SERVO Industrial Grades

SERVO PRODUCT DATA SHEET

IndianOilINDUSTRIAL GREASES METAL WORKING &

SPECIALITY OILSAUTO

Compressor Oils

Servofilm Servopress

Servopress C

Servopress T

Servoprime & LP

Servoprime T & A

Servoprime LL

Servomesh SP

Servomesh EE

Servosystem 22-150

Servopress LS

Servofriz

Servosystem HLP (N)

Servosystem HLP

Gear OilsTurbine OilsHydraulic Oils Others

Servohydrex

Servoline

Servocirol

Servosystem 121-460

Servocyl C

Servocyl M

Servo SM

ServoCoat

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

FILMIn

dian

Oil

HE

AL

TH

& SA

FE

TY

These oils are unlikely to present any significant health or safety hazard w

hen properly used in the recomm

endedapplication and good standards of industrial and personal hygiene are m

aintained.

For further information please contact our nearest office O

R:

Technical Services D

ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M

ail: [email protected] O

Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

OF

ILM

32/46/68/100/121*/150/176*/220/257*/320/460

CH

AR

AC

TE

RIST

ICS

ISO V

G32

4668

81100

121*150

176*220

257*320

460K

in.Vis.

cSt @ 40°C

29–33

43 –48

64 –72

78 –86

95 –105

118 –124

145 –155

165–176

210–230

255-265

300 –340

440 -480

Viscosity

Index, Min

9595

9590

9090

9090

9090

9090

Flash Point(C

OC

),°CM

in

190190

204204

216220

230230

230232

236238

Pour Point,°C

Max.

00

00

00

00

00

00

* NO

N ISO

VG

Grade

DE

SCR

IPT

ION

Servofilm oils are highly refined straight m

ineraloils

having excellent

water

separationcharacteristics.

These are blend cuts from

solvent refined highviscosity

index base

stocks having

inherentoxidation and therm

al stability.P

ER

FO

RM

AN

CE

STA

ND

AR

DS

Servofilm oils m

eet the following specification:

•IPSS 1-09-001-81

•M

organ Construction C

o. USA

Servofilm

46 and

257 m

eet the

following

specification:•

IS: 6552 – 1972 Grade 1 and 2 respectively

with m

inor deviation in pour pointrequirem

ents

AP

PL

ICA

TIO

N

Servofilm oils suitable for use in oil film

bearingsin steel m

ills. These oils are also recom

mended

for use in circulation systems w

here non-additivetype

lubricants w

ith high

demulsibility

characteristics are required.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servofilm oils

•H

ave good

resistance to

formation

ofdeposits and sludge at norm

al operatingtem

peratures•

Rapidly separate from

water

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVOSYSTEM

22 - 150In

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M

ail:[email protected] O

R tech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

OSY

STE

M 22/32/46/57*/68/81*/100/150

CH

AR

AC

TE

RIST

ICS

GR

AD

E22

3246

57*68

81*100

150K

inematic V

iscosity, cSt @ 40°C

20-2429-33

43-4855-60

64-7278 - 85

95-105145-155

Viscosity Index, M

in95

9595

9595

9590

90Flash Point (C

OC

), °C M

in.160

190200

210210

210210

230Pour Point, °C

Max.

(-) 6(-) 6

(-) 6(-) 6

(-) 6(-) 6

(-) 6(-) 6

Rust T

est, (D-665 A

&B

, 24 hrs.)Pass

PassPass

PassPass

PassPass

Pass

* NO

N ISO

VG

DE

SCR

IPT

ION

Servosystem

oils are

anti-wear

hydraulic and

circulation oils specially formulated for efficient

lubrication of

a w

ide variety

of industrial

equipment.

Servosystem

oils are

blended from

highly refined base stocks and carefully selectedantioxidant,

anti-wear,

anti-rust and

anti-foamadditives.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S•

IS: 10522:1983 ( Reaffirm

ed 1993 )M

AN

UF

AC

TU

RE

RS A

PP

RO

VA

L•

Bharat Pum

ps & C

ompressors L

td., Naini

•H

industan Machine T

ools Ltd., B

angalore•

Kirloskar B

ros. Ltd., Pune

•H

eavyE

ngg. Corporation, R

anchi•

Revathi C

P Equipm

ents

AP

PL

ICA

TIO

NServosystem

oils are recomm

ended as fluid media

for hydraulic systems and hydraulic pum

ps evenunder

severe operating

conditions in

stationaryand

mobile

equipment.

T

hese oils

are also

recomm

ended for

circulation, splash,

bath and

ring oiling systems of the bearings (both plain and

anti-friction) and

gears of

industrial m

achinerythat require a long life lubricant. T

hese oils canbe used for chain drives and com

pressor crankcaselubrication.T

hey are not suitable for lubrication of turbinesand

silver or

silver coated

components

in any

equipment.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servosystem oils

•Provide

good w

ear- protection,

therebyprolonging service life of m

oving parts•

Possess high

film

strength properties

which help m

inimise friction and w

ear•

Provide rust-protection,

to reduce

theincidence of corrosion

•H

ave excellent

resistance to

oxidatio nthereby giving long service life

•H

ave reduced tendency to foam thereby

minim

ise the chance of noisy operationand erratic actuator response

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVOSYSTEM

121 - 460In

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


R tech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

OSY

STE

M 121/176/220/320/460

CH

AR

AC

TE

RIST

ICS

ISO V

G121*

176*220

320460

Kinem

atic Viscosity, cSt @

40°C118-124

170-180210-230

315-350440-500

Viscosity Index, M

in.90

9090

9090

Flash Point (CO

C), °C

Min

220230

230230

260Pour Point, °C

Max

(-) 3(-) 3

(-) 3(-) 3

(-) 3R

ust Test, (D

-665 A&

B, 24 hrs)

PassPass

PassPass

Pass* N

on ISO V

G

DE

SCR

IPT

ION

Servosystem oils are high quality circulation oils

designed for use in a wide variety of industrial

equipment.

