service - igus · 2015-10-30 · Acetic acid, 2% +– ox Acetic acid, 10% +– o Acetic acid, 90% –+o x Acetone +–o o Acetyl chloride – xx Acrylnitrile o+x – Air, liquid o

......

...plastics

serviceChemicals Table, Material Data, Online-Tools, Forms, Addresses

...plastics

1226 12273D-CAD files, prices and delivery time www.igus.euLifetime calculation, configuration and more www.igus.eu

Chemical Resistance Chemical Resistance

Chemicals, iglidur® A180, A200, G,

GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G

A350 A500, A290, J, J260 J350 H, F2, Q V400 Z B D T220 PEP xirodur® xiros® Ball Bearings

A181, J200, C500, F J2, H1, K, C160 PEEK- PP- PA-

R, UW, UW500, J3, H2, P, cage cage cage

xirodur® X, X6, J4 H370, P210

B180, xirodur® H4

xirodur® A500

F180

Acetaldehyde (aqueous), 40 % + o x + o + – x x – o x x o + – o + + + o

Acetamide (aqueous), 50 % + +1 x + +1 + – x x x +1 x x x + x +1 x + x +

Acetic acid, 2 % + – + + – + + + + + o + + – + + o + x x o

Acetic acid, 10 % + – + + – + + + + + + + + – + + o + + + –

Acetic acid, 90 % – – + o – – – x + – – + + – – – – + + + –

Acetone + + – + o + – – + – + + + o o – + + + + +

Acetyl chloride – – x x – – x x x x – x x x – x – x x x –

Acrylnitrile o + x + + o – x x – + x x – o – + + + + +

Air, liquid o o x x o o x x x o o x x x o o x x x x –

Allyl alcohol + o x + o + x x + + + x + o + + + + + + o

Aluminium chloride (aq.), 10 % o o x + o o o x + o o x x o o o o + + + o

Aluminium cleaner – – x o – – x x o x – x x – – x – x o x –

Aluminium salt from

mineral acid, 20 %o o x x o o x x x o o x x x o o x x x x o

Aluminium sulphate (aq.), 10 % o o x + o o + x + o o x + o o o o + + + o

Ammonium carbonate

(aqueous), 10 %+ +1 x + +1 + o x + + +1 x + o + + +1 + + + +

Ammonium chloride (aq.), 10 % + +1 x + +1 + + x + + +1 x + o + + +1 + + + +

Amyl acetate, 100 % – – x + – – – x + o + x + – o o o o + o –

Amyl alcohol + + x + + + + x + o + x o o + + + + + + +

Aniline (aqueous), sat’d solution o o x + o o – x + o o x x – o o o + + + o

Anisole o + x + + o – x + x + x o o o x o o + o +

Anodised liquor (HNO3 –30 %/

H2SO4 –10 %)– o x x o – x x x o o x x x – o – x x + o

Aqua regia HCI/HNO3

(75/50 vol.)o + x + + o – x x – + x x – o – + + + x +

Aromatics + + + x + + x x x o x x x x x o x x x x +

Barium chloride (aqueous), 10 % + o x + o + + x + + +1 x + – + + +1 + + + o

Barium salt from mineral acid + o x x o o x x x o o x x x o o x x x x o

Barium sulphate (aqueous), 10 % + o x + o + o x + + +1 x + o + + +1 + + + o

Benzaldehyde + o x + o o – x o – o x x – o – o + + + o

Benzoic acid (aqueous), 20 % o o x + o o – x x + o x + o o + o + + + o

Benzyl alcohol + + + + + o – + x x o x o o o x o + + + +

Biphenyl + + x x + + x x x – x x x x x – x x x x +

Bitumen, DIN 51567 + o – + o o + x x o o x + – o o o o + o o

Bleaching solution – – x + – – x x x – o x + – – – – x + x –

Bleaching solution (aqueous), 10 % – – x + – – x x + o o x + – – o – x + x –

Blue vitriol, saturated solution o o + + o o x x + x o x + o o x o x + + –

Blue vitriol, 0.5 % + o + + o + x x + x o x + o + x o x + x o

Boric acid (aqueous), 10 % + o + + o + + x x – +1 x + – – + +1 + + + o

Boring oils + + + x + + x x x + x x x x x x x x x x +

Brandy vinegar o o x + o o x x + o o x + o o o o + + + o

Bromine (aqueous), 25 % – – x + – – – x – – – x o – – – – – + – –


GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G





B180, xirodur® H4

xirodur® A500

F180

Bromine vapours – – x x – – x x x – – x x x – – – o x 0 –

Butanol + + + + + + o x + + + x o – o + + + + + +

Butter + + x + + + + x + + + x + o + + + + + + +

Butylacetate + + o + o o x x + o o x + x o o o + + + +

Butylglycol + + – + + + o x + + + x + o + + + + + + +

Butylglycolat + + x x + + x x x + x x x x x x x x x x +

Butyl phthalate + + x x + + x x x + x x x x x x x + x + +

Butyric acid o o x + o – – x + o – x + – – o – + + + o

Calcium chloride, sat’d solution + +1 x + +1 + + x + + +1 x + + + + +1 + + + +

Calcium hydroxide (aqueous) + + + x + + x x x + x x x x x x x + x + +

Calcium hypochlorite + + x x + + x x x o x x x x x o x o x o +

Camphor + + x + + + o x + x + x + o + x + + + + +

Carbon dioxide gas + + x + + + + x + + x x x – + + x + x x +

Carbonated ammonia

(aqueous), 10 %+ + x + + + x x + x x x + x + x + x + + +

Carbon disulphide + + x + + + x x + x + x x x + x + x + x +

Casein + + x x + + x x x + x x x x x x x x + + +

Catechol (aqueous), 6 % – – x + – – – x x – o x o – – – – x + x –

Caustic natron (aqueous), 50 % o o x + o o x x x x x x + o o x o x + x +

Caustic potash, 10 % o +1 + x +1 o x x x – x x x x o – x + + + –

Caustic potash, 20 % – o + + o – – x + – x x + o – – – + x + +

Caustic potash (aqueous), 40 % + + x + + + x x x x x x + x + x + x x x +

Caustic potash, 50 % – o + x o – x x x – o x x x – – – + + + o

Caustic soda (aqueous), 10 % + – + + – o x x + – o + + – – – o + + x +

Caustic soda (aqueous), 50 % o o x + o o x x x x x x + o o x o x + + –

Cellulose paint + + x x x + x x x x x x x x + + x x x x +

Chlor, chlorine water – – x x – – x x x – – x x x – – – – x – –

Chloramine x – x x – – x x x – – x x x – – – + x + –

Chlor bromine methane, 98 % x o x + o x x x x o o x x o x o x – + – o

Chlorethanal – – x x – – x x x – – x x x – – – x x x –

Chloric gas – – x – – – – x – – – o – – – – – – – – –

Chlorine hydrogen gas – – x x – – x x x – – x x x – – – + x + –

Chlorine sulfone acid (aqueous) – – x – o – – x – – – x + – – – – – – – –

Chlorine water, sat’d solution – – x + – – o x x – o + o – – – – o + o –

Chloroacetic acid (aq.), 10 % – – x + – – – x x – – x – – – – – + + + –

Chloroform – – – + o – – – o – – x o – – – – o + o –

Chromic acid (aqueous), 1 % o – x + – o o x – o o + o – o o o + + + –

