Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Engineered Performance
Series CBV 2500 Control Ball ValvesHigh Performance, High Value: Bubble-tight sealing, precise control and low cost of ownership
The Series CBV 2500 V-notch control ball valve is designed to provide long, trouble-free service life and high quality at a reasonable price. Delivering superior flow control and positive shutoff (exceeds Class VI), the Series CBV 2500 is more compact, lighter weight and costs much less than comparable globe valves. With Cv curves greater than competitive valves, the Series CBV 2500 has the widest control range in its class.
Typical Applications:The Series CBV 2500 provides throttling or on/off operation for a broad range of applications:
Flow Control Upstream to downstream (crude oil, salt water, natural gas)
Oil & Gas Upstream to midstream (crude Gathering Service oil, salt water, natural gas)
Gas Plant Service Upstream to midstream (natural gas)
Oil Storage & Upstream to midstream (crude oil) Transmission Service
Compressor Suction Midstream (natural gas) Control
Clean Fluids With Wide assortment of applications Entrained Solids and fluids
Features / Benefits Unique valve seat design – including a mirror-finish V-ball – provides consistently high sealing capability over the entire service life
Adjustable valve shaft packing for simple field maintenance
‘Anti-blowout’ valve shaft enhances safety by preventing shaft ejection under pressure
Internal travel stops at full open and full closed eliminate valve misalignment
ISO 5211 mounting pad allows easy actuator positioning and installation
High-quality investment castings reduce turbulence in flow
Trunnion mounted full (not segmented) V-ball
• Withstands higher pressure drops
• Lowers shaft fatigue• Improves performance
and service life• Minimizes operating
torque
Patent No.US D726,876 SUS D726,877 S
Contents 2 Applicable
Standards
2 Specifications
2 Flow Coefficients (Cv)
3 Materials of Construction/Parts List
4 Model Code
2 Specifications
Differential Pressure (psi)
Valve Size Pressure Class
0 (0 Mpa)
145 (1 Mpa)
285 (2 Mpa)
435 (3 Mpa)
580 (4 Mpa)
740 (5 Mpa)
1000 (6.8 Mpa)
1480 (10.2 Mpa)
3 150 396 570 750 X X X X X
3 300 396 570 750 923 1073 1275 X X
3 600 396 570 750 923 1073 1275 1673 2400
4 150 810 1170 1530 X X X X X
4 300 810 1170 1530 1740 1950 2160 X X
4 600 810 1170 1530 1740 1950 2160 2700 3600
6 150 1890 2070 2250 X X X X X
6 300 1890 2070 2250 2700 3150 3600 X X
6 600 1890 2070 2250 2700 3150 3600 6975 X
Size ANSI 150 CL ANSI 300 CL* ANSI 600 CL
3” 285 750 1480
4” 285 750 1480
6” 285 750 1000
Maximum Differential Pressure (psi)
*300/600 CL Wafer Valves are rated to 600 CL dP rating.
Operating Storage
-50°F to 450°F (-46°C to 232°C) -50°F to 160°F (-46°C to 71°C)
TemperatureSize
Degrees of Rotation
10 20 30 40 50 60 70 80 90
3” 0.08 4.76 16.5 34.0 61 101 168 255 354
4” 0.71 9.38 28.9 60.5 104 172 289 503 828
6” 0.68 11.4 41.4 87.3 156 265 429 693 1212
Flow Coefficients (Cv)
Operating Torques in lbf*in
Applicable Standards ASME B16.34 Valves – Flanged, Threaded, and Welding End ISA-S75.04 Face-to-Face Dimensions for Flanged, Flangeless Rotary Control Valves ASME B16.5 Pipe Flanges and Flanged Fittings: NPS ½ Through NPS 24 ISO 5211:2001 Industrial Valves – Part-turn Actuator Attachment API-598 Valve Inspection and Testing
NACE MR0175-2002 Sour Service Capability
Field Control AccessoriesSeries CBV 2500 Control Ball Valves combine with Norriseal Series 2G pneumatic actuators and optional SmartPredictor™ positioners to provide reliable and accurate throttling or On/Off control for a broad range of applications.
Series 2G Pneumatic Actuators Designed for on/off or throttling service (when used with a positioner). Available in four size ranges with torque output to 17,000 in. lbs.
SmartPredictor™ Positioners An intelligent positioner built for linear and rotary actuators. Reduces maintenance requirements, improves diagnostics, and simplifies operation and programming.
Series 73 Filter Regulators Economical air filter regulator that delivers clean, accurate air pressure to instruments, valves and other automatic process control equipment. Durable construction and standard, baked-epoxy paint finish offer long-lasting corrosion protection in harsh environments.