These

oils are

incorporated w

ithspecially

selected sludge

dispersant, w

hichprevents the deposition of harm

ful oil-insolublesludge and varnish in circulating system

s, even o nextended service.

MA

NU

FA

CT

UR

ER

S AP

PR

OV

AL

Servosystem

oils are

approved by

the leading

machinery m

anufactures, such as:•

S.L.M

.M

aneklal Industries

Ltd.,

Ahm

edabad•

Tat R

obins-Fraser Ltd., Jam

shedpur

AP

PL

ICA

TIO

N

These oils are particularly suitable for lubrication

of anti-friction

particularly of

paper m

ill dryer

rolls, plastic film calendars and paper corrugators

where the excellent resistance of these oils, to the

formation

of harm

ful deposits,

results into

outstanding benefits. These oils find w

ide usage asgear and bearing lubricants in coal pulverizers anda

variety of

other ore

and rock

crushingm

achinery. These oils are also extensively used

for long, trouble free operation of compressors,

machine tools, hydraulic system

s, circulating oilsystem

s and

small

enclosed gears

where

EP

lubricants are not necessary.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•Provide long term

protection against rustand corrosion

•H

ave resistance to the formation of sludge

and deposits in the system•

Provide long life to moving parts due to

adequate anti-wear properties

•H

ave reduced foaming tendency

•E

nsure longer intervals between oil

changes and•

Ensure longer intervals betw

een oilchanges and system

clean ups

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

SYSTEM H

LPIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


R tech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E – SE

RV

OSY

STE

M H

LP

22, 32, 46, 68, 100, 150

CH

AR

AC

TE

RIST

ICS

ISO V

G G

RA

DE

2232

4668

100150

Kinem

atic Viscosity @

40°C, cS

t20-24

29-3343-48

64-7295-105

145 – 155V

iscosity Index, Min

100100

9895

9590

Flash Point(CO

C), °C

, Min

160200

200210

210230

Pour Point, °C, M

ax(-)21

(-)21(-)15

(-)12(-)12

(-)6E

mulsion T

est D-1401, 40-37-3, M

inutes, Max

2020

2025

2530

FZG

, Rating Stage, Failure

-10

1010

1011

DE

SCR

IPT

ION

Servosystem H

LP oils are high perform

ance hydraulicoils. T

hese oils provide superior antiwear protection,

excellent oxidation and thermal stability, outstanding

hydraulic stability

and good

demulsibility.

Servosystem

HL

P oils

also possess

superiorfilterability

characteristics.

These

oils provide

problem free service and have been found to be far

superior in

performance

compared

to other

comm

ercially available

anti-wear,

heavy duty

hydraulic oils.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

SServosystem

HL

P oils are formulated to m

eet thefollow

ingspecifications :

#D

IN 51524 Part 2

#D

EN

ISON

HF-O

#U

S STE

EL

127#

IS : 11656-1986 (Reaffirm

ed 1991)#

IS:10522-1983(R

eaffirmed 1993)

#A

TL

AS C

OPC

O R

8 & R

9, HO

ESC

H H

LP

Servosystem H

LP oils are recom

mended by the

leading equipment m

anufacturers such as :#

Atlas

Copco (India) L

td.

AP

PL

ICA

TIO

N

Servosystem H

LP oils are recom

mended as a fluid

media in hydraulic system

s, operating under extremely

severe conditions. These oils are recom

mended for

sophisticated high

performance

electro-hydraulic or

numerically controlled system

s. Servosystem H

LP oils

are also

recomm

ended for

lubrication of

screwcom

pressors requiring oil of excellent thermal stability

and low C

CR

value. These oils are not suitable w

herethe com

ponents are of silver or silver coated.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servosystem H

LP oils

#ensure long service life due to outstandingoxidation and therm

al stability.#

provide sludge

fee high

temperature

performance.

#provide

excellentfilterablit y

characteristics.#

readily separate

from

water

because of

excellent demulsibility characteristics.

#provide

superior long

term

protectionagainst rust and corrosion.

#E

nsure overall problem free

performance.

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

SYSTEM H

LP(N)

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


R tech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E – SE

RV

OSY

STE

M H

LP

(N) 22, 32, 46, 68, 100, 150

CH

AR

AC

TE

RIST

ICS

ISO V

G22

3246

68100

150K

inematic V

iscosity @ 40°C

, cSt

20-2429-33

43-4864-72

95-105145 – 155

Viscosity Index, M

in85

9595

9595

90Flash Point(C

OC

), °C, M

in160

200200

210210

230Pour Point, °C

, Max

(-)21(-)21

(-)15(-)12

(-)12(-) 18

Em

ulsion Test D

-1401, 40-37-3, Minutes, M

ax20

2020

2525

30FZ

G, R

ating Stage, Failure-

1010

1010

10

DE

SCR

IPT

ION

ServosystemH

LP(N

) oils are high performance

hydraulic oils.

T

hese oils

provide superior

antiwear

protection, excellent

oxidation and

thermal stability, outstanding hydraulic stability

and good demulsibility.

Servosystem H

LP (N

)oils

also possess

superior filterability

characteristics. These oils provide problem

freeservice and have been found to be far superior inperform

ance com

pared to

other com

mercially

available anti-wear, heavy duty hydraulic oils.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

SServosystem

HL

P (N) oils are form

ulated to meet

the following specifications :

#D

IN 51524 Part 2

#D

EN

ISON

HF-O

#U

S STE

EL

127#

IS : 11655-1986(Reaffirm

ed 1991)#

IS:10522-1983 (R

eaffirmed 1993)

ServosystemH

LP(N

) oils are recomm

ended bythe leading equipm

ent manufacturers such as :

#A

tlasC

opco (India) Ltd.

AP

PL

ICA

TIO

NServosystem

HL

P (N) oils are recom

mended as a

fluid media in hydraulic system

s, operating underextrem

ely severe

conditions.

