mobile Half
06 3/8 4 N 2PS06-4-38G-FC 2PS06-4-38G-MC
06 1/2 4 N 2PS06-4-12G-FC 2PS06-4-12G-MC
08 1/2 4 Y 2PS08-1-4-12G-FC 2PS08-1-4-12G-MC
BaseSize
ThreadBSPP
Qty OfLines
Elec. Conn.
Fixed Half Mobile Half
06 ¼ / 5/8 5 N 2P5065-5-A-FC 3P5065-5-A-MC
TECHNICAL DATABase Size
Rated Flow L/min
Max. PressureBar
Fluid Spillagecc Max.
06 38 250 0.008
08 52 250 0.01
12 125 250 0.02
5.10 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
TEMA SERIESQuick Release Couplings
TEMA SWIVEL JOINTS
The Tema Swivel Joint has very low torque even at max. working pressure, due to a balanced spindle seal.The Tema Swivel Joint has been shocked tested under pressure from 0-250 bar
PortBSPP
M WPbar
MaleHalf
FemaleHalf
CompleteCoupler
1/4" 450 2520. 2510. 2500
3/8" 350 3820. 3810. 3800
1/2" 300 5020. 5010. 5000
3/4" 280 7520. 7510. 7500
1" 250 10020. 10010. 10000
Dust Plug SizeDustCap
Size
2516 1/4" 2526 1/4"
3816 3/8" 3826 3/8"
5016 1/2" 5026 1/2"
7516 3/4" 7526 3/4"
10016 1" 10026 1"
Part No.Port GBSPP
Port G1BSPP
L ODHEX
1HEX
2A
MWPbar
Weight kg
250. 1/4" 3/8" 53 23 22 18 12 250 .105
500. 1/2" 3/4" 71 34 32 25 16 250 .250
750. 3/4" 1" 80 43 40 32 20 250 .460
1000. 1" 1 1/4" 86 53 50 38 22 250 .700
*Available on Request - Minimum Order Quantities May Apply 5.11
Section 5Accessories
Quick Release screw-on couplings. Heavy Duty Series.Made for high pressure applications, they are specially intended for high pressure hydraulic tools where static pressure can reach high values. Interchangeable with the most popular units existing on the market. They can be coupled/uncoupled with the system under pressure. Maximum working pressure 1000bar (14500psi)
PVV Series
Part No. DESCRIPTION
PVVM-38NPT-M Male half coupler 3/8” NPTFPVVM-1/38NPT-F Female half coupler, 3/8” NPTFTFP-38 Dust Cap (Hose Half)TMP-38 Dust Plug (Ram Half)
REPLACEMENTHYDRAULIC HOSE ASSEMBLIESTO SUIT PORTA-POWER UNITS
HOSE ASSEMBLIES690 BAR (10000 PSI) WORKING PRESSURE2:1 SAFETY FACTOR
Part No.
PPH-500PPH-1000PPH-1500PPH-2000PPH-2500PPH-3000PPH-3500PPH-4000PPH-4500PPH-5000PPH-5500PPH-6000PPH-6500PPH-7000PPH-7500PPH-10000PPH-12000PPH-13000PPH-14000PPH-15000
Part No. indicates length in (mm).NB: Quick Release Coupling half not included withhose assembly.
Also available 1/4” NPT at same prices
HOSE HALF RAM HALF
Porta-Power
5.12 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
GROUP
SIZE - OD Jaws Only
Part No.
Std. Duty Complete
Part o.
Med. DutyCompletePart No.mm Inches
Water Pipe
C2
6 1/4"
1/8”GAS1/4"GAS C2S-** C2-** C2-**-M
8 5/16"10 3/8"12
12.7 1/2"
C3
14
1/4"GAS3/8”GAS
C3S-** C3-** C3-**-M1516 5/8"18
C4
19 3/4"
1/2”GAS C4S-** C4-** C4-**-M2022 7/8"2325 1"
C528
3/4”GAS C5S-** C5-** C5-**-M3032 1-1/4"
C6
351”GAS
C6S-** C6-** C6-**-M38 1-1/2"4042 1-1/4"GAS45
C744.5 1 3/4"
C7S-** C7-** C7-**-M48.3 1 1/2"GAS50.8 2"
POLYPROPYLENE CLAMPS
Standard DutyTwo Cap Screws & WasherType C2 - C7
Medium DutyTop Plate and Hex BoltsType C2 - C7
NB: To complete the model code, replace ** with the Size, i.e. 5/8” = 5/8
*Available on Request - Minimum Order Quantities May Apply 5.13
Section 5Accessories
DOUBLE PLATE MULTIPLE PLATE
Part No
Suit Clamp Type
No. Clamp
Part No
Suit Clamp Type
No. Clamp
PD1 C1 2 PM1 C1 10PD2 C2 2 PM2 C2 10PD3 C3 2 PM3 C3 10PD4 C4 2 PM4 C4 10PD5 C5 2 PM5 C5 5PD6 C6 2 PM6 C6 5PD7 C7 2 PM7 C7 5
C2 - 1/8 - GAS - M - PL
Type
Size
GAS = GAS PIPE
(Omit if not applicable)
EXT. Base Plate
(Omit if not required)
Series
S = Standard Duty
M = Medium Duty
ORDERING CODE
Options:- Twin Base Plates, Multiple Base Plates
CLAMP COMPONENTS
SIZE -> C2 C3 C4 C5 C6 C7
DESCRIPTION Part NoPart No
Part No
Part No Part NoPart No
Top Plate PS2 PS3 PS4 PS5 PS6 PS7Base Plate P2 P3 P4 P5 P6 P7
Ext Base Plate PL2 PL3 PL4 PL5 PL6 PL7Cap Screw S-C1/C2 S-C3 S-C4 S-C5 S-C6 S-C7
Washer W W W W W WHex Bolt VE1/2 VE3 VE4 VE5 VE6 VE7
Stacking Bolt VA1/2 VA3 VA4 VA5 VA6 VA7
TRACK MOUNT
Part No Description
BB TrackDF6 NUTDF8 NUT
PD Double Plate PM Multiple Plate
5.14 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
CP3 - 1 1/2 - CS
Type
Size
GAS = GAS PIPE
(Omit if not applicable)
ORDERING CODE
Group Size - OD Heavy DutyJaws OnlyPart No.
