Server-pccData Files 6 Full Product Catalog - In ... · steel fasteners, submersible cable and quality Franklin Electric ... For more information about intake horns and strainer screens,

CARRY PUMPS

CARRY MANUFACTURING, INC. 1360 Prospect Avenue Caro, MI 48723-9288

Phone: 800-49-CARRY or 989-672-2779 Fax: 888-502-8289 or 989-672-2770

Email: [email protected] www.carrymfg.com

CARRY MANUFACTURING, INC.STAINLESS STEEL AXIAL FLOW SUBMERSIBLE PUMPS

STORM WATER MODELS

Carry's Stainless Steel Axial-Flow Submersible pumpsare an economical solution for high-volume, low-headflow applications. The Carry line offers single pumpswith the capacity for 50 to 2,800 GPM at 2 to 25 feet oftotal dynamic head. These pumps are also efficient andeconomical in parallel use for larger volumes.

Carry Stainless Steel Axial-Flow Submersible pumpsemploy axial-flow lift. Smooth, low-vibration, and low-pressure axial-flow lift is more efficient than centrifugalforce for low-head, high-volume pumping. Thesimplicity of the axial-flow design is one key reason whyCarry Stainless Steel Axial-Flow Submersibles are sodurable.

Carry Submersible pumps are manufactured of all stainless steelcomponents: investment castings, CNC precision machining, stainlesssteel fasteners, submersible cable and quality Franklin ElectricSubmersible motors. The stainless steel construction means that thepumps are corrosion resistant and will not rust, making them longerlasting and more durable than conventional cast iron pumps. The waterlubricated submersible motors contain no grease or oil for easymaintenance and no contamination. Carry pumps are economical tooperate. Standard applications cost just pennies a day to operate. Thepumps are available in vertical or horizontal versions, single or threephase, a variety of horsepower and voltages to meet the unique needsof your application.

Carry Stainless Steel Axial-Flow Submersible Pumps come completewith a Franklin Submersible Motor installed inside a stainless steelcasing. This motor was “Designed to Live Underwater” because of thefollowing features:

1. Its windings are completely hermetically sealed in a steel enclosure with both the outer andinner casings of stainless steel. The enclosure is surrounded and cooled by water.

2. Its rotor, consisting only of laminations and a copper or aluminum cage, runs in water withno ill effect but with the most effective cooling possible, a direct immersion in water.

3. Its bearings, both radial and thrust, are completely submerged in clean water. They requireno other lubrication and therefore have an everlasting source of lubricant water.

These features make the Franklin Submersible Motor highly efficient, while reducing thepossibilities of rust and wear on components.

Storm - i Effective 02/2016


STORM WATER MODELS

Carry Stainless Steel Axial-Flow Submersible pumps provide solutions for a wide variety ofapplications.

AGRICULTURAL APPLICATIONS:

* Provides efficient pumping for tile drainage.* Excellent for use in applications where the field tile must be installed lower than the

outlet ditch level.

* Provides low-pressure pumping for transfer, de-watering and sub-irrigation systems.* Enables pumping from pond-to-pond, ditch-to-pond, pond-to-river, etc.* Can be used to create landscaping features like man-made waterfalls and artesian wells.* Examples: farmland, agricultural sub-irrigation, golf course watering systems,

landscaping, wetlands management, septic fields, etc.

Storm - ii Effective 02/2016


STORM WATER MODELS

* Carry Manufacturing does not recommend the use of 1 to 3 Horsepower Franklin ElectricMotors for use in continuous duty applications such as fish farms. The life expectancyof the motors may be too short. Application conditions can also contribute to shorter lifespans. For instance, water temperature, mounting position, flow rates and head pressurecan all play a role. Carry suggests the use of a Sumoto motor in such cases.

MUNICIPAL APPLICATIONS:

* Conserves energy and equipment - Carry Stainless Steel Axial Flow Submersibles areless expensive than large pumps to purchase, operate, and maintain.

* Carry Stainless Steel Axial-Flow Submersible pumps can often be retro-fittedeconomically into existing stations.

Storm - iii Effective 02/2016


STORM WATER MODELS

* Provides supplemental low-flow pumping in large storm stations.* Handles many storm events without the need of larger pumps.* Provides auxiliary pumping during peak-flow in large storm stations.

* Offers effective parallel pumping for duplex, triplex, or quadplex stations.* Provides effective pumping for roof and paved storm-flow pump stations.* Examples: municipal storm-flow pumping stations, subdivisions, shopping malls,

industrial sites, parking lots, detention and retention basins, etc.

Storm - iv Effective 02/2016


STORM WATER MODELS

Standard 4" Pump1-1/2 Horsepower Performance Curve

Standard 4" Pump1 Horsepower Performance Curve (2015)

Storm - v Effective 02/2016


STORM WATER MODELS

Standard 4" Pump2 Horsepower Performance Curve


Storm - vi Effective 02/2016


STORM WATER MODELS

Note: Impeller # 3 NOT recommended for use with fixed speed applications.Standard 6" Pump

5 Horsepower Performance Curve

Standard 6" Pump7-1/2 Horsepower Performance Curve

Storm - vii Effective 02/2016


STORM WATER MODELS



Storm - viii Effective 02/2016


STORM WATER MODELS

High Volume 6" (CP06) Pump7-1/2 Horsepower Performance Curve

High Volume 6" (CP06) Pump10 Horsepower Performance Curve

Storm - ix Effective 02/2016


STORM WATER MODELS

High Volume 6" (CP06) Pump15 Horsepower Performance Curve

High Volume 8" (CP08) Pump20 Horsepower w/ 10E Impeller Performance Curve

Storm - x Effective 02/2016


STORM WATER MODELS



Storm - xi Effective 02/2016


STORM WATER MODELS



Storm - xii Effective 02/2016


STANDARD 4" DISCHARGE STORM WATER MODELS

PUMP SPECIFICATIONS:

PUMP:< Axial-Flow/Lift< Stainless Steel construction< Stainless Steel impeller, investment

casting, dynamically balanced

DISCHARGE:< 4" Diameter< NPT standard threading, male

60 or 50 Hz SERVICE:< Single Phase or Three Phase

IMPELLER:< 9E 3-blade: 1HP< 11E 3-blade: 1HP< 13E 4-blade: 1, 1-1/2, 2 or 3HP< 17E 4-blade: 1-1/2, 2 or 3HP< 23E 4-blade: 1-1/2, 2 or 3HP

CYCLE CAPACITY:< up to 300 times per 24 hour period< See each HP page for specifics

MOTOR:< Franklin Electric 4" Super Stainless Submersible< Franklin Electric 4" High Thrust Submersible (2 or 3HP Oil

Stripper)< Thrust Capacity: 650 pounds (1, 1-1/2, or 2HP)< Thrust Capacity: 900 pounds (3HP)< Thrust Capacity: 1500 pounds (2 or 3HP Oil Stripper)< 3450 RPM (2875 for 50 Hz)< Corrosion Resistant All Stainless Steel Exterior

Construction< Stainless Steel Splined Shaft< Hermetically-Sealed Windings< Mechanical Seal (600M Motors only)< Anti-Track Self Healing Resin System< Water Lubrication< Filter Check Valve< Kingsbury-type Thrust Bearing< Pressure Equalizing Diaphragm< Built-in Lightning Arrestors (All Single Phase; 200 & 230

Volt, Three Phase for 1, 1-1/2, 2 or 3HP)< UL 778 Recognized, CSA Certified< Sumoto motors are also available for certain applications,

contact the factory for specifics.

Effective 02/2015Storm - 1



VERTICAL PUMP ONLY

Dimensions(in inches)

VoltageWeight

(pounds)A-MinimumSubmergence

B-HeightC-Overall

Height

1HP/1PH 230 56 16.50 18.00 20.25

1HP/3PH 200, 230 or 460 56 16.50 18.00 20.25

1.5HP/1PH/2-Wire

230 62 20.50 22.00 24.25

1.5HP/1PH/3-Wire

230 59 18.50 20.00 22.25

1.5HP/3PH 200, 230, 460 or 575 56 16.50 18.00 20.25

2HP/1PH 230 61 20.50 22.00 24.25

2HP/3PH 200, 230, 460 or 575 59 18.50 20.00 22.25

3HP/1PH 230 85 24.75 26.25 28.25

3HP/3PH 200, 230, 460 or 575 72 20.50 22.00 24.25Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those

above. Contact the factory for specifics.




VERTICAL PUMP WITH PVC SCREEN


Voltage Weight(pounds)

A-Height B-MinimumSubmergence

C-ScreenHeight

D-OverallHeight

1HP/1PH 230 69 19.40 17.90 14.50 21.65

1HP/3PH 200, 230 or 460 69 19.40 17.90 14.50 21.65

1.5HP/1PH/2-Wire

230 76 23.60 22.10 18.75 25.85

1.5HP/1PH/3-Wire

230 73 21.40 19.90 16.50 23.65

1.5HP/3PH 200, 230, 460 or 575 70 19.40 17.90 14.50 21.65

2HP/1PH 230 76 23.60 22.10 18.75 25.85

2HP/3PH 200, 230, 460 or 575 73 21.40 19.90 16.50 23.65

3HP/1PH 230 104 28.10 26.60 23.25 30.35

3HP/3PH 200, 230, 460 or 575 89 23.60 22.10 18.75 25.85

Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from thoseabove. Contact the factory for specifics.

Note: PVC Screens sold separately. See Accessories Section, page 1.




AVAILABLE OPTIONS:

< Control Panels, Standard or Delux and other options, see Accessories Section, page 36.< Variable Frequency Drives, see Accessories Section, page 75.< Floats, 120/230 Volt DFD, see Accessories Section, page 9.< PVC Stainer Screens, see Accessories Section, page 1.< Pump Rings, see Accessories Section, page 4.< Motor Leads, see Accessories Section, page 5.< Lift Chain and Quick Links, see Accessories Section, page 7.< Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22.< Swing Check Valves, see Accessories Section, page 28.< Flap Valves and Gates, see Accessories Section, page 29.< Quick Disconnects, see Accessories Section, page 31.< Flexible Couplers, see Accessories Section, page 35.

Recuperator

Motor Nuts/Lock WashersImpeller Bolt/Lock Washer

Impeller

Pump Shell

Cord Clamp/Tie Strap

Motor

Motor Lead

Base Pad/Spacer Block

Base Pad Bolts/Lock Washers




HORIZONTAL PUMPS:

Carry’s Stainless Steel Axial Flow Submersible pumps are also available in a horizontal style. These pumpshave the same components of the vertical pumps, ie. motor, lead, impeller, recuperator, control panels, floatsetc. By placing the pumps “on their side” we have reduced the minimum submergence height. This meansthat the pump is able to pump closer to the bottom of the sump pit and can be placed in much shorter sumps.These pumps are available with a PVC intake horn, with a PVC strainer screen or with a plain intake. Seethe following diagrams. For more information about intake horns and strainer screens, see the AccessoriesSection.

Please note: horizontal pump motors typically have a shorter life expectancy than its vertical counterpart. Franklin submersible motors are designed primarily for operation in the vertical, shaft up position. Duringacceleration, the pump thrust increases as its output head increases. In cases where the pump head staysbelow its normal operation range during start-up and full speed conditions, the pump may create upwardthrust. This creates upward thrust on the motor up thrust bearing. This is an acceptable operation for shortperiods at each start, but running continuously with upthrust will cause excessive wear on the upthrustbearing.

As the mounting position of the motor becomes further from vertical and closer to horizontal, the probabilityof shortened thrust bearing life increases. For normal motor life expectancy in horizontal pumps, we havedesigned the pump with a slight rise using the feet of the pump to raise the discharge (shaft end) of the pump. Application should limit the starts to 10 within a 24 hour period. In horizontal applications where this is notpossible, Carry suggests the use of a Sumoto motor in place of the Franklin Electric submersible motor. Seethe Replacements Section of the catalog for more information on Sumoto motors.




HORIZONTAL PUMP ONLY


VoltageWeight

(pounds)A-Pump Length B-Overall Length

1HP/1PH 230 49 16.50 18.75

1HP/3PH 200, 230 or 460 49 16.50 18.75

1.5HP/1PH/2-Wire 230 59 20.00 22.75

1.5HP/1PH/3-Wire 230 56 18.00 20.25

1.5HP/3PH 200, 230, 460 or 575 50 16.50 18.75

2HP/1PH 230 55 20.00 22.25

2HP/3PH 200, 230, 460 or 575 53 18.00 20.25

3HP/1PH 230 79 25.00 27.25

3HP/3PH 200, 230, 460 or 575 66 21.00 23.25Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above.

