SESSIONS CERIE 2011 jan 09

1

CONFERENCE OPENING CEREMONY

Date: 11th

January 2011

8:00 AM ~9.00 AM Registration

9:00AM – 11:00 AM Inaugural Session

Venue: Mini Auditorium, SUST,

Chief Guest: Architect Yeafesh Osman

Hon’ble State Minister

Ministry of Science, Information & Communication Technology

Govt. of the Peoples’ Republic of Bangladesh

Plenary Speaker: Prof. Dr. A.M.M. Safiullah, Former Vice-Chancellor,

BUET, Dhaka

“Designing Engineering Education for the 21st Century”

Chairman: Prof. Dr. Md. Saleh Uddin, Hon’ble Vice-Chancellor, SUST,

Sylhet

Convener: Prof. Dr. Mohammad Iqbal, Dean, School of Applied Sciences &

Technology, SUST, Sylhet

11:00A – 11:30 AM TEA BREAK

2

TECHNICAL SESSIONS

DAY 1, 11/01/’11

CHEMICAL & PETROLIUM ENGINEERING SESSION

CHAIR: Prof. Dr. Md. Akhtarul Islam, Dept. of Chemical Engineering and Polymer Science, SUST, Sylhet- 3114,

Bangladesh

Session Time Title Venue

CH

EM

ICA

L &

PE

TR

OL

IUM

EN

GIN

EE

RIN

G

11:30-12:10

Small angle neutron scattering studies on SDS micelles, I. Kamal et al. INST,

AERE, Bangladesh. (CERIE-148)

AC

AD

EM

IC B

UIL

DIN

G -

“B

”, R

OO

M N

O.

- “1

11

”

12:10-12:40

Tailoring MgH2 with Mg-Nb-O Towards Hydrogen Storage, Dipartimento di

Chimica IFM, NIS Centre of Excellence, Università di Torino, Via Pietro Giuria 9,

10125, Torino, Italy. (CERIE-163)

12:40-1:10

Electro-catalytic reduction of NO2–: Platinum Modified Glassy Carbon Electrode,

M.A. Rashed et al. SUST, Sylhet, Bangladesh. (CERIE-101)

1:10-2:00

LUNCH BREAK

CHAIR: Dr. Rocksana Begum, Dept. of Chemistry, SUST, Sylhet- 3114, Bangladesh

2:00-2:20

A composite photo catalyst for methylene blue degradation under visible light

irradiation, M Afsar Uddin et al. SUST, Sylhet, Bangladesh. (CERIE-99)

2:20-2:40

Numerical investigation of particle properties on coal gasification under CO2

atmosphere, Md. Saiful Alam et al. SUST, Sylhet, Bangladesh. (CERIE-119)

2:40-3:00

Dissimilar behavior of Ag modified Pt and Pd cathodes on the reduction

mechanism of NO3– at H

+–conducting solid polymer electrolyte reactor, M.A.

Hasnat et al. SUST, Sylhet, Bangladesh. (CERIE-98)

3:00-3:20

The integration technologies of photovoltaic power to the utility grid-a review,

Nur Mohammad et al. Chittagong University of Engineering and Technology,

Chittagong- 4349, Bangladesh. (CERIE-96)

3:20-3:40

BREAK

3:40-4:00

Application of Nanotechnology for Development of High Efficient Solar-Cell,

T.H. Mahdi et al. BUET, Dhaka, Bangladesh (CERIE-159)

4:00-4:20

Energy dense Liquid through Pyrolysis of Biomass Solid Waste: Coconut shell,

M.R.I. Sarker et al. Rajshahi University of Engineering and Technology, Rajshahi-

6204, Bangladesh. (CERIE-181)

3

DAY 1, 11/01/11.

CIVIL ENGINEERING and ARCHITECTURE SESSION

Chair: Professor Dr. Mohammod Aktarul Islam Chowdhury, Department of Civil and Environmental Engineering,

SUST, Sylhet-3114, Bangladesh.


CIV

IL E

NG

INE

ER

ING

an

d A

RC

HIT

EC

TU

RE

11:30-11:50

Study on optimal building height for inserting seismic base isolator as favorable

option, A.B.M. Saiful Islam et al. University of Malaya. Malaysia. (CERIE -154)

AC

AD

EM

IC B

UIL

DIN

G “

C”

RO

OM

NO

. “1

17

”

11:50-12:10

Development of strength-duration relationship for mortar, H.M.A.Mahzuz et al.

SUST, Sylhet, Bangladesh. (CERIE -123)

12:10-12:30

Design recommendations for eliminating premature shear failure of flexurally

strengthened RC beams, M.A. Rahman et al. University of Malaya, Malaysia.

(CERIE -174)

12:30-12:50

Effect of fineness modulus of sand on concrete properties, Ishtiaque Ahmed Tuhin

et al. SUST, Sylhet, Bangladesh. (CERIE -189)

12:50-1:10

Human thermal comfort on the basis of air movement and ventilation: study of a

specific residence. Masud Rashid et al. Ahsanullah University of Science and

Technology, Dhaka, Bangladesh. (CERIE-289)

1:10-2:00

LUNCH BREAK

Chair: Professor Dr. Qazi Azizul Mowla, Department of Architecture, BUET, Dhaka,

Bangladesh.

2:00-2:20

Crisis in the Built Environment of Dhaka: An Overview,

Qazi Azizul Mowla, BUET, Dhaka, Bangladesh. (CERIE-89)

2:20-2:40

Climate change and Climate Refugee Nexus in Bangladesh context, Professor, Qazi

Azizul Mowla, Department of Architecture, BUET, Dhaka, Bangladesh et al.

(CERIE-88)

2:40-3:00

Informal sector water-utility management: potential urban-slum upgradation policies

in Bangladesh, Md. Mohataz Hossain et al. BUET, Dhaka, Bangladesh. (CERIE-

161)

3:00-3:20

Learning from Islamic Heritage: an Assessment of Climate Change Impacts on

Mughal buildings in Dhaka, Md Mohataz Hossain et al, BUET, Dhaka, Bangladesh.

(CERIE-162)

3:20-3:40

BREAK

3:40-4:00

Strengthening of square RC column using low-cost square ferrocement jacketing

technique, A. B. M. Amrul et al. HBRI, Bangladesh. (CERIE -182)

4:00-4:20

Integration of performance based modeling techniques with building design method

considering energy efficiency in Bangladesh. Dr. Md. Rabiul Alam et al. Chittagong

University of Engineering and Technology, Chittagong- 4349, Bangladesh. (CERIE-

262)

4:20-4:40

The three-step method of computer generated visualization in architecture practice

in Bangladesh, Masud Rashid, Ahsanullah University of Science and Technology,

Dhaka, Bangladesh. (CERIE -190)

4:40-5:00 An Observation on the Acoustical Environments of Auditoriums in Dhaka.

Matluba Khan, BUET, Dhaka, Bangladesh. (CERIE-141)

4

PROGRAM SCHEDULE- DAY 1; 11/01/’11.

MATERIALS, WATER RESOURCE & ENVIRONMENTAL ENGINEERING SESSION

CHAIR: Prof. Dr. Md. Jahir Bin Alam, Dept. of Civil and Environmental Engineering, SUST, Sylhet, Bangladesh.


MA

TE

RIA

LS

, W

AT

ER

RE

SO

UR

CE

& E

NV

IRO

NM

EN

TA

L E

NG

INE

ER

ING

11:30-11:50

ENVIRONMENTAL DEGRADATION DUE TO THE URBANIZATION OF DHAKA-

NARAYNGANJ -DEMRA (DND) PROJECT AREA, Provat K. Saha et al. BUET,

Dhaka, Bangladesh. (CERIE-109)

LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

) R

OO

M :

PG

D-1

11:50-12:10

Noise pollution in Dhaka city – its harmful effects and Preventive measures,

M.A.Hannan et al. Dhaka University of Engineering and Technology, Gazipur,

Bangladesh. (CERIE-93)

12:10-12:30

Use of bamboo in morter & concrete as a construction material

H.M.A.Mahzuz et al. SUST, Sylhet, Bangladesh. (CERIE -122)

12;30-12:50

Divination of earthquake time history for Dhaka region and appraisal with familiar

earthquake records. A.B.M. Saiful Islam et al. University of Malaya. Malaysia.

(CERIE -155)

12:50-1:10

Historical analysis and aridity index mapping for agricultural drought study in north

western region of Bangladesh,Umme Salma Rima et al. Ahsanullah University,

Dhaka, Bangladesh. (CERIE -134)

1:10-2:00

LUNCH BREAK

CHAIR: Dr. Tauhid–Ur- Rahman, Dept. of Civil and Environmental Engineering, SUST,

Sylhet, Bangladesh.

2:00-2:20

Feasibility study assessment of eco-toilet and its challenges in Sylhet city,

Abul Abrar Masrur et al. SUST, Sylhet, Bangladesh. (CERIE-135)

2:20-2:40

A GIS based study on urban rainwater harvesting option using roof catchment,

Shams Al-Amin et al. Ahsanullah University, Dhaka, Bangladesh. (CERIE-142)

2:40-3:00

Solid waste management system of Narayanganj city: an environmental study,

Asib Ahmed et al. Dhaka University. (CERIE-152)

3:00-3:20

Appraisal of research progress on flexural strengthening of RC continuous T beam

in the negative moment region by means of CFRP laminate,

M.Z. Jumaat et al. University of Malaya. Malaysia. (CERIE -164)

3:20-3:40

BREAK

3:40-4:00

Design Construction and Performance Study of a Cascade Type Real Impactor for

Atmospheric Particulate Pollutant Measurement, Md. Ashraful Islam et al. Khulna

University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-

180)

4:00-4:20

Modeling groundwater flow and advective transport of salinity in the unconfined

aquifer of southwest Bangladesh, Sajal K Adhikary et al. Khulna University of

Engineering and Technology, Khulna- 9203, Bangladesh.(CERIE-183)

4:20-4:40

Reservoir operation considering environmental flow requirements in the hari rod

river basin, Afghanistan, Sajal K Adhikary et al. Khulna University of Engineering

and Technology, Khulna- 9203, Bangladesh. (CERIE-184)

4:40-5:00 Impact of Seismic Load on Masonry Building and Strengthening Against Seismic

Loading, Mostafa Muhiuddin Ferdous et al. Khulna University. (CERIE-191)

5

DAY 1, 11/01/11.

COMPUTER SCIENCE & ENGINEERING SESSION

Chair: Prof. Dr. Muhammed Zafar Iqbal, Department of Computer Science and Engineering, SUST, Sylhet,

Bangladesh

Session Time Title location

CO

MP

UT

ER

SC

IEN

CE

& E

NG

INE

ER

ING

11:30-11:50

A new approach of e-banking through the use of Mobile, Post-office and VPN in the

perspective of Bangladesh, Anupam Kumar Bairagi et al. Khulna University.

Bangladesh.(CERIE-113)

AC

AD

EM

IC B

UIL

DIN

G “

A"

RO

OM

NO

. “

Min

i. A

ud

ito

riu

m”

11:50-12:10

CSP: easy and faster decimal logarithm computation,

Dr. Liakot Ali et al. BUET, Dhaka, Bangladesh. (CERIE-118)

12:10-12:30

New technique for high speed decimal logarithm computation of decimal floating-

point number, Dr. Liakot Ali et al. BUET, Dhaka, Bangladesh. (CERIE -129)

12:30-12:50

Development of a software for calculating the thermodynamic and transport

properties of lithium bromide aqueous solution, Md. Abdul Wakil et al. Khulna

University of Engineering & Technology, Khulna, Bangladesh. (CERIE -158)

12:50-1:10

Performance Evaluation of Kalman Filter in Accoustic Echo Cancellation. A. K. M.