Heavy Duty Complete
Modelmm Inches Pipe
CP1
1/4
CP1S-**-CS CP1-**-CS3/8 1/8"GAS1/2 1/4"GAS5/8 3/8"GAS3/4
CP2
20 3/4
CP2S-**-CS CP2-**-CS22 7/8 1/2"GAS25 1 3/4"GAS2830
CP3
30
1 1/41 1/2
CP3S-**-CS CP3-**-CS32 1"GAS42 1-1/4"GAS45
CP4
42
2” CP4S-**-CS CP4-**-CS
45 1"GAS53 1-1/4"GAS54 1-1/2"GAS63 2"GAS65
SIZE -> CP1 CP2 CP3 CP4
Description Part No Part No Part No Part No
Top Plate TP-CP1-CS TP-CP2-CS TP-CP3-CS TP-CP4-CS
Base Plate BP-CP1-CS BP-CP2-CS BP-CP3-CS BP-CP4-CS
Hex Bolt S-CP1-CS S-CP2-CS S-CP3-CS S-CP4-CS
Stacking Bolt VA-CP1 VA-CP2 VA-CP3 VA-CP4
NB: TO COMPLETE THE model Code Replace ** with the Size, i.e. 7/8” = 7/8
Component Pricing
HEAVYWEIGHT SERIES: in polypropylene or self-extinguishing polyamide for pipes from 6 to 324 mm. for metric sizes, from 1/8” to 12" for gas inch sizes, from 1/4” to 8" for English inch sizes. It's recommended for complicated systems, for high pressure and con-siderable oil speed. The upper plates are also supplied in this series. High hexagon head bolts VACP are used in the stacked mounting.
*Available on Request - Minimum Order Quantities May Apply 5.15
Section 5Accessories
CF3 - 1/2 - 1/2 - GAS
Type
Size
GAS = GAS PIPE
(Omit if not applicable)
ORDERING CODE
GROUP
SIZE - ODTWIN CLAMP JAWS ONLY
Part No.
TWIN CLAMP
COMPLETEPart No.
MM Inches Pipe
CF1
6-61/4” - 1/4”3/8” - 3/8”1/2” - 1/2”
CF1S-**-** CF1-**-**8-8
10-1012-12
CF2
14-14
1/2 - 1/25/8 - 5/8
CF2S-**-** CF2-**-**15-15 1/4-1/4GAS16-16 3/8-3/8GAS18-18
CF320-20
3/4” - 3/4”1” - 1”
CF3S-**-** CF3-**-**22-22 1/2-1/2GAS25-25
CF426-26
CF4S-**-** CF4-**-**28-28 3/4-3/4GAS30-30
CF5
33-33
1 1/4” - 1 1/4”1 1/2” - 1 1/2”
CF5S-**-** CF5-**-**35-35 1-1GAS38-38 1-1/4-1-1/4GAS42-42
SIZE -> CF1 CF2 CF3 CF4 CF5
DESCRIPTION Part No Part No Part No Part No Part No
TOP PLATE TP-CF1 TP-CF2 TP-CF3 TP-CF4 TP-CF5
BASE PLATE BP-CF1 BP-CF2 BP-CF3 BP-CF4 BP-CF5
HEX BOLT S-CF1 S-CF2 S-CF3 S-CF4 S-CF5
STACKING BOLT VA-CF1 VA-CF2 VA-CF3 VA-CF4 VA-CF5
NB:To Complete The Model Code Replace **-** With the Size,ie 3/8”-3/8”=3/8-3/8
Component Pricing
5.16 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
HOSE IDG1
1 WIRE NON SKIVEG2
2 WIRE NON SKIVEG4K & G3K
MULTI-SPIRALGMV
SUCTION HOSE
1/4” C3-1/4GAS (14mm) C3-15 (15mm) - -3/8” C3-3/8GAS (17mm) C3-18 (18mm) C4-20 (20mm) -1/2” C4-20 (20mm) C4-22 (22mm) C4-23 (23mm) -5/8” C4-23 (23mm) C4-25 (25mm) C5-28 (28mm) -3/4” C5-28 (28mm) C5-30 (30mm) C5-30 (30mm) C5-32 (32mm)
1” C6-35 (35mm) C6-38 (38mm) C6-38 (38mm) C6-38 (38mm)1 1/4” C6-42 (42mm) C7-48.3 (48.3mm) C7-48.3 (48.3mm) C6-45 (45mm)1 1/2” C7-50.8 (50.8mm) C7-54 (54mm) C7-54 (54mm) C7-50.8 (50.8mm)