Contact the factory for specifics.




HORIZONTAL PUMP WITH INTAKE HORN


VoltageWeight

(pounds)A-Pump Length B-Overall Length

1HP/1PH 230 53 26.00 28.25

1HP/3PH 200, 230 or 460 53 26.00 28.25

1.5HP/1PH/2-Wire 230 63 28.50 30.75

1.5HP/1PH/3-Wire 230 60 26.00 28.25

1.5HP/3PH 200, 230, 460 or 575 54 24.00 26.25

2HP/1PH 230 59 28.50 30.75

2HP/3PH 200, 230, 460 or 575 57 26.00 28.25

3HP/1PH 230 83 33.00 35.25

3HP/3PH 200, 230, 460 or 575 70 28.50 30.75Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above.

Contact the factory for specifics.Note: PVC Intake Horns sold separately. See Accessories Section, page 4.




HORIZONTAL PUMP WITH PVC SCREEN


VoltageWeight

(pounds)A-

HeightB-PumpWidth

C-ScreenLength

D-PumpLength

E-OverallLength

1HP/1PH 230 62 15.50 12.625 14.50 21.50 23.75

1HP/3PH 200, 230 or 460 62 15.50 12.625 14.50 21.50 23.75

1.5HP/1PH/2-Wire 230 73 15.50 12.625 18.50 25.50 27.75

1.5HP/1PH/3-Wire 230 70 15.50 12.625 16.50 23.50 25.75

1.5HP/3PH 200, 230, 460 or 575 64 15.50 12.625 16.50 23.50 25.75

2HP/1PH 230 70 18.50 15.625 18.75 26.00 28.25

2HP/3PH 200, 230, 460 or 575 67 18.50 15.625 16.50 23.50 25.75

3HP/1PH 230 98 18.50 15.625 21.00 28.00 30.25

3HP/3PH 200, 230, 460 or 575 83 18.50 15.625 18.75 26.00 28.25

Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from thoseabove. Contact the factory for specifics.





Recuperator

Impeller Bolt/Lock Washer

Impeller

Motor Motor Lead


Motor Nuts/Lock Washers

Pump Shell

Base Pad/Spacer Block


AVAILABLE OPTIONS:

< Control Panels, Standard or Delux and other options, see Accessories Section, page 36.< Variable Frequency Drives, see Accessories Section, page 75.< Floats, 120/230 Volt DFD, see Accessories Section, page 9.< PVC Strainer Screens, see Accessories Section, page 1.< PVC Intake Horns, see Accessories Section, page 4.< Motor Leads, see Accessories Section, page 5.< Lift Chain and Quick Links, see Accessories Section, page 7.< Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22.< Swing Check Valves, see Accessories Section, page 28.< Flap Valves and Gates, see Accessories Section, page 29.< Quick Disconnects, see Accessories Section, page 31.< Flexible Couplers, see Accessories Section, page 35.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

*H

PV

OL

TS

PH

AS

ES

ER

VIC

EF

AC

TO

R

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MP

SM

OT

OR

CO

RD

SIZ

E**

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

400-

12X

-31

or

400-

12X

-31H

244-

5089

01

230

11.

48.

210

.448

.72-

Wir

e14

/2 W

/GN

/AN

/A

SM

-616

5013

01

230

11.

47.

5-

-2-

Wir

e16

/2 W

/GN

/AN

/A

214-

5089

01

230

11.

4Y

5.6

B5.

7R

3.4

Y8.

1B

6.2

R3.

341

.83-

Wir

e14

/3 W

/G28

2-30

0-81

101-

76-6

7

214-

5080

61

230

11.

4Y

5.6

B5.

7R

3.4

Y8.

1B

6.2

R3.

341

.83-

Wir

e60

0M14

/3 W

/G28

2-30

0-81

101-

76-6

7

400-

32X

-31

or40

0-32

X-3

1H

234-

5039

21

200

31.

44.

55.

430

.9N

/A14

/3 W

/G40

0-83

1-20

010

1-76

-66

234-

5139

21

230

31.

43.

94.

726

.9N

/A14

/3 W

/G40

0-83

1-23

010

1-76

-66

234-

5130

61

230

31.

43.

94.

726

.960

0M14

/3 W

/G40

0-83

1-23

010

1-76

-66

SM

-616

2012

01

230

31.

44.

9-

-N

/A16

/3 W

/G40

0-83

1-23

010

1-76

-66

400-

34X

-31

or40

0-34

X-3

1H

234-

5239

41

460

31.

42.

02.

413

.5N

/A14

/3 W

/G40

0-83

1-46

010

1-76

-66

234-

5230

61

460

31.

42.

02.

413

.560

0M14

/3 W

/G40

0-83

1-46

010

1-76

-66

SM

-616

8012

01

460

31.

42.

3-

-N

/A16

/3 W

/G40

0-83

1-46

010

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

*H

PV

OL

TS

PH

AS

ES

ER

VIC

EF

AC

TO

R

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MP

SM

OT

OR

CO

RD

SIZ

E**

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

401-

12X

-31

or

401-

12X

-31H

244-

3099

01-

1/2

230

11.

310

.613

.166

.22-

Wir

e14

/2 W

/GN

/AN

/A

SM

-616

5016

01-

1/2

230

11.

38.

2-

-2-

Wir

e16

/3 W

/GN

/AN

/A

224-

3009

21-

1/2

230

11.

3Y

10.0

B9.

9R

1.3

Y10

.0B

9.9

R1.

351

.43-

Wir

e14

/3 W

/G28

2-30

0-81

101-

76-6

7

224-

3006

11-

1/2

230

11.

3Y

10.0

B9.

9R

1.3

Y10

.0B

9.9

R1.

351

.43-

Wir

e60

0M14

/3 W

/G28

2-30

0-81

101-

76-6

7

401-

32X

-31

or40

1-32

X-3

1H

234-

5049

21-

1/2

200

31.

35.

86.

838

.2N

/A14

/3 W

/G40

1-83

1-20

010

1-76

-66

234-

5149

21-

1/2

230

31.

35.

05.

933

.2N

/A14

/3 W

/G40

1-83

1-23

010

1-76

-66

234-

5140

61-

1/2

230

31.

35.

05.

933

.260

0M14

/3 W

/G40

1-83

1-23

010

1-76

-66

SM

-616

2016

01-

1/2

230

31.

36.

4-

-N

/A16

/3 W

/G40

1-83

1-23

010

1-76

-66

401-

34X

-31

or40

1-34

X-3

1H

234-

5249

41-

1/2

460

31.

32.

53.

116

.6N

/A14

/3 W

/G40

1-83

1-46

010

1-76

-66

234-

5240

61-

1/2

460

31.

32.

53.

116

.660

0M14

/3 W

/G40

1-83

1-46

010

1-76

-66

SM

-616

8016

01-

1/2

460

31.

33.

3-

-N

/A16

/3 W

/G40

1-83

1-46

010

1-76

-66

234-

5349

41-

1/2

575

31.

32.

02.

413

.3N

/A14

/3 W

/G40

1-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

*H

PV

OL

TS

PH

AS

ES

ER

VIC

EF

AC

TO

R

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MP

SM

OT

OR

CO

RD

SIZ

E**

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

402-

12X

-31

or

402-

12X

-31H

224-

3019

22

230

11.

25Y

10.0

B9.

3R

2.6

Y13

.2B

11.9

R2.

653

.13-

Wir

e14

/3 W

/G28

2-30

1-83

101-

76-6

7

224-

3016

12

230

11.

25Y

10.0

B9.

3R

2.6

Y13

.2B

11.9

R2.

653

.13-

Wir

e60

0M14

/3 W

/G28

2-30

1-83

101-

76-6

7

224-

3015

02

230

11.

25Y

10.0

B9.

3R

2.6

Y13

.2B

11.9

R2.

653

.1O

ilS

trip

per

14/3

W/G

282-

301-

8310

1-76

-67

402-

32X

-31

or

402-

32X

-31H

234-

3059

22

200

31.

257.

79.

350

.3N

/A14

/3 W

/G40

2-83

1-20

010

1-76

-66

234-

3159

22

230

31.

256.

78.

145

.0N

/A14

/3 W

/G40

2-83

1-23

010

1-76

-66

234-

3150

62

230

31.

256.

78.

145

.060

0M14

/3 W

/G40

2-83

1-23

010

1-76

-66

234-

3155

02

230

31.

256.

78.

145

.0O

ilS

trip

per

14/3

W/G

402-

831-

230

101-

76-6

6

SM

-616

2021

02

230

31.

258.

2-

-N

/A16

/3 W

/G40

2-83

1-23

010

1-76

-66

402-

34X

-31

or40

2-34

X-3

1H

234-

3259

42

460

31.

253.

44.

122

.5N

/A14

/3 W

/G40

2-83

1-46

010

1-76

-66

234-

3250

62

460

31.

253.

44.

122

.560

0M14

/3 W

/G40

2-83

1-46

010

1-76

-66

234-

3255

02

460

31.

253.

44.

122

.5O

ilS

trip

per

14/3

W/G

402-

831-

460

101-

76-6

6

SM

-615

3020

02

460

31.

254.

2-

-N

/A16

/3 W

/G40

2-83

1-46

010

1-76

-66

234-

3359

42

575

31.

252.

73.

217

.8N

/A14

/3 W

/G40

2-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

*H

PV

OL

TS

PH

AS

ES

ER

VIC

EF

AC

TO

R

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MP

SM

OT

OR

CO

RD

SIZ

E**

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

403-

12X

-31

or40

3-12

X-3

1H

224-

3022

63

230

11.

15Y

14.0

B11

.2R

6.1

Y17

.0B

12.6

R6.

083

.4N

/A14

/3 W

/G28

2-30

2-83

101-

76-6

7

224-

3020

63

230

11.

15Y

14.0

B11

.2R

6.1

Y17

.0B

12.6

R6.

083

.460

0M14

/3 W

/G28

2-30

2-83

101-

76-6

7

224-

3025

03

230

11.

15Y

14.0

B11

.2R

6.1

Y17

.0B

12.6

R6.

083

.4O

ilS

trip

per

14/3

W/G

282-

302-

8310

1-76

-67

403-

32X

-31

or40

3-32

X-3

1H

234-

3062

63

200

31.

1510

.912

.569

.5N

/A14

/3 W

/G40

3-83

1-20

010

1-76

-66

234-

3162

63

230

31.

159.

510

.960

.3N

/A14

/3 W

/G40

3-83

1-23

010

1-76

-66

234-

3160

63

230

31.

159.

510

.960

.360

0M14

/3 W

/G40

3-83

1-23

010

1-76

-66

SM

-616

2026

03

230

31.

1511

.0-

-N

/A16

/3 W

/G40

3-83

1-23

010

1-76

-66

403-

34X

-31

or40

3-34

X-3

1H

234-

3262

63

460

31.

154.

85.

531

.0N

/A14

/3 W

/G40

3-83

1-46

010

1-76

-66

234-

3260

63

460

31.

154.

85.

531

.060

0M14

/3 W

/G40

3-83

1-46

010

1-76

-66

234-

3265

03

460

31.

154.

85.

531

.0O

ilS

trip

per

14/3

W/G

403-

831-

460

101-

76-6

6

SM

-615

3025

53

460

31.

155.

8-

-N

/A16

/3 W

/G40

3-83

1-46

010

1-76

-66

234-

3362

63

575

31.

153.

84.

425

.1N

/A14

/3 W

/G40

3-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

1 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

1-1/

2 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

2 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

4"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

3 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E




SINGLE PHASE CONTROL PANELS:Franklin Control Panels are reliable "Workhorses" for your commercial oragricultural installations. Start capacitors provide high torque start-ups, whilemotor matched run capacitors offer smooth, quiet, efficient motor operation. Manual reset overloads protect your motor and pumping equipment fromabnormal conditions. Control Panels have a magnetic contactor and largeterminal blocks.

Note: Carry recommends the use of Franklin Electric single phase control panels with Carry single phasepumps and 3-wire motors. The start and run capacitors are housed in the control panel, not the motor. Thepump will not operate without these capacitors. See Accessories Section, page 36 for more details on SinglePhase Control Panels.

THREE PHASE CONTROL PANELS:Carry designed Three Phase control panels featureNEMA 3R enclosures, IEC adjustable motorstarters, disconnects, time delays, circuit breakers,transformers and switches.

