Upload
lester-publications
View
265
Download
13
Embed Size (px)
DESCRIPTION
The official publication of the Sheet Metal Contractors Association of Alberta March 2016 | PREMIERE EDITION
Citation preview
the official publication of the sheet metal contractors association of alberta March 2016 | PREMIERE EDITION
PLUS
PROMPT PAYMENTWorking towards the unified goal of enforcing payment regulation
SMCAA SCHOLARSHIP FUNDHelping the industry move forward
CAREERS: The Next Generation
Sheet Metal Contractors Association of Alberta
FL24
0 10
15 E
&O
E
When You Need Quality Commercial Product......remember the name that’s been trusted for more than fifty years.
11415 184 St NW, Edmonton, AB T5S 0H1 Phone: 780-479-1946 | Toll Free: 1-800-330-3226 Order Desk Fax: 780-474-5403 Office Fax: 780-474-8500
8507 McIntyre Rd, Edmonton, AB T6E 6G3 Phone: 780-408-5496 | Fax: 780-408-5499 Toll Free: 1-866-643-3226
#11-11150 38th St SE, Calgary, AB T2C 2Z6 Phone: 403-259-4344 Fax: 403-259-2772 Toll Free: 1-800-340-3226
1145 65th Ave NE, Calgary, AB T2E 8T9 Phone: 403-295-4234 Fax: 403-295-4220
Contact your local ECCO Supply™ sales representative for more information.
Providing Complete HVAC Solutionsincluding residential, commercial, industrial and institutional estimating, plan and spec, and custom metal fabrication.
Fully Trained, Knowledgeable Staffready to assist you with product information, recommendations and complete estimates on sheet metal and equipment.
www.eccosupply.ca
Proud supporter of
SMCAA
Sheet Metal Contractors Association of Alberta
2725 12 St. NE, #203
Calgary, AB T2E 7J2
403-250-7040
www.smcaa.ca
Provincial President Provincial Vice-President
Past President Provincial TreasurerExecutive Director
Directors
Gary BianchiniTony Borsje Ken FulmerBrock GrollaWilma AgnewBob DoerksenCollin GoodyearFrank GraumannRob HayArron PetersonLee StrauseJay Langejans
© 2016 SMCAA – All rights reserved. The contents of this publication may not be
reproduced, in whole or in part, without the prior written consent of SMCAA.
Disclaimer: The opinions expressed by the authors and/or editorial sources contained
in Sheet Metal Works are those of the respective parties and do not necessarily represent the opinion of the Sheet Metal
Contractors Association of Alberta
Design & Layout
701 Henry Ave.Winnipeg, MB R3E 1T9Phone: 204-953-2189
Fax: 204-953-2184www.lestercommunications.ca
3 President’s Message
4 Executive Director’s Message
5 A Message from Honourable Rachel Notley
6 A Message from Mayor Naheed Nenshi
7 A Message from His Worship Mayor Don Iveson
8 Board of Directors
9 CAREERS: The Next Generation
10 SMCAA Scholarship Fund
13 Prompt Payment Legislation
14 Sheet Metal Training Evolves at SAIT Polytechnic
16 SMCAA Calgary Scholarship Golf Classic
18 Nu-Trend Industries Inc.
19 SMCAA 2016 Members
25 SMCAA Edmonton Scholarship Golf Classic
26 Calendar Of Events – 2016
28 Northern Alberta Institute of Technology (NAIT)
CONTENTSMARCH 2016
2 March 2016 • www.smcaa.ca
Making Our Industry Better
Sheet Metal Contractors Association of Alberta
As president of the Sheet Metal Contractors Asso-ciation of Alberta, I am delighted to introduce our Sheet Metal Works magazine to you. Our new publication will be a wonderful source of informa-
tion to all participants in the HVAC industry in Alberta. To support SMCAA’s mission of supporting our contractor, supplier and manufacturer members, this publication will report on the challenges facing our industry today and focus on the needs of our members in the future.
We will provide a feature story on our scholarship pro-gram for apprentices of our member companies, as well as com-ments from many of our grateful recipients. Additionally, we will update the membership with news about our involvement with the Alberta Trade Contractor’s Coalition (ATCC) and the work we are doing to pass prompt payment legislation. We will also provide news from related industry associations like Alberta’s construction and contractor’s associations, safety councils and
apprenticeship committees. SMCAA is very excited to report our recent move towards developing representation for an HVAC Technical Council on the Building Technical Council. In our com-mittee news updates, members will be informed of our Sheet Met-al Showcases with CAREERS: The Next Generation in Edmonton, Calgary and Red Deer for students and parents promoting careers in the HVAC industry. Further information regarding the educa-tional seminars we offer each year through SMACNA will be listed as well. Networking is such an important part of industry, so we provide a calendar of upcoming social events for members.
I believe that Sheet Metal Works will serve as an excellent ve-hicle to further our mandate to inform, build, support, promote and educate Alberta’ssheet metal and HVAC industry. Together, let’s make our industry better!
Gary Bianchini President, SMCAA ❖
Sari
ON
eal /
Shu
tter
stoc
k.co
m
PRESIDENT’S MESSAGE
Gary Bianchini, Provincial President, SMCAA
SMCAA • Sheet Metal Works 3
Welcome to the first edition of Sheet Metal Works for the Sheet Metal Contractors Association of Alber-ta (SMCAA). We are very pleased and excited to share this with our membership and with contrac-
tors, suppliers, wholesalers and manufacturers in the HVAC in-dustry who we feel need to be a part of this growing organization. We hope that you find the information that we have provided of interest to your business in Alberta. As an association, we believe that there is strength in numbers. Membership with SMCAA is important as it provides the industry with a voice that is being heard throughout the province.
I have proudly been a part of the SMCAA since March 2000 and have been the executive director for the past 10 years. I’ve seen a lot of maturity within the organization and seen how it has grown from the amalgamation of two organizations, the Cal-gary Air Conditioning and Sheet Metal Association (CASMA) and the Edmonton Association of Sheet Metal and Air Condi-tioning Contractors (EASMAC) in December 2000.
The SMCAA is currently working on many projects to bet-ter our industry, one being our partnership with the Alberta Trade Contractors Coalition to get prompt payment legislation
passed in Alberta. This is an ongoing effort and one that will continue to be forefront for our association. As an association, we have assembled a committee to address the province and the need for our own HVAC Technical Council on the Building Technical Council. This is a long process but we believe that this is long overdue and we know we have the support of many mu-nicipalities and industry.
We continue to promote the sheet metal industry annual-ly at career fairs throughout Calgary and Edmonton. We have also partnered with CAREERS: The Next Generation to host the Sheet Metal Draft Program to introduce high school students to our amazing trade. This year is no different and we will be host-ing the Draft Pick once again in May and we will be partnering with both SAIT and NAIT!
We hope that as you read through Sheet Metal Works you will see for yourself what SMCAA is about and what we are do-ing, and that it will inspire you to become a member of this im-portant organization.
Wilma Agnew Executive Director, SMCAA ❖
raco
rn /
Shu
tter
stoc
k.co
m
EXECUTIVE DIRECTOR’S MESSAGE
A New PageWilma Agnew,
Executive Director, SMCAA
Sheet Metal Contractors Association of Alberta
4 March 2016 • www.smcaa.ca
Premier of Alberta
Office of the Premier. 307 Legislature Building, Edmonton, Alberta, Canada, T5K 2B6
On behalf of the Government of Alberta, it is my pleasure to congratulate the Sheet Metal Contractors Association of Alberta on their inaugural publication.
Trade publications are an essential component of any industry. They act as a trusted source for knowledge, provide networking opportunities and help industry members reach their full potential.
Creating an outstanding trade publication is no easy feat. Thank you for your hard work and dedication to improving Alberta’s sheet metal industry.
Rachel NotleyAugust 2015
A Message from Honourable Rachel Notley, Premier of Alberta
SMCAA • Sheet Metal Works 5
OFFICE OF THE MAYOR
On behalf of my City Council colleagues and the citizens of Calgary, I am pleased to bring greetings to all of you reading the inaugural Sheet Metal Works publication.
The members of the Sheet Metal Contractors Association of Alberta (SMCAA) play an important role in building our city, and our province. It is crucial that we have skilled people to build and maintain HVAC systems in our residential, commercial and industrial buildings.
I commend the SMCAA for their dedication to improving professional standards and ensuring the safety of sheet metal workers in Alberta. Thank you for all your hard work, and congratulations on your first edition of Sheet Metal Works.
Sincerely,
Naheed K. Nenshi Mayor
January 2016
A Message from Mayor Nenshi
6 March 2016 • www.smcaa.ca
On behalf of City Council and the people of Edmonton, Alberta’s Capital City, I extend warm greetings to readers of the premiere trade publication for the Sheet Metal Contractors Association of Alberta.
Edmonton is currently undergoing a historic transformation. Our skyline is dotted with dozens of cranes, with new buildings taking shape every day, transforming our city into a global hub. Skilled sheet metal workers install and maintain HVAC systems in these structures, ensuring they remain safe and healthy. This is vital to building our urban, rural, industrial and commercial environment.
I thank the Sheet Metal Contractors Association of Alberta for playing an active role in maintaining the safety and well-being of sheet metal workers throughout the province and for helping to build Edmonton into a great city.