These

oils are

recomm

ended for sophisticated high performance

electro-hydraulic or

numerically

controlledsystem

s.Servosystem

H

LP

(N)

oils are

alsorecom

mended

for lubrication

of screw

compressors

requiring oil

of excellent

thermal

stability and low C

CR

value. These oils are not

suitable where the com

ponents are of silver orsilver coated.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servosystem H

LP (N

) oils#

ensure long

service life

due to

outstandingoxidation and therm

al stability.#

provide sludge

fee high

temperature

performance.

#provide excellent filterablity characteristics.

#readily

separate from

w

ater because

ofexcellent dem

ulsibility characteristics.#

provide superior long term protection against

rust and corrosion.# E

nsure overallproblem

free performance.

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

HYD

REX

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E – SE

RV

OH

YD

RE

X 32, T

H46, 100

CH

AR

AC

TE

RIST

ICS

ISO V

G32

TH

46100

Kinem


40°C29-33

43-48100-110

Viscosity Index, M

in.160

135130

Flash Point (CO

C), °C

Min.

140200

210Pour Point, °C

Max.

(-) 39(-) 33

(-) 24R

ust Test, (D

-665 B, 24 hrs.)

PassPass

Pass

DE

SCR

IPT

ION

Servohydrex oils are anti-wear type hydraulic oils

having a very high viscosity index and low pour

point. These oils are blended w

ith high qualitybase stocks and are incorporated w

ith oxidationinhibitor

and anti-rust

additives to

give long

trouble free

service.

The

defoamant

additiveprevents build-up of foam

in the hydraulic system.

Servohydrex oils have special anti-wear additive

essential for certain hydraulicequipm

ent used forheavy duty operations.

AP

PR

OV

AL

S

•Servohydrex T

H 46 is approved by T

EL

CO

forT

ata Hitachi excavators.

•Servohydrex 100 is approved by L

&T

for usein

Poclain excavators.

AP

PL

ICA

TIO

N

Servohydrex oils are recomm

ended as fluid media

in all hydraulic systems w

here very low operating

temperatures are encountered and the application

demands use of a very high viscosity index oils.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•E

asy flow at very low

temperatures

•Suitable

for a

wide

range of

operatingtem

peratures due

to its

very high

viscosityindex

•Provide good protection against w

ear therebyprolonging service life of m

oving parts•

Possess excellent resistance to oxidation•

Have reduced foam

ing tendency•

Provide protection against rust andcorrosion

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

LINE

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

OL

INE

32/46/68/100/150/220/320/460

CH

AR

AC

TE

RIST

ICS

ISO V

G32

4668

100150

220320

460K

in. Viscosity, cSt @

40°C29-33

42-5064-72

95-105145-155

210-230300-350

440 - 480V

iscosity Index, Min

9090

9090

9090

9090

Flash Point (CO

C), °C

Min

150160

175175

204220

230250

Pour Point, °C M

ax.0

00

00

00

0R

ust Test, (D

-665A,24 hrs)

PassPass

PassPass

PassPass

PassPass

DE

SCR

IPT

ION

Servoline oils

are developed

for general

lubrication of all types of industrial machinery

using once-through lubrication system i.e. all-loss

system. T

hese oils contain film strength and anti-

rust additives to provide improved

performance.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S

Servoline oils meet the follow

ing specification:IS : 493 – 1981Part 1 (R

eaffirmed 1993)

Servoline oils

are approved

by the

leadingm

achinery manufacturers, such as:

•A

CC

Vickers B

abcock Ltd., D

urgapur•

Texm

aco Ltd., C

alcutta

AP

PL

ICA

TIO

N

Servoline oils

are recom

mended

for use

in the

lubrication system

s of

machine

tools, textile

machines

and other

machine

parts, w

hich are

lubricated by a thin film of oil. H

eavier grades ofServoline series are also used in the lubrication ofsm

all open

gears, under

light duty

conditions,w

here the oil is applied intermittently by m

eans ofan oilcan.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servoline oils

•Provide protection against corrosion andrust, even during idle periods

•M

aintain thin film of oil under light and

medium

loads•

Provide good

oiliness for

generallubrication

of m

achinery, even

underboundary lubrication conditions

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

CIRO

LIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O C

IRO

L 32/46/68/100/150

CH

AR

AC

TE

RIST

ICS

ISO V

G32

4668

100150

Kinem


40°C29-33

43-4864-72

95-105145-155

Viscosity Index, M

in95

9595

9090

Flash Point, (CO

C) °C

Min

190200

210210

230Pour Point, °C

Max

(-) 6(-) 6

(-) 6(-) 6

(-) 6R

ust Test, (D

-665 B, 24 hrs)

PassPass

PassPass

Pass

DE

SCR

IPT

ION

Servocirol oils are rust and oxidation inhibitedgrades intended for use in situations w

here longservice period is desired and im

proved anti-wear

characteristics are not essential.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S

•IS : 3098 – 1983 (R

eaffirmed 1993).

•D

IN- 51524 for hydraulic oils H

and H-L

(except very low pour point)

•U

S Steel requirement N

o. 135Servocirol 32, 46, 68 and 150 m

eet Cincinnati

Milacron, U

SA specification P-38, P-55, P-54 and

P-57 respectively.

MA

NU

FA

CT

UR

ER

S’ AP

PR

OV

AL

•C

incinnati Milacron, U

SA

AP

PL

ICA

TIO

NServocirol oils are recom

mended for:

•H

ydraulic system

s w

here anti-w

earproperties are not specifically needed

•E

nclosed industrial gear boxes where E

Plubricants are not required

•L

ubrication of

plain and

anti-frictionbearings

of turbo-feed

pumps,

turboblow

ers, etc,•

Moderate

duty, interm

ittent operating,

turbo sets

where

the oil

is generally

changed on yearly basis.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servocirol oils•

Readily

separate from

w

ater since

theyhave good dem

ulsibility•

Provide good protection against rust andcorrosion during idle periods, even underhum

id condition stability•

Help in reducing the num

ber of grades,due to its m

ulti-functional properties

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

PRESS

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O P

RE

SS 32, 68, 100, 150, 220, 320

CH

AR

AC

TE

RIST

ICS

ISO V

G32

4668

100150

220320

Kinem


40°C29-33

43-4864-72

95-105145-155

210 – 230305 – 335

Viscosity Index, M

in,95

9595

9595

9090

Flash Point (CO

C), °C

Min

190200

204210

220230

250 Pour Point, °C

Max

(-) 9(-) 9

(-) 9(-) 9

(-) 3(-) 3

(-) 3R

ust Test, (D

-665 A&

B, 24 hrs.)