Kamrul Islam, Department of Computer Science & Engineering, IUBAT, Dhaka

(CERIE-221)

1:10-2:00

LUNCH BREAK

Chair: Mr. Mohammed Alamgir, Assistant Professor, Department of Computer Science and

Engineering, SUST, Sylhet-3114, Bangladesh.

2:00-2:20

Analysis of four different programmable logic arrays using NAND and NOR based

architecture, Md. Tariq Hasan et al. Khulna University, Bangladesh. (CERIE -172)

2:20-2:40

Interface design of a clients-server distributed system,

Rosina Surovi Khan. Ahsanullah University of Science and Technology, Dhaka,

Bangladesh. (CERIE -177)

2:40-3:00

E-court in Bangladesh: an empirical approach, A. K. M. Kamrul Islam et al.

Jahangirnagar University, Bangladesh. (CERIE -193)

3:00-3:20

Enhanced Genetic Algorithm in Scheduling Problems,

Md. Eamin Rahman. SUST, Sylhet, Bangladesh. (CERIE-366)

3:20-3:40

BREAK

3:40-4:00

A Block Based Data Hiding Method in Images Using Pixel Value Differencing and

LSB Substitution Method, Monowar Hossain, Department of CSE,

Sylhet International University, Sylhet. (CERIE-370)

4:00-4:20

Image guided surgery (IGS) model for emergency surgical intervention (ESI),

Abdulfattah A. Aboaba et al. IIU, Malaysia. (CERIE-397)

4:20-4:40

Exploiting Online Social Networks for Balancing Traffic Loads,

Syed Rakib Rahman, SUST, Sylhet, Bangladesh. (CERIE-219)

6

PROGRAM SCHEDULE –DAY 1; 11/01/’11

ELECTRONICS and COMMUNNICATION ENGINEERING SESSION

CHAIR: Prof. Dr. M Habibul Ahsan, Dept. of Physics, SUST, Sylhet- 3114, Bangladesh


EL

EC

TR

ON

ICS

& C

OM

MU

NIC

AT

ION

EN

GIN

EE

RIN

G.

11:30-11:50

Optimized latency secured (LS) MAC protocol for large scale clustered sensor

networks, Monir Hossen et al. Khulna University of Engineering and Technology.

(CERIE-137)

AC

AD

EM

IC B

UIL

DIN

G-

“E”;

RO

OM

NO

. -“

12

3”

11:50-12:10

Measurement of circular shaped cables parameters using an image processing

technique, Abu Naim Rakib Ahmed et al. Khulna University of Engineering and

Technology. (CERIE-151)

12:10-12:30

Development of an embedded system for low power message display, S.M. Tofayel

Ahmad et al. Bangladesh University of Science and Technology, Bangladesh.

(CERIE-139)

12:30-12:50

Estimation of optimal time step and compare with the ode solver of MATLAB

package of RLC circuit using numerical methods, Sheikh Md. Rabiul Islam et al.

Khulna University of Engineering and Technology. (CERIE-80)

12:50-1:10

Estimation of Optimal Time Step and Order of Convergence of RL Circuit Model

using Numerical Methods, Sheikh Md. Rabiul Islam et al. Khulna University of

Engineering and Technology. (CERIE-81)

1:10-2:00

LUNCH BREAK

CHAIR: Professor Dr. Ahmad Kabir, Dept. of Statistics, SUST, Sylhet, Bangladesh.

2:00-2:20

A Feasibility Study on Performance of 3G Networks in Urban Areas of Bangladesh,

Mohammad Mirza Golam Rashed et al. Daffodil International University. (CERIE-

307)

2:20-2:40

Design and Development of an Image Processing Based Container Identification

System, M.F. Ismail et al. Bangladesh University of Science and Technology, Dhaka,


2:40-3:00

Bio-medical data acquisition and transmission using bluetooth technology for medical

application, A.K.M Fazlul Haque et al. Daffodil International University, Bangladesh.

(CERIE-402)

3:00-3:20

Image devoicing using block thresholding, Sheikh Md. Rabiul Islam et al. Khulna

University of Engineering and Technology. (CERIE-233)

3:20-3:40

BREAK

3:40-4:00

Multiscale lmmse- based image denoising with optimal wavelet selection, Sheikh

Md. Rabiul Islam et al. Khulna University of Engineering and Technology, Khulna


4:00-4:20

Magic in VLSI, Shuza Binzaid et al. University of Information Technology &

Sciences (UITS), Dhaka, Bangladesh. (CERIE-241)

4:20-4:40

Implementation and results of a microcontroller based duobinary encoder circuit for

communication system, R. R. Mahmud at et al. Ahsanullah University of Science

and Technology (AUST), Dhaka. (CERIE-248)

4:40-5:00 Data transmission capacity enhancement in coaxial cable communication system, Md.

Habibullah et al. Khulna University of Engineering and Technology, Khulna.

(CERIE-260)

7


ELECTRONICS and ELECTRICAL ENGINEERING SESSION

CHAIR: Prof. Dr. Susanto Kumar Das, Dept. of Physics, SUST, Sylhet, Bangladesh.


EL

EC

TR

ON

ICS

an

d

EL

EC

TR

ICA

L E

NG

INE

ER

ING

11:30-11:50

Designing birefringence of photonic crystal fibers for optical sensing application, M.

A. G. Khan et al. Rajshahi University of Engineering and Technology, Rajshahi,


AC

AD

EM

IC B

UIL

DIN

: “E

”. R

OO

M N

O.

- “

12

4”.

11:50-12:10

Impedance matched compact zigzag inverted-f antenna for wi-fi operation in a laptop,

Debabrata Kumar Karmokar et al. Khulna University of Engineering and


12:10-12:30

Fast inter mode decision algorithm for h.264/ AVC video standard,

Md. Salah Uddin Yusuf et al. Khulna University of Engineering and Technology.

(CERIE-324)

12:30-12:50

VCSEL for high speed optical interconnects, Tanjila Ahmed et al. Dhaka

International University, Dhaka. (CERIE-325)

12:50-1:10

A new open loop control strategy of BOOST INVERTERS for PHOTOVOLTAIC SYSTEMS,

Ripan Kumar Dhar et al. Ahsanullah University of Science & Technology, Dhaka,


1:10-2:00

LUNCH BREAK

CHAIR: Dr. Md. Shah Alam, Dept. of Physics, SUST, Sylhet, Bangladesh.

2:00-2:20

Transceiver circuits for pulse based ultra wideband,

Bobby Barua et al. Ahsanullah University of Science and Technology, Dhaka,


2:20-2:40

Analysis o f the radiation properties of half-wavelength j-pole antenna arrays, Md.

Imran Momtaz et al. BUET, Dhaka, Bangladesh . (CERIE-79)

2:40-3:00

Radiation from a large circular loop antenna for a series of Fourier harmonic current

distribution. Md. Abdul Matin et al. BUET, Dhaka, Bangladesh . (CERIE-85)

3:00-3:20

Observation of multi domain structures on (001) cub and mono domain structure on

(111) cub surface in 0.91Pb (Zn1/3Nb2/3) O3-0.09 PbTiO3 Single Crystal.

Md. M. Rahman et al. World University of Bangladesh, Dhaka, Bangladesh. (CERIE-

94)

3:20-3:40 BREAK

3:40-4:00

Design and fabrication of a digital power factor meter, Md Selim Hossain et al.

Rajshahi University of Engineering and Technology, Rajshahi. (CERIE-111)

4:00-4:20

An AES processor on a reconfigurable hardware, Ahmed et al. BUET, Dhaka,


4:20-4:40

Implementation of boost converter for low power application M.F.Rahman. et al.

Rajshahi University of Engineering and Technology. (CERIE-136)

4:40-5:00 Design & implementation of up-converter on FPGA hardware with OFDM

(transmitter & receiver) signal, A. S. M. Iftekhar Uddin et al. Sylhet International

University. (CERIE-144)

8


INFORMATION- TECHNOLOGY (IT) SESSION

CHAIR: Prof. Dr. Rahmat Ali, Dept. of Statistics, SUST, Sylhet, Bangladesh.


INF

OR

MA

TIO

N-

TE

CH

NO

LO

GY

11:30-11:50

An effective bayesian personalized e-mail spam filter using word tokenization

method, M. Z. Hoque et al. Pubali Bank Limited, Dhaka, Bangladesh. (CERIE-318)

AC

AD

EM

IC B

UIL

DIN

: “B

”. R

OO

M N

O.

- “

11

3”.

11:50-12:10

A tutorial on comparing optical packet switching and optical burst switching,

Sajjad Waheed et al. Mawlana Bhashani Science and Technology University, Gazipir,


12:10-12:30

Methodology for cost effective web testing for ecommerce web applications, Md.

Safaet Hossain, et al North South University, Bashundhara, Dhaka, Bangladesh.

(CERIE-420)

12:30-12:50

Development of a voice controlled robotic arm, H. Kabir et al. Chittagong University

of Engineering and Technology, Chittagong- 4349, Bangladesh. (CERIE-218)

12:50-1:10

Mathematical modeling of eye movement, M.S.R. Shoaib et al. University of

Information Technology and Sciences, Dhaka, Bangladesh. (CERIE-240)

1:10-2:00

LUNCH BREAK

CHAIR: Prof. Md. Ahmed Kabir Chowdhury, Dept. of Statistics, SUST, Sylhet, Bangladesh.

2:00-2:20 Mathematical modeling of blood flow, M.S.R. Shoaib et al. University of


2:20-2:40

Dispersion and dispersion slope compensation using linearly chirped apodized fiber

bragg grating, Sher Shermin Azmiri Khan et al. BUET, Dhaka, Bangladesh.

(CERIE-294)

2:40-3:00

Packing Non-Identical Circles in a minimized Circular Container by Modified

Monotonic Basin Hopping Heuristic Approach, A. R. M. Jalal Uddin Jamali et al.,

Dept. of Mathematics, Khulna University of Engineering & Technology, Khulna 9203,

Bangladesh and Dept. of Computer Science, University of Turin, Italy. (CERIE-145)

3:00-3:20

Cost benefit oriented analysis for designing optimum quality Assurance practices,

Md. Safaet Hossain, North South University, Dhaka, Bangladesh. (CERIE-422)

3:20-3:40 BREAK

3:40-4:00

Microwave analysis of a MEMS switch, Md. Asaduzzaman et al. University of


4:00-4:20

Introducing green ICT for digital Bangladesh, Shovan Roy et al. Metropolitan

University, Sylhet, Bangladesh. (CERIE-117)

4:20-4:40

A comparative performance Analysis of 3G and WiMax, Mohammad Mirza Golam

Rashed et al. Daffodil International University, Dhaka, Bangladesh. (CERIE-140)

4:40-5:00 Pattern optimization of a linear dipole antenna through improving directivity and

reducing side lobes, A. S. M. Iftekhar Uddin et al. Sylhet International University,

Sylhet, Bangladesh. (CERIE-143)

9

DAY 1, 11/01/’11.

MECHANICAL & INDUSTRIAL ENGINEERING SESSION

CHAIR: Engr. A B M Abdul Malek, Department of Industrial & Production Engineering SUST, Sylhet- 3114,

Bangladesh


ME

CH

AN

ICA

L a

nd

IN

DU

ST

RIA

L E

NG

INE

ER

ING

11:30-11:50

Effect of micron size particle content on tribological behaviors of polymer matrix

composites, BUET, Dhaka. (CERIE-438)

LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

) R

OO

M :

PG

D-2

11:50-12:10

Effect of EGR ratio to control particulate matter emission from diesel engine

combustion by using High –Speed combustion model, A.S.M Sayem. et al.