2” CP4-65-CS (65mm) CP4-65-CS (65mm) CP4-65-CS (65mm) CP4-2-1/2-CS
PIPE CLAMP SELECTION CHARTTO SUIT HYDRAULIC HOSE
Clamp is nearest possible to hose OD
*Available on Request - Minimum Order Quantities May Apply 5.17
Section 5Accessories
S Series/Inline 3000 psi/full flow High pressure hydraulic swivel joints
MALE JIC TO MALE NPT
MALE JIC TO FEMALE JIC
FEMALE NPT TO MALE NPT
FEMALE NPT TO FEMALE NPT
Part No.Barrel
Thread JICStem
Thread NPTS6J6-P4 9/16-18 1/4"
S8J10-P8 7/8-14 1/2"
S8J12-P12 1 1/16-12 3/4"
S16J16-P16 1 5/16-12 1"
S20J20-P20 1 5/8-12 1 1/4"
Part No.Barrel
Thread JICStem
Thread JICS6J6-JF6 9/16-18 9/16-18
S6J8-JF8 3/4-16 3/4-16
S8J10-JF10 7/8-14 7/8-14
S8J12-JF12 1 1/16-12 1 1/16-12
S16J16-JF16 1 5/16-12 1 5/16-12
*S20J20-JF20 1 5/8-12 1 5/8-12
*S24J24-JF24 1 7/8-12 1 7/8-12
Part No.BarrelThread
NPT
StemThread NPT
S6PF4-P4 1/4" 1/4"
S6PF6-P6 3/8" 3/8"
S8PF8-P8 1/2" 1/2"
S8PF8-P12 1/2" 3/4"
S8PF12-P12 3/4" 3/4"
S16PF16-P16 1" 1"
Part No.BarrelThread
NPT
StemThread NPT
S6PF4-PF4 1/4" 1/4"
S6PF6-PF6 3/8" 3/8"
S8PF8-PF8 1/2" 1/2"
S8PF12-PF12 3/4" 3/4"
S16PF16-PF16 1" 1"
5.18 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
9S Series/90° 3000 psi/Pressure balanced High pressure hydraulic swivel joints
MALE JIC TO MALE JIC
MALE JIC TO MALE NPT
MALE JIC TO FEMALE NPT
MALE JIC TO MALE O’RING
Part No.Barrel
Thread JICStem
Thread JIC9S6J6-J6 9/16-18 9/16-18
9S6J8-J8 3/4-16 3/4-16
9S8J10-J10 7/8-14 7/8-14
9S12J12-J12 1 1/16-12 1 1/16-12
9S16J16-J16 1 5/16-12 1 5/16-12
9S20J20-J20 1 5/8-12 1 5/8-12
Part No.Barrel
Thread JICStem
Thread NPT9S6J6-P6 9/16-18 3/8"
9S6J8-P6 3/4-16 3/8"
9S6J8-P8 3/4-16 1/2"
9S8J10-P8 7/8-14 1/2"
9S12J12-P12 1 1/16-12 3/4"
9S16J16-P16 1 5/16-12 1"
9S20J20-P20 1 5/8-12 1 1/4"
Part No.Barrel
Thread JICStem
Thread NPT9S6J6-PF6 9/16-18 3/8"
9S6J8-PF6 3/4-16 3/8"
9S6J8-PF8 3/4-16 1/2"
9S8J10-PF8 7/8-14 1/2"
9S12J12-PF12 1 1/16-12 3/4"
9S16J16-PF16 1 5/16-12 1"
Part No.Barrel
Thread JICStem
Thread UNO9S6J6-O6 9/16-18 9/16-18
9S6J6-O8 9/16-18 3/4-16
9S6J8-O8 3/4-16 3/4-16
9S8J10-O10 7/8-14 7/8-14
9S12J12-O12 1 1/16-12 1 1/16-12
9S16J16-O16 1 5/16-12 1 5/16-12
9S20J20-O20 1 5/8-12 1 5/8-12
*Available on Request - Minimum Order Quantities May Apply 5.19
Section 5Accessories
9S Series/90° 3000 psi/Pressure balanced High pressure hydraulic swivel jointsFEMALE NPT TO MALE NPT
SEAL KITSS-Series
Seals as listed contain Dust and Fluid Seals with Retaining Rings, Balls and Plugs as applicable.