PassPass

PassPass

PassPass

Pass

DE

SCR

IPT

ION

Servopress oils

are air

compressor

lubricantsspecially developed to m

inimise the incidence of

fire and explosions in modern air com

pressors.T

hese oils provide satisfactory lubrication underprolonged high tem

perature and load conditions,since

they are

exceptionally stable

and are

incorporated with antioxidant and rust inhibitor

additives.P

ER

FO

RM

AN

CE

STA

ND

AR

DS

Servopress oils meet the follow

ing specifications:•

ISO D

IS – 6521•

DIN

– 51506, VD

-L

MA

NU

FA

CT

UR

ER

S AP

PR

OV

AL

Servopress oils are approved by:

•A

tlasC

opco (India) Ltd., Pune

•K

. G. K

hosla Com

pressors (Pvt.) Ltd.,

Faridabad.

AP

PL

ICA

TIO

N

Servopress oils are suitable, not only for cylinderlubrication

of high

performance,

portable and

stationary reciprocating units, but also for rotarycom

pressors.Servopress

oils are

recomm

endedfor air com

pressor lubrication with air discharge

temperature

upto 220°C

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•Provide excellent resistance to oxidation,thus perm

itting extended oil drain intervals•

Minim

ise carbon

deposits on

the valve

plates thereby

reducing risk

of fire

andexplosion

•E

nable trouble

free starting

at low

temperatures

•Provide

effective protection

against rust

and corrosion during routine shut down

•R

educe oil consumption.

•R

educe maintenance cost, due to

minim

umcarbonisation, resulting in optim

um valve

service life and longer overhaul intervals

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

PRESS C

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O P

RE

SS C 100, C

220

CH

AR

AC

TE

RIST

ICS

ISO V

G100

220K

inematic V


95-105230-240

Flash Point, °C M

in.192

222Pour Point, °C

Max

(-) 9(-) 9

Rust T

est, (D-665 A

, 24hrs.)Pass

Pass

DE

SCR

IPT

ION

Servopress C oils are high quality, com

poundedm

ineral lubricants

that have

been specially

developed for

use in

multistage

air and

gascom

pressors handling moist air/gas.

They

have excellent

resistance to

the w

ashingaction of w

ater and maintain a strong oil film

oncom

pressor cylinder surfaces. Further more, any

carbon formed under high tem

perature conditionis

soft and

fluffy nature

having m

inimum

tendency toadhere to discharge valve and other

metal surfaces.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S

Servopress C oils are approved by the leading

machinery m

anufacturers, such as:

•B

harat Pum

ps and

Com

pressors L

td.,N

aini

AP

PL

ICA

TIO

N

Servopress C oils are recom

mended for cylinder

lubrication of

single/multistage

air com

pressorshandling

moist

air.

These

oils are

however,

generally not

recomm

ended for

crankcaselubrication.

Servopress C oil form

stable emulsion w

ith water

and hence provide excellent lubrication to cylinderliners, piston rings, valves etc., w

hile compressing

moist air/gas. T

he use of Servopress C oils enable

easy maintenance and provide long service life to

equipment.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servopress C oils

•Provide

protection against

rust and

corrosion•

Reduce carbon form

ing tendency•

Resist W

ater Washing action, since the y

maintain strong oil film

on metal surface

•E

nsure fluidity even at lowtem

peratures•

Minim

ise oil consumption

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

PRESS T

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O P

RE

SS T32, T

46, T57, T

68

CH

AR

AC

TE

RIST

ICS

ISO V

G32

4657*

68K

inematic V


29-3343-48

55 - 6064 – 72

Viscosity Index, M

in,100

9895

95Flash Point (C

OC

), °C M

in200

200204

215 Pour Point, °C

Max

(-)6(-) 6

(-) 6(-) 6

Rust T

est, (D-665 A

&B

, 24 hrs.)Pass

PassPass

PassE

mulsion T

est (AST

M D

1401), 40-37-3, Minutes, M

ax15

1520

20* N

on ISO V

G

DE

SCR

IPT

ION

Servopress oils

are new

series

of com

pressorlubricants specially form

ulated for use in rotaryvane, centrifugal and screw

compressors handling

amm

onia. These oils are based on high quality

turbine base

stocks and

carefully selected

antioxidant and

rust inhibitors,

which

are fully

compatible w

ith amm

onia. They have m

inimum

sludge forming tendency and do not turn red w

hilein contact w

ith amm

onia.

MA

NU

FA

CT

UR

ER

S AP

PR

OV

AL

Servopress T oils are approved by:

•B

harat Heavy E

lectricals Ltd., H

yderabad•

Consolidated Pneum

atic Tool C

o (I) Ltd.,

Mum

bai

AP

PL

ICA

TIO

N

Servopress T oils are suitable for turbine driven

centrifugal com

pressors having

comm

oncirculation system

for bearings, couplings and sealoil system

handling amm

onia. They can also be

used for Screw and V

ane Com

pressors in view of

their excellent oxidation stability.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•H

ave excellent resistance to oxidation, andsludge form

ation, which lead to extended

oil drain intervals.•

Provide effective

protection against

rustand corrosion.

•D

o not react with am

monia

•D

o not

turn red

while

in contact

wit h

amm

onia.•

Readily separate from

water

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVOPRESS LS

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O P

RE

SS LS 320, L

S 460

CH

AR

AC

TE

RIST

ICS

ISO V

G320

460K

inematic V


295 - 305415 – 470

Viscosity Index, M

ix.85

90Flash Point (C

OC

),°C M

in226

260Pour Point, °C

Max.

