STEALTH SERIES™

SHAFT ALIGNMENT SYSTEMSS-660 I S-670 I S-680B I S-680

ALIGN WITH THE BEST

Misalignment costs you serious money -Misalignment increases bearing and seal wear and leads topremature failures. It also increases power consumption ofthe motor, increasing electrical costs. For example, studiesshow that for a 3000 RPM motor, an increase in the couplinggap of just .015” can cause motor power consumption torise by 4%. Multiply this by hundreds of machines and thisadds up to serious loss of revenue each year.

Increasing alignment accuracy has been shown to:

•Reduce maintenance costs by up to 7%*

• Increase bearing and seal life by up to 8 times.*

• Increase machine availability by up to 12%*

•Reduce energy costs by 5% to 12%

•Significantly Increase coupling life

Why lasers are better - After years of successfuluse, it is now an established fact that lasers are simply thebest tool for performing the most accurate shaft, pumpand motor alignments in the shortest time possible. TheStealth™ Series lasers offer the following advantages overindicator-based methods:

•Up to 20 times higher measurement resolution.

•60-70% faster alignments than indicator-based methods.

•Automatic calculation of alignment results, shim andmove values without having to use graph paper and calculators!

•With our Easy-Guide™ program flow, easy-to-followscreens to guide you through the alignment, saving on training time and costs

•No-touch data taking with hundreds of data points versus a max of 4 points with indicators, increasing accuracy and speeding up alignments

•Live move data to help you align your motors quicker,eliminating guesswork

•Eliminates indicator bracket sag

•Printed, color alignment reports

Worldwide leader in laser alignment technology - Hamar Laser developed the very first 4-axis shaft alignment system in the early 1990's. It wasahead of its time and even today is unmatched by ourcompetitors. Building on that innovation, we introducedthe Stealth™ Series Shaft Alignment Systems that are themost accurate in the industry and are completely wirelessfrom top to bottom - an industry first. Hamar’s breadth ofexperience covers a wide range of applications and extendsacross many industries, so you can have confidence that analignment done with a Hamar system means it’s done right.

Completely wireless - Fully wireless Bluetooth®operation is standard on all lasers in the Stealth™ series,eliminating potentially dangerous cables from the workarea. This is especially important on large motors whererotating shafts requires power assistance. It also eliminatesthe need for extension cables for long spacer-shaft appli-cations. The Bluetooth radio module is sealed into the IP67 target housing, does not require additional batteries

and has a an industry-leadingwireless battery life of 14 hours.

Easy-Guide™ screen navigation - TheStealth™ Series ground-breaking hardware is comple-mented by innovative and highly user-friendly software,driven by our Easy-Guide™ screen navigation, which is sofeature-rich and easy to use that you can all but take it outof the box and use it. And if you forget something, built-inhelp text is just a click away.

Up to 15x higher accuracy - The Stealth™ Seriesutilizes the latest electrical design and components as wellas super-linear PSD sensors to offer the most accurate shaftalignment systems available. Our systems are up to 15 timesmore accurate that our competitors’ top-of-the-line systems.Our entry-level S-660 is even 2.5 times more accurate thatour competitor’s professional series laser!

Familiar off-the-shelf data displays - All 4systems use familiar Windows® operating system-based display devices that are readily available from standardcomputer suppliers. This means there are no highly expensive, proprietary, display devices to replace if broken.A quick trip to the computer store to buy a replacement isall that is required.

www.hamarlaser.com

ALIGNMENT LASERS. SIMPLY THE BESTTOOL FOR SHAFT ALIGNMENT.Accurate alignment of motor shafts to pumps, motors, blowers, etc. is critical to reducingmaintenance costs and keeping crucial machinery up and running.Taking the time to accurately align your machines will reduce costs and increase reliability.

Shaft Alignment Laser Systems

WHY MORE COMPANIES ARE ALIGNING WITH HAMAR.

Research shows 50% of all machine downtime is the result of poor alignments

BEARING LIFE VS. MISALIGNMENT

% o

f C

atal

og

Lif

e

Misalignment (in./in.)