Chittagong University of Engineering and Technology, Chittagong- 4349,


12:10-12:30

Optimization of supply chain inventory from customer service level perspective,

A.B.M. Abdul Malek. et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-331)

12:30-12:50

Evaluation of an assembly line for higher productivity -an lp modeling approach,

M. A. Hannan. et al. Dhaka University of Engineering and Technology, Gazipur.

(CERIE-364)

12:50-1:10

Evaluation of process capability of an apparel industry using fuzzy inference system,

Md Ahasan Habib. et al. Khulna University of Engineering and Technology, Khulna-


1:10-2:00

LUNCH BREAK

2:00-2:20 An improved approach to the solution of forward kinematic problems for head

restrain, Md. Fuhad Hassan. et al. Kongju National University. (CERIE-399)

2:20-2:40

Improvement through cellular manufacturing in RMG, Engr. A.B.M. Abdul Malek

et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-426)

2:40-3:00

Improvement of customer perceived quality of synthetic fiber using FUZZY QFD,

Golam Kabir. et al. BUET, Dhaka, Bangladesh. (CERIE-214)

3:00-3:20

Managing safety stocks in a way to profit maximization for the successful application

of inventory management, Khandaker Dahirul Islam. et al. BUET, Dhaka,


3:20-3:40 BREAK

3:40-4:00

Deicing technology for modern military and commercial aircraft wing surfaces,

Shuza Binzaid. et al. SERES. (CERIE-201)

4:00-4:20

The effects of collaborative supply chain, Md. Ahasan Habib. et al. Khulna

University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-225)

4:20-4:40

Effect of welding parameters on weld metal microstructur, Md. Abdul Hasib. et al.

Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.

(CERIE-228)

10

DAY 1, 11/01/’11.

SCIENCE & ENGINEERING SESSION

Chair: Professor Dr. Md. Kabir Hossain, Vice-Chancellor, Leading University, Sylhet, Bangladesh.


SC

IEN

CE

& E

NG

INE

ER

ING

11:30-11:50

Application of analytic hierarchy process (ahp) in identification of productive

investment sector: a case study in Sylhet of Bangladesh.

M. Z. Hossain et al. SUST, Sylhet, Bangladesh. (CERIE-385)

AC

AD

EM

IC B

UIL

DIN

G “

E” R

OO

M N

O.

“32

5”

11:50-12:10

Population Based Heuristic Approach for Packing Identical Circles in a Minimized

Circular Container. A. R. M. Jalal Uddin Jamali et al, Khulna University of

Engineering & Technology, Khulna, Bangladesh. (CERIE-95)

12:10-12:30

An exploratory study of Vision 2021: Status and Challenges.

Ahsan Habib et al, Metropolitan University, Sylhet. (CERIE -115)

12:30-12:50

Human resources management in garment industries-a database system.

Abul Mukid Mohammad Mukaddes et al, SUST, Sylhet, Bangladesh. (CERIE-127)

12:50-1:10

Development of a Systematic Plan of Action for Quality Improvement in Educational

Institutions: A Total Quality Management (TQM) Approach, Khandaker Dahirul

Islam BUET, Dhaka-1000. (CERIE-354)

1:10-2:00

LUNCH BREAK

Chair: Dr. Md. Mahbubur Rahman, Department of GEB, SUST, Sylhet-3114, Bangladesh.

2:00-2:20 Parallel Computing Using Remote Method Invocation.

Nazmin Akter et al, Metropolitan University, Sylhet, Bangladesh. (CERIE-147)

2:20-2:40

Importance of Physics Education for the Undergraduate Medical Students of

Bangladesh, Dr. Ramit Azad, Department of Operations Management American

International University-Bangladesh, Dhaka, Bangladesh . (CERIE-441)

2:40-3:00

ECG data compression by time based analysis using the correlation between the ECG

signals, Md. Iftekhar Hossain et al, BUET, Dhaka, Bangladesh. (CERIE-126)

3:00-3:20

Design And Development of PC Based Data Acquisition System For Monitoring

Environmental Parameters Using Labview, Md. Abdullah Al Mamun and Anisa

Begum, Atomic Energy Centre, 4 Kazi Nazrul Islam Avenue, Dhaka-1000. (CERIE-

442)

3:20-3:40 BREAK

Chair: Dr. Md. Abul Kalam Azad, Department of GEB, SUST, Sylhet-3114, Bangladesh.

3:40-4:00

Importance of admission test beside academic qualification for selecting students in

public universities of Bangladesh - a case study of SUST, Mohammad Romel Bhuia

et al. SUST, Sylhet, Bangladesh. (CERIE-220)

4:00-4:20

The orientation of Dauki Fault: an approximation using the 2D finite element

modeling, Md. Shofiqul Islam et al, SUST, Sylhet, Bangladesh. (CERIE-90)

4:20-4:40

Identifying risk factors of malnutrition for under five Bangladeshi children:

Application of ordinal logistic regression analysis. S. Das et al. SUST, Sylhet,


4:40-5:00 Towards creating a technology-enhanced language classroom: some pedagogic

consideration from the perspective of Bangladesh. Mizanur Rahman Jewel et al.

(CERIE-417)

5:00-5:20 Pubertal timing in internationally adopted children: Relation to early life condition

and birth weight, G.M. Rabiul Islam, Department of Food Engineering and Tea

Technology, SUST, Sylhet-3114. (CERIE-407)

11

DAY 1, 11/01/’11.

TELECOMMUNICATION & ENGINEERING SESSION

Chair: Engr. Syed Faruque Ahammed, Head, Department of Computer Science and Engineering,

Sylhet Engineering College, Bangladesh.


TE

LE

CO

MM

UN

ICA

TIO

N &

EN

GIN

EE

RIN

G

11:30-11:50

Interference reduction AND capacity enhancement using smart antennas in CDMA

networks, Ummee Tania Ahmed et al. The University of Asia Pacific, Dhaka,


AC

AD

EM

IC B

UIL

DIN

G “

E”,

RO

OM

NO

. “3

26

”

11:50-12:10

Channel estimation scheme FOR wireless communication systems, Md. Masud Rana,

Khulna University of Engineering & Technology, Khulna, Bangladesh. (CERIE -104)

12:10-12:30

Performance of MIMO-OFDM over flat fading channel using convolution coding,S.

R. Sabuj et al, BUET, Dhaka, Bangladesh. (CERIE -153)

12:30-12:50

Free-space optical communication system under strong turbulence with q-ary pulse-

position modulation, Bobby Barua et al. Ahsanullah university of science and

technology, Dhaka, Bangladesh. (CERIE -120)

12:50-1:10

Energy-efficiency, security and future of the wireless sensor networks, Sajjad

Waheed, Mawlaana Bhashani Science and Technology University, Tangail,


1:10-2:00

LUNCH BREAK

Chair: Prof. Dr. Md. Rashed Talukder, Department of Mathematics, SUST, Sylhet-3114,

Bangladesh.

2:00-2:20 The infrastructural advancement of e-learning in Bangladesh: A case study of present

status and future expectations, Atikur Rahman Baizid et al. Leading University.

(CERIE -108)

2:20-2:40

Performance analysis of WiFi network for indoor environment ,Mohammad Mirza

Golam Rashed et al. Daffodil International University, Bangladesh. (CERIE -112)

2:40-3:00

Performance analysis of convolutional coding for different channel conditions in

WCDMA, Md.Reaz Ashraful Abedin et al. Khulna University, Bangladesh. (CERIE -

116)

3:00-3:20

Performance Analysis of LDPC Codes for MIMO Wireless Communication Systems,

Md. Masud Rana Khulna University of Engineering & Technology, Khulna,


3:20-3:40 BREAK

3:40-4:00

Performance analysis of is estimated OFDM system over rayleigh fading channel,

Md. Noor -A- Rahim et al. Khulna University of Engineering & Technology, Khulna,


4:00-4:20

Wi-Fi protected access (WPA) –PSK (Phase Shift Keying) key cracking using

AIRCRACK-NG, Sheikh Md. Rabiul Islam, Khulna University of Engineering &

Technology, Khulna, Bangladesh. (CERIE -84)

4:20-4:40

Intelligent Traffic Control by CCTV, IC16F877A Microcontroller and IR Road

Sensor, Md. Nur-Us-Safa et al. The University of Asia Pacific, Dhaka, Bangladesh.

(CERIE -87)

4:40-5:00 Low Complexity Uplink Channel Estimation for LTE Systems

Md. Masud Rana, Khulna University of Engineering & Technology, Khulna,


12

DAY 2, 12/01/’11

FOOD & TEA, CHEMICAL, PETROLIUM ENGINEERING SESSION

CHAIR: Dr. Mainuddin Ahmed, CSO, Bangladesh Tea Research Institute, Srimongal, Moulvibazar


CH

EM

ICA

L a

nd

PE

TR

OL

IUM

EN

GIN

EE

RIN

G

9:00-9:30 “Tea Industry of Bangladesh – Past Present and Future” Keynote Speaker: Dr. Mainuddin Ahmed, CSO, BTRI, Srimongol, Moulovibazar.

AC

AD

EM

IC B

UIL

DIN

G-

“B”,

Ro

om

No

.: “

11

1”.

9:30-9:50 Structural divergences make plant aquaporins multifunctional membrane channels, Dr.

Abul Kalam Azad, Dept. of Genetic Engineering and Biotechnology, SUST, Sylhet

3114, Bangladesh; Dept. of Life Science and Biotechnology, Shimane Univ, Shimane

690-8504, Japan. (CERIE-400)

9:50-10:10 Coal bed methane (cbm) project, how far to minimize the energy crisis of Bangladesh,

Tahmilur Rahman et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-199)

10:10-10:30 Influence of weather parameters on red spider mite- a major pest of tea in Bangladesh,

M. Ahmed et al. Entomology Division, Bangladesh Tea Research Institute, Srimongol,

Moulovibazar, Bangladesh. (CERIE-405)

10:30-10:50 CRISPR may give important information which can be beneficial in molecular biology

and biotechnology study, Rafiad Islam et al., University of Dhaka, Bangladesh.

(CERIE-322)

10:50-11:10 Economics of Bangladesh tea industry, Dr. J.K.Saha et al. Statistics and Economics

Division, BTRI, Srimangal, Moulovibazar. (CERIE-406)

11:10-11:30 BREAK

CHAIR: Prof. Dr. Syed Shamsul Alam, Dept. of Chemistry, SUST, Sylhet, Bangladesh.

11:30-11:50

Numerical simulation of Titas gas field as a dry gas reservoir,

Md. Talibun Noor Molla et al. SUST, Sylhet, Bangladesh. (CERIE-334)

11:50-12:10

Shale volume and porosity assessment of Titas gas field using wireline log data in

bengal basin, Mohammad Islam Miah et al. SUST, Sylhet, Bangladesh. (CERIE-336)

12:10-12:30

Engineering classification of Shari Ghat River bed sand and prospect of it’s utilization

in different construction sectors, A.S.M. Golam Hossain et al. SUST, Sylhet,


12:30-12:50

Comparable analysis of engineering properties between crushed hard rock dust of

Maddhyapara granite mine, Dinajpur and natural sand. Tareq-Uz-Zaman et al. SUST,


12:50-1:10

Prospect of utilization of crushed hard rock dust of Maddhyapara granite mine,

Dinajpur as partial as well as complete replacement material for sand in concrete,

Tareq-Uz-Zaman et al. SUST, Sylhet, Bangladesh. (CERIE-339)

1:10-2:00

LUNCH BREAK

13

DAY 2, 12/01/’11

FOOD & TEA, CHEMICAL, PETROLIUM ENGINEERING SESSION

CHAIR: Prof. Dr. Ijaz Hossain, Dept. of Chemical Engineering, BUET, Dhaka, Bangladesh.