(-) 3(-) 3

DE

SCR

IPT

ION

Servopress L

S oils

are specially

developed for

cylinder lubrication

ofhigh

pressuresyn-gas

reciprocating compressors used in fertiliser plants.

This oil is blended from

carefully selected basestocks having low

sulphur content.

Synthetic gas contains Nitrogen and H

ydrogen inthe

ratio of

1: 3

The

syn-gas is

passed over

catalyst beds

inconvertor

where

temperature

prevails in

the range

of 550-570°C

. U

sage of

Servopress LS oil, due to its inherent low

sulphur,ensures a longer life of the catalyst.

AP

PL

ICA

TIO

N

Servopress LS oil is recom

mended for cylinder

lubrication ofsyn-gas

compressor

in m

ethanolplants

and am

monia

plants in

fertiliserm

anufacturing units.

T

he com

pressors are

generally slow speed, m

ulti-stage, high capacitytype

and operate

at high

temperatures

(130-150°C

).

Servopress LS oil is not intended for use as a

crankcase lubricant.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servopress LS oil

•E

nsures long

life of

catalyst, used

inconvertor

•M

inimises w

ear of cylinder liner and rings

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

FRIZ

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O F

RIZ

12, 22, 32, 46, 68, 100

CH

AR

AC

TE

RIST

ICS

ISO V

G12*

2232

4668

100K

inematic V

iscosity, cSt @ 40 °C

12-1420-24

33-3543-46

63-6590 - 100

Flash Point (CO

C), °C

Min.

140150

154160

170200

Pour Point, °C M

ax.(-) 39

(-) 45(-) 30

(-) 27(-) 24

(-) 24*

Non ISO

VG

DE

SCR

IPT

ION

Servofriz oils are high quality mineral lubricants

formulated for the lubrication of reciprocating and

rotary refrigeration compressors.

These oils possess inherent resistance to

oxidationand deposit form

ation.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

SServofriz oils m

eet the following specification:

•IS : 4578-1989

Servofriz 68

meets

Carrier

Corporation,

USA

specification No. PP 46-1

MA

NU

FA

CT

UR

ER

S AP

PR

OV

AL

Servofriz oils

are approved

by the

leadingrefrigeration com

pressor manufactures, such as:

•B

harat Heavy E

lectricals Ltd., H

yderabad•

Bharat

Pumps

and C

ompressors

Ltd.,

Naini

•Frick India L

td., Faridabad

AP

PL

ICA

TIO

NServofriz oils are recom

mended for the lubrication

of a

wide

range of

refrigeration com

pressors.T

hese oils

can be

used w

ith conventional

refrigerants, except

sulphurdi-oxide,

in both

reciprocating and rotary compressors.

They are also suitable for use in properly designed

and well m

aintained refrigeration systems, w

hereevaporator tem

peratures arelow

er than the pourpoint of the oil.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•Possess

high fluidity

at very

lowtem

peratures•

Resist deposit form

ation thereby keepingcom

pressor parts clean•

Reduce com

pressor valve maintenance due

to less deposits•

Ensure high condenser efficiency

•H

ave long

service life

due to

highoxidation and therm

al stability•

Have reduced tendency to foam

•M

inimise

copper plating

due to

theirresistance

to interact

with

metals

in the

system

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

PRIM

E & LP

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O P

RIM

E 32/46/68/100/ 32L

P/46L

P/68L

P

CH

AR

AC

TE

RIST

ICS

ISO V

G32

4657*

68100

32LP

46LP

68LP

Kinem


40°C29-33

43-4855-60

64-7295-105

29-3343-48

64-72V

iscosity lndex, Min.

10098

9595

95100

9895

Flash Point, (CO

C), °C

Min.

200200

210210

220200

200210

Pour Point, °C M

ax.(-) 6

(-) 6(-) 6

(-) 6(-) 6

(-) 30(-) 30

(-) 30N

eutralisation No. m

g KO

H/gm

0.20.2

0.20.2

0.20.2

0.20.2

Rust T

est, (D-665 A

&B

, 24 hrs.)Pass

PassPass

PassPass

PassPass

Pass * N

on ISO V

G

DE

SCR

IPT

ION

Servoprime

oils prem

ium

quality lubricants

especially form

ulated to

give outstanding

performance and long life in m

odern steam, gas

and hydraulic

turbines.Servoprim

e oils

arem

anufactured from

selectively

refined distilled

base stocks

and contain

carefully chosen

antioxidant, rust

inhibitor and

defoamant

additives.Servoprime L

P oils are special purposelow

pour turbine oils.

These oils have been tested for radiation stability

and found suitable for use in turbines exposed toradiation encountered in nuclear

power plants.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

SServoprim

e oils meet the follow

ing specification:•

Turbine oil requirem

ents of BH

EL

•B

S 489/1983•

GE

, USA

specification GE

K-27070

•IS: 1012 1987-1987 (R

eaffirmed)

MA

NU

FA

CT

UR

ER

S’ AP

PR

OV

AL

•B

harat Heavy E

lectricals Ltd., B

hopal•

Bharat H

eavy Electricals L

td., Hardw

ar

AP

PL

ICA

TIO

NServoprim

e oils are recomm

ended for use in thelubrication

system

of steam

, gas

and hydraulic

turbines operating under all service conditions. Inaddition,

Servoprime

oils give

outstandingperform

ance in

hydraulic system

s, circulating

lubrication systems, enclosed bearings and other

industrial m

achines in

which

long trouble

freeservice of lubricant is required.

Servoprime

LP

oils are meant for low

temperature applications

such as

Rotoflow

expanders

and T

urbo-com

pressors used in refrigerationapplications.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•Provide

excellent long

term

protectionagainst rust and corrosion

•R

eadily separate from w

ater•

Ensure long service life since they possess

outstanding oxidation stability•

Reduced tendency to foam

•A

ble to release entrained air at a rapid rate

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

PRIM

E T & A

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

AIL

AB

LE

– SER

VO

PR

IME

32T, 46T

, 57T*, 68T

, 32A

CH

AR

AC

TE

RIST

ICS

ISO V

32T46T

57T *

68T32A

Kinem


40°C29-33

43-4855-60

64-7229-33

Viscosity lndex, M

in.100

9895

95100

Flash Point, (CO

C), °C

Min.