Chromic acid (aqueous), 10 % – – x + – – – x – – – + o – – – – + + + –

Citric acid, concentrate dilution o o x + o o + x o x – x + o o x – + + + +

Citric acid (aqueous), 10 % + +1 + + +1 + + x + + o x + x + + o + + + +

Citrus fruits + + x x + + x x x + x, x x x x x x + + + o

Cobalt salt (aqueous) + + x x + + x x x + x x x x x x x x x + –

Cooking fats, 100 % + + + + + + x x + + + x + o + + + + + + +




GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G





B180, xirodur® H4

xirodur® A500

F180

Cooking oils + + + + + + x x + + + x + o + + + + + + +

Cresol – – x + – – – x + – – x + – – – – + x – –

Cyclohexane + + + + + + o x + – + x + – – – + + x + +

Decahydronaphthaline + + – + + + x x + – + x + – – – + – + + +

Dibutyl ether + + x x + + x x x + x x x x x x x o + – +

Dibutyl phthalate + + x + + + – x + + + x + o + + + + x o +

Dichlor benzene – + x + + – x x + – + x o x – – – o + + +

Dichlor ethene – + x + + – x x + – + x o x – – – + + o +

Dichlor ethylene – – x + – – – x + – – x + – – – – x + + +

Diethylether o o + + + + – x x + + x + o o + + o + x –

Dimethylformamide o + + + + + – x + + + + + o + + + + + o o

Dioctyl phthalate + + + + + + x x + o + x + x o o + + + + +

Dioxane o + x + + o – x + + + x + x o + o + + + +

Dioxygen gas, +23 °C,

depressurised+ + x + + + + x + + x x x – + + x + x x –

Ethanal (aqueous), 40 % + o x x o o x x x o o x x x o o x o o + –

Ethanol (aqueous), 96 % + o + + o o + x + – o + o o + – o + x o o

Ethyl acetate + + – + + + – x + – + + + o + – + + + + o

Ethylene + + x x + + x x x + x x x x x x – x + + +

Ethylene chloride + + – + + + – x + – + x + o + – + + x x +

Ethylene diamine

(1.2-Ethane diamine)+ + x + + + o x o + + + + o o x + + + + +

Ethylene glycole (aqueous), 95 % + o x + o + o x + + o + + – + + o + + + +

Ethylene oxide (1.2-Epoxy ethane) + o + x o o x x x o o x x x o o x – + + o

Fat, cooking fat + + + + + + x x + + + x + o + + + + + + +

Ferric chlorid, saturated solution + o x x o + x x + x o x + o + x o + x x +

Ferric chlorid, 2.5 % + o x x o + x x + x o x + o + x o x o + +

Ferric chlorid, 5 % – o x o o – o x + x o x + o – x – x + + –

Ferric-III-chloride (aqueous),

neutral, 10 %o +1 x o o o + x + x o x + o o x – + x x o

Ferric-III-chloride (aqueous),

sour, 10 %– – x + + – – x + – o x + – – x – + o x o

Fluorine – – + x – – x x x – – x x x – – – – + + +

Fluorinated hydrocarbons o + x + o + o x + o + x o x o o + x x – –

Formaldehyde (aqueous), 30 % + o + + o + + + + + +1 x + o + + +1 + + + –

Formamide + o – + o + o x x x o x + – o x o + + + o

Formic acid (aqueous), 2 % o – x o – – + x + o – x o – – o – + o + –

Formic acid, 10 % – – x – – – x x o – – x – – – – – + – + –

Formic acid, 90 % – – x – – – – x o – – x – – – – – + – + –

Fruit juices + + – x + + x x x + x x x x x x x + + + o

Furfurol + o x + o + o x + + + x + o + + + o x + +

Glycerine – + + + + + o x + + + x + x + + + + + + o

Glycol + o + + o o x x + + o x + o o + o + + o o


GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G





B180, xirodur® H4

xirodur® A500

F180

Heptane + + + + + + + x + o + x + – – o + + + + +

Hexa chlorine ethane + + x + + + x x x x + x o x – – – – + x –

Hexachlorobenzene + – x + – – x x x x – x o x – – – x + + +

Hexamethylphosphoracidtramid + – x x – – x x x – – x x x – –. – x + – +

Hexane + + + + + + + x + – + + + – – – + + x x –

Humic acid o o x x o o x x x o o x x x o o x + + + +

Hydrobromic acid

(aqueous), 10 %– – x + – – – x o – – x + – – – – + + + –

Hydrochloric acid, L20 – – + x – – x – x o – x x x – o – x x x –

Hydrochloric acid, 2 % – – + + – – + x – – o + + – – – – + + + –

Hydrochloric acid, 10 % – – + + – – – o – – – + + – – – – + + + –

Hydrofluoric acid (aqueous), 4 % – – – + – – – x – – – – – – – – – + + x +

Hydrogen peroxide, 0.5 % + + – + + + + o + + + + + + + + + + + + +

Hydrogen peroxide, 30 % – – – + – – – – – – – x – – – – – + + + +

Hydrogen sulphide (aqueous) + + + + o x + x + + + x + x x + x + o + –

Hydrogen sulphide (dry) + o x x o + x x x o o x x x – o o + x + o

Hydroquinone (aqueous), 5 % o – x + – o o x x o – x + – o o – + x + o

Indian ink + +1 x + +1 + + x + x +1 x + x + x +1 x + x +

Ink, dye, Color + +1 – + +1 + + x + + +1 + + + + + +1 + + – o

Iodine tincture, 3 % o – – + – o – x + x o x + – o x o + + o +

Isooctane, 80 % + + + + + + + x + o + x + – – o + + + + –

Isopropanol + + + + + + + x + + o x o o + + o + + + +

Isopropyl ether + + x + + + – x x o + x + o + o + o + + +

Ketone (aliphatic) + o + x o o x x x – o x x x o – x x + x o

Lead acetate (diluted), 10 % + o x + o + + x x o o x + – + o o + + + o

Lead stearat + + x + + + + x + + + x + o + + + x + x +

Linseed oil + + + + + + + x + + + + + – + + + + + x o

Lithium bromide/chloride/salts

(aqueous), 50 %+ o x + o + + x x o o x + – + o o x + + +

Lithium chloride in alcohol, 20 % + – x x – – x x x x – x x x – x – x + x o

Lubricating oil, mineral + + + + + + + x + o + + + – + o o x + + +

Lubricating oil, synthetic o o x + o o o x + – + + + – o – o x + x +

Magnesium chloride (aq.), 10 % + +1 x + +1 + + x + + +1 + + + + + +1 + x x o

Magnesium hydroxyde (aqueous) + +1 x + +1 + + x + + + + + + + + + + + + +

Maleic acid, concentrate solution o – x + – o o x + x o x + – o x – + + + +

Maleic acid (aqueous), 10 % – o x x o – x x x – o x x x – – – + x + o

Malt + + x x + + x x x + x x x x x x x x + + –

Manganese sulphat (aq.), 10 % + o x + o + x x + x + x + o + x + x x x +

Mercurous chloride, 6 % – – x + – – + x o o – x x – – o – + + + +

Mercury + + x + + + + x + + + + + + + + + + + o +

Methane + + + + + + + + + + x x x – + + x + x + +

Methanol + + + x + + x + x + x x x x x x x + + + +

Methanol, +20 % CaCl2 or LiCl + – x o o o – x o + o + o + + + o x x + +




GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G





B180, xirodur® H4

xirodur® A500

F180

Methyl acetate o + x + + o x x + o + x + x o o o + o x –

Methylamine + + x x + + x x x + x x x x x x x + + + +

Methylene chloride o – – x – – x – + – – + o o – – – – x + +

Methyl ethyl ketone o + – + + o – – + – + x + – o – o + x – –

Milk + +1 + + +1 + + x + + +1 + + + + + +1 + + + +

Milk acid (lactic acid), 10 % + + + + + + + x + + o x + o o o o + + + +

Milk acid (lactic acid), 90 % + o o + o o + x + o o x + o o o o + + + +

Molasses + + + x + + x + x + x x x x x x x + x + +

Molykote lubricating grease + + x + + + x x + x + x + x + x + x + + o

Mortar, cement, chalk + + x x + + x x x + x x x x x x x x + x +

Naphthalene + + x + + + o x + + + x + – + + + + x x +

Naphthalene sulfone acid – – x x – – x x x x – x x x – x – x + + +

Natrium oleate + + x x + + x x x + x x x x x x x x x x +

Natrium sulphate, 10 % + +1 x + +1 + + x + + +1 x + + + + +1 + x x +

Natrium sulphite, neutral, 2 % o +1 x + +1 o o x + o +1 x + x o o o + + + +

Natrium thiosulphate, 10 % + +1 – + +1 + + x + + +1 x + x + + +1 x + + +

Nickelsalt (aqueous), 10 % + o x x o + x x x x o x x x – x o x x + +

Nitric acid (aqueous), L50 – – x x – – x x x – – x x x – – – x + + +

Nitric acid (aqueous), 2 % – – + + – – o + – – – + + – – – – + + + –

Nitric acid (aqueous), 5 % – – x + – – – x – – – + + – – – – + + + –

Nitrio acetic acid + + x x + + x x x + x x x x x x x x x x o

Nitrobenzene o – – + – o – x o – o + – – – – – + x x +

Nitrogases – o x x o – x x x x o x x x – x – x + + –

Nitromethane – o x + o – x x o – x x + o – – – + x x +

Nitro paints, danger class A I + o x x o + x x x o o x x x – o o x x x o

Nitro paints, danger class A II + + x x + + x x x o x x x x x o x x x x o

Nitrotoluene o o x x o o x x x – o x x x o – x + + + o

Nitrous gases (dry) – o x x o – x x x o o x x x – o – – + + +

Noble gases (argon, helium, neon) + + x x + + x x x + x x x x x x x x + + +

Octane x + ? x + + x x x + x x x x x x x + x + o

Oleic acid + + x + + + + x + + + + + o + + + + – – –

Oleum – – – – – – – – – – – – – – – – – – + + +

Oxalic acid (aqueous), 10 % x o + + o x + x x + o x + – x + x + + + +

Ozon – – – + – – + x – – – x + – – – – o + + o

Palmitic acid + + x x + + x x x + x x x x x x x + + o –

Paraffin + + x x + + x x x + x x x x x x x + x + +

Paraffin oil + + + + + + + x + – + x + – – – + + x + +

Pebble hydrofluoric acid

(aqueous), 30 %x – x x – – x x x – – x x x – – – + x x o

Perchlorethene – – – + – – – – x – – x + – – – – o x + +

Perchloric acid, 10 % – – x + – – – x x – – x + – – – – + + o –

Perfume + + x x + + x x x + x x x x x x x + + + +


GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G





B180, xirodur® H4

xirodur® A500

F180

Phenol (alcoholic), 70 % – – x o – – – x + – – x + – – – – + + + –

Phenol (aqueous), 6 % – – – x – – – x + – – x + – – – – x x + –

Phenol (aqueous), 70 % – – – x – – x x x x – x x x – x – + x + –

Phenol (aqueous), 88 % + o x + o + + x o – o x + o – + o + o x –

Phosphoric acid (aqueous), 0.3 % + o x + – o + x o – o x + o – – o + + + o

Phosphoric acid (aqueous), 3 % – – – + – – o x – – – x + – – – – + + + –

Phosphoric acid (aqueous), 10 % + o x + o + o x o + o x + o + + o + + + o

Phthalic acid, saturated solution o + x + + + – x + o + x + – o o + x + + o

Polyester resin (with styrene) + + x + + + – x + + + x + o + + + + + x +

Potassium bromide (aq.), 10 % + o x + o o + x + o +1 x + – + o + + x + o

Potassium carbonate (aq.), 60 % + +1 x + +1 + + x + o +1 x + o + o + + + + o

Potassium chloride (aq.), 10 % + +1 x x +1 + x x x + x x x x x x x + + + +

Potassium chloride (aq.), 90 % + +1 x + +1 + + x + + +1 + + + + + + + x + +

Potassium dichromate (aq.), 5 % + o – + o o + x + o o x + – + o o + + + +

Potassium nitrate (aq.), 10 % + +1 x + +1 + + x + + +1 + + + + + + + + + o

Potassium permanganate

(aqueous), 1 %+ – – + – + + x – + o x + – + + o + + + +

Potassium sulphat, sat’d solution + +1 x + +1 + + x + o +1 x + o + o + + + + –

Propane, Propene + + x + + + – x + + + x + o + + + + + x +

Propenoic acid o – x x – – x x x – – x x x – – – x + + +

Propanol + + – + + + + x o + + + o o + + + + + + +

Propensäure o – x x – – x x x – – x x x – – – x + + +

Pyridine o + – + + o – x + x + x + x o x o o x x –

Pyruvic acid (aqueous), 10 % x o x x o x x x x o o x x x – o x x x x o

Resorcin

(1.3-Dihydroxybenzol), 50 %x – x x – – x x x – – x x x – – – x + + –

Salicyl acid – + – + + – + x + – + x + x – – – + x x –

Seawater + + + x + + x + x + x x x x x x x + + x o

Sebum + + x + + + + x + + + + + + + + + + + o +

Silicone oil + + + + + + + x + + + + + + + + + + + + +

Silver nitrate + +1 x + +1 + + x + o +1 x + x + o +1 + + + +

Soap solutions + +1 + + +1 + + x + + +1 + + + + + +1 + + + +

Soda solution, 10 % + +1 + + +1 + x x + + +1 x + x + + +1 + + + +

Sodium acetate (aqueous), 10 % + – x + +1 + + x + o + x + o + o + + x x –

Sodium bisuphite (aqueous), 10 % + +1 – + +1 + o x + + +1 x + x + + +1 + + + –

Sodium bromide (aqueous), 10 % + +1 x + +1 + + x + + +1 x + + + + +1 + + + +

Sodium carbonate, 5 % + +1 – + +1 + + x + + +1 x + x + + + + + + +

Sodium carbonate (aqueous),

21.5 %+ +1 – + +1 + + x + + +1 x + x + + + + + + +

Sodium carbonate (aqueous), 50 % + +1 – + +1 + + x + + +1 x + o + + + + + + +

Sodium chlorate (aqueous), 10 % + o x x o o x x x o o x x x o o x + + + +

Sodium chloride, sat’d solution + +1 x + +1 + + x + + +1 x + + + + +1 + x + o


Chemical Resistance

Resistance classification: + resistant; o conditionally resistant; – not resistant; x no data available

1 The bearings are not chemically attacked by these substances. However, there may be a dimensional change due to moisture absorption.