Congratulations on your first publication!Yours truly,
Don Iveson Mayor
A Message from His Worship Mayor Don Iveson
SMCAA • Sheet Metal Works 7
BOARD OF DIRECTORS
Sheet Metal Contractors Association of Alberta
Board of Directors:
Directors:
Gary Bianchini Provincial President 2015/16
403-252-0132 [email protected]
Ken Fulmer Past President 2015/16
780-469-7791 [email protected]
Tony Borsje Provincial Vice-President 2015/16
780-452-2008 [email protected]
Wilma Agnew Executive Director 403-250-7040
Brock Grolla Provincial Treasurer 2015/16
403-255-7535 Ext. 203 [email protected]
Rob Hay 2015/16
403-279-1983 [email protected]
Lee Strause 2016/17 New
780-469-0491 [email protected]
Frank Graumann 2015/16
780-463-3096 [email protected]
Bob Doerksen 2015/16
403-259-2888 [email protected]
Aaron Peterson 2015/16
780-371-7022 [email protected]
Jay Langejans 2016/17 New
403-735-0770 [email protected]
Collin Goodyear 2015/15
780-430-4385 [email protected]
8 March 2016 • www.smcaa.ca
Dan Olesen, Field Director, CAREERS: The Next Generation
CAREERS: The Next Generation is a student- focused industry, government and community partnership committed to enabling youth on their path to rewarding careers. Since 1997, more than 24,000 students have connected learning to earning through paid internships with the support of CA-REERS and the Registered Apprenticeship Program (RAP).
In my role as a field director for CAREERS in Calgary, I connect high school students and employers to help students de-velop necessary skills in the trades and indus-trial technologies. Through our link with the Sheet Metal Contractors Association of Alberta (SMCAA), students are able to explore a career as a sheet metal worker by participating in RAP. Linking high school students with the sheet metal industry, students can earn credits toward high school courses, logging 1,000 hours of on-the-job training while still in school.
CAREERS and SMCAA hosted the first sheet metal showcases in Calgary and Edmonton in 2014. Students and their parents toured a shop and spoke with instructors, journeymen and industry leaders and to learn about the job requirements, explore ca-reer opportunities and training. More than 31 stu-dents went on to explore sheet metal careers through a RAP internship (an increase from only seven in 2013). The event has grown into an annual event, and we look forward to our third showcase in 2016.
In May 2015, Draven M., a female student from Bishop Gran-din High School, was initially interested in welding, and attended the SMCAA showcase to explore options. Changing interests, she started as a RAP sheet metal intern in July 2015. She admits that her first day as a sheet metal worker was hard, but “I have learned so much about construction and the importance of PPE on the work site,” she says. She is proud of her position and she couldn’t be happier, work-ing as hard as she can to be an efficient and safe worker. Teachers have commented on the growth of these students both in and out of the classroom, saying the students are emerging with an enthusiasm, confidence and determination they have never seen before. Employ-ers agreed that the events made it easier and more fun to participate – recognizing that they are not just supporting youth career develop-ment, but they are also supporting their industry.
To better prepare Alberta for the road ahead, we have to show students a future worth working for. The sheet metal industry is still too unfamiliar to students, parents and teachers. SMCAA and CA-REERS are working together to “heat things up” to attract, engage and retain the next generation of local talent, and to promote the industry as a viable career choice for new generations. ❖
CAREERS: THE NEXT GENERATION
SMCAA • Sheet Metal Works 9
Scholarship Fund
I n 2014, SMCAA honoured four very deserving recipients with scholarships of $500 each to help defray out-of-pocket expenses while attending classes. In a continuing effort to promote Alberta’s sheet metal in-
dustry and help those individuals who want to achieve their apprenticeship as a sheet metal worker, the SMCAA honoured eight very worthy individuals with scholarships of $500 each in 2015.
Awarded to employees of SMCAA member companies, the scholarships are making the goals of the province’s future sheet metal workers a little more accessible.
“The scholarship funds are there to support the apprentic-es who have attended and passed the required curriculum,” ex-plains Tyler Bungay, who, as chair of the SMCAA Scholarship Fund Committee, presides over all committee meetings and en-sures the integrity of the selection process remains intact.
“The intent is that the funds received will help to subsidize a portion of the out-of-pocket expenses that may have occurred while the recipients were attending classes. Most apprentices will have government assistance, but it will not typically cover the loss of a full paycheque.”
It was in 2013 that SMCAA had the vision to start a scholar-ship program, recalls SMCAA’s executive director, Wilma Agnew.
“We sought a way to support our future workforce, promote our ever-growing industry, as well as provide a direct benefit to our member companies.”
Adds Bungay, “Our industry is awesome. There’s a lot of po-tential and great people, so it’s very important to keep growing and engaging young people to come into our industry.”
He says many sheet metal contractors are getting older and will be retiring in the next 10 years.
“So it’s about trying to capture those young people to come into our industry in lieu of another trade or working in another industry. There are lot of trades vying for the same percentage of people. When they do come, we want to support them so they don’t want to leave.”
Scholarship cheque presentation to Matt Batten of Alggin, Calgary
Cheque presentation to Nathan Crier by Gary Bianchini, provincial president and Tony Borsje, vice president of SMCAA
Helping the industry move forward
10 March 2016 • www.smcaa.ca
When asked why someone should choose to become a sheet metal worker, as opposed to another trade, Bungay pauses before answering.
“That is a hard question to answer,” he says. “I think any job in the trades is a good career move. The good news about sheet metal workers is that we are paid fairly well by industry standards. We typically work indoors and there is a lot of op-portunity. Your percentage of getting hired on in the sheet metal industry is typically higher than other trades because there are less people applying for these jobs.”
Scholarship CriteriaApplicants for the SMCAA Scholarship Fund are required to meet the following criteria in order to be considered:• Must be currently (at the time of submission and award)
employed by a member company in good standing with SMCAA.
• The member company must submit the application and a letter of recommendation on applicant’s behalf.
• The applicant must have attended the sheet metal apprenticeship training and passed all provincial requirements set out in the Alberta Apprenticeship Program.
• A copy of the applicant’s transcript must be included with the application.
• The applicant must have been enrolled in the apprenticeship training program, in any of the intakes between April 2015 and February 2016.
• All applications must be submitted to SMCAA by the May 02, 2016 deadline.
• All applications must be complete. Incomplete applications will be removed from the selection process.
Scholarship recipients are chosen by the committee based on their marks and recommendation by their employer. (The 2016 scholarship applications were emailed out to membership on March 2, 2016, applications are also available on our website www.smcaa.ca) This year SMCAA is proud to offer 10 $500.00 scholarships for the 2016 intake.
In 2014, there were 13 applicants from which four recipients received $500 scholarships. In 2015, there were 11 applicants from which eight recipients were chosen.
Cheque presentation to Jessie Andrais by Gary Bianchini, provincial president and Tony Borsje, vice president of SMCAA
CommercialHeating and Ventilation
Since 1984
7798 – 16 StreetEdmonton, AB
T6P 1L9P: 780-469-7791F: 780-469-1932
Our industry is awesome. There’s a lot of potential
and great people.
SCHOLARSHIP FUND
SMCAA • Sheet Metal Works 11
Other Trade ScholarshipsIn addition to the SMCAA Scholarship Fund, the association is also involved with the Alberta Industry Training Scholarships Program. Providing nearly 400 annual scholarships of $1,000 each, these are open to individuals across Al-berta who are not just involved in the sheet metal industry—but other trades as well.
This program is co-sponsored by the Alberta Apprenticeship and Industry Training Board, private industry and Al-berta Innovation and Advanced Educa-tion. “This scholarship is separate from our association’s annual one; however it is still important to address it,” says Ag-new. “This is open to everyone in the sheet metal industry whether they are a member or not. But we have no control over who receives this one.”
She adds that the Alberta Industry Training, Apprenticeship Scholarship Committee (“ASC”) had set out to raise $1 million by March 31, 2002.
“Achieving this goal allowed them to benefit from the government’s offer to match industry donations for apprentice scholarships with a $2 million contri-bution. Because our association raised $10,000, we have a scholarship in the as-sociation’s name every year.”
In 2002, donations were adminis-tered by the Alberta Heritage Scholarship Fund (AHSF). All scholarship funds were invested as part of the AHSF in a diversi-fied portfolio and the interest earned on funds in an endowment is reinvested in that endowment.
“This scholarship is completely run by the ASC, but anyone in industry can apply for the scholarship, whether they are a SMCAA member or not,” says Ag-new. Scholarships are awarded on the ba-sis of marks, employer recommendation and financial need. This scholarship of $1,000 is awarded annually on behalf of the SMCAA.” ❖
Scholarship cheque presentation to Rory Frizzell of K.B. Heating, Lethbridge
“I am writing to thank you for your gener-ous $500 SMCAA scholarship. I was very happy and appreciative to learn that I was selected as the recipient of your scholar-ship. I’m a fourth year sheet metal worker, currently working for McMullen’s Refriger-ation and heating and loving it.