200200

210210

200Pour Point, °C

Max.

(-) 6(-) 6

(-) 6(-) 6

(-) 6N

eutralisation No. m

g KO

H/gm

0.20.2

0.20.2

0.2R

ust Test, (D

-665 B, 24 hrs.)

PassPass

PassPass

PassFZ

G R

ating Failure Stage8

88

810

DE

SCR

IPT

ION

Servoprime T

oils have been specially formulated

to satisfy the demanding requirem

ents of modern

high-output steam

turbines

including their

gearunits.Servoprim

e T oils show

exceptionally goodoxidation

stability, excellent

demulsibility

andprevent foam

ing tendency. These also possess

good air release property. These properties are

retained during prolonged service life and helps ingiving outstanding perform

ance and trouble freeservice.Servoprim

e 32

A

provides extra

antiwear

andoxidation protection. T

his increases life of theload gears and prevents deposits induced troublesin critical turbine system

s.P

ER

FO

RM

AN

CE

STA

ND

AR

DS

Servoprime

T

oils exceed

the follow

ingspecifications :

#B

rown

Boveri H

TG

D 90117

#G

EK

28143A#

SIEM

EN

S (TL

U 901304)

Servoprime 32 A

is approved by the leading Gas

Turbine m

anufacturers:*

GE

CA

lsthom, France

AP

PL

ICA

TIO

NServoprim

e T oils are recom

mended for use in the

lubrication system

of

steam,

gas and

water

turbines operating

under all

service conditions.

In addition, Servoprime T

oils provide outstandingperform

ance in

hydraulic system

s, circulation

systems,

enclosed bearings

and other

industrialm

achines in which long trouble free service of

lubricant is required.

Servoprime 32 A

has been specially developed forG

EC

Alsthom

Turbines.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

#O

utstanding oxidation

and therm

al stability

that ensure long trouble free service life.#

Provide excellent antiwear protection.

#G

ive excellentlong

term

protection against

rust and corrosion.#

Prevent foaming tendency.

#R

elease entrained air quickly.#

Readily separates out w

ater.

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

PRIM

E LLIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E – SE

RV

OP

RIM

E 32 L

L, 46 L

L, 68 L

L,

CH

AR

AC

TE

RIST

ICS

ISO V

G32

4668

Kinem

atic Viscosity @

40°C29 – 35

42 – 5064 – 72

Viscosity Index, M

in100

9895

Pour Point, °C, M

ax(-) 6

(-) 6(-) 6

Flash Point, °C, M

in200

200210

Rust T

est, D-665B

, 24 hrs.Pass

PassPass

Em

ulsion Test @

54°C D

-1401, Minutes,

2020

20

DE

SCR

IPT

ION

Servoprime L

L oils are prem

ium quality turbine

oils especially formulated for long life in m

odernturbines.

Servoprime L

L oils are m

anufacturedfrom

selectively refined base stocks and containcarefully

chosen antioxidant,

rust inhibitor

anddefoam

ant additives.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S

•IS:1012-1987 (R

eaffirmed 1993)

•B

S:489-1993

MA

NU

FA

CT

UR

ER

S AP

PR

OV

AL

•B

HE

L,H

aridwar

AP

PL

ICA

TIO

N

Servoprime L

L oils are recom

mended for use in

lubrication system

of

modern

steam,

gas and

hydraulic turbines

operating under

all service

conditions.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•H

igher oxidation stability reserve, almost tw

otim

es.•

Superior antiw

ear and

extreme

pressurecharacteristic.

•E

xceeds the requirement of all national and

international specifications.•

Is a potential oil for providing problem free

long life for high severity turbines of moder n

power plants.

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

MESH

SPIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O M

ESH

SP 68/100/150/220/257/320/460/680/1000

CH

AR

AC

TE

RIST

ICS

ISO V

G68

100150

220257*

320460

6801000

Kin.V

is.cst @ 40ºC

64 -72

95 -105

145 -155

210 -230

250 -280

320 -350

420 -500

615 -660

980 -1050

Viscosity Index, M

in.90

9090

9090

9090

9080

Flash Point (CO

C),ºC

Min

204204

204232

232232

232232

280

Pour Point, °C M

ax.(-) 6

(-) 6(-) 6

(-) 3(-) 3

(-) 3(-) 3

(-) 3(+

) 6

FZG

Rating, 12th Stage

PassPass

PassPass

PassPass

PassPass

Pass* N

ON

ISO V

G

DE

SCR

IPT

ION

Servomesh

SP oils

are extrem

e pressure

typeindustrial gear lubricants. T

hese oils demonstrate

improved

thermal

stability and

oxidationresistance

over conventional

lead-naphthenateoils.

T

hey have

good dem

ulsibilitycharacteristics, low

foaming tendency and provide

rust and corrosionprotection to m

etal surfaces.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S•

AG

MA

standard 250.04•

ASL

E standard G

-315, G-1000, G

-1500 and G-

2150•

IS: 8406 – 1993•

US Steel requirem

ent No. 222 and 224

Servomesh SP 68, 100, 150, 220, 320 and 460 m

eetC

incinnati Milacron. U

SA specification N

o. P-63, P-76, P-77, P-74, P-59 &

P-35 respectively.M

AN

UF

AC

TU

RE

RS’ A

PP

RO

VA

LServom

esh SP oils are approved by•

Cincinnati M

ilacron, USA

•D

avid Brow

n Gear Industries L

td., UK

AP

PL

ICA

TIO

N Servom

esh SP oils are recomm

ended for all typesof enclosed gear drives w

ith circulation or splashlubrication

systems.

Servomesh

SP oils

areparticularly recom

mended for gear sets w

orkingunder heavy or shock load conditions. T

hese oilscan

be used

in system

s involving

gears, plain

bearings,roller

bearings and

sliding surfaces.