Chemical Resistance


GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G





B180, xirodur® H4

xirodur® A500

F180

Sodium dichromate (aqueous),

10 %x o x x o x x x x o o x x x – o x x + + +

Sodium dodecylbenzolsulfonat + + x x + + x x x + x x x x x x x + x x o

Sodium hypochlorite (aqueous),

10 % – – x + – – o x o o o x x o o o o + x + +

Sodium hypophosphite (aqueous),

10 %+ + x x + + x x x + x x x x x x x x + + –

Sodium nitrate (aqueous), 10 % + +1 – + +1 + + x + + +1 x + + + + +1 + x x +

Sodium nitrilotriacetate

(aqueous), 10 % + + x x + + x x x + x x x x x x x x + + +

Sodium salts, 10 % + + x x + + x x x + x x x x x x x x x x +

Soldering fluid – – x x – – x x x – – x x x – – – x x x –

Spirit, white + + x + + + o x + + + x + x + + + x + + o

Steam x – o + – x o x + – o o o – x – x + + + o

Styrene o + x + + o – x + – + x + – – – + o x – o

Sulphur + + x + + + + x + + + + + + + + + + + x o

Sulphur acid, 2 % – – + o – – o + o – – + + – – – – + + + +

Sulphur acid, 10 % – – + o – – o o – – – + + – – – – + – o –

Sulphuric acid

(concentrate), 98 %– – – – – – – x – – – – o – – – – o o + –

Tar + + + + + + o x + + + x + x + + + + + + +

Tetrahydrofurane (solvent) o + – + + o – x + + + + + x o + o o + + +

Tetraline + + x + + + x x + – + x + x – – + – + o +

Thionyl chloride o o – + o o – x x x o x x o o x o – + – +

Toluene o + o + + o – o + – + + + – – – + o + + +

Transformer oil + + + + + + o x + + + x + – + + + o + o +

Trichloroacetic acid (aq.), 50 % – – x x – – x x x – – x x x – – – + + o +

Trichloroethanoic – o x + o – x x + – o x o x – – – x + x o

Trichloroethylene – – – + – – – – o – – x + – – – – o x + –

Triethanolamine, 90 % + +1 – + +1 + + x + + +1 x + x + + +1 x + o –

Trisodiumphosphate, 90 % + + x + + + + x + + + x + x + + + x + x +

Uranium fluoride – – x x – – x x x – – x x x – – – x + x +

Urea + + x + + + + x + + + x + o + + + + x + +

Uric acid (aqueous), 10 % + + + x + + x x x + x x x x x x x + + + +

Urine + + + + + + + + + + + + + + + + + + x x –

Vaseline o o + + + + o x + o + x + o o + + + + + +

Violet oil + + x + + + x x + x + x + x + x + x + + o

“Washing machine cleaner”

(phosphoric and nitric acid)+ o x + o – x x + + o x + o – + – + + o +

Water glasses (Sodium silicate) + +1 x + +1 + + x + + +1 x + + + + +1 + + + –

Wax, molten + + + + + + + + + + + + + + + + + o + x +


GLW, G V0,

M250, N54,

Q2, W300,

C, L250,

L100,

igumid G





B180, xirodur® H4

xirodur® A500

F180

Wine acid o o + + o + + x + x +1 x + o o x +1 + + + –

Xylene o o + + + o – x + – + x + o – – + – + x +

Zinc chloride (aqueous), 10 % – – x + + – – x + – o x + – – x – + + – o

Zinc oxide + + x + + + + x + + + + + + + + + x + + o

Zinc sulphate (aqueous), 10 % + +1 x + +1 + + x + + +1 x + + + + +1 + + x +

The data was determined using laboratory specimens or based on comparisons with similar chemicals. Therefore, this data can only act as a reference. The chemical resis-tance of actual parts should be tested under application conditions. All data given concerns the chemical resis-

tance at room temperature. Other temperatures may lead to different classifications of the chemical resistance. The data is based on our current knowl edge. Future discove-ries may lead to changes in the classification of the che-mical resistance.


igumid G | Technical Dataiglidur® J4 | Technical Data

Material properties tableGeneral properties Unit igumid G Test methodDensity g/cm3 1.37Color blackMax. moisture absorption at +23 °C/50 % r.h. % weight 1.4 DIN 53495Max. water absorption % weight 5.6Mechanical propertiesModulus of elasticity MPa 7,800 DIN 53457Tensile strength at +20 °C MPa 240 DIN 53452Shore D hardness 79 DIN 53505Physical and thermal propertiesMax. long term application temperature °C +120Max. short term application temperature °C +180Min. short term application temperature °C –40Electrical propertiesSpecific volume resistance Ωcm > 1011 DIN IEC 93Surface resistance Ω > 1011 DIN 53482

iglidur® E7 | Technical Data iguton G | Technical Data

Material properties tableGeneral properties Unit iglidur® E7 Test methodDensity g/cm3 1.05Color dark greyMax. moisture absorption at +23 °C/50 % r.h. % weight 0.1 DIN 53495Max. water absorption % weight 0.1Mechanical propertiesModulus of elasticity MPa 1,477 DIN 53457Tensile strength at +20 °C MPa 22 DIN 53452Max. recommended surface pressure (+20 °C) MPa 18Shore D hardness 61 DIN 53505Physical and thermal propertiesMax. long term application temperature °C +70Max. short term application temperature °C +90Min. short term application temperature °C –50Electrical propertiesSurface resistance Ω > 109 DIN 53482

Material properties tableGeneral properties Unit iguton G Test methodDensity g/cm3 1.69Color brownMax. moisture absorption at +23 °C/50 % r.h. % weight 0.1 DIN 53495Max. water absorption % weight 0.2Mechanical propertiesModulus of elasticity MPa 10,200 DIN 53457Tensile strength at +20 °C MPa 140 DIN 53452Max. recommended surface pressure (+20 °C) MPa 65Shore D hardness 85 DIN 53505Physical and thermal propertiesMax. long term application temperature °C +200Max. short term application temperature °C +240Min. short term application temperature °C –40Electrical propertiesSpecific volume resistance Ωcm > 1015 DIN IEC 93Surface resistance Ω > 1014 DIN 53482

