NEW
/ Features: 3 0.1 0.01mm OEM/ODM
All series use 3 pieces Hirth Coupling & Hydraulic Clamp/
Unclamp System suitable for heavy cutting with long term
operation.
Driving source per Mitsubishi servo motor/drive to Rotate Tool
Disc. index time per station only need 0.1 Sec. position accuracy
:0.01mm.
Accepted OEM/ODM orders.
Servo Turret
Model CLT-80SB CLT-100SB CLT-125SB CLT-160SA CLT-200SB
Allowed number of tools N 8 12 8 12 8 12 8 12 8 12
Center height mm 80 100 125 160 200
Tool disc size mm 290 340 330 420 420 420 480 480 483 600
Clamping force kgf 2646 3842 5724 8790 13900
Rotation and clamping Sec. 0.57 0.54 0.78 0.72 0.76 0.7 0.97 0.9
1.31 1.23
Total indexing time for 180° (include clamping)
Sec. 0.87 1.34 1.32 1.6 1.98
Hydrulic working pressure kgf/m2 35 35 35 35 35
Flow rate L/min 20 20 30 30 30
Indexing accuracy Sec. ±2" ±2" ±2" ±2" ±2" ±2" ±2" ±2" ±2"
±2"
Accuracy of repeatability Sec. ±1" ±1" ±1" ±1" ±1" ±1" ±1" ±1" ±1"
±1"
Servo motor model
Gear ratio for rotating 24:1 45:1 45:1 45:1 24:1
Motor stalling torque Nm 2.4 4.8 4.8 4.8 8.1
/ Diameter of coupling type mm Ø125 / 3pcs Ø150 / 3pcs Ø180 / 3pcs
Ø230 / 3pcs Ø270 / 3pcs
GSA remains the right of modification. All specifications can be
modified according to customers' requirement.
/ Specification
Servo Turret
/ Dimension
140140
MITSUBISHI HG-SR102JK
16 0
35 3
CLT-80SB-8T
CLT-125SB-8T
CLT-200SB-8T
CLT-100SB-8T
CLT-160SA-8T
42052 66 67 81 GSA TECHNOLOGY CO., LTD. No. 81, Alley 67,Lane 66,
Feng-Nan St., Feng-Yuan, Taichung, TAIWAN TEL:+886-4-25377888
FAX:+886-4-25368899 E-MAIL:
[email protected]
http://www.gsaplus.com.tw
NEW
/ Features: R.P.M. 5000/6000 DIN1809 0.1 ( ) +-2 +-1 VDI BMT 0.01
mm( ) 0.005mm 1
Maximum speed of the power tooling can be reached 5,000/6,000 rpm
with strong clamping force which is suitable for heavy cutting such
as milling,drilling and tapping machining.
Adopting interface coupling of power tool holder with DIN 1809
type. Adopting 3pcs Hirth Coupling & Hydraulic Clamping
/Unclamping System suitable for heavy
cutting long term operation. There is need 0.1 sec. only with
speedy rotation time(adjacent),Indexing accuracy:+-2 sec.
Accuracy of repeatability:+-1 sec. Spindle Motor can be changed
according to different controller model such as SIEMENS and
MITSUBISHI. Adopting tool disc model of VDI or BMT type, position
accuracy can be reached
0.01mm(without tool holder),concentricity can be reached 0.005mm.
Changing time between in rotating position and power tooling within
one second. Low noise and high durability.
Power Tooling Turret
Model CLT-80SPB CLT-100SPB CLT-125SPB CLT-160SPB CLT-200SPB
Allowed number of tools N 12 12 12 12 12
Center height mm 80 100 125 160 200
Tool disc size mm 310 350 350 350 380 430 520 520
Clamping force kgf 2646 3842 5724 8790 13900
Rotation and clamping Sec. 0.54 0.72 0.7 0.9 1.23
Total indexing time for 180° (include clamping)
Sec. 0.87 1.34 1.32 1.6 1.98
Hydrulic working pressure kgf/m2 35 35 35 35 35
Flow rate L/min 20 20 30 30 30
Servo motor model
Gear ratio for rotating 24:1 45:1 45:1 45:1 24:1
Motor stalling torque Nm 2.4 4.8 4.8 4.8 8.1
/ Diameter of coupling type mm Ø125 / 3pcs Ø150 / 3pcs Ø180 / 3pcs
Ø230 / 3pcs Ø270 / 3pcs
Spindle motor model
FANUC αiI6-10000
FANUC αiI15-7000
FANUC αiI15-7000
Tool holder shaft size BMT45 BMT55 BMT55 BMT55 BMT65 BMT75 BMT85
BMT85
Rotating tool holder coupling DIN 1809 DIN 1809 DIN 1809 DIN 1809
DIN 1809
Gear ratio for power tooling 1:1 1:1 1:1 1:1 1:1
Tool holder Max.speed rpm 5000 5000 5000 4000 3500 3500
GSA remains the right of modification. All specifications can be
modified according to customers' requirement.
/ Specification
74 TH3/8 Clamp
TH3/8 Unclamp
Clamp 74 TH3/8
465 335.5
CLT-80SPB-12T
CLT-125SPB-12T
CLT-200SPB-12T
CLT-100SPB-12T
CLT-160SPB-12T
