Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
SFAT Self-Tracking-SERIESSFAT10
5.0 1.2
1.2
1.0
≤ 70 kW ab z=15Construction machines, pumps,
paper-making machines, compressors, textile machines, roller-table drives
Power Transmission Rotational Speed Peripheral Speed Synchronous Pulley Applications (Example)
ca. 10000 min-1 ca. 60 ms-1
Product Performance
Pitch(mm)
Min. # of Pulley Teeth(no back bending)
Min. # of Pulley Teeth(with back bending)
Min. Diameter ofFlat Idler running on
tooth side (mm)
Min. Diameter ofFlat Idler running on
belt back (mm)
15SFAT10 25 50 120
Minimum Number of Pulley Teeth and Idler DiameterStandard Material
TPUST11)
SpecificationsSpecifications
Pitch(mm)
CodeUltimate Tensile
Strength(N/10mm belt width)
TimingBelt
Maximum AllowableTensile Strength
Specific Belt StiffnessSteel Reinforced
(N/10mm belt width)
Specific Belt Mass(per 10mm belt width,
steel reinforced)(Per unit width/length)
SFAT10 MV
6400-
1600800 0.058 kg/mSFAT-Series
4.00 x 105 N-
10.0 2.5
2.0
SFAT Self-Tracking-SERIES
Widths (mm)In between widths availableWidths (mm)In between widths availableWidths (mm)In between widths availableWidths (mm)Widths (mm)In between widths availableWidths (mm)In between widths availableWidths (mm)
Open-Ended “M” Specifications
LengthsNylon coating tooth side (PAZ), Nylon backing (PAR),
Nylon both sides (PAZ-PAR)
50 75 100Any lengths available - Stock rolls 50 meters
Steel standardVA301 Stainless steel
Tension MemberOptions
Available Options
Widths (mm)In between widths available
880
eeth and Idler Diameter
Widths (mm)In between widths availableWidths (mm)In between widths availableWidths (mm)
Spliced and Welded “V” Specifications
Nylon coating tooth side (PAZ), Nylon backing (PAR), Nylon both sides (PAZ-PAR)
50 75 100
Steel standardVA301 Stainless steel
Tension MemberOptions
Available Options
Min. Joined Length (mm)Increasing in one tooth increments
Minimum Number of Pulley Teeth and Idler DiameterTeeth and Idler DiameterTMinimum Number of Pulley Teeth and Idler DiameterTeeth and Idler DiameterT
Widths (mm)In between widths availableWidths (mm)In between widths availableWidths (mm)
Spliced and Welded “V”Welded “V”W
TOptions
A
Min. Joined Length (mm)IncMin. Joined Length (mm)IncMin. Joined Length (mm)
Ordering Example: Polyurethane Timing Belt[WIDTH] [PITCH] / [LENGTH] [CONSTRUCTION]
75 SFAT10 / 4000 M
M / V