CH

EM

ICA

L &

PE

TR

OL

IUM

EN

GIN

EE

RIN

G

2:00-2:30 "3R Options for Industry"

Keynote Speaker: Prof. Dr. Ijaz Hossain, Dept. of Chemical Engineering, BUET,

Dhaka, Bangladesh

AC

AD

EM

IC B

UIL

DIN

G –

“B”,

RO

OM

NO

.-“1

11

”. 2:30-2:50

Development of a CSTR for the treatment of industrial wastewater by adsorption,

coupling with coagulation, Mitun C. Bhoumick et al. SUST, Sylhet- 3114,

Bangladesh. (CERIE347)

2:50-3:10

Electricity generation by a membrane less microbial fuel cell during waste water

treatment , Tammin Haque et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-349)

3:10-3:30

Biogas from municipal solid waste, Salma A. Iqbal et al. SUST, Sylhet, Bangladesh.

(CERIE-350)

3:30-3:40 BREAK

3:40-4:00

Risk and hazard identification and assessment and safety management in petroleum

engineering fields in Bangladesh, Md. Tanbir Ahmed Choudhury et al. SUST, Sylhet,


4:00-4:20

A review of the numerical solutions of dimensionless radial flow diffusivity equation

using Laplace transforms Md. Alomgir Hossain et al. SUST, Sylhet, Bangladesh.

(CERIE-351)

4:20-4:40

The effect of percentage of hollow lumen on the mechanical properties of bangle white

grade b jute fiber, Aart Van Vuure et al. Katholieke Universiteit Leuven, Belgium.

(CERIE-374)

4:40-5:00

Reservoir fluid properties analysis of Titas gas field in Surma basin, Bangladesh.

Mohammad Islam Miah et al. SUST, Sylhet, Bangladesh. (CERIE-378)

PROGRAM SCHEDULE –DAY 2, 12/01/’11.

SCIENCE& ENGINEERING SESSION

Chair: Prof. Dr. Nazia Chowdhury, Dept of Physics, SUST, Sylhet-3114, Bangladesh


SC

IEN

CE

& E

NG

INE

ER

ING

9:00-9:30 Atmospheric Effects On Photovoltaics Of MEH-PPV, Prof. Nazia Chowdhury et al.,

SUST, Sylhet-3114, Bangladesh. (CERIE-429)

AC

AD

EM

IC B

UIL

DIN

G “

E” R

OO

M N

O.

“32

5”

9:30-9:50 Laser Action In Polyfluorene And Fluorene-Based Co-Polymers, Md. Amdadul Huq et

al. SUST, Sylhet-3114, Bangladesh, (CERIE-428)

9:50-10:10 Use of Waste Plastics With Bitumen For Road Construction, Hazzaz – Bin – Yousuf et

al. SUST, Sylhet, Bangladesh. (CERIE-430)

10:10-10:30 Tensile and electrical properties of wood saw dust reinforced polymer matrix

composites, M. Faruk Hossain et al. BUET, Dhaka, Bangladesh. (CERIE-288)

10:30-10:50 A Study of the Internal Defects Of Various Types Of Construction Materials By Using

Direct Film Neutron Radiography Technique, Sudipta Saha et al. , SUST, Sylhet,


10:50-11:10 BREAK

14

PROGRAM SCHEDULE –DAY 2, 12/01/’11.

SCIENCE& ENGINEERING SESSION

CHAIR: Dr. Md. Mozzammel Hoque, Food Engineering and Tea Technology, SUST, Sylhet-

3114, Bangladesh

11:10-11:30

Effect Of Micron Size Particle Content On Tribological Behaviours Of Polymer

Matrix Composites. (CERIE-438)

11:30-11:50

Performance of the Two Chamber Microbial Fuel Cell, M. R. Khan et al., SUST,

Sylhet 3114, Bangladesh. (CERIE-439)

11:50-12:10

Construction and Visualization of A Digital Factory Using 3d Modeling Software,

Abdul Awal Md. Saiful Islam et al., SUST, Sylhet-3114, Bangladesh, (CERIE-433)

12:10-12:30

Flexible Workstation Design For Flexible Office Work Using Ergonomics , M Iqbal et

al., SUST, Sylhet-3114, Bangladesh, (CERIE-431)

12:30-12:50

Studies on the properties of epoxy-based polymer modified mortar, Md. Mostafizur

Rahman et al. SUST, Sylhet, Bangladesh. (CERIE -114)

12:50-1:10

Efficient hydrogen peroxide decomposition on bimetallic Pt–Pd surfaces,

M.Maria Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-97)

1:10-2:00 LUNCH BREAK

Chair: Dr. Farhad Howladar, Department of Petroleum and Georesources Engineering, SUST,

Sylhet-3114, Bangladesh

2:00-2:20 Formation water resistivity prediction of titas gas field using self-potential log data,

Bangladesh, Mohammad Islam Miah, Department of Geology, Dhaka University,

Bangladesh. Department of Petroleum and Georesources Engineering, SUST, Sylhet-


2:20-2:40

Study of the Isotherm and Breakthrough Curve of Methylene Blue Adsorption on

Delonix Regia Leaves (Krishnachura Leaves), K. A. Chowdhury, Center for

Environmental Process Engineering, Department of Chemical Engineering & Polymer

Science, SUST, Sylhet-3114, Sylhet, Bangladesh. (CERIE-353)

2:40-3:00

Flowing gas material balance: a case study of titas gas field, Sonia Aziz Chowdhury et


3:00-3:20

Software based evaluation of Overall Line Effectiveness (OLE) of a Garments

Industry, Mamunur Rashid, IPE, SUST, (CERIE 443)

3:20-3:40 An Overview Of Geology, Hydrogeology, And Open Pit Mining Perspective of The

Phulbari Gondwana Coal Deposit, Nw Bangladesh, Dr. Md. Rafiqul Islam et al.,

Department of Petroleum & Georesources Engineering. (CERIE-440)

3:40-4:00 Fabrication and characterization of plasmonic nano material & its application in

biosensor development, Nuruddin Ahmed, Department of Chemistry, Carletion

University, Ottawa, Canada (CERIE-449)

15

DAY 2, 12/01/’11.


CHAIR: Prof. Dr. Mohammad Younus, Dept. of Chemistry, SUST, Sylhet- 3114, Bangladesh.


CH

EM

ICA

L &

PE

TR

OL

IUM

EN

GIN

EE

RIN

G

9:00-9:30 A multivariate analysis of biodiesel production from the lipid of wastewater sludge,

Muhammad N Siddiquee et al. The University of Western Ontario, 1151 Richmond

Street North, London, Ontario, Canada. (CERIE-415)

AC

AD

EM

IC B

UIL

DIN

G-

“B”,

RO

OM

NO

.: “

11

3”.

9:30-9:50 Rule of mixture for predicting the elastic modulus of polymer-fiber and polymer-fiber-

particle composites: a discussion, MA Islam et al. SUST, Sylhet, Bangladesh.

(CERIE-411)

9:50-10:10 Study on the effect of radiation on the chitosan film extracted from prawn shell, N.

Deb et al. M C College, National University, Sylhet-3100, Bangladesh. (CERIE-210)

10:10-10:30 Underground or open pit mining method – An unresolved debate delaying coal mining

in Bangladesh, Md. Alomgir Hossain et al. SUST, Sylhet, Bangladesh. (CERIE-227)

10:30-10:50 Structural analysis of Fenchugonj gas field, Pulok Kanti Deb et al. SUST, Sylhet,


11:10-11:30 BREAK

CHAIR: Prof. Dr. Mizanur Rahman, Dept. of Chemistry, SUST, Sylhet, Bangladesh.

11:30-11:50

Commonly used reserve estimation methodology for gas reservoirs, Mohammad Asad

Ibne Hossain et al. SUST, Sylhet, Bangladesh. (CERIE-299)

11:50-12:10

Development of acidic mesoporous heterogeneous catalyst for the biodiesel production

from the lipid of wastewater sludge, Muhammad N Siddiquee et al. The University of

Western Ontario 1151 Richmond Street North, London. (CERIE-215)

12:10-12:30

Modern Approach to Estimation of Gas Reserve with Dynamic Reservoir Simulation-

A Case Study of Narshingdi Gas Field, Farhana Akter et al. SUST, Sylhet,


12:30-12:50

Critical toxicity level of arsenic in akitakomachi rice grown in presence of citrate-fe3+

,

Molla Rahman Shaibur et al. Jessore Science & Technology University, Jessore 7407,


12:50-1:10

Interring temperatures dependent dielectric properties of polycrystalline CaZn

CuT;O, A. K. M. Akther Hossain et al. Chittagong University of Engineering and

Technology, Chittagong- 4349, Bangladesh. (CERIE-207)


16

DAY 2, 12/01/’11.


CHAIR: Dr. Syeda Sultana Razia, Dept. of Chemical Engineering, BUET, Bangladesh.

Session Time Title Location

CH

EM

ICA

L &

PE

TR

OL

IUM

EN

GIN

EE

RIN

G

2:00-2:20

Formation of 1,1,1 trifluoroethane (143a) in the Freon 22 Reactor, Syeda S. Razia et

al., BUET, Dhaka 1000, Bangladesh. (CERIE-444)

AC

AD

EM

IC B

UIL

DIN

G-

“B”,

RO

OM

NO

.: “

11

3”.

2:20-2:40 Selective oxidation of methane into formic acid by H2O2 through liquid- phase

oxidation, Abul Kalam et al. Jagannath University, Dhaka 1100, Bangladesh. (CERIE-

232)

2:40-3:00 Preparation of titanium dioxide (TiO2) nanoparticles by sol-gel method and study of

photo-catalytic degradation kinetics using different dyes, Sheikh Ariful Haque et al.

Department of Chemical Engineering and Polymer Science,

SUST, Sylhet 3114, Bangladesh. (CERIE-239)

3:00-3:20

Improving the strength behavior of adobes using natural fibers, Md. Zahidul Islam

Bhuiyan, University of Malaya, Kualalumpur. (CERIE-269)

3:20-3:40

BREAK

CHAIR: Dr. Md. Jasim Uddin, Dept of Chemical Engineering, SUST, Sylhet, Bangladesh.

3:40-4:00

Determination of Mass Transfer Coefficient: A Laboratory Demonstration, Formation

of 1,1,1 trifluoroethane (143a) in the Freon 22 Reactor , Syeda S. Razia et al., BUET,

Dhaka 1000, Bangladesh. (CERIE-436)

4:00-4:20

Pressure data analysis and reservoir parameter estimation of Kailsatilla gas field (well

no. ktl-01& ktl-02), Md. Mizanur Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-

273)

4:20-4:40 Genetic engineering: the novel approach to bring food security and to save our

environment from pollution, Shamsul H. Prodhan et al. SUST, Sylhet, Bangladesh.

(CERIE-280)

4:40-5:00

Evolution of reversed mesa ridge waveguide on ALGAAS/GAAS heterostructure

based laser material employing wet etchants, D. M. S. Sultanet al., Photonics

Laboratory, MC2, Chalmers University of Technology, SE 41296, and Gothenburg,

Sweden. (CERIE-277)

5:00-5:20

Modeling and analyzing pressure buildup data of Kailastilla gas field (well no. ktl-01&

ktl-02), Md. Mizanur Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-274)

17

DAY 2, 12/01/’11.

TELECOMMUNICATION & ENGINEERING SESSION

Chair: Prof. Dr. Md. Shajedul Karim, SUST, Sylhet-3114, Bangladesh.