9S-Series
Part No.BarrelThread
NPT
StemThread NPT
9S6PU4-P4 1/4" 1/4"
9S6PU6-P6 3/8" 3/8"
9S8PU8-P8 1/2" 1/2"
9S12PU12-P12 3/4" 3/4"
9S16PU16-P16 1" 1"
9S20PU20-P20 1 1/4" 1 1/4"
Body SizeKit No.
S6S6-1
S8S8-1
S16S16-1
S20S20-1
S24S24-1
Body SizeKit No.
9S69S6-1
9S89S8-1
9S129S12-1
9S169S16-1
9S209S20-1
5.20 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
Part No.Barrel
BSPP-FStem
BSPP-MSpeedRPM
M.W.P.bar
Max. Flowl/min
GGIL01 1/4" 1/4" 500 400 25
GGIL02 3/8" 3/8" 400 400 45
GGIL03 1/2" 1/2" 370 360 80
GGIL04 3/4" 3/4" 280 310 120
GGIL05 1" 1" 230 280 150
GGIL06 1-1/4" 1-1/4" 200 250 200
GGIL07 1-1/2" 1-1/2" 170 210 250
GGIL09 2" 2" 140 180 300
Part No.Barrel
BSPP-FStem
BSPP-MSpeedRPM
M.W.P.bar
Max. Flowl/min
GG9001 1/4" 1/4" 500 400 25
GG9002 3/8" 3/8" 400 400 45
GG9003 1/2" 1/2" 370 360 80
GG9004 3/4" 3/4" 280 310 120
GG9005 1" 1" 230 280 150
GG9006 1-1/4" 1-1/4" 200 250 200
GG9007 1-1/2" 1-1/2" 170 210 250
GG9009 2" 2" 140 180 300
MTC Rotary CouplingsRotary couplings are used to connect two hydraulic lines that are moving simultaniously in different directions. Rotations can either be alternating or continuous.These couplings rotate on roller bearings and provide a perfect seal via special low friction seals. They can rotate under maximum pressure with low torque.
NB: When required - order separately a dowty seal to suit the BSPP threads (eg R04B-08). Ref page 4.42 of this catalogue
90° Coupling
Part No.GAUGE TYPE
HOSE LENGTH(inches)
LOW PRESSURE GAUGE*
RANGE(psig)
MEDIUM PRESSURE GAUGE
RANGE(psig)
HIGH PRESSURE GAUGE
RANGE(psig)Net Price
03-740-019 Std. 36 0-150 0-600 0-5000
PRESSURE TESTING DEVICES FOR HYDRAULIC, AIR AND VACUUM SYSTEMS* Includes bleeder screw and convenient hanger* Built-in pressure sensor protects low range gauges from high pressure* Compatible with most hydraulic fluids* Continuous system pressure readings are possible through pressure ranges 0-5000 PSI.
Inline Coupling
*Available on Request - Minimum Order Quantities May Apply 5.21
Section 5Accessories
Gauge AdaptorsPart No. THREAD THREAD
CP20-0407G 1/4"BSPP-F 7/16"JIC-MCP20-0409G 1/4"BSPP-F 9/16"JIC-MCP20-0809G 1/2"BSPP-F 9/16"JIC-MCP28-0409G 1/4"BSPP-F 9/16"JIC-FCS25-0707 7/16"JIC-F 7/16"JIC-F
Part No.PORTBSPP
MAX. PRESSURE
BARTYPE
EMIL01A 1/4” 250 A 180°EM9001A 1/4” 250 A 90°HB1-PA 1/4" 400 Push To Read
Panel Mount - Rear Entry - Dual Scale
63mm Diameter - Connection = 1/4” BSPP
Part No. Diam BAR PSI
PG63PM-010 63 10 150
PG63PM-060 63 60 850
PG63PM-100 63 100 1450
PG63PM-160 63 160 2300
PG63PM-250 63 250 3600
PG63PM-400 63 400 5800
100mm Diameter - Connection = 1/2” BSPP
PG100PM-010 100 10 150
PG100PM-060 100 60 850
PG100PM-100 100 100 1450
PG100PM-160 100 160 2300
PG100PM-250 100 250 3600
PG100PM-400 100 400 5800
Line Mount - Bottom Entry - Dual Scale
63mm Diameter - Connection = 1/4"BSPP
Part No. Diam BAR PSI
PG63BE-010 63 10 150
PG63BE-060 63 60 850
PG63BE-100 63 100 1450
PG63BE-160 63 160 2300
PG63BE-250 63 250 3600