By awarding me the SMCAA scholarship, you have lightened my financial burden which allows me to focus more on the most important aspect of school—learning. Your generosity has inspired me to help others and give back to the community. I hope one day I will be able to help students achieve their goals just as you have helped me.”–Nathan Crier
I applied for the scholarship because my marks were good and I thought I had a good chance at receiving the scholarship. The $500 scholarship grant helped pay out some of the every days costs of going to school like transit, supplies, etc. I will high-ly recommend other apprentices to apply. Every little bit helps when you are a stu-dent. And it makes you feel recognized for a job well done.”– Matthew Batten, Sheet Metal Journey-man (Fourth Year when he applied for the scholarship)
“There are a variety of grants out there that apprentices should be taking advan-tage of. Money came at a great time as it helped with the costs of school and getting new furniture at home. Finished school.–Wes Capton
“It’s a great feeling to be recognized in your field of work. The scholarship was a great reward for me and helped with the cost of school. The golf tournament was a great chance to meet some awesome people and have a fun time. Still in school.– Rory Frizzel
“Thank you SMCAA, for the $500 Schol-arship award. With it I was able to recover the costs of my books and supplies needed for my first year at NAIT. I am currently still employed at Vet’s Sheet Metal (and love working there!), and considering how and when I might do my second year of school. Every bit of financial aid helps out!– Lorrine Baillie
For an application, email [email protected] or call:Phone: 403-250-7040 or Toll Free: 1-888-265-6665.
SCHOLARSHIP FUND
SHOP ONLINEwolseleyexpress.com
Wolseley Canada is the country’s leading national distributor of plumbing, hydronic, HVAC/R and PVF products and solutions to professional contractors, retailers, and industrial users.
Our associates have proven industry expertise and can provide the resources and products you need at over 220 branches across Canada.
National reach for products when and where you need them.
anytime anywhere24/7 AFTER HOURS SERVICE
AROUND THE CORNER, COAST-TO-COAST
Wolseley-HVAC_4x3_FINAL_HR.pdf 3 2015-06-26 3:00 PM
12 March 2016 • www.smcaa.ca
Prompt PaymentBy Simone Abrahamsohn
In a collective effort to make prompt payment in the construction industry the priority that it deserves to be, 10 Alberta trade contractor associations
have banded together in the hope that re-sults will be achieved through strength in numbers.
Working towards the unified goal of enforcing payment regulation, i.e., 30 days after the invoice date (and not – as has become frustratingly common – pay-ment three to six months after receipt of invoices), the Alberta Trade Contractors Coalition (ATCC) was formed with the participation of the Sheet Metal Contrac-tors Association of Alberta (SMCAA) in partnership with the Mechanical Con-tractors Association (MCAA), Electri-cal Contractors Association of Alberta (ECAA), Alberta Roofing Contractors Association (ARCA), Provincial Glaziers Association of Alberta (PGAA), Mason-ry Contractors Association of Alberta (MCA), Thermal Insulation Association of Alberta (TIAA), Heating Refrigeration & Air Conditioning Contractors of Cana-da (HRAI), Alberta Wall and Ceiling As-sociation (AWCA) and the Canadian Au-tomatic Sprinkler Association (CASA).
The mandate of the ATCC ensures that each member will participate in the development of ATCC strategies, poli-cies and position statements required to pursue the adoption of Prompt Payment Legislation by the Government of Alber-ta. The required actions include: devel-oping clear messaging around the need
for Prompt Payment Legislation in the industry, establishing group statements to be presented to applicable government departments in order to achieve imple-mentation of Prompt Payment Legisla-tion, and developing an effective strategy (including key contacts, measurable ob-jectives and outcomes) for realizing the collective goal.
A study by the firm Raymond Chabot Grant Thornton (RCGT) states that in the construction industry, the sec-tors with the highest percentage of cus-tomer accounts receivable over 120 days are those of the civil engineering and roads and the institutional setting. Cus-tomers in these areas are mainly in the public sector. Late payments often hurt small and medium-sized businesses who don’t always have as much credit accessi-bility, and may be at risk of experiencing financial difficulty.
In May 2013, the Ontario Legislature passed Bill 69, The Prompt Payment Act, through seconded reading whereupon it was sent for review by Standing Commit-tee. Bill 69 subsequently died on the floor later that fall as the minority government that supported the Bill was prorogued for an election. Learning from what trans-pired in Ontario, the ATCC is actively pursuing a broader coalition with a man-date to seek solutions to diminish the use of unjustified delayed payment practices and eliminate the negative impact they have on all construction industry stake-holders.
In a random survey conducted by the ATCC, 86 per cent of companies sur-veyed said late payments were a moderate or serious prompt payment problem. In 2014, the average amount of outstanding payments for accounts over 60 days due was $223,819.92 (with average gross sales of companies being $6,866,426.42, pre-dominantly from private accounts).
Some potential solutions to decrease payment times include increased commu-nication with company owners to ensure the money is available and establishing clear regulations on the maximum time between job completion and payment. Additionally, increasing the consequenc-es for late payments, i.e., adding interest to the delayed transparency in the pay-ment process between owners and gen-eral contracters and possibly a public list of owners/contractors that have violated payment terms.
Moving forward, the coalition is seeking a better balance in the construc-tion industry and more accountability among all sectors within the industry for prompt payment of contracted services that have been delivered. Right now, those who deliver contracted services have little protection and very few rights when they attempt to collect payment for services rendered. Ideally, Alberta trade contrac-tors will have late payments prevented rather than needing to rely on post-hoc solutions so that both owners and general contractors will be satisfied, and we can keep Alberta building. ❖ B
rian
A J
acks
on /
Shu
tter
stoc
k.co
m
PROMPT PAYMENT
What You Need to Know About
Legislation
SMCAA • Sheet Metal Works 13
Sheet metal training evolves at SAIT Polytechnic
When SAIT Polytechnic opened its doors in 1916 as the Provincial Institute of Technology and Art, metal working was one of just two inaugural programs.
One hundred years later, sheet metal training continues to be a program in demand. SAIT has offered the provincial ap-prenticeship program in that trade since 1950. Last year, 340 apprentices were enrolled across all four periods of sheet metal worker training.
And the year ahead will see some exciting new advanc-es, says Duane Sylvester, Academic Chair for HVAC Trades in SAIT’s School of Construction.
“The course outline for sheet metal worker apprenticeship training has been revamped at the recommendation of the Pro-vincial Advisory Committee, and by September 2016 all three
schools offering the training — SAIT, NAIT and Grande Prairie Regional College — will be delivering the new curriculum,” says Sylvester.
The biggest change is the addition of a complete HVAC in-stallation section in each training period, Sylvester explains. In Period One, apprentices will do a complete furnace installation for a residential project. Periods Two, Three and Four focus on HVAC installations for light commercial, larger commercial and industrial duct systems, respectively.
“These additions of a whole installation — not just pieces — in each period of training reflect what employers have told the Provincial Advisory Committee they are looking for,” Sylvester says. “This will improve outcomes for industry.”
The course outline also reflects a switch to competency-based learning.
Cha
se C
laus
en /
Shu
tter
stoc
k.co
m
14 March 2016 • www.smcaa.ca
In the new competency-based model, where a Period One outcome is “install residential duct systems,” the apprentice must demonstrate proficiency in reading and interpreting building drawings, applying specification and code requirements for the installation. Students then field measure the fittings required, complete layout for the fittings, manufacture them, install and then seal and test the system.
Sylvester says the new approach will also better address stu-dents’ needs. “Feedback from students is that the training con-tained aspects they didn’t need. With these changes, the training focuses on what is very relevant. So we’re viewing this as positive from all aspects.”
Training space in the Aldred Centre, part of SAIT’s state-of-the-art Trades and Technology Complex, is being refitted to accommodate the new large-scale installations.
“The facility was built to be flexible and reconfigurable to meet changing needs,” says Sylvester. “From what I’ve seen in other jurisdictions, the labs in the Aldred Centre are some of the best in North America.”
The complex boasts four specialized sheet metal labs — one each for manufacturing, HVAC service, welding and drawing interpretation.
“If someone from the industry hasn’t been at SAIT in a while, they would hardly recognize what we’re doing in the sheet metal program. It’s not your old journeyman training anymore,” says Sylvester.
The pre-employment program offers a new entry route.SAIT will also launch an open-enrolment Pre-employment
Sheet Metal program in March — the only such training in Al-berta. The 15-week program covers the Period One apprentice-ship curriculum as well as some additional hand skills. On suc-cessful completion, students will be eligible to challenge the first year provincial apprenticeship exam.
SAIT previously delivered pre-employment sheet metal training for three years to clients of the Calgary Catholic Immi-gration Society.
“Employer feedback from that program was very positive,” says Sylvester. “What employers really like is that they’re gain-ing entry-level employees who have relevant industry skills. And they see a real commitment to the trade from those who’ve taken the program.”
Supports for employers and trainers Both pre-employment and apprenticeship sheet metal training qualify for funding support to employers under the Canada-Alberta Job Grant program.
Financial assistance is also available directly to ap-prentices and pre-employment students.
SAIT offers comprehensive study skills and learning strategies services tailored to the needs of trades students, as well as online math and technical reading assessments to help prospective students determine their readiness for training. Almost half of first-year apprentices took the Orientation for Apprentices course last August.
Program dates March 14, 2016 marked the start of the 15-week Pre-em-ployment Sheet Metal program. Information sessions are held monthly for prospective students to learn more de-tails.
The next intake for all four periods of Sheet Metal Worker apprenticeship at SAIT is April 18, 2016. ❖
Leve
nt K
onuk
/ S
hutt
erst
ock.
com
ndoe
ljind
oel /
Shu
tter
stoc
k.co
m
“The facility was built to be flexible and reconfigurable to meet changing needs.”
SAIT POLYTECHNIC
SMCAA • Sheet Metal Works 15
#122, 412 53rd Avenue SE Avenue, Calgary, AB T2H 0N4
PH: (403) 516-1966
Universal Ventilation Ltd. provides quality HVAC services to commercial, industrial and residential markets
www.universalventilation.comEmail: [email protected]
Universal Ventilation Ltd.