TE

LE

CO

MM

UN

ICA

TIO

N &

EN

GIN

EE

RIN

G

9:00-9:30 Mobile radio communication with various digital modulation techniques. Md. S.

Rahman. et al. Rajshahi University of Engineering and Technology, Rajshahi- 6204,


AC

AD

EM

IC B

UIL

DIN

G “

E” R

OO

M N

O.

“32

6”

9:30-9:50 Multiband Strip Antenna for 2.3/2.5/5.5 GHz WiMAX and 2.4 GHz WLAN

Operations, Debabrata Kumar Karmokar et al. Khulna University of Engineering &

Technology, Khulna, Bangladesh. (CERIE-252)

9:50-10:10 Training Based Channel Estimation Scheme for LTE OFDMA Systems Using LMS

Algorithm, Md. Masud Rana, Khulna University of Engineering & Technology,

Khulna, Bangladesh. (CERIE -107)

10:10-10:30 Inquest of architecture for soa, Sajjad Waheed, Mawlaana Bhashani Science and

Technology University, Tangail, Bangladesh. (CERIE-377)

10:30-10:50 Design and simulation of four bands microstrip patch antenna array for multiband

applications. Md.Tanvir Ishtaique-ul Huque, Rajshahi University of Engineering &

Technology, Rajshahi, Bangladesh. (CERIE-231)

11:10-11:30 BREAK

DAY 2, 12/01/11.


Chair: Prof. Dr. Md. Aminul Islam, Dept. of Materials and Metallurgical Engineering, BUET, Dhaka, Bangladesh.


CIV

IL E

NG

INE

ER

ING

an

d A

RC

HIT

EC

TU

RE

9:00-9:30 Thermo mechanically treated advanced structural steels to improve the

earthquake resistance of buildings.

Keynote Speaker: Prof. Dr. Md. Aminul Islam, Dept. of Materials and Metallurgical

Engineering, BUET, Dhaka, Bangladesh.

AC

AD

EM

IC B

UIL

DIN

G “

C”

RO

OM

NO

. “1

17

”

9:30-9:50 Trend of urban heat island (UHI) in Sylhet city, Mohammod Aktarul Islam Chowdhury


9:50-10:10 A study on the noise pollution in vulnerable sites of Sylhet city. M.A.I. Chowdhury et


10:10-10:30 Effect of aggregate grading on concrete compressive strength. B. Haque et al. SUST,


10:30-10:50 Evaluation of structural condition and serviceability of a portion of damaged urban

road, Md. Imran Kabir et al. SUST, Sylhet, Bangladesh. (CERIE-357)

10:50-11:10 Rethinking the form of sustainable Cyclone Shelter. Dr. Md Rabiul Alam et al.

Chittagong University of Engineering & Technology, Chittagong, Bangladesh. (CERIE-

358)

11:10-11:30 BREAK

11:30-11:50 Effect of soft storey in reinforced concrete frame structure.

Kashif Mahmud , Islamic University of Technology, Bangladesh. (CERIE-359)

11:50-12:10

Appropriate technique for leachate treatment – a comparative study for Matuail landfill

site, Kashif Mahmud, Islamic University of Technology, Bangladesh. (CERIE-360)

12:10-12:30

A low cost temperature control unit for wastewater respirometer, Mohammad Shahidur

Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-208)

12:30-12:50 Impact and improvement of lateral load resistance using geo-textile.

Mohammad Nurul Islam, Rajshahi University of Engineering & Technology, Rajshahi,


12:30-12:50 A study on the luminous environment of primary schools in Bangladesh: a case in

Narsingdi. Matluba Khan, BUET, Dhaka, Bangladesh. (CERIE -146)

12:50-1:10 Eco‐housing: material technologies for a sustainable built environment, Mujtaba Ahsan

et al. BUET, Dhaka, Bangladesh. (CERIE -138)


18

DAY 2, 12/01/11.


Chair: Professor Dr. Mohammad Aktarul Islam Chowdhury, CEE, SUST, Sylhet, Bangladesh


CIV

IL E

NG

INE

ER

ING

an

d A

RC

HIT

EC

TU

RE

2:00-2:20

Chloride penetration resistances of fly ash cement mortar, Md. Moinul Islam at el.

Chittagong University of Engineering & Technology, Chittagong, Bangladesh.

(CERIE-373)

AC

AD

EM

IC B

UIL

DIN

G “

C”

RO

OM

NO

. “1

17

”

2:20-2:40

Optimum design of continuous prestress concrete I-girderbridge system, Shamim Kabir

Sarker et al. BUET, Dhaka, Bangladesh. (CERIE-375)

2:40-3:00

Urban heat island (UHI) drifts in Rajshahi city, Mohammod Aktarul Islam Chowdhury


3:00-3:20

Shear strength behavior of granular materials: effect of grain size, Mohammad Nurul

Islam et al. Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.

(CERIE-389)

3:20-3:40

BREAK

3:40-4:00

Sway of reinforced concrete (RC) frames, Monirul Islam et al BUET, Dhaka,


4:00-4:20

A Regional Assessment of Air Pollution by the Brickfields in Bangladesh,

Mohd. Abdus Sobhan et al. Rajshahi University of Engineering & Technology,

Rajshahi, Bangladesh. (CERIE-217)

4:20-4:40

Ultimate load capacity of axially loaded vertical piles in deposits of Bengal basin,

Ariful Hasnat, The University of Asia Pacific, Dhaka. Bangladesh. (CERIE-206)

DAY 2, 12/01/’11.

COMPUTER SCIENCE &ENGINEERING SESSION

Chair: Professor Dr. M. Gulam Ali Hayder, Department of Mathematics, SUST, Sylhet-3114, Bangladesh.


CO

MP

UT

ER

SC

IEN

CE

& E

NG

INE

ER

ING

9:00-9:30 Visual-miR: Visualization system of precursor microRNA, Md. Eamin Rahman et al.

SUST, Sylhet, Bangladesh. (CERIE-348)

AC

AD

EM

IC B

UIL

DIN

G “

A"

RO

OM

NO

. “

Min

i. A

ud

ito

riu

m”

9:30-9:50 Bit Error Rate for Different Modulation Techniques in OFDM,

Md. Zulfiker Mahmud, Green University of Bangladesh. (CERIE-223)

9:50-10:10 Modeling & performance analysis of photovoltaic modules, Moinuddin ahmad et al.


(CERIE-230)

10:10-10:30 An effort to improve software teaching in engineering education,

Zakia Sultana et al. UIU. Dhaka, Bangladesh. (CERIE-401)

10:30-10:50 A knowledge-based system for identifying safe road,

Shima Chakraborty. Dhaka International University, Bangladesh. (CERIE-311)

10:50-11:10 Study, analysis and design of a network intrusion detection system, Sonia Afrin, Dhaka

International University, Bangladesh. (CERIE-314)

11:10-11:30 BREAK

11:30-11:50 Generalization of deutsch-jozsa algorithm with the aid of grover operator, Ayesha

Tasnim et al. SUST, Sylhet, Bangladesh. (CERIE-316)

11:50-12:10

An Efficient Vertical Handoff Initiation Algorithm for Handoff Management in-

between WLAN and WCDMA, Khaled Mahbub Morshed, Department of Electronics &

Communication Engineering, Khulna University of Engineering & Technology,

Khulna- 9203, Bangladesh. (CERIE-327)

12:10-12:30

Development of a software tool for the optimization of GSM cellular system design and

planning. Hossain Md Shahriar Rumi, Dept. of Electrical and Electronic Engineering,

Ahsanullah University of Science and Technology, Dhaka. (CERIE-328)

19

DAY 2, 12/01/’11.


Chair: Professor Dr. Mohammad Iqbal, Head, Department of Industrial and Production Engineering, SUST, Sylhet-

3114, Bangladesh.


ME

CH

AN

ICA

L a

nd

IN

DU

ST

RIA

L E

NG

INE

ER

ING

9:00-9:30 A model on industrial information system (IIS), C. A. Anam Rashed et al. SUST,

Sylhet3114, Bangladesh. (CERIE-244)

LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

) R

OO

M :

PG

D-2

9:30-9:50 Managing safety stocks in a way to profit maximization for the successful application

of inventory management system in a multinational company.Khandaker Dahirul

Islam. et al. BUET, Dhaka, Bangladesh. (CERIE-169)

9:50-10:10 An experimental investigation on single axis sun tracker by wiper motor. Md. Riaz

Pervez. et al. Rajshahi University of Engineering and Technology, Rajshahi- 6204,


10:10-10:30 Job-shop scheduling using artificial neural network. Abdullah Al-Faruk. et al. Khulna

University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-245)

10:30-10:50 Trends of environment friendly product design in Bangladesh,

Md. Shahriar Jahan Hossain. et al. Rajshahi University of Engineering and

Technology, Rajshahi- 6204, Bangladesh. (CERIE-246)

10:50-11:10 Energy of a raindrop and scope of harvesting raindrop energy. Md. A. Uddin. et al.

BUET, Dhaka, Bangladesh. (CERIE-249)

11:10-11:30 BREAK

11:30-11:50

Experimental analysis on the heat transfer performance of an ammonia-charged

pulsating heat pipe, T.H. Mahdi. et al. BUET, Dhaka, Bangladesh. (CERIE-398)

11:50-12:10

Opportunities for six sigma in Bangladeshi industries. Kazi Arif-Uz-Zaman et al.


(CERIE-253)

12:10-12:30

Prospect of industrial engineering techniques and their applications. A.M.M. Nazmul

Ahsan. et al. Khulna University of Engineering and Technology, Khulna- 9203,


12:30-12:50

Bubble burst control using smart structure sensor actuators for stall

suppression.Mohammad Mashud. et al. Khulna University of Engineering and

Technology, Khulna- 9203, Bangladesh. (CERIE-167)

The effect of CNT waviness on tensile elastic modulus of carbon nanotube based

composites using finite element method.

Israt Jahan Chowdhury. et al. BUET, Dhaka, Bangladesh. (CERIE-282)

1:10-2:00

LUNCH BREAK

20

DAY 2, 12/01/’11.


Chair: Dr. Mosharaf Hossain, Head, Dept. of Industrial and Production Engineering, Rajshahi, University of

Engineering and Technology, Rajshahi- 6204, Bangladesh


ME

CH

AN

ICA

L a

nd

IN

DU

ST

RIA

L E

NG

INE

ER

ING

2:00-2:20 Production scheduling in a garments manufacturing company: a case study, Md.

Mohibul Islam. et al. Comfit Composite Knit Limited, Tangail, Bangladesh,

Department of Industrial & Production Engineering, Rajshahi University of

Engineering & Technology, Rajshahi-6204, Bangladesh. (CERIE-175)

LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

) R

OO

M :

PG

D-2

2:20-2:40

Ergonomics and the prevention of musculo-skeletal strain and back injuries,

Muhammad Abdus Samad. et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-103)

2:40-3:00

Redesigning cycle rickshaw wheel to minimize accidentprobability and severity,

Khairun Nahar. et al. Otobi Ltd, Gulshan 1, Dhaka 1212, Bangladesh and Department

of Industrial and Production Engineering, Rajshahi University of Engineering &

Technology, Rajshahi 6204, Bangladesh. (CERIE-176)

3:00-3:20

Airfoil stall suppression by use of a bubble burst control plate, Md. Shariful Islam. et

al. Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.

