Type SH05 Mini Relays are ideal for Auxiliary wiring and remotecontrol schemes.Taking as little as 2 Watts pick up, the 24 VoltDC Mini Relay and Mini Contactor LS07 are ideal for operation of most elec-tronic control systems as an interface relay.Mini Relay SH05 is certified as a “Positive Guided Design” per the

IEC 947-5 standard and are independent test laboratory Certified.

With Pressure Wire Screw Terminals

16 I th Amps

Contacts

NO NC AC Operated

List DC Operated List

SH05. 22-*SH05. 31-*SH05. 40-*

234

210

$ 40$ 40$ 40

$ 50$ 50$ 50

With Flat Plug (spade) Connectors

Contacts

NO NC AC Operated

List DC Operated

List $ 55$ 55$ 55

$ 45$ 45$ 45

210

234

SH05 F.22-*SH05 F.31-*SH05 F.40-*

Ordering - Replace astric * with coil voltage suffix from suffix chart below. Part# Example: 2 N.O./N.C. 16 Amp Relay 120 Vac Coil Part # SH05. 22-A

* Coil Voltage SuffixAC* 60HZ 50HZ

-A-C-E-F-D-G

-H

DC*

120V208V/230V480 V600V

24V280V/277V

110V220V440V550V380V22V

240V

-MSW-NSW-OSW-PSW

-RSW

12VDC24VDC48VDC120VDC

220VDC

NORMALLY OPEN

1 0

2 1 0 0 1 0 1 2 3 4

NORMALLY Closed

0 1

0 1 2 1 2 4 3 2 1 0

Part #HSO5.10HS05.01

HS05.20HS05.11HS05.02HS05.01-001HS05.12HS05.04HS05.13HS05.22HS05.31HS05.40

LIST $10 $10

$13 $13 $13 $13 $16 $18 $18 $18 $18 $18

Voltage Part Number List

12-60 VAC LS05-EV05-60 $6690-240 VAC LS05-EV05-240 $66

Timer Module can be top mounted or side mounted to any SH05/LS05 Relay/Contactor.(AC/DC) Replacement Coils Part Number List Each

LK-C130 - * $ 20

* Replace with Coil Voltage Suffix From Chart above.

Surge Suppressors Part Number List Each

12 - 60 VAC LS05 -EB05 - 60 $1472 - 240 VAC LS05 - EB05 - 240 $14

Jumpers Part Number List Each

LS05 - EB05 $ 6

Parallel Pole Connector

MINI RELAYS - POSITIVE GUIDED DESIGN

FOR SAFETY CIRCUITS

AC/DC OPERATED RELAYS

TYPE SH05

RELAY

SH05 POSITIVE GUIDED DESIGN MINI RELAYS

Side Mount Auxiliary

Top Mount Auxiliary

Discount Schedule ST

Auxiliaries

16 Amps Ith

(A600UL)

Timers

p.33

20 Amp AC & DC Positive Guided Relays

Space Saving Dimensions

TypeFor critical safety circuits, self checkingduplicate circuits can be required.Thefollowing type SH multipole relays havepositive guided contacts.This “Positive Guided Design” Assures that no Normally Open contacts may be simultaniously closed with Normally closed contacts. In the event that a normally open contact welds in, the Normally closed contact will have a minimum Gap of 0.5mm.

“Positive Guided” contacts are not positivebreak or positive opening contacts.

*Per the IEC safety standard (IEC 947-5-1)

Available WorldwideRecognized as one of the leading heavy duty industri-al product lines. Type SH relays are available in over 100 countries including every industrial nation.

Industry Accepted & PreferredReliability demanding industries steel, oil,cement,chemical, automotive, widely use and demand typeSH controls in their systems.

Positive Guided SH5 Relays

Basic 4 poleSH5.40-*SH5.31-*SH5.04-*SH5.22-*

4302

0142

$62$62$62$62

$90$90$90$90

Adder poles Auxiliaries10 Amps 4pole(top mount)(A600) Max Aux.

LK-HS7K.10LS-HS7K.01

10

01

$12$12

$12$12

Auxiliaries (Side Mount)10 Amps(A600)

LK-HS8K.11LS-HS8K.20

12

10

$22$22

$22$22

MaxVoltage

Amperes

AC-15230400480600

p.34

User BenefitsSH5 Relays are loaded with features permittingconvenient to installation and allow more flexible configurations.They conform to both international standards and US approvals. SH5 Relays included duel (US / European) marking to assure global acceptance.

101054

6A4A2A0.7A0.35A

24 V48 V110 V220 V440 V

CONTINUOUSCARRYING CURRENT

20 AMP I th

20 AMP I th

AC DC60Hz 50Hz

- A- C- D- E- F- G

120 V208 / 230 V

480 V600 V24 V

110 V220 V380 V440 V550 V22 V

- MSW 12VDC- NSW 24VDC- OSW 48VDC- PSW 120VDC- RSW 220VDC

Part # with AC Coil * Add coil suffix

PolesNO NC

AC CoilOperation

DC CoilOperation

Contact Rating Per Pole

*Coil Voltage Suffix

Positive Guided Type SH5 Relays

Positive Guided Relays

AC-15

Rating

DC - 13 Amp Ratings

Part # example SH05.40 - A = 120 VAC Coil

(20 Amp)

85 29

AC Coil = 85mm DepthDC Coil = 115mm DepthAuxiliary 29mm Depth

Discount Schedule ST