Franklin Three Phase control panels are simple andfunctional controls with NEMA 3R enclosures,main circuit breaker disconnects, universaltransformers, contactors, overloads and Hand-Off-Auto switches.

See Accessories Section, page 45 for more details on Three Phase Control Panels.

VARIABLE FREQUENCY DRIVE PACKAGES:Carry has developed a package that includes a Variable Frequency Drive in a NEMA4 fiberglass enclosure along with a pressure level transducer, flow sensor and lightningarrestor to operate in pumping applications. These packages allow you to achievehigher flow rates with lower horsepower and smaller sumps. These packages can beused with Single Phase or Three Phase input power to operate a Three Phase pump. SeeAccessories Section, page 75 for more details on Variable Frequency Drives andpackages.

120/230 VOLT DFD FLOATS:DFD floats are used as a switch to operate the pump on and offwith the water level in the pump pit. The floats have a pumpingrange of 1" to 48" and contain a heavy-duty mercury switch witha holding relay sealed inside one float. See the AccessoriesSection, page 9 for more details on DFD Floats.

PVC STRAINER SCREENS:PVC Strainer Screens are available for vertical and horizontalpumps. They are designed to allow for water flow while restricting debris fromreaching the pump. They are made of SDR35 PVC pipe and high densitypolyethylene for light weight durability. See the Accessories Section, page 1 formore details on PVC Strainer Screens.

Franklin PanelCarry Designed Panel




SPECIFICATIONS:

1 Horsepower

Single Phase or Three Phase

Two Wire or Three Wire

50 Hertz or 60 Hertz

200 Volts or 230 Volts or 460 Volts

9E 3-blade Impeller or 11E 3-blade Impeller or 1 3 E 4 - b l a d e

Impeller

The pump shall be composed of the following:

Motor: A Franklin Electric 4" Super Stainless Submersible Motor (2-wire or 3-wire); rated 1Horsepower with a service factor of 1.40 (1.0 for 50 Hz); thrust capacity of 650 pounds;RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction;stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resinsystem; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressureequalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor(all single phase, 200 & 230 volt, three phase).

Contact the factory for specifics of the Sumoto 4" Motor.

Pump Shell: A Schedule 5 304 stainless steel shell with 303 stainless steel investment casted base andcrown, and a 303 stainless steel investment cast recuperator that is CNC precision machined;all components are assembled using a controlled welding process.

Impeller: A 303 stainless steel investment cast impeller; CNC precision machined and dynamicallybalanced.

Fasteners: All stainless steel hex head bolts, nuts and washers.

Base Pads: Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts.

Lead: A 30' SJEOW 14 AWG/2-wire (C.S.A. approved) lead with ground or A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground.

CycleCapacity: Single Phase = 100 times per 24 hour period, Three Phase = 300 times per 24hour period.

Lift: Axial-Flow

Discharge: A discharge of 4" diameter with male threading, NPT standard.




SPECIFICATIONS:

1-1/2 Horsepower


Two Wire or Three Wire


200 Volts or 230 Volts or 460 Volts or 575 Volts

17o 4-Blade Impeller or 23o 4-Blade Impeller


Motor: A Franklin Electric 4" Super Stainless Submersible Motor (2-wire or 3-wire); rated 1-1/2Horsepower with a service factor of 1.30 (1.0 for 50 Hz); thrust capacity of 650 pounds;RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction;stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resinsystem; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressureequalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor(all single phase, 200 & 230 volt, three phase).






Lead: A 30' SJEOW 14 AWG/2-wire (C.S.A. approved) lead with ground or A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground.

Cycle Capacity: Single Phase = 100 times per 24 hour period, Three Phase = 300 times per 24 hour period.

Lift: Axial-Flow





SPECIFICATIONS:

2 Horsepower




Storm Water or Oil Stripper

17o 4-Blade Impeller or 23o 4-Blade Impeller


Motor: A Franklin Electric 4" Super Stainless Submersible Motor; rated 2 Horsepower with aservice factor of 1.25 (1.0 for 50 Hz); thrust capacity of 650 pounds (1500 for Oil Stripper);RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction;stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resinsystem; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressureequalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor(all single phase, 200 & 230 volt, three phase).






Lead: A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground.


Lift: Axial-Flow





SPECIFICATIONS:

3 Horsepower




Storm Water or Oil Stripper

13o 4-Blade Impeller or 17o 4-Blade Impeller or 23o 4-Blade Impeller


Motor: A Franklin Electric 4" Super Stainless Submersible Motor; rated 3 Horsepower with aservice factor of 1.25 (1.0 for 50 Hz); thrust capacity of 900 pounds (1500 for Oil Stripper);RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction;stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resinsystem; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressureequalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor(all single phase, 200 & 230 volt, three phase).






Lead: A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground.


Lift: Axial-Flow






PUMP:< Axial-Flow/Lift< Stainless Steel construction< Stainless Steel impeller, investment casting,

dynamically balanced



IMPELLER:< Number 1: 5 or 7-1/2HP< Number 2: 5 or 7-1/2HP< Number 3: 5, 7-1/2 or 10HP< Number 4: 7-1/2 or 10HP< Number 4+: 10 or 15HP


MOTOR:< Franklin Electric Super-6" Submersible< Thrust Capacity: 1500 pounds (5 & 7.5HP)< Thrust Capacity: 3500 pounds (10 & 15HP)< 3450 RPM (2875 for 50 Hz)< Corrosion-Resistant Construction< Double Flange Design< Stainless Steel Splined Shaft< Hermetically-Sealed Stator< Resin Encapsulated Windings< Stainless Steel Shell< Epoxy Coated End Frames< Filter Check Valve< Kingsbury-type Water Lubricated Thrust

Bearing< Pressure-Equalized Diaphragm< Sand Fighter Slinger< Copper Bar Rotor< Available with or without Subtrol protection

Storm - 23 Effective 02/2015



VERTICAL PUMP ONLY

Vertical Pump Only


VoltageWeight

(pounds)A-Height

B-MinimumSubmergence

C-Overall Height

5HP/1PH 230 164 33.65 31.65 37.65

5HP/3PH 200, 230, 460 or 575 148 31.00 29.00 35.00

7.5HP/1PH 230 182 38.00 36.00 42.00

7.5HP/3PH 200, 230, 460 or 575 155 34.25 32.25 38.25

10HP/1PH 230 197 40.00 38.00 44.00

10HP/3PH 200, 230, 460 or 575 165 35.90 33.90 39.90

15HP/1PH 230 210 42.60 40.60 46.60

15HP/3PH 200, 230, 460 or 575 188 38.00 36.00 42.00






VoltageWeight

(pounds)

A-OverallHeight

B-Height

C-ScreenHeight

D-MinimumSubmergence

5HP/1PH 230 206 38.60 34.60 29.750 32.60

5HP/3PH 200, 230, 460 or 575 187 34.80 31.80 27.000 29.80

7.5HP/1PH 230 227 42.10 38.10 33.250 36.10

7.5HP/3PH 200, 230, 460 or 575 196 38.10 34.60 29.750 32.60

10HP/1PH 230 244 44.30 40.30 35.500 38.30

10HP/3PH 200, 230, 460 or 575 208 40.20 36.20 31.375 34.20

15HP/1PH 230 258 44.80 40.80 35.500 38.80

15HP/3PH 200, 230, 460 or 575 233 42.70 38.70 33.250 36.70






Impeller

Motor

Motor Lead


Motor Bolts/Lock Washers

Pump Shell

Base Pads/Spacer Blocks


Recuperator

AVAILABLE OPTIONS:< Control Panels, Standard or Delux and other options, see Accessories Section, page 36.< Variable Frequency Drives, see Accessories section, page 75.< Floats, 120/230 Volt DFD, see Accessories Section, page 9.< PVC Stainer Screens, see Accessories Section, page 1.< Pump Rings, see Accessories Section, page 4.< Motor Leads, see Accessories Section, page 5.< Lift Chain and Quick Links, see Accessories Section, page 7.< Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22.< Swing Check Valves, see Accessories Section, page 28.< Flap Valves and Gates, see Accessories Section, page 29.< Quick Disconnects, see Accessories Section, page 31.< Flexible Couplers, see Accessories Section, page 35.




HORIZONTAL PUMPS:

Carry’s Stainless Steel Axial Flow Submersible pumps are now available in a horizontal style. These pumps have the same components of the vertical pumps, ie. motor, lead, impeller, recuperator,control panels, floats etc. By placing the pumps “on their side” we have reduced the minimumsubmergence height. This means that the pump is able to pump closer to the bottom of the sump pitand can be placed in much shorter sumps. These pumps are available with a PVC intake horn, witha PVC strainer screen or with a plain intake. See the following diagrams. For more informationabout intake horns and strainer screens, see the Accessories section.

Please note: horizontal pump motors typically have a shorter life expectancy than its verticalcounterpart. Franklin submersible motors are designed primarily for operation in the vertical, shaftup position. During acceleration, the pump thrust increases as its output head increases. In caseswhere the pump head stays below its normal operation range during start-up and full speedconditions, the pump may create upward thrust. This creates upward thrust on the motor up thrustbearing. This is an acceptable operation for short periods at each start, but running continuouslywith upthrust will cause excessive wear on the upthrust bearing.

As the mounting position of the motor becomes further from vertical and closer to horizontal, theprobability of shortened thrust bearing life increases. For normal motor life expectancy in horizontalpumps, we have designed the pump with a slight rise using the feet of the pump to raise thedischarge (shaft end) of the pump. Application should limit the starts to 10 within a 24 hour period.






VoltageWeight

(pounds)

A-PumpHeight

B-DischargeMidpoint

C-PumpLength

D-OverallLength

5HP/1PH 230 155 11.625 7.625 31.00 35.00

5HP/3PH 200, 230, 460 or 575 139 11.625 7.625 28.50 32.50

7.5HP/1PH 230 172 12.875 8.875 33.50 37.50

7.5HP/3PH 200, 230, 460 or 575 146 12.875 8.875 29.50 33.50

10HP/1PH 230 188 12.875 8.875 36.00 40.00

10HP/3PH 200, 230, 460 or 575 156 12.875 8.875 31.00 35.00

15HP/1PH 230 201 12.875 8.875 38.50 42.50

15HP/3PH 200, 230, 460 or 575 178 12.875 8.875 33.50 37.50






VoltageWeight

(pounds)A- Height

B-DischargeMidpoint

C-PumpLength

D-OverallLength

5HP/1PH 230 161 11.625 7.625 43.00 47.00

5HP/3PH 200, 230, 460 or 575 145 11.625 7.625 40.50 44.50

7.5HP/1PH 230 178 12.875 8.875 45.50 49.50

7.5HP/3PH 200, 230, 460 or 575 152 12.875 8.875 43.00 47.00

10HP/1PH 230 194 12.875 8.875 47.50 51.50

10HP/3PH 200, 230, 460 or 575 162 12.875 8.875 43.00 47.00

15HP/1PH 230 207 12.875 8.875 50.00 54.00

15HP/3PH 200, 230, 460 or 575 184 12.875 8.875 45.00 49.00

Note: PVC Intake Horns sold separately. See Accessories Section, page 4.






Voltage Weight(pounds)

A-Height

B-DischargeMidpoint

C-ScreenLength

D-PumpLength

E-OverallLength

5HP/1PH 230 197 21.50 7.625 29.750 37.50 41.50

5HP/3PH 200, 230,460 or 575

178 21.50 7.625 27.000 34.50 38.50

7.5HP/1PH 230 217 22.75 8.875 33.250 40.50 44.50

7.5HP/3PH 200, 230,460 or 575

187 22.75 8.875 29.750 37.00 41.00

10HP/1PH 230 235 22.75 8.875 31.375 39.00 43.50

10HP/3PH 200, 230,460 or 575

199 22.75 8.875 31.375 39.00 43.00

15HP/1PH 230 246 22.75 8.875 35.500 43.00 47.00

15HP/3PH 200, 230,460 or 575

226 22.75 8.875 33.250 40.50 44.50





Recuperator


Impeller

MotorMotor Lead


Motor Bolts/Lock Washers

Pump Shell

Mounting Bracket

Base Pads/Spacer Blocks


AVAILABLE OPTIONS:



CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

HP

VO

LT

SP

HA

SE

SE

RV

ICE

FA

CT

OR

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MP

SM

OT

OR

CO

RD

SIZ

E*

SU

B-

TR

OL

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

605-

12X

-31

or60

5-12

X-3

1H

226-

1109

05

230

11.