PG63BE-400 63 400 5800
PG63BE-600 63 600 8700
PG63BE-BOOT PROTECTIVE BOOT
100mm Diameter - Connection = 1/2” BSPP
PG100BE-010 100 10 150
PG100BE-060 100 60 850
PG100BE-100 100 100 1450
PG100BE-160 100 160 2300
PG100BE-250 100 250 3600
PG100BE-400 100 400 5800
PG100BE-600 100 600 8700
PG100BE-BOOT PROTECTIVE BOOT
Line Mount - Bottom Entry - Digital - 1/4"BSPP
PG80BE-700 80 700 10150
PG80BE-BOOT PPROTECTIVE BOOT
Pressure Gauge Isolators
EM9001A
BOTTOM ENTRY
EMIL01A
GLYCERINE FILLEDDUAL SCALE
HB1-PA
Gauge Protective Boot
Digital
Part No. DiameterPG63BE-BOOT 63MMPG100BE-BOOT 100mmPG80BE-BOOT 80mm
Digital
Panel Mount(Inc’s Panel Mt Kit)
5.22 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
Part No. Style THREADA
THREADB
M.W.P. (BAR)
620.08.204.00.1 1 1/4" BSPP-F M16 X 2 (M-B/HD) 630
620.08.208.00.1 1 1/2" BSPP-F M16 X 2 (M-B/HD) 630
620.09.204.00.1 2 1/4" BSPP-F M16 X 2 (F) 630
620.09.208.00.1 2 1/2" BSPP-F M16 X 2 (F) 630
TEST POINT COUPLNG ‘A’ TYPE M16X2 SERIES
Part No. MALETHREAD
M W PBAR
620.01.202.23 1/8” BSPP 400
620.01.204.23 1/4” BSPP 630
620.01.206.23 3/8"BSPP 630
620.01.202.33 1/8” BSPT 400
620.01.204.33 1/4” BSPT 630
620.01.206.33 3/8"BSPT 630
620.01.302.33 1/8” NPT 400
620.01.304.33 1/4” NPT 630
620.01.404.03 7/16” UNO 630
620.01.406.03 9/16” UNO 630
620.01.010.23 M10x1 400
620.01.012.23 M12x1.5 630
620.01.014.23 M14x1.5 630
620.01.016.23 M16x1.5 630
Part No. FEMALETHREAD
M W PBAR
620.07.204.83 1/4"BSPP-F 630
620.05.404.03 7/16”JIC-F 345
620.05.406.03 9/16”JIC-F 345
620.05.408.03 3/4"JIC-F 345
HOSE ASSEMBLIES 630BAR MWP
Part No.(includes length in mm)
64-10.162-50.204-20064-10.162-50.204-30064-10.162-50.204-40064-10.162-50.204-50064-10.162-50.204-60064-10.162-50.204-800
64-10.162-50.204-100064-10.162-50.204-150064-10.162-50.204-200064-10.162-50.204-250064-10.162-50.204-3000
TEST POINTS - M16X2 (Test 20) SERIES
NB: The listed hose assemblies have the 10.162 cou-pling at one end, and the 50.204 coupling at the other.For other options delete the listed codes from the model number and add the code for the desired thread type.Use an add & subtract to the list price for pricing.
TEST POINT TO GAUGE ADAPTORS
A
TEST POINT HOSES 2mm ID
64 - 10.162 - 50.204 - 200
A B C L
B
Style 2Style 1
HOSE & COUPLING OPTIONS
Part No. THREAD
6400 DN2 Hose 2mm ID 800.00.002.00 Ferrule801.10.162.00 M16X2 (Test 20) 801.60.204.00 1/4"BSPP-F (60° Seat)801.50.204.00 1/4” BSPP-F(gauge)801.54.204.00 1/4"BSPP-F-90°(gauge)801.50.208.00 1/2” BSPP-F801.60.404.00 7/16” JIC-F801.60.406.00 9/16” JIC-F
MWP = 630 bar
NB: Use the highlighted part of the coupling Part No. in the hose assembly Part No.
*Available on Request - Minimum Order Quantities May Apply 5.23
Section 5Accessories
TEST POINT TEES
DF04-1/14SAE-M 620.01.404.03 C77-07
Southcott test point tees provide a convenient method oftaking pressure readings from any point in a hydraulic system.Compact in size, they can be fitted as a temporary orpermanent installation at a cost-effective price.