Material properties tableGeneral properties Unit iglidur® J4 Test methodDensity g/cm3 1.48Color greyMax. moisture absorption at +23 °C/50 % r.h. % weight 0.3 DIN 53495Max. water absorption % weight 1.3Coefficient of sliding friction, dynamic against steel µ 0.06–0.20pv value, max. (dry) MPa · m/s 0.3Mechanical propertiesModulus of elasticity MPa 2,350 DIN 53457Tensile strength at +20 °C MPa 70 DIN 53452Compressive strength MPa 55Max. recommended surface pressure (+20 °C) MPa 35Shore D hardness 74 DIN 53505Physical and thermal propertiesMax. long term application temperature °C +90Max. short term application temperature °C +120Min. short term application temperature °C –50Thermal conductivity W/m · K 0.25 ASTM C 177Coefficient of thermal expansion (at +23 °C) K–1 · 10–5 10 DIN 53752 Electrical propertiesSpecific volume resistance Ωcm > 1013 DIN IEC 93Surface resistance Ω > 1012 DIN 53482


RN33 | Technical Data

Material properties tableGeneral properties Unit RN33 Test methodDensity g/cm3 1.36Color blackMax. moisture absorption at +23 °C/50 % r.h. % weight 1.4 DIN 53495Max. water absorption % weight 6.0Mechanical propertiesModulus of elasticity MPa 3,200 DIN 53457Tensile strength at +20 °C MPa 80 DIN 53452Max. recommended surface pressure (+20 °C) MPa 60Shore D hardness 77 DIN 53505Physical and thermal propertiesMax. long term application temperature °C +90Max. short term application temperature °C +120Min. short term application temperature °C –40Electrical propertiesSpecific volume resistance Ωcm ~ 1011 DIN IEC 93Surface resistance Ω ~ 1011 DIN 53482

POM black | Technical Data

Material properties tableGeneral properties Unit POM black Test methodDensity g/cm3 1.41Color blackMax. moisture absorption at +23 °C/50 % r.h. % weight 0.2 DIN 53495Max. water absorption % weight 1.1Mechanical propertiesModulus of elasticity MPa 1,900 DIN 53457Tensile strength at +20 °C MPa 68 DIN 53452Max. recommended surface pressure (+20 °C) MPa 23Shore D hardness 78 DIN 53505Physical and thermal propertiesMax. long term application temperature °C +90Max. short term application temperature °C +120Min. short term application temperature °C –50Electrical propertiesSpecific volume resistance Ωcm > 1012 DIN IEC 93Surface resistance Ω > 1012 DIN 53482

iglidur® L100 | Technical Data

Material properties tableGeneral properties Unit iglidur® L100 Test methodDensity g/cm3 1.35Color yellowMax. moisture absorption at +23 °C/50 % r.h. % weight 0.7 DIN 53495Max. water absorption % weight 5.2Mechanical propertiesModulus of elasticity MPa 5,500 DIN 53457Tensile strength at +20 °C MPa 150 DIN 53452Max. recommended surface pressure (+20 °C) MPa 70Shore D hardness 79 DIN 53505Physical and thermal propertiesMax. long term application temperature °C +100Max. short term application temperature °C +190Min. short term application temperature °C –40Electrical propertiesSpecific volume resistance Ωcm > 1013 DIN IEC 93Surface resistance Ω > 1011 DIN 53482

RN246 + RN248 | Technical Data

Material properties tableGeneral properties Einheit RN246 RN248 Test methodDensity g/cm3 1.49 1.25Color blue blackMax. moisture absorption at +23 °C/50 % r.h. % weight 2.0 1.4 DIN 53495Max. water absorption % weight 6.0 7.6Mechanical propertiesModulus of elasticity MPa 6,000 2,700 DIN 53457Tensile strength at +20 °C MPa 180 99 DIN 53452Max. recommended surface pressure (+20 °C) MPa 65 50Shore D hardness 85 – DIN 53505Physical and thermal propertiesMax. long term application temperature °C +80 +90Max. short term application temperature °C +120 +180Min. short term application temperature °C –40 –40Electrical propertiesSpecific volume resistance Ωcm > 1011 > 103 DIN IEC 93Surface resistance Ω > 1011 > 109 DIN 53482


iglidur® | Product finder & Experts

Find & comparebearingsQuickBearing

Do you need help choosing an iglidur® polymer plain bearing? Then this handy product finder will help you!First, determine the requirements for the bearing . Then enter the surface pressure and the rele-vant temperature parameter . The results are displayed according to suitability at the bottom .

www.igus.eu/iglidurquick

Calculate the bearings lifetimeQuickLife

Calculate the service life of your required mainte-nance free iglidur® plain bearing online. Select the measuring unit and the bearing type . Select the required dimensions or enter the part number. Please enter the relevant information page for page . You will find instructions at the bottom of each page . The results are specified as service life in hours .

www.igus.eu/iglidurlife

igubal® | Product finder & Experts

Find spherical bearings QuickBearing

The igubal® product finder helps you to quicklyfind the right bearing.Choose from a wide range, the bearing type , the measuring unit and the right thread . Enter the temperature and the maximum tilt angle , and also the diameter of the inner bearing and any other requirements. The results are shown below .

www.igus.eu/igubalquick

Calculate the spherical bearings lifetimeQuickLife

You only need to specify a few details regarding the use of your igubal® bearings, and then the life of the product will be determined.Choose from the available options the pro-duct of your choice, the load, product option , and the operating conditions. Then enter the operating temperature and forces, followed by the daily duration of use and the proportion of operation . The calculation is performed by a mouse click , the results are shown below on the page.

www.igus.eu/iguballife


Easily calculate the service life of your required linear guide and configure with a few clicks.Select a drylin® system and add the relevant environmental parameters . Then select the bearing size, carriages, number and position. Then enter the distance between the rails and the mounting.By clicking and dragging the colored crosshair , define the coordinates for the drive point and center of gravity or enter them via the keyboard . Define weight, acceleration and distance of the bearing and select a rail length. The results are shown .

www.igus.eu/drylinlife

drylin® SHT | Product finder drylin® | Experts

Find & comparelinear tables QuickLin

Configure & calculate lifetime of bearingsQuickLin

Aren’t you sure which drylin® product is right for you? With a few clicks, you can specify the requi-rements for your drylin® application and immedi-ately receive a selection that suits your needs best.Select the application and use the regulator to select load, feed rate , stroke length, tempera-ture, precision class , dead weight and stres-sing capacity. Select by clicking on the boxes other required performance features and requi-rements . The results are shown below and be compared .

www.igus.eu/quicklin


✂ ✂

iglidur® | Analysis igubal® | Analysis

Date: Phone: +49 2203 9649-145Fax: +49 2203 9649-334

From: To:igus® GmbHP.O. Box 906123, 51127 CologneSpicher Straße 1a, 51147 Cologne

Phone: GermanyFax:

Dimensions: What type of bearing are you currently using?