15Y

23.0

B14

.3R

10.8

Y27

.5B

17.4

R10

.599

.0ST

D10

/3 W

/GN

o28

2-11

3-93

101-

76-6

7

226-

1108

05

230

11.

15Y

23.0

B14

.3R

10.8

Y27

.5B

17.4

R10

.599

.0S

AN

DFI

GH

TE

R10

/3 W

/GN

o28

2-11

3-93

101-

76-6

7

605-

32X

-31

or60

5-32

X-3

1H

236-

6509

05

200

31.

1517

.520

.099

.0ST

D12

/3 W

/GN

o60

5-83

1-20

010

1-76

-66

236-

6508

15

200

31.

1517

.520

.099

.0S

AN

DFI

GH

TE

R12

/3 W

/GY

es60

5-83

1-20

010

1-76

-66

236-

6009

05

230

31.

1515

.017

.686

.0ST

D12

/3 W

/GN

o60

5-83

1-23

010

1-76

-66

236-

6008

15

230

31.

1515

.017

.686

.0S

AN

DFI

GH

TE

R12

/3 W

/GY

es60

5-83

1-23

010

1-76

-66

605-

34X

-31

or60

5-34

X-3

1H

236-

6109

05

460

31.

157.

58.

843

.0ST

D14

/3 W

/GN

o60

5-83

1-46

010

1-76

-66

236-

6108

15

460

31.

157.

58.

843

.0S

AN

DFI

GH

TE

R14

/3 W

/GY

es60

5-83

1-46

010

1-76

-66

236-

6209

05

575

31.

156.

07.

134

.0ST

D14

/3 W

/GN

o60

5-83

1-57

510

1-76

-66

236-

6208

15

575

31.

156.

07.

134

.0S

AN

DFI

GH

TE

R14

/3 W

/GY

es60

5-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

HP

VO

LT

SP

HA

SE

SE

RV

ICE

FA

CT

OR

FUL

LL

OA

DA

MPS

MA

XL

OA

DA

MPS

LO

CK

ED

RO

TO

RA

MPS

MO

TO

RC

OR

DSI

ZE

*S

UB

-T

RO

L

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

607-

12X

-31

or60

7-12

X-3

1H

226-

1119

07-

1/2

230

11.

15Y

36.5

B34

.4R

5.5

Y42

.1B

40.5

R5.

416

5.0

STD

8/3

W/G

No

282-

201-

9310

1-76

-67

226-

1118

07-

1/2

230

11.

15Y

36.5

B34

.4R

5.5

Y42

.1B

40.5

R5.

416

5.0

SA

ND

FIG

HT

ER

8/3

W/G

No

282-

201-

9310

1-76

-67

607-

32X

-31

or60

7-32

X-3

1H

236-

6519

07-

1/2

200

31.

1525

.128

.315

0.0

STD

10/3

W/G

No

607-

831-

200

101-

76-6

6

236-

6518

17-

1/2

200

31.

1525

.128

.315

0.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

607-

831-

200

101-

76-6

6

236-

6019

07-

1/2

230

31.

1521

.824

.613

0.0

STD

10/3

W/G

No

607-

831-

230

101-

76-6

6

236-

6018

17-

1/2

230

31.

1521

.824

.613

0.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

607-

831-

230

101-

76-6

6

607-

34X

-31

or60

7-34

X-3

1H

236-

6119

07-

1/2

460

31.

1510

.912

.365

.0ST

D14

/3 W

/GN

o60

7-83

1-46

010

1-76

-66

236-

6118

17-

1/2

460

31.

1510

.912

.365

.0S

AN

DFI

GH

TE

R14

/3 W

/GY

es60

7-83

1-46

010

1-76

-66

236-

6219

07-

1/2

575

31.

158.

79.

852

.0ST

D14

/3 W

/GN

o60

7-83

1-57

510

1-76

-66

236-

6218

17-

1/2

575

31.

158.

79.

852

.0S

AN

DFI

GH

TE

R14

/3 W

/GY

es60

7-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

HP

VO

LT

SP

HA

SE

SE

RV

ICE

FA

CT

OR

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MPS

MO

TO

RC

OR

DSI

ZE

*S

UB

-T

RO

L

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

610-

12X

-31

or61

0-12

X-3

1H

226-

1129

010

230

11.

15Y

44.0

B39

.5R

9.3

Y51

.0B

47.5

R8.

920

4.0

STD

6/3

W/G

No

282-

202-

9310

1-76

-67

226-

1128

010

230

11.

15Y

44.0

B39

.5R

9.3

Y51

.0B

47.5

R8.

920

4.0

SA

ND

FIG

HT

ER

6/3

W/G

No

282-

202-

9310

1-76

-67

610-

32X

-31

or61

0-32

X-3

1H

236-

6529

010

200

31.

1532

.737

.019

8.0

STD

8/3

W/G

No

610-

831-

200

101-

76-6

6

236-

6528

110

200

31.

1532

.737

.019

8.0

SA

ND

FIG

HT

ER

8/3

W/G

Yes

610-

831-

200

101-

76-6

6

236-

6029

010

230

31.

1528

.432

.217

2.0

STD

8/3

W/G

No

610-

831-

230

101-

76-6

6

236-

6028

110

230

31.

1528

.432

.217

2.0

SA

ND

FIG

HT

ER

8/3

W/G

Yes

610-

831-

230

101-

76-6

6

610-

34X

-31

or61

0-34

X-3

1H

236-

6129

010

460

31.

1514

.216

.186

.0S

TD

12/3

W/G

No

610-

831-

460

101-

76-6

6

236-

6128

110

460

31.

1514

.216

.186

.0S

AN

DF

IGH

TE

R12

/3 W

/GY

es61

0-83

1-46

010

1-76

-66

236-

6229

010

575

31.

1511

.412

.969

.0S

TD

12/3

W/G

No

610-

831-

575

101-

76-6

6

236-

6228

110

575

31.

1511

.412

.969

.0S

AN

DF

IGH

TE

R12

/3 W

/GY

es61

0-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

HP

VO

LT

SP

HA

SE

SE

RV

ICE

FA

CT

OR

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MPS

MO

TO

RC

OR

DSI

ZE

*S

UB

-T

RO

L

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

615-

12X

-31

or61

5-12

X-3

1H

226-

1139

015

230

11.

15Y

62.0

B52

.0R

17.5

Y75

.0B

62.5

Y16

.930

3.0

ST

D4/

3 W

/GN

o28

2-20

3-96

101-

76-6

7

226-

1138

015

230

11.

15Y

62.0

B52

.0R

17.5

Y75

.0B

62.5

Y16

.930

3.0

SA

ND

FIG

HT

ER

4/3

W/G

No

282-

203-

9610

1-76

-67

615-

32X

-31

or61

5-32

X-3

1H

236-

6539

015

200

31.

1547

.854

.430

6.0

ST

D6/

3 W

/GN

o61

5-83

1-20

010

1-76

-66

236-

6538

115

200

31.

1547

.854

.430

6.0

SA

ND

FIG

HT

ER

6/3

W/G

Yes

615-

831-

200

101-

76-6

6

236-

6039

015

230

31.

1541

.647

.426

6.0

ST

D6/

3 W

/GN

o61

5-83

1-23

010

1-76

-66

236-

6038

115

230

31.

1541

.647

.426

6.0

SA

ND

FIG

HT

ER

6/3

W/G

Yes

615-

831-

230

101-

76-6

6

615-

34X

-31

or61

5-34

X-3

1H

236-

6139

015

460

31.

1520

.823

.713

3.0

ST

D10

/3W

/GN

o61

5-83

1-46

010

1-76

-66

236-

6138

115

460

31.

1520

.823

.713

3.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

615-

831-

460

101-

76-6

6

236-

6239

015

575

31.

1516

.619

.010

6.0

ST

D10

/3W

/GN

o61

5-83

1-57

510

1-76

-66

236-

6238

115

575

31.

1516

.619

.010

6.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

615-

831-

575

101-

76-6

6

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

5 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E

Not

e: I

mpe

ller

# 3

NO

T r

ecom

men

ded

for

fixe

d sp

eed

appl

icat

ions

.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

7-1/

2 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

10 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E

Not

e: I

mpe

ller

4+

is N

OT

rec

omm

ende

d fo

r fi

xed

spee

d ap

plic

atio

ns.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

ST

AN

DA

RD

6"

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

15 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E




SINGLE PHASE CONTROL PANELS:Franklin Control Panels are reliable "Workhorses" for your commercial oragricultural installations. Start capacitors provide high torque start-ups, whilemotor matched run capacitors offer smooth, quiet, efficient motor operation. Manual reset overloads protect your motor and pumping equipment from abnormalconditions. Control Panels have a magnetic contactor and large terminal blocks.

Note: Carry recommends the use of Franklin Electric single phase control panelswith Carry single phase pumps and 3-wire motors. The start and run capacitors arehoused in the control panel, not the motor. The pump will not operate withoutthese capacitors. See Accessories Section, page 36 for more details on SinglePhase Control Panels.

THREE PHASE CONTROL PANELS:Carry designed Three Phase control panelsfeature NEMA 3R enclosures, IEC adjustablemotor starters, disconnects, time delays, circuitbreakers, transformers and switches.

Franklin Three Phase control panels are simpleand functional controls with NEMA 3Renclosures, main circuit breaker disconnects,universal transformers, contactors, overloadsand Hand-Off-Auto switches.


VARIABLE FREQUENCY DRIVE PACKAGES:Carry has developed a package that includes a Variable Frequency Drive in a NEMA 4fiberglass enclosure along with a pressure level transducer, flow sensor and lightningarrestor to operate in pumping applications. These packages allow you to achieve higherflow rates with lower horsepower and smaller sumps. These packages can be used withSingle Phase or Three Phase input power to operate a Three Phase pump. SeeAccessories Section, page 75 for more details on Variable FrequencyDrives and packages.


PVC STRAINER SCREENS:PVC Strainer Screens are available for vertical and horizontal pumps. They aredesigned to allow for water flow while restricting debris from reaching the pump. They are made of SDR35 PVC pipe and high density polyethylene for light weightdurability. See the Accessories Section, page 1 for more details on PVC StrainerScreens.

Carry Designed Panel Franklin Panel




SPECIFICATIONS:

5 Horsepower




Impeller No. 1 Impeller No. 2 or Impeller No. 3


Motor: A Franklin Electric Super-6" Submersible Motor; rated 5 Horsepower with a service factorof 1.15 (1.0 for 3 PH, 380 V, 50 Hz); thrust capacity of 1500 pounds; RPM of 3450 (2875for 3 PH, 380 V, 50 Hz); corrosion-resistant construction; double flange design; stainlesssteel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator;resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrustbearing; pressure-equalizing diaphragm; sand fighter slinger; and copper bar rotor.





Lead: A 30' SEOW 10 AWG/3-wire with ground motor lead orA 30' SEOW 12 AWG/3-wire with ground motor lead orA 30' SEOW 14 AWG/3-wire with ground motor lead.


Lift: Axial-Flow





SPECIFICATIONS:

7-1/2 Horsepower




Impeller No. 1 or Impeller No. 2 or Impeller No. 3 or Impeller No. 4


Motor: A Franklin Electric Super-6" Submersible Motor; rated 7-1/2 Horsepower with a servicefactor of 1.15 (1.0 for 3PH/308V/50Hz); thrust capacity of 1500 pounds; RPM of 3450(2875 for 50 Hz); corrosion-resistant construction; double flanged design; stainless steelshell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resinencapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing;pressure-equalizing diaphragm; sand fighter slinger; and copper bar rotor.







Three Phase with a VFD = 200 times per 24 hour period.

Lift: Axial-Flow





SPECIFICATIONS:

10 Horsepower




Impeller No. 3 or Impeller No. 4 or Impeller No. 4+


Motor: A Franklin Electric Super-6" Submersible Motor; rated 10 Horsepower with a service factorof 1.15 (1.0 for 3PH/380V/50Hz); thrust capacity of 3500 pounds; RPM of 3450 (2875 for50 Hz); corrosion-resistant construction; double flange design; stainless steel shell; epoxycoated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulatedwindings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger and copper bar rotor.








Lift: Axial-Flow





SPECIFICATIONS:

15 Horsepower




Impeller No. 4+


Motor: A Franklin Electric Super-6" Submersible Motor; rated 15 Horsepower with a service factorof 1.15 (1.0 for 3PH/380V/50Hz); thrust capacity of 3500 pounds; RPM of 3450 (2875 for50 Hz); corrosion-resistant construction; double flange design; stainless steel shell; epoxycoated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulatedwindings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger and copper bar rotor.