(CERIE-166)

3:20-3:40 BREAK

3:40-4:00

Application of lean manufacturing tools for performance analysis: a case study with a

focus on sewing section of a selected garments factory, Rubayet Karim. et al. Jessore

Science & Technology University. (CERIE-149)

4:00-4:20

Mathematical model for melting rate in electric arc welding using regression analysis,

A.K.M. Nazrul Islam. et al. BUET, Dhaka, Bangladesh. (CERIE-165)

4:20-4:40

Application of fixed time period model for optimizing inventory level: a case study in

a pharmaceutical company, Mohammed Mahfuz Hossain. et al. SUST, Sylhet- 3114,


4:40-5:00 Fabrication and performance test of a room air conditioning system with solar

collector a new approach, M. J. Jabbar. et al. BUET, Dhaka, Bangladesh. (CERIE-

102)

21



CHAIR: Prof. Dr. Shumsun Naher Bagum, Dept. of Physics, SUST, Sylhet, Bangladesh.


EL

EC

TR

ON

ICS

& C

OM

MU

NIC

AT

ION

EN

GIN

EE

RIN

G.

9:00-9:30 Designing of armature winding using programming technique instead of conventional

method, Abu Naim Rakib Ahmed et al. Khulna University of Engineering and

Technology, Khulna Bangladesh. (CERIE-267)

AC

AD

EM

IC B

UIL

DIN

G “

E".

R

oo

m N

o.

“12

3”.

9:30-9:50 VLSI Design of an ultra-low-power functional chip using mirror-amplifier for

precision sensor applications, Shuza Binzaid et al. University of Information

Technology & Sciences, Dhaka, Bangladesh. (CERIE-297)

9:50-10:10 Intersubband absorption characterization of GAN/ALN based multi quantum well

heterostructures grown on gan template by molecular beam epitaxy using FTIR

spectroscopy, Md. Arefin Taslim et al.Daffodil International University. (CERIE-278)

10:10-10:30 FOPA, the Ultimate Competent of Next Generation Optical Amplification, Md. Taslim

Arefin et al. Daffodil International University, Dhaka, Bangladesh. (CERIE-279)

10:30-10:50 PAPR Reduction Technique for 3GPP LTE OFDMA System,

D.M. Motiur Rahaman et al. Rajshahi University of Engineering and Technology.

(CERIE-281)

10.50-11.10 Experimental analysis on wireless energy transfer via strongly coupled magnetic

resonances, Shamendu Roy Rohi et al. American International University-Bangladesh.

(CERIE-292)

11:10-11:30

BREAK

11:30-11:50

Design of VLSI Pad frame towards low power i/o architecture with an efficient floor

planning, Rumana Amin et al. University of Information Technology & Sciences,


11:50-12:10

Bi-edf-based optical amplification and multiwavelength laser, Zinnat Ara Islam et al,

Department of Electrical Engineering, University of Malaya, Malaysia. (CERIE-197)

12:10-12:30

Unified power quality conditioner (upqc): development of hardware using facts

technology, P.K. Shadhu Khan et al. Chittagong University of Engineering and


12:30-12:50

Reduction of PAPR in OFDM Using SLM for Different Route Number, Md. Zulfiker

Mahmud, CSE, Green University of Bangladesh. (CERIE-320)

12:50-1:10

A Feasibility Study on Performance of 3G Networks in Urban Areas of Bangladesh,

Mohammad Mirza Golam Rashed, Department of Electronics and Telecommunication

Engineering, Daffodil International University, 102-Mirpur Road, Shukrabad Dhaka.

(CERIE-361)

1:10-2:00

LUNCH BREAK

22



CHAIR: Prof. Dr. Md. Sujaul Haque Chowdhury, Dept. of Physics, SUST, Sylhet- 3114,

Bangladesh

EL

EC

TR

ON

ICS

& C

OM

MU

NIC

AT

ION

EN

GIN

EE

RIN

G.

2:00-2:20 Prospect of grid connected solar PV power plant in Bangladesh,

Md.Walee Zaman et al. BUET, Dhaka, Bangladesh. (CERIE-270)

AC

AD

EM

IC B

UIL

DIN

G “

E".

R

oo

m N

o.

“12

3”.

2:20-2:40

A comparative study of electrical, hall effect and magnetic properties of co thin films

deposited on GaAs(001), Si(001) and glass substrates, N. A. Shafi et al. Sar securities

ltd, Motijheel, Dhaka. (CERIE-300)

2:40-3:00

Unified power quality conditioner (upqc): development of hardware using facts

technology, P.K. Shadhu Khan et al. Chittagong University of Engineering and


3:00-3:20

Design and implementation of a microcontroller based elevator control systems,

Muhibul Haque Bhuyan et al., Daffodil International University, Dhaka, Bangladesh.

(CERIE-293)

3:20-3:40 BREAK

3:40-4:00

Microcontroller based automatic liquid level control modeling,

Shakil Seeraji et al. Green University of Bangladesh, Dhaka. (CERIE-268)

4:00-4:20

Design and manufacturing of a low cost synchronous motor-generator for electrical

machine laboratory, Muhibul Haque Bhuyan et al. Daffodil international university,


4:20-4:40

Electrical, hall effect and optical properties of undoped cobalt thin films, N. A. Shafi et

al. Sar securities ltd, Motijheel, Dhaka. (CERIE-301)



CHAIR: Dr. Wasim Bari, Dept. of Computer Science and Engineering, Leading University, Sylhet


EL

EC

TR

ON

ICS

& C

OM

MU

NIC

AT

ION

EN

GIN

EE

RIN

G.

9:00-9:30 Modified intra_4x4 prediction scheme for h.264 video coding.

Md. Salauddin Yusuf, Department of EEE, Khulna University of Engineering &

Technology Khulna-9203, Bangladesh. (CERIE-419)

AC

AD

EM

IC B

UIL

DIN

G “

E"

Ro

om

No

. “1

23

”.

9:30-9:50 Design and Simulation of a Multi-Language Digital Clock by Switching System.

R. R. Mahmud. et al. Ahsanullah University of Science and Technology. (CERIE-196)

9:50-10:10 Linearization of voltage-controlled oscillator by microcontroller based PLL frequency

synthesizer. Md. Lutfor Rahman et al. Daffodil international university. (CERIE-

258) 10:10-

10:30

Design, Simulation and Performance Analysis of High Voltage Multistage Pulse

Forming Network. M. Shahed et al. Dept. of EEE, Ahsanullah University of Science

and Technology (AUST), Bangladesh. (CERIE-372)

10:30-

10:50

Design of alas/gaas/ge lattice matched multijunction solar cells.

Md. Jahirul Islam et al. Khulna University of Engineering and Technology. (CERIE-

365)

10:50-

11:10 BREAK

11:10-

11:30

Microcontroller based digital voltmeter design, Tahsin Fahima Orchi. et al. Ahsanullah

University of Science and Technology, Dhaka. (CERIE-171)

11:30-

11:50

Design and implementation of a remote sensing electricity supply control for industrial

applications, Muhibul Haque Bhuyan et al. Daffodil international university. (CERIE-

291)

11:50-

12:10

Structural properties and temperature dependence of resistivity of pure co material

deposited Co/Si(001) and co/glass thin films. N.A. Shafi et al. Sar securities ltd,

Motijheel, Dhaka. (CERIE-302)

12:10-

12:30

MobiLOAN: a mobile payment based microfinance technology to improve rural

microfinance service delivery and optimize the operational cost

Mohammad Sajidur Rahman et al. BUET, Dhaka, Bangladesh. (CERIE-321)

23



CHAIR: Prof. Dr. Abdul Hannan, Dept. Of Physics, SUST, Sylhet, Bangladesh.

Session Time Title VENUE

EL

EC

TR

ON

ICS

an

d

EL

EC

TR

ICA

L E

NG

INE

ER

ING

9:00-9:30 Red light violation monitoring and reporting using microcontroller controlled wireless

communication, Tanvir Hassan Bhuiyan et al. Chittagong University of Engineering

and Technology, Chittagong, Bangladesh. (CERIE-341)

AC

AD

EM

IC B

UIL

DIN

: “E

”.

RO

OM

NO

. -

“1

24

”.

9:30-9:50 Design and implementation of a microcontroller based liquid level control system, M.

S. Hossain, et al. Rajshahi University of Engineering and Technology. (CERIE-185)

9:50-10:10 PC Based Incubator for Hatching Eggs Using Fuzzy Logic Controller, M. S. U.

Zaman.et al. Rajshahi University of Engineering and Technology. (CERIE-187)

10:10-

10:30

Smart room control unit using standard rc5 remote code,

Md. Ismail Hossain. et al.. International Islamic University, Gazipur, Bangladesh.

(CERIE-188)

10:30-

10:50

Solar Concentrator Technology for rural Bangladesh, Kazi Wohiduzzaman, et al.

Metropolitan University, Sylhet, Bangladesh. (CERIE-194)

10:50-

11:10

A CMOS IC Using Nano-Power Electronic Circuits for Life-Saving Applications in

Bangladesh, Shuza Binzaid et al. University of Information Technology and Sciences,

Dhaka, Bangladesh. (CERIE-195) 11:10-11:30 BREAK

11:30-

11:50

Simulation of pulse forming system, Sajal Kumar Das et al. Rajshahi University of


11:50-

12:10

Implementation of artificial intelligence in embedded System for automatic voltage

regulato, Shakil Ahamed Khan et al. Dhaka International University. (CERIE-121)

12:10-

12:30

Steady state analysis of a CSI-FED induction motor, drive with field orientation

control, Md. Jahirul Islam et al. Khulna University of Engineering and Technology.

(CERIE-150)

12:30-

12:50

A recurrent neural network based back EMF estimator for position sensorless control

of IPM synchronous motor drive, Kalyan Kumar Halder et al. Khulna University of


12:50-1:10

Recurrent neural network based cost effective four switch three phase inverter fed

synchronous reluctance motor drive, Kalyan Kumar Halder.et al. Khulna University of



Chair: Engr. Syed Faruque Ahammed, Principal, Sylhet Engineering College, Sylhet


EL

EC

TR

ON

ICS

an

d

EL

EC

TR

ICA

L E

NG

INE

ER

ING

2:00-2:20 PAPR Reduction Technique for 3GPP LTE OFDMA System, D.M. Motiur Rahaman,

Rajshahi University of Engineering & Technology, Bangladesh. (CERIE-281) A

CA

DE

MIC

BU

ILD

IN:

“E”.

RO

OM

NO

. -

“1

24

”.

2:20-2:40 A new method of medical image enhancement based on nonsubsampled contourlet

transforms, Md. Foisal Hossain. et al. Osaka Prefecture University, Japan. (CERIE-

173)

2:40-3:00 20 kW Grid connected solar power station: monitoring and assessment, Md. Abu

Ruhul Kuddus et al. BUET, Dhaka, Bangladesh. (CERIE-179)

3:00-3:20 Smart room: an intelligent and energy conserving living Environment,

Md. Emran Chowdhury. et al. Northern University, Bangladesh. (CERIE-192)

3:20-3:40 BREAK

3:40-4:00 Charge control studies in INXGA1-XN/INN/ INXGA1-XN-BASED double channel

high electron mobility transistors (DHEMTS), Md. Rejvi kaysir et al. Khulna

University of Engineering and Technology, Khulna, Bangladesh. (CERIE-379)

4:00-4:20

Growth and characterization of MOVPE INXGA1-XN (X ~ 0.4) , Md Rafiqul islam1

et al. Khulna University of Engineering and Technology, Khulna, Bangladesh.

(CERIE-380)

4:20-4:40

Design and implementation of a plc based screw air compressor for industrial

applications, Poresh kanti das et al. Daffodil international university. (CERIE-383)

4:20-4:40

Implementation of PID control and PWM technique in embedded system for ripple

free and stabilized Sine wave inverter, Md. Ismail Hossain et al. International Islamic

University Chittagong. (CERIE-224)

24



CHAIR: Dr. G. M. Jahid Hasan, Dept. of Civil and Environmental Engineering, SUST, Sylhet, Bangladesh.