Shaft diameter (mm): ....................................................... iglidur®

Bearing length (mm): ....................................................... steel backed PTFE bearingBearing wall thickness (mm): ........................................... oil filled sintered bronze bearingBearing load (N): .............................................................. anti-friction bearing

Running speed (m/s): ...................................................... other

Type of motion: Which problem can iglidur® solve for you?

rotating with ...................................................... U/min dry running chemicals

oscillating with ................................................ degrees abrasion firmness temperatures

linear with ...................................................mm stroke edge pressing dirt, dust, ...

Rate (1/min): .................................................................... vibration dampening cost reduction

Other load characteristics: ...............................................Lubrication: .........................................................................................

dry Drawing:

oil

grease

water

Ambient temperature (°C) ................................................Surrounding media (e.g. acids, water, alkalines etc.): ................................................................................................Sliding surface (e. g. steel, plastic): ...........................................................................................................................Average roughness Ra: ....................................................Housing material: .............................................................Intermittent rating: ............................................................Run time (s): ....................................................................Down time (s): .................................................................Target service life: ............................................................

Please enter as much information as possible. If you prefer other measuring units, cross out the given unit and write your units next to it. Most applications questions can be answered with minimal data. Please call for further information (Phone: +49 [0] 22 03/96 49-1 45).

Date: Phone: +49 2203 9649-145Fax: +49 2203 9649-334


Phone: GermanyFax:

Please enter as much information as possible. If you prefer other measuring units, cross out the given unit and write your units next to it. Most applications questions can be answered with minimal data. Please call for further information (Phone: +49 [0] 22 03/96 49-1 45).

Rod ends type A (male thread) Average roughness Ra: ....................................................

Rod ends type B (female thread) Target service life (hrs): .....................................................

Pillow block Current typ: .....................................................................

Spherical bearing .........................................................................................

Flange bearing 2-hole Surrounding media (e.g. acids, water, alkalines): ..............

4-hole .........................................................................................

Clevis Joints with pin and clip

with spring-loaded pin Which problem can igubal® solve for you?

Dimensional series E dry running chemicals

K corrosion dirtThread pitch Standard thread vibration dampening dust

Fine thread cost-reduction weight

Speed (m/s; rpm): ............................................................ Other load characteristics: ........................................................................................................................................

Type of movements: Drawing:

rotating

oscillating with ................................................ degrees

linear

Lubrication:

dry

oil

grease

water

Shaft diameter (mm/Inch): .........................................................................................................................................Bearing load (N): ..............................................................Ambient temperature (°C): ...............................................

Shaft material (z. B. steel, 303 stainless, plastic): .......................................................................................................

All calculations also online with our expert system page 1238 All calculations also online with our expert system page 1239


✂ ✂

sx

ay

Faaz

yzx

Fssz

b

WX

ay

sx

szsz

az

FsFa

y

zx

az

ay

sy

Fa

Fs x

yz

Fs

b

WX

ay

az

sysy

Fa

szy

x

z

-

sx

Fs

Fa

sy

ayaz

z

yx

sx

Fs

b

WX

ay

az

sy

Fa

y

x

z

drylin® | Analysis

Horizontal Orientation

drylin® | Analysis

All calculations also online with our expert system page 1241

Application: ..................................................................................................................................................................

.....................................................................................................................................................................................

Current guide system: ..................................................................................................................................................

Orientation of system (1 = horizontal, 2 = lateral, 3 = vertical): .......................................................................................

Number of bearings per rail/shaft: .................................... Number of rails/shafts: ......................................................

Type of drive: ................................................................... Drive force [N]: ..................................................................

Average speed: ............................................................... Maximum speed: ..............................................................

Length of stroke: ............................................................. Expected service life: ........................................................

Operating time: .............................................................................................................................................................

Ambient temperature: ....................................................... Maximum temperature: .....................................................

Surrounding medium: ....................................................... Lubrication: ......................................................................

Static load: ....................................................................... Dynamic load: ..................................................................

For the following data, the drawings on next pages will help you!

Distance between bearings/carriages on a rail/shaft (wx): .............................................................................................

Distance between rails/shafts (b): ..................................................................................................................................

Distance to centre of gravity in x-direction (Sx): .............................................................................................................

Distance to centre of gravity in y-direction (Sy): .............................................................................................................

Distance to centre of gravity in z-direction (Sz): .............................................................................................................

Distance to the drive force in y-direction (ay): ................................................................................................................

Distance to the drive force in z-d (az): ...........................................................................................................................

Please enter all the data you know and if possible make sketch.

Date: Phone: +49 2203 9649-145Fax: +49 2203 9649-334


Phone: GermanyFax:

Vertical Orientation

Lateral Orientation

Floating bearing

Zero pointZero point

Zero point

Fixed bearing

Zero point

Floating bearing

Zero point

Zero point

Fixed bearing

Floating bearing

Fixed bearing


My Sketches My Sketches

1248

9

68

39

21

1 358

65 16

40

46

45

6

28

19

5624

30

31

11

60

2 5

51

55

3770

2 6

57

7

54

61

48

12

10

43

4

67

69

13

17

49

64

29

63

32

3462

22

38 18

27

36

59

8

5315

33

4835 5

6614 4750

42 20

23

44

412

8

52

igus® offices

igus® distributors

1 Germanyigus® GmbHSpicher Str. 1a51147 KölnP.O.Box 90 61 2351127 KölnPhone +49 2203 9649-0Fax +49 2203 9649-2 [email protected], www.igus.de

2 AustraliaTreotham Automation Pty. Ltd.14 Sydenham Road Brookvale NSW 2100Phone +61 2 9907-17 88Fax +61 2 [email protected]

3 Austriaigus® polymer Innovationen GmbHOrt 554843 AmpflwangPhone +43 7675 4005-0Fax +43 7675 [email protected]

4 ArgentinaBorintech SRL Av. Elcano 4971 C1427CIH Buenos Aires Phone +5411 4556 1000 Fax +5411 4556 1000 [email protected]

5 BelarusSOOO Hennlich Kharkovskaya Str. 90-8 Minsk, 220015Phone +375 17 207-1828Fax +375 17 [email protected]

6 Belgium/Luxembourgigus® B.V.B.A.Kolonel Begaultlaan 753012 WilselePhone +32 16 314431Fax +32 16 [email protected]

7 Braziligus® do Brasil Ltda.Avenida Marginal Norte da via Anhanguera 53.780Vila Rami – JundiaíCEP 13206-245 – SPPhone +55 11 3531-44 87Fax +55 11 3531-44 [email protected]

8 Bulgariaigus® EOOD2, Lui Ayer str., fl.4, off. 4 1404 Sofia, BulgariaíPhone +359 2 850 8409Fax +359 2 850 [email protected]

8 BulgariaHennlich OOD, BG4003 Plovdiv, Bulgaria 147A, Brezovsko shose Str., Rota center, fl. 3Phone +359 32 511 326Fax +359 32 621 [email protected]