Lead: A 30' SEOW 4 AWG/3-wire with ground motor lead or A 30' SEOW 6 AWG/3-wire with ground motor lead orA 30' SEOW 10 AWG/3-wire with ground motor lead.



Lift: Axial-Flow




HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS


PUMP:< Axial-Flow/Lift< Stainless Steel construction< Stainless Steel impeller, investment

casting, dynamically balanced



IMPELLER:< 8.5E Impeller: 7-1/2HP< 10E Impeller: 7-1/2 or 10HP< 12E Impeller: 7-1/2, 10 or 15HP< 14E Impeller: 10 or 15HP< 18E Impeller: 10 or 15HP


MOTOR:< Franklin Electric Super-6" Submersible< Thrust Capacity: 1500 pounds (7.5HP)< Thrust Capacity: 3500 pounds (10 &

15HP)< 3450 RPM (2875 for 50 Hz)< Corrosion-Resistant Construction< Double Flange Design< Stainless Steel Splined Shaft< Hermetically-Sealed Stator< Resin Encapsulated Windings< Stainless Steel Shell< Epoxy Coated End Frames< Filter Check Valve< Kingsbury-type Water Lubricated Thrust

Bearing< Pressure-Equalized Diaphragm< Sand Fighter Slinger< Copper Bar Rotor< Available with or without Subtrol

protection

Carry Manufacturing is introducingthe High Volume 6" CP06)Stainless Steel Axial FlowSubmersible pumps for 2016.




VERTICAL PUMP ONLY


VoltageWeight

(pounds)A-Height

B-MinimumSubmergence

7.5HP/1PH 230 199 44.00 37.75

7.5HP/3PH 200, 230, 460 or 575 172 40.25 34.00

10HP/1PH 230 214 46.00 39.75

10HP/3PH 200, 230, 460 or 575 182 41.90 35.65

15HP/1PH 230 227 48.60 42.35

15HP/3PH 200, 230, 460 or 575 205 44.00 37.75






VoltageWeight

(pounds)A-

HeightB-MinimumSubmergence

C-ScreenHeight

7.5HP/1PH 230 244 44.10 37.85 33.250

7.5HP/3PH 200, 230, 460 or 575 213 40.60 34.35 29.750

10HP/1PH 230 261 46.30 40.05 35.500

10HP/3PH 200, 230, 460 or 575 225 42.20 35.95 31.375

15HP/1PH 230 275 46.80 40.55 35.500

15HP/3PH 200, 230, 460 or 575 250 44.70 38.45 33.250Note: PVC Screens sold separately. See Accessories Section, page 1.




VERTICAL PUMP COMPONENTS:

1 Flange Bolt2 O-Ring3 Pump Shell4 Spacer Block5 Lock Washer6 Recuperator7 Impeller Bolt8 Impeller9 Motor Bolt10 Motor Lock Washer11 Motor12 Base Pad13 Base Pad Bolt

AVAILABLE OPTIONS:< Control Panels, Standard or Delux and other options, see Accessories Section, page 36.< Variable Frequency Drives, see Accessories section, page 75.< Floats, 120/230 Volt DFD, see Accessories Section, page 9.< PVC Stainer Screens, see Accessories Section, page 1.< Pump Rings, see Accessories Section, page 4.< Motor Leads, see Accessories Section, page 5.< Lift Chain and Quick Links, see Accessories Section, page 7.< Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22.< Swing Check Valves, see Accessories Section, page 28.< Flap Valves and Gates, see Accessories Section, page 29.< Quick Disconnects, see Accessories Section, page 31.< Flexible Couplers, see Accessories Section, page 35.




HORIZONTAL PUMPS:

Carry’s Stainless Steel Axial Flow Submersible pumps are also available in a horizontal style. These pumps have the same components of the vertical pumps, ie. motor, lead, impeller, recuperator,control panels, floats etc. By placing the pumps “on their side” we have reduced the minimumsubmergence height. This means that the pump is able to pump closer to the bottom of the sump pitand can be placed in much shorter sumps. These pumps are available with a PVC intake horn, witha PVC strainer screen or with a plain intake. See the following diagrams. For more informationabout intake horns and strainer screens, see the Accessories section.

Please note: horizontal pump motors typically have a shorter life expectancy than its verticalcounterpart. Franklin submersible motors are designed primarily for operation in the vertical, shaftup position. During acceleration, the pump thrust increases as its output head increases. In caseswhere the pump head stays below its normal operation range during start-up and full speedconditions, the pump may create upward thrust. This creates upward thrust on the motor up thrustbearing. This is an acceptable operation for short periods at each start, but running continuouslywith upthrust will cause excessive wear on the upthrust bearing.

As the mounting position of the motor becomes further from vertical and closer to horizontal, theprobability of shortened thrust bearing life increases. For normal motor life expectancy in horizontalpumps, we have designed the pump with a slight rise using the feet of the pump to raise thedischarge (shaft end) of the pump. Application should limit the starts to 10 within a 24 hour period.






VoltageWeight

(pounds)E-PumpLength

7.5HP/1PH 230 189 39.50

7.5HP/3PH 200, 230, 460 or 575 163 35.50

10HP/1PH 230 205 42.00

10HP/3PH 200, 230, 460 or 575 173 37.00

15HP/1PH 230 218 44.50

15HP/3PH 200, 230, 460 or 575 195 39.50






VoltageWeight

(pounds)A-PumpLength

7.5HP/1PH 230 195 51.50

7.5HP/3PH 200, 230, 460 or 575 169 49.00

10HP/1PH 230 211 53.50

10HP/3PH 200, 230, 460 or 575 179 49.00

15HP/1PH 230 224 56.00

15HP/3PH 200, 230, 460 or 575 201 51.00

Note: PVC Intake Horns sold separately. See Accessories Section, page 4.






VoltageWeight

(pounds)A-ScreenLength

B-PumpLength

7.5HP/1PH 230 234 33.250 46.50

7.5HP/3PH 200, 230, 460 or 575 204 29.750 43.00

10HP/1PH 230 252 31.375 45.50

10HP/3PH 200, 230, 460 or 575 216 31.375 45.00

15HP/1PH 230 263 35.500 49.50

15HP/3PH 200, 230, 460 or 575 243 33.250 46.50





HORIZONTAL PUMP COMPONENTS

1 Flange Bolt2 Recuperator3 Lock Washer4 Impeller Bolt5 Impeller6 O-Ring7 Motor Bolt8 Motor Lock Washer9 Motor10 Base Pad Bolt11 Front Base Pad12 Rear Base Pad13 Pump Shell

AVAILABLE OPTIONS:



CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 6

" (

CP

06)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

HP

VO

LT

SP

HA

SE

SE

RV

ICE

FA

CT

OR

FUL

LL

OA

DA

MPS

MA

XL

OA

DA

MPS

LO

CK

ED

RO

TO

RA

MPS

MO

TO

RC

OR

DSI

ZE

*S

UB

-T

RO

L

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

CP

06-0

075-

123-

X

226-

1119

07-

1/2

230

11.

15Y

36.5

B34

.4R

5.5

Y42

.1B

40.5

R5.

416

5.0

STD

8/3

W/G

No

282-

201-

9310

1-76

-67

226-

1118

07-

1/2

230

11.

15Y

36.5

B34

.4R

5.5

Y42

.1B

40.5

R5.

416

5.0

SA

ND

FIG

HT

ER

8/3

W/G

No

282-

201-

9310

1-76

-67

CP

06-0

075-

320-

X

236-

6519

07-

1/2

200

31.

1525

.128

.315

0.0

STD

10/3

W/G

No

607-

831-

200

101-

76-6

6

236-

6518

17-

1/2

200

31.

1525

.128

.315

0.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

607-

831-

200

101-

76-6

6

CP

06-0

075-

323-

X

236-

6019

07-

1/2

230

31.

1521

.824

.613

0.0

STD

10/3

W/G

No

607-

831-

230

101-

76-6

6

236-

6018

17-

1/2

230

31.

1521

.824

.613

0.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

607-

831-

230

101-

76-6

6

CP

06-0

075-

346-

X

236-

6119

07-

1/2

460

31.

1510

.912

.365

.0ST

D14

/3 W

/GN

o60

7-83

1-46

010

1-76

-66

236-

6118

17-

1/2

460

31.

1510

.912

.365

.0S

AN

DFI

GH

TE

R14

/3 W

/GY

es60

7-83

1-46

010

1-76

-66

CP

06-0

075-

357-

X

236-

6219

07-

1/2

575

31.

158.

79.

852

.0ST

D14

/3 W

/GN

o60

7-83

1-57

510

1-76

-66

236-

6218

17-

1/2

575

31.

158.

79.

852

.0S

AN

DFI

GH

TE

R14

/3 W

/GY

es60

7-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 6

" (

CP

06)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

HP

VO

LT

SP

HA

SE

SE

RV

ICE

FA

CT

OR

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MPS

MO

TO

RC

OR

DSI

ZE

*S

UB

-T

RO

L

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

CP

06-0

100-

123-

X

226-

1129

010

230

11.

15Y

44.0

B39

.5R

9.3

Y51

.0B

47.5

R8.

920

4.0

STD

6/3

W/G

No

282-

202-

9310

1-76

-67

226-

1128

010

230

11.

15Y

44.0

B39

.5R

9.3

Y51

.0B

47.5

R8.

920

4.0

SA

ND

FIG

HT

ER

6/3

W/G

No

282-

202-

9310

1-76

-67

CP

06-0

100-

320-

X

236-

6529

010

200

31.

1532

.737

.019

8.0

STD

8/3

W/G

No

610-

831-

200

101-

76-6

6

236-

6528

110

200

31.

1532

.737

.019

8.0

SA

ND

FIG

HT

ER

8/3

W/G

Yes

610-

831-

200

101-

76-6

6

CP

06-0

100-

323-

X

236-

6029

010

230

31.

1528

.432

.217

2.0

STD

8/3

W/G

No

610-

831-

230

101-

76-6

6

236-

6028

110

230

31.

1528

.432

.217

2.0

SA

ND

FIG

HT

ER

8/3

W/G

Yes

610-

831-

230

101-

76-6

6

CP

06-0

100-

346-

X

236-

6129

010

460

31.

1514

.216

.186

.0S

TD

10/3

W/G

No

610-

831-

460

101-

76-6

6

236-

6128

110

460

31.

1514

.216

.186

.0S

AN

DF

IGH

TE

R10

/3 W

/GY

es61

0-83

1-46

010

1-76

-66

CP

06-0

100-

357-

X

236-

6229

010

575

31.

1511

.412

.969

.0S

TD

10/3

W/G

No

610-

831-

575

101-

76-6

6

236-

6228

110

575

31.

1511

.412

.969

.0S

AN

DF

IGH

TE

R10

/3 W

/GY

es61

0-83

1-57

510

1-76

-66

* W

/G in

dica

tes

Wit

h G

roun

d W

ire


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 6

" (

CP

06)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PUM

PM

OD

EL

#M

OT

OR

MO

DE

L #

HP

VO

LT

SP

HA

SE

SE

RV

ICE

FA

CT

OR

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MPS

MO

TO

RC

OR

DSI

ZE

*S

UB

-T

RO

L

CO

NT

RO

LP

AN

EL

MO

DE

L #

FL

OA

TM

OD

EL

#

CP

06-0

150-

123-

X

226-

1139

015

230

11.

15Y

62.0

B52

.0R

17.5

Y75

.0B

62.5

Y16

.930

3.0

ST

D4/

3 W

/GN

o28

2-20

3-96

101-

76-6

7

226-

1138

015

230

11.

15Y

62.0

B52

.0R

17.5

Y75

.0B

62.5

Y16

.930

3.0

SA

ND

FIG

HT

ER

4/3

W/G

No

282-

203-

9610

1-76

-67

CP

06-0

150-

320-

X

236-

6539

015

200

31.

1547

.854

.430

6.0

ST

D6/

3 W

/GN

o61

5-83

1-20

010

1-76

-66

236-

6538

115

200

31.

1547

.854

.430

6.0

SA

ND

FIG

HT

ER

6/3

W/G

Yes

615-

831-

200

101-

76-6

6

CP

06-0

150-

323-

X

236-

6039

015

230

31.

