Upload
phamkhanh
View
225
Download
0
Embed Size (px)
Citation preview
Pferd flap discs Polifan Shape
According to EN standard Flat PFF
Shape
Conical PFC
Flap disc type SG A (performance range)
For surface grinding and edge grinding. Abrasive material Aluminum oxide.
Achieves very high stock removal rates even at low contact pressure.
For steel, stainless steel, wood and plastics.
PFERDERGONOMICS® durable reducing of vibration, noise and dust emissions.
Number Diameter Grit size Shape
440300 115 40 Flat
440301 115 60 Flat
440302 115 80 Flat
440303 115 120 Flat
440304 125 40 Flat
440305 125 60 Flat
440306 125 80 Flat
440307 125 120 Flat
440309 180 40 Flat
440310 180 60 Flat
440311 180 80 Flat
440312 180 120 Flat
Number Diameter Grit size Shape
440339 115 24 Conical
440340 115 40 Conical
440341 115 60 Conical
440342 115 80 Conical
440343 115 120 Conical
440343B 125 24 Conical
440344 125 40 Conical
440345 125 60 Conical
440346 125 80 Conical
440347 125 120 Conical
440348 180 24 Conical
440349 180 40 Conical
440350 180 60 Conical
440351 180 80 Conical
440352 180 120 Conical
Flap disc type A-Cool SG INOX + ALU (performance range)
Performs exceptionally well on sheet metal and thin sectional material. Specially for stainless steels (INOX),
aluminium and non-ferrous metals. Abrasive material: Aluminum Oxide + Coolant. Ensures low build-up of heat in
the work pieces when used with minimum contact pressure on variable speed angle grinders at low rpm levels.
For weld dressing and surface grinding with low heat input.
For aluminium grinding use only grit 40 and 60.
Number Diameter Grit size Shape
440313 115 40 Flat
440314 115 60 Flat
440315 115 80 Flat
440315B 115 120 Flat
440316 125 40 Flat
440317 125 60 Flat
440318 125 80 Flat
440319 125 120 Flat
440320 180 40 Flat
440321 180 60 Flat
440322 180 80 Flat
440323 180 120 Flat
Pag. 44/04
Number Diameter Grit size Shape
440353 115 40 Conical
440354 115 60 Conical
440355 115 80 Conical
440355B 115 120 Conical
440356 125 40 Conical
440357 125 60 Conical
440358 125 80 Conical
440358B 125 120 Conical
440359 180 40 Conical
440360 180 60 Conical
440361 180 80 Conical
440362 180 120 Conical
Flap disc type Z SG POWER STEELOX (performance range)
Zircona Alumina Z grain for steel and Stainless Steel (INOX).
Is an high-performance abrasive medium delivering optimum performance on high powered angle grinders at high
contact pressure.
For weld grinding and edge finishing.
For high perfomance angle grinders with high surface pressure.
Number Diameter Grit size Shape
440381 115 40 Flat
440382 115 60 Flat
440383 125 40 Flat
440384 125 60 Flat
440385 180 40 Flat
440386 180 60 Flat
Number Diameter Grit size Shape
440387 115 40 Conical
440388 115 60 Conical
440388A 115 80 Conical
440388B 115 120 Conical
440389 125 40 Conical
440390 125 60 Conical
440390A 125 80 Conical
440390B 125 120 Conical
440391 180 40 Conical
440392 180 60 Conical
440392A 180 80 Conical
440392B 180 120 Conical
Flap disc CO-COOL SG STEELOX (performance range)
POLIFAN flap disc with particulary cool grinding for materials that are difficult to machine such as high-alloy
and rust-resistant steel, nickel-based alloys or titanium alloys.
The self sharpening action of the ceramic oxide grain guarantees optimal results, even on materials
that are difficult to machine. Less heat build-up in the workpiece compared with other flap discs.
For surface grinding, weld dressing, chamfering, deburring.
Very suitabel on stainless steel (INOX), Inconel,
Hastelloy and hard aluminium alloys.
Number Diameter Grit size Shape
440329 115 40 Flat
440330 115 60 Flat
440331 125 40 Flat
440332 125 60 Flat
440333 180 40 Flat
44-04.1
Nummer Diameter Korund Vorm
440334 115 40 Conical
440335 115 60 Conical
440336 125 40 Conical
440337 125 60 Conical
440338 180 40 Conical
Flap disc CO-FREEZE SG INOX (performance range)
POLIFAN flap disc specifically developed for stainless steel (INOX) with ultra-cool grinding.