9 Canadaigus® Office Canada201 Millway Ave.UNIT 25ConcordOntario L4K 5K8Phone +1 905 7608448Fax +1 905 [email protected]

10 ChileVendortecSan Martín # 2097Maipú – SantiagoPhone +56 2 [email protected]

11 Chinaigus® Shanghai Co., Ltd.No.46 Warehouse, 11 Debao Road, WGQ FTZ, Shanghai 200131, P.R.China Shanghai 200131, P.R.C.Phone +86 21 51303100Fax +86 21 [email protected]

12 ColombiaColsein LtdaParque Industrial Gran Sabana Edificio / Building 32 Tocancipá, CUN 251017Phone [email protected]

13 Costa RicaEnesa Equipos Neumaticos S.A.Del Colegio Marista 100 este, 200 sur, 25 esteUrbanizacion CiruelasAlajuela, Costa RicaPhone +506 2440-2393Fax +506 [email protected]

14 Croatiaigus® d.o.o.Ventilatorska 9 10250 Lucko Zagreb Croatia [email protected]

14 CroatiaHennlich, Industrijska d. o. o.Stupničkoobreška 17 Stupnički Obrež 10255 Gornji StupnikPhone +385 1 3 874334Fax +385 1 3 [email protected]

15 Czech RepublicHENNLICH s.r.o.Českolipská 9412 01 LitoměřicePhone e-chains® +420 416 7113 32Phone bearings +420 416 7113 39Fax +420 416 7119 [email protected]

16 Denmark

igus® ApSPostboks 2438800 ViborgPhone +45 86 603373Fax +45 86 60 32 [email protected]

16 Denmark – e-chains®

Solar A/SIndustrievej Vest 436600 VejenPhone +45 76 961200Fax +45 75 36 47 [email protected]

17 EcuadorEcuainsetecEl Zurriago E9-32 y el VengadorQuitoPhone +593 2 2253757Fax +593 2 [email protected]

18 EgyptFedicom Trading Mohamed Fayed Sami & Co.12, El Mahaad El Swissri St.,Flat 10 – 2nd Floor-ZamalekCairo – A.R of EgyptPhone +202 27362537Fax +202 [email protected]

18 EgyptIEE International Companyfor Electrical Engineering2nd floor, 25 Orabi StDown Town, CairoPhone +202 25767370Fax +202 [email protected]

19 Estoniaigus® OÜLõõtsa 4ATallinn 11415Phone +372 667 5600Fax +372 667 [email protected]

20 FinlandSKS Mekaniikka OyMartinkyläntie 5001720 VantaaPhone +358 20 7646522Fax +358 20 [email protected]

20 Finland – chainflex®

SKS Automaatio OyMartinkyläntie 5001720 VantaaPhone +358 20 7646748Fax +358 20 [email protected]

21 Franceigus® SARL49, avenue des PépinièresParc Médicis94260 FresnesPhone +33 1 49840404Fax +33 1 [email protected]

22 Greece – e-chains®

Chrismotor s.a.71, Sp. Patsi str.118 55 AthensPhone +30 210 34 25574Fax +30 210 [email protected]

22 Greece – BearingsJ. & E. Papadopoulos S.A.12 Polidefkous strPiraeus, 185 40Phone +30 210 4113133Fax +30 210 [email protected]

23 Hong KongSky Top Enterprises Ltd.Room 1707, Block C; Wah TatInd Centre; Wah Sing Street;Kwai Chung; Hong KongPhone +852 22434278Fax +852 [email protected]

24 Hungaryigus® Hungária Kft.Ipari Park u.10.1044 BudapestPhone +36 1 3066486Fax +36 1 [email protected]

24 HungaryTech-Con Kft.Vésõ utca 9-111133 BudapestPhone +36 1 4124161Fax +36 1 412 [email protected]

25 Indiaigus® (India) Pvt. Ltd.36/1, Sy No. 17/3Euro School Road,Dodda Nekkundi Industrial Area, - 2nd StageMahadevapura PostBangalore 560048Phone +91 80 45127800Fax +91 80 [email protected]

26 IndonesiaPT igus® IndonesiaGerman Centre Suite 6040-6050Jalan Kapten Subijanto Dj.BSD CityTangerang 15321 Phone +62 21 537 61 83 / [email protected]

27 IranTameen Ehtiajat Fani Tehran (TAF CO.) 62, Iranshar Ave., Unit 5 15816 Tehran, Iran Phone +98-21-8831 78 51,2 Fax +98-21-8882 02 68 [email protected]

28 Irelandigus® IrelandCaswell RdNorthampton NN4 7PWPhone +44-1604 677240Fax +44-1604 [email protected]

29 IsraelConlog LTDP.O. Box 3265 17 Hamefalssim Str. Industrial Zone Kiryat Arie Petach-Tikva 49130Phone +972 3 9269595Fax +972 3 [email protected]

30 Italyigus® S.r.l.Via delle Rovedine, 423899 Robbiate (LC)Phone +39 039 5906.1Fax +39 039 [email protected]

31 Japanigus® k.k.Arcacentral 15F, 1-2-1 Kinshi,Sumida-ku Tokyo JAPANZip 130-0013Phone +81 358 192030Fax +81 358 [email protected]

32 JordanAl Hezam AdtechAbu Alanda Street ,Building No. 1 AmmanPhone +962 64 170100 Fax: +962 64 [email protected]

33 LatviaINPAPKatrinas Str. 16Phone +371 7509404Fax +371 [email protected]

34 LebanonMecanix ShopsGebran SafiCharles Helou AvenueBeirutPhone +961 1 486701Fax +961 1 [email protected]

35 LithuaniaHitech UABTerminalo g. 354469 Biruliskiu k.Kauno raj.Phone +371 67509404Fax +371 [email protected]

36 Macedonia, Albania, KosovoHennlich DOOELBoris Kidric 88 zip: 1200, Tetovo MKPhone +389 44614411Mob. +389 76 200 [email protected]

37 Malaysiaigus® Malaysia Sdn BhdNo. 19-1, Jalan PJU 1/3FSunway Mas Commercial Centre47301 Petaling JayaSelangor D.E.Phone +603 7880 5475Fax +603 7880 [email protected]

38 MoroccoAFIT5, Rue Amir Abdelkader20300 CasablancaPhone +212 522 633769Fax +212 522 [email protected]

39 Mexicoigus® México S. de R.L. de C.V.Boulevad Aeropuerto Miguel Alemán 160 Int. 135Col. Corredor Industrial Toluca Lerma Lerma, Estado de México C.P. 52004Phone +52 728284 3185Fax +52 728284 [email protected]

40 Netherlandsigus® B.V.Sterrenbergweg 93769 BS SoesterbergPhone +31 346 353932Fax +31 346 [email protected]

40 Netherlands – BearingsElcee Holland BVKamerlingh Onnesweg 28NL-3316 GL DordrechtPhone +31 78 6544777Fax +31 78 [email protected]

