AVAILABLE FROM YOUR EXPERT JANOME RETAILERAUSTRALIAJanome
Australia Pty Ltd.PO Box 1383, Moorabbin 3189 Victoria
www.janome.com.au
NEW ZEALANDJanome New Zealand Ltd Unit 7/236 Great South Road,
Drury, Auckland 2113 www.janome.co.nz JMA
1999
0
Sew
ist
780D
C/7
40D
C 1
218
SEWIST 780DC/740DC
Features
Number of stitches 80 40
Buttonholes 3 x 1-step 3 x 1-step
Direct stitch buttons Yes (20) Yes (20)
Foot pressure Yes, 6 levels Yes, 6 levels
Drop feed Yes Yes
Built-in needle threader Yes Yes
Automatic thread cutter Yes No
Easy set bobbin Yes Yes
Face plate thread cutter Yes Yes
Work space (width/height) 170 x 110mm 170 x 110mm
Wind bobbin without unthreading needle
Yes, using spare spool pin
Yes, using spare spool pin
Instructional DVD Yes Yes
Standard feet (7) Zigzag A, Zipper E, Overlock C, Overedge M,
Satin stitch F, Blind hem G, Buttonhole R
Maximum stitch width 7mm 7mm
Maximum stitch length 5mm 5mm
Sewing speed 70-820spm 70-820spm
Stitch reference chart Built-in Built-in
Lighting LED LED
Start/stop button Yes Yes
Reverse button Yes Yes
Auto-lock button Yes Yes
Needle up/down button Yes Yes
Stitch elongation Yes Yes
Screen type LCD with backlight LCD with backlight
Machine cover Hard cover Hard cover
Carry handle Short folding Short folding
Extra wide table Optional Optional
Sewist 780DC Sewist 740DC
Easy Set Bobbin No need to bring the bobbin thread up through
the needle plate to start sewing. Simply place bobbin in bobbin
case, run thread through the tension spring, left around the easy
thread bobbin slot and trim off the thread tail on the built-in
cutter. Thread the top thread and you are ready to sew.
Opening Face Plate Easy access to the top thread path makes
fixing threading issues or cleaning fluff build up from fabrics and
thread a breeze.
Stitch Chart With a built-in stitch chart, sewing has never been
easier. Located on the right end of the machine, the chart slides
in and out, so it's out of the way when you don't need it.