MA

TE

RIA

LS

, W

AT

ER

RE

SO

UR

CE

an

d E

NV

IRO

NM

EN

TA

L E

NG

INE

ER

ING

9:00-9:30 Study on cover properties and repair methods based on lcc estimation of rc

infrastructure, Md. Shafiqul ISLAM et al, Department of Civil Engineering, The

University of Tokyo, Japan. (CERIE-285)

LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

) R

OO

M :

PG

D-1

9:30-9:50 Simulation of the breakthrough curve for the removal of methylene blue from waste

water by activated carbon of bombax ceiba, Ahmad Hasan Nury et al. SUST, Sylhet-


9:50-10:10 Stabilization and assessment of diffuse heavy metal pollutants in incinerated medical

waste, Md. Imran Kabir et al, SUST, Sylhet- 3114, Bangladesh (CERIE-310)

10:10-10:30 Selection of potential strain for the production of citric acid by solid state

bioconversion using oil palm empty fruit bunches. Md. Niamul Bari et al. Rajshahi

University of Engineering and Technology, Rajshahi- 6204, Bangladesh. (CERIE-

287)

10:30-10:50 Responses of bara nuniya (portulaca oleracea l.) and sorghum (sorghum bicolor l.) at

elevated concentrations of arsenic, Molla Rahman Shaibur et al. Jessore Science &

Technology University. (CERIE-286)

10:50-11:10 Vulnerability analysis of Bangladesh due to multiple natural hazards using gis

technique. Dr. Md. Monirul Islam et al. IUBAT- International University of Business

Agriculture and Technology, Dhaka, Bangladesh

(CERIE-276)

11:10-11:30 BREAK

11:30-11:50

Comparative study of hazards by floods and cyclone in Bangladesh. S. Islam et

al. IUBAT- International University of Business Agriculture and Technology, Dhaka,


11:50-12:10

Prediction of future temperature in north-eastern region of Bangladesh by using

historical data, M. Ahmed et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-271)

12:10-12:30

Technical and economic evaluation of water filtration system by using local

ingredients, A. I. H. Laskar et al. SUST Sylhet, Bangladesh. (CERIE-404)

12:30-12:50

Evaluation of optimum set of air pollution (PM10) control measure to attain

environmental standard of Dhaka city with minimized cost: comparison of the cost

with health damage, Md. S, Sheikh et al. Engineering division, Bangladesh Atomic

Energy Commission, Bangladesh. (CERIE-251)


25



CHAIR: Dr. Mushtaq Ahmed, Dept. of Civil and Environmental Engineering, SUST, Sylhet, Bangladesh.


MA

TE

RIA

LS

, W

AT

ER

RE

SO

UR

CE

&

EN

VIR

ON

ME

NT

AL

EN

GIN

EE

RIN

G

2:00-2:20

Resource recovery from water treatment sludge. Md. Ikbal Mahmud et al. SUST,


LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

) R

OO

M :

PG

D-1

2:20-2:40 Heavy metal removal by grafted acrylic acid for the water coming from abandoned

mines. Md. Imran Kabir et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-413)

2:40-3:00 Mediator based architecture to address data heterogeneity.

Md. Hasan Hafizur Rahman et al. BGC Trust University, Bangladesh. (CERIE-323)

3:00-3:20 Design a simple data structure using multilevel stack. Sonia Afrin et al. Dhaka

International University, Bangladesh. (CERIE-326)

3:20-3:40 Masonry buildings assessment in heritage areas: a case study for the older part of

Dhaka city, Ram Krishna Mazumder et al, BUET, Dhaka. (CERIE-317)

3:40-4:10 Impact on sustainability of Hail Haor By Integrated Water Management Activities,

Md. Misbah Uddin et al. SUST, Sylhet-3114, Bangladesh. (CERIE-434)

Importance And Scope of Conservation Of Wetland To Protect Environmental

Degradation, Md. Misbah Uddin et al., SUST, Sylhet-3114, Bangladesh. (CERIE-435)

4:10-4:30 Solidification of Solid Waste: Two case studies, H.M.A.Mahzuz et al. SUST, Sylhet,


4:30-4:50 Domestic Water Consumption Patterns in a Rural Village in Bangladesh, Md. Al

Amin, Civil & Environmental Engineering Department, Islamic University of

Technology (IUT), Gazipur-1704, Bangladesh. (CERIE-332)

4:50-5:10 Stress-strain characteristics of flexible pavement using finite element analysis, Md.

Tahmidur Rahman1, Department of Civil and Environmental Engineering, Islamic

University of Technology (IUT), Gazipur - 1704, Bangladesh. (CERIE-342)


ENVIRONMENTAL ENGINEERING SESSION

CHAIR: Dr. Narayan Saha, Dept. of Forestry and Environmental Science, SUST, Sylhet, Bangladesh.


MA

TE

RIA

LS

, W

AT

ER

RE

SO

UR

CE

an

d

EN

VIR

ON

ME

NT

AL

EN

GIN

EE

RIN

G

9:00-9:30 Development of a Household Compost Generation System with Organic Household

Waste, Rabeya Mariam, et al, Department of Environmental Sciences, Jahangirnagar

University, Savar, Bangladesh, Department of Industrial and Production Engineering,

BUET, Dhaka, Bangladesh (CERIE-445)

LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

)

RO

OM

: P

GD

-1

9:30-9:50 Earthquake vulnerability assessment for important structure (school and colleges) of

north eastern region of Bangladesh, K.M.Khaleduzzaman, Department of Civil &

Environmental Engineering, SUST, Sylhet. (CERIE-344)

9:50-10:10 Wave propagation characteristics of infilled soil, Emtazul Haque, Department of Civil

Engineering, The University of Asia Pacific, Dhaka; Department of Civil Engineering,

BUET, Dhaka . (CERIE-346)

10:10-

10:30

Fire Hazard Scenario in Chittagong: A Case Study, Md. Tahmidur Rahman1,

Department of Civil and Environmental Engineering, Islamic University of

Technology (IUT), Gazipur - 1704, Bangladesh. (CERIE-343)

26

DAY 3, 13/01/’11.


CHAIR: Prof. Dr. Md. Akhtarul Islam, Dept. of Chemical Engineering and Polymer Science, SUST, Sylhet- 3114,

Bangladesh


CH

EM

ICA

L &

PE

TR

OL

IUM

EN

GIN

EE

RIN

G

9:00-9:30 Investigation of dissimilar behavior of Ag (poly) and GC-Rh (poly) electrodes towards

the Nitrate (NO3-) reduction, M. Saiful Alam et al. SUST, Sylhet, Bangladesh.

(CERIE-100)

AC

AD

EM

IC B

UIL

DIN

G-

“B";

Ro

om

No

.:“1

11

”

9:30-9:50

Photocatalytic degradation of reactive dye in batch and continuous modes, M. Mohibul

Alam et al. SUST, Sylhet, Bangladesh. (CERIE-418)

9:50-10:10 Gas well deliverability test at Hobigonj gas field. Md. Ismail Hossain et al. SUST,


10:10-10:30 Recovery of chromium from tannery effluent, Hazzaz –Bin– Yousuf et al. SUST,


10:30-10:50 Extraction of ferromagnetic material from non-homogeneous solid-solid Mixture, M.F.

Ismail et al. BUET, Dhaka, Bangladesh. (CERIE-388)

10:50-11:10 BREAK

CHAIR: Prof. Dr. Saiful Islam, Dept. of Chemistry and Dept. of Biochemistry, SUST, Sylhet,

Bangladesh.

11:10-11:30 Cooperative study of biodiesel preparation methods, Kaniz Ferdous et al. SUST,

Sylhet- 3114, Bangladesh. (CERIE-395)

11:30-11:50

Natural gas pipe line design from ASHUGONJ valve station#3 to ZIA fertilizer

company limited and in an arbitrary power plant, Md.Towhidul Islam et al. SUST,


11:50-12:10

Reservoir characterization using geostatistical method, Bakhtiar Ahmed et al. SUST,


12:10-12:30

Preparation of biodiesel from waste cooks oil by using three step methods, Kaniz

Ferdous et al. SUST, Sylhet, Bangladesh. (CERIE-394)

12:30-12:50

Photocatalytic activities of TiO2 nanoparticles synthesized using solgel method

with presence of nanoporous polystyrene, Sharmin Rahman Snigdha et al. SUST,


12:50-1:10 Biosorption of Congo-Red dye on Azadirachta indica Leaf Powder,

Md.Rezaul Karim et al. SUST, Sylhet, Bangladesh. (CERIE-391)

27

DAY 3, 13/01/’11


CHAIR: Prof. Dr. Ashraful Alam, Dept. of Chemistry, SUST, Sylhet, Bangladesh.


CH

EM

ICA

L &

PE

TR

OL

IUM

EN

GIN

EE

RIN

G

9:00-9:30 Dr. M. Jasim Uddin, Associate Professor, Dept. of Chemical Engineering and Polymer

Science, SUST, Sylhet- 3114, Bangladesh.

“Self Cleaning Textiles: A Nanotechnology Approach”

AC

AD

EM

IC B

UIL

DIN

G-

“B";

RO

OM

NO

.:“1

13

”

9:30-9:50 Effect of pretreatment on waste tea leaves reinforced polyethylene compositesm. M.

Hassan et al. M C College, National University, Sylhet-3100, Bangladesh. (CERIE-

209)

9:50-10:10 A study on physical and thermal properties of jute and jute blended yarn. Md. Abdus

Shahidet al. Dhaka University of Engineering and Technology, Gazipur, Bangladesh.

(CERIE-295)

10:10-10:30 Effect of pretreatment with uv radiation on physico-mechanical properties of 1, 6

hexanediol diacrylate (HDDA) grafted banana fiber, N. K. Roy et al. M C College,

National University, Sylhet-3100, Bangladesh. (CERIE-212)

10:30-10:50

BREAK

CHAIR: Engr. Salma Akhter, Dept. of Chemical Engineering and Polymer Science, SUST,

Sylhet 3114, Bangladesh

10:50-11:10 Growth-promotion of tea plants with depolymerized alginates using gamma radiation.

M. A. Hossain et al., M.C.College, National University, Sylhet-3100, Bangladesh.

(CERIE-211)

11:10-11:30 Factorial analysis of lipid extraction from dried wastewater sludge for the production

of biodiesel. Muhammad N Siddiquee et al. The University of Western Ontario 1151

Richmond Street North, London, Canada (CERIE-412)

11:30-11:50

Explanatory study on mechanical performance of betel nut (areca catechu) fiber

polypropylene composite: effect of detergent treatment, J. Chakrabarty et al. M C

College, National University, Sylhet-3100, Bangladesh. (CERIE-213)

11:50-12:10

Characterization of in situ stresses, tensional strength factor, and horizontal

displacement around the open-pit excavation of the Phulbari coal basin and associated

problem with regional hydrogeology of NW Bangladesh, Dr. Md. Rafiqul

Islam,SUST. (CERIE-298)

12:10-12:30 Clinical waste management in Sylhet city, Husne Ara Moriom et al. SUST, Sylhet-


12:30-12:50 Double chamber microbial fuel cell (mfc) for electricity generation, Kallol Talukdar et


12:50-1:10 Permeability Estimation of Habiganj Gas Field from Well Logs, Md. Zayed Bin Sultan

et al. SUST, Sylhet-3114, Bangladesh. (CERIE-340)

28

DAY 3, 13/01/’11.


CHAIR: Mr. Mainuddin Ahmed, Director, House and Building Resource Institute, Mirpur Dhaka- 1216.