USA Test Point
European Test Point
Test 20
JIC
Part No.Male
ThreadFemaleThread
Test Point Thread
C27G-070707 7/16" JIC-M 7/16" JIC-F 7/16" UNO-FC27G-090907 9/16" JIC-M 9/16" JIC-F 7/16" UNO-FC27G-121207 3/4" JIC-M 3/4" JIC-F 7/16" UNO-FC27G-141407 7/8" JIC-M 7/8" JIC-F 7/16" UNO-FC27G-171707 1-1/16" JIC-M 1-1/16" JIC-F 7/16" UNO-FC27G-212107 1-5/16" JIC-M 1-5/16" JIC-F 7/16" UNO-FC27G-262607 1-5/8" JIC-M 1-5/8" JIC-F 7/16" UNO-F
BSPP
Part No.Male
ThreadFemaleThread
Test Point Thread
CP24G-040407 1/4" BSPP-M 1/4" BSPP-F 7/16" UNO-FCP24G-060607 3/8" BSPP-M 3/8" BSPP-F 7/16" UNO-FCP24G-080807 1/2" BSPP-M 1/2" BSPP-F 7/16" UNO-FCP24G-121207 3/4" BSPP-M 3/4" BSPP-F 7/16" UNO-FCP24G-161607 1" BSPP-M 1" BSPP-F 7/16" UNO-FCP24G-202007 1-1/4" BSPP-M 1-1/4" BSPP-F 7/16" UNO-F
ORFS
Part No.Male
ThreadFemaleThread
Test Point Thread
F27G-111107 11/16" UNF-M 11/16" UNF-F 7/16" UNO-F
F27G-131307 13/16" UNF-M 13/16" UNF-F 7/16" UNO-FF27G-161607 1" UNF-M 1" UNF-F 7/16" UNO-FF27G-191907 1-3/16" UNF-M 1-3/16" UNF-F 7/16" UNO-FF27G-232307 1-7/16" UNF-M 1-7/16" UNF-F 7/16" UNO-FF27G-272707 1-11/16" UNF-M 1-11/16" UNF-F 7/16" UNO-F
TEST POINT HOSES 4mm ID
67 - 10.162 - 60.204 - 200
A B C L
Port Plug
HOSE & COUPLING OPTIONS
Part No. THREAD
6700 DN4 Hose 4mm ID800.00.004.00 Ferrule804.10.162.00 M16X2 (Test 20) 804.60.204.00 1/4” BSPP-F (60° Seat)804.50.204.00 1/4” BSPP-F(gauge)804.80.302.00 1/8"NPT-Male804.60.404.00 7/16” JIC-F804.60.406.00 9/16” JIC-F
MWP = 500 bar
NB: Use the highlighted part of the coupling Part No. in the hose assembly Part No.
5.24 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
HYDRAULIC TUBE
SIZE
WORKING PRESSURE
WITH 3:1 SAFTY FACTOR
WallDim.
WEIGHT PER
Length
UNPLATEDPer 6.1M Length
GOLD ZINC PLATEDPer 6.1M Length
OD(Inches) x GAUGE
BAR PSI mm Kg Part No Part No
1/4” x 20g x 6.0m 311 4512 0.91 0.73 T0420 T0420P
3/8” x 16g x 6.0m 369 5348 1.63 1.94 T0616 T0616P
3/8” X 18g x 6.0m 277 4011 1.22 1.53 T0618 T0618P
1/2” x 16g x 6.0m 277 4011 1.63 2.75 T0816 T0816P
1/2" x 18g x 6.0m 207 3008 1.22 2.10 T0818 T0818P
5/8” x 14g x 6.0m 277 4011 2.03 4.23 T1014 T1014P
5/8” x 16g x 6.0m 221 3209 1.63 3.48 T1016 T1016P
3/4" x 12g x 6.0m 299 4342 2.64 6.51 T1212 T1212P
3/4” x 14g x 6.0m 230 3342 2.03 5.19 T1214 T1214P
3/4” x 16g x 6.0m 184 2674 1.63 4.27 T1216 T1216P
1” x 10g x 6.0m 277 4011 3.25 10.83 T1610 T1610P
1” x 12g x 6.0m 236 3415 2.77 9.04 T1612 T1612P
1” x 14g x 6.0m 173 2507 2.03 7.14 T1614 T1614P
1” x 16g x 6.0m 138 2005 1.63 5.83 T1616 T1616P
1.1/4” x 10g x 6.0m 221 3209 3.25 13.93 T2010 T2010P
1.1/2” x 10g x 6.0m 184 2674 3.25 17.02 T2410 T2410P
2” x 7g x 6.0m 190 2757 4.47 31.17 T3207 N/A
NB: Pricing per 6.0m length.
Cold Drawn Seamless Tube - Annealed ASTM A1796.0m LengthsSupplied in Full Lengths Only.Other Sizes and Gauges are Available on Request
NB: The above working pressure rating is based on “BARLOWS” Formula P = 2ST/D Where P = Burst Pressure (PSI) S = UTS (47000) T = Wall Thickness (inches) D = O.D. of tube (inches)
*Available on Request - Minimum Order Quantities May Apply 5.25
Section 5Accessories
FLARELESSTUBE COMPRESSION FITTINGS
INITIAL ASSEMBLY
1. Cut the tube squarely and deburr the end internally and externally. Clean all dirt and grit from I.D. and O.D.
2. Slide the nut and then the sleeve on to the tube. Make sure the tapered end of the sleeve points toward the nut.
3. Lubricate all mating surfaces of nut, sleeve and body with heavy lubricant.
4. Place end of tube against standard J.I.C. 37 Degree flare body.
5. Slide the sleeve and nut against body and tighten the nut onto the body “hand Tight”. Mark the nut in relation to the body for loca-tion.