100

80

60

40

20

0 .001 .002 .003 .004 .005 .006 .007 .008

More Options, Better Solutions - 4 systems, 13 platform configurations

By using readily available, off-the-shelf data display platforms, weare able to offer maximum flexibility to choose the system that bestfits your needs. Choose from 13 different platform configurations tomeet your specific needs:

Source: Robert E. Biggs, Engineering Conference 1990

*Source: Reliability Centered Maintenance Guidefor Facilities and Collateral Equipment - NASA

With features like Bluetooth® on all systems, 3 and 5-axis targets with automaticsweep function, sub-micron resolution, the largest detector range in the marketand large color graphics, the Stealth™ Series of shaft alignment lasers are rapidlybecoming the best choice for shaft alignment.

“We have used the systemand it really is good. I wasable to pick it up and aligna motor accurately thefirst time with very littletraining and no previousalignment experience.

“

—Jeff FRoanoke Cement

S-660 3-Axis Shaft Alignment System

S-670 3-Axis Shaft Alignment System

S-680B 5-Axis Shaft Alignment System

S-680 5-Axis Shaft Alignment System

SystemSmartPhone

RuggedPDA

RuggedTablet

RuggedLaptop

• •••

••

••

Semi-RuggedTablet

•••

• •

45 years in the making - We know how to makealignment lasers. We’ve been doing it for 45 years, shaftalignment for 22 years. So when we decided to redesignour shaft alignment systems, we worked on everything,from the electronics to the brackets to the software, to bringyou the best, most accurate, easy-to-use series of laseralignment systems on the market today. And we made theentire series wireless because we all know how much of apain wires can be, not to mention potentially dangerous, too.

We also worked very hardon our software to make itso easy to use that trainingis only needed for the morecomplicated applications.One of our distributors toldus that his users can put thesystem away for a monthand take it out of the boxand start using it withouthaving to pull out a manual.Talk about easy!

Two lasers, one sensor means 50% higheraccuracy - Almost all other laser alignment systemsuse 2 lasers and 2 sensors in their shaft alignment systems. With our patented Dual-Beam™ technology, weuse only one sensor with 2 uni-directional lasers, whichcuts the error rate by 50%, giving you a more accuratemeasurement.

Large-range sensors with up to 0.5 micronresolution - 1 or 2-axis super-linear PSD detectorsprovide up to 33 mm (V) x 13 mm (H) of measuring area,a big benefit for long-distance shaft alignment applications. And these sensor provide up to 0.0005 mmresolution, too.

Duo-Plane™ live move screen - An exclusive,time-saving feature from the T-1290 5-Axis Target that allows the user to simultaneously view a live alignmentscreen for both thevertical and horizontalplanes (4 axes) with-out having to rotatethe shafts. This is critically important onlarge machine applica-tions where tightening the bolts at the end of the alignmentcan create horizontal movement of the machine, causingthe user to have to redo the alignment check.

2 Laser-2 Detector Technology (2 lasers, 2 directions)

Dual-BeamTM /Dual-FanTM Technology (2 lasers, 1 direction)

Rugged, IP 67 sealed housings - All Stealth™Series alignment hardware “heads” are compact andrugged, highly water resistant (to 3 M) and built to quicklyand easily provide clear, dependable, accurate alignmentdata. They feature IP67 environmental protection andrugged handheld controllers featuring a high resolution VGA touchscreens.

Linearized sensors up to 15x more accurate - With linearization error rates as low as < 0.15%, our Stealth Series systems offer up to 15 timeshigher measurement accuracy than our competitors. Accuracy means better and faster alignments (more accurate shim calculations) and longer machine life, saving you even more money.

2 and 4-axis live move screens - The S-660and S-670 systems provide a simultaneous 2-axis “live”display of move and foot values with continuously updatinggraphics to illustrate the motors’ alignment in either

horizontal or vertical axis (plane)of the alignment. The S-680 offers a simultaneous 4-axis (2plane) “live” display with a dual-view of the alignment motorgraphics that update with eachmove of the motor.

Measurement value noise filter - Variable dataaveraging allows the user to choose the amount of datafiltering to reduce the effects of poor measuring environments, such as vibrations and air turbulence.

Fixed angular resolution for close-coupledapplications - Whether the heads are 1 inch (25 mm)or 10 feet (3 m) apart, the angular resolution is the sameand up to 10 times higher than the highest angular tolerance. This means that for even the closest-coupledapplications, you will have more than enough angular resolution to achieve high-accuracy alignments.