Session Time

Title Location

CIV

IL E

NG

INE

ER

ING

an

d A

RC

HIT

EC

TU

RE

9:00-9:30 Construction Management of a High-rise Building with Special Focus on Economic

Aspects, M. S. Islam et al, Department of Civil and Environmental Engineering,

SUST,. (CERIE-304)

AC

AD

EM

IC B

UIL

DIN

G “

C”

RO

OM

NO

. “1

17

”

9:30-9:50 Integrating Physical Planning In Street Crime Prevention in Khulna City: A Study on

Khulna Thana, Muhammad Rashidul Hasan, Department of Urban & Regional

Planning Chittagong University of Engineering & Technology (CUET), Chittagong,


9:50-10:10 Municipal Wastewater Treatment and Heavy Metal Removal by Constructed

Wetlands, Christopher Blazo. BUET, Dhaka, Bangladesh. (CERIE-242)

10:10-10:30 A study of soil structure interaction effects of a tall building on mat foundation

subjected to lateral loads, Mohammad Abdullah Nur, World University of


10:30-10:50 Seismic risk analysis for the schools of Sylhet city, Bangladesh,

Ram Krishna Mazumder at al. SUST, Sylhet, Bangladesh. (CERIE-275)

10:50-11:10

BREAK

11:10-11:30 Size effect of HPC under impact loading, A.S.M.Z. Hasan at al. Rajshahi University

of Engineering & Technology, Rajshahi, Bangladesh. (CERIE-283)

11:30-11:50

Non-structural mitigation for earthquake risk prone school in Sylhet, Dhaka And

Netrakona, Ram Krishna Mazumder at al. BUET, Dhaka, Bangladesh. (CERIE-284)

11:50-12:10

Building Construction Quality and Safety: A Case Study on Sylhet City, M. S. Islam

et al, Department of Civil and Environmental Engineering, SUST, (CERIE-305)

12:10-12:30 Renewable energy systems in residential buildings for new satellite towns of Dhaka:

barriers and probable solutions. Md. Mostafizur Rahman, SUST, Sylhet,


12:30-12:50 Triangular reinforced concrete beam: Effectives Evaluation, H.M.A.Mahzuz et al.

SUST, Sylhet, Bangladesh. (CERIE -125)

12:50-13:10 Numerical Investigation of Behavior of Retrofitted Flexural Cracked Beam with

Plate Bonding Technique, A. B. M. Amrul Kaish, Housing & Building Research

Institute, Bangladesh, (CERIE-186)

29

DAY 3, 13/01/’11.


Chair: Prof. Sadrul Islam, Dept. of Mechanical and Chemical Engineering, IUT, Gazipur, Bangladesh.

session time Title location

ME

CH

AN

ICA

L a

nd

IN

DU

ST

RIA

L E

NG

INE

ER

ING

9:00-9:30 Keynote Speaker: Prof. Sadrul Islam, Dept. of Mechanical and chemical

Engineering, IUT, Gazipur, Bangladesh.

LIB

RA

RY

BU

ILD

ING

(G

RO

UN

D F

LO

OR

) R

OO

M :

PG

D-2

9:30-9:50 Design and construction of a simple viscometer for incompressible fluid and

performance study, Mohammad Uzzal Hossain Joardder. Et al. Rajshahi University

of Engineering and Technology, Rajshahi- 6204, Bangladesh. (CERIE-403).

9:50-10:10 Supply chain performance measurement using QFD: a case study in garments

accessories industries of Bangladesh, Md Ashrafuzzaman et al. SUST, Sylhet,

Bangladesh. (CERIE-128).

10:10-10:30 Change over time reduction in garments industry through smed methodology, Md.

Mijanur Rahman et al. Masco Industries Ltd, Bangladesh. (CERIE-110).

10:30-10:50 Design, fabrication & performance test of closed loop auto-control two axis solar

tracker, A. Mahmudul Hasan. et al. Rajshahi University of Engineering and


10:50-11:10 BREAK

11:10-11:30 Effect of fuel type and EGR on emissions of a diesel engine at idling, Dr. Murari

Mohon Roy. et al. Rajshahi University of Engineering and Technology, Rajshahi-


11:30-11:50

Development of simulation software for designing duct of air conditioning system,

Mohammad Rezwan Sheikh. et al. Khulna University of Engineering and


11:50-12:10

Design, construction and performance test of a vortex tube cooling system

constructed by locally available materials, Mohammad Mahmudur Rahman. et al.


(CERIE-132)

12:10-12:30

Design, construction and testing of an earth tube heat exchanger (ETHE),

Md. Fahad Hossain. et al. Khulna University of Engineering and Technology,


30

DAY 3, 13/01/’11: SCIENCE & ENGINEERING

Chair: Professor Dr. Sabina Islam, Department of Statistics, SUST, Sylhet-3114, Bangladesh.


SC

IEN

CE

& E

NG

INE

ER

ING

9:00-9:30 Entrepreneurial Management: An International Study

Dr. Mohammad Abul Hasan, Additional District Commissioner, Sylhet, Bangladesh.

(CERIE-427)

AC

AD

EM

IC B

UIL

DIN

G “

E"

RO

OM

NO

. “3

25

”

9:30-9:50 Problems and prospects of special economic zone in Sylhet. Khondoker Rezwan

Tanvir, SUST, Sylhet, Bangladesh. (CERIE-222)

9:50-10:10 Food insecurity and coping strategy in Sunamgonj haor areas: status and

determinants. Mirza Nazmul Hasan, SUST, Sylhet, Bangladesh. (CERIE-423)

10:10-10:30 Analysis of spatial heterogeneity using power law. Tamanna Islam,

Iwate

University, Japan. (CERIE-205)

10:50-11:10 BREAK

11:10-11:30 Prospects of industrialization in Bangladesh: an empirical study in the southern

region. A.M.M. Nazmul Ahsan et al. Khulna University of Engineering and


11:30-11:50

Possibilities of industrialization-Bangladesh Perspective. Kazi Arif-Uz-Zaman et al.


(CERIE-254)

11:50-12:10

Active Flow Separation Control of an Airfoil. Md. Hasan Ali. et al. Khulna

University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-

168)

12:10-12:30 Prepaid Gas Measuring Concept Using GSM Networks Services.

Syed Abu Nahian, Et al. CUET, Chittagong. (CERIE-238)

12:30-12:50 Recent Development in the Semiconductor Technology of Graphene

Z.M. Hasib et al. BUET, Dhaka, Bangladesh. (CERIE-160)

12:50-1:10

Solve Boundary value problem of Shooting and Finite difference method Using

MATLAB. Sheikh Md. Rabiul Islam et al. Khulna University of Engineering and


DAY 3; 13/01/’11


CHAIR: Dr. Wasim Bari, Dept. of Computer Science and Engineering, Leading University, Sylhet


EL

EC

TR

ON

ICS

& C

OM

MU

NIC

AT

ION

EN

GIN

EE

RIN

G.

9:00-9:30 Modified intra_4x4 prediction scheme for h.264 video coding. Md. Salauddin Yusuf, Dept of EEE, KUET, Khulna-9203, Bangladesh. (CERIE-419)

AC

AD

EM

IC B

UIL

DIN

G “

E"

Ro

om

No

. “1

23

”.

9:30-9:50 Design and Simulation of a Multi-Language Digital Clock by Switching System.

R. R. Mahmud. et al. Ahsanullah University of Science and Technology. (CERIE-

196)

9:50-10:10 Linearization of voltage-controlled oscillator by microcontroller based PLL

frequency synthesizer. Md. Lutfor Rahman et al. Daffodil international university.

(CERIE-258)

10:10-10:30 Increasing Efficiency of Photovoltaic Polycrystalline Panels, Shuza Binzaid et al.

University of Information Technology and Science, Dhaka. (CERIE-198)

10:30-10:50 Design of alas/gaas/ge lattice matched multijunction solar cells.

Md. Jahirul Islam et al. KUET, Khulna. (CERIE-365)

10:50-11:10 BREAK

11:10-11:30 Microcontroller based digital voltmeter design, Tahsin Fahima Orchi. et al.

Ahsanullah University of Science and Tecnology, Dhaka. (CERIE-171)

11:30-11:50

Design and implementation of a remote sensing electricity supply control for

industrial applications, Muhibul Haque Bhuyan et al. Daffodil international

university. (CERIE-291)

11:50-12:10

Structural properties and temperature dependence of resistivity of pure co material

deposited co/si(001) and co/glass thin films. N.A. Shafi et al. Sar securities ltd,

Motijheel, Dhaka. (CERIE-302)

12:10-12:30 MobiLOAN: a mobile payment based microfinance technology to improve rural

microfinance service delivery and optimize the operational cost

Mohammad Sajidur Rahman et al. BUET, Dhaka, Bangladesh. (CERIE-321)

https://mail.google.com/mail/h/i6a189zvc9p0/?v=c&th=12cb13ad215bab66

31



CHAIR: Prof. P.K. Shadhu Khan, Chittagong University of Engineering and Technology, Chittagong- 4349, Bangladesh


EL

EC

TR

ON

ICS

an

d

EL

EC

TR

ICA

L E

NG

INE

ER

ING

9:00-9:30 Performance analysis of a simple power quality conditioner for mitigation of

harmonics, P.K. Shadhu Khan et al. Chittagong University of Engineering and

Technology, Chittagong- 4349, Bangladesh. (CERIE-366)

AC

AD

EM

IC B

UIL

DIN

G:

“E”.

RO

OM

NO

. -

“1

24

”.

9:30-9:50 Design and implementation of an intellectual security system for the world wide

appearance of owner, R. R. Mahmud et al. Ahsanullah University of Science and

Technology, Dhaka, Bangladesh. (CERIE-226)

9:50-10:10 Design, simulation and implementation of automatic load control with human

counting system of a space, R. R. Mahmud et al. Ahsanullah University of Science

and Technology, Dhaka, Bangladesh. (CERIE-247)

10:10-10:30 Share Market Price Prediction Using Artificial Neural Network (ANN)

Zabir Haider Khan et al. SUST, Sylhet, Bangladesh. (CERIE-229)

10:50-11:10 BREAK

11:10-11:30 Line coding selection for optical fiber communication system in presence of fiber

group velocity dispersion, Md. Habibullah et al. Khulna University of Engineering

and Technology, Khulna- 9203, Bangladesh. (CERIE-259)

11:30-11:50

Vector control of 4-switch 3-phase voltage source inverter fed induction motor

drive, Md. Habibullah, et al. Khulna University of Engineering and Technology,


11:50-12:10

Simulation of transient and steady state conditions of synchronous machines for

power system, Md. Moshiul alam et al. Rajshahi University of Engineering and


12:10-12:30 Investigation and demonstration of near end and far end crosstalks in multiconductor

microstrip transmission line, M. Masud Rana et al. Rajshahi University of

Engineering and Technology, Rajshahi- 6204, Bangladesh. (CERIE-264)

12:30-12:50 Variation Of Nonlinear Refractive Index And Nonlinear Absorption Co-Efficient Of

Linb03 Crystal Due To Varying Wavelengths, S. M. G. Rabbani et al. SUST,

Sylhet-3114, Bangladesh. (CERIE-432)

CONFERENCE CLOSING CEREMONY

Date: 13th

January 2011

2:15 PM – 3:30 PM

How to foster the linkage between the engineering education and industrial

requirements?


3:30 PM – 4:30 PM SUST, Campus Visit

4:30 PM – 6:30 PM Cultural Programme


6:30 PM – 7:15 PM Closing Session

7:30 PM From SUST to Upa Shahor, Garden Inn

8:00 PM Gala Dinner

Venue: Garden Inn, Upa Shahor, Sylhet

Documents

SESSIONS CERIE 2011 jan 09