SHAW HD BOXINSTALLATION INSTRUCTIONS(Approx. Hardware Setup Time: 10-15 Minutes)

STEP 1 | DO YOU HAVE EVERYTHING?The following components are included in the package that your HD box came in:

Cable Cord (Coax) Power Pack HDMI Cable IR Receiver + Tether Cord (Optional Use)

Shaw Remote Motorola HD Box

STEP 2 | TIME TO HOOK UP YOUR NEW HARDWARE.B. Find a location to put your new hardware that will allow

it to breathe.

C. Screw one end of the included white cable cord (with silver ends) in to your wall cable outlet and the other end in to CABLE IN on the back of the HD box. For an optimal viewing experience, we recommend using the included cable cord instead of any others that you might have around.

A. Your serial number, “Host SN,” is located on the back of the HD box (next to the number 3) and starts with the letter “M”. Alternatively, you can � nd the serial number on the white sticker labeled “S/N” on the HD box packaging.

Before you hook up your HD box, write your serial number below. You will need it when you contact us to activate your new hardware.

Serial Number:

Wall Outlet

Cable InCable Out

D. Connect the included HDMI cable (black cable with � at gold ends) from the HD box to your TV. Both video and audio travel through HDMI cable. Note the input you plug your HDMI cable in to on the back of your TV (i.e. HDMI 1, HDMI 2, etc.). For more advanced audio/video setups, please refer to the manufacturers guide included with your HD box.

E. Connect the included power adapter from the wall power outlet to the HD box.

HDMI Out

HDMI In

Television

Power Pack

STEP 3 | NOW WE JUST NEED TO GET YOUR BOX ACTIVATED.A. Turn on your HD box by pressing the power button on the front of the box. After a couple of seconds the blue

power indicator will light up to con� rm the box has power. The display on the front of your HD box may display multiple messages once it is powered on, this is normal.

B. Tune your TV to the High De� nition (HD) input (i.e. HDMI 1, HDMI 2, etc.) that you plugged the HD box into instep 2-D. You may see a blue box appear on your TV, this is normal.

C. Activate your HD box by calling us at 1.888.270.2433. Make sure you have the serial number of your new equipment ready.

D. The IR Receiver can be plugged in to EXT IR IN on the back of the HD box if you wish to place your HD box out of sight (i.e. in a cabinet). The IR Receiver should be placed somewhere that your remote will have a clear line of sight to.

E. To program your Shaw remote to work with your TV (adjust volume etc.), follow the “Quick Setup” instructions on the reverse of the remote or visit www.urcsupport.com/shaw.

Once you’re all set up, watch a quick video that highlights the exciting features of your new guide. To access, press the MENU button on your remote and select “Help”.

Power IndicatorPower Button

HD_INSTALL_AUG12