19
Supplier and Dealer of Sewage Pump BDS Engineering

Sewage Pumps Supplier and Manufacturer India

Embed Size (px)

DESCRIPTION

Variety of Pressure pumps like Booster pump, Multistage pump, Hydropneumatic system, RO System, Water softener and different types of tanks.

Citation preview

  • Supplier and Dealer of Sewage PumpBDS Engineering

  • BDS Blairs Pump In IndiaBDS Engineering offers variety of sewage pump in India. Blairs pumps reduce sewage to a finely ground slurry for pumping into elevated septic or sewer destinations. Our Sewage Pumps are suitable for three phase as well as single phase power supply

  • Manufacturer Of variety of Sewage PumpsPumps are constructed of strong cast die body parts. so it is sure that material will remain best for long time.Pumps are constructed of strong cast die body parts. so it is sure that material will remain best for long time. These pumps are designed for higher efficiency having semi-open type impeller, which are hand finished for perfect smooth flow.

  • Sewage Pump Supplier IndiaThe Mud / Sewage Pumps are available in various capacities and different models suiting for permanent fixation, supporting on a trolley and for mounting right on the chassis of the mobile tanker into which the sludge / sewage is required to be sucked. In the latter option the pump can be made to run with the same engine, which is moving the tanker.

  • Variety of Sewage PumpMoplen Submersible PumpCast Iron Sewage Vortex PumpSingle Vane Sewage PumpSewage Cutter Pump

  • Moplen Submersible Pump

  • BLAIRS dirty Water Submersible pumps are equipped with open impellers which are suitable to lift waste liquids along with suspended solids. Most advanced and state of the art technology is used in manufacturing pumps it has the possibility to operate also if partially submerged.

  • The total absence of screws and motor cover in stainless steel one of the most technological advanced pumps obtainable in the market.

  • Cast Iron Sewage Vortex Pump

  • Cast Iron Sewage Souble Channel Pump is allowed to pump liquids containing suspended solid bodies with dimensions up to 35 mm and short fibers. Pumps are made of hard alloy and reliably well-sealed and equipped with overheat & overload protection devise,

  • CSCP (Cast-iron Sewage double-channel) Pump is equipped with a double-channel impeller.CSVP (Cast-iron Sewage vortex Pump) Pump is equipped with a VORTEX pumps.

  • Single Vane Sewage Pump

  • BIAIRS Single vane stainless steel submersible pump are mainly efficient and dependable in fixed installations by automatic operation with general motor specification and hard-faced mechanical seal and these pumps are mainly for professional use along with built completely in stainless steel.

  • Single vane impeller is mounted on the end of the drive shaft and enclosed in a large ring chamber framed by the pump body and the base.

  • Sewage Cutter Pump

  • Cutter Pumps are submersible vortex pump for dirty water, designed mainly for domestic use and industrial use. Their operating principle is that of a centrifugal pump with a retracted vortex impeller.

  • A large size ring chamber with a threaded delivery opening is machined in the pump body and closed by a cover, housing the suction opening, which is shaped to prevent suspended solids over a certain size from entering the pump.

  • Since the impeller is retracted with respect to the cover, water entering the front chamber lying between these two components assumes a vortex motion and is centrifuged in to the ring chamber leaving the pump via the delivery opening.

  • Contact us Address:318, Street No.4, Ground Floor, Govind Puri, Kalkaji, (Opp. Kalkaji Bus Depot) New Delhi - 110019Customer Care:+91-9311122211Telefax:011-26467250Email:[email protected]:[email protected]