· COR Certified
· Controls · Dehumidification· Heating Equipment· Make Up Air· High Velocity Systems
· Heat Recovery · Contract Maintenance · Exhaust Systems · Air Conditioning · Sheet Metal Fabrication
HVAC Design, Installation & Service
SMCAA, on June 17, 2015, in Calgary held their Scholarship Golf Classic at the Country Hills Golf Course. Even though it rained all day, it was a great, fun day.
We had two holes-in-one!Congratulations to Gary Bianchini of Alg-gin who won the $10,000 Prostate Cancer Hole In One Contest.
Congratulations also to Harvey Cun-ningham of Goodman Manufacturing for his Hole In One – while his wasn’t on a “sponsored” hole, we congratulate you just the same!
Congratulations to the Scramble Team Winner!
Congratulations to team Alggin on their win with a -9!Team Alggin:Gary BianchiniAlan BianchiniCorey ClaytonTyler Fisher
Calgary Scholarship
Sheet Metal Contractors Association of Alberta
Thank you for all donationsSMCAA would like to thank all the hole sponsors and companies who provided mon-etary donations. A big thank-you to those who purchased the tickets for a chance to win a new set of golf clubs and bag, Mulligans and for participating in the table auctions at lunch. A special thank you again to Trotter & Morton for their $1,000 donation for the Fairmont Gift Card.
The efforts raised $2,525 towards our scholarship program, bringing our funds raised to $19,805 over the past three years! ❖
16 March 2016 • www.smcaa.ca
Congratulations to the Alberta Chapter of the Sheet Metal Contractors Association
on your new publication! Thank you to all those in the industry for your past & future
support!
Visit us at www.cmetals.com
or call 866-379-4995 Calgary
866-962-9006 Edmonton
At Cascadia Metals, Ltd. we strive to be Western Canada’s Service Center of choice. With distribution centers strategically located in British Columbia, Alberta, Saskatchewan and Manitoba, we are fully focused on servicing your flat rolled product needs.
Cascadia Metals offers a wide variety of metal products supported by value-added processes and superior customer service. We specialize in bare and pre-painted 55% aluminum-zinc alloy coated steel (A.K.A. Galvalume®), bare and pre-painted galvanized, resin coated, galvannealed, electrogalvanized, aluminized, cold rolled and hot rolled substrates. In addition, we also carry weathering steel, copper, aluminum, stainless steel and specialty pre-painted products such as prints and textures. And we offer these products in both coil and flat sheet, making Cascadia Metals the one-stop-shop for all of your flat rolled needs.
By carrying large inventories, Cascadia Metals is able to offer next-day delivery on commonly used items, ensuring you get “the right inventory at the right time.” Coupled with our competitive pricing, industry-leading quality and excellent customer service, customers can rest assured they’re getting their money’s worth with each and every order.
Cascadia Metals offers inventory programs for those customers seeking just-in-time delivery. We also offer a skid recycling program to save you time and money (no more sending skids to the dump or paying someone to haul them away).
With our top-of-the-line slitting and cut-to-length capabilities, Cascadia Metals can meet the most rigorous quality and service requirements...quickly, accurately, and consistently with each and every order.
To learn more aboutCascadia Metals, our
products, and ourprocesses, please visit
our website atwww.cmetals.com
For more informationon how we can assist you in growing your business,
please contact us at1-866-962-9006 (Edmonton)
1-866-379-4995 (Calgary)
Ad
vert
oria
l
With trade experience in both the mechanical and construction industry, the owners of Nu-Trend set out to take climate control back to its grassroots, and in 1988 Nu-Trend Industries was created.
Now a leader in the HVAC industry and the wholesale dis-tributor to mechanical and HVAC trades in Canada, the com-pany boasts three offices that serve Western Canada for all cli-mate control needs, from a residential home to large commercial warehouses.
The first sales office, and also the main shipping warehouse and head quarters today, opened in Saskatoon, followed by the Regina sales office and warehouse, and most recently the Calgary sales office was established.
Since the late ‘80s, Nu-Trend has established itself as a lead-er in the HVAC industry, supporting its customers and product lines as they have from the very beginning.
Their relationship with contractors, engineers and manufacturers means that the right equipment is found for the right job. And as a small indepen-dent distributor, their response to customer needs is fast and effective.
Long-term relationships are a specialty of this company with both suppliers and customers. Those who deal with Nu-Trend can be assured that they are dealing with high standards, as all technical representatives are members of, and stay active in, various associations to stay up to date.
They are experts in the trade with technical representatives being factory trained and required to regularly attend product knowledge and training sessions to offer the most up-to-date knowledge and technical expertise. ❖
Their relationship with contractors, engineers
and manufacturers means that the right equipment is found
for the right job.
A Leader in the
HVAC Industry
HVAC INDUSTRY
18 March 2016 • www.smcaa.ca
Sheet Metal Contractors Association of Alberta 2016 Members
SMCAA MEMBERS
A
Accu-Air Technical Services Ltd. Gord Beck 8903 - 68 Street Edmonton, AB T6B 1S4 P: 780-467-1975 F: 780-440-1976 [email protected]
A Degree Above Heating & Air Ltd. Keith Bergen 227 Madeira Close N.E. Calgary, AB T2A 4N7 P: 403-519-4268 F: 403-235-2565 [email protected] www.adegreeabove.com
ABC HVACR Services Ltd. Marlon Hellwig 3215E 16th Avenue North Lethbridge, AB T1H 5E8 P: 403-327-2999 F: 403-327-2985 [email protected] www.lethbridgeheating.com
Action Furnace Gaius Halveron 4086 Ogden Road S.E. Calgary, AB T2G 4P7 P: 403-288-4004 F: 403-287-7718 [email protected] www.actionfurnace.ca
Air Chek Industries Inc. Scott Stone #15, 1430 - 40 Avenue N.E. Calgary, AB T2E 6L1 P: 403-250-5050 F: 403-291-4998 [email protected] www.airchek.net
Airtherm Sales (1998) Ltd. Ralph Gratland 12, 1916B - 30 Avenue N.E. Calgary, AB T2E 7B2 P: 403-571-0060 F: 403-571-0061 [email protected]
Alggin (Calgary) Gary Bianchini 4540 - 46 Avenue S.E. Calgary, AB T2B 3N7 P: 403-252-0132 F: 403-255-9006 [email protected] www.alggin.com
Alggin (Edmonton) Troy Sauter 12110 - 154 Street N.W. Edmonton, AB T5V 1J2 P: 780-424-0132 C: 403-217-1855 [email protected] www.alggin.com
Alggin (Lethbridge) Devon Scriven-Williams #2, 560 - 39 Street North Lethbridge, AB T1H 6Y2 P: 403-320-8732 F: 403-328-8751 [email protected] www.alggin.com
Alpine Heating Ltd. Jack Strause 10333 - 174 Street N.W. Edmonton, AB T5S 1H1 P: 780-469-0491 F: 780-466-3046 [email protected]
AM Agencies Brent Hodder 118, 4029 - 8 Street SE Calgary, AB T2G 3A5 P: 403-243-1161 F: 403-243-1210 [email protected]
Amalgamated Heating Ltd. Richard McNeill 15140 - 128 Avenue Edmonton, AB T5V 1A8 P: 780-482-6838 F: 780-482-6843 [email protected]
Amherst Heating & Ventilation Richard LaChance 119 Maidstone Way NE Calgary, AB T2A 3Y6 P: 403-272-1683 F: 403-208-3844 [email protected]
Aqua Air Systems Ltd. Don Lygo 8703 50 Street Edmonton, AB T6B 1E7 P: 780-465-8011 F: 780-465-8919 [email protected] www.aquaair.ab.ca
Arpi’s Industries Ltd. Mike Kaiser 6815 - 40 Street S.E. Calgary, AB T2C 2W7 P: 403-236-2444 F: 403-236-8345 C: 403-371-8449 [email protected] www.arpis.com