Due to the ceramic oxide grain CO with active grinding and cooling special coating (FREEZE),
there is no discolouration (even in thermally unfavourable conditions), so no reworking
is required. Fewer tool changes due to excellent tool life.
Maximum aggressiveness over the entire tool life.
The usual flying sparks are minimized. Damage to stainless steel workpieces from flying
glowing sparks is therefore almost entirely ruled out.
The FREEZE coating significantly reduces heat build-up in the workpiece compare with standard
flap discs.
Applications: Surface grinding and weld dressing.
Number Diameter Grit size Shape
440480 115 36 Flat
440481 115 50 Flat
440482 115 80 Flat
440483 125 36 Flat
440484 125 50 Flat
440485 125 80 Flat
Number Diameter Grit size Shape
440486 115 36 Conical
440487 115 50 Conical
440488 115 80 Conical
440489 125 36 Conical
440490 125 50 Conical
440491 125 80 Conical
440492 180 36 Conical
440493 180 50 Conical
Flap disc A PSF STEELOX (universal range)
Aluminium oxide abrasive. High stock removal rate and long tool life.
For surface grinding and edge grinding with angle grinder of all power outputs.
For steel, stainless steel, plastics and wood.
Achieves very good grinding results even at low contact pressure.
Number Diameter Grit size Shape
440393 115 40 Flat
440394 115 60 Flat
440395 115 80 Flat
440396 115 120 Flat
440397 125 40 Flat
440398 125 60 Flat
440399 125 80 Flat
440400 125 120 Flat
440401 180 40 Flat
44-04.2
Number Diameter Grit size Shape
440403 115 40 Conical
440404 115 60 Conical
440405 115 80 Conical
440406 115 120 Conical
440407 125 40 Conical
440408 125 60 Conical
440409 125 80 Conical
440410 125 120 Conical
440411 180 40 Conical
440412 180 60 Conical
Flap disc Z PSF STEELOX (universal range)
Zircona alumina Z abrasive for steel and stainless steel (INOX).
For surface grinding, weld grinding and edge grinding.
Optimum stock removal rates are achieved with high-powered angle grinders used at higher
application pressures.
Number Diameter Grit size Shape
440413 115 40 Flat
440414 115 60 Flat
440415 115 80 Flat
440416 125 40 Flat
440417 125 60 Flat
440418 125 80 Flat
440419 180 40 Flat
440420 180 60 Flat
Number Diameter Grit size Shape
440421 115 40 Conical
440422 115 60 Conical
440423 115 80 Conical
440423B 115 120 Conical
440424 125 40 Conical
440425 125 60 Conical
440426 125 80 Conical
440426B 125 120 Conical
4404261 150 40 Conical
4404262 150 60 Conical
440427 180 40 Conical
440428 180 60 Conical
440429 180 80 Conical
4404291 180 120 Conical
Flap disc Z SGP STRONG STEEL (special range)
The innovative POLIFAN-STRONG flap disc is an unique tool with a particularly high performance level.
Due to its patented design, it offers significantly higher efficiency compared to conventional flap discs.
Fast grinding through constant grinding aggressivenness down to the last abrasive grit.
Ultimate economic efficiency thanks to maximum stock removal per time unit and less wear on discs.
Extreme long tool life gives less tool change.
Abrasive: Zirconia alumina Z.
Applications: weld dressing, chamfering and deburring.
Grit size 36 is ideal for a high stock removal rate,
e.g. during work on weld seams.
Grit size 50 is ideal for work on edges, e.g.
chamfering or for producing a fine finish.
Number Diameter Grit size Shape
440460 115 36 Conical
440461 115 50 Conical
440462 125 36 Conical
440463 125 50 Conical
440464 180 36 Conical
440465 180 50 Conical
44-04.3
Flap disc CO Freeze SGP STRONG INOX (special range)
Special POLIFAN flap disc combining the patented STRONG design and its long, compact flaps with an innovative abrasive.
Due to the ceramic oxide grain CO with active grinding and cooling special coating (FREEZE), there is no discolouration
(even in thermally unfavourable conditions), so no reworking is required.
The self-sharpening action of the ceramic oxide grain, together with the active grinding FREEZE special coating
enables ultra-cool grinding and minimizes heat build-up on materials which do not conduct heat
well, such as stainless steel (INOX).