3Materials of Construction & Part List (Flanged or Wafer)
Valve SizeDimensions (in)
Weight (lb)A B C D E F G H J K L
Face-to-Face M N P R
3”-300 FL, 2G13 2.31 1.25 8.50 25.44 12.50 4.50 8.25 2.09 2.31 4.95 6.50 8.18 12.71 5.00 7.75 155
4”-300/600 W, 2G13 2.31 1.25 8.50 25.44 12.50 4.50 6.25 2.09 2.31 5.59 7.63 10.35 16.10 6.25 8.85 154
6”-300/600 W, 2G15 2.31 1.25 8.50 44.34 20.05 5.25 8.63 2.09 2.31 4.35 9.00 12.55 20.05 8.63 11.75 286
12345678910111213141516
12345678910111213141516
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
I
J
1.25 B A 2.442.09 H
6.25 C
16.10 D
J 2.44
8.18 M
13.06 N
4.95 K
8.25 G
6.53 L
1.41F
9.50 E
P 5.00
7.75 R
REV DESCRIPTION DCN BY APPR ZONE- - - - - -
CONFIDENTIAL THIS DOCUMENT AND ALLINFORMATION CONTAINED
IN THIS DOCUMENT ARE THECONFIDENTIAL AND PROPRETARY
PROPERTY OF NORRISEAL,MAY NOT BE USED, COPIED
OR DISCLOSED WITHOUTTHE CONSENT OF NORRISEALOR OUTSIDE THE SCOPE OF
ANY CONSENT OF NORRISEAL AND MUST BE RETURNEDALONG WITH ANY COPIES
ON DEMAND.
ALL DIMENSIONS IN INCHESREMOVE BURRS AND BREAK EDGES TITLE
TOLERANCES NOT NOTED VBALL, FAIL CLOSEDCORNER RADIIBREAK EDGESDECIMAL (2 PLCS.)DECIMAL (3 PLCS.)CONCENTRICITYMACHINE SURFACEANGLES .5
125 RMS.010 TIR
.005
.015.015 X 45
.03 MAX
CAD DRAWN - -
PROJECT NO. SCALE DCN RELEASE NO. CHECKED - - SIZE DRAWING NUMBER REV
D-320 0.500 - APPROVED - - D VBALL-FAIL-CLOSE
PART NO. MAKE FROM DESCRIPTION FINISH MATLIDENT WEIGHT
- - - - - -
SCALE 0.620
E
F
P
R
H JK
L
G
Items Dimension Material QTY (3”)
QTY (4”)
QTY (6”)
1 Bushing 3”, 4”: Steel/Bronze/MPTFE;6”: 316 SS Nitrided 1 1 2
2 Washer 302 SS - - 1
3 Seat Spacer 316 SS 1 1 1
4 Belleville Washer 17-7PH SS 2 2 2
5 Bearing Nitronic 60, Nitrided 1 1 1
6 Bearing Sleeve Nitronic 60 1 1 1
7 Gasket MPTFE 1 1 1
8 Seat PPS/Carbon/Moly-filled PTFE 1 1 1
9 Shaft 17-4PH SS 1 1 1
10 Spring Plate 302 SS 1 1 1
11 Shaft Packing Graphite/Carbon-filled PTFE 1 1 1
12 Trunnion 17-4PH SS 1 1 1
13 Wave spring 17-7PH SS 1 1 1
14 Ball Ni Plated 410 SS 1 1 1
15 Shaft Adapter 440C SS 1 1 1
16 Body ASTM A216, GR-LCC 1 1 1
17 End Body ASTM A216, GR-LCC 1 1 1
18 Gasket Spring Loaded MPTFE 1 1 1
19 Gasket Spring Loaded MPTFE 1 1 1
20 Bolt Steel 4 4 4
21 Bolt Steel 8 6 6
22 Bolt Steel 4 4 4
23 Set Screw Steel - 2 2
12345678910111213141516
12345678910111213141516
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
I
J
ITEM DESCRIPTION MATERIAL PART NO. DRAWING NO. QTY.