Arpi’s North Inc. Don Grundy 14445 - 123 Avenue Edmonton, AB T5L 2Y1 P: 780-452-2096 F: 780-452-4438 C: 780-906-9065 [email protected] www.arpisnorth.com
ASM Industries Dave Nielsen Bay #1, 2624 - 54th Avenue S.E. Calgary, AB T2C 1R5 P: 403-279-1983 F: 403-279-1982 [email protected]
Aspen Heating & Air Conditioning Ltd. Bob Doerksen 6325 - 11 Street SE, Bay #16 Calgary, AB T2H 2L6 P: 403-259-2888 F: 403-259-5919 [email protected]
Avalanche Air Systems Ltd. Rick Ball 1235C - 40 Avenue N.E. Calgary, AB T2E 6M9 P: 403-278-4567 F: 403-212-1065 [email protected] www.avalancheair.ca
B
BGE Service & Supply Brenda Wellington 6324 - 10 Street S.E. Calgary, AB T2H 2K7 P: 403-243-5941 F: 403-243-3346 C: 403-874-0850 [email protected]
Botting & Associates Alberta Ltd. Curtis Patchin 215-340 Midpark Way SE Calgary, AB T2X 1P1 P: 403-256-6544 F: 403-256-7039 [email protected]
Boyce Heating Ltd. Darcy Revoy #1, 321 - 37 Avenue N.E. Calgary, AB T2E 6P6 P: 403-230-5248 F: 403-277-8826 [email protected] www.bh2006.ca
Brimark Metal Mfg. Ltd. Glenn Schultz 2028 - 2 Avenue S.E. Calgary, AB T2E 6J9 P: 403-272-1418 F: 403-272-1508 [email protected]
Brock White Construction Materials John Kerr 2703 - 61 Avenue S.E. Calgary, AB T2C 4X3 P: 403-287-5889 F: 403-287-5881 C: 403-923-7648 [email protected] www.brockwhite.com
C
Calgary Heating & Cooling Ltd. Darcy Schumann A7 - 624 Beaver Dam Road N.E. Calgary, AB T2K 4W6 P: 403-291-3072 F: 403-730-6646 C: 403-860-9568 [email protected] www.calgaryheatingcooling.com
SMCAA • Sheet Metal Works 19
SMCAA MEMBERS
Calgary Tinsmith Industries Ltd. Jason Downey 616 - 35 Avenue N.E. Calgary, AB -T2E 2L1 P: 403-276-5306 F: 403-276-2112 [email protected] www.calgarytinsmith.com
Carrier Enterprise Canada L.P. Derek Chamberlin Bay 1, 3201 - Ogden Road S.E. Calgary, AB T2G 4N4 P: 403-287-4814 C: 403-561-1645 [email protected]
Cartel Mechanical Ltd. Gene Whitford 12148 - 129 Street Edmonton, AB T5L 1H2 P: 780-446-8002 F: 780-451-5911 C: 780-446-8002 [email protected]
Cascadia Metals Ltd. Jordon Schell #804A, 53016 Hwy 60 Acheson, AB T7X 5A7 P: 780-962-9006 F: 780-962-8008 C: 780-904-6004 [email protected] www.cmetals.com
City of Calgary - Heating Insp. Dept.#8114 Wade Patton P.O. Box 2100, Stn. M. Calgary, AB T2P 2M5 P: 403-268-8179 [email protected]
City of Edmonton Linda Girard 3rd Floor, 10250 - 101 Street Edmonton, AB T5J 3P4 P: 780-496-8468 F: 780-496-6054 C: 780-975-0251 [email protected] www.edmonton.ca
Clear Skies Heating & Air Conditioning Ltd. Shane Kyle 9505 - 41 Avenue Edmonton, AB T6E 5X7 P: 780-461-4411 F: 780-461-4477 [email protected] www.clearskiesheating.ca
Clearzone Services Ken Sakamoto 1929 - 46 Avenue S.W. Calgary, AB T2T 2R8 P: 403-463-8089 F: 403-273-1355 [email protected]
Crossroads C & I Distributors Inc. Garry Van Eerden #11, 5505 - 72 Avenue S.E. Calgary, AB T2C 3C4 P: 403-236-9760 F: 403-236-8661 [email protected]
Crossroads C & I Distributors Inc. Josh Riedyk 11104 - 180 Street Edmonton, AB T5S 2X5 P: 780-452-7410 F: 780-453-5715 C: 780-910-2025 [email protected] www.crossroadsci.com
Crosstown Heating & Vent. Ltd. Rita Popowich 4615 - 6A Street N.E. Calgary, AB T2E 4B4 P: 403-250-7424 F: 403-250-8279 [email protected]
D
Daikin North America Rob Smith 6855 Silver Ridge Way N.W. Calgary, AB T3B 5A1 P: 403-369-5565 F: 403-250-6546 [email protected]
Dee-Jay Plumbing & Heating Ltd. Doug Appleby 4328 - 41 Street Camrose, AB T4V 4E5 P: 780-679-4200 F: 780-679-4230 [email protected] www.dee-jay.ca
Diamond Fireplace - Napoleon Furnaces Jurgen Eichmann 7, 1305 - 33 Street N.E. Calgary, AB T2A 5P1 P: 403-365-4709 F: 403-273-7333 [email protected] www.diamondfireplace.com
Direct Air Ltd. Dale Ludwig 9157 - 21 Street S.E. Calgary, AB T2C 3Z4 P: 403-818-9782 F: 403-203-9781 [email protected]
Do It Right Heating & Air Conditioning Ltd. Kent Hough 13 Curlew Cres Sherwood Park, AB T8A 0H3 P: 780-699-9071 F: 780-416-0650 C: 780-699-9071 [email protected]
DR Heat & Air Ltd. Dan Douglas 463 Queen Charlotte Drive S.E. Calgary, AB T2J 4H2 P: 403-225-2077 F: 403-225-2017 [email protected] www.drheatandair.ca
E
E.H. Price Sales Limited Rick Davies #130, 2730 - 39 Avenue NE. Calgary, AB T1Y 7H6 P: 403-777-2790 F: 403-777-2791 [email protected]
E.H. Price Greg Terry 12944 - 148 Street Edmonton, AB T5L 2H8 P: 780-477-9231 F: 780-477-3701 C: 780-920-4078 [email protected] www.price-hvac.com
Ecco Supply - CGY Doug Kemsley Unit #11, 11150 - 38 Street S.E. Calgary, AB T2C 2Z6 P: 403-259-4344 F: 403-259-2772 [email protected]
Ecco Supply - EDM Al Firt 11415 - 184 Street Edmonton, AB T5S 0H1 P: 780-479-1946 F: 780-474-8500 [email protected] www.eccosupply.ca
ELDO Enterprises (1994) Ltd. Andrew Prevost Bay 9, 5935 - 35 Street SE. Calgary, AB T2C 2H1 P: 403-254-2053 F: 403-254-2053 [email protected] www.eldoenterprises.com
EMCO Corporation - Branch 781 David Mactavish 5480 - 76 Avenue S.E. Calgary, AB T2C 4S3 P: 403-258-2225 F: 403-640-1397 [email protected]
EMCO HVAC Glenn Hoban 10930 - 184 Street Edmonton, AB T5S 2P8 P: 780-452-3626 F: 780-454-9565 C: 780-982-0757 [email protected] www.emcoltd.com
Engineered Air (Calgary) Phil Fischer 1401 - Hastings Cres. S.E. Calgary, AB T2G 4C8 P: 403-287-2590 F: 403-287-4765 [email protected]
Engineered Air (Edmonton) Perry Zapernick 4266 91A Street Edmonton, AB T6E 5V2 P: 780-462-4101 F: 780-450-0641 [email protected] www.engineeredair.com
Enviro-Metrics Technical Services Ltd. Larry Reid 1121, 3961 52 Avenue N.E. Calgary, AB T3J 0J7 P: 403-250-1113 F: 403-250-1422 [email protected]
Expert HVAC Solutions Ltd. Terry Tetz 5, 1112 - 40 Avenue NE Calgary, AB T2E 5T8 P: 403-274-2621 F: 403-275-0368 [email protected]
20 March 2016 • www.smcaa.ca
SMCAA MEMBERS
F
Federated Insurance Wayne Budge PO Box 5800 Winnipeg, MB R3C 3C9 P: 204-295-0432 F: 204-784-6755 [email protected] www.federated.ca
Flexmaster Canada Ltd. Scott Richardsen Bay 1, 1329 - 45 Avenue N.E. Calgary, AB T2E 2P3 P: 403-277-3115 F: 403-276-1309 [email protected] www.flexmaster.com
Fuller Austin Inc. Ron Richards 11604 - 186 Street Edmonton, AB T5S 0C4 P: 780-452-1701 F: 780-452-4129 [email protected] www.fulleraustin.com
G
Gemco Fireplaces & Wholesale Htg. Prod. Gary Gould 9281 50 Street Edmonton, AB T6B 3B6 P: 780-465-9719 F: 780-468-5593 Toll free: 1-800-340-1149 [email protected] www.gemcofireplaces.com
Ghost Heating & Air Conditioning Ltd. Chris Anderson PO Box 1676, Stn Main Cochrane, AB T4C 1B5 P: 403-801-1339 [email protected]
Goodman Company Canada Russell Pipke 18043 - 111 Avenue Edmonton, AB T5S 2P2 P: 780-443-3072 F: 780-443-3450 C: 780-222-1197 [email protected] www.goodmanmfg.com
Hawk Custom Sheet Metal Ltd. Melvin Steer 4640 - 62 Street Red Deer, AB T4N 6T3 P: 403-340-8010 F: 403-343-8080 [email protected]
Heating Essentials Ltd. Randy Hodgins Bay 16, 21 Highfield Circle S.E. Calgary, AB T2G 5N6 P: 403-266-3678 F: 403-243-3138 [email protected]
HMI Hoyme Manufacturing Inc. Clifford Hoyme 4512 - 39 Street Camrose, AB T4V 2N5 P: 780-672-6555 F: 780-672-6554 [email protected] www.hoyme.com
Horizon Heating Ltd. Matthew Kramer #28, 666 Goddard Avenue NE Calgary, AB T2K 5X3 P: 403-274-0790 F: 403-275-4818 [email protected]
I
I.C.E. Northern Sales Mark Griffin #74, 4003 - 98 Street Edmonton, AB T6E 6M8 P: 780-461-7860 [email protected] www.ice-ww.com
Ignite Heating & Air Conditioning Daniel Bowie 248 Sandalwood Crescent Sherwood Park, AB T8H 0S5 P: 780-919-4916 [email protected] www.igniteheating.ca
Independent Supply Al Calley 11418 - 120 Street Edmonton, AB T5G 2Y2 P: 780-451-4744 F: 780-454-1072 [email protected] www.isc.tv
Iron Eagle Sheet Metal Ltd. Randy Greenlaw 708 East Lake Rise N.E. Airdrie, AB T4A 2H9 P: 403-948-1333 F: 403-948-1007 [email protected]