No need for rough-in alignment - With our largemeasuring range and high accuracy, rough-in alignmentsare not needed to get the alignment close enough so thelaser can be used.

Print report file transfer: We do the workfor you - Plug in the PDA into a computer with ourprint software and Hamar Active Sync installed and the

alignment print filesare automaticallytransferred to the PC’sprint folder. Open theCouple5 print softwareand click on the file toview and print the re-port in color.

STEALTH SERIES:TECHNICAL OVERVIEW

Shaft Alignment Laser Systems

www.hamarlaser.com

Did you know that nearly 50% ofthe price of our competitor's laserscomes from the display box?

• Patented Dual-Beam™/Dual-Fan™ technology

•Bluetooth® connectivity across all products

• Entire series newly designed with latest electronics

• Easy-Guide™program flow leads the user through the screens

•Off-the-shelf platform display options

• Laser industry’s highest accuracy

Dual-Beam™ detector technology

Allows highly accurate measurement ofoffset and angle simultaneously, usingtwo 0.5-degree laser fans and two PSDs.This provides full angular measuringrange over the entire operating rangebetween laser and target, unlike 2-laser,2-detector systems that have severelyrestricted angular measuring rangewhen the distance between laser andtarget is greater than 3 feet (1 m).Blinking laser fan technology providesambient light protection.

Why Stealth™ technology is better over long distances

A major problem with 2-laser/2 detectorshaft systems is trying to use them onlong-distance applications. As the upper illustration shows, when you try to makemoves to the motor, the long distancemakes the readings very sensitive to angularchanges. For example, a tiny angular move-ment of .0005"/in (0.05 mm/100 mm) at10 feet (3 m) will cause the laser beam to

move in offset by .060" (1.5 mm)! Thismakes aligning the motor's offset value verydifficult to do especially for the horizontalaxis. With our uni-directional laser technol-ogy, however, angular moves to motor donot move the laser beam at all and thereforedo not affect the offset values! This meansaligning the motor is amazingly easy, especially over long distances. Beam 2

Beam 1

A patented technology that allows the measurement of offsetand angle simultaneously with onlyone PSD, increasing accuracy by50%. Also provides an amazing +/- 5degrees of angular range for longdistance applications and an angularresolution that is 10 times higherthan the highest angular tolerance.Blinking laser technology providesambient light protection.

Dual-Fan™ detector technology

Fan 1

Fan 2

Laser/target are prealigned to the brackets - very useful for rough

alignment on new installations

On Target LED – Red means laseris blocked, green means laser is onon target. Blinking green meansScanning Laser Mode (L-750).

Bluetooth LED – Green meansthat the Target is connected tothe computer. Blinking yellowmeans data is being transmitted.

Battery LED – Green means ok, yellow means charge.

Power/USB port – Target can beused while plugged in. Also usedfor data backup cable.

Database managementWhen you create a new machine in Couple6 software, it automatically creates a folder on your tablet and then saves each new alignment file forthat machine in the folder. This allows you to keep a history of alignment for that machine so you can go back and easily collect historical data fortrending purposes. Each file is time and date stamped so you can save multiple copies on the same date if needed.

www.hamarlaser.com

INDUSTRY-LEADING COUPLE6 SOFTWAREFOR TABLETS AND PCS.

Shaft Alignment Laser Systems

Did you know our S-680 is 15 timesmore accurate than most otherlaser system on the market?

Project Menu: Start new projects, manageold alignment projects, review savedfiles and create project templates.

Step 1 - Machine Type, Dimensions & Tolerances: Select machine and couplingtype, enter dimensions and select tolerances. Can also enter user-definedtolerances.

S-680 Software features

Included features: Arc Mode™ • Auto-Clock™ • Auto-Sweep™ • Bolt Bound™• Point Mode • Recommended Tolerances • Repeatability Table • Report Software for PC • 7 Spacer Shaft Formats • Soft Foot • Thermal Growth atCoupling • Thermal Growth Calculator • 10,000 Saved Files • UncoupledMode • User-Defined Tolerances • Vertical MachinesOptional Software: Machine Train Software

Taking Data with UncoupledShafts: Available on both Couple5 & 6, simply rotate laserto any position, then sweep thetarget past to take a data point.Continue until enough data hasbeen taken to generate the results.