1541

.647

.426

6.0

ST

D6/

3 W

/GN

o61

5-83

1-23

010

1-76

-66

236-

6038

115

230

31.

1541

.647

.426

6.0

SA

ND

FIG

HT

ER

6/3

W/G

Yes

615-

831-

230

101-

76-6

6

CP

06-0

150-

346-

X

236-

6139

015

460

31.

1520

.823

.713

3.0

ST

D10

/3W

/GN

o61

5-83

1-46

010

1-76

-66

236-

6138

115

460

31.

1520

.823

.713

3.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

615-

831-

460

101-

76-6

6

CP

06-0

150-

357-

X

236-

6239

015

575

31.

1516

.619

.010

6.0

ST

D10

/3W

/GN

o61

5-83

1-57

510

1-76

-66

236-

6238

115

575

31.

1516

.619

.010

6.0

SA

ND

FIG

HT

ER

10/3

W/G

Yes

615-

831-

575

101-

76-6

6

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 6

" (

CP

06)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

7-1/

2 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 6

" (

CP

06)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

10 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 6

"(C

P06

) D

ISC

HA

RG

E S

TO

RM

WA

TE

R M

OD

EL

S

15 H

OR

SE

PO

WE

R P

ER

FO

RM

AN

CE

CU

RV

E




SINGLE PHASE CONTROL PANELS:Franklin Control Panels are reliable "Workhorses" for your commercial oragricultural installations. Start capacitors provide high torque start-ups, whilemotor matched run capacitors offer smooth, quiet, efficient motor operation. Manual reset overloads protect your motor and pumping equipment from abnormalconditions. Control Panels have a magnetic contactor and large terminal blocks.

Note: Carry recommends the use of Franklin Electric single phase control panelswith Carry single phase pumps and 3-wire motors. The start and run capacitors arehoused in the control panel, not the motor. The pump will not operate withoutthese capacitors. See Accessories Section, page 36 for more details on SinglePhase Control Panels.

THREE PHASE CONTROL PANELS:Carry designed Three Phase control panelsfeature NEMA 3R enclosures, IEC adjustablemotor starters, disconnects, time delays, circuitbreakers, transformers and switches.

Franklin Three Phase control panels are simpleand functional controls with NEMA 3Renclosures, main circuit breaker disconnects,universal transformers, contactors, overloadsand Hand-Off-Auto switches.


VARIABLE FREQUENCY DRIVE PACKAGES:Carry has developed a package that includes a Variable Frequency Drive in a NEMA 4fiberglass enclosure along with a pressure level transducer, flow sensor and lightningarrestor to operate in pumping applications. These packages allow you to achieve higherflow rates with lower horsepower and smaller sumps. These packages can be used withSingle Phase or Three Phase input power to operate a Three Phase pump. SeeAccessories Section, page 75 for more details on Variable FrequencyDrives and packages.


PVC STRAINER SCREENS:PVC Strainer Screens are available for vertical and horizontal pumps. They aredesigned to allow for water flow while restricting debris from reaching the pump. They are made of SDR35 PVC pipe and high density polyethylene for light weightdurability. See the Accessories Section, page 1 for more details on PVC StrainerScreens.

Carry Designed Panel Franklin Panel




SPECIFICATIONS:

7-1/2 Horsepower




8.5E Impeller or 10E Impeller or 12E Impeller


Motor: A Franklin Electric Super-6" Submersible Motor; rated 7-1/2 Horsepower with a servicefactor of 1.15 (1.0 for 3PH/308V/50Hz); thrust capacity of 1500 pounds; RPM of 3450(2875 for 50 Hz); corrosion-resistant construction; double flanged design; stainless steelshell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator;resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrustbearing; pressure-equalizing diaphragm; sand fighter slinger; and copper bar rotor.

Pump Shell: A Schedule 5 304 stainless steel shell with 303 stainless steel investment casted base andcrown, and a 303 stainless steel investment cast recuperator that is CNC precisionmachined; all components are assembled using a controlled welding process.




Lead: A 30' SEOW 8 AWG/3-wire with ground motor lead orA 30' SEOW 10 AWG/3-wire with ground motor lead.



Lift: Axial-Flow





SPECIFICATIONS:

10 Horsepower




10E Impeller or 12E Impeller or 14E Impeller or 18E Impeller


Motor: A Franklin Electric Super-6" Submersible Motor; rated10 Horsepower with a service factor of 1.15 (1.0 for 3PH/380V/50Hz); thrust capacityof 3500 pounds; RPM of 3450 (2875 for 50 Hz); corrosion-resistant construction; doubleflange design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft;hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slingerand copper bar rotor.








Lift: Axial-Flow





SPECIFICATIONS:

15 Horsepower




12E Impeller or 14E Impeller or 18E Impeller


Motor: A Franklin Electric Super-6" Submersible Motor; rated 15 Horsepower with a servicefactor of 1.15 (1.0 for 3PH/380V/50Hz); thrust capacity of 3500 pounds; RPM of 3450(2875 for 50 Hz); corrosion-resistant construction; double flange design; stainless steelshell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator;resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrustbearing; pressure-equalizing diaphragm; sand fighter slinger and copper bar rotor.





Lead: A 30' SEOW 4 AWG/3-wire with ground motor lead or A 30' SEOW 6 AWG/3-wire with ground motor lead orA 30' SEOW 10 AWG/3-wire with ground motor lead.



Lift: Axial-Flow





This page intentionally left blank.





Carry Manufacturing is introducing the High Volume8" (CP08) Stainless Steel Axial Flow SubmersiblePumps for 2016. The pumps are available in thevertical style only at this time. Future enhancementswill include strainer screens and horizontal models. If you need additional information, please contact thefactory.

PUMP:< Axial-Flow/Lift< Stainless Steel construction< Stainless Steel impeller, investment casting,

dynamically balanced


60 or 50 Hz SERVICE:< Three Phase

IMPELLER:< 10E Impeller: 20HP< 13E Impeller: 20 or 25HP< 16E Impeller: 20 or 25HP


MOTOR:< Franklin Electric Super-6" Submersible< Thrust Capacity: 3500 pounds< 3450 RPM (2875 for 50 Hz)< Corrosion-Resistant Construction< Double Flange Design< Stainless Steel Splined Shaft< Hermetically-Sealed Stator< Resin Encapsulated Windings< Stainless Steel Shell< Epoxy Coated End Frames< Filter Check Valve< Kingsbury-type Water Lubricated Thrust

Bearing< Pressure-Equalized Diaphragm< Sand Fighter Slinger< Copper Bar Rotor< Available with or without Subtrol protection




VERTICAL PUMP ONLY


VoltageWeight

(pounds)A-

HeightB-MinimumSubmergence

20HP/3PH 200, 230, 460 or 575 254 43.75 37.75

25HP/3PH 200, 230, 460 or 575 267 46.00 40.00




VERTICAL PUMP COMPONENTS:

1 Flange Bolt2 Recuperator3 O-Ring4 Impeller Bolt5 Lock Washer6 Impeller7 Motor Bolt8 Motor Lock Washer9 Pump Shell10 Motor11 Spacer Block12 Base Pad13 Base Pad Bolt

AVAILABLE OPTIONS:< Variable Frequency Drives, see Accessories section, page 75.< Motor Leads, see Accessories Section, page 5.< Lift Chain and Quick Links, see Accessories Section, page 7.< Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22.< Swing Check Valves, see Accessories Section, page 28.< Flap Valves and Gates, see Accessories Section, page 29.< Quick Disconnects, see Accessories Section, page 31.< Flexible Couplers, see Accessories Section, page 35.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 8

" (

CP

08)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

PU

MP

MO

DE

L #

MO

TO

RM

OD

EL

#H

PV

OL

TS

PH

AS

ES

ER

VIC

EF

AC

TO

R

FUL

LL

OA

DA

MPS

MA

X.

LO

AD

AM

PS

LO

CK

ED

RO

TO

RA

MP

SM

OT

OR

CO

RD

SIZ

E*

SU

B-

TR

OL

CP0

8-02

00-3

20-X

236-

6548

120

200

31.

1561

.969

.741

6.0

SA

ND

FIG

HT

ER

4/3

W/G

YE

S

CP0

8-02

00-3

23-X

236-

6048

120

230

31.

1553

.860

.636

2.0

SA

ND

FIG

HT

ER

4/3

W/G

YE

S

CP

08-0

200-

346-

X23

6-61

481

2046

03

1.15

26.9

30.3

181.

0S

AN

DFI

GH

TE

R8/

3 W

/GY

ES

CP0

8-02

00-3

57-X

236-

6248

120

575

31.

1521

.524

.214

5.0

SA

ND

FIG

HT

ER

8/3

W/G

YE

S

CP0

8-02

50-3

20-X

236-

6558

125

200

31.

1577

.186

.355

2.0

SA

ND

FIG

HT

ER

2/3

W/G

YE

S

CP0

8-02

50-3

23-X

236-

6058

125

230

31.

1567

.076

.448

0.0

SA

ND

FIG

HT

ER

2/3

W/G

YE

S

CP0

8-02

50-3

46-X

236-

6158

125

460

31.

1533

.538

.224

0.0

SA

ND

FIG

HT

ER

8/3

W/G

YE

S

CP0

8-02

50-3

57-X

236-

6258

125

575

31.

1526

.830

.019

2.0

SA

ND

FIG

HT

ER

8/3

W/G

YE

S

* W

/G in

dica

tes

Wit

h G

roun

d W

ire.


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 8

" (

CP

08)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

20 H

OR

SE

PO

WE

R w

/ 10E

IM

PE

LL

ER

PE

RF

OR

MA

NC

E C

UR

VE


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 8

" (

CP

08)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

20 H

OR

SE

PO

WE

R w

/ 13E

IM

PE

LL

ER

PE

RF

OR

MA

NC

E C

UR

VE


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 8

" (

CP

08)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

20 H

OR

SE

PO

WE

R w

/ 16E

IM

PE

LL

ER

PE

RF

OR

MA

NC

E C

UR

VE


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 8

" (

CP

08)

DIS

CH

AR

GE

ST

OR

M W

AT

ER

MO

DE

LS

25 H

OR

SE

PO

WE

R w

/ 13E

IM

PE

LL

ER

PE

RF

OR

MA

NC

E C

UR

VE


CA

RR

Y M

AN

UF

AC

TU

RIN

G, I

NC

.S

TA

INL

ES

S S

TE

EL

AX

IAL

-FL

OW

SU

BM

ER

SIB

LE

HIG

H V

OL

UM

E 8

"(C

P08

) D

ISC

HA

RG

E S

TO

RM

WA

TE

R M

OD

EL

S

25 H

OR

SE

PO

WE

R w

/ 16E

IM

PE

LL

ER

PE

RF

OR

MA

NC

E C

UR

VE




VARIABLE FREQUENCY DRIVE PACKAGES:

Carry High Volume 8" (CP08) pumps are only available foruse with a variable frequency drive due to performancerestrictions of the motor. Carry has developed a package thatincludes a Variable Frequency Drive in a NEMA 4 fiberglassenclosure along with a pressure level transducer, flow sensorand lightning arrestor to operate in pumping applications. These packages allow you to achieve higher flow rates withlower horsepower and smaller sumps. These packages can beused with Single Phase or Three Phase input power to operatea Three Phase pump. See Accessories Section, page 75 formore details on Variable Frequency Drives and packages.

Some of the CP08 pumps require a larger variable frequencydrive than is available from Vacon. We have designed aCustom-VFD for use in this case. It will include a Cerus drivein an enclosure with a deadfront, speed potentiometer andterminals for hook up. A pressure level transducer, flow sensorand lighting arrestor will be included in the package. Operation will be similar to the Vacon units.Consult the factory for details and additional options.




SPECIFICATIONS:

20 Horsepower

Three Phase



10E Impeller 13E Impeller or 16E Impeller


Motor: A Franklin Electric Super-6" Submersible Motor; rated 20 Horsepower with a servicefactor of 1.15 (1.0 for 3 PH, 380 V, 50 Hz); thrust capacity of 3500 pounds; RPM of3450 (2875 for 3 PH, 380 V, 50 Hz); corrosion-resistant construction; double flangedesign; stainless steel shell; epoxy coated end frames; stainless steel splined shaft;hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger;and copper bar rotor.






Cycle Capacity: Three Phase with a VFD = 300 times per 24 hour period.

