36 Joo Koon Road, Singapore 628988Tel: (65) 6266 3636 Fax: (65) 6265 3635 / 6265 2801

Email: tristar@pacific.net.sgWebsite: www.tristar.com.sg

Serving Oil & Gas,Power Generation Industries,Contractors, Manufacturers,Distributors and End-Users

for 30 years

C o n t i n u o u s R e s e a r c h a n dDevelopment is part of our corporateculture. We have also developed theuse of Zinga zinc base coating withXylan PTFE top coat for fasteners.

Zinga combines the galvaniccharacteristics of a zinc coatingwith the barrier protection of apaint. It offers an excellentactive and passive protection due tothe special zinc on one hand and dueto the barrier, provided by both the zincoxides and the binder, on the otherhand.

Zinga on-site ‘painting’ is a popular zinccoating system developed in Europewhich can be used in place of Hot DipGalvanising, providing CathodicProtection to steel.

Zinga can also be coated over olddepleted Hot Dip Galvanised surfaces,extending the service life of your assets.

Environmental friendly option...

Mastergard® is our proprietary name for ceramic basecoating with Xylan top coat finish. It is a goodalternative to replace cadmium plated base coatingin projects which require environmentally friendlyspecifications. It has been tested serviceable at 4500hours.

Mastergard® is recommended for chemical, corrosionand abrasion resistant applications in aerospace andmarine industry components, automotive engine andexhaust parts.

OUR QUALITY is the best - we do not believe in furnishing low qualityproducts in order to meet the lowest price in the market. Instead weassure you that our products will outlast the rest in the market andthat means savings in the long term.

Microscopic Analyser Tensile Strength Tester

Charpy Tester Spectrometer

Our founder, Mr. T S Lim, has more than 40 yearsof accumulated knowledge in the fastenersindustry, having managed the Asian operationsof Guest, Keen & Nettlefolds Ltd (GKN), UK from1967 to 1979.

Engineers and buyers in the 60’s to early 80’swere very selective and quality conscious andthey purchased only f rom renownedmanufacturers. However, today, many traders,stockists and distributors are sourcing all overthe world at lowest possible prices withoutrealising that heat treatment issue is a majorproblem with many low quality producers. Buyerswho import from such producers and end-userswho use such products are taking a big risk.

Our petroleum studbolt materials are from OvakoSteel AyOb, Finland. We are the sole distributorfor the full range covering ASTM A193, B7, B16and A320 L7 for sizes 1-inch diameter and above.Similar diameter materials are from otherreputable mills, mainly in Europe, which haveconsistently passed our stringent in-houseinspections over the years.

- T S Lim

We manufacture:

Studbolts, Anchor/Foundation Bolts, U-Bolts, Hex Bolts, Pipe Clamps, CNC-Machined Special Fastenersfor well-head equipment, together with matching Nuts.

Our material stocks range from Carbon Steel, Alloy Steel, Stainless Steel, Super Duplex Steel, High NickelAlloy Steel to Cu/Ni/Al Alloys.

We also perform in-house Steel Heat Treatment process to ensure the exact material grades are achieved.

Our surface treatment processes include Grit Blasting, Phosphating, Plating (e.g. Zinc, Zinc Nickel, Cadmium),Hot Dip Galvanising and Coating (e.g. Xylan Fluorocarbon, Xylar Ceramic, Everslik, MolyCoat).

We are the authorised distributor for: ENERPAC Bolting Tools

We sell and rent Hydraulic Bolt Tensioning and Torqueing Tools and provide full on-site Bolting Services.

July

201

0