Flying sparks are minimized. Damage to stainless steel workpieces from flying glowing sparks is
therefore almost entirely ruled out.
Applications: weld dressing, surface grinding.
Grit size 36 is ideal for a high stock removal rate,
e.g. during work on weld seams.
Grit size 50 is ideal for work on edges, e.g.
chamfering or for producing a fine finish.
Number Diameter Grit size Shape
440620 115 36 Conical
440621 115 50 Conical
440622 125 36 Conical
440623 125 50 Conical
Flap Disc Z SGP Curve STEELOX (special range)
The patented flap disc POLIFAN-CURVE has been specially developed for working in fillet welds.
It is the only flap disc in the world that has flaps on both the grinding side and the rear side, as well as on the radius.
High stock removal rate ensures fast work progress and therefore significant wage cost savings.
Outstanding tool life when working on fillet welds. Precise and optimum grinding of the fillet weld geometry.
Shape M for fillet weld radii > 5 mm
Shape L for fillet weld radii > 8 mm
Number Diameter Grit size Shape
440430 115 40 M
440431 115 40 L
440440 125 40 M
440441 125 40 L
440442 150 40 M
440443 150 40 L
440444 180 40 L
44-04.4
,
Flap disc CO SGP Curve STEELOX (special range)
Ceramic oxide grain CO for stainless steel (INOX) and steel.
For V-shape edges grinding. Special design with flaps wrapped around the disc.(PFR)
For very labor intensive grinding jobs in edges.
Grinding of V-shaped seams, edges.
Ensures low build-up of heat in the work piece when used with minimum contact pressure on
Variable speed angle grinders at low RPM levels. No thermal material damaging.
Shape M for fillet weld radii > 5 mm
Shape L for fillet weld radii > 8 mm
Number Diameter Grit size Shape
440445 115 60 M
440446 115 60 L
440448 125 60 M
440449 125 60 L
Flap disc A SGP Curve ALU (special range)
Aluminium oxide A with active grinding, cooling coating for Aluminium.
For V-shape edges grinding. Special design with flaps wrapped around the disc.(PFR)
For very labor intensive grinding jobs in edges.
Grinding of V-shaped seams, edges.
Specially formulated for non-loading grinding performance on soft, greasy grades of aluminium. Contains no fillers that
might leave undesirable residues on the workpiece. The ground surface can be welded right away, without any further
treatment. Ideal for soft aluminium and suitable for medium aluminium.
Shape L for fillet weld radii > 8 mm
Number Diameter Grit size Shape
440650 115 40 L
440651 125 40 L
44-04.5
Non Woven Flap Disc POLINOX ® PNL
The Non-wove abrasive flaps are stuck to a glass-fabric backing pad, meaning that the discs can be used face down.
Along tool life is achieved through the dense packing of the flaps.
The tool is designed for working on large surfaces with speed-adjustable angle grinders.
Also very useful on cordless angle grinders.
Abrasive: Aluminiumoxide A
Number Diameter Grit size Shape
440600 115 100 Flat
440601 115 180 Flat
440602 115 280 Flat
440603 125 100 Flat
440604 125 180 Flat
440605 125 280 Flat
Non Woven Flap Disc POLINOX ® PNZ
The Non-woven and abrasive-cloth flaps are stuck to a glass-fabric, meaning that the disc can be used face-down on
large surfaces.
A long tool life is achieved through the dense packing of the flaps.
The tool is designed for working on large surfaces with speed-adjustable angle grinders.
Also very useful on cordless angle grinders.
Abrasive: Aluminiumoxide A
Number Diameter Grit size Shape
440610 115 100 Flat
440611 115 180 Flat
440612 125 100 Flat
440613 125 180 Flat
POLICLEAN discs PLCD + PLCD PLUS
The non woven cleaning material is glued onto a glass-fabric base.
This makes the POLICLEAN discs suitable for use in face down grinding.
For coarse cleaning work such as removing paint, scale, heat discolouration,
rust and adhesive residues.
POLICLEAN-PLUS discs (blue) exhibit a high stock removal rate
with a very long tool life
Preferably for use on slow-running angle grinders.
For the best result use at recommended cutting speed
of 30-35 m/s.
For angle grinders and cordless angle grinders.
Number Diameter Grit size Shape
920510 115 PLCD Flat
920511 125 PLCD Flat
Number Diameter Grit size Shape
920512 100 PLUS Flat
920513 115 PLUS Flat
920514 125 PLUS Flat
44-04.6