They are also suitable for chain drives, sprockets,

flexible couplings,

plain and

rolling elem

entbearings em

ploying splash, circulation and spraylubrication

systems

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•H

ave reduced tendency to foam•

Provide high load carrying ability•

Ensure excellent w

ear protection•

Ensure long service life since they have

good oxidation and thermal stability

•M

inimise

the form

ation of

sludge and

deposits, even

at high

bulk oil

temperatures

•E

nsure ready separation from w

ater due togood dem

ulsibility property•

Protect metals against rust and corrosion

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

MESH

EEIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E – SE

RV

OM

ESH

EE

220, 257*, 320, 460, 680

CH

AR

AC

TE

RIST

ICS

ISO V

G220

257*320

460680

Kinem

atic Viscosity @

40°C, cS

t210-230

250-280320 – 350

420 - 500615 – 660

Viscosity Index, M

in.90

9090

9090

Flash Point (CO

C), °C

, Min.

230230

232232

232Pour Point, °C

, Max

(-) 3(-) 3

(-) 3(-) 3

(-) 3R

ust test (D-665 B

)Pass

PassPass

PassPass

FZG

, Rating Stage, Pass

1212

1212

12 * N

on ISO V

G

DE

SCR

IPT

ION

Servomesh E

E oils are E

nergy Efficient industrial gear

oils, represent a new and significant advancem

ent ingear lubricant technology. It satisfies the new

era’sdem

ands –

“Energy

Savings” and

“Resource

Conservation” through reduction in frictional losses,

extension of gear life and prevention of irregular wear.

The

superior perform

ance of

these oils

has been

proven in field conditions especially in heavily loadedindustrial gear system

s. The oils dem

onstrate improved

thermal

stability and

oxidation resistance

over the

conventional Sulphur-Phosphorus

(S-P) gear

oils.T

hese oils possess good demulsibility, low

foaming

tendency and

provide excellent

rust and

corrosionprotection to m

etalsurfaces.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S

Servomesh

EE

gear

oils m

eet the

following

specifications:

-U

S STE

EL

224-

DIN

51517 PAR

T 3

-D

RA

VID

BR

OW

N SL

:53.101-

FOR

D M

OT

OR

CO

. M-2C

142C-

CIN

CIN

NA

TI M

ILA

CR

ON

P-59-

IPSS-1-09-003-

AG

MA

250.04-

IS: 8406 : 1993

AP

PL

ICA

TIO

NServom

esh E

E

gear oils

provide significant

energysavings in industrial gear system

s when com

pared toconventional S-P gear oils. Servom

esh EE

gear oilsm

eet the most stringent requirem

ents of the modern

gear lubricant. These oils are recom

mended for all

types of enclosed gear drives, heavily loaded bearingsand

industrial gears

running at

high speeds,

highpressures and under im

pact loads with circulation or

splash lubrication systems.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

-Im

prove gear efficiency.-

Have outstanding load carrying ability.

-R

educe power consum

ption and provide energysavings.

-L

ower bulk oil tem

perature.-

Provide smooth running through reduced vibration

and noise.-

Minim

ise formation of sludge and deposits even at

high temperatures.

-Protect com

ponents against rust and corrosion.

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

CYL CIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

OC

YL

C 460/530/680/800

CH

AR

AC

TE

RIST

ICS

ISO V

G460

530 *680

800K

inematic V


450-500520-560

640-680780-820

Viscosity Index, M

in.90

9085

85Flash Point (C

OC

),°C

Min.

280280

280280

Pour Point, °C M

ax6

66

6C

CR

, % w

t., Max

2.53.5

3.53.5

* Non ISO

VG

DE

SCR

IPT

ION

Servocyl C oils are highly refined steam

cylinderlubricating

oils, com

pounded w

ith specially

selected m

aterials, w

hich can

withstand

hightem

peratures,T

hese oils

have excellent

oiliness, good

filmstrength characteristics and resist w

ater wash out.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S

Servocyl C 460 &

800 meet end-use requirem

entsof IS: 1589-1966 G

rade 1 Type 2 and G

rade 2T

ype 2 respectively.

Servocyl C

oils

are approved

by the

leadingm

achinery manufacturers, such as:

•B

harat Heavy E

lectricals Ltd., T

richy•

Bharat

Pumps

and C

ompressors

Ltd.,

Naini

AP

PL

ICA

TIO

NServocyl

C

oils are

recomm

ended for

steamcylinder

lubrication under

wet

saturated steam

conditions.T

hese oils are not suitable for such applicationsw

here the steam condensate is re-used by m

ixingw

ith boiler

feed w

ater. T

hese oils

are also

recomm

ended for

lubrication of

worm

gears.

Other m

ajor uses include lubrication of paper andtextile m

ill calendar bearings and sugar mill roller

bearings.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Servocyl C oils

•E

nable higher loading of equipment, due

to its high-load carrying ability•

Reduce w

ear of cylinder walls and piston

rings•

Provide Protection

against rust

andcorrosion

•R

esist scouring action of steam•

Minim

ise tendency of deposit formation at

elevated temperatures

•R

esist severe

water

washing,

due to

excellent adhesive property

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

CYL MIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

OC

YL

M 680/1000/1500

CH

AR

AC

TE

RIST

ICS

ISO V

G680

10001500

Kinem


40°C640-680

980-10501450-1550

Viscosity Index, M

in.85

8080

Flash Point (CO

C), °C

Min.

280280

280Pour Point, °C

Max.

66

6C

CR

, % W

t., Max.

3.53.5

4.5

DE

SCR

IPT

ION

Servocyl M oils are highly refined steam

cylinderlubricants having excellent therm

al and chemical

stability. These oils provide good resistance to the

washing

effect of

moisture

and separate

easilyfrom

exhaust steam and condensate.

Servocyl M oils are non-additive treated m

inera loils, blended from

high quality, specially refined,high viscosity index base stocks.