Vertical Motor Program: For ver-tically mounted, flange-type mo-tors, enter motor dimensions,select tolerances and numberof bolt holes and Couple5 willcalculate the flange shim values.

Bolt Bound™: Enter the pump’sdimensions and then lock different combinations of themotor and pump feet to seehow it affects the alignment.The graphics and shim valuesautomatically update with eachclick.

Step 3 - Soft Foot Check: Easy-to-followprocedure for checking Soft Foot, acommon problem that can cause manyalignment problems. Calculates shimscorrections, too.

Step 4 - Measure Misalignment: Up to 5data taking modes to record data foreven the most difficult applications. Savemultiple sets of data to check repeatability. Data can be archived.

Step 4 - Measurement Results: Click on aset of alignment data to display color-codealignment results. Red means out of tolerance, yellow means “good” and greenindicates “excellent”. Foot values are alsodisplayed.

Step 5 - Live Move Screen - Motor View:Featuring our Duo-PlaneTM display thatshows both vertical and horizontal planes(axes) updating simultaneously as themotor is being aligned. When displaysturn yellow or green, you're done!

Step 5 - Coupling View: For those usersused to gap/offset indicator methods,the Step 5 Live Move Screen can beswitched to Coupling View to show thealignment directly at the coupling.

Sample Report

Spacer Shafts: Select SpacerShafts, enter the spacer lengthand Couple5 will convert thealignment results to GapA/GapB, the standard spacer-shaftformat.

Flip It™ Feature: Both Couple5and Couple6 allow the user toflip the motor graphics to matchthe pump/motor orientationwithout having to turn the display upside down!

Vertical Motor Program: The industry’s only vertical alignmentdisplay with live graphical dis-plays of the motor’s alignmentalong with shim values for allbolt-hole locations.

Bolt Bound™: Enter dimensionof the pump, and then lock different combinations of themotor and pump feet to see howit affects the alignment. Thegraphics and shim values automatically update with eachclick.

Spacer Shafts: Select SpacerShafts, enter the spacer lengthand Couple5 will convert thealignment results to 7 differentspacer-shaft formats.

Couple6

Couple5

ADVANCED FEATURES FOR COMPLEX APPLICATIONS.

Step 1 - Thermal Growth: Enter thermalgrowth values at the coupling or the feet(or use the foot value calculator) to automatically offset alignment results.The Thermal Growth motor/pump graphicswill also update to show the effects.

Step 2 Laser Setup Screen: Provides live,4-axis, raw alignment data to initializethe system and maximize measurementrange. On-screen graphics show youwhich direction to move the laser andtarget during the setup. Can also beused for Rough Alignment.

Tour Couple6 Software | Click here

Choose the one that’s right for youWith 4 systems and 13 license and platform options tochoose from, the Stealth™ series offers a system to meetevery shaft alignment need. All systems offer our patented

Dual-Beam™ or Dual-Fan™ technology and can be combined with a smart phone, rugged PDA, industrialtablet or laptop. There are also a lot of software featureoptions to choose from to customize the system for yourspecific needs.

Auto-Clock™Thermal Growth /CouplingRecommended TolerancesSave 1,000 FilesVertical MachinesAuto Sweep™Save 2,000 FilesThermal Growth/CalculatorSpacer ShaftsArc Mode™Point ModeUncoupled ModeResults Table & HistoryBolt Bound™Vertical Move ScreenUser-Defined TolerancesTemplatesBasic Bracket SetUpgraded Bracket SetTrain Module for PC

IncludedIncludedIncludedIncludedIncludedOptionalOptionalOptionalOptional

n/aOptional

n/aOptionalOptionalOptionalOptional

n/aIncludedOptional

n/a

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncluded

n/aOptionalOptionalOptionalOptionalOptionalOptional

n/aIncludedOptionalOptional

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptionalIncludedOptionalOptional

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncluded

n/aIncludedIncludedIncludedIncludedIncludedIncluded

n/aIncludedIncluded

n/a

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedOptional

Couple5 & Couple6 Software Features

S-660STCouple6 Tab

S-670Couple5 PDA

S-680BTCouple6 Tab

S-680PCouple5 PDA

S-680TCouple6 Tab

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedOptionalOptionalOptionalOptionalOptionalOptionalOptionalOptionalIncludedOptionalOptional

S-670Couple

“We have used the system and it really is good. It got usthrough the massive soft foot issues reasonably quickly,and the alignment was a breeze. The controls were simpleand intuitive, and the touch screen made data entryvery quick. I was able to pick it up, and align a motor accurately the first time, with very little training and noprevious alignment experience. Thank you for makingsuch an easy to use and accurate system.”