Lift: Axial-Flow





SPECIFICATIONS:

25 Horsepower

Three Phase



13E Impeller or 16E Impeller


Motor: A Franklin Electric Super-6" Submersible Motor; rated 25 Horsepower with a servicefactor of 1.15 (1.0 for 3PH/308V/50Hz); thrust capacity of 3500 pounds; RPM of 3450(2875 for 50 Hz); corrosion-resistant construction; double flanged design; stainless steelshell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator;resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrustbearing; pressure-equalizing diaphragm; sand fighter slinger; and copper bar rotor.






Cycle Capacity: Three Phase with a VFD = 200 times per 24 hour period.

Lift: Axial-Flow



CARRY MANUFACTURING, INC.STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE PUMPS

STORM WATER

1 HP, SINGLE PHASE, 230 VOLT

MODEL LIST WT.NUMBER: PRODUCT DESCRIPTION: PRICE: LBS.:

400-12X-31 Vertical Pump with Motor and 30' Lead Only 1,810.00 56400-12X-31H Horizontal Pump with Motor and 30' Lead Only 1,745.00 49282-300-81 1 HP, Single Phase Standard Control Panel Only 337.00 5282-300-81T 1 HP, Single Phase Delux Control Panel Only 402.00 5101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4

40440 1 HP Single Phase Vertical Strainer Screen 315.00 1340460 1 HP Single Phase Horizontal Strainer Screen 383.00 13* Available in either 2 wire with a ground or 3 wire with a ground. Please specify when ordering.* Available with either 9o or 11o 3-Blade or 13o 4-Blade Impeller. Please specify when ordering.

1 HP, THREE PHASE, 200 VOLT/230 VOLT

MODEL: LIST WT.NUMBER: PRODUCT DESCRIPTION: PRICE: LBS.:

400-32X-31 Vertical Pump with Motor and 30' Lead Only 1,670.00 56400-32X-31H Horizontal Pump with Motor and 30' Lead Only 1,605.00 49400-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,460.00 36400-831-200T Three Phase, 200 Volt Delux Control Panel Only 1,755.00 37400-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,460.00 36400-831-230T Three Phase, 230 Volt Delux Control Panel Only 1,755.00 37SSP3R-S0-J-G15 Franklin Electric 200 or 230 Volt Standard Control Panel Only 1,022.00 44SSP3R-S0-J-G15T Franklin Electric 200 or 230 Volt Delux Control Panel Only 1,152.00 44400-VFD-123 VFD Package 1PH/115V in and 3PH/230V Out includes 1,998.00 45

Drive, Transducer, Cover & 1PH Lightning Arrestor400-VFD-320 VFD Package 3PH/200V in and 3PH/200V Out includes 2,492.00 45


Drive, Transducer, Cover & 3PH Lightning Arrestor101-76-66 30' DFD 120 Volt WOP Mechanical Float 145.46 4100-60-45 30' PC N.O. Signal Master Float 49.37 3

* Available with either 9o or 11o 3-Blade or 13o 4-Blade Impeller. Please specify when ordering.* Three Phase submersible pumps are available in either 200 or 230 Volts. Please specify voltage when ordering.

40440 1 HP Three Phase Vertical Strainer Screen 315.00 1340460 1 HP Three Phase Horizontal Strainer Screen 383.00 13

400 Series

Storm - P1 Effective 02/01/2016


STORM WATER

400 Series

1 HP, THREE PHASE, 460 VOLT

MODEL LIST WT.NUMBER PRODUCT DESCRIPTION: PRICE: LBS.:

400-34X-31 Vertical Pump with Motor and 30' Lead Only 1,670.00 56400-34X-31H Horizontal Pump with Motor and 30' Lead Only 1,605.00 49400-831-460 Three Phase, 460 Volt Standard Control Panel Only 1,435.00 36400-831-460T Three Phase, 460 Volt Delux Control Panel Only 1,720.00 37SSP3R-S0-J-G15 Franklin Electric 460 Volt Standard Control Panel Only 1,022.00 44SSP3R-S0-J-G15T Franklin Electric 460 Volt Delux Control Panel Only 1,152.00 44400-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 2,716.00 45




* Available with either 9o or 11o 3-Blade or 13o 4-Blade Impeller. Please specify when ordering.



STORM WATER

401 Series

1-1/2 HP, SINGLE PHASE, 230 VOLT


401-12X-31 Vertical Pump with Motor and 30' Lead Only 2,360.00 62401-12X-31H Horizontal Pump with Motor and 30' Lead Only 2,290.00 59282-300-81 Single Phase Standard Control Panel Only 337.00 6282-300-81T Single Phase Delux Control Panel Only 402.00 6101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4* Available in either 2 wire with a ground or 3 wire with a ground. Please specify when ordering. * Available with either 13o, 17o or 23o Impeller. Please specify when ordering.

40441 1-1/2 HP Single Phase 3-Wire Vertical Strainer Screen 317.00 1440442 1-1/2 HP Single Phase 2-Wire Vertical Strainer Screen 324.00 1540461 1-1/2 HP Single Phase 3-Wire Horizontal Strainer Screen 393.00 1440462 1-1/2 HP Single Phase 2-Wire Horizontal Strainer Screen 404.00 15

1-1/2 HP, THREE PHASE, 200 VOLT/230 VOLT





Drive, Transducer, Cover & 3PH Lightning Arrestor101-76-66 30' DFD 120 Volt WOP Mechanical Float 145.46 4100-60-45 30' PC N.O. Signal Master 49.37 3

* Available with either 13o, 17o or 23o Impeller. Please specify when ordering.* Three Phase submersible pumps are available in either 200 or 230 Volts. Please specify voltage when ordering.

40440 1-1/2 HP Three Phase Vertical Strainer Screen 315.00 1340460 1-1/2 HP Three Phase Horizontal Strainer Screen 383.00 13



STORM WATER

401 Series



401-34X-31 Vertical Pump with Motor and 30' Lead Only 2,270.00 56401-34X-31H Horizontal Pump with Motor and 30' Lead Only 2,200.00 50401-831-460 Three Phase, 460 Volt Standard Control Panel Only 1,435.00 36401-831-460T Three Phase, 460 Volt Delux Control Panel Only 1,720.00 37401-831-575 Three Phase, 575 Volt Standard Control Panel Only 1,435.00 36401-831-575T Three Phase, 575 Volt Delux Control Panel Only 1,720.00 37SSP3R-S0-J-G15 Franklin Electric 460 Volt Standard Control Panel Only 1,022.00 44SSP3R-S0-J-G15T Franklin Electric 460 Volt Delux Control Panel Only 1,152.00 44401-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 3,427.00 45


Drive, Transducer, Cover & 3PH Lightning Arrestor101-76-66 30' DFD 120 Volt WOP Mechanical Float 145.46 4100-60-45 30' PC N.O. Signal Master Float 49.37 3* Available with either 13o, 17o or 23o Impeller. Please specify when ordering.* Three Phase submersible pumps are available in either 460 or 575 Volts. Please specify voltage when ordering.


Note: 575V VFD packages are also available. Contact factory for details and pricing.



STORM WATER

402 Series



402-12X-31 Vertical Pump with Motor and 30' Lead Only 2,590.00 61402-12X-31H Horizontal Pump with Motor and 30' Lead Only 2,520.00 55282-301-83 Single Phase Standard Control Panel Only 373.50 11282-301-83T Single Phase Delux Control Panel Only 438.50 11101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4

* Available with either 13o, 17o or 23o Impeller. Please specify when ordering.

40442 2 HP Single Phase Vertical Strainer Screen 324.00 1540466 2 HP Single Phase Horizontal Strainer Screen 345.00 15











STORM WATER

402 Series











STORM WATER




* Available with either 13o, 17o or 23o Impeller. Please specify when ordering.










403 Series



STORM WATER









403 Series



STORM WATER

605 Series




* Available with either No. 1 or No. 2 Impeller. Please specify when ordering.




605-32X-31 Vertical Pump with Motor and 30' Lead Only 4,890.00 148605-32X-31H Horizontal Pump with Motor and 30' Lead Only 4,720.00 139605-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,545.00 36605-831-200T Three Phase, 200 Volt Delux Control Panel Only 1,825.00 37605-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,545.00 36605-831-230T Three Phase, 230 Volt Delux Control Panel Only 1,825.00 37SSP3R-S0P-J-G40 Franklin Electric 200 Volt Standard Control Panel Only 1,040.00 44SSP3R-S0P-J-G40T Franklin Electric 200 Volt Delux Control Panel Only 1,170.00 44SSP3R-S0P-J-G30 Franklin Electric 230 Volt Standard Control Panel Only 1,040.00 44SSP3R-S0P-J-G30T Franklin Electric 230 Volt Delux Control Panel Only 1,170.00 44605-VFD-123 VFD Package 1PH/230V in and 3PH/230V Out includes 3,117.00 45




* Available with either No. 1 or No. 2 Impeller. No. 3 Impeller available for VFD systems only. Please specify when ordering.* Three Phase submersible pumps are available in either 200 or 230 Volts. Please specify voltage when ordering.




STORM WATER

605 Series






* Available with either No. 1 or No. 2 Impeller. No. 3 Impeller available for VFD systems only. Please specify when ordering.* Three Phase submersible pumps are available in either 460 or 575 Volts. Please specify voltage when ordering.





STORM WATER

607 Series




* Available with either No. 1, No. 2, No. 3 or No. 4 Impeller. Please specify when ordering.

60447 7-1/2 HP Single Phase Vertical Strainer Screen 472.00 4560467 7-1/2 HP Single Phase Horizontal Strainer Screen 561.00 45



607-32X-31 Vertical Pump with Motor and 30' Lead Only 6,040.00 155607-32X-31H Horizontal Pump with Motor and 30' Lead Only 5,910.00 146607-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,575.00 36607-831-200T Three Phase, 200 Volt Delux Control Panel Only 1,865.00 37607-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,575.00 36607-831-230T Three Phase, 230 Volt Delux Control Panel Only 1,865.00 37SSP3R-S1P-J-G50 Franklin Electric 200 or 230 Volt Standard Control Panel Only 1,327.00 44SSP3R-S1P-J-G50T Franklin Electric 200 or 230 Volt Delux Control Panel Only 1,457.00 44607-VFD-123 VFD Package 1PH/230V in and 3PH/230V Out includes 3,645.00 45




* Available with either No. 1, No. 2, No. 3 or No. 4 Impeller. Please specify when ordering.* Three Phase submersible pumps are available in either 200 or 230 Volts. Please specify voltage when ordering.




STORM WATER

607 Series






* Available with either No. 1, No. 2, No. 3 or No. 4 Impeller. Please specify when ordering.* Three Phase submersible pumps are available in either 460 or 575 Volts. Please specify voltage when ordering.





STORM WATER

610 Series



610-12X-31 Vertical Pump with Motor and 30' Lead Only 6,685.00 197610-12X-31H Horizontal Pump with Motor and 30' Lead Only 6,522.00 188282-202-93 Single Phase Standard Control Panel Only 1,104.50 13282-202-93T Single Phase Delux Control Panel Only 1,169.50 13101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4

* Available with either No. 3 or No. 4 Impeller. Please specify when ordering.




610-32X-31 Vertical Pump with Motor and 30' Lead Only 6,400.00 165610-32X-31H Horizontal Pump with Motor and 30' Lead Only 6,230.00 156610-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,735.00 36610-831-200T Three Phase, 200 Volt Delux Control Panel Only 2,020.00 37610-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,735.00 36610-831-230T Three Phase, 230 Volt Delux Control Panel Only 2,020.00 37SSP3R-S1P-J-G50 Franklin Electric 200 or 230 Volt Standard Control Panel Only 1,327.00 48SSP3R-S1P-J-G50T Franklin Electric 200 or 230 Volt Delux Control Panel Only 1,457.00 48610-VFD-123 VFD Package 1PH/230V in and 3PH/230V Out includes 3,645.00 45




* Available with either No. 3 or No. 4 Impeller. No. 4+ Impeller available for VFD systems only. Please specify when ordering.* Three Phase submersible pumps are available in either 200 or 230 Volts. Please specify voltage when ordering.