1 SS 1095464 2
2 SS 1096045 1
3 1095803 1
4 1096366LIN-1 2
5 BEARING SS 1095462 1
6 BEARING SLEEVE SS 1095799 1
7 GASKET PLASTIC_PTFE 1096674 1
8 SEAT PLASTIC_PTFE 1096677 1
9 SHAFT SS 1098392 1
10 SPRING PLATE SS 1096044 1
11 STEM PACKING 1096681 1
12 TRUNNION SS 1095794 1
13 WAVE SPRING SS 1096685 1
14 SS 1094687 1
15 SS 1095806 1
16 STEEL 1095265 1
17 STEEL 1095266 1
18 1096666 1
19 1096671 1
20 CSDD292 4
21 CSEE415 6
22 MSE510 4
23 SW05100 2
TITLE
CBV BODY S/A06, W, 14, L, 4,
A, 1, TCAD DRAWN - -
DCN RELEASE NO. CHECKED - - SIZE DRAWING NUMBER REV
- APPROVED - - D 1096107-BUBBLE REV DESCRIPTION DCN BY APPR ZONE- - - - - -
16
17
20
12
15
21
22 23
1
2
3
4
5
6
7
8
9
10
11
13
14
18
19
16
17
20
12
21
2223
15
18
13
19
11
1
6
14
2
5
8
7
9
4
10
3
12345678910111213141516
12345678910111213141516
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
I
J
1.25 B A 2.442.09 H
6.25 C
16.10 D
J 2.44
8.18 M
13.06 N
4.95 K
8.25 G
6.53 L
1.41F
9.50 E
P 5.00
7.75 R
REV DESCRIPTION DCN BY APPR ZONE- - - - - -
CONFIDENTIAL THIS DOCUMENT AND ALLINFORMATION CONTAINED
IN THIS DOCUMENT ARE THECONFIDENTIAL AND PROPRETARY
PROPERTY OF NORRISEAL,MAY NOT BE USED, COPIED
OR DISCLOSED WITHOUTTHE CONSENT OF NORRISEALOR OUTSIDE THE SCOPE OF
ANY CONSENT OF NORRISEAL AND MUST BE RETURNEDALONG WITH ANY COPIES
ON DEMAND.
ALL DIMENSIONS IN INCHESREMOVE BURRS AND BREAK EDGES TITLE
TOLERANCES NOT NOTED VBALL, FAIL CLOSEDCORNER RADIIBREAK EDGESDECIMAL (2 PLCS.)DECIMAL (3 PLCS.)CONCENTRICITYMACHINE SURFACEANGLES .5
125 RMS.010 TIR
.005
.015.015 X 45
.03 MAX
CAD DRAWN - -
PROJECT NO. SCALE DCN RELEASE NO. CHECKED - - SIZE DRAWING NUMBER REV
D-320 0.500 - APPROVED - - D VBALL-FAIL-CLOSE
PART NO. MAKE FROM DESCRIPTION FINISH MATLIDENT WEIGHT
- - - - - -
SCALE 0.620
NM
C
D
B A
4
©2015 Dover Corporation/Norriseal and its affiliates. This manual, including all text and images, is a copyrighted work of Dover Corporation/Norriseal and its affiliates. It may not be, in whole or in part, photocopied, scanned, or otherwise reproduced, revised, or publicly displayed, without prior written permission from Norriseal. This manual is for use only with the new Norriseal valves and/or controllers listed in the manual. It may not be distributed with, and is not for use with, any remanufactured products.
Due to the continuous improvement program at Norriseal, specifications and/or prices are subject to change without notice or obligation.
All trademarks contained herein are the property of their respective owners.
2500-1015T
Tel: 713·466·3552Fax: 713·896·7386www.norriseal.com
Tel: (780) 434-8566Fax: (780) 434-4267
www.albertaoiltool.com
Engineered Performance
In Canada contact:
Model Code
CBV 2500 04W02L4A1TR60-XX
Please note: not all available options are shown.
SPECIALCode Modification
- None
SEAL MATERIALCode Material Type
T Spring-loaded Teflon
ACTUATORCode Size
L30 (3” fail closed, flowing left)
R30 (3” fail closed, flowing right)
L31 (3” fail open, flowing left)
R31 (3” fail open, flowing right)
L40 (4” fail closed, flowing left)
R40 (4” fail closed, flowing right)
L41 (4” fail open, flowing left)
R41 (4” fail open, flowing right)
L60 (6” fail closed, flowing left)
R60 (6” fail closed, flowing right)
L61 (6” fail open, flowing left)
R61 (6” fail open, flowing right)
000 None
VALVE SIZE (INCHES)Size Code
3” 03
4” 04
6” 06
BODY CONFIGURATIONBody Type Code
Wafer W
ISA Flanged F
PRESSURE RATINGANSI Class Code
ANSI 150 02
ANSI 300 07
ANSI 600 14
BODY MATERIALMaterial Type Code
Carbon Steel (LCC) L
BALL MATERIALMaterial Type Code
Nickel-plated 410 4
SHAFT/TRUNNION MATERIALMaterial Type Code
17-4 PH A
THE NORRISEAL EXPERIENCEWe deliver on our promises to help our customers be their best. We back our solutions with extensive applications engineering and high-precision manufacturing.
We stand behind our products by supporting every user with aftermarket training, phone support, factory and field support, and problem solving for the life of the product. We offer the highest value, based on superior quality, innovative design, and competitive prices.
SEAT MATERIALCode Material Type
1 *PPS/Moly-filled PTFE
*Polyphenylene Sulfide