Jeff F. Engineer Roanoke Cement Company

“With this alignment tool (S-680) we have done roughly70 – 80 alignments, this has consisted of the followingequipment but not limited to, compressors, gearboxes,pumps, fans and motors. We find the major advantage ofthe machine is the fact that there is no cabling involvedbetween the two laser heads and the PDA unit. The battery life of the PDA unit is much longer than most otherunits we have worked with. The machine is extremelyaccurate. Uncoupled mode is quite handy.”

Alignment tech IDEAS Solutions

www.hamarlaser.com

Shaft Alignment Laser Systems

OptionsBracket & Chain Sets

A-970A Chain Bracket Upgrade (6", 12" posts, extra chain for 1-10" diam. shafts)

A-980A Chain Bracket(6" & 12" posts and extra chain for 1-10" diam. shafts)

A-980C Extra Chain Sets 1"-12" Shaft Diameter

A-980NRA Non-Rotating Shaft Brackets

A-980NRB Non-RotatingLarge Shaft Bracket

A-980OF Offset Brackets

A-982 Magnetic Brackets (set of 2)

T-1285B Outdoor Light Filter

A-986 Magnetic Coupling-Flange Slider Bracket

Other Options;

R-1340 Smart Phone Data Platform

R-1345 Ruggedized PDA Device

R-1342T Ruggedized Tablet

R-1342 Ruggedized Laptop Computer

Geo Software and Accessories

L-750 Auto-Rotating Laser with P-R base

A-987 Flatness Measuring Fixture for T-1285/T-1290 Targets

S-1388 Plane5 Software

S-670 is our mid-level system with more features and higher accuracyfor more difficult shaft alignment applications. Choose from 3 differentplatform options (rugged PDA, semi-rugged tablet or fully ruggedtablet) to display our Couple5 or Couple6 Shaft Alignment Software,both of which offer an array of optional software features to handle complicated applications.

With standard wireless communication, color software and high accuracy, the S-660 offers the best value in entry-level shaft alignment lasers. Its Dual-Fan™technology allows the use of fan-type laser without having to increasepower so distances of 15 feet can be easily achieved. Choose from a smartphone, rugged PDA, semi-rugged tablet or fully-rugged tablet to run ourCouple5 or Couple6 Shaft Alignment Software.

THE STEALTH SERIES - 3 WIRELESS SYSTEMS TO MEET YOUR NEEDS

“As one recent trainee, previously experienced inusing SKF, Rotalign andOptalign Smart systems,told his boss after ourtraining session: I am very impressed with thissystem. It just tells youwhat to do next!

“A-980NRA Non Rotating Shaft BracketA-980 Bracket set

A-980OF Offset Bracket A-982 Magnetic Bracket

The S-680 is the next-generation in laser shaft alignment. It is the most accurate and highly featured laser system of the market-leading Stealth Series, designed for the most demanding and complex laser alignmentapplications. Utilizing our patented Dual-Beam™ technology, wirelesscommunication and powerful software, the S-680 is the ultimate shaftalignment system.

S-6805-AXIS WIRELESS SYSTEM

S-6703-AXIS WIRELESS SYSTEM

S-6603-AXIS WIRELESS SYSTEM

Paul F. IS Tecnik

Shaft Alignment Laser Systems

Hamar Laser Instruments, Inc.

5 Ye Olde Road • Danbury CT 06810 • USA

Phone: 800-826-6185 • Fax: 800-730-4611 • Int’l: +1-203-730-4600

E-mail: sales@hamarlaser.com

www.hamarlaser.com

©2013 Hamar Laser Instruments, Inc. U.S. and foreign patented and/or patent pendingMade in the U.S.A. 05-2013 (0000)

http://www.hamarlaser.com/?option=com_content&view=article&id=185

Find a distributor near you

If you would like to learn more about Hamar Laser Stealth Series please visit www.hamarlaser.com

North America

South America

Europe

Africa

Asia

Australia