shaikiat tex 2356

8/12/2019 shaikiat tex 2356

1/13


2/13

Southeast UniversityDepartment Of Textile EngineeringI/A 251 252 Tejgaon Dhaka Bangladesh

Prepared By : Mazadul HasansheshirID: 201000040000813thBatchWet Processing TechnologyEmail:[email protected] University


3/13

A product of substantial length & relatively small cross-section consisting of fibres or filaments with or withouttwist for produce fabric. By the technology ofmanufacturing yarn is known Yarn ManufacturingTechnology.

In the technology there are some part-Blow roomCarding

DrawingSimplexRing-spinningWinding


4/13

1. Bale Breaker2. Mono Cylinder3. Dual Cylinder4. Dedusting unit15.

Step Cleaner6. Porcupine Opener17. Dedusting unit28. Porcupine Opener29. Dedusting unit 3

10. Scutcher

Reference : New Meghna Textile Mills Ltd.


5/13

A British textile machinery Company.

Crosrol has introduced a completely new range of cotton blowroom


6/13


7/13


8/13

the simplest solution to bale opening;

capable of processing up to 4 differentmaterial assortments simultaneously.

Cutting head widths of 1.7M & 2.3Mtogether with un-restricted track lengthsenable uses to lay down as many as 200 baleson each side.

production rates of up to 1500Kg per hour


9/13

Designed to take advantage of theexceptionally efficient Bale-opening of the

Crosrol ABO the Crosrol Pre-Cleaner (CPC)

through its unique single sheet material

processing technique gives not only

exceptional Cleaning but also maximum fibreyield with minimal Nep generation when

compared to other first stage cleaners

currently available.

With multi-blend processing capabilities

together with a production rate of up to2000Kg per hour multiple opening lines can

be fed from a single unit.


10/13

The Crosrol range of OpeningBlenders with Four & Sixchambers.

Blending power in comparison

with conventional serial-fillblenders.


11/13

the Crosrol Fine cleaner significantly reduces

the negative side effects familiar with multi-

roll intensive cleaners

This together with a wide range of both

Pinned very high production rates up to 750Kgs per

hour.


12/13

Unique principle for the removal of Microdust and Nep from the Cotton fibre

Rotating disc transfers the fibres throughNegative & positive pressure quadrants.

Minimal moving parts ensure simpleoperating with ultimate reliability.

Insensitivity to pressure differentials negatethe need for additional pressure controlling

fans thus significantly reducing powerconsumption.


13/13

Halifax during the past 40 years. Original spare parts manufacturingis undertaken at Crosrol UKs modern machine facilities in

Bradford.The complete range of parts is available for all the

machines

A range of performance packs designed to improve the productivityof existing Crosrol cards and blowroom installations.

Mechanical parts include:

Aluminium plates

Crosrol underscreens

Flats (stationary and revolving) Pinned rollers

All mechanical parts, belts, gears, coilers and reduction gearboxes.

Card wire

Filters and fans

Electrical components

Documents

shaikiat tex 2356