STORM WATER

610 Series



610-34X-31 Vertical Pump with Motor and 30' Lead Only 6,400.00 165610-34X-31H Horizontal Pump with Motor and 30' Lead Only 6,230.00 156610-831-460 Three Phase, 460 Volt Standard Control Panel Only 1,515.00 36610-831-460T Three Phase, 460 Volt Delux Control Panel Only 1,800.00 37610-831-575 Three Phase, 575 Volt Standard Control Panel Only 1,515.00 36610-831-575T Three Phase, 575 Volt Delux Control Panel Only 1,800.00 37SSP3R-S0P-J-G30 Franklin Electric 460 Volt Standard Control Panel Only 1,040.00 44SSP3R-S0P-J-G30T Franklin Electric 460 Volt Delux Control Panel Only 1,170.00 44610-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 5,446.00 45



* Available with either No. 3 or No. 4 Impeller. No. 4+ Impeller available for VFD systems only. Please specify when ordering.* Three Phase submersible pumps are available in either 460 or 575 Volts. Please specify voltage when ordering.





STORM WATER

615 Series



615-124-31 Vertical Pump with Motor and 30' Lead Only 7,370.00 210615-124-31H Horizontal Pump with Motor and 30' Lead Only 7,200.00 201282-203-93 Single Phase Standard Control Panel Only 1,721.50 13282-203-93T Single Phase Delux Control Panel Only 1,786.50 13101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4




615-324-31 Vertical Pump with Motor and 30' Lead Only 6,660.00 188615-324-31H Horizontal Pump with Motor and 30' Lead Only 6,510.00 178615-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,800.00 36615-831-200T Three Phase, 200 Volt Delux Control Panel Only 2,090.00 37615-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,800.00 36615-831-230T Three Phase, 230 Volt Delux Control Panel Only 2,090.00 37SSP3R-S2-J-G100 Franklin Electric 200 Volt Standard Control Panel Only 1,594.00 64SSP3R-S2-J-G100T Franklin Electric 200 Volt Delux Control Panel Only 1,724.00 64SSP3R-S2-J-G80 Franklin Electric 230 Volt Standard Control Panel Only 1,594.00 48SSP3R-S2-J-G80T Franklin Electric 230 Volt Delux Control Panel Only 1,724.00 48615-VFD-123 VFD Package 1PH/230V in and 3PH/230V Out includes 5,919.00 45




* Three Phase submersible pumps are available in either 200 or 230 Volts. Please specify voltage when ordering.




STORM WATER

615 Series



615-344-31 Vertical Pump with Motor and 30' Lead Only 6,660.00 188615-344-31H Horizontal Pump with Motor and 30' Lead Only 6,510.00 178615-831-460 Three Phase, 460 Volt Standard Control Panel Only 1,515.00 36615-831-460T Three Phase, 460 Volt Delux Control Panel Only 1,800.00 37615-831-575 Three Phase, 575 Volt Standard Control Panel Only 1,515.00 36615-831-575T Three Phase, 575 Volt Delux Control Panel Only 1,800.00 37SSP3R-S0P-J-G40 Franklin Electric 460 Volt Standard Control Panel Only 1,040.00 44SSP3R-S0P-J-G40T Franklin Electric 460 Volt Delux Control Panel Only 1,170.00 44615-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 6,296.00 45



* Three Phase submersible pumps are available in either 460 or 575 Volts. Please specify voltage when ordering.





STORM WATER

CP06 Series



CP06-0075-123-X Vertical Pump with Motor and 30' Lead Only 6,770.00 199CP06-0075-123-XH Horizontal Pump with Motor and 30' Lead Only 6,605.00 189282-201-93 Single Phase Standard Control Panel Only 757.50 13282-201-93T Single Phase Delux Control Panel Only 822.50 13101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4

* Available with either 8.5, 10 or 12 Degree Impeller. Please specify when ordering.

60447 7-1/2 HP Single Phase Vertical Strainer Screen 472.00 4560467 7-1/2 HP Single Phase Horizontal Strainer Screen 561.00 45



CP06-0075-320-X Vertical Pump with Motor and 30' Lead Only 6,625.00 172CP06-0075-320-XH Horizontal Pump with Motor and 30' Lead Only 6,500.00 163CP06-0075-323-X Vertical Pump with Motor and 30' Lead Only 6,625.00 172CP06-0075-323-XH Horizontal Pump with Motor and 30' Lead Only 6,500.00 163607-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,575.00 36607-831-200T Three Phase, 200 Volt Delux Control Panel Only 1,865.00 37607-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,575.00 36607-831-230T Three Phase, 230 Volt Delux Control Panel Only 1,865.00 37SSP3R-S1P-J-G50 Franklin Electric 200 or 230 Volt Standard Control Panel Only 1,327.00 44SSP3R-S1P-J-G50T Franklin Electric 200 or 230 Volt Delux Control Panel Only 1,457.00 44607-VFD-123 VFD Package 1PH/230V in and 3PH/230V Out includes 3,645.00 45








STORM WATER

CP06 Series



CP06-0075-346-X Vertical Pump with Motor and 30' Lead Only 6,625.00 172CP06-0075-346-XH Horizontal Pump with Motor and 30' Lead Only 6,500.00 163CP06-0075-357-X Vertical Pump with Motor and 30' Lead Only 6,625.00 172CP06-0075-357-XH Horizontal Pump with Motor and 30' Lead Only 6,500.00 163607-831-460 Three Phase, 460 Volt Standard Control Panel Only 1,490.00 36607-831-460T Three Phase, 460 Volt Delux Control Panel Only 1,770.00 37607-831-575 Three Phase, 575 Volt Standard Control Panel Only 1,490.00 36607-831-575T Three Phase, 575 Volt Delux Control Panel Only 1,770.00 37SSP3R-S0-J-G20 Franklin Electric 460 Volt Standard Control Panel Only 1,022.00 44SSP3R-S0-J-G20T Franklin Electric 460 Volt Delux Control Panel Only 1,152.00 44607-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 4,644.00 45








STORM WATER

CP06 Series



CP06-0100-123-X Vertical Pump with Motor and 30' Lead Only 7,270.00 214CP06-0100-123-XH Horizontal Pump with Motor and 30' Lead Only 7,110.00 205282-202-93 Single Phase Standard Control Panel Only 1,104.50 13282-202-93T Single Phase Delux Control Panel Only 1,169.50 13101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4

* Available with either 10, 12, 14 or 18 Degree Impeller. Please specify when ordering.




CP06-0100-320-X Vertical Pump with Motor and 30' Lead Only 6,990.00 182CP06-0100-320-XH Horizontal Pump with Motor and 30' Lead Only 6,820.00 173CP06-0100-323-X Vertical Pump with Motor and 30' Lead Only 6,990.00 182CP06-0100-323-XH Horizontal Pump with Motor and 30' Lead Only 6,820.00 173610-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,735.00 36610-831-200T Three Phase, 200 Volt Delux Control Panel Only 2,020.00 37610-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,735.00 36610-831-230T Three Phase, 230 Volt Delux Control Panel Only 2,020.00 37SSP3R-S1P-J-G50 Franklin Electric 200 or 230 Volt Standard Control Panel Only 1,327.00 48SSP3R-S1P-J-G50T Franklin Electric 200 or 230 Volt Delux Control Panel Only 1,457.00 48610-VFD-123 VFD Package 1PH/230V in and 3PH/230V Out includes 3,645.00 45








STORM WATER

CP06 Series



CP06-0100-346-X Vertical Pump with Motor and 30' Lead Only 6,990.00 182CP06-0100-346-XH Horizontal Pump with Motor and 30' Lead Only 6,820.00 173CP06-0100-357-X Vertical Pump with Motor and 30' Lead Only 6,990.00 182CP06-0100-357-XH Horizontal Pump with Motor and 30' Lead Only 6,820.00 173610-831-460 Three Phase, 460 Volt Standard Control Panel Only 1,515.00 36610-831-460T Three Phase, 460 Volt Delux Control Panel Only 1,800.00 37610-831-575 Three Phase, 575 Volt Standard Control Panel Only 1,515.00 36610-831-575T Three Phase, 575 Volt Delux Control Panel Only 1,800.00 37SSP3R-S0P-J-G30 Franklin Electric 460 Volt Standard Control Panel Only 1,040.00 44SSP3R-S0P-J-G30T Franklin Electric 460 Volt Delux Control Panel Only 1,170.00 44610-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 5,446.00 45








STORM WATER

CP06 Series



CP06-0150-123-X Vertical Pump with Motor and 30' Lead Only 7,955.00 227CP06-0150-123-XH Horizontal Pump with Motor and 30' Lead Only 7,785.00 218282-203-93 Single Phase Standard Control Panel Only 1,721.50 13282-203-93T Single Phase Delux Control Panel Only 1,786.50 13101-76-67 30' DFD 230 Volt WOP Mechanical Float 148.03 4

* Available with either 12, 14 or 18 Degree Impeller. Please specify when ordering.




CP06-0150-320-X Vertical Pump with Motor and 30' Lead Only 7,250.00 205CP06-0150-320-XH Horizontal Pump with Motor and 30' Lead Only 7,095.00 195CP06-0150-323-X Vertical Pump with Motor and 30' Lead Only 7,250.00 205CP06-0150-323-XH Horizontal Pump with Motor and 30' Lead Only 7,095.00 195615-831-200 Three Phase, 200 Volt Standard Control Panel Only 1,800.00 36615-831-200T Three Phase, 200 Volt Delux Control Panel Only 2,090.00 37615-831-230 Three Phase, 230 Volt Standard Control Panel Only 1,800.00 36615-831-230T Three Phase, 230 Volt Delux Control Panel Only 2,090.00 37SSP3R-S2-J-G100 Franklin Electric 200 Volt Standard Control Panel Only 1,594.00 64SSP3R-S2-J-G100T Franklin Electric 200 Volt Delux Control Panel Only 1,724.00 64SSP3R-S2-J-G80 Franklin Electric 230 Volt Standard Control Panel Only 1,594.00 48SSP3R-S2-J-G80T Franklin Electric 230 Volt Delux Control Panel Only 1,724.00 48615-VFD-123 VFD Package 1PH/230V in and 3PH/230V Out includes 5,919.00 45








STORM WATER

CP06 Series



CP06-0150-346-X Vertical Pump with Motor and 30' Lead Only 7,250.00 205CP06-0150-346-XH Horizontal Pump with Motor and 30' Lead Only 7,095.00 195CP06-0150-357-X Vertical Pump with Motor and 30' Lead Only 7,250.00 205CP06-0150-357-XH Horizontal Pump with Motor and 30' Lead Only 7,095.00 195615-831-460 Three Phase, 460 Volt Standard Control Panel Only 1,515.00 36615-831-460T Three Phase, 460 Volt Delux Control Panel Only 1,800.00 37615-831-575 Three Phase, 575 Volt Standard Control Panel Only 1,515.00 36615-831-575T Three Phase, 575 Volt Delux Control Panel Only 1,800.00 37SSP3R-S0P-J-G40 Franklin Electric 460 Volt Standard Control Panel Only 1,040.00 44SSP3R-S0P-J-G40T Franklin Electric 460 Volt Delux Control Panel Only 1,170.00 44615-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 6,296.00 45








STORM WATER

CP08 Series



CP08-0200-320-X Vertical Pump with Motor and 30' Lead Only 9,310.00 254CP08-0200-323-X Vertical Pump with Motor and 30' Lead Only 9,310.00 254620-VFD-123* CUSTOM VFD Package 1PH/230V in and 3PH/230V Out includes 7,592.00 275


Drive, Transducer, Cover & 3PH Lightning Arrestor620-VFD-323* CUSTOM VFD Package 3PH/230V in and 3PH/230V Out includes 5,666.00 260

Drive, Transducer, Cover & 3PH Lightning Arrestor





CP08-0200-346-X Vertical Pump with Motor and 30' Lead Only 9,310.00 254CP08-0200-357-X Vertical Pump with Motor and 30' Lead Only 9,310.00 254620-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 9,379.00 45









STORM WATER

CP08 Series



CP08-0250-320-X Vertical Pump with Motor and 30' Lead Only 9,930.00 267CP08-0250-323-X Vertical Pump with Motor and 30' Lead Only 9,930.00 267625-VFD-123* CUSTOM VFD Package 1PH/230V in and 3PH/230V Out includes 8,309.00 290



* Available with either 13 or 16 Degree Impeller. Please specify when ordering.




CP08-0250-346-X Vertical Pump with Motor and 30' Lead Only 9,930.00 267CP08-0250-357-X Vertical Pump with Motor and 30' Lead Only 9,930.00 267625-VFD-146 VFD Package 1PH/460V in and 3PH/460V Out includes 11,469.00 45





* Available with either 13 or 16 Degree Impeller. Please specify when ordering.



Documents

Server-pccData Files 6 Full Product Catalog - In ... · steel fasteners, submersible cable and quality Franklin Electric ... For more information about intake horns and strainer screens,