41 New ZealandAutomation Equipment Ltd.26 Tawn PlacePO Box 5656HamiltonPhone +64 7 8490281Fax +64 7 [email protected]

42 NorwayASI Automatikk ASIngv. Ludvigsensgate 233007 DrammenPhone +47 9006 [email protected]

43 PeruProfaco S.A.C.Calle Bolivar 388/of. 203 MirafloresLima 18 – PerúPhone +51 1 2414370Fax +51 1 [email protected]

44 PhilippinesSilicon Exponents Corp. Suite 6A, 8414 Dr. A. Santos Ave., Sucat, 1700 Paranaque CityMetro Manila Phone +63 2 8250126Fax +63 2 8250141 [email protected]

45 Polandigus® Sp. z o.o.Działkowa 121C Street 02-234 Warsaw Tel. +48 22 8635770Fax +48-22 [email protected]

46 Portugaligus® Lda.R. Eng. Ezequiel Campos, 2394100-231 PortoPhone +351 22 6109000Fax +351 22 [email protected]

igus® worldwide

47 RomaniaTechCon Industry SRLCalea Crangasi nr. 60060346 BucurestiPhone +40 21 2219-640Fax +40 21 [email protected]

47 RomaniaHennlich SRLStr. Patria, Nr17310106 AradPhone +40 257 211119Fax +40 257 [email protected]

48 RussiaOOO igus®

40/22, Nikiloyamskaya st., bldg. 4, office 509-510Moscow, [email protected]

48 RussiaOOO HennlichOzernaja 16 building 1, office 4 170008 TverPhone +7 4822630-180Fax +7 [email protected]

49 Saudi ArabiaAFIKhalaf Bin Hesham StreetBox 999831423 DammamPhone +966 38740033Fax +966 [email protected]

50 Serbia + MontenegroHennlich doo BeogradRadomira Markovica 1/311222 Beograd / SrbijaTel. : +381 11 63 098 17 Fax: +381 11 63 098 20 Mob.: +381 65 58 81 [email protected]

51 Singapore – HQ ASEANigus® Singapore Pte Ltd15 Shaw Road, #03-02Singapore 367953Phone +65 64 87-1411Fax +65-64 [email protected]

52 Slovakiaigus® Slovakia s.r.o. Fatranská 3 949 01 Nitra Slovakia Mobil: +421 949 459 409 [email protected]

52 SlovakiaHennlich s.r.o.Račianska 188 SK-831 53 BratislavaTel. +421 2 50202504Fax +421 2 [email protected]

53 Sloveniaigus® d.o.o.Tržaška c. 1341000 LjubljanaSlovenijaMobil: +386 (0)30 601 [email protected]

53 SloveniaHennlich, d. o. o.Industrijska tehnikaPodnart 33SI-4244 PodnartPhone +386 4 53206-10Fax +386 4 53206- [email protected]

54 South Africaigus® Pty. Ltd.Unit 29 Midline Business ParkCnr Le Roux & Richards DriveMidrand 1682Phone +27 11312-1848Fax +27 [email protected]

55 South Koreaigus® Korea Co. Ltd.613-14 Namchondong, Namdonggu Incheon City, 405-846Phone +82 32 82129-11Fax +82 32 [email protected]

56 Spainigus® S.L.C/ Llobatona, 6Polígono Noi del Sucre08840 Viladecans – BCNPhone +34 936 473950Fax +34 936 [email protected]

57 Swedenigus® abKnut Påls väg 8256 69 HelsingborgPhone +46 42 329270Fax +46 42 [email protected]

57 Sweden – e-chains®

OEM Automatic ABBox 1011 Dalagatan 4573 28 TranåsPhone +46 75 2424100Fax +46 75 [email protected]

57 Sweden – BearingsColly Components ABP.O. Box 76164 94 KistaPhone +46 8 7030100Fax +46 8 [email protected]

58 Switzerlandigus® Schweiz GmbHWinkelstr. 54622 EgerkingenPhone +41 62 3889797Fax +41 62 [email protected]

59 SyriaETTA SystemsAl-Hamra St. Shalan Building 12850 DamascusPhone +96 311 332 5519 Fax: +96 311 334 [email protected]

60 Taiwanigus® Taiwan Company Ltd.5F, No. 35, 24th RoadTaichung Industrial ParkTaichung 40850 Phone +886 4 2358-1000Fax +886 4 [email protected]

61 Thailandigus® Thailand Co., Ltd10 Floor, Unit C1 Thanapoom Tower 1550 New Petchaburi Road Makkasan Ratthawi Bangkok 10400 ThailandPhone/Fax +66 (0)2 652 [email protected]

61 ThailandAutoflexible Advanced Engineering Co., Ltd.111 Soi. Sukhumvit, 62/1 Sukhumvit Rd, Bangjak, Phakanong, Bangkok 10260Phone +66 2 3112111Fax +66 2 [email protected]

62 TunesiaBOUDRANT53, Avenue de Carthage1000 Tunis – TunisiaPhone +216 71340244Fax +216 [email protected]

63 TurkeyHIDREL Hidrolik ElemanlarSanayi ve Ticaret A.S.Percemli Sk. No. 7Tünel Mevkii34420 Karaköy / IstanbulPhone +90 212 2494881Fax +90 212 [email protected]

64 United Arab EmiratesUnigroup (FZE)1st floor Rasana Building M602 Sharjah Intern. Airport Freezone P.O. Box 120300Sharjah - UAEPhone +971 6 5578386Fax +971 6 [email protected]

64 United Arab EmiratesPower & Technology Trading Co. L.L.CP.O. Box 33372 SHJSharjah - UAEPhone +971 6 5421300Fax +971 6 [email protected]

65 United Kingdomigus® Caswell RdNorthampton NN4 7PWPhone +44 1604 677240Fax +44 1604 [email protected]

66 UkraineCominpro Ltd.Romena Rollana 12, Office 22061058 KharkovPhone +38 0577174914Fax +38 [email protected]

66 UkraineHennlich Ukraine LLC (HQ)Kramatorska Street 1584100 Slovyansk City, Donetsky RegionPhone +38 06262 [email protected]

67 UruguayLarrique Rulemanes SAGalicia 1204Montevideo-UruguayPhone +598 29021773Fax [email protected]

68 USAigus® inc.P.O. Box 14349East ProvidenceRI 02914Phone +1 401 4382200Fax +1 401 [email protected]

69 VenezuelaNeumatica Rotonda C.A.Prolong Av. MichelenaC.C. Atlas Locales B-10 y B-11Valencia, Edo. CaraboboPhone +58 241 832.64.64 +58 241 832.32.50 +58 241 838.88.19Fax +58 241 [email protected]

70 Vietnamigus® Singapore Pte LtdThe Representative Office in HCMCCentec TowerUnit 028, 4th Floor 72-74 Nguyen Thi Minh Khai Street, District 3, Ho Chi Minh City, VietnamPhone +84 8 6299 9197Fax +84 8 6299 [email protected]

Documents

service - igus · 2015-10-30 · Acetic acid, 2% +– ox Acetic acid, 10% +– o Acetic acid, 90% –+o x Acetone +–o o Acetyl chloride – xx Acrylnitrile o+x – Air, liquid o