Upload
chase-carson
View
52
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Shake Table Testing of Unreinforced and Reinforced Soil Slopes. Francisco Pineda Corey Negrete Giancarlo Cozzi. Acknowledgements. Thank you to Dr. Jon Stewart, Dr. Bob Nigbor, and the NEES@UCLA laboratory Thank you to Sherry Hormozi, Audrey Pool O'Neal, and Rick Ainsworth. - PowerPoint PPT Presentation
Citation preview
Francisco Pineda
Corey NegreteGiancarlo Cozzi
Acknowledgements Thank you to Dr. Jon Stewart, Dr. Bob
Nigbor, and the NEES@UCLA laboratory
Thank you to Sherry Hormozi, Audrey Pool O'Neal, and Rick Ainsworth
Slopes All Over the WorldAll over Los Angeles
and the rest of world, we are faced with soil slope problems due to earthquakes, landslides, and erosion
Civil Engineers attempt to solve these problems in a number of ways
Our project conveys one of the ways we solve these problems and how significant it can be.
Soil SlopesA critical slope is the
maximum angle with the horizontal at which a sloped bank of soil of a given height will remain undeformed without some form of support.
Different types of soil have different critical slopes
The particular soil that we used in our experiment was sand which had a critical slope of around 40 degrees
Reinforced Slopes Another one of the ways Civil
Engineers attempt to solve slope problems is by using reinforced slopes.
A reinforced slope is a series of layers of soil secured by fabric or mesh which form a secured slope
A few of the reasons why reinforced slopes are used: Allows construction at slope
angle greater than that of the friction angle of the soil
Improves the seismic stability of the slope
Project OverviewIn order to
demonstrate how soil slopes behave during an earthquake, we needed to build a chamber and fill it with sand to represent a real slope in nature.
Tasks completed Built a box (chamber) Secured chamber to a shake
table Constructed slopes and
performed tests Analyzed data
Giancarlo creates the slope inside the chamber
Building the ChamberWe first drew design
drawings on Microsoft VisioAfter calculating dimensions
and gathering materials, we began building our box.
Dimensions: 36” x 12” x 12”
Side View Sketch of Chamber
Top View Sketch of Chamber
Unreinforced Slope TestsTest #1 and #2
We placed the chamber full of sand with a critical slope onto a shake table
The test was then conducted by shaking the chamber at a frequency of 1 and 2 Hz and we steadily increased the amplitude
We then recorded at which amplitude the slope failed
Reinforced Slope TestsTest #3 and #4
We arranged the sand into 8 layers separated by tissue paper (the tissue paper simulated “geomembrane” that would be used in real installation)
The test was then conducted by shaking the chamber at a frequency of 1 and 6 Hz and we steadily increased the amplitude
We then recorded at which amplitude the reinforced slope failed
Calculating Acceleration From Measured Displacement
Given the frequency (Hz) and the amplitude (inches), we can model the displacement as: s(t) = A sin (ωt)
We can then calculate its acceleration by differentiating the displacement function twice.Acceleration = a(t) = -(A)(ω²) sin (ωt)
Real Life ComparisonIf we compare the results from our test to
actual measurements of recent earthquakes, such as the 1994 Northridge Quake, we can see that our unreinforced slope would have failed almost all across the Los Angeles Area
However, our reinforced slope, which is able to withstand a higher acceleration, would only have failed just around the epicenter of the earthquake.
What does it all mean?As predicted, the reinforced slope withstood a
higher amplitude and higher frequency before collapsing than did the unreinforced slope
Even the very weak reinforcement used in this case was effective at providing slope reinforcement
We have developed lognormal fragility functions for reinforced and unreinforced sand slopes. Fragility functions like these are used in probabilistic seismic design.
The End