J
Johnson Controls Joe Spivak #104, 6046 12 Street SE Calgary, AB T2H 2X2 P: 403-640-1700 F: 403-640-1600 [email protected]
JSR Sheet Metal & Design Ltd. John Reimert 219 Oakhampton Pl SW Calgary, AB T2V 1S8 P: 403-251-1212 F: 403-251-1272 C: 403-617-7503 [email protected]
K
K.B. Heating & Air Conditioning Ltd. Keith Broadbent 3020 - 16 Avenue North Lethbridge, AB T1H 4E5 P: 403-328-0337 F: 403-328-0053 [email protected] www.kbheating.com
Kehoe Equipment Ltd. Darren McPherson 7605 - 50 Street NW Edmonton, AB T6B 2W9 P: 780-420-0040 F: 780-429-2571 [email protected] www.kel-hvac.com
L
L.A. Brayer Industries Ltd. Dean Brayer 3811 93 Street Edmonton, AB T6E 5K5 P: 780-462-4812 F: 780-462-0083 [email protected] www.labrayer.com
Leipert Plumbing & Heating Ltd. Larry Leipert Box 1300 Redcliff, AB T0J 2P0 P: 403-548-3224 F: 403-548-6134 [email protected]
Lennox Industries Canada Ltd. Denis Champagne 5350 - 86 Avenue S.E. Calgary, AB T2C 4L7 P: 403-279-8072 F: 403-236-5138 [email protected]
Luced Services Ltd. Lou Bourque 12104 - 121A Street Edmonton, AB T5L 0A4 P: 780-732-0009 F: 780-476-0016 [email protected] www.lucedservices.com
M
Mar-Ko Metal Products Inc. Glen or Gary Marchand 12417 67 Street Edmonton, AB T5B 1N2 P: 780-471-2357 F: 780-474-3673 C: 780-718-6707 [email protected] www.markometalproducts.co
Marlborough Sheet Metal & Design Ltd. Jason Novakowski 2280 Pegasus Way NE Calgary, AB T2E 8M5 P: 403-250-2550 F: 403-291-2504 [email protected]
McKinley Heating & Air Conditioning Brian Baron 11122 - 156 Street Edmonton, AB T5M 1Y1 P: 780-474-1481 F: 780-474-0539 [email protected] www.mckinleyheating.com
McMullen’s Refrigeration b& Heating Ltd. Dennis Shannon 209, 37428 Range Road 273 Red Deer County, AB T4E 0A1 P: 403-342-1155 F: 403-347-5530 [email protected]
Midwest Engineering (AB) Ltd. (Calgary) 117, 10836 - 24 Street SE Calgary, AB T2Z 4C9 P: 403-287-1018 F: 403-287-1139
Midwest Engineering (AB) Ltd. (Edmonton) Kent Hansen 11711 - 170 Street Edmonton, AB T5M 3W7 P: 780-448-9509 F: 780-448-1377 C: 780-887-5368 [email protected] www.midwestengineering.ca
SMCAA • Sheet Metal Works 21
M & L Heating & Air Ltd. Mark Farrow 4607 - 111A Street Edmonton, AB T6H 3G4 P: 780-907-5633 F: 780-437-7661 C: 780-907-5633 [email protected]
Monterro Sheet Metal Ltd. Antonio Montefresco Airdrie, AB P: 403-333-1013 F: 403-912-5696 [email protected] www.air-monterro.com
Movin’ Air Sheet Metal Ltd. Allan Helpin #26, 4550 - 112 Avenue S.E. Calgary, AB T2C 2K2 P: 403-225-6082 F: 403-225-6083 [email protected] [email protected] www.movinair.com
Murray’s Sheet Metal Ltd. Brad Murray #6 Frontier Road S.E. Rocky View, AB T1X 0N2 P: 403-285-0613 F: 403-250-0220 [email protected]
N
Nailor Industries Inc. Vi Gerasen Bay E, 4427 72 Avenue SE Calgary, AB T2C 2C1 P: 403-279-8619 F: 403-279-5035
N.A.I.T. Patricia Campus Mike Vader 12204 149 Street Edmonton, AB T5V 1A1 P: 780-378-3703 F: 780-453-5405 C: 780-984-6565 [email protected] www.nait.ab.ca
Nordic Mechanical Ltd. Robert Schlegl 7798 -16 Street Edmonton, AB T6P 1L9 P: 780-469-7791 F: 780-469-1932 C: 780-818-4915 [email protected]
NuJen Inc. Trevor Mark 7812 Coronet Road N.W. Edmonton, AB T6E 4N8 P: 780-438-2012 F: 888-558-4641 C: 780-490-8113 [email protected]
Nu-Trend Industries Joel Brown 120 Glacier Drive S.W. Calgary, AB T3E 5A1 P: 403-247-4342 F: 403-247-3747 C: 403-862 4147 [email protected]
O-P
Olympic Integrated Services Inc. Colin Andrews 2226 Portland St. S.E. Calgary, AB T2G 4M6 P: 587-955-9957 C: 403-312-7861 [email protected]
Pete the Plumber Andrew Prince Bay 14, 4550-112 Avenue S.E. Calgary, AB T2C 2K2 P: 403-257-1766 F: 403-257-1736 C: 403-369-3458 [email protected]
R
Radius Mechanical Ltd. Sandi Gillespie 11320 - 154 Street Edmonton, AB T5M 1X7 P: 780-447-1697 F: 780-452-2008 [email protected]
Reliance The Furnace Company Collin Goodyear 8545 - Coronet Road Edmonton, AB T6E 4N7 P: 780-430-4385 F: 780-469-8988 [email protected] www.reliancehomecomfort.com
RJ Savoie Inc. Rick Savoie 616 Schooner Cove N.W. Calgary, AB T3L 1Z1 P: 403-860-4939 F: 403-241-6082 [email protected]
RL & T HVAC Rod Ketcheson P.O. Box 291, Longview, AB T0L1H0 P: 587-215-3945 F: 403-558-2261 C: 587-215 3945 [email protected]
Rosedale Sheet Metal (2002) Ltd. James Mutzeneek 2610 - 3rd Avenue N.E. Calgary, AB T2A 2L5 P: 403-569-0005 F: 403-569-0282 [email protected]
Ruff In Industries Kurt Parsons Box 8101 Station A Calgary, AB T2H 0H6 P: 403-969-3664 F: 403-313-9249 [email protected] www.ruffin.ca
Ryerson Canada Inc. Ray Pasta 7910 - 40 Street S.E. Calgary, AB T2C 2Y3 P: 403-250-2866 F: 403-250-9894 [email protected]
S
SAIT Polytechnic - School of Construction Duane Sylvester 1301, 16 Avenue NW., B242D Calgary, AB T2M 0L4 P: 403-284-8225 F: 403-210-4271 [email protected] www.sait.ca
Samuel Coil Processing Craig Campbell 1401 - 17 Avenue S.E. Calgary, AB T2G 1J9 P: 403-531-0600 F: 403-237-0524 [email protected]
Samuel, Son & Co. Ltd. Darryl McTurk 9525 - 60 Avenue Edmonton, AB T6E 0C3 P: 780-955-4777 F: 780-438-7224 C: 780-766-8485 [email protected] www.samuel.com
Serv-All Mechanical Services Ltd. Laurie Culbert 18120 107 Avenue Edmonton, AB T5S 1K5 P: 780-484-6681 F: 780-484-2029 [email protected] www.serv-all.ca
Service Experts (Central Heating) Bud Montgomery 8002, 11500 - 35 Street S.E. Calgary, AB T2Z 3W4 P: 403-279-5760 F: 403-236-8301 C: 403-818-6498 [email protected]
Service Experts (Accent Heating) Justin Rice 4918 - 72 Avenue Edmonton, AB T6B 2K2 P: 780-465-9112 F: 780-465-0460 C: 780-203 2706 [email protected] www.robsalbertan.ca
Sheet Metal Workers Int. Assoc. Douglas Worobetz 17310 - 106 Avenue N.W. Edmonton, AB T2S 1H9 P: 780-426 -3375 F: 780-426-1694 C: 780-914-9188 [email protected] www.local8.ca
Shel-B Sales Bill Lowe #154, 5255 McCall Way N.E. Calgary, AB T2E 7J5 P: 403-770-9322 F: 403-252-2905 C: 403-870-1765 [email protected]
Sinclair Supply Ltd. (Calgary) Ken Litwin 4033 - 9 Street SE Calgary, AB T2G 3C7 P: 403-571-6340 F: 403-243-1794 [email protected]
Sinclair Supply Ltd. (Edmonton) Dan Sorochan 10914 120 Street Edmonton, AB T5H 3P7 P: 780-452-3110 F: 780-455-5064 [email protected] www.sinclairsupply.ca
SMCAA MEMBERS
22 March 2016 • www.smcaa.ca
Spring’s Servicing & Heating Ltd. Dominic Muto 337 Canova Close S.W. Calgary, AB T2W 5W9 P: 403-253-1888 F: 403-252-6811 [email protected]
Stanama Heating & Air Conditioning Ltd. Stan Northam R.R. #3 Eckville, AB TOM 0X0 P: 403-550-3870 [email protected]
Star Mechanical Edmonton Ltd. Darren Zanatta 12928 - 170 Street N.W. Edmonton, AB T5V 0B4 P: 780-481-8873 F: 780-481-8873 C: 780-242-4796 [email protected]
T
Tarpon Energy Services Grant Beaver 7020 - 81 Street S.E. Calgary, AB T2C 5B8 P: 403-232-5435 F: 403-234-8648 [email protected] www.tarponenergy.com
Total Plumbing & Heating Darrren Broesky 9855 - 107 Street Westlock, AB T7P 1R9 P: 780-349-4005 F: 780-349-6539 C: 780-307-4533 [email protected] www.weplumb.ca
Tradesman Manufacturing David Warkentin 4437 - 8 Avenue North Lethbridge, AB T1H 6W5 P: 403-327-9871 F: 403-329-9079 [email protected] www.tradesmanmfg.ca
Trane Northwest, a Division of Trane Canada ULC Drew Kells 10456 Mayfield Road NW Edmonton, AB T5P 4P4 P: 780-342-2400 F: 780-454-2174 [email protected] www.trane.com
Tri-Alta Mechanical (1997) Ltd. Blaine Lockie 3515F - 32 Street NE Calgary, AB T1Y 5Y9 P: 403-250-5781 F: 403-291-2928 [email protected]
Trotter & Morton Building Technologies Inc. Jim Northam 5711 - 1 Street SE Calgary, AB T2H 1H9 P: 403-255-7535 F: 403-640-0767 [email protected]
Two Guys HVAC Ltd. Garry Moodie 602 - 26 Avenue N.W. Calgary, AB T2M 2E5 P: 403-291-5430 F: 403-277-5450 [email protected]
