Shabri Enterprises (Bhilai Test)

Bhilai Test is a complete industrial test house based

at BHILAI (C.G.).We has complete well equipped

facility for local stress relieving (PWHT) and non

destructive testing (NDT). It includes Dye penetrant

test (DPT), Magnetic particle test (MPT), Ultrasonic

Flaw Detection test (UT), Radiography testing (RT),

Positive Material Identification (PMI). We have

license from ATOMIC ENERGY REGULATORY BOARD

(AERB), for handling and operation of Industrial

Radiography Exposure Devices (IGRED).

The lab is monitored and maintained under the

guidance of Mr. V. Neelmanikandan AI, N, ASNT

Level III (MPT, PT, RT, UT & VT).We have a team of

qualified, trained and experienced personnel

working under his guidance who have undergone

training conducted by BARC/ASNT.

WHO WE ARE

WE RECENTLY ESTABLISHED � Tensile, face bend, root bend, side bend, all weld tensile test, impact, hardness test

� Chemical Analysis of

� Pig Iron

� Cast iron

� Plain carbon steel

� Alloy Steel

� Ferro Alloys

� The process of getting NABL accreditation for the laboratory is also under progress. Our NDT

facilities are approved by BHEL, L & T MHI, SEW, MECON

Radiography testing

facilities at

Bhilai test Bhilai test is well equipped with Radiography testing , We have

license from ATOMIC ENERGY REGULATORY BOARD (AERB), for

handling and operation of Industrial Radiography Exposure

Devices (IGRED).

Radiography testing professionals are qualified and certified to

RT Level I, II as per ASNT recommended practice SNT-TC-1A, Our

certified staff of NDT professionals provide quality inspection

services for a broad range of industries throughout the india and

abroad Radiography testing services are offered in our

laboratories, field locations and/or customer premises

Equipments for Radiography testing:

Industrial radiography camera –roli-I (Ir 192) of capacity 35 Ci

Industrial radiography camera –roli-II (Ir 192) of capacity 60 Ci

Liquid

penetrate

Inspection- Dye penetrant inspection (DPI), also called

liquid penetrant inspection (LPI) or

penetrant testing (PT), is a widely applied

and low-cost inspection method used to

locate surface defects in all non-porous

materials (metals, plastics, or ceramics). DPI

is based upon capillary action, where low

surface tension fluid penetrates into clean

and dry surface discontinuities. Penetrant

may be applied to the test component by

dipping, spraying, or brushing. After

adequate penetration time has been

allowed, the excess penetrant is removed

and a developer is applied. The developer

helps to draw penetrant out of the flaw so

that an invisible indication becomes visible

to the inspector .

Bhilai Test is capable of detecting common

and uncommon discontinuities open to the

materials surface. LPI is used to detect

casting, forging and welding surface defects

such as hairline cracks, surface porosity, and

fatigue cracks on in-service components.

OUR SERVICES

� Liquid Liquid Liquid Liquid PenetratePenetratePenetratePenetrate InspectionInspectionInspectionInspection

� Magnetic Particle inspection Magnetic Particle inspection Magnetic Particle inspection Magnetic Particle inspection

� Radiography TestingRadiography TestingRadiography TestingRadiography Testing

� Ultrasonic TestingUltrasonic TestingUltrasonic TestingUltrasonic Testing

� Visual InspectionVisual InspectionVisual InspectionVisual Inspection

� Positive Material identificationPositive Material identificationPositive Material identificationPositive Material identification

� Mechanical TestingMechanical TestingMechanical TestingMechanical Testing

� Chemical testingChemical testingChemical testingChemical testing

� Post weld heat treatmentPost weld heat treatmentPost weld heat treatmentPost weld heat treatment

� Stress Relieving Stress Relieving Stress Relieving Stress Relieving

� PreheatingPreheatingPreheatingPreheating

TRAINING AND CERTIFICATION

• NDT Certification courses

� NDT level I

� NDT level II

• Welder training and Qualification

• Radiographic film interpretation

• Training calendar

• Download application form

Training is in fact integration of human resources and technology. The technology transfer must consider how information, directions and instructions shall be translated in the minds of trainees. This will involve presenting basic principles, theory and contents of the training program in such a way that these may not only be easily understandable but trainees shall be able to adopt them. One of the fundamentals of training is that people learn better when they can connect what is taught to their own experience; therefore practical on-job training has gained importance in the training programs. Training system for NDT & welding at NDT has been designed in such a way that theory is blended with on-job practical training.

Offering a complete Global level

of Test Methods

Bhilai TestBhilai TestBhilai TestBhilai Test

Shabri Enterprises, 143-D

Light Industrial Area

Bhilai, Chhattisgarh 49001126

India

www.bhilaitest.com