PE

RF

OR

MA

NC

E ST

AN

DA

RD

S

Servocyl M

1000

meets

the follow

ingspecification :•

IS : 1589-1960 with am

endment N

o. 1 of1966 for C

ylinder Oil G

rade 2, Type 1

with

minor

deviation in

flash point

requirement

AP

PL

ICA

TIO

N

Servocyl M oils are recom

mended for cylinder

lubrication of steam engines handling superheated

steam.

T

hese oils

arespecially

suitable for

services demanding straight m

ineral oil where –in

ready separation of condensate from lubricant is

necessary so that the condensate can be furtherused in certain process w

ork.T

hese oils are not recomm

ended for wet steam

conditions.P

ER

FO

RM

AN

CE

BE

NE

FIT

SServocyl M

oils•

Enable higher loading of equipm

ent, sincethey have high-load carrying ability

•M

inimise w

ear of cylinder wall and poston

rings•

Protect engine

parts against

rusting and

corrosion•

Reduce

steam

consumption,

due to

excellent sealing

characteristics and

lowfrictional losses

•M

inimise tendency of deposit form

ation atelevated tem

peratures

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

SMIn

dian

Oil

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E - SE

RV

O SM

85, 175, 260

CH

AR

AC

TE

RIST

ICS

GR

AD

E85

175260

Kinem


100°C38-45

78-88120-130

Flash Point (CO

C), °C

Min.

230250

250Pour Point, °C

Max.

66

9C

opper strip corrosion, for 3 hrs., @ 100°C

11

1

DE

SCR

IPT

ION

Servo SM oils have been exclusively developed

from heavy bodied lube base stocks and contain

selected non toxic mild E

P additives to meet the

requirements of heavily loaded, slow

speed, mill-

roll bearings in sugar mills.

These

oils provide

excellent lubrication

andprevent w

ear and corrosion of bearings under alloperating conditions. B

eing viscous, they haveexcellent resistance to leakage and contain specialcom

pounding agents

to ensure

efficientlubrication

of m

achine elem

ents even

in the

presenceof

juice

MA

NU

FA

CT

UR

ER

S AP

PR

OV

AL

Servo SM oils are approved by the leading sugar

machinery m

anufactures, such as:

•B

ackau Wolf N

ew India

Engg. W

orks Ltd.,

Pune•

K. C

. P. Ltd ., M

adras

AP

PL

ICA

TIO

N

Servo SM

oils

are recom

mended

for the

lubrication of

sugar m

ill crusher

and m

ill-rollbearings.

T

hese oils

are generally

applied by

means of m

echanical force feed lubricators.In

certain industries,

these grades

are used

incentralised lubrication system

of slow speed spur

and helical gears and for slush pan lubrication ofopen gears.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

•Provide excellent protection against rust andcorrosion even in presence of ferm

ented sugarcane juice

•H

ave outstanding

lubricating properties

thereby permitting increased hydraulic loading

of top-roll

thus im

proving extractio n

efficiency•

Ensure m

inimum

oil consumption

•W

ithstand severe washing action, due to good

adhesive properties•

Provide tenacious film that clings on to the

bearing surfaces even under severe operatingconditions. T

his permits the bearing to run at

normal established o peration tem

perature.

SE

RV

O

PR

OD

UC

T DA

TA SH

EET

SERVO

COAT

Ind

ianO

il

HE

AL

TH

& SA

FE

TY




aintained.


R:


ept., Indian Oil C

orporation Ltd., G

-9, Ali Y

avar Jung Marg,B

andra (East), M

umbai – 400 051

E-M


Rtech_services@

indianoil.co.in

GR

AD

ES A

VA

ILA

BL

E – SE

RV

OC

OA

T 110, 120, 140, 170T

, 190

CH

AR

AC

TE

RIST

ICS

GR

AD

E110

120140

170T*

190K

inematic V


80-120220 – 250

400 – 550710 – 760

900 - 1100Flash Point (C

OC

), °C M

in.250

250280

280280

Copper strip corrosion, 100°C

, 3 hrs Max

11

11

1T

imken O

K load, K

g, Min

1515

1515

15* A

lso contains special tackiness agent

DE

SCR

IPT

ION

Servocoat compounds are heavy bodied, adhesive

type black lubricants for open gears, wire rope and

chain lubrication.

These

gear com

pounds are

formulated

usinghighly refined steam

cylinder oils having excellenttherm

al and

chemical

stability.

They

containspecially selected bitum

inous component, w

hic hprovides

excellent adhesiveness.

High

loadcarrying

characteristics are

imparted

to the

productbya

mild

EP

additive.

MA

NU

FA

CT

UR

ER

S AP

PR

OV

AL

AC

C – V

ickers Babcock L

td., ShahabadB

raithwaite &

Co (India) ltd., C

alcuttaB

ackau Wolf N

ew India E

ngg. Works, Pune

EIM

CO

– KC

P Ltd., M

adras

AP

PL

ICA

TIO

NServocoat com

pounds are primarily designed for

the lubrication of a wide variety of open gears

ranging from

m

achine tools/sm

all presses

toheavily

loaded open

gears in

cement

factories,coal m

ines, etc. These grades are also suitable for

lubrication of

kiln tyres,

operating at

hightem

peratures, in cement m

ills and chemical plants.

Open

gears have

been found

to be

sparselylubricated at irregular intervals. In such situationsa m

icroscopic film of lubricant should be able to

withstand

the load

and prevent

metal-to-m

etalcontact.

Servocoat com

pounds form

highly

tenacious film on m

etals and thus give excellentperform

ance under severe operating conditions.Servocoat

compounds

are also

suitable for

lubrication of wire ropes and chains. T

his productshould not be used in food processing industries.

PE

RF

OR

MA

NC

E B

EN

EF

ITS

Ensure excellent protection of gear teeth under

boundary lubrication conditions.H

ave excellent

film

adhesiveness thus

minim

ise lubricant throw off.

Provide long

lasting lubricating

film,

which

takes care

of irregular

application in

small

quantity, thus reducing lubrication cost.Protect

components

against rusting

evenduring idle periods.H

ave good resistance against water w

ashing.

Documents

SERVO Industrial Grades