U-V
Universal Ventilation Ltd. Wellington Evans 122 - 53 Avenue SE Calgary, AB T2H 1N4 P: 403-516-1966 F: 403-516-1962 [email protected] www.universalventilation.com
Vet’s Sheet Metal Ltd. Sean Rayner 6111 - 56 Avenue Edmonton, AB T6B 3E2 P: 780-434-7476 F: 780-437-6130 [email protected] www.vetsgroup.com
W
W.J.L. Heating & Air Conditioning Ltd. Bill Lamb Box 1, Site 16, RR #7 Calgary, AB T2P 2G7 P: 403-936-5838 F: 403-936-5747 [email protected]
Weiss-Johnson Sheet Metal Ltd. Dennis Johnson 5803 Roper Road N.W. Edmonton, AB T6B 3L6 P: 780-463-3096 F: 780-465-4726 [email protected] www.weiss-johnson.com
West Air Sheet Metal Ltd. Sandy Volponi 1238 - 45 Avenue N.E. Calgary, AB T2E 2P1 P: 403-250-7518 F: 403-250-2849 [email protected]
Western Air & Power Ltd. Nevin Burne 1919 Highfield Cr. SE Calgary, AB T2G 5M1 P: 403-243-2822 F: 403-243-2720 [email protected]
Western Mechanical Kyle Nelson 13111 - 135th Avenue N.W. Edmonton, AB T5L 3Y1 P: 780-720-7830 F: 604-324-1434 [email protected] www.westernmechanical.ca
WHS Heating Tyler Fisher 219 Exploration Avenue S.E. Calgary, AB T3S 0B6 P: 403-369-4777 [email protected]
Wiebe Forest Engineering, a Division of SNC-Lavalin Inc. Marc Kadziolka 3613 - 33 Street NE Calgary, AB T2L 2A7 P: 403-670-7300 F: 403-670-7301
Wil-Den Mechanical Ltd. Dennis Fischer Box 1118 Medicine Hat, AB T1A 7H3 P: 403-526-3958 F: 403-529-5616
Windmill Mechanical Services Ltd. Gerrit Langejans #16, 2235 - 30 Avenue NE Calgary, AB T2E 7C7 P: 403-735-0770 F: 403-735-0771 [email protected]
Winter Heating Ltd. Brian Winter 522 Fairways Cres N.W. Airdrie, AB T4B 2Y P: 587-777-4271 F: 403-980-0296 [email protected]
WM Schmidt Mechanical Joe Webster 4603D - 13 Street N.E. Calgary, AB T2E 6M3 P: 403-219-1229 F: 403-250-8956 [email protected]
Wolseley Mechanical Group (HVAC) Ron Alsop Bay #5, 10775 - 42 Street S.E. Calgary, AB T2C 5B2 P: 403-214-6408 F: 403-259-8283 [email protected]
Federated Insurance.Proudly recommendedby the SMCAA for yourbusiness insurance needs.
Brad Olson403.254.8500 x3723800.342.9157www.federated.ca
SMCAA MEMBERS
SMCAA • Sheet Metal Works 23
SMCAA Sheet Metal Works 30
Preferred insurance partner of over 50 associations across Canada
• 100% Canadian-owned• Insuring businesses across Canada for over 95 years• Industry insurance specialists• Member of the Fairfax Financial family (TSX: FFH.TO)• Rated “A (Excellent)” by A.M. Best
The risks you face as a business owner are unique. Federated Insurance offers coverage that’s specific to your needs – we have one of the most comprehensive and specialized programs for businesses in Canada.
Protection for all that matters to your business
Your property and its contents, your employees, your day-to-day operations…these are all the things you need to consider when insuring your business. Federated Insurance can help you protect:
• Your property • Your employees• You against liability• You against crime
Customized insurance solutions
Not only do you need insurance coverage that’s specific to your needs, you also need an insurance company who understands the unique risks you face each and every day.
We provide*:
• Dedicated advisors to give you expert advice and support• Customized insurance solutions tailored to your business• Expanded coverage options• Flexible payment and deductible options• Complimentary loss prevention programs to help protect you and your business• Superior claims handling to get your company back up and running as quickly as possible
Federated Insurance is committed to working closely with our industry association partners and members like you to develop tailored solutions that meet the unique needs of your business.
And, you deal with us directly. There’s no middle man so we can pass all the value on to you.
We’d love to hear from you. Call us today at 1.800.665.1934Visit us at www.federated.ca
Policies underwritten by Federated Insurance Company of Canada. *The above is a description of the coverage and solutions available. Policy terms, conditions, and exclusions apply. Please contact us for more information and refer to the policy wording for details.
Thank you for all donations
SMCAA would like to thank all the hole sponsors and companies who provided monetary donations. Thank you also to Nordic Mechanical, who sponsored the breakfast, and to E.H. Price, who sponsored the water on the carts!
Ken Fulmer with Nordic Mechanical won the 50/50 draw ($680) and donated it back to the SMCAA Scholar-ship Program.
A big thank-you to those who purchased the tickets for the 50/50 draw and the Mulligans. Edmonton’s tourna-ment raised $3,190 towards our scholarship program bringing our funds raised to date to $19,805 in the past three years! ❖
Edmonton Scholarship
Sheet Metal Contractors Association of Alberta
ThankYou!
SMCAA in Edmonton held their Scholarship Classic on June 25, 2015, at The Quarry Golf Course. The weather was amazing, and so was the course!
Congratulations to the Scramble Team Winners!
Congratulations to team Sinclair on their win with a score of 58.
Team Sinclair:Roger Lacoursiere, SinclairMike Coughlan, Setanta (Guest)Chris O’Connor, Celtic (Guest)Dwayne Brook, Sinclair
Team Sinclair 2015
Martin Nowakowski, Prostate Cancer
Martin Nowakowski with Prostate Cancer presented theEdmonton Scholarship Classic with a cheque for $600
towards our Scholarship.
Martin not only donated $600 at the Edmonton tournament, he also donated$500 at the Calgary Tournament on June 17. Since 2013, Martin has donated a
total of $2,250 to our Scholarship Program!
Thank you, Martin, for your kind donations!
SMCAA Sheet Metal Works 30
Preferred insurance partner of over 50 associations across Canada
• 100% Canadian-owned• Insuring businesses across Canada for over 95 years• Industry insurance specialists• Member of the Fairfax Financial family (TSX: FFH.TO)• Rated “A (Excellent)” by A.M. Best
The risks you face as a business owner are unique. Federated Insurance offers coverage that’s specific to your needs – we have one of the most comprehensive and specialized programs for businesses in Canada.
Protection for all that matters to your business
Your property and its contents, your employees, your day-to-day operations…these are all the things you need to consider when insuring your business. Federated Insurance can help you protect:
• Your property • Your employees• You against liability• You against crime
Customized insurance solutions
Not only do you need insurance coverage that’s specific to your needs, you also need an insurance company who understands the unique risks you face each and every day.
We provide*:
• Dedicated advisors to give you expert advice and support• Customized insurance solutions tailored to your business• Expanded coverage options• Flexible payment and deductible options• Complimentary loss prevention programs to help protect you and your business• Superior claims handling to get your company back up and running as quickly as possible
Federated Insurance is committed to working closely with our industry association partners and members like you to develop tailored solutions that meet the unique needs of your business.
And, you deal with us directly. There’s no middle man so we can pass all the value on to you.
We’d love to hear from you. Call us today at 1.800.665.1934Visit us at www.federated.ca
Policies underwritten by Federated Insurance Company of Canada. *The above is a description of the coverage and solutions available. Policy terms, conditions, and exclusions apply. Please contact us for more information and refer to the policy wording for details.