6. Hold tube against body and tighten nut total of 1-1/4 turns for sizes 1/4" to 5/8" and 1-1/2 turns for sizes 3/4" to 1-1/4"
REASSEMBLY
1. Slide nut against the body and tighten to “Hand Tight”. Mark the nut for location.
2. Tighten nut a minimum of one “Hex” flat. The Versa flare Flareless Tube fitting is designed for 10 reassemblies.
Assembly Instructions
TUBE O.D. JIC THREAD NUT SLEEVE
1/4” 7/16” VN-04 VS-04
3/8” 9/16” VN-06 VS-06
1/2” 3/4” VN-08 VS-08
5/8” 7/8” VN-10 VS-10
3/4” 1 1/16” VN-12 VS-12
1” 1 5/16” VN-16 VS-16
1 1/4” 1 5/8” VN-20 VS-20
5.26 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
Part No.Adjustment
Range
Suits HoseType
SP17-19
SP19-21
SP21-23
SP23-25
SP25-27
SP27-29
SP29-31 PROS19
SP31-34 12GMV
SP34-37 16GMV PROS25
SP37-40
SP40-43 PROS32
SP43-47 20GMV
SP47-51 24GMV PROS38
SP51-55
SP55-59
SP59-63 PROS51
SP63-68 32GMV
SP68-73
SP73-79 40GMV
SP79-85
SP85-91 48GMV
SP91-97
SP97-104 56GMV
SP104-112
SP112-121
SP121-130
SP130-140
SP140-150
SP150-162
SP162-174
T-BoltClamps
Stainless Steel Band & Zinc Plated Bolt & Trunnion
Supra W2 Clamps
Mikalor
Part No. SIZESuits Hose
Type3223 23-25
3226 26-28
3229 29-31 PROS19
3230 30-33 12GMV
3232 32-35 PROS25
3236 36-39 16GMV
3240 40-43 PROS32
3244 44-47 20GMV
3248 48-51 24GMV PROS38
3250 50-53
3252 52-55
3256 56-59
3260 60-63 PROS51
3262 62-65 32GMV
3264 64-67
3268 68-73
3274 74-79 40GMV
3280 80-85
3286 86-91 48GMV
3292 92-97
3298 98-103 56GMV
Stainless Steel Band & Zinc Plated Bolt & TrunnionSizes up to 304mm available on request
*Available on Request - Minimum Order Quantities May Apply 5.27
Section 5Accessories
Micro-Gear Small Diameter ClampsBand and housing in 201/301 stainless steel. Band width 5/32"1¼" hex head plated carbon steel screw.NB: Sold in Box quantities of 10 Clamps
Automotive General PurposeBand and housing in 201/301 stainless steel. Band width 1/2"5/16" hex head plated carbon steel screwNB: Sold in Box quantities of 10 Clamps
Pipe Retaining Clamp(P Clamp)Commonly used for retaining pipes,hoses, cables, tubing etc. The rubber liner absorbs vibration and also protects the product.NB: Sold in Box quantities of 5 Clamps
Part No.
Clamping Range
Imperial (in.)Metric (mm)
Min Max Min Max6204 1/4 5/8 6 16
6206 5/16 7/8 8 22
Part No.
Clamping Range
Imperial (in.) Metric (mm)
Min Max Min Max5706 3/8 7/8 10 22
5708 5/16 7/8 8 22
5710 1/2 1 1/16 13 27
5712 1/2 1 1/4 13 32
5716 11/16 1 1/2 18 38
5720 3/4 1 3/4 19 44
5724 1 2 25 51
5728 1 1/4 2 1/4 32 57
5732 1 1/2 2 1/2 38 63
5736 1 3/4 2 3/4 44 70
5740 2 3 51 76
5744 2 1/4 3 1/4 57 82
5748 2 1/2 3 1/2 64 89
5752 2 3/4 3 3/4 70 95
5756 3 4 76 101
5760 3 1/4 4 1/4 83 108
5764 2 1/2 4 1/2 64 114
5772 3 5 76 127
5780 3 1/2 5 1/2 89 140
5788 4 6 102 152
5796 4 1/2 6 1/2 114 165
Part No.Diam (mm)
Band Width (mm)
Mounting Hole(mm)
800415 4 15 6
800615 6 15 6
800915 9 15 6
801015 10 15 6
801215 12 15 6
801315 13 15 6
801515 15 15 6
801615 16 15 6
801815 18 15 6
801915 19 15 6
802015 20 15 6
802215 22 15 6
802515 25 15 6
802715 27 15 6
802915 29 15 6
803215 32 15 6
803515 35 15 6
803815 38 15 6
804015 40 15 6
804515 45 15 6
804815 48 15 6
805115 51 15 6
805515 55 15 6
805715 57 15 6
806015 60 15 6
806415 64 15 6
806615 66 15 6
807015 70 15 6
800816 8 16 10
800916 9 16 10
801016 10 16 10
801316 13 16 10
801516 15 16 10
801616 16 16 10
801816 18 16 10
801916 19 16 10
802016 20 16 10
802216 22 16 10
802516 25 16 10
802716 27 16 10
802916 29 16 10
803216 32 16 10
803516 35 16 10
803816 38 16 10
805116 51 16 10
CLAMPS
5.28 *Available on Request - Minimum Order Quantities May Apply
Section 5Accessories
Part No. Clamp Range (mm)
SB15 12.7 - 17.5SB19 17.5 - 20.6SB22 20.6 - 23.8SB25 23.8 - 27.0SB29 27.0 - 30.2SB34 30.2 - 38.1SB41 38.1 - 44.5SB48 44.5 - 50.8SB54 50.8 - 57.1SB60 57.1 - 63.5SB67 63.5 - 69.9SB73 69.9 - 76.2SB79 76.2 - 82.6SB86 82.6 - 88.9SB90 88.9 - 92.1
POWERGRIP™ SHRINKBAND CLAMPSIdeal for use with TexSleeve hose protection
*An industrial heatgun is required
*Available on Request - Minimum Order Quantities May Apply 5.29
Section 5Accessories
SWAGING MACHINES & CUT-OFF SAWS
CS125 CS132Up to 1" 2-wire Up to 1¼" 4-wire
CS150 CS250Up to 2" 4-wire Up to 2" 6-wire
12V or 24V DC 240V or 415V ACCut-off Saws
For the full range of Child Swaging Machines and Accessories please contact your nearestChild Distributor
5.30
Warranty
The Company warrants that the products sold by it shall be free from defects in either material or manufacture and will,provided written request to do so is made within 30 days after delivery, either repair or replace, at its option, items shown tothe Company’s satisfaction to have been defective at the time of delivery.