SMCAA • Sheet Metal Works 25
SMCAA Sheet Metal Works 28
CalendeR Of eventS
January
January 14: ATCCC Meeting (Prompt Payment)Where: Black Knight Inn, Red DeerTopic: Agenda: Next Steps
January 19: Calgary Members Meeting-Dinner Where: Toad & Turtle, Calgary Topic: Assoc.update & speaker: Karen Turner, Turner Efficiencies
January 20: Provincial Board Meeting (AM) Where: Sheraton Hotel, Red Deer Topic: Board Meeting
January 20: Strategic Planning Session (PM) Where: Sheraton Hotel, Red Deer Topic: Strategic Planning Session
January 21: EDM. Technical Liaison Committee Where: Accent Heating, 10:00AM
January 21: Edmonton Members Meeting-Dinner Where: Druid Irish Pub Topic: Assoc.update & speaker: Karen Turner, Turner Efficiencies
April 4-15: Office ClosedWhere: Holidays
April 7: Career ShowWhere: Bert Church HS, AirdrieTopic: Career Show
April 20: CCA Career ExpoWhere: BMO Centre, CalgaryTopic: Career Show
April 21: EDM. Technical Liaison CommitteeWhere: Location TBA Topic: Agenda: TBA
April 26: Calgary OldtimersWhere: Heritage Park, Wainright HotelTopic: Celebration of new oldtimers
February 8 to 13: Office Closed Where: Holidays
February 18: Career Fair Where: James Fowler HS, Calgary Topic: Career Show
February 18: EDM. Technical Liaison Committee Where: Location TBA Topic: Agenda: TBA
February 18: Edmonton Members Meeting - Dinner Where: Hudson’s Pub - South Common Topic: Joan Maisonneuve, CHBA
February 23: Calgary Dinner Meeting - Dinner Where: TBA Topic: Agenda: TBA
February 24: Career Fair Where: Lord Beaverbrook HS, Calgary Topic: Career Show
May 5: Sheet Metal ShowcaseWhere: SAIT, CalgaryTopic: Showcase the Sheet Metal Trade to high school students
May 10-12: Provincial Skills CompetitionWhere: Edmonton Expo CentreTopic: Career Show
May 19: EDM. Technical Liaison CommitteeWhere: Location TBATopic: Agenda: TBA
May 19: Sheet Metal ShowcaseWhere: NAIT, EdmontonTopic: Showcase the Sheet Metal Trade to high school students
May 25: SMACNA SeminarWhere: Edmonton Construction AssociationTopic: 5 Key Secrets of Successful Communicators
May 25: Lobsterfest - 60th AnniversaryWhere: Thorncliffe Community CentreTopic: LOBSTERS!!! & STEAK!
May 26-28: SMCAA ConventionWhere: CopperPoint Resort, Invermere, B.C.
MayApril
February March
March 15: Provincial Board MeetingWhere: Sheraton Hotel, Red DeerTopic: Agenda: TBA
March 16: Career Fair Where: Father Lacombe HS, CalgaryTopic: Career Show
March 17: EDM. Technical Liaison Committee Where: Location TBA Topic: Agenda: TBA
March 17: Edmonton Members Meeting-Dinner Where: Location TBA Topic: Agenda: TBA
March 23: Calgary Dinner Meeting-Dinner Where: SAIT - Highwood RestaurantTopic: Agenda: TBA
June 2: Golf TournamentWhere: Elks Club, Calgary
June 16: EDM. Technical Liaison CommitteeWhere: Location TBA Topic: Agenda: TBA
June 21: Calgary Members MeetingWhere: Location TBA Topic: Agenda: TBA
June 24: Golf TournamentWhere: The Quarry GC, EdmontonTopic: Golf Tournament
July - August: No Events
June
July - August
CALENDAR OF EVENTS
26 March 2016 • www.smcaa.ca
SMCAA Sheet Metal Works 29
September
September 15: EDM. Technical Liaison CommitteeWhere: Location TBA Topic: Agenda: TBA
September 15: Edmonton Members Meeting Where: Location TBA Topic: Agenda: TBA
September 19: Provincial Board MeetingWhere: Riverbend Golf CourseTopic: Agenda: TBA
September 19: Provincial Golf Tournament (PM)Where: Riverbend Golf CourseTopic: Golf Tournament
September 27: Calgary Members MeetingWhere: Location TBA Topic: Agenda: TBA
October 18: Provincial Board MeetingWhere: Location TBA Topic: Agenda: TBA
October 20: EDM. Technical Liaison CommitteeWhere: Location TBA Topic: Agenda: TBA
October 20: Edmonton Members Meeting Where: Location TBA Topic: Agenda: TBA
October 25: Calgary Members MeetingWhere: Location TBA Topic: Agenda: TBA
October
November 15: Provincial Board MeetingWhere: Location TBA Topic: Agenda: TBA
November 17: EDM. Technical Meeting Where: Location TBA Topic: Agenda: TBA
November 22: Calgary Members MeetingWhere: Location TBA Topic: Agenda: TBA
December 3: Christmas GalaWhere: Grey Eagle Casino, Calgary
November
December
2725 12 St. NE, #203 Calgary, Alberta T2E-7J2
P. (403) 250-7040www.smcaa.ca
Sheet Metal Works
CalendeR Of eventSCALENDAR OF EVENTS
Sheet Metal Contractors Association of Alberta
2725 12 St. NE, #203 Calgary, AB T2E 7J2 403-250-7040 www.smcaa.ca
Glen MarchandPRESIDENT, CO-OWNER [email protected]
Gary MarchandCO-OWNER [email protected]
Mar-Ko Metal Products Inc. 12417 - 67 St. NW, Edmonton, AB T5B 1N2
T: 780.471.2357 | F: 780.474.3673
M E TA L P R O D U C T S I N C
SINCE 1968
Stainless Steel, Aluminum & Mild Steel
CUSTOM METAL FABRICATORS
MAR KOBuilding – Informing – Supporting
Promoting – Educating Alberta’s HVAC Industry
The Sheet Metal Contractors Association of Alberta (SMCAA) is our province’s chapter of theSheet Metal and Air Conditioning Contractors’ National Association (SMACNA) and includes
members from fellow HVAC contractors, suppliers and manufacturers.
SMCAA Membership Has Its Advantages
SMCAA • Sheet Metal Works 27
A LEADING POLYTECHNICCOMMITTED TO STUDENT SUCCESS
NAIT (the Northern Alberta Institute of Technology), is one of only two schools in the province offering a full-complement, four-period program of sheet-met-al apprenticeship training. NAIT has been training
sheet metal workers since 1962.Located at our Patricia Campus (12204 149 Street), the pro-
gram offers 336 student seats this year (2015-16).Our 14 instructors have diverse experience from every as-
pect of the trade – industrial, residential, service, installation and manufacturing.
The program includes instruction in all elements of sheet metal work in a variety of industries and a settings, from HVAC systems to lab equipment to architectural and ornamental ob-jects. Apprentices are also trained in residential, commercial and industrial blueprint-reading. Students spend half their day in classrooms and labs, and the other half in the shop applying what they have learned and refining their skills.
We work closely with the RAP (Registered Apprenticeship Program) in high schools. During last year’s career fair, we pro-vided instructors to assist potential young apprentices with the opportunity to gain some insight into our trade by creating a project of their own.
NAIT is a leading Canadian polytechnic known for its hands-on, technology-based learning. NAIT serves close to 60,000 credit and non-credit students and has a 95 per cent em-ployer satisfaction rating. ❖
For more information about the sheet metal program, go towww.nait.ca.
NAIT
28 March 2016 • www.smcaa.ca
The R-Corners™ are a new addition to our fabrication shop! They provide filled corners on flanges, will save on
shipping costs and are easy to install on site.
R-Corner™ benefits include:• Unassembled product takes up less space for shops & jobsites• Fills flange sizes from ½” to 4” (custom sizes & gauges available)• Can be installed on jobsite with hand seamers or hammer• Can ship duct flat to save on crane/shipping space• Takes a fraction of time compared to spot welding• Closes flanged end on duct drops
Stop by Rosedale to check them out today!
2610 3rd Avenue NECalgary, AB T2A [email protected]
Ph. (403) 569-0005Fax. (403) 569-0282
With 22,000sqft of shop space, we will meet all of your custom metal needs!
COMMERCIAL & RESIDENTIAL HVAC. CUSTOM FABRICATION.“YOUR SHOP SINCE 2002”
Alberta Blue Cross 2016 SMCAA magazine- Outside back cover/ Full colour - Trim Size: 8.375” x 10.875”RUN March 2016
Control your group bene� t plan costs…without compromising choice or � exibility.
As Alberta’s largest bene� t provider, Alberta Blue Cross delivers industry-leading plan management and cost containment to meet the needs of Alberta employers through challenging economic times.
If your employer group plan isn’t with Alberta Blue Cross yet, now is the right time to consider switching. Call us today for a con� dential no-obligation quote, or talk to your plan advisor.
Edmonton780-498-8500
Calgary403-294-4004
Grand Prairie780-532-3507
Lethbridge403-328-6081
Medicine Hat403-529-5550
Red Deer403-347-7999
Prescription Drugs • Dental • Extended Health • Travel Coverage • Life and Disability • VisionSpending Accounts • Critical Illness • Employee and Family Assistance Program
®* The Blue Cross symbol and name are registered marks of the Canadian Association of Blue Cross Plans, an association of independent Blue Cross plans. Licensed to ABC Benefits Corporation for use in operating the Alberta Blue Cross Plan. ® † Blue Shield is a registered trade-mark of the Blue Cross Blue Shield Association. ABC 83420 2016/03
Toll free 1-866-513-2555www.ab.bluecross.ca