This warranty comprises the sole and entire warranty pertaining to the Company’s products and other terms, conditions orwarranties, including but not limited to merchantability and fitness for any particular purpose, whether expressed or implied,are hereby excluded to the fullest extent permitted by law.
No warranty is given on components made to other than the Company’s design and is void on any product evidencing alterationfrom the Company’s manufacturing specification.
The Company liability under any statutory provision is limited to the repair, replacement or provision of any equivalentproduct, at its option.
Except to the extent liability cannot by law be excluded or limited, the Company does not under any circumstances whatsoeveraccept liability for any contingent cost or consequential losses or any other liability whatsoever (except that under the aboveterms) which may in any way arise in the use of its products or any defect occurring in them.
Technical information has been prepared from actual test results and is considered reliable but no responsibility can bepresumed for its accuracy under varied field conditions.
Child hose couplings are designed and manufactured to suit the nominated Gates or Child branded hose and are to be assembledstrictly in accordance with instructions issued by the Company.
The use of non-specified hose or assembly other than to Company instructions may produce an unsatisfactory and hazardousproduct. Warranty is void in such instances and any liability, expressed or implied, is totally disclaimed.
The Company does not warrant the performance of weld-type adaptors, once welded (except by the Company, its servants orits selling agents). These welded products should be tested and proved fit for the use intended. Not testing, not proving, faultyfabrication or faulty welding may result in an unsatisfactory or even dangerous product.
Suggestions on application, installation and care of the product are offered by the Company only as a guide to best practice anddo not add to or otherwise vary the terms of the warranty.
The Company’s technical reference manuals provide dimensional and technical specifications to assist in the correct selectionand application of Child and Gates products. Because of technological progress and product improvement, all design anddimensional data shown in this product guide is subject to change without notice.
MELBOURNEUnit 5, 4 Federation Way
Chifley Industry ParkMoorabbin Airport
MENTONE, VIC 3194Telephone (03) 8551 0500
Fax (03) 8551 0508Email: [email protected]
BRISBANE45 Fulcrum Street
RICHLANDS QLD 4077Telephone (07) 3375 4499
Fax (07) 3375 4488Email: [email protected]
PERTH1/1110 Abernethy Rd & DundasHIGH WYCOMBE WA 6057Telephone (08) 9454 9311
Fax (08) 9454 9366Email: [email protected]
SYDNEY1/1A Gibbon Road
BAULKHAM HILLS NSW 2153Telephone (02) 9838 9033
Fax (02) 9838 9133Email: [email protected]
ADELAIDERegistered Head Office
243 Halifax StreetADELAIDE SA. 5000
Telephone (08) 8228 2411Fax (08) 8223 3413
Email: [email protected]
EMERALD77 Macauley Access Road
EMERALD QLD 4720Telephone (07) 4988 1800
Fax (07) 4982 0280Email: [email protected]
CHILD MANUFACTURINGWINGHAM NSW
TAREE NSW
NEWCASTLE4/14 Yangan Drive
BERESFIELD NSW 2322Telephone (02) 4964 2123
Fax (02) 4964 2235Email: [email protected]
ADELAIDESouthcott Manufacturing
Athol ParkADELAIDE SA
LAVERTON1/9 Everaise Court
LAVERTON NTH, VIC 3026Telephone (03) 9371 9000
Fax (03) 9360 0484Email: [email protected]
DEVONPORTLot 4, 6183 Frankford RoadWESLEY VALE, TAS 7307Telephone (03) 6427 0908
Fax (03) 6427 0522Email: [email protected]
ABN 27 007 870 662
Office Locations
MACKAY10/30-36 Margaret Vella Drive
PAGET QLD 4740Telephone (07) 4952 4056
Fax (07) 4952 4367Email: [email protected]